summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-05-02Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 4.12 merge window.
2017-05-02infiniband: avoid dereferencing uninitialized dst on error pathPaolo Abeni
With commit eea40b8f624f ("infiniband: call ipv6 route lookup via the stub interface"), if the route lookup fails due to ipv6 being disabled, the dst variable is left untouched, and the following dst_release() may access uninitialized memory. Since ipv6_dst_lookup() always sets dst to NULL in case of lookup failure with ipv6 enabled, fix the above just returning the error code if the lookup fails. Fixes: eea40b8f624 ("infiniband: call ipv6 route lookup via the stub interface") Reported-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-02blk-mq: update ->init_request and ->exit_request prototypesChristoph Hellwig
Remove the request_idx parameter, which can't be used safely now that we support I/O schedulers with blk-mq. Except for a superflous check in mtip32xx it was unused anyway. Also pass the tag_set instead of just the driver data - this allows drivers to avoid some code duplication in a follow on cleanup. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-02Revert "mtip32xx: pass BLK_MQ_F_NO_SCHED"Jens Axboe
This reverts commit 4981d04dd8f1ab19e2cce008da556d7f099b6e68. The driver has been converted to using the proper infrastructure for issuing internal commands. This means it's now safe to use with the scheduling infrastruture, so we can now revert the change that turned off scheduling for mtip32xx. Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-02mtip32xx: convert internal command issue to block IO pathJens Axboe
The driver special cases certain things for command issue, depending on whether it's an internal command or not. Make the internal commands use the regular infrastructure for issuing IO. Since this is an 8-group souped up AHCI variant, we have to deal with NCQ vs non-queueable commands. Do this from the queue_rq handler, by backing off unless the drive is idle. Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-02mtip32xx: abstract out "are any commands active" helperJens Axboe
This is a prep patch for backoff in ->queue_rq() for non-ncq commands. Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-02mtip32xx: kill atomic argument to mtip_quiesce_io()Jens Axboe
All callers now pass in GFP_KERNEL, get rid of the argument. Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-02mtip32xx: get rid of 'atomic' argument to mtip_exec_internal_command()Jens Axboe
All callers can safely block. Kill the atomic/block argument, and remove the argument from all callers. Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-02cxl: Mask slice error interrupts after first occurrenceAlastair D'Silva
In some situations, a faulty AFU slice may create an interrupt storm of slice errors, rendering the machine unusable. Since these interrupts are informational only, present the interrupt once, then mask it off to prevent it from being retriggered until the AFU is reset. Signed-off-by: Alastair D'Silva <alastair@d-silva.org> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-02cxl: Route eeh events to all drivers in cxl_pci_error_detected()Vaibhav Jain
Fix a boundary condition where in some cases an eeh event that results in card reset isn't passed on to a driver attached to the virtual PCI device associated with a slice. This will happen in case when a slice attached device driver returns a value other than PCI_ERS_RESULT_NEED_RESET from the eeh error_detected() callback. This would result in an early return from cxl_pci_error_detected() and other drivers attached to other AFUs on the card wont be notified. The patch fixes this by making sure that all slice attached device-drivers are notified and the return values from error_detected() callback are aggregated in a scheme where request for 'disconnect' trumps all and 'none' trumps 'need_reset'. Fixes: 9e8df8a21963 ("cxl: EEH support") Cc: stable@vger.kernel.org # v4.3+ Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-02cxl: Force context lock during EEH flowVaibhav Jain
During an eeh event when the cxl card is fenced and card sysfs attr perst_reloads_same_image is set following warning message is seen in the kernel logs: Adapter context unlocked with 0 active contexts ------------[ cut here ]------------ WARNING: CPU: 12 PID: 627 at ../drivers/misc/cxl/main.c:325 cxl_adapter_context_unlock+0x60/0x80 [cxl] Even though this warning is harmless, it clutters the kernel log during an eeh event. This warning is triggered as the EEH callback cxl_pci_error_detected doesn't obtain a context-lock before forcibly detaching all active context and when context-lock is released during call to cxl_configure_adapter from cxl_pci_slot_reset, a warning in cxl_adapter_context_unlock is triggered. To fix this warning, we acquire the adapter context-lock via cxl_adapter_context_lock() in the eeh callback cxl_pci_error_detected() once all the virtual AFU PHBs are notified and their contexts detached. The context-lock is released in cxl_pci_slot_reset() after the adapter is successfully reconfigured and before the we call the slot_reset callback on slice attached device-drivers. Fixes: 70b565bbdb91 ("cxl: Prevent adapter reset if an active context exists") Cc: stable@vger.kernel.org # v4.9+ Reported-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Tested-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-02drivers/video/fbdev/omap/lcd_mipid.c: Use time comparison kernel macrosKarim Eshapa
Use time_before_eq time comparison defind kernel macro that has safety check. Signed-off-by: Karim Eshapa <karim.eshapa@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-05-02sm501fb: don't return zero on failure path in sm501fb_start()Alexey Khoroshilov
If fbmem iomemory mapping failed, sm501fb_start() breaks off initialization, deallocates resources, but returns zero. As a result, double deallocation can happen in sm501fb_stop(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-05-02video: fbdev: udlfb: Fix buffer on stackMaksim Salau
Allocate buffers on HEAP instead of STACK for local array that is to be sent using usb_control_msg(). Signed-off-by: Maksim Salau <maksim.salau@gmail.com> Cc: Bernie Thompson <bernie@plugable.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-05-02xen: Implement EFI reset_system callbackJulien Grall
When rebooting DOM0 with ACPI on ARM64, the kernel is crashing with the stack trace [1]. This is happening because when EFI runtimes are enabled, the reset code (see machine_restart) will first try to use EFI restart method. However, the EFI restart code is expecting the reset_system callback to be always set. This is not the case for Xen and will lead to crash. The EFI restart helper is used in multiple places and some of them don't not have fallback (see machine_power_off). So implement reset_system callback as a call to xen_reboot when using EFI Xen. [ 36.999270] reboot: Restarting system [ 37.002921] Internal error: Attempting to execute userspace memory: 86000004 [#1] PREEMPT SMP [ 37.011460] Modules linked in: [ 37.014598] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 4.11.0-rc1-00003-g1e248b60a39b-dirty #506 [ 37.023903] Hardware name: (null) (DT) [ 37.027734] task: ffff800902068000 task.stack: ffff800902064000 [ 37.033739] PC is at 0x0 [ 37.036359] LR is at efi_reboot+0x94/0xd0 [ 37.040438] pc : [<0000000000000000>] lr : [<ffff00000880f2c4>] pstate: 404001c5 [ 37.047920] sp : ffff800902067cf0 [ 37.051314] x29: ffff800902067cf0 x28: ffff800902068000 [ 37.056709] x27: ffff000008992000 x26: 000000000000008e [ 37.062104] x25: 0000000000000123 x24: 0000000000000015 [ 37.067499] x23: 0000000000000000 x22: ffff000008e6e250 [ 37.072894] x21: ffff000008e6e000 x20: 0000000000000000 [ 37.078289] x19: ffff000008e5d4c8 x18: 0000000000000010 [ 37.083684] x17: 0000ffffa7c27470 x16: 00000000deadbeef [ 37.089079] x15: 0000000000000006 x14: ffff000088f42bef [ 37.094474] x13: ffff000008f42bfd x12: ffff000008e706c0 [ 37.099870] x11: ffff000008e70000 x10: 0000000005f5e0ff [ 37.105265] x9 : ffff800902067a50 x8 : 6974726174736552 [ 37.110660] x7 : ffff000008cc6fb8 x6 : ffff000008cc6fb0 [ 37.116055] x5 : ffff000008c97dd8 x4 : 0000000000000000 [ 37.121453] x3 : 0000000000000000 x2 : 0000000000000000 [ 37.126845] x1 : 0000000000000000 x0 : 0000000000000000 [ 37.132239] [ 37.133808] Process systemd-shutdow (pid: 1, stack limit = 0xffff800902064000) [ 37.141118] Stack: (0xffff800902067cf0 to 0xffff800902068000) [ 37.146949] 7ce0: ffff800902067d40 ffff000008085334 [ 37.154869] 7d00: 0000000000000000 ffff000008f3b000 ffff800902067d40 ffff0000080852e0 [ 37.162787] 7d20: ffff000008cc6fb0 ffff000008cc6fb8 ffff000008c7f580 ffff000008c97dd8 [ 37.170706] 7d40: ffff800902067d60 ffff0000080e2c2c 0000000000000000 0000000001234567 [ 37.178624] 7d60: ffff800902067d80 ffff0000080e2ee8 0000000000000000 ffff0000080e2df4 [ 37.186544] 7d80: 0000000000000000 ffff0000080830f0 0000000000000000 00008008ff1c1000 [ 37.194462] 7da0: ffffffffffffffff 0000ffffa7c4b1cc 0000000000000000 0000000000000024 [ 37.202380] 7dc0: ffff800902067dd0 0000000000000005 0000fffff24743c8 0000000000000004 [ 37.210299] 7de0: 0000fffff2475f03 0000000000000010 0000fffff2474418 0000000000000005 [ 37.218218] 7e00: 0000fffff2474578 000000000000000a 0000aaaad6b722c0 0000000000000001 [ 37.226136] 7e20: 0000000000000123 0000000000000038 ffff800902067e50 ffff0000081e7294 [ 37.234055] 7e40: ffff800902067e60 ffff0000081e935c ffff800902067e60 ffff0000081e9388 [ 37.241973] 7e60: ffff800902067eb0 ffff0000081ea388 0000000000000000 00008008ff1c1000 [ 37.249892] 7e80: ffffffffffffffff 0000ffffa7c4a79c 0000000000000000 ffff000000020000 [ 37.257810] 7ea0: 0000010000000004 0000000000000000 0000000000000000 ffff0000080830f0 [ 37.265729] 7ec0: fffffffffee1dead 0000000028121969 0000000001234567 0000000000000000 [ 37.273651] 7ee0: ffffffffffffffff 8080000000800000 0000800000008080 feffa9a9d4ff2d66 [ 37.281567] 7f00: 000000000000008e feffa9a9d5b60e0f 7f7fffffffff7f7f 0101010101010101 [ 37.289485] 7f20: 0000000000000010 0000000000000008 000000000000003a 0000ffffa7ccf588 [ 37.297404] 7f40: 0000aaaad6b87d00 0000ffffa7c4b1b0 0000fffff2474be0 0000aaaad6b88000 [ 37.305326] 7f60: 0000fffff2474fb0 0000000001234567 0000000000000000 0000000000000000 [ 37.313240] 7f80: 0000000000000000 0000000000000001 0000aaaad6b70d4d 0000000000000000 [ 37.321159] 7fa0: 0000000000000001 0000fffff2474ea0 0000aaaad6b5e2e0 0000fffff2474e80 [ 37.329078] 7fc0: 0000ffffa7c4b1cc 0000000000000000 fffffffffee1dead 000000000000008e [ 37.336997] 7fe0: 0000000000000000 0000000000000000 9ce839cffee77eab fafdbf9f7ed57f2f [ 37.344911] Call trace: [ 37.347437] Exception stack(0xffff800902067b20 to 0xffff800902067c50) [ 37.353970] 7b20: ffff000008e5d4c8 0001000000000000 0000000080f82000 0000000000000000 [ 37.361883] 7b40: ffff800902067b60 ffff000008e17000 ffff000008f44c68 00000001081081b4 [ 37.369802] 7b60: ffff800902067bf0 ffff000008108478 0000000000000000 ffff000008c235b0 [ 37.377721] 7b80: ffff800902067ce0 0000000000000000 0000000000000000 0000000000000015 [ 37.385643] 7ba0: 0000000000000123 000000000000008e ffff000008992000 ffff800902068000 [ 37.393557] 7bc0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 37.401477] 7be0: 0000000000000000 ffff000008c97dd8 ffff000008cc6fb0 ffff000008cc6fb8 [ 37.409396] 7c00: 6974726174736552 ffff800902067a50 0000000005f5e0ff ffff000008e70000 [ 37.417318] 7c20: ffff000008e706c0 ffff000008f42bfd ffff000088f42bef 0000000000000006 [ 37.425234] 7c40: 00000000deadbeef 0000ffffa7c27470 [ 37.430190] [< (null)>] (null) [ 37.434982] [<ffff000008085334>] machine_restart+0x6c/0x70 [ 37.440550] [<ffff0000080e2c2c>] kernel_restart+0x6c/0x78 [ 37.446030] [<ffff0000080e2ee8>] SyS_reboot+0x130/0x228 [ 37.451337] [<ffff0000080830f0>] el0_svc_naked+0x24/0x28 [ 37.456737] Code: bad PC value [ 37.459891] ---[ end trace 76e2fc17e050aecd ]--- Signed-off-by: Julien Grall <julien.grall@arm.com> -- Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org The x86 code has theoritically a similar issue, altought EFI does not seem to be the preferred method. I have only built test it on x86. This should also probably be fixed in stable tree. Changes in v2: - Implement xen_efi_reset_system using xen_reboot - Move xen_efi_reset_system in drivers/xen/efi.c Signed-off-by: Juergen Gross <jgross@suse.com>
2017-05-02xen: Revert commits da72ff5bfcb0 and 72a9b186292dBoris Ostrovsky
Recent discussion (http://marc.info/?l=xen-devel&m=149192184523741) established that commit 72a9b186292d ("xen: Remove event channel notification through Xen PCI platform device") (and thus commit da72ff5bfcb0 ("partially revert "xen: Remove event channel notification through Xen PCI platform device"")) are unnecessary and, in fact, prevent HVM guests from booting on Xen releases prior to 4.0 Therefore we revert both of those commits. The summary of that discussion is below: Here is the brief summary of the current situation: Before the offending commit (72a9b186292): 1) INTx does not work because of the reset_watches path. 2) The reset_watches path is only taken if you have Xen > 4.0 3) The Linux Kernel by default will use vector inject if the hypervisor support. So even INTx does not work no body running the kernel with Xen > 4.0 would notice. Unless he explicitly disabled this feature either in the kernel or in Xen (and this can only be disabled by modifying the code, not user-supported way to do it). After the offending commit (+ partial revert): 1) INTx is no longer support for HVM (only for PV guests). 2) Any HVM guest The kernel will not boot on Xen < 4.0 which does not have vector injection support. Since the only other mode supported is INTx which. So based on this summary, I think before commit (72a9b186292) we were in much better position from a user point of view. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-05-02xen/scsifront: use offset_in_page() macroGeliang Tang
Use offset_in_page() macro instead of open-coding. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-05-02xen/arm,arm64: rename __generic_dma_ops to xen_get_dma_opsStefano Stabellini
Now that __generic_dma_ops is a xen specific function, rename it to xen_get_dma_ops. Change all the call sites appropriately. Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: linux@armlinux.org.uk CC: catalin.marinas@arm.com CC: will.deacon@arm.com CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: Julien Grall <julien.grall@arm.com>
2017-05-02xen/balloon: decorate PV-only parts with #ifdef CONFIG_XEN_PVVitaly Kuznetsov
Balloon driver uses several PV-only concepts (xen_start_info, xen_extra_mem,..) and it seems the simpliest solution to make HVM-only build happy is to decorate these parts with #ifdefs. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-05-02Merge branch 'for-4.12/asus' into for-linusJiri Kosina
2017-05-02Merge branch 'for-4.12/sony' into for-linusJiri Kosina
2017-05-02Merge branches 'for-4.11/upstream-fixes', 'for-4.12/accutouch', ↵Jiri Kosina
'for-4.12/cp2112', 'for-4.12/hid-core-null-state-handling', 'for-4.12/hiddev', 'for-4.12/i2c-hid', 'for-4.12/innomedia', 'for-4.12/logitech-hidpp-battery-power-supply', 'for-4.12/multitouch', 'for-4.12/nti', 'for-4.12/upstream' and 'for-4.12/wacom' into for-linus
2017-05-02drm/edid: Add 10 bpc quirk for LGD 764 panel in HP zBook 17 G2Mario Kleiner
The builtin eDP panel in the HP zBook 17 G2 supports 10 bpc, as advertised by the Laptops product specs and verified via injecting a fixed edid + photometer measurements, but edid reports unknown depth, so drivers fall back to 6 bpc. Add a quirk to get the full 10 bpc. Cc: stable@vger.kernel.org Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1492787108-23959-1-git-send-email-mario.kleiner.de@gmail.com
2017-05-01Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm updates from Ingo Molnar: "The main x86 MM changes in this cycle were: - continued native kernel PCID support preparation patches to the TLB flushing code (Andy Lutomirski) - various fixes related to 32-bit compat syscall returning address over 4Gb in applications, launched from 64-bit binaries - motivated by C/R frameworks such as Virtuozzo. (Dmitry Safonov) - continued Intel 5-level paging enablement: in particular the conversion of x86 GUP to the generic GUP code. (Kirill A. Shutemov) - x86/mpx ABI corner case fixes/enhancements (Joerg Roedel) - ... plus misc updates, fixes and cleanups" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits) mm, zone_device: Replace {get, put}_zone_device_page() with a single reference to fix pmem crash x86/mm: Fix flush_tlb_page() on Xen x86/mm: Make flush_tlb_mm_range() more predictable x86/mm: Remove flush_tlb() and flush_tlb_current_task() x86/vm86/32: Switch to flush_tlb_mm_range() in mark_screen_rdonly() x86/mm/64: Fix crash in remove_pagetable() Revert "x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation" x86/boot/e820: Remove a redundant self assignment x86/mm: Fix dump pagetables for 4 levels of page tables x86/mpx, selftests: Only check bounds-vs-shadow when we keep shadow x86/mpx: Correctly report do_mpx_bt_fault() failures to user-space Revert "x86/mm/numa: Remove numa_nodemask_from_meminfo()" x86/espfix: Add support for 5-level paging x86/kasan: Extend KASAN to support 5-level paging x86/mm: Add basic defines/helpers for CONFIG_X86_5LEVEL=y x86/paravirt: Add 5-level support to the paravirt code x86/mm: Define virtual memory map for 5-level paging x86/asm: Remove __VIRTUAL_MASK_SHIFT==47 assert x86/boot: Detect 5-level paging support x86/mm/numa: Remove numa_nodemask_from_meminfo() ...
2017-05-01Merge branch 'x86-vdso-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 vdso updates from Ingo Molnar: "Add support for vDSO acceleration of the "Hyper-V TSC page", to speed up clock reading on Hyper-V guests" * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Add VCLOCK_HVCLOCK vDSO clock read method x86/hyperv: Move TSC reading method to asm/mshyperv.h x86/hyperv: Implement hv_get_tsc_page()
2017-05-01Merge branch 'x86-debug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 debug updates from Ingo Molnar: "The biggest update is the addition of USB3 debug port based early-console. Greg was fine with the USB changes and with the routing of these patches: https://www.spinics.net/lists/linux-usb/msg155093.html" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: usb/doc: Add document for USB3 debug port usage usb/serial: Add DBC debug device support to usb_debug x86/earlyprintk: Add support for earlyprintk via USB3 debug port usb/early: Add driver for xhci debug capability x86/timers: Add simple udelay calibration
2017-05-01tcmu: Add global data block pool supportXiubo Li
For each target there will be one ring, when the target number grows larger and larger, it could eventually runs out of the system memories. In this patch for each target ring, currently for the cmd area the size will be fixed to 8MB and for the data area the size will grow from 0 to max 256K * PAGE_SIZE(1G for 4K page size). For all the targets' data areas, they will get empty blocks from the "global data block pool", which has limited to 512K * PAGE_SIZE(2G for 4K page size) for now. When the "global data block pool" has been used up, then any target could wake up the unmap thread routine to shrink other targets' data area memories. And the unmap thread routine will always try to truncate the ring vma from the last using block offset. When user space has touched the data blocks out of tcmu_cmd iov[], the tcmu_page_fault() will try to return one zeroed blocks. Here we move the timeout's tcmu_handle_completions() into unmap thread routine, that's to say when the timeout fired, it will only do the tcmu_check_expired_cmd() and then wake up the unmap thread to do the completions() and then try to shrink its idle memories. Then the cmdr_lock could be a mutex and could simplify this patch because the unmap_mapping_range() or zap_* may go to sleep. Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianfei Hu <hujianfei@cmss.chinamobile.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01tcmu: Add dynamic growing data area feature supportXiubo Li
Currently for the TCMU, the ring buffer size is fixed to 64K cmd area + 1M data area, and this will be bottlenecks for high iops. The struct tcmu_cmd_entry {} size is fixed about 112 bytes with iovec[N] & N <= 4, and the size of struct iovec is about 16 bytes. If N == 0, the ratio will be sizeof(cmd entry) : sizeof(datas) == 112Bytes : (N * 4096)Bytes = 28 : 0, no data area is need. If 0 < N <=4, the ratio will be sizeof(cmd entry) : sizeof(datas) == 112Bytes : (N * 4096)Bytes = 28 : (N * 1024), so the max will be 28 : 1024. If N > 4, the sizeof(cmd entry) will be [(N - 4) *16 + 112] bytes, and its corresponding data size will be [N * 4096], so the ratio of sizeof(cmd entry) : sizeof(datas) == [(N - 4) * 16 + 112)Bytes : (N * 4096)Bytes == 4/1024 - 12/(N * 1024), so the max is about 4 : 1024. When N is bigger, the ratio will be smaller. As the initial patch, we will set the cmd area size to 2M, and the cmd area size to 32M. The TCMU will dynamically grows the data area from 0 to max 32M size as needed. The cmd area memory will be allocated through vmalloc(), and the data area's blocks will be allocated individually later when needed. The allocated data area block memory will be managed via radix tree. For now the bitmap still be the most efficient way to search and manage the block index, this could be update later. Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianfei Hu <hujianfei@cmss.chinamobile.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01target: fixup error message in target_tg_pt_gp_tg_pt_gp_id_store()Hannes Reinecke
When setting up an ALUA target port group with an invalid ID the error message kstrtoul() returned -22 for tg_pt_gp_id is displayed, which is not really helpful. Convert it to something sane. And while we're at it, join the messages onto a single line. Signed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01target: fixup error message in target_tg_pt_gp_alua_access_type_store()Hannes Reinecke
When setting up a target the error message: Unable to do set ##_name ALUA state on non valid tg_pt_gp ID: 0 is displayed. Apparently concatenation doesn't work in a string; one should be using implicit string concatenation here. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01target/user: PGR SupportBryant G. Ly
This adds initial PGR support for just TCMU, since tcmu doesn't have the necessary IT_NEXUS info to process PGR in userspace, so have those commands be processed in kernel. HA support is not available yet, we will work on it if this patch is acceptable. Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01target: Add WRITE_VERIFY_16Bryant G. Ly
This patch addresses clients who needs write_verify_16 for large volume groups such as AIX. Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01target: Use kmalloc_array() in transport_kmap_data_sg()Markus Elfring
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01target: Use kmalloc_array() in compare_and_write_callback()Markus Elfring
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of a data structure by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01target: Improve size determinations in two functionsMarkus Elfring
Replace the specification of two data structures by pointer dereferences as the parameter for the operator "sizeof" to make the corresponding size determinations a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01target: Delete error messages for failed memory allocationsMarkus Elfring
The script "checkpatch.pl" pointed information out like the following. WARNING: Possible unnecessary 'out of memory' message Thus remove such statements here. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01target: Use kcalloc() in two functionsMarkus Elfring
* Multiplications for the size determination of memory allocations indicated that array data structures should be processed. Thus use the corresponding function "kcalloc". This issue was detected by using the Coccinelle software. * Replace the specification of data structures by pointer dereferences to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01iscsi-target: Improve size determinations in four functionsMarkus Elfring
Replace the specification of four data structures by pointer dereferences as the parameter for the operator "sizeof" to make the corresponding size determinations a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01iscsi-target: Delete error messages for failed memory allocationsMarkus Elfring
The script "checkpatch.pl" pointed information out like the following. WARNING: Possible unnecessary 'out of memory' message Thus remove such statements here. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01iscsi-target: Use kcalloc() in iscsit_allocate_iovecs()Markus Elfring
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kcalloc". This issue was detected by using the Coccinelle software. * Replace the specification of a data structure by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01tcm: make pi data verification configurableDmitry Monakhov
Currently ramdisk and fileio always perform PI verification before and after backend IO. This approach is not very flexible. Because some one may want to postpone this work to other layers in IO stack. For example if we want to test blk_integrity_profile testcase: https://github.com/dmonakhov/xfstests/commit/dee408c868861d6b6871dbb3381facee7effdbe4 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01tcm_fileio: Prevent information leak for short readsDmitry Monakhov
If we failed to read data from backing file (probably because some one truncate file under us), we must zerofill cmd's data, otherwise it will be returned as is. Most likely cmd's data are unitialized pages from page cache. This result in information leak. (Change BUG_ON into -EINVAL se_cmd failure - nab) testcase: https://github.com/dmonakhov/xfstests/commit/e11a1b7b907ca67b1be51a1594025600767366d5 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01target: Fix VERIFY and WRITE VERIFY command parsingBart Van Assche
Use the value of the BYTCHK field to determine the size of the Data-Out buffer. For VERIFY, honor the VRPROTECT, DPO and FUA fields. This patch avoids that LIO complains about a mismatch between the expected transfer length and the SCSI CDB length if the value of the BYTCHK field is 0. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Max Lohrmann <post@wickenrode.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01target/pr: update PR out action code tableZhu Lingshan
This commit updated persistent revervation out service action code table in SPC-5 for development. Signed-off-by: Zhu Lingshan <lszhu@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01target/iblock: convert iblock_req.pending from atomic_t to refcount_tElena Reshetova
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot updates from Ingo Molnar: "The biggest changes in this cycle were: - reworking of the e820 code: separate in-kernel and boot-ABI data structures and apply a whole range of cleanups to the kernel side. No change in functionality. - enable KASLR by default: it's used by all major distros and it's out of the experimental stage as well. - ... misc fixes and cleanups" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits) x86/KASLR: Fix kexec kernel boot crash when KASLR randomization fails x86/reboot: Turn off KVM when halting a CPU x86/boot: Fix BSS corruption/overwrite bug in early x86 kernel startup x86: Enable KASLR by default boot/param: Move next_arg() function to lib/cmdline.c for later reuse x86/boot: Fix Sparse warning by including required header file x86/boot/64: Rename start_cpu() x86/xen: Update e820 table handling to the new core x86 E820 code x86/boot: Fix pr_debug() API braindamage xen, x86/headers: Add <linux/device.h> dependency to <asm/xen/page.h> x86/boot/e820: Simplify e820__update_table() x86/boot/e820: Separate the E820 ABI structures from the in-kernel structures x86/boot/e820: Fix and clean up e820_type switch() statements x86/boot/e820: Rename the remaining E820 APIs to the e820__*() prefix x86/boot/e820: Remove unnecessary #include's x86/boot/e820: Rename e820_mark_nosave_regions() to e820__register_nosave_regions() x86/boot/e820: Rename e820_reserve_resources*() to e820__reserve_resources*() x86/boot/e820: Use bool in query APIs x86/boot/e820: Document e820__reserve_setup_data() x86/boot/e820: Clean up __e820__update_table() et al ...
2017-05-01Merge branch 'ras-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS updates from Ingo Molnar: "The main changes in this cycle were: - add the 'Corrected Errors Collector' kernel feature which collect and monitor correctable errors statistics and will preemptively (soft-)offline physical pages that have a suspiciously high error count. - handle MCE errors during kexec() more gracefully - factor out and deprecate the /dev/mcelog driver - ... plus misc fixes and cleanpus" * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Check MCi_STATUS[MISCV] for usable addr on Intel only ACPI/APEI: Use setup_deferrable_timer() x86/mce: Update notifier priority check x86/mce: Enable PPIN for Knights Landing/Mill x86/mce: Do not register notifiers with invalid prio x86/mce: Factor out and deprecate the /dev/mcelog driver RAS: Add a Corrected Errors Collector x86/mce: Rename mce_log to mce_log_buffer x86/mce: Rename mce_log()'s argument x86/mce: Init some CPU features early x86/mce: Handle broadcasted MCE gracefully with kexec
2017-05-01Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main changes in this cycle were: Kernel side changes: - Kprobes and uprobes changes: - Make their trampolines read-only while they are used - Make UPROBES_EVENTS default-y which is the distro practice - Apply misc fixes and robustization to probe point insertion. - add support for AMD IOMMU events - extend hw events on Intel Goldmont CPUs - ... plus misc fixes and updates. Tooling side changes: - support s390 jump instructions in perf annotate (Christian Borntraeger) - vendor hardware events updates (Andi Kleen) - add argument support for SDT events in powerpc (Ravi Bangoria) - beautify the statx syscall arguments in 'perf trace' (Arnaldo Carvalho de Melo) - handle inline functions in callchains (Jin Yao) - enable sorting by srcline as key (Milian Wolff) - add 'brstackinsn' field in 'perf script' to reuse the x86 instruction decoder used in the Intel PT code to study hot paths to samples (Andi Kleen) - add PERF_RECORD_NAMESPACES so that the kernel can record information required to associate samples to namespaces, helping in container problem characterization. (Hari Bathini) - allow sorting by symbol_size in 'perf report' and 'perf top' (Charles Baylis) - in perf stat, make system wide (-a) the default option if no target was specified and one of following conditions is met: - no workload specified (current behaviour) - a workload is specified but all requested events are system wide ones, like uncore ones. (Jiri Olsa) - ... plus lots of other updates, enhancements, cleanups and fixes" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (235 commits) perf tools: Fix the code to strip command name tools arch x86: Sync cpufeatures.h tools arch: Sync arch/x86/lib/memcpy_64.S with the kernel tools: Update asm-generic/mman-common.h copy from the kernel perf tools: Use just forward declarations for struct thread where possible perf tools: Add the right header to obtain PERF_ALIGN() perf tools: Remove poll.h and wait.h from util.h perf tools: Remove string.h, unistd.h and sys/stat.h from util.h perf tools: Remove stale prototypes from builtin.h perf tools: Remove string.h from util.h perf tools: Remove sys/ioctl.h from util.h perf tools: Remove a few more needless includes from util.h perf tools: Include sys/param.h where needed perf callchain: Move callchain specific routines from util.[ch] perf tools: Add compress.h for the *_decompress_to_file() headers perf mem: Fix display of data source snoop indication perf debug: Move dump_stack() and sighandler_dump_stack() to debug.h perf kvm: Make function only used by 'perf kvm' static perf tools: Move timestamp routines from util.h to time-utils.h perf tools: Move units conversion/formatting routines to separate object ...
2017-05-01Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this cycle were: - another round of rq-clock handling debugging, robustization and fixes - PELT accounting improvements - CPU hotplug related ->cpus_allowed affinity handling fixes all around the tree - ... plus misc fixes, cleanups and updates" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits) sched/x86: Update reschedule warning text crypto: N2 - Replace racy task affinity logic cpufreq/sparc-us2e: Replace racy task affinity logic cpufreq/sparc-us3: Replace racy task affinity logic cpufreq/sh: Replace racy task affinity logic cpufreq/ia64: Replace racy task affinity logic ACPI/processor: Replace racy task affinity logic ACPI/processor: Fix error handling in __acpi_processor_start() sparc/sysfs: Replace racy task affinity logic powerpc/smp: Replace open coded task affinity logic ia64/sn/hwperf: Replace racy task affinity logic ia64/salinfo: Replace racy task affinity logic workqueue: Provide work_on_cpu_safe() ia64/topology: Remove cpus_allowed manipulation sched/fair: Move the PELT constants into a generated header sched/fair: Increase PELT accuracy for small tasks sched/fair: Fix comments sched/Documentation: Add 'sched-pelt' tool sched/fair: Fix corner case in __accumulate_sum() sched/core: Remove 'task' parameter and rename tsk_restore_flags() to current_restore_flags() ...
2017-05-01Merge branch 'efi-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Ingo Molnar: "The main changes in this cycle were: - move BGRT handling to drivers/acpi so it can be shared between x86 and ARM - bring the EFI stub's initrd and FDT allocation logic in line with the latest changes to the arm64 boot protocol - improvements and fixes to the EFI stub's command line parsing routines - randomize the virtual mapping of the UEFI runtime services on ARM/arm64 - ... and other misc enhancements, cleanups and fixes" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/libstub/arm: Don't use TASK_SIZE when randomizing the RT space ef/libstub/arm/arm64: Randomize the base of the UEFI rt services region efi/libstub/arm/arm64: Disable debug prints on 'quiet' cmdline arg efi/libstub: Unify command line param parsing efi/libstub: Fix harmless command line parsing bug efi/arm32-stub: Allow boot-time allocations in the vmlinux region x86/efi: Clean up a minor mistake in comment efi/pstore: Return error code (if any) from efi_pstore_write() efi/bgrt: Enable ACPI BGRT handling on arm64 x86/efi/bgrt: Move efi-bgrt handling out of arch/x86 efi/arm-stub: Round up FDT allocation to mapping size efi/arm-stub: Correct FDT and initrd allocation rules for arm64
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-01 02:07:51 +0000