summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2013-04-15net: add dev_uc_sync_multiple() and dev_mc_sync_multiple() apiVlad Yasevich
The current implementation of dev_uc_sync/unsync() assumes that there is a strict 1-to-1 relationship between the source and destination of the sync. In other words, once an address has been synced to a destination device, it will not be synced to any other device through the sync API. However, there are some virtual devices that aggreate a number of lower devices and need to sync addresses to all of them. The current API falls short there. This patch introduces a new dev_uc_sync_multiple() api that can be called in the above circumstances and allows sync to work for every invocation. CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-15net: sctp: minor: make sctp_ep_common's member 'dead' a boolDaniel Borkmann
Since dead only holds two states (0,1), make it a bool instead of a 'char', which is more appropriate for its purpose. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-15net: sctp: remove sctp_ep_common struct member 'malloced'Daniel Borkmann
There is actually no need to keep this member in the structure, because after init it's always 1 anyway, thus always kfree called. This seems to be an ancient leftover from the very initial implementation from 2.5 times. Only in case the initialization of an association fails, we leave base.malloced as 0, but we nevertheless kfree it in the error path in sctp_association_new(). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-15esp4: fix error return code in esp_output()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-15bridge: make user modified path cost stickystephen hemminger
Keep a STP port path cost value if it was set by a user. Don't replace it with the link-speed based path cost whenever the link goes down and comes back up. Reported-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-14Merge 3.9-rc7 intp tty-nextGreg Kroah-Hartman
We want the fixes here. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-14net: tcp_memcontrol: minor: remove unused variableDaniel Borkmann
Commit 10b96f7306e5 (``tcp_memcontrol: remove a redundant statement in tcp_destroy_cgroup()'') says ``We read the value but make no use of it.'', but forgot to remove the variable declaration as well. This was a follow-up commit of 3f1346193 (``memcg: decrement static keys at real destroy time'') that removed the read of variable 'val'. This fixes therefore: CC net/ipv4/tcp_memcontrol.o net/ipv4/tcp_memcontrol.c: In function ‘tcp_destroy_cgroup’: net/ipv4/tcp_memcontrol.c:67:6: warning: unused variable ‘val’ [-Wunused-variable] Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-14net: sock: make sock_tx_timestamp voidDaniel Borkmann
Currently, sock_tx_timestamp() always returns 0. The comment that describes the sock_tx_timestamp() function wrongly says that it returns an error when an invalid argument is passed (from commit 20d4947353be, ``net: socket infrastructure for SO_TIMESTAMPING''). Make the function void, so that we can also remove all the unneeded if conditions that check for such a _non-existant_ error case in the output path. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-14ipv6: statically link register_inet6addr_notifier()Cong Wang
Tomas reported the following build error: net/built-in.o: In function `ieee80211_unregister_hw': (.text+0x10f0e1): undefined reference to `unregister_inet6addr_notifier' net/built-in.o: In function `ieee80211_register_hw': (.text+0x10f610): undefined reference to `register_inet6addr_notifier' make: *** [vmlinux] Error 1 when built IPv6 as a module. So we have to statically link these symbols. Reported-by: Tomas Melin <tomas.melin@iki.fi> Cc: Tomas Melin <tomas.melin@iki.fi> Cc: "David S. Miller" <davem@davemloft.net> Cc: YOSHIFUJI Hidaki <yoshfuji@linux-ipv6.org> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-14SUNRPC: Allow rpc_create() to request that TCP slots be unlimitedTrond Myklebust
This is mainly for use by NFSv4.1, where the session negotiation ultimately wants to decide how many RPC slots we can fill. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-04-14SUNRPC: Fix a livelock problem in the xprt->backlog queueTrond Myklebust
This patch ensures that we throttle new RPC requests if there are requests already waiting in the xprt->backlog queue. The reason for doing this is to fix livelock issues that can occur when an existing (high priority) task is waiting in the backlog queue, gets woken up by xprt_free_slot(), but a new task then steals the slot. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-04-13tcp: tcp_tso_segment() small optimizationEric Dumazet
We can move th->check computation out of the loop, as compiler doesn't know each skb initially share same tcp headers after skb_segment() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-12tcp: GSO should be TSQ friendlyEric Dumazet
I noticed that TSQ (TCP Small queues) was less effective when TSO is turned off, and GSO is on. If BQL is not enabled, TSQ has then no effect. It turns out the GSO engine frees the original gso_skb at the time the fragments are generated and queued to the NIC. We should instead call the tcp_wfree() destructor for the last fragment, to keep the flow control as intended in TSQ. This effectively limits the number of queued packets on qdisc + NIC layers. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-12TTY: ircomm: fix DTR being raised on hang upJohan Hovold
Make sure to check ASYNC_INITIALISED before raising DTR when waking up from blocked open in ircomm_tty_block_til_ready. Currently DTR could get raised at hang up as a blocked process would raise DTR unconditionally before checking for hang up and returning. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-12act_csum: fix possible use after freeEric Dumazet
tcf_csum_skb_nextlayer() / pskb_may_pull() can change skb->head, so we must be careful not keeping pointers to previous headers. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Grégoire Baron <baronchon@n7mm.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-12net/802/mrp: fix possible race condition when calling mrp_pdu_queue()David Ward
(Adapted from a very similar change to net/802/garp.c by Cong Wang.) mrp_pdu_queue() should ways be called with the applicant spin lock. mrp_uninit_applicant() only holds the rtnl lock which is not enough; a race is possible because mrp_rcv() is called in BH context: mrp_rcv() |->mrp_pdu_parse_msg() |->mrp_pdu_parse_vecattr() |->mrp_pdu_parse_vecattr_event() |-> mrp_attr_event() |-> mrp_pdu_append_vecattr_event() |-> mrp_pdu_queue() Cc: Cong Wang <amwang@redhat.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David Ward <david.ward@ll.mit.edu> Acked-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-12Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf into netfilter Pablo Neira Ayuso says: ==================== The following patchset contains late netfilter fixes for your net tree, they are: * Don't drop segmented TCP packets in the SIP helper, we've got reports from users that this was breaking communications when the SIP phone messages are larger than the MTU, from Patrick McHardy. * Fix refcount leak in the ipset list set, from Jozsef Kadlecsik. * On hash set resizing, the nomatch flag was lost, thus entirely inverting the logic of the set matching, from Jozsef Kadlecsik. * Fix crash on NAT modules removal. Timer expiration may race with the module cleanup exit path while deleting conntracks, from Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-12Merge branch 'for-john' of ↵John W. Linville
git://x-git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-04-12NFC: RFKILL supportSamuel Ortiz
All NFC devices will now get proper RFKILL support as long as they provide some dev_up and dev_down hooks. Rfkilling an NFC device will bring it down while it is left to userspace to bring it back up when being rfkill unblocked. This is very similar to what Bluetooth does. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-12rfkill: Add NFC to the list of supported radiosSamuel Ortiz
And return the proper string for it. Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-12netfilter: nf_nat: fix race when unloading protocol modulesFlorian Westphal
following oops was reported: RIP: 0010:[<ffffffffa03227f2>] [<ffffffffa03227f2>] nf_nat_cleanup_conntrack+0x42/0x70 [nf_nat] RSP: 0018:ffff880202c63d40 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8801ac7bec28 RCX: ffff8801d0eedbe0 RDX: dead000000200200 RSI: 0000000000000011 RDI: ffffffffa03265b8 [..] Call Trace: [..] [<ffffffffa02febed>] destroy_conntrack+0xbd/0x110 [nf_conntrack] Happens when a conntrack timeout expires right after first part of the nat cleanup has completed (bysrc hash removal), but before part 2 has completed (re-initialization of nat area). [ destroy callback tries to delete bysrc again ] Patrick suggested to just remove the affected conntracks -- the connections won't work properly anyway without nat transformation. So, lets do that. Reported-by: CAI Qian <caiqian@redhat.com> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-12Revert "netprio_cgroup: make local table static"David S. Miller
This reverts commit 763eff57de893a27f8f18855f17033c92598c423. It causes build regressions, as per Stephen Rothwell: ==================== After merging the final tree, today's linux-next build (powerpc allyesconfig) failed like this: net/core/netprio_cgroup.c:250:29: error: static declaration of 'net_prio_subsys' follows non-static declaration include/linux/cgroup_subsys.h:71:1: note: previous declaration of 'net_prio_subsys' was here ==================== Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-11tcp: Reallocate headroom if it would overflow csum_startThomas Graf
If a TCP retransmission gets partially ACKed and collapsed multiple times it is possible for the headroom to grow beyond 64K which will overflow the 16bit skb->csum_start which is based on the start of the headroom. It has been observed rarely in the wild with IPoIB due to the 64K MTU. Verify if the acking and collapsing resulted in a headroom exceeding what csum_start can cover and reallocate the headroom if so. A big thank you to Jim Foraker <foraker1@llnl.gov> and the team at LLNL for helping out with the investigation and testing. Reported-by: Jim Foraker <foraker1@llnl.gov> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-11Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== 1) Allow to avoid copying DSCP during encapsulation by setting a SA flag. From Nicolas Dichtel. 2) Constify the netlink dispatch table, no need to modify it at runtime. From Mathias Krause. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-11tcp: incoming connections might use wrong route under synfloodDmitry Popov
There is a bug in cookie_v4_check (net/ipv4/syncookies.c): flowi4_init_output(&fl4, 0, sk->sk_mark, RT_CONN_FLAGS(sk), RT_SCOPE_UNIVERSE, IPPROTO_TCP, inet_sk_flowi_flags(sk), (opt && opt->srr) ? opt->faddr : ireq->rmt_addr, ireq->loc_addr, th->source, th->dest); Here we do not respect sk->sk_bound_dev_if, therefore wrong dst_entry may be taken. This dst_entry is used by new socket (get_cookie_sock -> tcp_v4_syn_recv_sock), so its packets may take the wrong path. Signed-off-by: Dmitry Popov <dp@highloadlab.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-11Bluetooth: Reject SCO when hci connection timeoutsClaudio Takahasi
This patch sends Reject Synchronous Connection Request Command when hci_conn_timeout is triggered, and the SCO connection is in BT_CONNECT2 state. It prevents inconsistency if the remote host doesn't implement properly the timeout for the connection request, and it removes the connection reference left when the socket is closed for incoming SCO connections. [ 2650.129080] sco_sock_release: sock ffff8801ca417400, sk ffff88020c408800 [ 2650.129092] sco_sock_clear_timer: sock ffff88020c408800 state 6 [ 2650.129101] __sco_sock_close: sk ffff88020c408800 state 6 socket ffff8801ca417400 [ 2650.129108] sco_chan_del: sk ffff88020c408800, conn ffff8801c650ea20, err 104 [ 2650.129114] hci_conn_put: hcon ffff88020c40a800 orig refcnt 1 [ 2650.129128] sco_sock_kill: sk ffff88020c408800 state 9 [ 2650.129135] sco_sock_destruct: sk ffff88020c408800 [ 2650.138468] hci_conn_timeout: hcon ffff88020c40a800 state BT_CONNECT2 Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-11Bluetooth: Remove unneeded parameterClaudio Takahasi
This patch removes the status parameter of the l2cap_conn_add function. The parameter 'status' is always 0. Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-11Bluetooth: Minor coding style fixClaudio Takahasi
This patch removes unneeded initialization and empty line. Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-11Bluetooth: Use GFP_KERNEL in sco_conn_addClaudio Takahasi
This patch changes the memory allocation flags in the sco_conn_add function, replacing the type to GFP_KERNEL. This function is executed in process context and it is not called inside an atomic section. Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-11Bluetooth: Fix SCO connection referenceClaudio Takahasi
This patch fixes decrementing SCO connection reference right after stablishing the SCO connection with defer setup enabled. The dump below shows a disconnection command with handle 0, the connection is still in BT_CONNECT2 state and there isn't a handle associated with it. < HCI Command: Accept Synchronous Connection (0x01|0x0029) plen 21 bdaddr 78:47:1D:B3:72:6C > HCI Event: Command Status (0x0f) plen 4 Accept Synchronous Connection (0x01|0x0029) status 0x00 ncmd 1 < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 0 reason 0x13 Reason: Remote User Terminated Connection > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x00 handle 46 bdaddr 78:47:1D:B3:72:6C type eSCO Air mode: CVSD < SCO data: handle 46 flags 0x00 dlen 48 Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-11Bluetooth: rename hci_conn_put to hci_conn_dropDavid Herrmann
We use _get() and _put() for device ref-counting in the kernel. However, hci_conn_put() is _not_ used for ref-counting, hence, rename it to hci_conn_drop() so we can later fix ref-counting and introduce hci_conn_put(). hci_conn_hold() and hci_conn_put() are currently used to manage how long a connection should be held alive. When the last user drops the connection, we spawn a delayed work that performs the disconnect. Obviously, this has nothing to do with ref-counting for the _object_ but rather for the keep-alive of the connection. But we really _need_ proper ref-counting for the _object_ to allow connection-users like rfcomm-tty, HIDP or others. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-11NFC: Prevent polling when device is downSamuel Ortiz
Some devices turn radio on whenever they're asked to start a poll. To prevent that from happening, we just don't call into the driver start_poll hook when the NFC device is down. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: llcp: Terminate connection when receiving a DISC on (0,0)Samuel Ortiz
According to the LLCP specs, we must terminate the LLCP link when receiving a DISC with both ssap and dsap set to 0. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: llcp: Remove local_cleanup last argumentSamuel Ortiz
local_cleanup is always called with device set to false as it means the local LLCP is going away. So no need to pass this switch as an argument. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: llcp: Only keep raw sockets alive when the LLCP local leavesSamuel Ortiz
When the MAC goes down, connected and connection less sockets should be notified, but raw sockets should be kept alive. They will get notified only when the physical devices goes away. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: llcp: Add support in getsockopt for RW, LTO, and MIU remote parametersThierry Escande
Useful for LLCP validation tests. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: llcp: Reset RW, LTO, and MIU remote parameters when link goes downThierry Escande
This resets remote parameters in both local and socket llcp structures when the link goes down. That way, nfc_llcp_getsockopt won't return values corresponding to the previous link parameters. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: llcp: Use localy stored remote_miu value if not set at socket levelThierry Escande
If remote_miu value is not set in the socket (i.e. connection-less socket) the value stored in the local is used. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: llcp: Aggregated frames supportThierry Escande
This adds support for AGF PDUs. For each PDU contained in the AGF, a new sk_buff is allocated and dispatched to its corresponding handler. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: llcp: Fix zero octets length SDU handlingOlivier Guiter
LLCP Validation test #2 (Connection-less information transfer) send a service data unit of zero octets length. This is now handled correctly. Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: llcp: Fall back to local values when getting socket optionsSamuel Ortiz
If a socket option has not been set by the user, fall back to the LLCP local ones. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: llcp: Socket miux is a big endian fieldSamuel Ortiz
The MIUX must be transmitted in big endian and as such we have to convert it properly. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11mac80211: always pick a basic rate to tx RTS/CTS for pre-HT ratesKarl Beldan
When the 1st rate control entry is a pre-HT rate we want to set rts_cts_rate_idx "as the fastest basic rate that is not faster than the data rate"(code comments). But in case some bss allowed rate indexes are lower than the lowest bss basic rate, if the rate control selects a rate among the formers for its 1st rate control entry, rts_cts_rate_idx remains 0 and is not a basic rate index. This commit sets rts_cts_rate_idx to the lowest bss basic rate index in this situation. Note that the code assumes that lowest indexes == lowest bitrates. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-11mac80211: fix ieee80211_queue_stopped()Thomas Pedersen
Johannes Berg notes mac80211 drivers which use ieee80211_queue_stopped() really only want to know if they previously requested a queue stop. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-10netprio_cgroup: make local table staticstephen hemminger
Minor sparse warning Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-10openvswitch: datapath.h: Fix a stale comment.Andy Zhou
Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) cfg80211_conn_scan() must be called with the sched_scan_mutex, fix from Artem Savkov. 2) Fix regression in TCP ICMPv6 processing, we do not want to treat redirects as socket errors, from Christoph Paasch. 3) Fix several recvmsg() msg_name kernel memory leaks into userspace, in ATM, AX25, Bluetooth, CAIF, IRDA, s390 IUCV, L2TP, LLC, Netrom, NFC, Rose, TIPC, and VSOCK. From Mathias Krause and Wei Yongjun. 4) Fix AF_IUCV handling of segmented SKBs in recvmsg(), from Ursula Braun and Eric Dumazet. 5) CAN gw.c code does kfree() on SLAB cache memory, use kmem_cache_free() instead. Fix from Wei Yongjun. 6) Fix LSM regression on TCP SYN/ACKs, some LSMs such as SELINUX want an skb->sk socket context available for these packets, but nothing else requires it. From Eric Dumazet and Paul Moore. 7) Fix ipv4 address lifetime processing so that we don't perform sleepable acts inside of rcu_read_lock() sections, do them in an rtnl_lock() section instead. From Jiri Pirko. 8) mvneta driver accidently sets HW features after device registry, it should do so beforehand. Fix from Willy Tarreau. 9) Fix bonding unload races more correctly, from Nikolay Aleksandrov and Veaceslav Falico. 10) rtnl_dump_ifinfo() and rtnl_calcit() invoke nlmsg_parse() with wrong header size argument. Fix from Michael Riesch. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) lsm: add the missing documentation for the security_skb_owned_by() hook bnx2x: Prevent null pointer dereference in AFEX mode e100: Add dma mapping error check selinux: add a skb_owned_by() hook can: gw: use kmem_cache_free() instead of kfree() netrom: fix invalid use of sizeof in nr_recvmsg() qeth: fix qeth_wait_for_threads() deadlock for OSN devices af_iucv: fix recvmsg by replacing skb_pull() function rtnetlink: Call nlmsg_parse() with correct header length bonding: fix bonding_masters race condition in bond unloading Revert "bonding: remove sysfs before removing devices" net: mvneta: enable features before registering the driver hyperv: Fix RNDIS send_completion code path hyperv: Fix a kernel warning from netvsc_linkstatus_callback() net: ipv4: fix schedule while atomic bug in check_lifetime() net: ipv4: reset check_lifetime_work after changing lifetime bnx2x: Fix KR2 rapid link flap sctp: remove 'sridhar' from maintainers list VSOCK: Fix missing msg_namelen update in vsock_stream_recvmsg() VSOCK: vmci - fix possible info leak in vmci_transport_dgram_dequeue() ...
2013-04-10mac80211: fix cfg80211 interaction on auth/assoc requestJohannes Berg
If authentication (or association with FT) is requested by userspace, mac80211 currently doesn't tell cfg80211 that it disconnected from the AP. That leaves inconsistent state: cfg80211 thinks it's connected while mac80211 thinks it's not. Typically this won't last long, as soon as mac80211 reports the new association to cfg80211 the old one goes away. If, however, the new authentication or association doesn't succeed, then cfg80211 will forever think the old one still exists and will refuse attempts to authenticate or associate with the AP it thinks it's connected to. Anders reported that this leads to it taking a very long time to reconnect to a network, or never even succeeding. I tested this with an AP hacked to never respond to auth frames, and one that works, and with just those two the system never recovers because one won't work and cfg80211 thinks it's connected to the other so refuses connections to it. To fix this, simply make mac80211 tell cfg80211 when it is no longer connected to the old AP, while authenticating or associating to a new one. Cc: stable@vger.kernel.org Reported-by: Anders Kaseorg <andersk@mit.edu> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-10mac80211: provide SSID in IBSS modeMarek Puzyniak
Some drivers need SSID in AP and IBSS mode. AP SSID is provided through BSS_CHANGED_SSID notification. There was no easy way to do the same for IBSS. In IBSS mode SSID is known but was not stored in BSS configuration. Extend the AP-mode functionality to also work in IBSS mode. Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-10mac80211: always advertise STBC/MCSes even if no AP supportJohannes Berg
Advertise STBC capabilities and MCS rates even if the AP doesn't support them. This has always been the right thing to do, but used to be problematic with some APs. Now WFA testing requires this so re-enable it, problematic APs would then presumably not pass the test and be fixed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-29 17:52:19 +0000