| Age | Commit message (Collapse) | Author |
|---|
|
Enable or disable BGX LMAC's RX/TX based on corresponding VF's
status. If otherwise, when multiple LMAC's physical link is up
then packets from all LMAC's whose corresponding VF is not yet
initialized will get forwarded to VF0. This is due to VNIC's default
configuration where CPI, RSSI e.t.c point to VF0/QSET0/RQ0.
This patch will prevent multiple copies of packets on VF0.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Call netif_carrier_on() only if interface's link is up. Switching this on
upon IFF_UP by default, is causing issues with ethernet channel bonding
in LACP mode. Initial NETDEV_CHANGE notification was being skipped.
Also fixed some issues with link/speed/duplex reporting via ethtool.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Properly set CQ timer threshold and also set it to 2us.
With previous incorrect settings it was set to 0.5us which is too less.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While VNIC or BGX driver teardown, wait for already scheduled delayed work to
finish before destroying it.
Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@caviumnetworks.com>
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@caviumnetworks.com>
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As soon as we leave the spinlock after the job has been added to the job
queue, we can no longer rely on the job's data to be available.
I have seen a null-pointer dereference due to sched == NULL in
amd_sched_wakeup via amd_sched_entity_push_job and
amd_sched_ib_submit_kernel_helper. Since the latter initializes
sched_job->sched with the address of the ring scheduler, which is
guaranteed to be non-NULL, this race appears to be a likely culprit.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Bugzilla: https://bugs.freedesktop.org/attachment.cgi?bugid=93079
Reviewed-by: Christian König <christian.koenig@amd.com>
|
|
Missing error check if the operation failed.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
|
|
The SCSI sd driver probes SCSI devices asynchronously. The sd_remove()
function, called indirectly by device_del(), waits until asynchronous
probing has finished. Since the block layer queue must only be cleaned
up after probing has finished, device_del() has to be called before
blk_cleanup_queue(). Hence revert commit bf2cf3baa20b.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
- regression fix for hid-lg driver from Benjamin Tissoires
- quirk for Logitech G710+ from Jimmy Berry
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: lg: restrict filtering out of first interface to G29 only
HID: usbhid: add Logitech G710+ keyboard quirk NOGET
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pincontrol fixes from Linus Walleij:
"These are some v4.4 pin control fixes:
- Drop a redundant if-clause from Kconfig
- Fix a missing of_node_put() memory leak in the Freescale i.MX
driver
- Fix 64bit compilation of the Qualcomm SSBI driver.
- Fix a logic inversion in the Mediatek driver.
- Fix a compilation error for the odd one off in the Super-H instance
of the SH PFC driver"
* tag 'pinctrl-v4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sh-pfc: sh7734: Add missing cfg macro parameter to fix build
pinctrl: mediatek: Add get_direction support.
pinctrl: fix qcom ssbi drivers for 64-bit compilation
pinctrl: imx1-core: add missing of_node_put
pinctrl: remove redundant if conditional from Kconfig
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Some GPIO fixes for the v4.4 series:
- Fix a bunch of possible NULL references found by Coccinelle
jockeys.
- Stop creating Tegra's debugfs on everything and its dog. This is
an ARM multiplatform kernel issue.
- Fix an oops in gpiolib for NULL names on named GPIOs.
- Fix a complex OMAP1 bug in the OMAP driver"
* tag 'gpio-v4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: omap: drop omap1 mpuio specific irq_mask/unmask callbacks
gpiolib: fix oops, if gpio name is NULL
gpio-tegra: Do not create the debugfs entry by default
gpio: palmas: fix a possible NULL dereference
gpio: syscon: fix a possible NULL dereference
gpio: 74xx: fix a possible NULL dereference
|
|
dm_btree_remove_leaves() only unmaps a contiguous region so we need a
loop, in __remove_range(), to handle ranges that contain multiple
regions.
A new btree function, dm_btree_lookup_next(), is introduced which is
more efficiently able to skip over regions of the thin device which
aren't mapped. __remove_range() uses dm_btree_lookup_next() for each
iteration of __remove_range()'s loop.
Also, improve description of dm_btree_remove_leaves().
Fixes: 6550f075 ("dm thin metadata: add dm_thin_remove_range()")
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 4.1+
|
|
The block allocated at the start of btree_split_sibling() is never
released if later insert_at() fails.
Fix this by releasing the previously allocated bufio block using
unlock_block().
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
|
|
There are platforms that don't need the full GMBUS power domain (BXT)
while others do (PCH, VLV/CHV). For optimizing this we would need to add
a new power domain, but it's not clear how much we would benefit given
the short time we hold the reference. So for now let's keep things
simple.
This fixes a regression introduced in
commit 237ed86c693d8a8e4db476976aeb30df4deac74b
Author: Sonika Jindal <sonika.jindal@intel.com>
Date: Tue Sep 15 09:44:20 2015 +0530
drm/i915: Check live status before reading edid
v2:
- fix commit message, PCH won't take any redundant power resource after
this change (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[fix commit message in v2 (Imre)]
[Cherry-picked from drm-intel-next-queued 29bb94bb (Imre)]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448643329-18675-6-git-send-email-imre.deak@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
MISSING_CASE() would have been useful to track down a recent problem in
intel_display_port_aux_power_domain(), so add it there and a few related
helpers. This was also suggested by Ville in his review of the latest
DMC/DC changes, we forgot to address that.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
[Cherry-picked from drm-intel-next-queued b9fec167 (Imre)]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448643329-18675-5-git-send-email-imre.deak@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Due to the current sharing of the DDI encoder between DP and HDMI
connectors we can run the DP detection after the HDMI detection has
already set the shared encoder's type. For now solve this keeping the
current behavior and running the detection in this case too. For a proper
solution Ville suggested to split the encoder into an HDMI and DP one, that
can be done as a follow-up.
This issue triggers the WARN in intel_display_port_aux_power_domain() and
was introduced in:
commit 25f78f58e5bfb46a270ce4d690fb49dc104558b1
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Mon Nov 16 15:01:04 2015 +0100
drm/i915: Clean up AUX power domain handling
CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
[Cherry-picked from drm-intel-next-queued 651174a4 (Imre)]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448643329-18675-4-git-send-email-imre.deak@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Currently the gmbus code uses intel_aux_display_runtime_get/put in an
effort to make sure the hardware is powered up sufficiently for gmbus.
That function only takes the runtime PM reference which on VLV/CHV/BXT
is not enough. We need the disp2d/pipe-a well on VLV/CHV and power well
2 on BXT. So add a new power domnain for gmbus and kill off the now
unused intel_aux_display_runtime_get/put. And change
intel_hdmi_set_edid() to use the gmbus power domain too since that's all
we need there.
Also toss in a BUILD_BUG_ON() to catch problems if we run out of
bits for power domains. We're already really close to the limit...
[Patrik: Add gmbus string to debugfs output]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
[Cherry-picked from drm-intel-next-queued f0ab43e6 (Imre)]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448643329-18675-3-git-send-email-imre.deak@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Introduce intel_display_port_aux_power_domain() which simply returns
the appropriate AUX power domain for a specific port, and then replace
the intel_display_port_power_domain() with calls to the new function
in the DP code. As long as we're not actually enabling the port we don't
need the lane power domains, and those are handled now purely from
modeset_update_crtc_power_domains().
My initial motivation for this was to see if I could keep the DPIO power
wells powered down while doing AUX on CHV, but turns out I can't so this
doesn't change anything for CHV at least. But I think it's still a
worthwile change.
v2: Add case for PORT E. Default to POWER_DOMAIN_AUX_D for now. (Ville)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
[Cherry-picked from drm-intel-next-queued 25f78f58 (Imre)]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448643329-18675-2-git-send-email-imre.deak@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The runtime PM core doesn't treat EBUSY and EAGAIN retvals from the driver
suspend hooks as errors, but they still show up as errors in dmesg. Tune
them down. See rpm_suspend() for details of handling these return values.
Note that we use dev_dbg() for the retryable retvals, so after this
change you'll need either CONFIG_DYNAMIC_DEBUG or CONFIG_PCI_DEBUG
for them to show up in the log.
One problem caused by this was noticed by Daniel: the i915 driver
returns EAGAIN to signal a temporary failure to suspend and as a request
towards the RPM core for scheduling a suspend again. This is a normal
event, but the resulting error message flags a breakage during the
driver's automated testing which parses dmesg and picks up the error.
Reported-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://bugs.freedesktop.org/show_bug.cgi?id=92992
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Recently genpd removed the requirement of a having a driver bound for its
attached devices to allow genpd to power off. That change should also have
removed a corresponding validation in the governor, let's correct that.
Fixes: 298cd0f08801 (PM / Domains: Remove dev->driver check for runtime)
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Looks like 29fae1c85 ("HID: logitech: Add support for G29") was a little
bit aggressive and broke other devices.
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=108121
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
https://github.com/markyzq/kernel-drm-rockchip into drm-fixes
Rockchip fixes from Mark.
* 'drm-fixes-rockchip-2015-12-02' of https://github.com/markyzq/kernel-drm-rockchip:
drm/rockchip: Use CRTC vblank event interface
drm/rockchip: Fix module autoload for OF platform driver
drm/rockchip: vop: fix window origin calculation
drm/rockchip: unset pgoff when mmap'ing gems
drm/rockchip: vop: Correct enabled clocks during setup
|
|
Passing -1 as the pipe for vblank events now triggers a WARN_ON, but had
previously made multi-screen unusable anyway. Pass the correct pipe to
the event-send function, and use the new API to make this a bit easier
for us.
Fixes WARN present since cc1ef118fc for every pageflip event sent:
[ 209.549969] ------------[ cut here ]------------
[ 209.554592] WARNING: CPU: 3 PID: 238 at drivers/gpu/drm/drm_irq.c:924 drm_vblank_count_and_time+0x80/0x88 [drm]()
[ 209.564832] Modules linked in: [...]
[ 209.612401] CPU: 3 PID: 238 Comm: irq/41-ff940000 Tainted: G W 4.3.0-rc6+ #71
[ 209.620647] Hardware name: Rockchip (Device Tree)
[ 209.625348] [<c001bb80>] (unwind_backtrace) from [<c001615c>] (show_stack+0x20/0x24)
[ 209.633079] [<c001615c>] (show_stack) from [<c02b2c50>] (dump_stack+0x8c/0x9c)
[ 209.640289] [<c02b2c50>] (dump_stack) from [<c0052e88>] (warn_slowpath_common+0x94/0xc4)
[ 209.648364] [<c0052e88>] (warn_slowpath_common) from [<c0052f74>] (warn_slowpath_null+0x2c/0x34)
[ 209.657139] [<c0052f74>] (warn_slowpath_null) from [<bf17dc30>] (drm_vblank_count_and_time+0x80/0x88 [drm])
[ 209.666875] [<bf17dc30>] (drm_vblank_count_and_time [drm]) from [<bf17e484>] (drm_send_vblank_event+0x74/0x7c [drm])
[ 209.677385] [<bf17e484>] (drm_send_vblank_event [drm]) from [<bf4c1144>] (vop_win_state_complete+0x4c/0x70 [rockchip_drm_vop])
[ 209.688757] [<bf4c1144>] (vop_win_state_complete [rockchip_drm_vop]) from [<bf4c3bdc>] (vop_isr_thread+0x170/0x1d4 [rockchip_drm_vop])
[ 209.700822] [<bf4c3bdc>] (vop_isr_thread [rockchip_drm_vop]) from [<c00ab93c>] (irq_thread_fn+0x2c/0x50)
[ 209.710284] [<c00ab93c>] (irq_thread_fn) from [<c00abcac>] (irq_thread+0x13c/0x188)
[ 209.717927] [<c00abcac>] (irq_thread) from [<c00723c8>] (kthread+0xec/0x104)
[ 209.724965] [<c00723c8>] (kthread) from [<c0011638>] (ret_from_fork+0x14/0x3c)
[ 209.732171] ---[ end trace 0690bc604f5d535d ]---
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Tested-By: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Thierry Reding <treding@nvidia.com>
|
|
Commit 4d6b4e69a245 ("x86/PCI/ACPI: Use common interface to support
PCI host bridge") converted x86 to use the common interface
acpi_pci_root_create, but the conversion missed on code piece in
arch/x86/pci/bus_numa.c, which causes regression on some legacy
AMD platforms as reported by Arthur Marsh <arthur.marsh@internode.on.net>.
The root causes is that acpi_pci_root_create() fails to insert
host bridge resources into iomem_resource/ioport_resource because
x86_pci_root_bus_resources() has already inserted those resources.
So change x86_pci_root_bus_resources() to not insert resources into
iomem_resource/ioport_resource.
Fixes: 4d6b4e69a245 ("x86/PCI/ACPI: Use common interface to support PCI host bridge")
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reported-and-tested-by: Arthur Marsh <arthur.marsh@internode.on.net>
Reported-and-tested-by: Krzysztof Kolasa <kkolasa@winsoft.pl>
Reported-and-tested-by: Keith Busch <keith.busch@intel.com>
Reported-and-tested-by: Hans de Bruin <jmdebruin@xmsnet.nl>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
|
|
VOP_WINx_DSP_ST does not require subtracting 1 from the values written to
it. It actually causes the screen to be shifted by one pixel.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Tested-by: Yakir Yang <ykk@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Dominik Behr <dbehr@chromium.org>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
|
|
Commit 371f0f085f629 ("ARM: 8426/1: dma-mapping: add missing range check
in dma_mmap()") introduced offset-checking for mappings, which collides
with the fake-offset the drm sets for gems.
Other drm-drivers set this offset to 0 before doing the mapping, so
this looks like the correct way to go for rockchip as well.
Fixes: 371f0f085f629 ("ARM: 8426/1: dma-mapping: add missing range check in dma_mmap()")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This patch is a cleanup to make following patch easier to
review.
Goal is to move SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA
from (struct socket)->flags to a (struct socket_wq)->flags
to benefit from RCU protection in sock_wake_async()
To ease backports, we rename both constants.
Two new helpers, sk_set_bit(int nr, struct sock *sk)
and sk_clear_bit(int net, struct sock *sk) are added so that
following patch can change their implementation.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recent patches added basic support for the Apple NVMe controller but
still cause resets and data corruption on that particular controller
when a specific pattern of read/flush commands occurs. Limiting the
queue depth to 2 works around that issue.
This patch enforces that limit only for the Apple controller and is
considered a temporary fix until we find the root source of that
problem.
Signed-off-by: Stephan Günther <guenther@tum.de>
Signed-off-by: Maurice Leclaire <leclaire@in.tum.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
vmxnet3_drv does not check dma_addr with dma_mapping_error()
after mapping dma memory. The patch adds the checks and
tries to handle failures.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The N_X25 line discipline may access the previous line discipline's closed
and already-freed private data on open [1].
The tty->disc_data field _never_ refers to valid data on entry to the
line discipline's open() method. Rather, the ldisc is expected to
initialize that field for its own use for the lifetime of the instance
(ie. from open() to close() only).
[1]
[ 634.336761] ==================================================================
[ 634.338226] BUG: KASAN: use-after-free in x25_asy_open_tty+0x13d/0x490 at addr ffff8800a743efd0
[ 634.339558] Read of size 4 by task syzkaller_execu/8981
[ 634.340359] =============================================================================
[ 634.341598] BUG kmalloc-512 (Not tainted): kasan: bad access detected
...
[ 634.405018] Call Trace:
[ 634.405277] dump_stack (lib/dump_stack.c:52)
[ 634.405775] print_trailer (mm/slub.c:655)
[ 634.406361] object_err (mm/slub.c:662)
[ 634.406824] kasan_report_error (mm/kasan/report.c:138 mm/kasan/report.c:236)
[ 634.409581] __asan_report_load4_noabort (mm/kasan/report.c:279)
[ 634.411355] x25_asy_open_tty (drivers/net/wan/x25_asy.c:559 (discriminator 1))
[ 634.413997] tty_ldisc_open.isra.2 (drivers/tty/tty_ldisc.c:447)
[ 634.414549] tty_set_ldisc (drivers/tty/tty_ldisc.c:567)
[ 634.415057] tty_ioctl (drivers/tty/tty_io.c:2646 drivers/tty/tty_io.c:2879)
[ 634.423524] do_vfs_ioctl (fs/ioctl.c:43 fs/ioctl.c:607)
[ 634.427491] SyS_ioctl (fs/ioctl.c:622 fs/ioctl.c:613)
[ 634.427945] entry_SYSCALL_64_fastpath (arch/x86/entry/entry_64.S:188)
Reported-and-tested-by: Sasha Levin <sasha.levin@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit at least doubles the maximum value for
completion_nsec. This helps in special cases where one wants/needs to
emulate an extremely slow I/O (for example to spot bugs).
Signed-off-by: Paolo Valente <paolo.valente@unimore.it>
Signed-off-by: Arianna Avanzini <avanzini@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
In single-queue (block layer) mode,the function null_rq_prep_fn stops
the device if alloc_cmd fails. Then, once stopped, the device must be
restarted on the next command completion, so that the request(s) for
which alloc_cmd failed can be requeued. Otherwise the device hangs.
Unfortunately, device restart is currently performed only for delayed
completions, i.e., in irqmode==2. This fact causes hangs, for the
above reasons, with the other irqmodes in combination with single-queue
block layer.
This commits addresses this issue by making sure that, if stopped, the
device is properly restarted for all irqmodes on completions.
Signed-off-by: Paolo Valente <paolo.valente@unimore.it>
Signed-off-by: Arianna AVanzini <avanzini@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
For the Timer IRQ mode (i.e., when command completions are delayed),
there is one timer for each CPU. Each of these timers
. has a completion queue associated with it, containing all the
command completions to be executed when the timer fires;
. is set, and a new completion-to-execute is inserted into its
completion queue, every time the dispatch code for a new command
happens to be executed on the CPU related to the timer.
This implies that, if the dispatch of a new command happens to be
executed on a CPU whose timer has already been set, but has not yet
fired, then the timer is set again, to the completion time of the
newly arrived command. When the timer eventually fires, all its queued
completions are executed.
This way of handling delayed command completions entails the following
problem: if more than one command completion is inserted into the
queue of a timer before the timer fires, then the expiration time for
the timer is moved forward every time each of these completions is
enqueued. As a consequence, only the last completion enqueued enjoys a
correct execution time, while all previous completions are unjustly
delayed until the last completion is executed (and at that time they
are executed all together).
Specifically, if all the above completions are enqueued almost at the
same time, then the problem is negligible. On the opposite end, if
every completion is enqueued a while after the previous completion was
enqueued (in the extreme case, it is enqueued only right before the
timer would have expired), then every enqueued completion, except for
the last one, experiences an inflated delay, proportional to the number
of completions enqueued after it. In the end, commands, and thus I/O
requests, may be completed at an arbitrarily lower rate than the
desired one.
This commit addresses this issue by replacing per-CPU timers with
per-command timers, i.e., by associating an individual timer with each
command.
Signed-off-by: Paolo Valente <paolo.valente@unimore.it>
Signed-off-by: Arianna Avanzini <avanzini@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc
Pull remoteproc fixes from Ohad Ben-Cohen:
"Two one-liners coming from Suman and Arnd"
* tag 'remoteproc-4.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
remoteproc: fix memory leak of remoteproc ida cache layers
remoteproc: avoid stack overflow in debugfs file
|
|
When doing the initial setup both the hclk and the aclk need to be
enabled otherwise the board will simply hang. This only occurs when
building the vop driver as a module, when its built-in the initial setup
happens to run before the clock framework shuts of unused clocks
(including the aclk).
While there also switch to doing prepare and enable in one step rather
then separate steps to reduce the amount of code required.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Tested-by: Yakir Yang <ykk@rock-chips.com>
Tested-by: Romain Perier <romain.perier@gmail.com>
|
|
When building for SH7734:
drivers/pinctrl/sh-pfc/pfc-sh7734.c:586:1: error: macro "_GP_DATA" passed 5 arguments, but takes just 4
drivers/pinctrl/sh-pfc/pfc-sh7734.c:586:2: error: '_GP_DATA' undeclared here (not in a function)
drivers/pinctrl/sh-pfc/pfc-sh7734.c:586:1: error: macro "_GP_DATA" passed 5 arguments, but takes just 4
drivers/pinctrl/sh-pfc/pfc-sh7734.c:586:1: error: macro "_GP_DATA" passed 5 arguments, but takes just 4
...
drivers/pinctrl/sh-pfc/pfc-sh7734.c:2389:1: error: macro "_GP_INOUTSEL" passed 5 arguments, but takes just 4
drivers/pinctrl/sh-pfc/pfc-sh7734.c:2389:53: error: '_GP_INOUTSEL' undeclared here (not in a function)
drivers/pinctrl/sh-pfc/pfc-sh7734.c:2389:2: warning: initialization makes integer from pointer without a cast [enabled by default]
drivers/pinctrl/sh-pfc/pfc-sh7734.c:2389:2: warning: (near initialization for '(anonymous)[0]') [enabled by default]
...
drivers/pinctrl/sh-pfc/pfc-sh7734.c:2416:1: error: macro "_GP_INDT" passed 5 arguments, but takes just 4
drivers/pinctrl/sh-pfc/pfc-sh7734.c:2416:47: error: '_GP_INDT' undeclared here (not in a function)
drivers/pinctrl/sh-pfc/pfc-sh7734.c:2416:2: warning: initialization makes integer from pointer without a cast [enabled by default]
drivers/pinctrl/sh-pfc/pfc-sh7734.c:2416:2: warning: (near initialization for '(anonymous)[0]') [enabled by default]
...
Add the missing "cfg" macro parameters to the sh7734-specific
_GP_DATA(), _GP_INOUTSEL(), and _GP_INDT() macros to fix this.
Fixes: 22768fc60abbf58b ("pinctrl: sh-pfc: Add macros defining GP ports with config flags")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
We have relied upon the sole caller (wait_ioctl) validating the timeout
argument. However, when waiting for multiple requests I forgot to ensure
that the timeout was still positive on the later requests. This is more
simply done inside __i915_wait_request.
Fixes regression introduced in
commit b47161858ba13c9c7e03333132230d66e008dd55
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon Apr 27 13:41:17 2015 +0100
drm/i915: Implement inter-engine read-read optimisations
The impact of the regression is 1 jiffie for each extra active ring for
a wait_ioctl with a timeout -- I don't think anyone has noticed.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1448544702-5594-1-git-send-email-chris@chris-wilson.co.uk
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The mpt2sas driver was recently folded into mpt3sas to reduce code
duplication.
To avoid problems for people that only have CONFIG_SCSI_MPT2SAS in their
.config we introduce a dummy option that will select MPT3SAS if MPT2SAS
was previously enabled.
This is a temporary measure and we will deprecate this config option in
4.6.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: James Bottomley <James.Bottomley@hansenpartnership.com>
CC: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Avoid that kmemleak reports the following memory leak if a
SCSI LLD calls scsi_host_alloc() and scsi_host_put() but neither
scsi_host_add() nor scsi_host_remove(). The following shell
command triggers that scenario:
for ((i=0; i<2; i++)); do
srp_daemon -oac |
while read line; do
echo $line >/sys/class/infiniband_srp/srp-mlx4_0-1/add_target
done
done
unreferenced object 0xffff88021b24a220 (size 8):
comm "srp_daemon", pid 56421, jiffies 4295006762 (age 4240.750s)
hex dump (first 8 bytes):
68 6f 73 74 35 38 00 a5 host58..
backtrace:
[<ffffffff8151014a>] kmemleak_alloc+0x7a/0xc0
[<ffffffff81165c1e>] __kmalloc_track_caller+0xfe/0x160
[<ffffffff81260d2b>] kvasprintf+0x5b/0x90
[<ffffffff81260e2d>] kvasprintf_const+0x8d/0xb0
[<ffffffff81254b0c>] kobject_set_name_vargs+0x3c/0xa0
[<ffffffff81337e3c>] dev_set_name+0x3c/0x40
[<ffffffff81355757>] scsi_host_alloc+0x327/0x4b0
[<ffffffffa03edc8e>] srp_create_target+0x4e/0x8a0 [ib_srp]
[<ffffffff8133778b>] dev_attr_store+0x1b/0x20
[<ffffffff811f27fa>] sysfs_kf_write+0x4a/0x60
[<ffffffff811f1e8e>] kernfs_fop_write+0x14e/0x180
[<ffffffff81176eef>] __vfs_write+0x2f/0xf0
[<ffffffff811771e4>] vfs_write+0xa4/0x100
[<ffffffff81177c64>] SyS_write+0x54/0xc0
[<ffffffff8151b257>] entry_SYSCALL_64_fastpath+0x12/0x6f
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Avoid the sticky preferred mode bit by using the no-merge version of the
function (this allows gnome-shell to resize to lower resolutions than
the default resolution)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
for_each_available_child_of_node performs an of_node_get on each iteration,
so a break out of the loop requires an of_node_put.
The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@@
expression root,e;
local idexpression child;
@@
for_each_available_child_of_node(root, child) {
... when != of_node_put(child)
when != e = child
(
return child;
|
+ of_node_put(child);
? return ...;
)
...
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
|
Remove the "not" before "cannot".
I am fixing the comment block style while I am here.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Signed-off-by: Dmitry V. Krivenok <krivenok.dmitry@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
In order to check for overlapping reserved memory regions, we first need
to sort the array of memory regions. This is implemented using sort(),
and a custom comparison function __rmem_cmp().
Unfortunatley __rmem_cmp() doesn't work in all cases. Because the two
base values are phys_addr_t, they may be u64 on some platforms, in which
case subtracting one from the other and then (implicitly) casting to int
does not give us the -ve/0/+ve value we need.
This leads to incorrect reports about overlaps, eg:
ibm,slw-image@1ffe600000 (0x0000001ffe600000--0x0000001ffe700000) overlaps with
ibm,firmware-allocs-memory@1000000000 (0x0000001000000000--0x0000001000dc0200)
Fix it by just doing the standard double if and return 0 logic.
Fixes: ae1add247bf8 ("of: Check for overlap in reserved memory regions")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
When support for _FIT was added, the code presumed that the data
returned by the _FIT method is identical to the NFIT table, which
starts with an acpi_table_header. However, the _FIT is defined
to return a data in the format of a series of NFIT type structure
entries and as a method, has an acpi_object header rather tahn
an acpi_table_header.
To address the differences, explicitly save the acpi_table_header
from the NFIT, since it is accessible through /sys, and change
the nfit pointer in the acpi_desc structure to point to the
table entries rather than the headers.
Reported-by: Jeff Moyer (jmoyer@redhat.com>
Signed-off-by: Linda Knippers <linda.knippers@hpe.com>
Acked-by: Vishal Verma <vishal.l.verma@intel.com>
[vishal: fix up unit test for new header assumptions]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Missed previously due to a lack of test coverage on a platform that
provided an valid response to _FIT.
Signed-off-by: Linda Knippers <linda.knippers@hpe.com>
Acked-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The size of NFIT tables don't necessarily match the size of the
data structures that we use for them. For example, the NVDIMM
Control Region Structure table is shorter for a device with
no block control windows than for a device with block control windows.
Other tables, such as Flush Hint Address Structure and the Interleave
Structure are variable length by definition.
Account for the size difference when comparing table entries by
using the actual table size from the table header if it's less
than the structure size.
Signed-off-by: Linda Knippers <linda.knippers@hpe.com>
Acked-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://anongit.freedesktop.org/drm-intel into drm-fixes
few i915 fixes.
* tag 'drm-intel-fixes-2015-11-30' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Don't override output type for DDI HDMI
drm/i915: Don't compare has_drrs strictly in pipe config
drm/i915: Mark uneven memory banks on gen4 desktop as unknown swizzling
|
|
Hi,
For a brief moment I was tricked into thinking that:
In-kernel debugger (EXPERIMENTAL) (ACPI_DEBUGGER) [N/y/?] (NEW)
might be something useful. Better describe the feature to reduce
such confusion.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
