summaryrefslogtreecommitdiff
path: root/net/bluetooth/hci_event.c
AgeCommit message (Collapse)Author
2012-10-11Bluetooth: AMP: Handle number of compl blocks for AMP_LINKAndrei Emeltchenko
Add handling blocks count for AMP link. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-28Bluetooth: Use %zu print specifier for size_t typeAndrei Emeltchenko
Correct warnings Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: Use %pMR in debug instead of batostrAndrei Emeltchenko
Instead of old unsafe batostr function use %pMR print specifier for printing Bluetooth addresses in debug and error statements. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: Fix two warnings in BT_DBGGustavo Padovan
We just need to use the right modifiers Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Handle Accept phylink command status evtAndrei Emeltchenko
When receiving HCI Command Status event for Accept Physical Link execute HCI Write Remote AMP Assoc with data saved from A2MP Create Physical Link Request. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Process Chan Selected eventAndrei Emeltchenko
Channel Selected event indicates that link information data is available. Read it with Read Local AMP Assoc command. The data shall be sent in the A2MP Create Physical Link Request. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Write remote AMP AssocAndrei Emeltchenko
When receiving HCI Command Status after HCI Create Physical Link execute HCI Write Remote AMP Assoc command to AMP controller. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Create Physical LinkAndrei Emeltchenko
When receiving A2MP Get AMP Assoc Response execute HCI Create Physical Link to AMP controller. Define function which will run when receiving HCI Command Status. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Use HCI cmd to Read Loc AMP AssocAndrei Emeltchenko
When receiving A2MP Get AMP Assoc Request execute Read Local AMP Assoc HCI command to AMP controller. If the AMP Assoc data is larger than it can fit to HCI event only fragment is read. When all fragments are read send A2MP Get AMP Assoc Response. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Use HCI cmd to Read AMP InfoAndrei Emeltchenko
When receiving A2MP Get Info Request execute Read Local AMP Info HCI command to AMP controller with function to be executed upon receiving command complete event. Function will handle A2MP Get Info Response. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-24Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2012-09-18Bluetooth: mgmt: Implement support for passkey notificationJohan Hedberg
This patch adds support for Secure Simple Pairing with devices that have KeyboardOnly as their IO capability. Such devices will cause a passkey notification on our side and optionally also keypress notifications. Without this patch some keyboards cannot be paired using the mgmt interface. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-07Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-08-21Bluetooth: mgmt: Add device disconnect reasonMikel Astiz
MGMT_EV_DEVICE_DISCONNECTED will now expose the disconnection reason to userland, distinguishing four possible values: 0x00 Reason not known or unspecified 0x01 Connection timeout 0x02 Connection terminated by local host 0x03 Connection terminated by remote host Note that the local/remote distinction just determines which side terminated the low-level connection, regardless of the disconnection of the higher-level profiles. This can sometimes be misleading and thus must be used with care. For example, some hardware combinations would report a locally initiated disconnection even if the user turned Bluetooth off in the remote side. Signed-off-by: Mikel Astiz <mikel.astiz@bmw-carit.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-21Bluetooth: Fix minor coding style in hci_event.cMikel Astiz
Replace the status checks with the short form of the boolean expression. Signed-off-by: Mikel Astiz <mikel.astiz@bmw-carit.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Set name_state to unknown when entry name is emptyRam Malovany
When the name of the given entry is empty , the state needs to be updated accordingly. Cc: stable@vger.kernel.org Signed-off-by: Ram Malovany <ramm@ti.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Fix using a NULL inquiry cache entryRam Malovany
If the device was not found in a list of found devices names of which are pending.This may happen in a case when HCI Remote Name Request was sent as a part of incoming connection establishment procedure. Hence there is no need to continue resolving a next name as it will be done upon receiving another Remote Name Request Complete Event. This will fix a kernel crash when trying to use this entry to resolve the next name. Cc: stable@vger.kernel.org Signed-off-by: Ram Malovany <ramm@ti.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Fix using NULL inquiry entryRam Malovany
If entry wasn't found in the hci_inquiry_cache_lookup_resolve do not resolve the name.This will fix a kernel crash when trying to use NULL pointer. Cc: stable@vger.kernel.org Signed-off-by: Ram Malovany <ramm@ti.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Fix legacy pairing with some devicesSzymon Janc
Some devices e.g. some Android based phones don't do SDP search before pairing and cancel legacy pairing when ACL is disconnected. PIN Code Request event which changes ACL timeout to HCI_PAIRING_TIMEOUT is only received after remote user entered PIN. In that case no L2CAP is connected so default HCI_DISCONN_TIMEOUT (2 seconds) is being used to timeout ACL connection. This results in problems with legacy pairing as remote user has only few seconds to enter PIN before ACL is disconnected. Increase disconnect timeout for incomming connection to HCI_PAIRING_TIMEOUT if SSP is disabled and no linkey exists. To avoid keeping ACL alive for too long after SDP search set ACL timeout back to HCI_DISCONN_TIMEOUT when L2CAP is connected. 2012-07-19 13:24:43.413521 < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr 00:02:72:D6:6A:3F ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 2012-07-19 13:24:43.425224 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 2012-07-19 13:24:43.885222 > HCI Event: Role Change (0x12) plen 8 status 0x00 bdaddr 00:02:72:D6:6A:3F role 0x01 Role: Slave 2012-07-19 13:24:44.054221 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 42 bdaddr 00:02:72:D6:6A:3F type ACL encrypt 0x00 2012-07-19 13:24:44.054313 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 42 2012-07-19 13:24:44.055176 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 bdaddr 00:02:72:D6:6A:3F mode 0 2012-07-19 13:24:44.056217 > HCI Event: Max Slots Change (0x1b) plen 3 handle 42 slots 5 2012-07-19 13:24:44.059218 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0 2012-07-19 13:24:44.062192 > HCI Event: Command Status (0x0f) plen 4 Unknown (0x00|0x0000) status 0x00 ncmd 1 2012-07-19 13:24:44.067219 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 42 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 2012-07-19 13:24:44.067248 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 42 page 1 2012-07-19 13:24:44.071217 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 2012-07-19 13:24:44.076218 > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 42 page 1 max 1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 2012-07-19 13:24:44.076249 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 bdaddr 00:02:72:D6:6A:3F mode 2 clkoffset 0x0000 2012-07-19 13:24:44.081218 > HCI Event: Command Status (0x0f) plen 4 Remote Name Request (0x01|0x0019) status 0x00 ncmd 1 2012-07-19 13:24:44.105214 > HCI Event: Remote Name Req Complete (0x07) plen 255 status 0x00 bdaddr 00:02:72:D6:6A:3F name 'uw000951-0' 2012-07-19 13:24:44.105284 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 handle 42 2012-07-19 13:24:44.111207 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 2012-07-19 13:24:44.112220 > HCI Event: Link Key Request (0x17) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.112249 < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.115215 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Negative Reply (0x01|0x000c) ncmd 1 status 0x00 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.116215 > HCI Event: PIN Code Request (0x16) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:48.099184 > HCI Event: Auth Complete (0x06) plen 3 status 0x13 handle 42 Error: Remote User Terminated Connection 2012-07-19 13:24:48.179182 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 42 reason 0x13 Reason: Remote User Terminated Connection Cc: stable@vger.kernel.org Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Refactor in hci_le_conn_complete_evtAndre Guedes
This patch moves the hci_conn check to begining of hci_le_conn_ complete_evt in order to improve code's readability and better error handling. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Lookup hci_conn in hci_le_conn_complete_evtAndre Guedes
This patch does a trivial code refactoring in hci_conn lookup in hci_le_conn_complete_evt. It performs the hci_conn lookup at the begining of the function since it is used by both flows (error and success). Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Find hci_conn by BT_CONNECT stateAndre Guedes
This patch changes hci_cs_le_create_conn to perform hci_conn lookup by state instead of bdaddr. Since we can have only one LE connection in BT_CONNECT state, we can perform LE hci_conn lookup by state. This way, we don't rely on hci_sent_cmd_data helper to find the hci_conn object. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Refactor hci_cs_le_create_connAndre Guedes
This patch does some code refactoring in hci_cs_le_create_conn function. The hci_conn object is only needed in case of failure, therefore hdev locking and hci_conn lookup were moved to if-statement scope. Also, the conn->state check was removed since we should always close the connection if it fails. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Remove unneeded codeAndre Guedes
This patch removes some unneeded code from hci_cs_le_create_conn. If the hci_conn is not found, it means this LE connection attempt was triggered by a thrid-party tool (e.g. hcitool). We should not create this new hci_conn in LE Create Connection command status event since it is already properly handled in LE Connection Complete event. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Fix hci_le_conn_complete_evtAndre Guedes
We need to check the 'Role' parameter from the LE Connection Complete Event in order to properly set 'out' and 'link_mode' fields from hci_conn structure. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Trivial refactoringAndre Guedes
This patch replaces the unlock-and-return statements by the goto statement. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Remove locking in hci_user_passkey_request_evtAndre Guedes
This patch removes hdev locking in hci_user_passkey_request_evt since it is not needed. mgmt_user_passkey_request simply calls mgmt_event which does not require hdev locking at all. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Use lmp_no_flush_capable where applicableAndre Guedes
This patch replaces all LMP_NO_FLUSH bit checking by the helper macro lmp_no_flush_capable. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Use lmp_sniffsubr_capable where applicableAndre Guedes
This patch replaces all LMP_SNIFF_SUBR bit checking by the helper macro lmp_sniffsubr_capable. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Use lmp_sniff_capable where applicableAndre Guedes
This patch replaces all LMP_SNIFF bit checking by the helper macro lmp_sniff_capable. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Use lmp_rswitch_capable where applicableAndre Guedes
This patch replaces all LMP_RSWITCH bit checking by the helper macro lmp_rswitch_capable. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Use lmp_esco_capable where applicableAndre Guedes
This patch replaces all LMP_ESCO bit checking by the helper macro lmp_esco_capable. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Use lmp_ssp_capable where applicableAndre Guedes
This patch replaces all LMP_SIMPLE_PAIR bit checking by the helper macro lmp_ssp_capable. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Use lmp_le_capable where applicableAndre Guedes
This patch replaces all LMP_LE bit checking by the helper macro lmp_le_capable. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-11Bluetooth: debug: Use standard hex object specifiers in hci_eventAndrei Emeltchenko
To help debugging printed hex object use standard bluetooth specifiers in hci_event. The patch changes format from 0x%04x to 0x%4.4x; print manufacturer id and handle in hex instead of int; print opcode always in 0x%4.4x format; status in 0x%2.2x. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-11Merge branch 'for-upstream' of ↵Gustavo Padovan
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Conflicts: net/bluetooth/hci_event.c
2012-06-08Bluetooth: Add support for encryption key refreshJohan Hedberg
With LE/SMP the completion of a security level elavation from medium to high is indicated by a HCI Encryption Key Refresh Complete event. The necessary behavior upon receiving this event is a mix of what's done for auth_complete and encryption_change, which is also where most of the event handling code has been copied from. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Fix not removing hci_conn for failed LE connectionAndrzej Kaczmarek
This patch changes way LE Connection Complete event with error status are handled. BDADDR returned in such event packet do not need to be valid and should not be used to search for existing hci_conn. Instead, any hci_conn with BT_CONNECT state should be matched since there can be only one pending LE outgoing connection at any time. If not handled properly, appriopriate hci_conn will not be removed and subsequent connection to given peer will try to reuse it without making actual connection attempt. 2012-05-07 11:21:39.133378 < HCI Command: LE Create Connection (0x08|0x000d) plen 25 bdaddr 00:22:D0:10:13:EE type 1 2012-05-07 11:21:39.138774 > HCI Event: Command Status (0x0f) plen 4 LE Create Connection (0x08|0x000d) status 0x00 ncmd 1 2012-05-07 11:21:44.752854 < HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0 2012-05-07 11:21:44.759475 > HCI Event: Command Complete (0x0e) plen 4 LE Create Connection Cancel (0x08|0x000e) ncmd 1 2012-05-07 11:21:44.764479 > HCI Event: LE Meta Event (0x3e) plen 19 LE Connection Complete status 0x02 handle 0, role master bdaddr 00:00:00:00:00:00 (Public) [14898.739425] [6603] hci_connect: hci0 dst 00:22:D0:10:13:EE [14898.739429] [6603] hci_conn_add: hci0 dst 00:22:D0:10:13:EE [14898.739434] [6603] hci_conn_init_sysfs: conn ffff880079f03000 [14898.739440] [6603] hci_send_cmd: hci0 opcode 0x200d plen 25 [14898.739443] [6603] hci_send_cmd: skb len 28 [14898.739487] [6603] hci_chan_create: hci0 conn ffff880079f03000 ... [14938.860231] [55] hci_send_cmd: hci0 opcode 0x200e plen 0 ... [14938.876427] [55] hci_le_conn_complete_evt: hci0 status 2 [14938.876433] [55] hci_conn_add: hci0 dst 00:00:00:00:00:00 [14938.876439] [55] hci_conn_init_sysfs: conn ffff88007aeff800 [14938.876454] [55] hci_send_to_control: len 14 [14938.876470] [55] l2cap_connect_cfm: hcon ffff88007aeff800 bdaddr 00:00:00:00:00:00 status 2 [14938.876474] [55] hci_conn_del: hci0 conn ffff88007aeff800 handle 0 Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Acked-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Use __constant modifier in HCI codeAndrei Emeltchenko
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Use lmp_ssp_capable() macroGustavo Padovan
Make the check more user friendly. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Remove unnecessary headers includeGustavo Padovan
Most of the include were unnecessary or already included by some other header. Replace module.h by export.h where possible. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Fix coding style in the subsystemGustavo Padovan
This is some leftover from the last patches that fixed style. It is mostly line over 80 characters fixes reported by checkpatch.pl. checkpatch.pl is clean for these files now. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Remove most of the inline usageGustavo Padovan
Only obvious cases were left as inline, mostly oneline functions. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Use defined link key sizeAndrei Emeltchenko
Remove magic number with defined link key size. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Fix coding style in hci_event.cGustavo Padovan
Follow the net subsystem rules. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-05-16Bluetooth: Report proper error number in disconnectionGustavo Padovan
If encryption change fails we should disconnect with auth failure error code. Signed-off-by: Gustavo Padovan <gustavo@padovan.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-05-16Bluetooth: Fix EIR data generation for mgmt_device_foundVishal Agarwal
The mgmt_device_found function expects to receive only the significant part of the EIR data so it needs to be removed before calling the function. This patch adds a new eir_get_length() helper function to calculate the length of the significant part. Signed-off-by: Vishal Agarwal <vishal.agarwal@stericsson.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-05-16Bluetooth: Fix Inquiry with RSSI event maskJohan Hedberg
The right bit for "Inquiry with RSSI" is 0x02 and not 0x04 (which means "Read Remote Extended Features Complete"). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-05-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothGustavo Padovan
2012-05-14Bluetooth: mgmt: Fix device_connected sending orderJohan Hedberg
The mgmt_ev_device_connected signal must be sent before any event indications happen for sockets associated with the connection. Otherwise e.g. device authorization for the sockets will fail with ENOTCONN as user space things that there is no baseband link. This patch fixes the issue by ensuring that the device_connected event if sent (if it hasn't been so already) as soon as the first ACL data packet arrives from the remote device. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-27 17:24:50 +0000