| Age | Commit message (Collapse) | Author |
|---|
|
With this xdr_reserve_space can help us enforce various limits.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
After this we can handle for example getattr of very large ACLs.
Read, readdir, readlink are still special cases with their own limits.
Also we can't handle a new operation starting close to the end of a
page.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This will be used in the server side in a few cases:
- when certain operations (read, readdir, readlink) fail after
encoding a partial response.
- when we run out of space after encoding a partial response.
- in readlink, where we initially reserve PAGE_SIZE bytes for
data, then truncate to the actual size.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
'x86/amd', 'arm/exynos', 'arm/renesas', 'ppc/pamu' and 'arm/msm' into next
|
|
'pci/misc' into next
* pci/host-exynos:
PCI: exynos: Fix add_pcie_port() section mismatch warning
* pci/host-imx6:
PCI: imx6: Add support for MSI
PCI: designware: Make MSI ISR shared IRQ aware
PCI: imx6: Remove optional (and unused) IRQs
PCI: imx6: Drop old IRQ mapping
PCI: imx6: Use new clock names
PCI: imx6: Fix imx6_add_pcie_port() section mismatch warning
* pci/resource:
i82875p_edac: Assign PCI resources before adding device
* pci/misc:
ARM/PCI: Call pcie_bus_configure_settings() to set MPS
PCI: Make pci_bus_add_device() void
Conflicts:
drivers/edac/i82875p_edac.c
|
|
The macro offsetofend() introduces unnecessary temporary variable
"tmp". The patch avoids that and saves a bit memory in stack.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
pci_bus_add_device() always returns 0, so there's no point in returning
anything at all. Make it a void function and remove the tests of the
return value from the callers.
[bhelgaas: changelog, remove unused "err" from i82875p_setup_overfl_dev()]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Currently blk-mq registers all the hardware queues in sysfs,
regardless of whether it uses them (e.g. they have CPU mappings)
or not. The unused hardware queues lack the cpux/ directories,
and the other sysfs entries (like active, pending, etc) are all
zeroes.
Change this so that sysfs correctly reflects the current mappings
of the hardware queues.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Pulled in for the blk_mq_tag_to_rq() change, which impacts
mtip32xx.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
flush request is special, which borrows the tag from the parent
request. Hence blk_mq_tag_to_rq needs special handling to return
the flush request from the tag.
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
ACPI can be used to enumerate PNP devices, but the code does not
handle this in the right way currently. Namely, if an ACPI device
object
1. Has a _CRS method,
2. Has an identification of
"three capital characters followed by four hex digits",
3. Is not in the excluded IDs list,
it will be enumerated to PNP bus (that is, a PNP device object will
be create for it). This means that, actually, the PNP bus type is
used as the default bus type for enumerating _HID devices in ACPI.
However, more and more _HID devices need to be enumerated to the
platform bus instead (that is, platform device objects need to be
created for them). As a result, the device ID list in acpi_platform.c
is used to enforce creating platform device objects rather than PNP
device objects for matching devices. That list has been continuously
growing recently, unfortunately, and it is pretty much guaranteed to
grow even more in the future.
To address that problem it is better to enumerate _HID devices
as platform devices by default. To this end, change the way of
enumerating PNP devices by adding a PNP ACPI scan handler that
will use a device ID list to create PNP devices for the ACPI
device objects whose device IDs are present in that list.
The initial device ID list in the PNP ACPI scan handler contains
all of the pnp_device_id strings from all the existing PNP drivers,
so this change should be transparent to the PNP core and all of the
PNP drivers. Still, in the future it should be possible to reduce
its size by converting PNP drivers that need not be PNP for any
technical reasons into platform drivers.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[rjw: Rewrote the changelog, modified the PNP ACPI scan handler code]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
|
|
Currently, all the power supply devices are registered with wakeup source,
this results in that every power_supply_changed() invocation brings
the system out of suspend-to-freeze state.
This is overkill as some device drivers, e.g. ACPI battery driver,
have the ability to check the device status and wake up the system
from sleeping only when necessary.
Thus introduce a new API which allows device to be registered
w/o wakeup source.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
This commit adds the sysfs interface for enabling QP0 on VFs for
selected VF/port.
By default, no VFs are enabled for QP0 operation.
To enable QP0 operation on a VF/port, under
/sys/class/infiniband/mlx4_x/iov/<b:d:f>/ports/x there are two new entries:
- smi_enabled (read-only). Indicates whether smi is currently
enabled for the indicated VF/port
- enable_smi_admin (rw). Used by the admin to request that smi
capability be enabled or disabled for the indicated VF/port.
0 = disable, 1 = enable.
The requested enablement will occur at the next reset of the
VF (e.g. driver restart on the VM which owns the VF).
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
This commit adds the infrastructure for enabling selected VFs to
operate SMI (QP0) MADs without restriction.
Additionally, for these enabled VFs, their QP0 proxy and tunnel QPs
are MLX QPs. As such, they operate over VL15. Therefore, they are
not affected by "credit" problems or changes in the VLArb table (which
may shut down VL0).
Non-enabled VFs may only create UD proxy QP0 qps (which are forced by
the hypervisor to send packets using the q-key it assigns and places
in the qp-context). Thus, non-enabled VFs will not pose a security
risk. The hypervisor discards any privileged MADs it receives from
these non-enabled VFs.
By default, all VFs are NOT enabled, and must explicitly be enabled
by the administrator.
The sysfs interface which operates the VF enablement infrastructure
is provided in the next commit.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
Currently, VFs in SRIOV VFs are denied QP0 access. The main reason
for this decision is security, since Subnet Management Datagrams
(SMPs) are not restricted by network partitioning and may affect the
physical network topology. Moreover, even the SM may be denied access
from portions of the network by setting management keys unknown to the
SM.
However, it is desirable to grant SMI access to certain privileged
VFs, so that certain network management activities may be conducted
within virtual machines instead of the hypervisor.
This commit does the following:
1. Create QP0 tunnel QPs for all VFs.
2. Discard SMI mads sent-from/received-for non-privileged VFs in the
hypervisor MAD multiplex/demultiplex logic. SMI mads from/for
privileged VFs are allowed to pass.
3. MAD_IFC wrapper changes/fixes. For non-privileged VFs, only
host-view MAD_IFC commands are allowed, and only for SMI LID-Routed
GET mads. For privileged VFs, there are no restrictions.
This commit does not allow privileged VFs as yet. To determine if a VF
is privileged, it calls function mlx4_vf_smi_enabled(). This function
returns 0 unconditionally for now.
The next two commits allow defining and activating privileged VFs.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq into pm-devfreq
Pull devfreq updates for v3.16 from MyungJoo Ham.
- Clean up with modern macro in the core and drivers.
- Fix incorrect error returns
- Remove dead CONFIG check.
- Fix resource leak in a driver.
* tag 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq:
PM / devfreq: remove checks for CONFIG_EXYNOS_ASV
PM / devfreq: exynos5: Use devm_devfreq_* function using device resource management
PM / devfreq: exynos4: Use devm_devfreq_* function using device resource management
PM / devfreq: Add devm_devfreq_{register,unregister}_opp_notfier function
PM / devfreq: Add resource-managed function for devfreq device
PM / devfreq: Fix devfreq_remove_device() to improve the sequence of resource free
PM / devfreq: exynos: make more PPMU code common
PM / devfreq: exynos5: introduce struct busfreq_ppmu_data
PM / devfreq: exynos4: introduce struct busfreq_ppmu_data
PM / devfreq: exynos4: use common PPMU code
PM / devfreq: exynos5: Add CONFIG_PM_OPP dependency to fix probe fail
PM / devfreq: exynos5: Use SIMPLE_DEV_PM_OPS macro
PM / devfreq: exynos4: Add CONFIG_PM_OPP dependency to fix probe fail
PM / devfreq: exynos4: Use SIMPLE_DEV_PM_OPS macro
PM / devfreq: exynos4: Fix bug of resource leak and code clean on probe()
|
|
Pull ARM fixes from Russell King:
"The usual random collection of relatively small ARM fixes"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8063/1: bL_switcher: fix individual online status reporting of removed CPUs
ARM: 8064/1: fix v7-M signal return
ARM: 8057/1: amba: Add Qualcomm vendor ID.
ARM: 8052/1: unwind: Fix handling of "Pop r4-r[4+nnn],r14" opcode
ARM: 8051/1: put_user: fix possible data corruption in put_user
ARM: 8048/1: fix v7-M setup stack location
|
|
Add a function to walk the list of subnodes of a mdio bus and look for
a node that matches the phy's address with its 'reg' property. If found,
set the of_node pointer for the phy. This allows auto-probed pyh
devices to be augmented by information passed in via DT.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Davidm Mosberger <davidm@egauge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
If devices are not SG starved, we waste a lot of time potentially
collapsing SG segments. Enough that 1.5% of the CPU time goes
to this, at only 400K IOPS. Add a queue flag, QUEUE_FLAG_NO_SG_MERGE,
which just returns the number of vectors in a bio instead of looping
over all segments and checking for collapsible ones.
Add a BLK_MQ_F_SG_MERGE flag so that drivers can opt-in on the sg
merging, if they so desire.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Support direct requests that span multiple pnfs data servers by
comparing nfs_pgio_header->verf to a cached verf in pnfs_commit_bucket.
Continue to use dreq->verf if the MDS is used / non-pNFS.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Since the ability to split pages into subpage requests has been added,
nfs_pgio_header->rpc_list only ever has one pgio data.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Operations that modify state for a whole page must be syncronized across
all requests within a page group. In the write path, this is calling
end_page_writeback and removing the head request from an inode.
Both of these operations should not be called until all requests
in a page group have reached the point where they would call them.
This patch should have no effect yet since all page groups currently
have one request, but will come into play when pg_test functions are
modified to split pages into sub-page regions.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Operations that modify state for a whole page must be syncronized across
all requests within a page group. In the read path, this is calling
unlock_page and SetPageUptodate. Both of these functions should not be
called until all requests in a page group have reached the point where
they would call them.
This patch should have no effect yet since all page groups currently
have one request, but will come into play when pg_test functions are
modified to split pages into sub-page regions.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Add "page groups" - a circular list of nfs requests (struct nfs_page)
that all reference the same page. This gives nfs read and write paths
the ability to account for sub-page regions independently. This
somewhat follows the design of struct buffer_head's sub-page
accounting.
Only "head" requests are ever added/removed from the inode list in
the buffered write path. "head" and "sub" requests are treated the
same through the read path and the rest of the write/commit path.
Requests are given an extra reference across the life of the list.
Page groups are never rejoined after being split. If the read/write
request fails and the client falls back to another path (ie revert
to MDS in PNFS case), the already split requests are pushed through
the recoalescing code again, which may split them further and then
coalesce them into properly sized requests on the wire. Fragmentation
shouldn't be a problem with the current design, because we flush all
requests in page group when a non-contiguous request is added, so
the only time resplitting should occur is on a resend of a read or
write.
This patch lays the groundwork for sub-page splitting, but does not
actually do any splitting. For now all page groups have one request
as pg_test functions don't yet split pages. There are several related
patches that are needed support multiple requests per page group.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
This is a step toward allowing pg_test to inform the the
coalescing code to reduce the size of requests so they may fit in
whatever scheme the pg_test callback wants to define.
For now, just return the size of the request if there is space, or 0
if there is not. This shouldn't change any behavior as it acts
the same as when the pg_test functions returned bool.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
@inode is passed but not used.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Remove unused flags PG_NEED_COMMIT and PG_NEED_RESCHED.
Add comments describing how each flag is used.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Most of this code is the same for both the read and write paths, so
combine everything and use the rw_ops when necessary.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
I don't think we've ever caught any bugs with this, and there's the
list poisoning for the plug lists to catch uninitialized cases.
So remove the magic member and save 8 bytes in the struct.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
mips-for-linux-next
|
|
This is unused since all users (OMAP4/5) are DT only.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add common DT binding documentation for touchscreen devices and
implement input_parse_touchscreen_of_params, which parses the common
properties and configures the input device accordingly.
The method currently does not interpret the axis inversion properties,
since there is no matching flag in the generic linux input device.
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Combining these functions will let me make a single nfs_rw_common_ops
struct (see the next patch).
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
The read and write paths do exactly the same thing for the rpc_prepare
rpc_op. This patch combines them together into a single function.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
I create a new struct nfs_rw_ops to decide the differences between reads
and writes. This struct will be set when initializing a new
nfs_pgio_descriptor, and then passed on to the nfs_rw_header when a new
header is allocated.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
The header had a pointer to the verifier that was set from the old write
data struct. We don't need to keep the pointer around now that we have
shared structures.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
* pci/misc:
PCI: Fix return value from pci_user_{read,write}_config_*()
PCI: Turn pcibios_penalize_isa_irq() into a weak function
PCI: Test for std config alias when testing extended config space
|
|
into next
* pci/hotplug:
PCI: cpqphp: Fix possible null pointer dereference
NVMe: Implement PCIe reset notification callback
PCI: Notify driver before and after device reset
* pci/pci_is_bridge:
pcmcia: Use pci_is_bridge() to simplify code
PCI: pciehp: Use pci_is_bridge() to simplify code
PCI: acpiphp: Use pci_is_bridge() to simplify code
PCI: cpcihp: Use pci_is_bridge() to simplify code
PCI: shpchp: Use pci_is_bridge() to simplify code
PCI: rpaphp: Use pci_is_bridge() to simplify code
sparc/PCI: Use pci_is_bridge() to simplify code
powerpc/PCI: Use pci_is_bridge() to simplify code
ia64/PCI: Use pci_is_bridge() to simplify code
x86/PCI: Use pci_is_bridge() to simplify code
PCI: Use pci_is_bridge() to simplify code
PCI: Add new pci_is_bridge() interface
PCI: Rename pci_is_bridge() to pci_has_subordinate()
* pci/virtualization:
PCI: Introduce new device binding path using pci_dev.driver_override
Conflicts:
drivers/pci/pci-sysfs.c
|
|
The only difference is the write verifier field, but we can keep that
for a little bit longer.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
At this point, the only difference between nfs_read_data and
nfs_write_data is the write verifier.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Reads and writes have very similar results. This patch combines the two
structs together with comments to show where the differing fields are
used.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Reads and writes have very similar arguments. This patch combines them
together and documents the few fields used only by write.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
The driver_override field allows us to specify the driver for a device
rather than relying on the driver to provide a positive match of the
device. This shortcuts the existing process of looking up the vendor and
device ID, adding them to the driver new_id, binding the device, then
removing the ID, but it also provides a couple advantages.
First, the above existing process allows the driver to bind to any device
matching the new_id for the window where it's enabled. This is often not
desired, such as the case of trying to bind a single device to a meta
driver like pci-stub or vfio-pci. Using driver_override we can do this
deterministically using:
echo pci-stub > /sys/bus/pci/devices/0000:03:00.0/driver_override
echo 0000:03:00.0 > /sys/bus/pci/devices/0000:03:00.0/driver/unbind
echo 0000:03:00.0 > /sys/bus/pci/drivers_probe
Previously we could not invoke drivers_probe after adding a device to
new_id for a driver as we get non-deterministic behavior whether the driver
we intend or the standard driver will claim the device. Now it becomes a
deterministic process, only the driver matching driver_override will probe
the device.
To return the device to the standard driver, we simply clear the
driver_override and reprobe the device:
echo > /sys/bus/pci/devices/0000:03:00.0/driver_override
echo 0000:03:00.0 > /sys/bus/pci/devices/0000:03:00.0/driver/unbind
echo 0000:03:00.0 > /sys/bus/pci/drivers_probe
Another advantage to this approach is that we can specify a driver override
to force a specific binding or prevent any binding. For instance when an
IOMMU group is exposed to userspace through VFIO we require that all
devices within that group are owned by VFIO. However, devices can be
hot-added into an IOMMU group, in which case we want to prevent the device
from binding to any driver (override driver = "none") or perhaps have it
automatically bind to vfio-pci. With driver_override it's a simple matter
for this field to be set internally when the device is first discovered to
prevent driver matches.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Several PCIe-to-PCI bridges fail to provide a PCIe capability, causing us
to handle them as conventional PCI devices when they really use the
requester ID of the secondary bus. We need to differentiate these from
PCIe-to-PCI bridges that actually use the conventional PCI ID when a PCIe
capability is not present, such as those found on the root complex of may
Intel chipsets. Add a dev_flag bit to identify devices to be handled as
standard PCIe-to-PCI bridges.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The read_pageio_init method is just a very convoluted way to grab the
right nfs_pageio_ops vector. The vector to chose is not a choice of
protocol version, but just a pNFS vs MDS I/O choice that can simply be
done inside nfs_pageio_init_read based on the presence of a layout
driver, and a new force_mds flag to the special case of falling back
to MDS I/O on a pNFS-capable volume.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
The write_pageio_init method is just a very convoluted way to grab the
right nfs_pageio_ops vector. The vector to chose is not a choice of
protocol version, but just a pNFS vs MDS I/O choice that can simply be
done inside nfs_pageio_init_write based on the presence of a layout
driver, and a new force_mds flag to the special case of falling back
to MDS I/O on a pNFS-capable volume.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
