summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-08-02cxgb4: advertise NETIF_F_TSO_ECNDimitris Michailidis
The device supports TSO+ECN. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02cxgb4: get on-chip queue info from FW and create a memory window for themDimitris Michailidis
Get info about the availability of Tx on-chip queues from FW and if they are supported set up a memory window for them. iw_cxgb4 will be using them. Move the existing window setup later in the init sequence, after we have collected the new info. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02cxgb4: fix TSO descriptorsDimitris Michailidis
Commit 1704d74894912b8ecc3e95cecd7bde336a0b1bf2 ("cxgb4vf: small changes to message processing structures/macros") was incomplete and causes cxgb4 to write bad TSO descriptors. Fix that up by reverting the offending part of that commit and adjusting field accesses now that they are one level deeper. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02cxgb4: don't offload Rx checksums for IPv6 fragmentsDimitris Michailidis
The checksum provided by the device doesn't include the L3 headers, as IPv6 expects. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02cxgb4: disable an interrupt that is neither used nor servicedDimitris Michailidis
Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02hp100: unmap memory on error pathDan Carpenter
There was an error path where "mem_ptr_virt" didn't get unmapped. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02Tulip: don't initialize SBE xT3E3 WAN ports.Krzysztof Hałasa
SBE 2T3E3 cards use DECchips 21143 but they need a different driver. Don't even try to use a normal tulip driver with them. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02drivers/net/wan/farsync.c: Use standard pr_<level>Joe Perches
Remove locally defined equivalents Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02Merge branch 'vhost-net-next' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2010-08-02tg3: Update version to 3.113Matt Carlson
This patch updates the tg3 version to 3.113. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02tg3: Migrate tg3_flags to phy_flagsMatt Carlson
This patch moves most of the phy related flag definitions over to the phyflags member and changes the code accordingly. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02tg3: Create phy_flags and migrate phy_is_low_powerMatt Carlson
This patch deletes the link_config.phy_is_low_power flag and creates a new phy_flags device member to store all phy related settings. All the code is converted accordingly. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02tg3: Add phy-related preprocessor constantsMatt Carlson
This patch replaces some instances of hardcoded phy register values with preprocessor equivalents. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02tg3: Add error reporting to tg3_phydsp_write()Matt Carlson
This patch adds error reporting to the tg3_phydsp_write() function and converts a few more locations to use this function over the inlined equivalent. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02tg3: Improve small packet performanceMatt Carlson
smp_mb() inside tg3_tx_avail() is used twice in the normal tg3_start_xmit() path (see illustration below). The full memory barrier is only necessary during race conditions with tx completion. We can speed up the tx path by replacing smp_mb() in tg3_tx_avail() with a compiler barrier. The compiler barrier is to force the compiler to fetch the tx_prod and tx_cons from memory. In the race condition between tg3_start_xmit() and tg3_tx(), we have the following situation: tg3_start_xmit() tg3_tx() if (!tg3_tx_avail()) BUG(); ... if (!tg3_tx_avail()) netif_tx_stop_queue(); update_tx_index(); smp_mb(); smp_mb(); if (tg3_tx_avail()) if (netif_tx_queue_stopped() && netif_tx_wake_queue(); tg3_tx_avail()) With smp_mb() removed from tg3_tx_avail(), we need to add smp_mb() to tg3_start_xmit() as shown above to properly order netif_tx_stop_queue() and tg3_tx_avail() to check the ring index. If it is not strictly ordered, the tx queue can be stopped forever. This improves performance by about 3% with 2 ports running bi-directional 64-byte packets. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02tg3: Remove 5720, 5750, and 5750MMatt Carlson
These devices were never released to the public. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02tg3: Detect APE firmware typesMatt Carlson
This patch adds code to determine the APE firmware type and report this along with the firmware version. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02tg3: Restrict ASPM workaround devlistMatt Carlson
The ASPM workaround setting obtained from NVRAM only works with devices older than 5717. This patch enforces the restriction. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02tg3: Manage gphy power for CPMU-less devs onlyMatt Carlson
This patch changes the code to only manage the PCIe gphy power for CPMU-less devices only. The CPMU takes over management for newer chips. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02tg3: Don't access phy test ctrl reg for 5717+Matt Carlson
The phy test register location has been repurposed for 5717+ devices. This patch changes the code to avoid this location for these devices. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02tg3: Create TG3_FLG3_5717_PLUS flagMatt Carlson
This patch creates a TG3_FLG3_5717_PLUS flag to collectively describe the set of changes in the ASIC that will apply to all future chip revisions. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02tg3: Disable TSS also during tg3_close()Matt Carlson
The TSS flag needs to be turned off during tg3_close(). If the device fails to allocate more than one MSI-X vector the next time the device is brought up, transmits will fail. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02tg3: Add 5784 ASIC rev to earlier PCIe MPS fixMatt Carlson
tg3 commit e7126997342560533317d8467e8516119ebcbd21 entitled "tg3: Preserve PCIe MPS setting for new devs" attempted to ensure the PCIe link negotiated Maximum Payload Size (MPS) setting was 128 bytes for all devices that didn't support higher speeds. The 5784 device was mistakenly added to this list when it shouldn't have. This patch removes the 5784 ASIC rev devices from that list. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02V4L/DVB: sms: Convert IR support to use the Remote Controller coreMauro Carvalho Chehab
Rewrites the siano IR implementation. The previous implementation were non-standard. As such, it has issues if more than one device registers IR, as there used to have some static constants used during protocol decoding phase. Also, it used to implement its on RAW decoder, and only for RC5. The new code uses RC core subsystem for handling IR. This brings several new features to the driver, including: - Allow to dynamically replace the IR keycodes; - Supports all existing raw decoders (JVC, NEC, RC-5, RC-6, SONY); - Supports lirc dev; - Doesn't have race conditions when more than one sms IR is registered; - The code size for the IR implementation is very small; - it exports the IR features via /sys/class/rc. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: sms: properly initialize IR phys and IR nameMauro Carvalho Chehab
sms were using a non-compliant nomenclature for the USB devices. Fix it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: standardize names at rc-dib0700 tablesMauro Carvalho Chehab
Use a more standard way to name those tables, as they're currently used by the script that coverts those tables to be loaded via userspace. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: smsusb: enable IR port for Hauppauge WinTV MiniStickMauro Carvalho Chehab
Add the proper gpio port for WinTV MiniStick, with the information provided by Michael. Thanks-to: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: dib0700: Fix RC protocol logic to properly handle NEC/NECx and RC-5Mauro Carvalho Chehab
Simplifies the logic for handling firmware 1.20 RC messages, fixing the logic. While here, I tried to use a RC-6 remote controller from my TV set, but it didn't work with dib0700. Not sure why, but maybe this never worked. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: dib0700: properly implement IR change_protocolMauro Carvalho Chehab
This patch implements change_protocol callback. With this change, there's no need for an extra modprobe parameter to specify the protocol. When a table is loaded (either from in-kernel rc-map tables or via ir-keytable program), the driver will automatically change the protocol, in order to work with the given table. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: dib0700: break keytable into NEC and RC-5 variantsMauro Carvalho Chehab
Instead of having one big keytable with 2 protocols inside, break it into two separate tables, being one for NEC and another for RC-5 variants, and properly identify what variant should be used at the boards entries. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: dib0700: avoid bad repeatMauro Carvalho Chehab
a 250ms delay is too low for this device. It ends by producing false repeat events. Increase the delay time to 500 ms to avoid troubles. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: Port dib0700 to rc-coreMauro Carvalho Chehab
Use the new rc-core handler at dvb-usb-remote for dib0700 driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: Add a keymap file with dib0700 tableMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: dvb-usb: add support for rc-core modeMauro Carvalho Chehab
Allows dvb-usb drivers to use rc-core, instead of the legacy implementation. No driver were ported yet to rc-core, so, some small adjustments may be needed, when starting to migrate the drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: dvb-usb: prepare drivers for using rc-coreMauro Carvalho Chehab
This is a big patch, yet trivial. It just move the RC properties to a separate struct, in order to prepare the dvb-usb drivers to use rc-core. There's no change on the behavior of the drivers. With this change, it is possible to have both legacy and rc-core based code inside the dvb-usb-remote, allowing a gradual migration to rc-core, driver per driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: dvb-usb: get rid of struct dvb_usb_rc_keyMauro Carvalho Chehab
dvb-usb has its own IR handle code. Now that we have a Remote Controller subsystem, we should start using it. So, remove this struct, in favor of the similar struct defined at the RC subsystem. This is a big, but trivial patch. It is a 3 line delect, plus lots of rename on several dvb-usb files. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: rj54n1cb0c: fix a comment in the driverGuennadi Liakhovetski
RJ54N1CB0C is a Sharp camera sensor. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: V4L2: sh_vou: VOU does support the full PAL resolution tooGuennadi Liakhovetski
SH7724 datasheet specifies 480 pixels as the VOU maximum vertical resolution. This is a bug in the datasheet, VOU also supports the full PAL resolution: 576 lines. Adjust the driver accordingly. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: V4L2: sh_mobile_camera_ceu: add support for CSI2Guennadi Liakhovetski
Using CEU with CSI2 on SH-Mobile requires some special configuration of the former. We also have to switch from calling only one subdev .s_mbus_fmt and .try_mbus_fmt to calling all subdevices. Take care to increment CSI2 driver use count to prevent it from unloading, while in use. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: V4L2: soc-camera: add a MIPI CSI-2 driver for SH-Mobile platformsGuennadi Liakhovetski
Some SH-Mobile SoCs implement a MIPI CSI-2 controller, that can interface to several video clients and send data to the CEU or to the Image Signal Processor. This patch implements a v4l2-subdevice driver for CSI-2 to be used within the soc-camera framework, implementing the second subdevice in addition to the actual video clients. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: V4L2: soc-camera: export soc-camera bus type for notificationsGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: mediabus: fix ambiguous pixel code namesGuennadi Liakhovetski
Endianness notation is meaningless for 8 bit YUYV codes. Switch pixel code names to explicitly state the order of colour components in the data stream. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: staging/lirc: CodingStyle cleanupsMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: staging/lirc: wire up Kconfig and Makefile bitsJarod Wilson
Make the bits under staging/lirc/ buildable, and add a TODO note. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: staging/lirc: add lirc_zilog driverJarod Wilson
Commonly found on several Hauppauge video capture devices. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: staging/lirc: add lirc_ttusbir driverJarod Wilson
Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: staging/lirc: add lirc_streamzap driverJarod Wilson
Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: staging/lirc: add lirc_sir driverJarod Wilson
Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: staging/lirc: add lirc_serial driverJarod Wilson
Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: staging/lirc: add lirc_sasem driverJarod Wilson
Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-30 04:21:47 +0000