summaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)Author
2011-03-14do_last: kill a rudiment of old ->d_revalidate() workaroundAl Viro
There used to be time when ->d_revalidate() couldn't return an error. So intents code had lookup_instantiate_filp() stash ERR_PTR(error) in nd->intent.open.filp and had it checked after lookup_hash(), to catch the otherwise silent failures. That had been introduced by commit 4af4c52f34606bdaab6930a845550c6fb02078a4. These days ->d_revalidate() can and does propagate errors back to callers explicitly, so this check isn't needed anymore. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14fold __open_namei_create() and open_will_truncate() into do_last()Al Viro
... and clean up a bit more Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14do_last: unify may_open() call and everyting after itAl Viro
We have a bunch of diverging codepaths in do_last(); some of them converge, but the case of having to create a new file duplicates large part of common tail of the rest and exits separately. Massage them so that they could be merged. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14move may_open() from __open_name_create() to do_last()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14expand finish_open() in its only callerAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14sanitize pathname component hash calculationAl Viro
Lift it to lookup_one_len() and link_path_walk() resp. into the same place where we calculated default hash function of the same name. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14kill __lookup_one_len()Al Viro
only one caller left Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14switch non-create side of open() to use of do_last()Al Viro
Instead of path_lookupat() doing trailing symlink resolution, use the same scheme as on the O_CREAT side. Walk with LOOKUP_PARENT, then (in do_last()) look the final component up, then either open it or return error or, if it's a symlink, give the symlink back to path_openat() to be resolved there. The really messy complication here is RCU. We don't want to drop out of RCU mode before the final lookup, since we don't want to bounce parent directory ->d_count without a good reason. Result is _not_ pretty; later in the series we'll clean it up. For now we are roughly back where we'd been before the revert done by Nick's series - top-level logics of path_openat() is cleaned up, do_last() does actual opening, symlink resolution is done uniformly. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14get rid of nd->fileAl Viro
Don't stash the struct file * used as starting point of walk in nameidata; pass file ** to path_init() instead. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14get rid of the last LOOKUP_RCU dependencies in link_path_walk()Al Viro
New helper: terminate_walk(). An error has happened during pathname resolution and we either drop nd->path or terminate RCU, depending the mode we had been in. After that, nd is essentially empty. Switch link_path_walk() to using that for cleanup. Now the top-level logics in link_path_walk() is back to sanity. RCU dependencies are in the lower-level functions. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14make nameidata_dentry_drop_rcu_maybe() always leave RCU modeAl Viro
Now we have do_follow_link() guaranteed to leave without dangling RCU and the next step will get LOOKUP_RCU logics completely out of link_path_walk(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14make handle_dots() leave RCU mode on errorAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14clear RCU on all failure exits from link_path_walk()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14pull handling of . and .. into inlined helperAl Viro
getting LOOKUP_RCU checks out of link_path_walk()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14kill out_dput: in link_path_walk()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14separate -ESTALE/-ECHILD retries in do_filp_open() from real workAl Viro
new helper: path_openat(). Does what do_filp_open() does, except that it tries only the walk mode (RCU/normal/force revalidation) it had been told to. Both create and non-create branches are using path_lookupat() now. Fixed the double audit_inode() in non-create branch. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14switch do_filp_open() to struct open_flagsAl Viro
take calculation of open_flags by open(2) arguments into new helper in fs/open.c, move filp_open() over there, have it and do_sys_open() use that helper, switch exec.c callers of do_filp_open() to explicit (and constant) struct open_flags. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14Collect "operation mode" arguments of do_last() into a structureAl Viro
No point messing with passing shitloads of "operation mode" arguments to do_open() one by one, especially since they are not going to change during do_filp_open(). Collect them into a struct, fill it and pass to do_last() by reference. Make sure that lookup intent flags are correctly set and removed - we want them for do_last(), but they make no sense for __do_follow_link(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14clean up the failure exits after __do_follow_link() in do_filp_open()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14pull security_inode_follow_link() into __do_follow_link()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14pull dropping RCU on success of link_path_walk() into path_lookupat()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14untangle the "need_reval_dot" messAl Viro
instead of ad-hackery around need_reval_dot(), do the following: set a flag (LOOKUP_JUMPED) in the beginning of path, on absolute symlink traversal, on ".." and on procfs-style symlinks. Clear on normal components, leave unchanged on ".". Non-nested callers of link_path_walk() call handle_reval_path(), which checks that flag is set and that fs does want the final revalidate thing, then does ->d_revalidate(). In link_path_walk() all the return_reval stuff is gone. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14merge component type recognitionAl Viro
no need to do it in three places... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14merge path_init and path_init_rcuAl Viro
Actual dependency on whether we want RCU or not is in 3 small areas (as it ought to be) and everything around those is the same in both versions. Since each function has only one caller and those callers are on two sides of if (flags & LOOKUP_RCU), it's easier and cleaner to merge them and pull the checks inside. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14sanitize path_walk() messAl Viro
New helper: path_lookupat(). Basically, what do_path_lookup() boils to modulo -ECHILD/-ESTALE handler. path_walk* family is gone; vfs_path_lookup() is using link_path_walk() directly, do_path_lookup() and do_filp_open() are using path_lookupat(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14take RCU-dependent stuff around exec_permission() into a new helperAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14kill path_lookup()Al Viro
all remaining callers pass LOOKUP_PARENT to it, so flags argument can die; renamed to kern_path_parent() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14GFS2: Update to AIL list lockingSteven Whitehouse
The previous patch missed a couple of places where the AIL list needed locking, so this fixes up those places, plus a comment is corrected too. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Chinner <dchinner@redhat.com>
2011-03-13compat breakage in preadv() and pwritev()Al Viro
Fix for a dumb preadv()/pwritev() compat bug - unlike the native variants, the compat_... ones forget to check FMODE_P{READ,WRITE}, so e.g. on pipe the native preadv() will fail with -ESPIPE and compat one will act as readv() and succeed. Not critical, but it's a clear bug with trivial fix, so IMO it's OK for -final. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-13compat breakage in preadv() and pwritev()Al Viro
Fix for a dumb preadv()/pwritev() compat bug - unlike the native variants, compat_... ones forget to check FMODE_P{READ,WRITE}, so e.g. on pipe the native preadv() will fail with -ESPIPE and compat one will act as readv() and succeed. Not critical, but it's a clear bug with trivial fix. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: break out of shrink_delalloc earlier btrfs: fix not enough reserved space btrfs: fix dip leak Btrfs: make sure not to return overlapping extents to fiemap Btrfs: deal with short returns from copy_from_user Btrfs: fix regressions in copy_from_user handling
2011-03-12Btrfs: break out of shrink_delalloc earlierChris Mason
Josef had changed shrink_delalloc to exit after three shrink attempts, which wasn't quite enough because new writers could race in and steal free space. But it also fixed deadlocks and stalls as we tried to recover delalloc reservations. The code was tweaked to loop 1024 times, and would reset the counter any time a small amount of progress was made. This was too drastic, and with a lot of writers we can end up stuck in shrink_delalloc forever. The shrink_delalloc loop is fairly complex because the caller is looping too, and the caller will go ahead and force a transaction commit to make sure we reclaim space. This reworks things to exit shrink_delalloc when we've forced some writeback and the delalloc reservations have gone down. This means the writeback has not just started but has also finished at least some of the metadata changes required to reclaim delalloc space. If we've got this wrong, we're returning ENOSPC too early, which is a big improvement over the current behavior of hanging the machine. Test 224 in xfstests hammers on this nicely, and with 1000 writers trying to fill a 1GB drive we get our first ENOSPC at 93% full. The other writers are able to continue until we get 100%. This is a worst case test for btrfs because the 1000 writers are doing small IO, and the small FS size means we don't have a lot of room for metadata chunks. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-03-11xfs: don't name variables "panic"Alex Elder
The new xfs_alert_tag() used a variable named "panic", and that is to be avoided. Rename it. Signed-off-by: Alex Elder <aelder@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2011-03-11Cleanup: Factor out some cut-and-paste code.Rob Landley
Factor out some cut-and-paste code in options parsing. Saves about 800 bytes on x86-64. Signed-off-by: Rob Landley <rlandley@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11cleanup: save 60 lines/100 bytes by combining two mostly duplicate functions.Rob Landley
Eliminate two mostly duplicate functions (nfs_parse_simple_hostname() and nfs_parse_protected_hostname()) and instead just make the calling function (nfs_parse_devname()) do everything. Signed-off-by: Rob Landley <rlandley@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFS: account direct-io into task io accountingKonstantin Khlebnikov
Account NFS direct-io reads and writes into Task I/O Accounting. Do it before complition to handle aio. NFS have unusual direct-io implementation, thus accounting in generic code does not work. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4: Send unmapped uid/gids to the server when using auth_sysTrond Myklebust
The new behaviour is enabled using the new module parameter 'nfs4_disable_idmapping'. Note that if the server rejects an unmapped uid or gid, then the client will automatically switch back to using the idmapper. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4: Propagate the error NFS4ERR_BADOWNER to nfs4_do_setattrTrond Myklebust
This will be required in order to switch uid/gid mapping back on if the admin has tried to disable it. Note that we also propagate NFS4ERR_BADNAME at the same time, in order to work around a Linux server bug. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4: cleanup idmapper functions to take an nfs_server argumentTrond Myklebust
...instead of the nfs_client. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4: Send unmapped uid/gids to the server if the idmapper failsTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4: If the server sends us a numeric uid/gid then accept itTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: reject zero layout with zeroed stripe unitBenny Halevy
Allowing stripe_unit==0 causes the client to crash later on when dividing by zero. Reported-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: Clear lseg pointer in ->doio functionFred Isaman
Now that we have access to the pointer, clear it immediately after the put, instead of in caller. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: rearrange ->doio argsFred Isaman
This will make it possible to clear the lseg pointer in the same function as it is put, instead of in the caller nfs_pageio_doio(). Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: pnfs filelayout driver writeFred Isaman
Allows the pnfs filelayout driver to write to the data servers. Note that COMMIT to data servers will be implemented in a future patch. To avoid improper behavior, for the moment any WRITE to a data server that would also require a COMMIT to the data server is sent NFS_FILE_SYNC. Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: remove GETATTR from ds writesFred Isaman
Any WRITE compound directed to a data server needs to have the GETATTR calls suppressed. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: implement generic pnfs layer write switchAndy Adamson
Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: trigger LAYOUTGET for writesFred Isaman
Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: Send lseg down into nfs_write_rpcsetupFred Isaman
We grab the lseg sent in from the doio function and attach it to each struct nfs_write_data created. This is how the lseg will be sent to the layout driver. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-11NFSv4.1: add callback to nfs4_write_doneFred Isaman
Add callback that pnfs layout driver can use to do its own handling of data server WRITE response. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-21 01:27:17 +0000