summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-03-28sony-laptop: remove unused Type4 defineMattia Dongili
Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28sony-laptop: use pr_<level> for messagesMattia Dongili
Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28sony-laptop: ignore hard switch rfkill events (SPIC)Mattia Dongili
There is not much use for these events in userspace and handling the events themselves seems to get in the way of the actual activation of the rf devices. The SNC device doesn't expose them already. https://bugzilla.kernel.org/show_bug.cgi?id=15303 Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28sony-laptop: add some debug printk useful for bug reportsMattia Dongili
Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28platform/x86: intel_mid_powerbutton needs INPUTRandy Dunlap
intel_mid_powerbtn.c uses input interfaces, so it should depend on INPUT to fix build errors when CONFIG_INPUT is not enabled: intel_mid_powerbtn.c:(.text+0x56ca8f): undefined reference to `input_event' intel_mid_powerbtn.c:(.devinit.text+0x2e7b4): undefined reference to `input_allocate_device' intel_mid_powerbtn.c:(.devinit.text+0x2e7ff): undefined reference to `input_set_capability' intel_mid_powerbtn.c:(.devinit.text+0x2e84a): undefined reference to `input_register_device' intel_mid_powerbtn.c:(.devinit.text+0x2e88b): undefined reference to `input_free_device' intel_mid_powerbtn.c:(.devexit.text+0x42f0): undefined reference to `input_unregister_device' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Hong Liu <hong.liu@intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28Enable Dell All-In-One volume up/down keysColin Ian King
Enable volume up and down hotkeys on WMI events GUID 284A0E6B-380E-472A-921F-E52786257FB4 and GUID 02314822-307C-4F66-bf0E-48AEAEB26CC8. Also works around a firmware bug where the _WED method should return an integer containing the key code and in fact the method returns the key code in element zero of a buffer. BugLink: http://bugs.launchpad.net/bugs/701530 BugLink: http://bugs.launchpad.net/bugs/676997 Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28intel_mid_powerbtn: add power button driver for Medfield platform (#3)Hong Liu
The power button is connected to MSIC on Medfield, we will get two interrupts from IOAPIC when pressing or releasing the power button. Signed-off-by: Hong Liu <hong.liu@intel.com> [Minor fixes as noted by Dmitry] Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: add camera keysCorentin Chary
These keys are supposed to be handled by any software using the camera (like webKam or cheese...). They can also be used to actually move the camera when possible. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: reorder device idsCorentin Chary
Each device seems to be in a "group" (devid >> 16 & 0xFF). Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: add touchpad sysfs fileCorentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28asus-laptop: remove deprecated interfaces (lcd_switch and display_get)Corentin Chary
I should have done that one year ago, so it's more than time to do it. These two features use non-standard interfaces. There are the only features that really need multiple path to guess what's the right method name on a specific laptop. Removing them allow to remove a lot of code an significantly clean the driver. This will affect the backlight code which won't be able to know if the backlight is on or off. The platform display file will also be write only (like the one in eeepc-laptop). Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28asus-laptop: let WLED alone on L1400BCorentin Chary
Asus took the DSDT from another model (L84F), made some change to make it work, but forgot to remove WLED method (the laptop doesn't have a wireless card). They even didn't change the model name. ref: https://bugzilla.kernel.org/show_bug.cgi?id=25712 Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: comments keymap to clarify the meaning of some keysCorentin Chary
Found while checking PDF manuals... Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: real touchpad led device id is 0x001000012Corentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: respect wireless_hotplug settingCorentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: support backlight power (bl_power) attributeCorentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: set the right key code for 0xe9Corentin Chary
This key should power off the backlight, not the display, it is also used in acpi/video.c to do the same thing. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: add wimax supportCorentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: add camera and card reader supportCorentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: use the presence bit correctlyCorentin Chary
I checked some more DSDT, and it seems that I wasn't totally right about the meaning of DSTS return value. Bit 0 is clearly the status of the device, and I discovered that bit 16 is set when the device is present. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: reorder definesCorentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: switch to platform_create_bundle()Corentin Chary
This allow to remove ~30 lines of code. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: add hibernate/resume callbacksCorentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: add an helper using simple return codesCorentin Chary
eeepc_wmi_get_devstate returns an acpi_status, so each call need extra logic to handle the return code. This patch add a simple getter, returning a boolean (or a negative error code). Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: return proper error code in eeepc_rfkill_set()Corentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: serialize access to wmi methodCorentin Chary
\AMW0.WMBC, which is the main method that we use, is not reentrant. When wireless hotpluging is enabled, toggling the status of the wireless device using WMBC will trigger a notification and the notification handler need to call WMBC again to get the new status of the device, this will trigger the following error: ACPI Error (dswload-0802): [_T_0] Namespace lookup failure, AE_ALREADY_EXISTS ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20100428/psloop-231) ACPI Error (psparse-0537): Method parse/execution failed [\AMW0.WMBC] (Node f7023b88), AE_ALREADY_EXISTS ACPI: Marking method WMBC as Serialized because of AE_ALREADY_EXISTS error Since there is currently no way to tell the acpi subsystem to mark a method as serialized, we do it in eeepc-wmi. Of course, we could let the first call fail, and then it would work, but it doesn't seems really clean, and it will make the first WMBC call return a random value. This patch was tested on EeePc 1000H with a RaLink RT2860 wireless card using the rt2800pci driver. rt2860sta driver seems to deadlock when we remove the pci device... Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: add hotplug code for Eeepc 1000HCorentin Chary
Implement wireless like hotplug handling (code stolen from eeepc-laptop). Reminder: on some models rfkill is implemented by logically unplugging the wireless card from the PCI bus. Despite sending ACPI notifications, this does not appear to be implemented using standard ACPI hotplug - nor does the firmware provide the _OSC method required to support native PCIe hotplug. The only sensible choice appears to be to handle the hotplugging directly in the platform driver. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: add wlan key found on 1015PCorentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: reorder keymapCorentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28OLPC XO-1.5 ebook switch driverPaul Fox
The OLPC XO-1.5 has an ebook switch, triggered when the laptop screen is rotated then folding down, converting the device into ebook form. This switch is exposed through ACPI. Add a driver that exposes it to userspace as an input device. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28gpio: driver for 42 AB8500 GPIO pinsBibek Basu
To get rid of port expanders, the free GPIOs of ab8500 can be used. There are 42 GPIO pins. Out of which 16 are interrupt capable.This patch implements 16 virtual IRQ mapped to 16 interrupt capable AB8500 GPIOs. Signed-off-by: Bibek Basu <bibek.basu@stericsson.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> [Renamed header file as per MFD structure] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-27net: fix ethtool->set_flags not intended -EINVAL return valueStanislaw Gruszka
After commit d5dbda23804156ae6f35025ade5307a49d1db6d7 "ethtool: Add support for vlan accleration.", drivers that have NETIF_F_HW_VLAN_TX, and/or NETIF_F_HW_VLAN_RX feature, but do not allow enable/disable vlan acceleration via ethtool set_flags, always return -EINVAL from that function. Fix by returning -EINVAL only if requested features do not match current settings and can not be changed by driver. Change any driver that define ethtool->set_flags to use ethtool_invalid_flags() to avoid similar problems in the future (also on drivers that do not have the problem). Tested with modified (to reproduce this bug) myri10ge driver. Cc: stable@kernel.org # 2.6.37+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-27mlx4_en: Fix loss of promiscuityHerbert Xu
The mlx4_en driver uses the combination stop_port/start_port in a number of places. Unfortunately that causes any promiscuous mode settings on the hardware to be lost. This patch fixes that problem. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-27tg3: Fix inline keyword usageJavier Martinez Canillas
The correct usage is "static inline void" not "static void inline". Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-27tg3: use <linux/io.h> and <linux/uaccess.h> instead <asm/io.h> and ↵Javier Martinez Canillas
<asm/uaccess.h> It is proper style to include linux/foo.h instead asm/foo.h if both exist Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-27net: use CHECKSUM_NONE instead of magic numberCesar Eduardo Barros
Two places in the kernel were doing skb->ip_summed = 0. Change both to skb->ip_summed = CHECKSUM_NONE, which is more readable. Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-27Net / jme: Do not use legacy PCI power managementRafael J. Wysocki
The jme driver uses the legacy PCI power management, so it has to do some PCI-specific things in its ->suspend() and ->resume() callbacks, which isn't necessary and should better be done by the PCI sybsystem-level power management code. It also doesn't use device wakeup flags correctly. Convert jme to the new PCI power management framework and make it let the PCI subsystem take care of all the PCI-specific aspects of device handling during system power transitions. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-27myri10ge: small rx_done refactoringStanislaw Gruszka
Avoid theoretical race condition regarding accessing dev->features NETIF_F_LRO flag, which is illustrated below. CPU1 CPU2 myri10ge_clean_rx_done(): myri10ge_set_flags(): or myri10ge_set_rx_csum(): if (dev->features & NETIF_F_LRO) setup lro dev->features |= NETIF_F_LRO or dev->features &= ~NETIF_F_LRO; if (dev->features & NETIF_F_LRO) flush lro On the way reduce myri10ge_rx_done() number of arguments and calls by moving mgp->small_bytes check into that function. That reduce code size from: text data bss dec hex filename 36644 248 100 36992 9080 drivers/net/myri10ge/myri10ge.o to: text data bss dec hex filename 36037 247 100 36384 8e20 drivers/net/myri10ge/myri10ge.o on my i686 system, what should also make myri10ge_clean_rx_done() being faster. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-27can: c_can: Fix tx_bytes accountingJan Altenberg
The current SocketCAN implementation for the Bosch c_can cell doesn't account the TX bytes correctly, because it calls c_can_inval_msg_object() (which clears the msg ctrl register) before reading the DLC value: for (/* nix */; (priv->tx_next - priv->tx_echo) > 0; priv->tx_echo++) { msg_obj_no = get_tx_echo_msg_obj(priv); c_can_inval_msg_object(dev, 0, msg_obj_no); val = c_can_read_reg32(priv, &priv->regs->txrqst1); if (!(val & (1 << msg_obj_no))) { can_get_echo_skb(dev, msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST); stats->tx_bytes += priv->read_reg(priv, &priv->regs->ifregs[0].msg_cntrl) & IF_MCONT_DLC_MASK; stats->tx_packets++; } } So, we will always read 0 for the DLC value and "ifconfig" will report *0* TX Bytes. The fix is quite easy: Just move c_can_inval_msg_object() to the end of the if() statement. So: * We only call c_can_inval_msg_object() if the message was actually transmitted * We read out the DLC value _before_ clearing the msg ctrl register Signed-off-by: Jan Altenberg <jan@linutronix.de> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-27can: c_can_platform: fix irq check in probeMarc Kleine-Budde
This patch fixes the check in the probe function whether a IRQ was supplied to the driver. The original driver check the irq "struct resource *" against <= 0. Use "platform_get_irq" instead. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-27can: c_can: disable one shot mode until driver is fixedMarc Kleine-Budde
This patch disables the one shot mode, until the driver has been fixed and tested to support it. > I'm quite sure I've seen a situation where msg_obj 17 "seemed" to be > pending, while msg_obj 18 and 19 already have been transmitted. But > in that case, I enabled ONESHOT for the can interface, which enables > the DA mode (automatic retransmission is disabled). Reported-by: Jan Altenberg <jan@linutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Cc: Bhupesh Sharma <bhupesh.sharma@st.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-27Merge branch 'irq-cleanup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tile: Use generic show_interupts() tile: Convert to new irq function names dma: Ipu: Convert interupt code
2011-03-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: Add MODULE_DEVICE_TABLE to max8997 and max8998 regulator: fix tps6524x section mismatch regulator: Remove more wm831x-specific IRQ operations regulator: add ab8500 enable and raise time delays regulator: provide consumer interface for fall/rise time regulator: add set_voltage_time_sel infrastructure regulator: initialization for ab8500 regulators regulator: add support for USB voltage regulator regulator: switch the ab3100 to use enable_time() Regulator: add suspend-finish API for regulator core. regulator: fix typo in Kconfig regulator: Convert WM831x regulators to genirq regulator: If we fail when setting up a supply say which supply
2011-03-27Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Clean up max8997 IRQ namespace mfd: Fold irq_set_chip/irq_set_handler mfd: Cleanup irq namespace mfd: twl6030: Cleanup interrupt handling mfd: twl4030: Cleanup interrupt handling mfd: mx8925: Remove irq_desc leftovers mfd: htc-i2cpld: Cleanup interrupt handling mfd: htc-egpio: Cleanup interrupt handling mfd: ezx-pcap: Remvove open coded irq handling mfd: 88pm860x: Remove unused irq_desc leftovers mfd: asic3: Cleanup irq handling mfd: Select MFD_CORE if TPS6105X driver is configured mfd: Add MODULE_DEVICE_TABLE to rdc321x-southbridge mfd: Add MAX8997/8966 IRQ control mfd: Constify i2c_device_id tables mfd: OLPC: Clean up names to match what OLPC actually uses mfd: Add mfd_clone_cell(), convert cs5535-mfd/olpc-xo1 to it
2011-03-27Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (pmbus) Fix temperature limit register access
2011-03-27Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: hwspinlock: depend on OMAP4 ARM: OMAP2+: Fix warnings for GPMC interrupt OMAP4: PandaBoard: remove unused power regulators arm: mach-omap2: omap_l3_smx: fix irq handler setup arm: mach-omap2: devices: fix omap3_l3_init() return value
2011-03-27Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: staging: Fix bdops->check_events() misconversion in cyasblkdev_block.c ide: ensure that we re-run the queue handler
2011-03-27Merge branch 'for-2.6.39/drivers' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.39/drivers' of git://git.kernel.dk/linux-2.6-block: (122 commits) cciss: fix lost command issue drbd: need include for bitops functions declarations Revert "cciss: Add missing allocation in scsi_cmd_stack_setup and corresponding deallocation" cciss: fix missed command status value CMD_UNABORTABLE cciss: remove unnecessary casts cciss: Mask off error bits of c->busaddr in cmd_special_free when calling pci_free_consistent cciss: Inform controller we are using 32-bit tags. cciss: hoist tag masking out of loop cciss: Add missing allocation in scsi_cmd_stack_setup and corresponding deallocation cciss: export resettable host attribute drbd: drop code present under #ifdef which is relevant to 2.6.28 and below drbd: Fixed handling of read errors on a 'VerifyS' node drbd: Fixed handling of read errors on a 'VerifyT' node drbd: Implemented real timeout checking for request processing time drbd: Remove unused function atodb_endio() drbd: improve log message if received sector offset exceeds local capacity drbd: kill dead code drbd: don't BUG_ON, if bio_add_page of a single page to an empty bio fails drbd: Removed left over, now wrong comments drbd: serialize admin requests for new verify run with pending bitmap io ...
2011-03-27Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (f71882fg) Add support for the F71889A hwmon: (f71882fg) Add support for the F81865F hwmon: (f71882fg) Document all supported devices hwmon: (f71882fg) Per-chip fan/temperature input count tables hwmon: (f71882fg) Secure chip property definition arrays
2011-03-27Merge branch 'for-linus-1' of git://git.infradead.org/mtd-2.6Linus Torvalds
* 'for-linus-1' of git://git.infradead.org/mtd-2.6: (49 commits) mtd: mtdswap: fix compilation warning mtdswap: kill strict error handling option mtd: nand: enable software BCH ECC in nand simulator mtd: nand: add software BCH ECC support mtd: fix printf format warnings, mostly lack of %zd for size_t, in mtdswap mtd: sm_rtl: check kmalloc return value mtd: cfi: add support for AMIC flashes (e.g. A29L160AT) lib: add shared BCH ECC library mtd: mxc_nand: fix OOB corruption when page size > 2KiB mtd: DaVinci: Removed header file that is not required mtd: pxa3xx_nand: clean the keep configure code mtd: pxa3xx_nand: mtd scan id process could be defined by driver itself mtd: pxa3xx_nand: unify prepare command mtd: pxa3xx_nand: discard wait_for_event,write_cmd,__readid function mtd: pxa3xx_nand: rework irq logic mtd: pxa3xx_nand: make scan procedure more clear mtd: speedtest: fix integer overflow mtd: mxc_nand: fix read past buffer end mtd: omap3: nand: report corrected ecc errors jffs2: remove a trailing white space in commentaries ...
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-31 07:18:29 +0000