summaryrefslogtreecommitdiff
path: root/drivers/usb/serial
AgeCommit message (Collapse)Author
2017-01-31USB: serial: digi_acceleport: fix OOB data sanity checkJohan Hovold
Make sure to check for short transfers to avoid underflow in a loop condition when parsing the receive buffer. Also fix an off-by-one error in the incomplete sanity check which could lead to invalid data being parsed. Fixes: 8c209e6782ca ("USB: make actual_length in struct urb field u32") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> # v2.6.30 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-31USB: serial: pl2303: add ATEN device IDMarcel J.E. Mol
Seems that ATEN serial-to-usb devices using pl2303 exist with different device ids. This patch adds a missing device ID so it is recognised by the driver. Signed-off-by: Marcel J.E. Mol <marcel@mesa.nl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-31USB: serial: ark3116: use port device for info and error messagesJohan Hovold
Use the port device rather than usb device in info and error messages. This makes sure that driver and tty port is included in the messages, while also making them more uniform. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-31USB: serial: ark3116: remove redundant interrupt-urb checkJohan Hovold
Remove redundant check of num_interrupt_in which has already been verified in probe (killing a NULL-urb would also have been fine). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-31USB: serial: ark3116: fix endpoint-check return valueJohan Hovold
Return -ENODEV rather than -EINVAL on probe errors due to a missing endpoint. Also clean up the endpoint sanity check somewhat and use the interface device for logging a more compact error in case an expected endpoint is missing. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-30Merge tag 'v4.10-rc6' into develLinus Walleij
Linux 4.10-rc6 Resolved conflicts in: drivers/pinctrl/pinctrl-amd.c drivers/pinctrl/samsung/pinctrl-exynos.c
2017-01-26pinctrl / gpio: Introduce .set_config() callback for GPIO chipsMika Westerberg
Currently we already have two pin configuration related callbacks available for GPIO chips .set_single_ended() and .set_debounce(). In future we expect to have even more, which does not scale well if we need to add yet another callback to the GPIO chip structure for each possible configuration parameter. Better solution is to reuse what we already have available in the generic pinconf. To support this, we introduce a new .set_config() callback for GPIO chips. The callback takes a single packed pin configuration value as parameter. This can then be extended easily beyond what is currently supported by just adding new types to the generic pinconf enum. If the GPIO driver is backed up by a pinctrl driver the GPIO driver can just assign gpiochip_generic_config() (introduced in this patch) to .set_config and that will take care configuration requests are directed to the pinctrl driver. We then convert the existing drivers over .set_config() and finally remove the .set_single_ended() and .set_debounce() callbacks. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26USB: serial: add uPD78F0730 USB to Serial Adaptor DriverMaksim Salau
The adaptor can be found on development boards for 78k, RL78 and V850 microcontrollers produced by Renesas Electronics Corporation. This is not a full-featured USB to serial converter, however it allows basic communication and simple control which is enough for programming of on-board flash and debugging through a debug monitor. uPD78F0730 is a USB-enabled microcontroller with USB-to-UART conversion implemented in firmware. This chip is also present in some debugging adaptors which use it for USB-to-SPI conversion as well. The present driver doesn't cover SPI, only USB-to-UART conversion is supported. Signed-off-by: Maksim Salau <maksim.salau@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-26USB: serial: drop unused ASYNC flagsJohan Hovold
Do not report ASYNC_SKIP_TEST or ASYNC_AUTO_IRQ as being set in TIOCGSERIAL handlers as these flags are not supported and do not really make any sense for USB serial devices in the first place. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-26USB: serial: ftdi_sio: clean up ioctl handlerJohan Hovold
Clean up the ioctl handler and make sure to pass an unsigned-int rather than serial_struct pointer to the TIOCSERGETLSR helper as this it what the user argument really is. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-25USB: serial: ftdi_sio: fix extreme low-latency settingJohan Hovold
Since commit 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag") the FTDI driver has been using a receive latency-timer value of 1 ms instead of the device default of 16 ms. The latency timer is used to periodically empty a non-full receive buffer, but a status header is always sent when the timer expires including when the buffer is empty. This means that a two-byte bulk message is received every millisecond also for an otherwise idle port as long as it is open. Let's restore the pre-2009 behaviour which reduces the rate of the status messages to 1/16th (e.g. interrupt frequency drops from 1 kHz to 62.5 Hz) by not setting ASYNC_LOW_LATENCY by default. Anyone willing to pay the price for the minimum-latency behaviour should set the flag explicitly instead using the TIOCSSERIAL ioctl or a tool such as setserial (e.g. setserial /dev/ttyUSB0 low_latency). Note that since commit 0cbd81a9f6ba ("USB: ftdi_sio: remove tty->low_latency") the ASYNC_LOW_LATENCY flag has no other effects but to set a minimal latency timer. Reported-by: Antoine Aubert <a.aubert@overkiz.com> Fixes: 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag") Cc: stable@vger.kernel.org # v2.6.31: e3e574ad85a2 Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-24USB: serial: option: add device ID for HP lt2523 (Novatel E371)Bjørn Mork
Yet another laptop vendor rebranded Novatel E371. Cc: stable@vger.kernel.org Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-19USB: serial: qcserial: add Dell DW5570 QDLAleksander Morgado
The Dell DW5570 is a re-branded Sierra Wireless MC8805 which will by default boot with vid 0x413c and pid 0x81a3. When triggered QDL download mode, the device switches to pid 0x81a6 and provides the standard TTY used for firmware upgrade. Cc: <stable@vger.kernel.org> Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: opticon: fix CTS retrieval at openJohan Hovold
The opticon driver used a control request at open to trigger a CTS status notification to be sent over the bulk-in pipe. When the driver was converted to using the generic read implementation, an inverted test prevented this request from being sent, something which could lead to TIOCMGET reporting an incorrect CTS state. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 7a6ee2b02751 ("USB: opticon: switch to generic read implementation") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: ti_usb_3410_5052: fix control-message error handlingJohan Hovold
Make sure to detect and return an error on zero-length control-message transfers when reading from the device. This addresses a potential failure to detect an empty transmit buffer during close. Also remove a redundant check for short transfer when sending a command. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: ssu100: fix control-message error handlingJohan Hovold
Make sure to detect short control-message transfers rather than continue with zero-initialised data when retrieving modem status and during device initialisation. Fixes: 52af95459939 ("USB: add USB serial ssu100 driver") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: spcp8x5: fix modem-status handlingJohan Hovold
Make sure to detect short control transfers and return zero on success when retrieving the modem status. This fixes the TIOCMGET implementation which since e1ed212d8593 ("USB: spcp8x5: add proper modem-status support") has returned TIOCM_LE on successful retrieval, and avoids leaking bits from the stack on short transfers. This also fixes the carrier-detect implementation which since the above mentioned commit unconditionally has returned true. Fixes: e1ed212d8593 ("USB: spcp8x5: add proper modem-status support") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: quatech2: fix control-message error handlingJohan Hovold
Make sure to detect short control-message transfers when fetching modem and line state in open and when retrieving registers. This specifically makes sure that an errno is returned to user space on errors in TIOCMGET instead of a zero bitmask. Also drop the unused getdevice function which also lacked appropriate error handling. Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: pl2303: fix line-setting error handlingJohan Hovold
Make sure to return an error on zero-length transfers when retrieving the line settings even if the driver currently ignores the return value. Also remove a redundant check for short transfer when setting the line settings. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: mos7840: fix control-message error handlingJohan Hovold
Make sure to detect short transfers when reading a device register. The modem-status handling had sufficient error checks in place, but move handling of short transfers into the register accessor function itself for consistency. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: mos7720: fix control-message error handlingJohan Hovold
Make sure to log an error on short transfers when reading a device register. Also clear the provided buffer (which if often an uninitialised automatic variable) on errors as the driver currently does not bother to check for errors. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: mct_u232: fix modem-status error handlingJohan Hovold
Make sure to detect short control-message transfers so that errors are logged when reading the modem status at open. Note that while this also avoids initialising the modem status using uninitialised heap data, these bits could not leak to user space as they are currently not used. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: iuu_phoenix: remove unused buffer from openJohan Hovold
Remove code that allocated but never used a buffer during open. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: io_edgeport: fix descriptor error handlingJohan Hovold
Make sure to detect short control-message transfers and log an error when reading incomplete manufacturer and boot descriptors. Note that the default all-zero descriptors will now be used after a short transfer is detected instead of partially initialised ones. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: io_edgeport: fix epic-descriptor handlingJohan Hovold
Use a dedicated buffer for the DMA transfer and make sure to detect short transfers to avoid parsing a corrupt descriptor. Fixes: 6e8cf7751f9f ("USB: add EPIC support to the io_edgeport driver") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: ftdi_sio: fix latency-timer error handlingJohan Hovold
Make sure to detect short responses when reading the latency timer to avoid using stale buffer data. Note that no heap data would currently leak through sysfs as ASYNC_LOW_LATENCY is set by default. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: ftdi_sio: fix modem-status error handlingJohan Hovold
Make sure to detect short responses when fetching the modem status in order to avoid parsing uninitialised buffer data and having bits of it leak to user space. Note that we still allow for short 1-byte responses. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: ark3116: fix open error handlingJohan Hovold
Fix open error handling which failed to detect errors when reading the MSR and LSR registers, something which could lead to the shadow registers being initialised from errnos. Note that calling the generic close implementation is sufficient in the error paths as the interrupt urb has not yet been submitted and the register updates have not been made. Fixes: f4c1e8d597d1 ("USB: ark3116: Make existing functions 16450-aware and add close and release functions.") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: ark3116: fix register-accessor error handlingJohan Hovold
The current implementation failed to detect short transfers, something which could lead to bits of the uninitialised heap transfer buffer leaking to user space. Fixes: 149fc791a452 ("USB: ark3116: Setup some basic infrastructure for new ark3116 driver.") Fixes: f4c1e8d597d1 ("USB: ark3116: Make existing functions 16450-aware and add close and release functions.") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: kl5kusb105: remove unused termios structureJohan Hovold
Remove unused termios structure from private data that was left by an earlier purge by commit b1cff285ae8d ("usb serial: Eliminate bogus ioctl code"). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: kl5kusb105: clean up struct definitionJohan Hovold
Drop redundant packed attribute from the port-settings struct which is already 1-byte aligned. Also replace __u8 with u8 for the field types as this is not a structure we share with user space. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: kl5kusb105: remove dead codeJohan Hovold
Remove dead and broken code that only served as a reminder to one day implement modem control. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: kl5kusb105: make logging less verboseJohan Hovold
Replace a couple of dev_info with dev_dbg and remove another. Also use the port device for logging, and include a radix prefix when logging the baudrate. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: ch341: change initial line-control settingsJohan Hovold
Some CH340 devices appear unable to change the initial LCR settings, so set a sane 8N1 default during probe to enable basic support for such devices. Also drop a redundant LCR read during device initialisation. Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: ch341: rename LCR variable in set_termiosJohan Hovold
Rename the line-control-register variable in set_termios to "lcr" and use u8 type to match the shadow register. Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: ch341: rename modem-status registerJohan Hovold
Rename the shadow modem-status register currently named "line_status" to the less confusing "msr". Also rename the helper function used to parse the interrupt data. Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: ch341: rename shadow modem-control registerJohan Hovold
Rename the shadow modem-control register currently named "line_control" to the less confusing "mcr". Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: ch341: clean up control debug messagesJohan Hovold
Clean up the control-transfer debug messages by dropping redundant information and unnecessary casts. Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: ch341: fix modem-status handlingJohan Hovold
The modem-status register was read as part of device configuration at port_probe and then again at open (and reset-resume). During open (and reset-resume) the MSR was read before submitting the interrupt URB, something which could lead to an MSR-change going unnoticed when it races with open (reset-resume). Fix this by dropping the redundant reconfiguration of the port at every open, and only read the MSR after the interrupt URB has been submitted. Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-16USB: serial: cypress_m8: remove unused variableSudip Mukherjee
The variable havedata was only being set but never used afterwards. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-11USB: serial: ch341: fix control-message error handlingJohan Hovold
A short control transfer would currently fail to be detected, something which could lead to stale buffer data being used as valid input. Check for short transfers, and make sure to log any transfer errors. Note that this also avoids leaking heap data to user space (TIOCMGET) and the remote device (break control). Fixes: 6ce76104781a ("USB: Driver for CH341 USB-serial adaptor") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-10USB: serial: kl5kusb105: fix line-state error handlingJohan Hovold
The current implementation failed to detect short transfers when attempting to read the line state, and also, to make things worse, logged the content of the uninitialised heap transfer buffer. Fixes: abf492e7b3ae ("USB: kl5kusb105: fix DMA buffers on stack") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-09USB: serial: ch341: fix baud rate and line-control handlingJohan Hovold
Revert to using direct register writes to set the divisor and line-control registers. A recent change switched to using the init vendor command to update these registers, something which also enabled support for CH341A devices. It turns out that simply setting bit 7 in the divisor register is sufficient to support CH341A and specifically prevent data from being buffered until a full endpoint-size packet (32 bytes) has been received. Using the init command also had the side-effect of temporarily deasserting the DTR/RTS signals on every termios change (including initialisation on open) something which for example could cause problems in setups where DTR is used to trigger a reset. Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-09USB: serial: ch341: fix line settings after reset-resumeJohan Hovold
A recent change added support for modifying the default line-control settings, but did not make sure that the modified settings were used as part of reconfiguration after a device has been reset during resume. This caused a port that was open before suspend to be unusable until being closed and reopened. Fixes: ba781bdf8662 ("USB: serial: ch341: add support for parity, frame length, stop bits") Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-09USB: serial: ch341: fix resume after resetJohan Hovold
Fix reset-resume handling which failed to resubmit the read and interrupt URBs, thereby leaving a port that was open before suspend in a broken state until closed and reopened. Fixes: 1ded7ea47b88 ("USB: ch341 serial: fix port number changed after resume") Fixes: 2bfd1c96a9fb ("USB: serial: ch341: remove reset_resume callback") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-09USB: serial: ch341: fix open error handlingJohan Hovold
Make sure to stop the interrupt URB before returning on errors during open. Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-09USB: serial: ch341: fix modem-control and B0 handlingJohan Hovold
The modem-control signals are managed by the tty-layer during open and should not be asserted prematurely when set_termios is called from driver open. Also make sure that the signals are asserted only when changing speed from B0. Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-09USB: serial: ch341: fix open and resume after B0Johan Hovold
The private baud_rate variable is used to configure the port at open and reset-resume and must never be set to (and left at) zero or reset-resume and all further open attempts will fail. Fixes: aa91def41a7b ("USB: ch341: set tty baud speed according to tty struct") Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-09USB: serial: ch341: fix initial modem-control stateJohan Hovold
DTR and RTS will be asserted by the tty-layer when the port is opened and deasserted on close (if HUPCL is set). Make sure the initial state is not-asserted before the port is first opened as well. Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-04USB: serial: ti_usb_3410_5052: fix NULL-deref at openJohan Hovold
Fix NULL-pointer dereference in open() should a malicious device lack the expected endpoints: Unable to handle kernel NULL pointer dereference at virtual address 00000030 .. [<bf06a6b0>] (ti_open [ti_usb_3410_5052]) from [<bf02e118>] (serial_port_activate+0x68/0x98 [usbserial]) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>