summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-05-09qede: Fix XDP memory leak on unloadSuddarsana Reddy Kalluru
When (re|un)loading, Tx-queues belonging to XDP would not get freed. Fixes: cb6aeb079294 ("qede: Add support for XDP_TX") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-09net/mlx4_core: Reduce harmless SRIOV error message to debug levelJack Morgenstein
Under SRIOV resource management, extra counters are allocated to VFs from a free pool. If that pool is empty, the ALLOC_RES command for a counter resource fails -- and this generates a misleading error message in the message log. Under SRIOV, each VF is allocated (i.e., guaranteed) 2 counters -- one counter per port. For ETH ports, the RoCE driver requests an additional counter (above the guaranteed counters). If that request fails, the VF RoCE driver simply uses the default (i.e., guaranteed) counter for that port. Thus, failing to allocate an additional counter does not constitute a problem, and the error message on the PF when this occurs should be reduced to debug level. Finally, to identify the situation that the reason for the failure is that no resources are available to grant to the VF, we modified the error returned by mlx4_grant_resource to -EDQUOT (Quota exceeded), which more accurately describes the error. Fixes: c3abb51bdb0e ("IB/mlx4: Add RoCE/IB dedicated counters") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-09net/mlx4_en: Avoid adding steering rules with invalid ringTalat Batheesh
Inserting steering rules with illegal ring is an invalid operation, block it. Fixes: 820672812f82 ('net/mlx4_en: Manage flow steering rules with ethtool') Signed-off-by: Talat Batheesh <talatb@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-09net/mlx4_en: Change the error print to debug printKamal Heib
The error print within mlx4_en_calc_rx_buf() should be a debug print. Fixes: 51151a16a60f ('mlx4: allow order-0 memory allocations in RX path') Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-09virtio_net: tidy a couple debug statementsDan Carpenter
We are printing a decimal value for truesize so we shouldn't use an "0x" prefix. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-05-09virtio_net: don't reset twice on XDP on/offMichael S. Tsirkin
We already do a reset once in remove_vq_common - there appears to be no point in doing another one when we add/remove XDP. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-05-09virtio_net: fix support for small ringsMichael S. Tsirkin
When ring size is small (<32 entries) making buffers smaller means a full ring might not be able to hold enough buffers to fit a single large packet. Make sure a ring full of buffers is large enough to allow at least one packet of max size. Fixes: 2613af0ed18a ("virtio_net: migrate mergeable rx buffers to page frag allocators") Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-05-09virtio_net: reduce alignment for buffersMichael S. Tsirkin
We don't need to align length to any particular value anymore. Aligning to L1 cache size probably sill makes sense to reduce false sharing. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-05-09virtio_net: rework mergeable buffer handlingMichael S. Tsirkin
Use the new _ctx virtio API to maintain true length for each buffer. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-05-09virtio_net: allow specifying context for rxMichael S. Tsirkin
With mergeable buffers we never use s/g for rx, so allow specifying context in that case. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-05-09drivers: net: wimax: i2400m: i2400m-usb: Use time_after for time comparisonKarim Eshapa
Use time_after() for time comparison with the new fix. Signed-off-by: Karim Eshapa <karim.eshapa@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-09of/fdt: introduce of_scan_flat_dt_subnodes and of_get_flat_dt_phandleNicholas Piggin
Introduce primitives for FDT parsing. These will be used for powerpc cpufeatures node scanning, which has quite complex structure but should be processed early. Cc: devicetree@vger.kernel.org Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-09Merge branch 'next' of ↵Michael Ellerman
git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux into next Freescale updates from Scott: "Includes a fix for a powerpc/next mm regression on 64e, a fix for a kernel hang on 64e when using a debugger inside a relocated kernel, a qman fix, and misc qe improvements."
2017-05-09s390/qdio: increase string buffer sizeHeiko Carstens
Avoid false positive warnings like this with gcc 7.1: drivers/s390/cio/qdio_debug.h:63:4: note: 'snprintf' output between 8 and 17 bytes into a destination of size 16 snprintf(debug_buffer, QDIO_DBF_LEN, text); and simply increase the size of the string buffer. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-05-09s390/ccwgroup: increase string buffer sizeHeiko Carstens
Avoid false positive warnings like this with gcc 7.1: drivers/s390/cio/ccwgroup.c:41:21: warning: '%d' directive writing between 1 and 10 bytes into a region of size 4 sprintf(str, "cdev%d", i); and simply increase the size of the string buffer. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-05-09clocksource/arm_arch_timer: Fix arch_timer_mem_find_best_frame()Sudeep Holla
arch_timer_mem_find_best_frame() looks through ARCH_TIMER_MEM_MAX_FRAMES frames even after finding matches to ensure the best frame is chosen, which means the variable frame will point to the last valid frame but not necessarily the best frame. On Juno, we get the following error as the wrong frame is returned as the best frame from arch_timer_mem_find_best_frame(): arch_timer: Unable to map frame @ 0x0000000000000000 arch_timer: Frame missing phys irq. Failed to initialize '/timer@2a810000': -22 Fix the issue by correctly returning the best frame from arch_timer_mem_find_best_frame(). Fixes: c389d701dfb7 ("clocksource: arm_arch_timer: split MMIO timer probing.") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1494246747-17267-1-git-send-email-sudeep.holla@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-05-08md/md0: optimize raid0 discard handlingShaohua Li
There are complaints that raid0 discard handling is slow. Currently we divide discard request into chunks and dispatch to underlayer disks. The block layer will do merge to form big requests. This causes a lot of request split/merge and uses significant CPU time. A simple idea is to calculate the range for each raid disk for an IO request and send a discard request to raid disks, which will avoid the split/merge completely. Previously Coly tried the approach, but the implementation was too complex because of raid0 zones. This patch always split bio in zone boundary and handle bio within one zone. It simplifies the implementation a lot. Reviewed-by: NeilBrown <neilb@suse.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Shaohua Li <shli@fb.com>
2017-05-08Merge tags 'for-linus' and 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull more rdma updates from Doug Ledford: "As mentioned in my first pull request, this is the subsequent pull requests I had. This is all I have, and in fact this cleans out the RDMA subsystem's entire patchworks queue of kernel changes that are ready to go (well, it did for the weekend anyway, a few new patches are in, but they'll be coming during the -rc cycle). The first tag contains a single patch that would have conflicted if taken from my tree or DaveM's tree as it needed our trees merged to come cleanly. The second tag contains the patch series from Intel plus three other stragllers that came in late last week. I took them because it allowed me to legitimately claim that the RDMA patchworks queue was, for a short time, 100% cleared of all waiting kernel patches, woohoo! :-). I have it under my for-next tag, so it did get 0day and linux- next over the end of last week, and linux-next did show one minor conflict. Summary: 'for-linus' tag: - mlx5/IPoIB fixup patch 'for-next' tag: - the hfi1 15 patch set that landed late - IPoIB get_link_ksettings which landed late because I asked for a respin - one late rxe change - one -rc worthy fix that's in early" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/mlx5: Enable IPoIB acceleration * tag 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: rxe: expose num_possible_cpus() cnum_comp_vectors IB/rxe: Update caller's CRC for RXE_MEM_TYPE_DMA memory type IB/hfi1: Clean up on context initialization failure IB/hfi1: Fix an assign/ordering issue with shared context IDs IB/hfi1: Clean up context initialization IB/hfi1: Correctly clear the pkey IB/hfi1: Search shared contexts on the opened device, not all devices IB/hfi1: Remove atomic operations for SDMA_REQ_HAVE_AHG bit IB/hfi1: Use filedata rather than filepointer IB/hfi1: Name function prototype parameters IB/hfi1: Fix a subcontext memory leak IB/hfi1: Return an error on memory allocation failure IB/hfi1: Adjust default eager_buffer_size to 8MB IB/hfi1: Get rid of divide when setting the tx request header IB/hfi1: Fix yield logic in send engine IB/hfi1, IB/rdmavt: Move r_adefered to r_lock cache line IB/hfi1: Fix checks for Offline transient state IB/ipoib: add get_link_ksettings in ethtool
2017-05-08scsi: pmcraid: remove redundant check to see if request_size is less than zeroColin Ian King
The 2nd check to see if request_size is less than zero is redundant because the first check takes error exit path on this condition. So, since it is redundant, remove it. Detected by CoverityScan, CID#146149 ("Logically Dead Code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-08scsi: lpfc: ensure els_wq is being checked before destroying itColin Ian King
I believe there is a typo on the wq destroy of els_wq, currently the driver is checking if els_cq is not null and I think this should be a check on els_wq instead. Detected by CoverityScan, CID#1411629 ("Copy-paste error") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-08scsi: cxlflash: Select IRQ_POLLGuenter Roeck
The driver now uses IRQ_POLL and needs to select it to avoid the following build error. ERROR: ".irq_poll_complete" [drivers/scsi/cxlflash/cxlflash.ko] undefined! ERROR: ".irq_poll_sched" [drivers/scsi/cxlflash/cxlflash.ko] undefined! ERROR: ".irq_poll_disable" [drivers/scsi/cxlflash/cxlflash.ko] undefined! ERROR: ".irq_poll_init" [drivers/scsi/cxlflash/cxlflash.ko] undefined! Fixes: cba06e6de403 ("scsi: cxlflash: Implement IRQ polling for RRQ processing") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-08scsi: qedf: Avoid reading past end of bufferKees Cook
Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, use strncpy() which will fill the trailing bytes with zeros. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <danielmicay@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-08Merge tag 'pci-v4.12-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add framework for supporting PCIe devices in Endpoint mode (Kishon Vijay Abraham I) - use non-postable PCI config space mappings when possible (Lorenzo Pieralisi) - clean up and unify mmap of PCI BARs (David Woodhouse) - export and unify Function Level Reset support (Christoph Hellwig) - avoid FLR for Intel 82579 NICs (Sasha Neftin) - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig) - short-circuit config access failures for disconnected devices (Keith Busch) - remove D3 sleep delay when possible (Adrian Hunter) - freeze PME scan before suspending devices (Lukas Wunner) - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava) - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann) - add arch-specific alignment control to improve device passthrough by avoiding multiple BARs in a page (Yongji Xie) - add sysfs sriov_drivers_autoprobe to control VF driver binding (Bodong Wang) - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas) - fix crashes when unbinding host controllers that don't support removal (Brian Norris) - add driver for MicroSemi Switchtec management interface (Logan Gunthorpe) - add driver for Faraday Technology FTPCI100 host bridge (Linus Walleij) - add i.MX7D support (Andrey Smirnov) - use generic MSI support for Aardvark (Thomas Petazzoni) - make Rockchip driver modular (Brian Norris) - advertise 128-byte Read Completion Boundary support for Rockchip (Shawn Lin) - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin) - convert atomic_t to refcount_t in HV driver (Elena Reshetova) - add CPU IRQ affinity in HV driver (K. Y. Srinivasan) - fix PCI bus removal in HV driver (Long Li) - add support for ThunderX2 DMA alias topology (Jayachandran C) - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki) - add ITE 8893 bridge DMA alias quirk (Jarod Wilson) - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices (Manish Jaggi) * tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits) PCI: Don't allow unbinding host controllers that aren't prepared ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP MAINTAINERS: Add PCI Endpoint maintainer Documentation: PCI: Add userguide for PCI endpoint test function tools: PCI: Add sample test script to invoke pcitest tools: PCI: Add a userspace tool to test PCI endpoint Documentation: misc-devices: Add Documentation for pci-endpoint-test driver misc: Add host side PCI driver for PCI test function device PCI: Add device IDs for DRA74x and DRA72x dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access PCI: dwc: dra7xx: Workaround for errata id i870 dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode PCI: dwc: dra7xx: Add EP mode support PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently dt-bindings: PCI: Add DT bindings for PCI designware EP mode PCI: dwc: designware: Add EP mode support Documentation: PCI: Add binding documentation for pci-test endpoint function ixgbe: Use pcie_flr() instead of duplicating it IB/hfi1: Use pcie_flr() instead of duplicating it PCI: imx6: Fix spelling mistake: "contol" -> "control" ...
2017-05-08scsi: qedf: Cleanup the type of io_log->opDan Carpenter
We store sc_cmd->cmnd[0] which is an unsigned char in io_log->op so this should also be unsigned char. The other thing is that this is displayed in the debugfs: seq_printf(s, "0x%02x:", io_log->op); Smatch complains that the formatting won't work for negative values so changing it to unsigned silences that warning as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-08scsi: lpfc: double lock typo in lpfc_ns_rsp()Dan Carpenter
There is a double lock bug here so this will deadlock instead of unlocking. Fixes: 1c5b12f76301 ("Fix implicit logo and RSCN handling for NVMET") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-08Merge tag 'tty-4.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the "big" TTY/Serial patch updates for 4.12-rc1 Not a lot of new things here, the normal number of serial driver updates and additions, tiny bugs fixed, and some core files split up to make future changes a bit easier for Nicolas's "tiny-tty" work. All of these have been in linux-next for a while" * tag 'tty-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (62 commits) serial: small Makefile reordering tty: split job control support into a file of its own tty: move baudrate handling code to a file of its own console: move console_init() out of tty_io.c serial: 8250_early: Add earlycon support for Palmchip UART tty: pl011: use "qdf2400_e44" as the earlycon name for QDF2400 E44 vt: make mouse selection of non-ASCII consistent vt: set mouse selection word-chars to gpm's default imx-serial: Reduce RX DMA startup latency when opening for reading serial: omap: suspend device on probe errors serial: omap: fix runtime-pm handling on unbind tty: serial: omap: add UPF_BOOT_AUTOCONF flag for DT init serial: samsung: Remove useless spinlock serial: samsung: Add missing checks for dma_map_single failure serial: samsung: Use right device for DMA-mapping calls serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off tty: fix comment typo s/repsonsible/responsible/ tty: amba-pl011: Fix spurious TX interrupts serial: xuartps: Enable clocks in the pm disable case also serial: core: Re-use struct uart_port {name} field ...
2017-05-08scsi: qedf: properly update arguments position in function callGustavo A. R. Silva
Properly update the position of the arguments in function call. Addresses-Coverity-ID: 1402010 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-08scsi: scsi_lib: Add #include <scsi/scsi_transport.h>Bart Van Assche
This patch avoids that when building with W=1 the compiler complains that __scsi_init_queue() has not been declared. See also commit d48777a633d6 ("scsi: remove __scsi_alloc_queue"). Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-08scsi: Skip deleted devices in __scsi_device_lookupZhou Zhengping
When a device is unplugged from a SCSI controller, if the scsi_device is still in use by application layer, it won't get released until users close it. In this case, scsi_device_remove just set the scsi_device's state to be SDEV_DEL. But if you plug the disk just before the old scsi_device is released, then there will be two scsi_device structures in scsi_host->__devices. When the next unplug event happens, some low-level drivers will check whether the scsi_device has been added to host (for example the MegaRAID SAS series controller) by calling scsi_device_lookup(call __scsi_device_lookup) in function megasas_aen_polling. __scsi_device_lookup will return the first scsi_device. Because its state is SDEV_DEL, the scsi_device_lookup will return NULL, making the low-level driver assume that the scsi_device has been removed, and won't call scsi_device_remove which will lead to hot swap failure. Signed-off-by: Zhou Zhengping <johnzzpcrystal@gmail.com> Tested-by: Zeng Rujia <ZengRujia@sangfor.com.cn> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195607 Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-08scsi: lpfc: Fix panic on BFS configurationJames Smart
To select the appropriate shost template, the driver is issuing a mailbox command to retrieve the wwn. Turns out the sending of the command precedes the reset of the function. On SLI-4 adapters, this is inconsequential as the mailbox command location is specified by dma via the BMBX register. However, on SLI-3 adapters, the location of the mailbox command submission area changes. When the function is first powered on or reset, the cmd is submitted via PCI bar memory. Later the driver changes the function config to use host memory and DMA. The request to start a mailbox command is the same, a simple doorbell write, regardless of submission area. So.. if there has not been a boot driver run against the adapter, the mailbox command works as defaults are ok. But, if the boot driver has configured the card and, and if no platform pci function/slot reset occurs as the os starts, the mailbox command will fail. The SLI-3 device will use the stale boot driver dma location. This can cause PCI eeh errors. Fix is to reset the sli-3 function before sending the mailbox command, thus synchronizing the function/driver on mailbox location. Note: The fix uses routines that are typically invoked later in the call flow to reset the sli-3 device. The issue in using those routines is that the normal (non-fix) flow does additional initialization, namely the allocation of the pport structure. So, rather than significantly reworking the initialization flow so that the pport is alloc'd first, pointer checks are added to work around it. Checks are limited to the routines invoked by a sli-3 adapter (s3 routines) as this fix/early call is only invoked on a sli3 adapter. Nothing changes post the fix. Subsequent initialization, and another adapter reset, still occur - both on sli-3 and sli-4 adapters. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Fixes: 96418b5e2c88 ("scsi: lpfc: Fix eh_deadline setting for sli3 adapters.") Cc: stable@vger.kernel.org # v4.11+ Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-08scsi: libfc: do not flood console with messages 'libfc: queue full ...'Hannes Reinecke
When the FCoE sending side becomes congested libfc tries to reduce the queue depth on the host; however due to the built-in lag before attempting to ramp down the queue depth _again_ the message log is flooded with the following message: libfc: queue full, reducing can_queue to 512 With this patch the message is printed only once (ie when it's actually changed). Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Acked-by: Johannes Thumshirn <jth@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-08Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: - the rest of MM - various misc things - procfs updates - lib/ updates - checkpatch updates - kdump/kexec updates - add kvmalloc helpers, use them - time helper updates for Y2038 issues. We're almost ready to remove current_fs_time() but that awaits a btrfs merge. - add tracepoints to DAX * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits) drivers/staging/ccree/ssi_hash.c: fix build with gcc-4.4.4 selftests/vm: add a test for virtual address range mapping dax: add tracepoint to dax_insert_mapping() dax: add tracepoint to dax_writeback_one() dax: add tracepoints to dax_writeback_mapping_range() dax: add tracepoints to dax_load_hole() dax: add tracepoints to dax_pfn_mkwrite() dax: add tracepoints to dax_iomap_pte_fault() mtd: nand: nandsim: convert to memalloc_noreclaim_*() treewide: convert PF_MEMALLOC manipulations to new helpers mm: introduce memalloc_noreclaim_{save,restore} mm: prevent potential recursive reclaim due to clearing PF_MEMALLOC mm/huge_memory.c: deposit a pgtable for DAX PMD faults when required mm/huge_memory.c: use zap_deposited_table() more time: delete CURRENT_TIME_SEC and CURRENT_TIME gfs2: replace CURRENT_TIME with current_time apparmorfs: replace CURRENT_TIME with current_time() lustre: replace CURRENT_TIME macro fs: ubifs: replace CURRENT_TIME_SEC with current_time fs: ufs: use ktime_get_real_ts64() for birthtime ...
2017-05-08drivers/staging/ccree/ssi_hash.c: fix build with gcc-4.4.4Andrew Morton
drivers/staging/ccree/ssi_hash.c:1990: error: unknown field 'template_ahash' specified in initializer drivers/staging/ccree/ssi_hash.c:1991: error: unknown field 'init' specified in initializer drivers/staging/ccree/ssi_hash.c:1991: warning: missing braces around initializer drivers/staging/ccree/ssi_hash.c:1991: warning: (near initialization for 'driver_hash[0].<anonymous>.template_ahash') drivers/staging/ccree/ssi_hash.c:1992: error: unknown field 'update' specified in initializer drivers/staging/ccree/ssi_hash.c:1992: warning: excess elements in union initializer drivers/staging/ccree/ssi_hash.c:1992: warning: (near initialization for 'driver_hash[0].<anonymous>') drivers/staging/ccree/ssi_hash.c:1993: error: unknown field 'final' specified in initializer drivers/staging/ccree/ssi_hash.c:1993: warning: excess elements in union initializer drivers/staging/ccree/ssi_hash.c:1993: warning: (near initialization for 'driver_hash[0].<anonymous>') ... gcc-4.4.4 has issues with anon union initializers. Work around this. Cc: Gilad Ben-Yossef <gilad@benyossef.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08mtd: nand: nandsim: convert to memalloc_noreclaim_*()Vlastimil Babka
Nandsim has own functions set_memalloc() and clear_memalloc() for robust setting and clearing of PF_MEMALLOC. Replace them by the new generic helpers. No functional change. Link: http://lkml.kernel.org/r/20170405074700.29871-5-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Richard Weinberger <richard@nod.at> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Chris Leech <cleech@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Lee Duncan <lduncan@suse.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08treewide: convert PF_MEMALLOC manipulations to new helpersVlastimil Babka
We now have memalloc_noreclaim_{save,restore} helpers for robust setting and clearing of PF_MEMALLOC. Let's convert the code which was using the generic tsk_restore_flags(). No functional change. [vbabka@suse.cz: in net/core/sock.c the hunk is missing] Link: http://lkml.kernel.org/r/20170405074700.29871-4-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Lee Duncan <lduncan@suse.com> Cc: Chris Leech <cleech@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Wouter Verhelst <w@uter.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08lustre: replace CURRENT_TIME macroDeepa Dinamani
CURRENT_TIME macro is not y2038 safe on 32 bit systems. The patch replaces all the uses of CURRENT_TIME by current_time() for filesystem times, and ktime_get_* functions for others. struct timespec is also not y2038 safe. Retain timespec for timestamp representation here as lustre uses it internally everywhere. These references will be changed to use struct timespec64 in a separate patch. This is also in preparation for the patch that transitions vfs timestamps to use 64 bit time and hence make them y2038 safe. current_time() is also planned to be transitioned to y2038 safe behavior along with this change. CURRENT_TIME macro will be deleted before merging the aforementioned change. Link: http://lkml.kernel.org/r/1491613030-11599-10-git-send-email-deepa.kernel@gmail.com Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08fs: ceph: CURRENT_TIME with ktime_get_real_ts()Deepa Dinamani
CURRENT_TIME is not y2038 safe. The macro will be deleted and all the references to it will be replaced by ktime_get_* apis. struct timespec is also not y2038 safe. Retain timespec for timestamp representation here as ceph uses it internally everywhere. These references will be changed to use struct timespec64 in a separate patch. The current_fs_time() api is being changed to use vfs struct inode* as an argument instead of struct super_block*. Set the new mds client request r_stamp field using ktime_get_real_ts() instead of using current_fs_time(). Also, since r_stamp is used as mtime on the server, use timespec_trunc() to truncate the timestamp, using the right granularity from the superblock. This api will be transitioned to be y2038 safe along with vfs. Link: http://lkml.kernel.org/r/1491613030-11599-5-git-send-email-deepa.kernel@gmail.com Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> M: Ilya Dryomov <idryomov@gmail.com> M: "Yan, Zheng" <zyan@redhat.com> M: Sage Weil <sage@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08format-security: move static strings to constKees Cook
While examining output from trial builds with -Wformat-security enabled, many strings were found that should be defined as "const", or as a char array instead of char pointer. This makes some static analysis easier, by producing fewer false positives. As these are all trivial changes, it seemed best to put them all in a single patch rather than chopping them up per maintainer. Link: http://lkml.kernel.org/r/20170405214711.GA5711@beast Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Jes Sorensen <jes@trained-monkey.org> [runner.c] Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Jiri Slaby <jslaby@suse.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Jarod Wilson <jarod@redhat.com> Cc: Florian Westphal <fw@strlen.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Kejian Yan <yankejian@huawei.com> Cc: Daode Huang <huangdaode@hisilicon.com> Cc: Qianqian Xie <xieqianqian@huawei.com> Cc: Philippe Reynes <tremyfr@gmail.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Christian Gromm <christian.gromm@microchip.com> Cc: Andrey Shvetsov <andrey.shvetsov@k2l.de> Cc: Jason Litzinger <jlitzingerdev@gmail.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08drivers/scsi/megaraid: remove expensive inline from megasas_return_cmdAndi Kleen
Remove an inline from a fairly big function that is used often. It's unlikely that calling or not calling it makes a lot of difference. Saves around 8k text in my kernel. text data bss dec hex filename 9047801 5367568 11116544 25531913 1859609 vmlinux-before-megasas 9039417 5367568 11116544 25523529 1857549 vmlinux-megasas Link: http://lkml.kernel.org/r/20170315021431.13107-7-andi@firstfloor.org Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Kashyap Desai <kashyap.desai@avagotech.com> Cc: Sumit Saxena <sumit.saxena@avagotech.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08drivers/staging/media/atomisp/pci/atomisp2: use set_memory.hAndrew Morton
Cc: Laura Abbott <labbott@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08drivers/video/fbdev/vermilion/vermilion.c: use set_memory.h headerLaura Abbott
set_memory_* functions have moved to set_memory.h. Switch to this explicitly. Link: http://lkml.kernel.org/r/1488920133-27229-16-git-send-email-labbott@redhat.com Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08drivers/misc/sram-exec.c: use set_memory.h headerLaura Abbott
set_memory_* functions have moved to set_memory.h. Switch to this explicitly. Link: http://lkml.kernel.org/r/1488920133-27229-15-git-send-email-labbott@redhat.com Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08drivers/watchdog/hpwdt.c: use set_memory.h headerLaura Abbott
set_memory_* functions have moved to set_memory.h. Switch to this explicitly. Link: http://lkml.kernel.org/r/1488920133-27229-10-git-send-email-labbott@redhat.com Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08drivers/hwtracing/intel_th/msu.c: use set_memory.h headerLaura Abbott
set_memory_* functions have moved to set_memory.h. Switch to this explicitly. Link: http://lkml.kernel.org/r/1488920133-27229-9-git-send-email-labbott@redhat.com Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08drm: use set_memory.h headerLaura Abbott
set_memory_* functions have moved to set_memory.h. Switch to this explicitly. [akpm@linux-foundation.org: track drivers/gpu/drm/i915/i915_gem_gtt.c linux-next changes] Link: http://lkml.kernel.org/r/1488920133-27229-8-git-send-email-labbott@redhat.com Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08agp: use set_memory.h headerLaura Abbott
set_memory_* functions have moved to set_memory.h. Switch to this explicitly. Link: http://lkml.kernel.org/r/1488920133-27229-7-git-send-email-labbott@redhat.com Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08treewide: spelling: correct diffrent[iate] and banlance typosJoe Perches
Add these misspellings to scripts/spelling.txt too Link: http://lkml.kernel.org/r/962aace119675e5fe87be2a88ddac1a5486f8e60.1490931810.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08scripts/spelling.txt: add "intialise(d)" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: intialisation||initialisation intialised||initialised intialise||initialise This commit does not intend to change the British spelling itself. Link: http://lkml.kernel.org/r/1481573103-11329-18-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08scripts/spelling.txt: add regsiter -> register spelling mistakeStephen Boyd
This typo is quite common. Fix it and add it to the spelling file so that checkpatch catches it earlier. Link: http://lkml.kernel.org/r/20170317011131.6881-2-sboyd@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08scripts/spelling.txt: add "memory" pattern and fix typosStephen Boyd
Fix typos and add the following to the scripts/spelling.txt: momery||memory Link: http://lkml.kernel.org/r/20170317011131.6881-1-sboyd@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-21 02:05:52 +0000