summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2015-09-21usb: xhci: Clear XHCI_STATE_DYING on startRoger Quadros
For whatever reason if XHCI died in the previous instant then it will never recover on the next xhci_start unless we clear the DYING flag. Cc: <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21usb: xhci: lock mutex on xhci_stopRoger Quadros
Else it races with xhci_setup_device Cc: <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21xhci: Move xhci_pme_quirk() behind #ifdef CONFIG_PMTomer Barletz
xhci_pme_quirk() is only used when CONFIG_PM is defined. Compiling a kernel without PM complains about this function [reworded commit message -Mathias] Cc: <stable@vger.kernel.org> Signed-off-by: Tomer Barletz <barletz@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21xhci: give command abortion one more chance before killing xhciMathias Nyman
We want to give the command abortion an additional try to stop the command ring before we completely hose xhci. Cc: <stable@vger.kernel.org> Tested-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21usb: Use the USB_SS_MULT() macro to get the burst multiplier.Mathias Nyman
Bits 1:0 of the bmAttributes are used for the burst multiplier. The rest of the bits used to be reserved (zero), but USB3.1 takes bit 7 into use. Use the existing USB_SS_MULT() macro instead to make sure the mult value and hence max packet calculations are correct for USB3.1 devices. Note that burst multiplier in bmAttributes is zero based and that the USB_SS_MULT() macro adds one. Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21Merge tag 'fixes-for-v4.3-rc3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.3-rc3 Here's the second pull request for current -rc cycle. A few fixes on dummy_hcd which have been around for longer than they should be. MUSB got a couple fixes, the most important of which is a fix to DMA channel teardown on AM335x devices. And DWC3 got a minor fix for when using RT-enabled kernels.
2015-09-21sunvnet: Invoke SET_NETDEV_DEV() to set up the vdev in vnet_new()Sowmini Varadhan
`ls /sys/devices/channel-devices/vnet-port-0-0/net' is missing without this change, and applications like NetworkManager are looking in sysfs for the information. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21geneve: remove vlan-related feature assignmentJohn W. Linville
The code handling vlan tag insertion was dropped in commit 371bd1061d29 ("geneve: Consolidate Geneve functionality in single module."). Now we need to drop the related vlan feature bits in the netdev structure. Signed-off-by: John W. Linville <linville@tuxdriver.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21usbnet: New driver for QinHeng CH9200 devicesMatthew Garrett
There's a bunch of cheap USB 10/100 devices based on QinHeng chipsets. The vendor driver supports the CH9100 and CH9200 devices, but the majority of the code is of the if (ch9100) {} else {} form, with the most significant difference being that CH9200 provides a real MII interface but CH9100 fakes one with a bunch of global variables and magic commands. I don't have a CH9100, so it's probably better if someone who does provides an independent driver for it. In any case, this is a lightly cleaned up version of the vendor driver with all the CH9100 code dropped. Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21net: phy: mdio-gpio: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21net: phy: mdio-bcm-unimac: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21net: moxa: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21net: gianfar_ptp: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21net: bcmgenet: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis@osg.samsung.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21net: systemport: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21net: arc: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21Merge remote-tracking branches 'regulator/fix/anatop', 'regulator/fix/gpio', ↵Mark Brown
'regulator/fix/pbias', 'regulator/fix/tpx65218' and 'regulator/fix/vexpress' into regulator-linus
2015-09-21Merge remote-tracking branch 'regulator/fix/core' into regulator-linusMark Brown
2015-09-21usb: dwc3: gadget: Fix BUG in RT configRoger Quadros
Using spin_lock() in hard irq handler is pointless and causes a BUG() in RT (real-time) configuration so get rid of it. The reason it's pointless is because the driver is basically accessing register which is, anyways, atomic. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: musb: fix cppi channel teardown for isoch transferBin Liu
After a few iterations of start/stop UVC camera streaming, the streaming stops. This patch adds 250us delay in the cppi channel abort path to let cppi drain properly. Using 50us delay seems to be too aggressive, some webcams are still broken. 250us is the original value used in TI 3.2 kernel. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: phy: isp1301: Export I2C module alias informationJavier Martinez Canillas
The I2C core always reports the MODALIAS uevent as "i2c:<client name" regardless if the device was registered using OF or platform code so So the driver needs to export the I2C table and this be built into the module or udev won't have the necessary information to auto load the module when the device is added. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: gadget: drop null test before destroy functionsJulia Lawall
Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: gadget: dummy_hcd: in transfer(), return data sent, not limitIgor Kotrasinski
dummy_timer uses transfer() to update transfer limit. However, limit passed to dummy_timer changes depending on transfer type, so the actual limit is overwritten. This can cause unpredictably slow / fast bulk transfers when coupled with control / interrupt transfers. Fix by returning actual amount of data sent in transfer() and substracting from total. Signed-off-by: Igor Kotrasinski <i.kotrasinsk@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: gadget: dummy_hcd: fix rescan logic for transferIgor Kotrasinski
transfer() schedules a rescan for transfers larger than maxpacket, which is wrong for transfers that are multiples of maxpacket. Rewrite to fix and clarify packet multiple / remainder transfer logic. Signed-off-by: Igor Kotrasinski <i.kotrasinsk@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: gadget: dummy_hcd: fix unneeded else-if conditionIgor Kotrasinski
We already know at this point that to_host is false. Signed-off-by: Igor Kotrasinski <i.kotrasinsk@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: gadget: dummy_hcd: emulate sending zlp in packet logicIgor Kotrasinski
currently, when a zlp flag is set and an urb/usb_request buffer is filled without a short packet, transfer() leaves its status at -EINPROGRESS and does not rescan for short packet. In a scenario where ep.maxpacket bytes are copied, URB_ZERO_PACKET is set, urb buffer is filled and usb_request buffer is not, transfer() returns with an urb with -EINPROGRESS status, which dummy_hcd treats as incomplete transfer. Check for zlp and rescan appropriately. Signed-off-by: Igor Kotrasinski <i.kotrasinsk@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: musb: dsps: fix polling in device-only modeBin Liu
Fix the regression caused by commit ad78c918602 ("usb: musb: dsps: just start polling already") which causes polling the ID pin status even in device-only mode. Fixes: ad78c918602c ("usb: musb: dsps: just start polling already") Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: gadget: atmel_usba_udc: add ep capabilities support on device tree bindingSylvain Rochet
The recently added endpoint capabilities flags verification breaks Atmel USBA because the endpoint configuration was only added when the driver is bound using the legacy pdata interface. Convert endpoint configuration to new capabilities model when driver is bound to a device tree as well. Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Fixes: 47bef3865115 ("usb: gadget: atmel_usba_udc: add ep capabilities support") Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21Merge tag 'renesas-sh-drivers-for-v4.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas Pull SH drivers updates from Simon Horman: "I am sending this change after v4.3-rc1 has been released as it depends on SoC changes which are present in that rc release. Summary: - disable PM runtime for multi-platform ARM with genpd - disable legacy default PM Domain on emev2" * tag 'renesas-sh-drivers-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: drivers: sh: Disable PM runtime for multi-platform ARM with genpd drivers: sh: Disable legacy default PM Domain on emev2
2015-09-21Input: uinput - fix crash when using ABS eventsDmitry Torokhov
Commit b6d30968d86c45a7bb599eaca13ff048d3fa576c (Input: uinput - switch to using for_each_set_bit()) switched driver to use for_each_set_bit(). However during initial write of the uinput structure that contains min/max data for all possible axes none of them are reflected in dev->absbit yet and so we were skipping over all of them and were not allocating absinfo memory which caused crash later when driver tried to sens EV_ABS events: <1>[ 15.064330] BUG: unable to handle kernel NULL pointer dereference at 0000000000000024 <1>[ 15.064336] IP: [<ffffffff8163f142>] input_handle_event+0x232/0x4e0 <4>[ 15.064343] PGD 0 <4>[ 15.064345] Oops: 0000 [#1] SMP Fixes: b6d30968d86c45a7bb599eaca13ff048d3fa576c Cc: stable@vger.kernel.org Reported-by: Stephen Chandler Paul <cpaul@redhat.com> Tested-by: Stephen Chandler Paul <cpaul@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-21Input: elan_i2c - expand maximum product_id form 0xFF to 0xFFFFDuson Lin
In order to support more projects in the future, we expand the maximum product_id value form 0xFF to 0xFFFF. Signed-off by: Duson Lin <dusonlin@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-21Input: elan_i2c - add ic type 0x03Duson Lin
The 0x03 is valid 3000 serial ic type too. Signed-off-by: Duson Lin <dusonlin@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-21Input: elan_i2c - don't require known iap versionDaniel Drake
The Asus X456UA has an ELAN1000 touchpad with IAP version 0xe. This is unknown to elan_get_fwinfo() so driver probe fails and I am left with an unusable touchpad. However, the fwinfo is not required for general driver usage, it is only needed if the user decides to upload new firmware. Adjust the driver so that we do not abort probe when we encounter unexpected IAP version, but rather warn user that firmware update feature of the driver will not work. Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-21hwrng: xgene - fix handling platform_get_irqAndrzej Hajda
The function can return negative value. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-21crypto: qat - VF should never trigger SBR on PHConor McLoughlin
Don't allow to trigger SBR from a VF running in VMM context. Cc: stable@vger.kernel.org Signed-off-by: Conor McLoughlin <conor.mcloughlin@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-21crypto: marvell - properly handle CRYPTO_TFM_REQ_MAY_BACKLOG-flagged requestsThomas Petazzoni
The mv_cesa_queue_req() function calls crypto_enqueue_request() to enqueue a request. In the normal case (i.e the queue isn't full), this function returns -EINPROGRESS. The current Marvell CESA crypto driver takes this into account and cleans up the request only if an error occured, i.e if the return value is not -EINPROGRESS. Unfortunately this causes problems with CRYPTO_TFM_REQ_MAY_BACKLOG-flagged requests. When such a request is passed to crypto_enqueue_request() and the queue is full, crypto_enqueue_request() will return -EBUSY, but will keep the request enqueued nonetheless. This situation was not properly handled by the Marvell CESA driver, which was anyway cleaning up the request in such a situation. When later on the request was taken out of the backlog and actually processed, a kernel crash occured due to the internal driver data structures for this structure having been cleaned up. To avoid this situation, this commit adds a mv_cesa_req_needs_cleanup() helper function which indicates if the request needs to be cleaned up or not after a call to crypto_enqueue_request(). This helper allows to do the cleanup only in the appropriate cases, and all call sites of mv_cesa_queue_req() are fixed to use this new helper function. Reported-by: Vincent Donnefort <vdonnefort@gmail.com> Fixes: db509a45339fd ("crypto: marvell/cesa - add TDMA support") Cc: <stable@vger.kernel.org> # v4.2+ Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-21drm/i915: fix kernel-doc warnings in intel_audio.cGeliang Tang
Fix the following 'make htmldocs' warnings: .//drivers/gpu/drm/i915/intel_audio.c:439: warning: No description found for parameter 'intel_encoder' .//drivers/gpu/drm/i915/intel_audio.c:439: warning: Excess function parameter 'encoder' description in 'intel_audio_codec_disable' .//drivers/gpu/drm/i915/intel_audio.c:439: warning: No description found for parameter 'intel_encoder' .//drivers/gpu/drm/i915/intel_audio.c:439: warning: Excess function parameter 'encoder' description in 'intel_audio_codec_disable' Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-09-21extcon: Fix attached value returned by is_extcon_changedHans de Goede
is_extcon_changed should only check the idx-th bit of new, not the entirety of new when setting attached. This fixes extcon sending notifications that a cable was inserted when it gets removed while another cable is still connected. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-20Drivers: hv: vmbus: fix init_vp_index() for reloading hv_netvscDexuan Cui
This fixes the recent commit 3b71107d73b16074afa7658f3f0fcf837aabfe24: Drivers: hv: vmbus: Further improve CPU affiliation logic Without the fix, reloading hv_netvsc hangs the guest. Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-20mei: fix debugfs files leak on error pathTomas Winkler
if dbgfs_dir is not set then debugfs_remove_recursive is not called on the error path Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-20macvtap: fix TUNSETSNDBUF values > 64kMichael S. Tsirkin
Upon TUNSETSNDBUF, macvtap reads the requested sndbuf size into a local variable u. commit 39ec7de7092b ("macvtap: fix uninitialized access on TUNSETIFF") changed its type to u16 (which is the right thing to do for all other macvtap ioctls), breaking all values > 64k. The value of TUNSETSNDBUF is actually a signed 32 bit integer, so the right thing to do is to read it into an int. Cc: David S. Miller <davem@davemloft.net> Fixes: 39ec7de7092b ("macvtap: fix uninitialized access on TUNSETIFF") Reported-by: Mark A. Peloquin Bisected-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-20Revert "net/phy: Add Vitesse 8641 phy ID"Kevin Hao
This reverts commit 1298267b548a78840bd4b3e030993ff8747ca5e6. That commit claim that the Vitesse VSC8641 is compatible with Vitesse 82xx. But this is not true. It seems that all the registers used in Vitesse phy driver are not compatible between 8641 and 82xx. It does cause malfunction of the Ethernet on p1010rdb-pa board. So we definitely need a rework in order to support the 8641 phy in this driver. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-208139cp: Call __cp_set_rx_mode() from cp_tx_timeout()David Woodhouse
Unless we reset the RX config, on real hardware I don't seem to receive any packets after a TX timeout. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-208139cp: Use dev_kfree_skb_any() instead of dev_kfree_skb() in cp_clean_rings()David Woodhouse
This can be called from cp_tx_timeout() with interrupts disabled. Spotted by Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-20bna: check for dma mapping errorsIvan Vecera
Check for DMA mapping errors, recover from them and register them in ethtool stats like other errors. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-20hwmon: (pwm-fan) Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-09-20hwmon: (gpio-fan) Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-09-20hwmon: (abx500) Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-09-20thunderbolt: Allow loading of module on recent Apple MacBooks with ↵Knuth Posern
thunderbolt 2 controller The pci device ids listed in the thunderbolt driver are to restrictive, which prevents the driver from being loaded on recent Apple MacBooks using a thunderbolt 2 controller. In particular this prevented any hot-plugging functionality for thunderbolt based ethernet dongles (i.e. Apples thunderbolt gigabit ethernet broadcom tg3 based dongle Model A1433 EMC 2590). Changing the subvendor and subdevice to PCI_ANY_ID the thunderbolt driver loads and binds to the pci device 07:00.0 System peripheral: Intel Corporation Device 156c which is the thunderbolt 2 controller on the MacBookPro12,1. Successfully tested on MacBookPro12,1. With the patch the thunderbolt module gets now loaded on boot. And it provides hot-plugging support both for a cold-plugged and a warm-plugged ethernet dongle. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Acked-by: Knuth Posern <knuth@posern.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-20thermal: power_allocator: exit early if there are no cooling devicesJavi Merino
Don't waste cycles in the power allocator governor's throttle function if there are no cooling devices and exit early. This commit doesn't change any functionality, but should provide better performance for the odd case of a thermal zone with trip points but without cooling devices. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-30 19:17:37 +0000