| Age | Commit message (Collapse) | Author |
|---|
|
git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"A couple of minor fixes for 4.11:
- array bound fix for __get_unmap_pool()
- cyclic period splitting for bcm2835"
* tag 'dmaengine-fix-4.11-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: Fix array index out of bounds warning in __get_unmap_pool()
dmaengine: bcm2835: Fix cyclic DMA period splitting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"This update provides:
- make the scheduler clock switch to unstable mode smooth so the
timestamps stay at microseconds granularity instead of switching to
tick granularity.
- unbreak perf test tsc by taking the new offset into account which
was added in order to proveide better sched clock continuity
- switching sched clock to unstable mode runs all clock related
computations which affect the sched clock output itself from a work
queue. In case of preemption sched clock uses half updated data and
provides wrong timestamps. Keep the math in the protected context
and delegate only the static key switch to workqueue context.
- remove a duplicate header include"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/headers: Remove duplicate #include <linux/sched/debug.h> line
sched/clock: Fix broken stable to unstable transfer
sched/clock, x86/perf: Fix "perf test tsc"
sched/clock: Fix clear_sched_clock_stable() preempt wobbly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fix from Thomas Gleixner:
"Downgrade the missing ESRT header printk to warning level and remove a
useless error printk which just generates noise for no value"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/esrt: Cleanup bad memory map log messages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two small fixes for the new CLKEVT_OF infrastructure"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vmlinux.lds: Add __clkevt_of_table to kernel
clockevents: Fix syntax error in clkevt-of macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Two small fixlets:
- select a required Kconfig to make the MVEBU driver compile
- add the missing MIPS local GIC interrupts which prevent drivers to
probe successfully"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips-gic: Fix Local compare interrupt
irqchip/mvebu-odmi: Select GENERIC_MSI_IRQ_DOMAIN
|
|
When system bootup without get sensor property, set sensor
property will be fail.
If no get_feature operation done before set_feature, the sensor
properties will all be the initialized value, which is not the
same with sensor real properties. When set sensor property it will
write back to sensor the changed perperty data combines with other
sensor properties data, it is not right and may be dangerous.
In order to get all sensor properties, choose to read one of the sensor
properties(no matter read any sensor peroperty, driver will get all
the peroperties and return the requested one).
Fixes: 73c6768b710a ("iio: hid-sensors: Common attribute and trigger")
Signed-off-by: Song Hongyan <hongyan.song@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
When both accel_3d and gravity sensor are present, iio_device_register()
fails with "Duplicate scan index" error.
The reason for this is setting of indio_dev->num_channels based on
accel_3d channel for both gravity and accel-3d sensor. But number of
channels are not same, so for gravity it is pointing to some invalid
memory and getting scan_index to compare which may match.
To fix this issue, set the indio_dev->num_channels correctly based on
the sensor type.
Fixes: 0e377f3b9ae9 ('iio: Add gravity sensor support')
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Fix formatting of negative values of type IIO_VAL_FRACTIONAL_LOG2 by
switching from do_div(), which can't handle negative numbers, to
div_s64_rem(). Also use shift_right for shifting, which is safe with
negative values.
Signed-off-by: Nikolaus Schulz <nikolaus.schulz@avionic-design.de>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
This patch initializes the bootime in struct st_sensor_settings for
lps22hb sensor. Without this, sensor channels read from sysfs always
report stale values.
Signed-off-by: Shrirang Bagul <shrirang.bagul@canonical.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
We need to do arithmetics after byte swapping, not before.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
The length field in the Write Zeroes command is a 16-bit field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
In this case entirely harmless as it's all-ones, but still nice to
shut up sparse.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
Fixes: b35ba01e ("nvme: support ranged discard requests")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Thirteen small fixes: The hopefully final effort to get the lpfc nvme
kconfig problems sorted, there's one important sg fix (user can induce
read after end of buffer) and one minor enhancement (adding an extra
PCI ID to qedi). The rest are a set of minor fixes, which mostly occur
as user visible in error legs or on specific devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: remove the duplicated checking for supporting clkscaling
scsi: lpfc: fix building without debugfs support
scsi: lpfc: Fix PT2PT PRLI reject
scsi: hpsa: fix volume offline state
scsi: libsas: fix ata xfer length
scsi: scsi_dh_alua: Warn if the first argument of alua_rtpg_queue() is NULL
scsi: scsi_dh_alua: Ensure that alua_activate() calls the completion function
scsi: scsi_dh_alua: Check scsi_device_get() return value
scsi: sg: check length passed to SG_NEXT_CMD_LEN
scsi: ufshcd-platform: remove the useless cast in ERR_PTR/IS_ERR
scsi: qedi: Add PCI device-ID for QL41xxx adapters.
scsi: aacraid: Fix potential null access
scsi: qla2xxx: Fix crash in qla2xxx_eh_abort on bad ptr
|
|
Merge misc fixes from Andrew Morton:
"11 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kasan: do not sanitize kexec purgatory
drivers/rapidio/devices/tsi721.c: make module parameter variable name unique
mm/hugetlb.c: don't call region_abort if region_chg fails
kasan: report only the first error by default
hugetlbfs: initialize shared policy as part of inode allocation
mm: fix section name for .data..ro_after_init
mm, hugetlb: use pte_present() instead of pmd_present() in follow_huge_pmd()
mm: workingset: fix premature shadow node shrinking with cgroups
mm: rmap: fix huge file mmap accounting in the memcg stats
mm: move mm_percpu_wq initialization earlier
mm: migrate: fix remove_migration_pte() for ksm pages
|
|
Without this the generic cdc_ether grabs the device,
and does not really work.
Signed-off-by: René Rebe <rene@exactcode.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This driver uses interfaces from linux/of.h and linux/property.h but
relies on implict inclusion of those headers which means that changes in
other headers could break the build, as happened in -next for arm today.
Add a explicit includes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current code only supports DT to check SFP present.
This patch adds ACPI support as well.
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 4.11-rc5.
The usual xhci fixes are here, as well as a fix for yet-another-bug-
found-by-KASAN, those developers are doing great stuff here.
And there's a phy build warning fix that showed up in 4.11-rc1.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: phy: isp1301: Fix build warning when CONFIG_OF is disabled
xhci: Manually give back cancelled URB if we can't queue it for cancel
xhci: Set URB actual length for stopped control transfers
xhci: plat: Register shutdown for xhci_plat
USB: fix linked-list corruption in rh_call_control()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small fixes for some serial drivers and Kconfig help
text for 4.11-rc5. Nothing major here at all, a few things resolving
reported bugs in some random serial drivers.
I don't think these made the last linux-next due to me getting to them
yesterday, but I am not sure, they might have snuck in. The patches
only affect drivers that the maintainers of sent me these patches for,
so we should be safe here :)"
* tag 'tty-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: pl011: fix earlycon work-around for QDF2400 erratum 44
serial: 8250_EXAR: fix duplicate Kconfig text and add missing help text
tty/serial: atmel: fix TX path in atmel_console_write()
tty/serial: atmel: fix race condition (TX+DMA)
serial: mxs-auart: Fix baudrate calculation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix two issues related to IOAPIC hotplug, an overzealous build
optimization that prevents the function graph tracer from working with
the ACPI subsystem correctly and an RCU synchronization issue in the
ACPI APEI code.
Specifics:
- drop the unconditional setting of the '-Os' gcc flag from the ACPI
Makefile to make the function graph tracer work correctly with the
ACPI subsystem (Josh Poimboeuf).
- add missing synchronize_rcu() to ghes_remove() which removes an
element from an RCU-protected list, but fails to synchronize it
properly afterward (James Morse).
- fix two problems related to IOAPIC hotplug, a local variable
initialization in setup_res() and the creation of platform device
objects for IO(x)APICs which are (a) unused and (b) leaked on
hot-removal (Joerg Roedel)"
* tag 'acpi-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Fix incompatibility with mcount-based function graph tracing
ACPI / APEI: Add missing synchronize_rcu() on NOTIFY_SCI removal
ACPI: Do not create a platform_device for IOAPIC/IOxAPIC
ACPI: ioapic: Clear on-stack resource before using it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a cpufreq core issue with the initialization of the cpufreq
sysfs interface and a cpuidle powernv driver initialization issue.
Specifics:
- symbolic links from CPU directories to the corresponding cpufreq
policy directories in sysfs are not created during initialization
in some cases which confuses user space, so prevent that from
happening (Rafael Wysocki).
- the powernv cpuidle driver fails to pass a correct cpumaks to the
cpuidle core in some cases which causes subsequent failures to
occur, so fix it (Vaidyanathan Srinivasan)"
* tag 'pm-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: powernv: Pass correct drv->cpumask for registration
cpufreq: Fix creation of symbolic links to policy directories
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two bugfixes from I2C, specifically the I2C mux section. Thanks to
peda for collecting them"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mux: pca954x: Add missing pca9546 definition to chip_desc
Revert "i2c: mux: pca954x: Add ACPI support for pca954x"
|
|
Add basic thermal driver for bcm2835 SoC.
This driver currently make sure that tsense HW block is set up
correctly.
Tested-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
The work-around for the Qualcomm Datacenter Technologies QDF2400
erratum 44 sets the "qdf2400_e44_present" global variable if the
work-around is needed. However, this check does not happen until after
earlycon is initialized, which means the work-around is not
used, and the console hangs as soon as it displays one character.
Fixes: d8a4995bcea1 ("tty: pl011: Work around QDF2400 E44 stuck BUSY bit")
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
kbuild test robot reported a non-static variable name collision between
a staging driver and a RapidIO driver, with a generic variable name of
'dbg_level'.
Both drivers should be changed so that they don't use this generic
public variable name. This patch fixes the RapidIO driver but does not
change the user interface (name) for the module parameter.
drivers/staging/built-in.o:(.bss+0x109d0): multiple definition of `dbg_level'
drivers/rapidio/built-in.o:(.bss+0x16c): first defined here
Link: http://lkml.kernel.org/r/ab527fc5-aa3c-4b07-5d48-eef5de703192@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit c2a6bbaf0c5f (ACPI / scan: Prefer devices without _HID/_CID
for _ADR matching) added a list_empty(&adev->pnp.ids) check to
find_child_checks() so as to catch situations in which the ACPI
core attempts to decode _ADR for a device having a _HID too which
is strictly against the spec. However, it overlooked the fact that
the adev->pnp.ids list for the devices taken into account by
find_child_checks() may contain device IDs set internally by the
kernel, like "LNXVIDEO" (thanks to Zhang Rui for that realization),
and it broke the enumeration of those devices as a result.
To unbreak it, replace the overly coarse grained list_empty()
check with a much more precise check against the pnp.type.platform_id
flag which is only set for devices having a _HID (that's how it
should be done from the start, as having both _ADR and _CID is
actually permitted).
Fixes: c2a6bbaf0c5f (ACPI / scan: Prefer devices without _HID/_CID for _ADR matching)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=194889
Reported-and-tested-by: Mike <mike@mikewilson.me.uk>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* pm-cpufreq-fixes:
cpufreq: Fix creation of symbolic links to policy directories
* pm-cpuidle-fixes:
cpuidle: powernv: Pass correct drv->cpumask for registration
|
|
* acpi-hotplug-fixes:
ACPI: Do not create a platform_device for IOAPIC/IOxAPIC
ACPI: ioapic: Clear on-stack resource before using it
* acpi-build-fixes:
ACPI: Fix incompatibility with mcount-based function graph tracing
* acpi-apei-fixes:
ACPI / APEI: Add missing synchronize_rcu() on NOTIFY_SCI removal
|
|
Buffers read through dm_bufio_read() were not released in all code paths.
Fixes: a739ff3f543a ("dm verity: add support for forward error correction")
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- memory corruption when kmalloc fails in xts/lrw
- mark some CCP DMA channels as private
- fix reordering race in padata
- regression in omap-rng DT description"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: xts,lrw - fix out-of-bounds write after kmalloc failure
crypto: ccp - Make some CCP DMA channels private
padata: avoid race in reordering
dt-bindings: rng: clocks property on omap_rng not always mandatory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"Here are a couple of mmc fixes intended for v4.11 rc5.
MMC host:
- sdhci: Fix bug when using SDIO IRQ
- sdhci-of-at91: Fix eMMC DDR52 card detection"
* tag 'mmc-v4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-of-at91: fix MMC_DDR_52 timing selection
mmc: sdhci: Disable runtime pm when the sdio_irq is enabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
- Wacom regression fixes, from Aaron Armstrong Skomra
- new device ID addition by Peter Stein
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: wacom: call _query_tablet_data() for BAMBOO_TOUCH
HID: wacom: Don't add ghost interface as shared data
HID: xinmo: fix for out of range for THT 2P arcade controller.
|
|
git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Seems to be quietening down, which means someone will make a liar of
me for rc6.
Just one vc4, one etnvaiv, one radeon, and a few i915 GVT fixes, and
one i915 normal fixes"
* tag 'drm-fixes-for-v4.11-rc5' of git://people.freedesktop.org/~airlied/linux:
drm/vc4: Allocate the right amount of space for boot-time CRTC state.
drm/etnaviv: (re-)protect fence allocation with GPU mutex
drm/radeon: Override fpfn for all VRAM placements in radeon_evict_flags
drm/i915: Restore marking context objects as dirty on pinning
drm/i915/gvt: Use force single submit flag to distinguish gvt request from i915 request
drm/i915/gvt: set shadow entry to scratch page while p2m failed
drm/i915/gvt: Fix guest fail to read EDID leading to black guest console issue.
drm/i915/gvt: fix wrong offset when loading RCS mocs
drm/i915/gvt: add write handler for mmio mbctl
drm/i915/kvmgt: Hold struct kvm reference
|
|
In commit d0aeaa83f0b0f7a92615bbdd6b1f96812f7dcfd2 ("serial: exar:
split out the exar code from 8250_pci") the exar driver got its own
Kconfig. However the text for the new option was never changed from
the original 8250_PCI text, and hence it appears confusing when you
get asked the same question twice:
8250/16550 PCI device support (SERIAL_8250_PCI) [Y/n/m/?] (NEW)
8250/16550 PCI device support (SERIAL_8250_EXAR) [Y/n/m] (NEW)
Adding to the confusion, is that there is no help text for this new
option to indicate it is specific to a certain family of cards.
Fix both issues at the same time, as well as the space vs. tab issues
introduced in the same commit.
Fixes: d0aeaa83f0b0 ("serial: exar: split out the exar code from 8250_pci")
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-serial@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A side effect of 89d8232411a8 ("tty/serial: atmel_serial: BUG: stop DMA
from transmitting in stop_tx") is that the console can be called with
TX path disabled. Then the system would hang trying to push charecters
out in atmel_console_putchar().
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes: 89d8232411a8 ("tty/serial: atmel_serial: BUG: stop DMA from transmitting
in stop_tx")
Cc: stable <stable@vger.kernel.org> #4.4+
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If uart_flush_buffer() is called between atmel_tx_dma() and
atmel_complete_tx_dma(), the circular buffer has been cleared, but not
atmel_port->tx_len.
That leads to a circular buffer overflow (dumping (UART_XMIT_SIZE -
atmel_port->tx_len) bytes).
Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Cc: stable <stable@vger.kernel.org> # 3.12+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The reference manual for the i.MX28 recommends to calculate the divisor
as
divisor = (UARTCLK * 32) / baud rate, rounded to the nearest integer
, so let's do this. For a typical setup of UARTCLK = 24 MHz and baud
rate = 115200 this changes the divisor from 6666 to 6667 and so the
actual baud rate improves from 115211.521 Bd (error ≅ 0.01 %) to
115194.240 Bd (error ≅ 0.005 %).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 4257e08 ("dm raid: support to change bitmap region size")
introduced a bitmap resize call during preresume phase. User can create
a DM device with "raid" target configured as raid1 with no metadata
devices to hold superblock/bitmap info. It can be achieved using the
following sequence:
truncate -s 32M /dev/shm/raid-test
LOOP=$(losetup --show -f /dev/shm/raid-test)
dmsetup create raid-test-linear0 --table "0 1024 linear $LOOP 0"
dmsetup create raid-test-linear1 --table "0 1024 linear $LOOP 1024"
dmsetup create raid-test --table "0 1024 raid raid1 1 2048 2 - /dev/mapper/raid-test-linear0 - /dev/mapper/raid-test-linear1"
This results in the following crash:
[ 4029.110216] device-mapper: raid: Ignoring chunk size parameter for RAID 1
[ 4029.110217] device-mapper: raid: Choosing default region size of 4MiB
[ 4029.111349] md/raid1:mdX: active with 2 out of 2 mirrors
[ 4029.114770] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
[ 4029.114802] IP: bitmap_resize+0x25/0x7c0 [md_mod]
[ 4029.114816] PGD 0
…
[ 4029.115059] Hardware name: Aquarius Pro P30 S85 BUY-866/B85M-E, BIOS 2304 05/25/2015
[ 4029.115079] task: ffff88015cc29a80 task.stack: ffffc90001a5c000
[ 4029.115097] RIP: 0010:bitmap_resize+0x25/0x7c0 [md_mod]
[ 4029.115112] RSP: 0018:ffffc90001a5fb68 EFLAGS: 00010246
[ 4029.115127] RAX: 0000000000000005 RBX: 0000000000000000 RCX: 0000000000000000
[ 4029.115146] RDX: 0000000000000000 RSI: 0000000000000400 RDI: 0000000000000000
[ 4029.115166] RBP: ffffc90001a5fc28 R08: 0000000800000000 R09: 00000008ffffffff
[ 4029.115185] R10: ffffea0005661600 R11: ffff88015cc29a80 R12: ffff88021231f058
[ 4029.115204] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 4029.115223] FS: 00007fe73a6b4740(0000) GS:ffff88021ea80000(0000) knlGS:0000000000000000
[ 4029.115245] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4029.115261] CR2: 0000000000000030 CR3: 0000000159a74000 CR4: 00000000001426e0
[ 4029.115281] Call Trace:
[ 4029.115291] ? raid_iterate_devices+0x63/0x80 [dm_raid]
[ 4029.115309] ? dm_table_all_devices_attribute.isra.23+0x41/0x70 [dm_mod]
[ 4029.115329] ? dm_table_set_restrictions+0x225/0x2d0 [dm_mod]
[ 4029.115346] raid_preresume+0x81/0x2e0 [dm_raid]
[ 4029.115361] dm_table_resume_targets+0x47/0xe0 [dm_mod]
[ 4029.115378] dm_resume+0xa8/0xd0 [dm_mod]
[ 4029.115391] dev_suspend+0x123/0x250 [dm_mod]
[ 4029.115405] ? table_load+0x350/0x350 [dm_mod]
[ 4029.115419] ctl_ioctl+0x1c2/0x490 [dm_mod]
[ 4029.115433] dm_ctl_ioctl+0xe/0x20 [dm_mod]
[ 4029.115447] do_vfs_ioctl+0x8d/0x5a0
[ 4029.115459] ? ____fput+0x9/0x10
[ 4029.115470] ? task_work_run+0x79/0xa0
[ 4029.115481] SyS_ioctl+0x3c/0x70
[ 4029.115493] entry_SYSCALL_64_fastpath+0x13/0x94
The raid_preresume() function incorrectly assumes that the raid_set has
a bitmap enabled if RT_FLAG_RS_BITMAP_LOADED is set. But
RT_FLAG_RS_BITMAP_LOADED is getting set in __load_dirty_region_bitmap()
even if there is no bitmap present (and bitmap_load() happily returns 0
even if a bitmap isn't present). So the only way forward in the
near-term is to check if the bitmap is present by seeing if
mddev->bitmap is not NULL after bitmap_load() has been called.
By doing so the above NULL pointer is avoided.
Fixes: 4257e08 ("dm raid: support to change bitmap region size")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Dmitry Bilunov <kmeaw@yandex-team.ru>
Signed-off-by: Andrey Smetanin <asmetanin@yandex-team.ru>
Acked-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier
- Fix mvebu-odmi dependency selection
- Fix mips-gic virtual/hw mapping
|
|
Commit 4cfffcfa5106 ("irqchip/mips-gic: Fix local interrupts") added
mapping of several local interrupts during initialisation of the gic
driver. This associates virq numbers with these interrupts.
Unfortunately, as not all of the interrupts are mapped in hardware
order, when drivers subsequently request these interrupts they conflict
with the mappings that have already been set up. For example, this
manifests itself in the gic clocksource driver, which fails to probe
with the message:
clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0x7350c9738,
max_idle_ns: 440795203769 ns
GIC timer IRQ 25 setup failed: -22
This is because virq 25 (the correct IRQ number specified via device
tree) was allocated to the PERFCTR interrupt (and 24 to the timer, 26 to
the FDC). To fix this, map all of these local interrupts in the hardware
order so as to associate their virq numbers with the correct hw
interrupts.
Fixes: 4cfffcfa5106 ("irqchip/mips-gic: Fix local interrupts")
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
git://anongit.freedesktop.org/git/drm-misc into drm-fixes
Just one vc4 fix from Eric, cc: stable
* tag 'drm-misc-fixes-2017-03-31' of git://anongit.freedesktop.org/git/drm-misc:
drm/vc4: Allocate the right amount of space for boot-time CRTC state.
|
|
To restore operation it's easiest to reinitialise all TSCs. In order to
do this the current trip window needs to be stored in the TSC structure
so that it can be restored upon resume.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
The device match data needs to be accessible outside the probe function,
store it in the private data structure.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
Enable hardware trip points by implementing the set_trips callback. The
thermal core will take care of setting the initial trip point window and
to update it once the driver reports a TSC has moved outside it.
The interrupt structure for this device is a bit odd. There is not a
dedicated IRQ for each TSC, instead the interrupts are shared between
all TSCs. IRQn is fired if the temp monitored in IRQTEMPn is reached in
any of the TSCs, example IRQ3 is fired if temperature in IRQTEMP3 is
reached in either TSC0, TSC1 or TSC2.
For this reason the usage of interrupts in this driver is an all-on or
all-off design. When an interrupt happens all TSCs are checked and all
thermal zones are updated. This could be refined to be more fine grained
but the thermal core takes care of only updating the thermal zones that
have left their trip point window.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
Record how many TSCs are found in struct rcar_gen3_thermal_priv, this is
needed to be able to add hardware interrupts for trip points later. Also
add a check to make sure at least one TSC is found.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
Move the check for a TSC resource before allocating memory for a new
TSC. If no TSC is found there is little point in allocating memory for
it.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
There is no point in protecting a register read with a lock. This is
most likely a leftover from when the driver was reworked before being
submitted for upstream.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
The .thermal_init needs to be delayed a short amount of time to allow
for the TEMP register to contain something useful. If it's not delayed
these warnings are common during boot:
thermal thermal_zone0: failed to read out thermal zone (-5)
thermal thermal_zone1: failed to read out thermal zone (-5)
thermal thermal_zone2: failed to read out thermal zone (-5)
The warnings are triggered by the first call to .get_temp() while the
TEMP register contains 0 and rcar_gen3_thermal_get_temp() returns -EIO
since a TEMP value of 0 will result in a temperature reading which is
out of specifications.
This should have been done in the initial commit which adds the driver
as the same issue was found and corrected for r8a7795.
Fixes: 564e73d283af9d4c ("thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
git://anongit.freedesktop.org/git/drm-intel into drm-fixes
drm/i915 fixes for v4.11-rc5
* tag 'drm-intel-fixes-2017-03-29' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Restore marking context objects as dirty on pinning
drm/i915/gvt: Use force single submit flag to distinguish gvt request from i915 request
drm/i915/gvt: set shadow entry to scratch page while p2m failed
drm/i915/gvt: Fix guest fail to read EDID leading to black guest console issue.
drm/i915/gvt: fix wrong offset when loading RCS mocs
drm/i915/gvt: add write handler for mmio mbctl
drm/i915/kvmgt: Hold struct kvm reference
|
