summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2017-04-17qed: aRFS infrastructure supportChopra, Manish
This patch adds necessary APIs to interface with qede aRFS support in successive patch. It also reserves separate PTT entry for aRFS, [as being in fastpath flow] for hardware access instead of trying to acquire it at run time from the ptt pool. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17smsc95xx: Add comments to the registers definitionMartin Wetterwald
This chip is used by a lot of embedded devices and also by the Raspberry Pi 1, 2 & 3 which were created to promote the study of computer sciences. Students wanting to learn kernel / network device driver programming through those devices can only rely on the Linux kernel driver source to make their own. This commit adds a lot of comments to the registers definition to expand the register names. Cc: Steve Glendinning <steve.glendinning@shawell.net> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> CC: David Miller <davem@davemloft.net> Signed-off-by: Martin Wetterwald <martin@wetterwald.eu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Steve Glendinning <steve.glendinning@shawell.net> Acked-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: thunderx: Fix set_max_bgx_per_node for 81xx rgxGeorge Cherian
Add the PCI_SUBSYS_DEVID_81XX_RGX and use the same to set the max bgx per node count. This fixes the issue intoduced by following commit 78aacb6f6 net: thunderx: Fix invalid mac addresses for node1 interfaces With this commit the max_bgx_per_node for 81xx is set as 2 instead of 3 because of which num_vfs is always calculated as zero. Signed-off-by: George Cherian <george.cherian@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: E-switch vport manager is valid for ethernet onlySaeed Mahameed
Currently the driver support only ethernet eswitch, and we want to protect downstream IPoIB netdev from trying to access it in IB link. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, RX handlerSaeed Mahameed
Implement IPoIB RX SKB handler. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: RX handlers per netdev profileSaeed Mahameed
In order to have different RX handler per profile, fix and refactor the current code to take the rx handler directly from the netdevice profile rather than computing it on runtime as it was done with the switchdev mode representor rx handler. This will also remove the current wrong assumption in mlx5e_alloc_rq code that mlx5e_priv->ppriv is of the type vport_rep. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, Xmit flowSaeed Mahameed
Implement mlx5e's IPoIB SKB transmit using the helper functions provided by mlx5e ethernet tx flow, the only difference in the code between mlx5e_xmit and mlx5i_xmit is that IPoIB has some extra fields to fill (UD datagram segment) in the TX descriptor (WQE) and it doesn't need to have any vlan handling. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: Xmit flow break downSaeed Mahameed
Break current mlx5e xmit flow into smaller blocks (helper functions) in order to reuse them for IPoIB SKB transmission. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, Underlay QPSaeed Mahameed
Create IPoIB underlay QP needed by the IPoIB netdevice profile for RSS and TX HW context to perform on IPoIB traffic. Reset the underlay QP on dev_uninit ndo to stop IPoIB traffic going through this QP when the ULP IPoIB decides to cleanup. Implement attach/detach mcast RDMA netdev callbacks for later RDMA netdev use. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, Basic netdev ndos open/closeSaeed Mahameed
Implement open/close of IPoIB netdevice ndos using mlx5e's channels API to manage data path resources (RQs/SQs/CQs). Set IPoIB netdev address on dev_init ndo. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, TX TIS creationSaeed Mahameed
Modify mlx5e tis creation function to accept underlay qp number, which will be needed by IPoIB. Implement mlx5i (IPoIB) tx init/cleanup netdevice profile flows to create one TIS with the IPoIB underlay qp, for IPoIB TX SQs. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, RSS flow steering tablesSaeed Mahameed
Like the mlx5e ethernet mode, on IPoIB mode we need to create RX steering tables, but IPoIB do not require MAC and VLAN steering tables so the only tables we create in here are: 1. TTC Table (Traffic Type Classifier table for RSS steering) 2. ARFS Table (for accelerated RFS support) Creation of those tables is identical to mlx5e ethernet mode, hence the use of mlx5e_create_ttc_table and mlx5e_arfs_create_tables. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, RX steering RSS RQTs and TIRsSaeed Mahameed
Implement IPoIB RX RSS (RQTs and TIRs) HW objects creation, All we do here is simply reuse the mlx5e implementation to create direct and indirect (RSS) steering HW objects. For that we just expose mlx5e_{create,destroy}_{direct,indirect}_{rqt,tir} functions into en.h and call them from ipoib.c in init/cleanup_rx IPoIB netdevice profile callbacks. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: IPoIB, Add netdevice profile skeletonSaeed Mahameed
Create mlx5e IPoIB netdevice profile skeleton in the new ipoib.c file with empty implementation. Downstream patches will provide the full mlx5 rdma netdevice acceleration support for IPoIB into this new file, by using the mlx5e netdevice profile and new mlx5_channels APIs and infrastructures. Same as already done in mlx5e NIC netdevice and switchdev mode VF representors. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5e: More generic netdev management APISaeed Mahameed
In preparation for mlx5e RDMA net_device support, here we generalize mlx5e_attach/detach in a way that those functions will be agnostic to link type. For that we move ethernet specific NIC net device logic out of those functions into {nic,rep}_{enable/disable} mlx5e NIC and representor profiles callbacks. Also some of the logic was moved only to NIC profile since it is not right to have this logic for representor net device (e.g. set port MTU). Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5: Enable flow-steering for IB linkErez Shitrit
Get the relevant capabilities if supports ipoib_enhanced_offloads and init the flow steering table accordingly. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net/mlx5: Refactor create flow table method to accept underlay QPErez Shitrit
IB flow tables need the underlay qp to perform flow steering. Here we change the API of the flow tables creation to accept the underlay QP number as a parameter in order to support IB (IPoIB) flow steering. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17hv_netvsc: Exclude non-TCP port numbers from vRSS hashingHaiyang Zhang
Azure hosts are not supporting non-TCP port numbers in vRSS hashing for now. For example, UDP packet loss rate will be high if port numbers are also included in vRSS hash. So, we created this patch to use only IP numbers for hashing in non-TCP traffic. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17hv_netvsc: Fix the queue index computation in forwarding caseHaiyang Zhang
If the outgoing skb has a RX queue mapping available, we use the queue number directly, other than put it through Send Indirection Table. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17sfc: limit the number of receive queuesBert Kenward
The number of rx queues is determined by the rss_cpus parameter or the cpu topology. If that is higher than EFX_MAX_RX_QUEUES the driver can corrupt state. Fixes: 8ceee660aacb ("New driver "sfc" for Solarstorm SFC4000 controller.") Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts were simply overlapping changes. In the net/ipv4/route.c case the code had simply moved around a little bit and the same fix was made in both 'net' and 'net-next'. In the net/sched/sch_generic.c case a fix in 'net' happened at the same time that a new argument was added to qdisc_hash_add(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Things seem to be settling down as far as networking is concerned, let's hope this trend continues... 1) Add iov_iter_revert() and use it to fix the behavior of skb_copy_datagram_msg() et al., from Al Viro. 2) Fix the protocol used in the synthetic SKB we cons up for the purposes of doing a simulated route lookup for RTM_GETROUTE requests. From Florian Larysch. 3) Don't add noop_qdisc to the per-device qdisc hashes, from Cong Wang. 4) Don't call netdev_change_features with the team lock held, from Xin Long. 5) Revert TCP F-RTO extension to catch more spurious timeouts because it interacts very badly with some middle-boxes. From Yuchung Cheng. 6) Fix the loss of error values in l2tp {s,g}etsockopt calls, from Guillaume Nault. 7) ctnetlink uses bit positions where it should be using bit masks, fix from Liping Zhang. 8) Missing RCU locking in netfilter helper code, from Gao Feng. 9) Avoid double frees and use-after-frees in tcp_disconnect(), from Eric Dumazet. 10) Don't do a changelink before we register the netdevice in bridging, from Ido Schimmel. 11) Lock the ipv6 device address list properly, from Rabin Vincent" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits) netfilter: ipt_CLUSTERIP: Fix wrong conntrack netns refcnt usage netfilter: nft_hash: do not dump the auto generated seed drivers: net: usb: qmi_wwan: add QMI_QUIRK_SET_DTR for Telit PID 0x1201 ipv6: Fix idev->addr_list corruption net: xdp: don't export dev_change_xdp_fd() bridge: netlink: register netdevice before executing changelink bridge: implement missing ndo_uninit() bpf: reference may_access_skb() from __bpf_prog_run() tcp: clear saved_syn in tcp_disconnect() netfilter: nf_ct_expect: use proper RCU list traversal/update APIs netfilter: ctnetlink: skip dumping expect when nfct_help(ct) is NULL netfilter: make it safer during the inet6_dev->addr_list traversal netfilter: ctnetlink: make it safer when checking the ct helper name netfilter: helper: Add the rcu lock when call __nf_conntrack_helper_find netfilter: ctnetlink: using bit to represent the ct event netfilter: xt_TCPMSS: add more sanity tests on tcph->doff net: tcp: Increase TCP_MIB_OUTRSTS even though fail to alloc skb l2tp: don't mask errors in pppol2tp_getsockopt() l2tp: don't mask errors in pppol2tp_setsockopt() tcp: restrict F-RTO to work-around broken middle-boxes ...
2017-04-14Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes from Michael S. Tsirkin: "virtio oops fixes The virtio pci rework using shared interrupts caused a lot of issues. We tried to fix them but run out of time. Revert for now, and revisit the issue for the next kernel. Luckily we are able to do this without loosing automatic interrupt NUMA affinity which was the main motivator for the rework" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-pci: Remove affinity hint before freeing the interrupt Revert "virtio_pci: remove struct virtio_pci_vq_info" Revert "virtio_pci: use shared interrupts for virtqueues" Revert "virtio_pci: don't duplicate the msix_enable flag in struct pci_dev" Revert "virtio_pci: simplify MSI-X setup" Revert "virtio_pci: fix out of bound access for msix_names" MAINTAINERS: fix virtio file pattern virtio_console: fix uninitialized variable use virtio_net: clear MTU when out of range virtio: allow drivers to validate features virtio_net: enable big packets for large MTU values
2017-04-13netlink: pass extended ACK struct where availableJohannes Berg
This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: pass extended ACK struct to parsing functionsJohannes Berg
Pass the new extended ACK reporting struct to all of the generic netlink parsing functions. For now, pass NULL in almost all callers (except for some in the core.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13bonding: handle link transition from FAIL to UP correctlyMahesh Bandewar
When link transitions from LINK_FAIL to LINK_UP, the commit phase is not called. This leads to an erroneous state causing slave-link state to get stuck in "going down" state while its speed and duplex are perfectly fine. This issue is a side-effect of splitting link-set into propose and commit phases introduced by de77ecd4ef02 ("bonding: improve link-status update in mii-monitoring") This patch fixes these issues by calling commit phase whenever link state change is proposed. Fixes: de77ecd4ef02 ("bonding: improve link-status update in mii-monitoring") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13net: dwc-xlgmac: add the initial ethtool supportJie Deng
It is necessary to provide ethtool support for displaying and modifying parameters of dwc-xlgmac. Signed-off-by: Jie Deng <jiedeng@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13net: stmmac: set total length of the packet to be transmitted in TDES3Niklas Cassel
Field FL/TPL in register TDES3 is not correctly set on GMAC4. TX appears to be functional on GMAC 4.10a even if this field is not set, however, to avoid relying on undefined behavior, set the length in TDES3. The field has a different meaning depending on if the TSE bit in TDES3 is set or not (TSO). However, regardless of the TSE bit, the field is not optional. The field is already set correctly when the TSE bit is set. Since there is no limit for the number of descriptors that can be used for a single packet, the field should be set to the sum of the buffers contained in: [<desc with First Descriptor bit set> ... <desc n> ... <desc with Last Descriptor bit set>], which should be equal to skb->len. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13cxgb4: save tid while creating server filterGanesh Goudar
Save the filter tid while creating the server filter, which is used later to retrieve the corresponding filter instance while handling the filter reply. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13drivers: net: usb: qmi_wwan: add QMI_QUIRK_SET_DTR for Telit PID 0x1201Daniele Palmas
Telit LE920A4 uses the same pid 0x1201 of LE920, but modem implementation is different, since it requires DTR to be set for answering to qmi messages. This patch replaces QMI_FIXED_INTF with QMI_QUIRK_SET_DTR: tests on LE920 have been performed in order to verify backward compatibility. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13net: mvmdio: allow up to three clocks to be specified for orion-mdioRussell King
Allow up to three clocks to be specified and enabled for the orion-mdio interface, which are required for this interface to be accessible on Armada 8k platforms. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13net: mvmdio: disable interrupt if resource size is too smallRussell King
Disable the MDIO interrupt, falling back to polled mode, if the resource size does not allow us to access the interrupt registers. All current DT bindings use a size of 0x84, which allows access, but verifying it is good practice. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13net: mvmdio: fix interrupt disable in remove pathRussell King
The pre-existing write to disable interrupts on the remove path happens whether we have an interrupt or not. While this may seem to be a good idea, this driver is re-used in many different implementations, some where the binding only specifies four bytes of register space. This access causes us to access registers outside of the binding. Make it conditional on the interrupt being present, which is the same condition used when enabling the interrupt in the first place. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13net: mvmdio: disable interrupts in driver failure pathRussell King
When the mvmdio driver has an interrupt, it enables the "done" interrupt after requesting its interrupt handler. However, probe failure results in the interrupt being left enabled. Disable it on the failure path. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13rt2x00: reverse external PA capability flag logicDaniel Golle
Consequently refer to external PA instead of inverting the logic and use an internal PA capability flag which is a bit confusing. Currently this is used for Rt3352 only, but MT7620A also allows for an external PA which will be supported by a follow up patch. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: avoid LPS/IPS mismatch for pnp notifyYan-Hsuan Chuang
When driver is going to sleep, it does not leave LPS/IPS, thus the BTCoex may have mismatch when driver wakes up. To avoid that, BTCoex needs to clear the IPS/LPS state when it receives a pnp notify, then it can properly set up the hw when driver wakes up. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: do not switch antenna when wifi is under 5G channelYan-Hsuan Chuang
When wifi is on a 5G channel, the 5G signal will not interfere bt 2.4G signal, and they can transmit simultaneously, hence there is no need to switch antenna between wifi and bt. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: monitor bt profiling when scanYan-Hsuan Chuang
When wifi is scanning and not connected, set the tdma and coex table properly to control the priority of the packets to make the wifi bt coexistence operate smoothly Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: consider more cases when bt inquiryYan-Hsuan Chuang
With bt inquiry, the wifi may start as a softap or the wifi and bt are busy, we take these scenarios into consider to avoid bt inquiry to degrade the performance of the network Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: move bt_disabled to global structYan-Hsuan Chuang
Move the bt disable flag to a global structure to indicate that bt is turned off. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: If wifi only, do not initiate coex mechanismYan-Hsuan Chuang
If the device has wifi mode only, there is no need to initiate the hardware for wifi and bt coexistence, so just return to avoid it. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: action when associating/authenticatingYan-Hsuan Chuang
When wifi is associating or authenticating, set the coex table for wifi to establish link. These packets should have higher priority. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: add multi port action for miracast and P2PYan-Hsuan Chuang
To support miracast and P2P, the chip may operate under concurrent mode, In this situation, do not aggregate tx packet and properly set the rx aggregation size. We detect it by monitoring the number of link established. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: set antenna control path for PTAYan-Hsuan Chuang
Set antenna control path if PTA is in control of the packet path of wifi and bt. If wifi is turned off, tell the PTA about it. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: remove setting for 2 antennasYan-Hsuan Chuang
The antenna position setting is useless for 1 antenna chip. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: mask profile bit for connect-ildeYan-Hsuan Chuang
Mask out the connect-idle bit. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: coex table setting for new fwYan-Hsuan Chuang
For newer fw, the coex table setting needs to be modified to operate correctly. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: add function to check wifi statusYan-Hsuan Chuang
This function checks if wifi has changed its statusi. It will be needed in the future. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 21a 1ant: fw settings for softap modeYan-Hsuan Chuang
For ap mode, adjust fw settings to operate properly. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: some hi-prio pkt will cause hid_existYan-Hsuan Chuang
Clear the hid_exist flag by monitoring the packet counter. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-23 00:22:35 +0000