summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2013-04-10mac80211: clear SSID when stopping APMarek Puzyniak
When AP interface is stopped ssid_len in the BSS configuration isn't cleared which can confuse drivers when switching modes. Set the length to zero when stopping the AP interface. Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-10mac80211: fix recalc_radar hwconf sync problemSimon Wunderlich
local->hw.conf maybe not be synced when recalcing whether radar is enabled, sometimes leaving radar enabled even if it's not neccesary anymore. Fix this by: * setting radar_enabled when creating the chanctx * turning radar_enabled off before destroying the last channel context Reported-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-10mac80211: stringify another plink stateThomas Pedersen
The patch "mac80211: stringify mesh peering events" missed an opportunity to print the peering state as a string. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-10mac80211: unset FC retry bit in mesh fwding pathThomas Pedersen
Otherwise forwarded frames would keep the retry bit set from the previous link transmission. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-10Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/ath/carl9170/debug.c drivers/net/wireless/ath/carl9170/main.c net/mac80211/ieee80211_i.h
2013-04-10kernel: audit: beautify code, for extern function, better to check its ↵Chen Gang
parameters by itself __audit_socketcall is an extern function. better to check its parameters by itself. also can return error code, when fail (find invalid parameters). also use macro instead of real hard code number also give related comments for it. Signed-off-by: Chen Gang <gang.chen@asianux.com> [eparis: fix the return value when !CONFIG_AUDIT] Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-10Merge tag 'nfs-for-3.9-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: - fix for memory corruption issues in nfs4[01]_walk_client_list (stable) - fix for an Oopsable bug in rpc_clone_client (stable) - another state manager deadlock in the NFSv4 open code - memory leaks in nfs4_discover_server_trunking and rpc_new_client * tag 'nfs-for-3.9-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Fix another potential state manager deadlock SUNRPC: Fix a potential memory leak in rpc_new_client NFSv4/4.1: Fix bugs in nfs4[01]_walk_client_list NFSv4: Fix a memory leak in nfs4_discover_server_trunking SUNRPC: Remove extra xprt_put()
2013-04-10Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/rt2x00/rt2x00pci.c net/mac80211/sta_info.c net/wireless/core.h
2013-04-10Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/rt2x00/rt2x00pci.c
2013-04-09netfilter: ipset: hash:*net*: nomatch flag not excluded on set resizeJozsef Kadlecsik
If a resize is triggered the nomatch flag is not excluded at hashing, which leads to the element missed at lookup in the resized set. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-09netfilter: ipset: list:set: fix reference counter updateJozsef Kadlecsik
The last element can be replaced or pushed off and in both cases the reference counter must be updated. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-09bluetooth: fix race in bt_procfs_init()Al Viro
use proc_create_data() rather than set ->data after the file has been created Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09bluetooth: kill unused 'module' argument of bt_procfs_init()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09bluetooth: don't bother with ->owner for procfs fopsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09x25: use proc_remove_subtree()Al Viro
... and don't bother with ->owner, while we are at it - procfs fops do not need it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09procfs: new helper - PDE_DATA(inode)Al Viro
The only part of proc_dir_entry the code outside of fs/proc really cares about is PDE(inode)->data. Provide a helper for that; static inline for now, eventually will be moved to fs/proc, along with the knowledge of struct proc_dir_entry layout. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09Merge branch 'fixes-for-3.9' of git://gitorious.org/linux-can/linux-canDavid S. Miller
Marc Kleine-Budde says: ==================== here's a fix for the v3.9 release cycle, if not too late: Wei Yongjun contributes a patch for the can-gw protocoll. The patch fixes the memory allocated with kmem_cache_alloc(), is now freed using kmem_cache_free(), not kfree(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09selinux: add a skb_owned_by() hookEric Dumazet
Commit 90ba9b1986b5ac (tcp: tcp_make_synack() can use alloc_skb()) broke certain SELinux/NetLabel configurations by no longer correctly assigning the sock to the outgoing SYNACK packet. Cost of atomic operations on the LISTEN socket is quite big, and we would like it to happen only if really needed. This patch introduces a new security_ops->skb_owned_by() method, that is a void operation unless selinux is active. Reported-by: Miroslav Vadkerti <mvadkert@redhat.com> Diagnosed-by: Paul Moore <pmoore@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-security-module@vger.kernel.org Acked-by: James Morris <james.l.morris@oracle.com> Tested-by: Paul Moore <pmoore@redhat.com> Acked-by: Paul Moore <pmoore@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09netprio_cgroup: remove task_struct parameter from sock_update_netprio()Zefan Li
The callers always pass current to sock_update_netprio(). Signed-off-by: Li Zefan <lizefan@huawei.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09cls_cgroup: remove task_struct parameter from sock_update_classid()Zefan Li
The callers always pass current to sock_update_classid(). Signed-off-by: Li Zefan <lizefan@huawei.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09tcp_memcontrol: remove a redundant statement in tcp_destroy_cgroup()Zefan Li
We read the value but make no use of it. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09net: ipv6: only invalidate previously tokenized addressesDaniel Borkmann
Instead of invalidating all IPv6 addresses with global scope when one decides to use IPv6 tokens, we should only invalidate previous tokens and leave the rest intact until they expire eventually (or are intact forever). For doing this less greedy approach, we're adding a bool at the end of inet6_ifaddr structure instead, for two reasons: i) per-inet6_ifaddr flag space is already used up, making it wider might not be a good idea, since ii) also we do not necessarily need to export this information into user space. Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09net: ipv6: also allow token to be set when device not readyDaniel Borkmann
When we set the iftoken in inet6_set_iftoken(), we return -EINVAL when the device does not have flag IF_READY. This is however not necessary and rather an artificial usability barrier, since we simply can set the token despite that, and in case the device is ready, we just send out our rs, otherwise ifup et al. will do this for us anyway. Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09net: ipv6: minor: use in6addr_any in token initDaniel Borkmann
Since we check for !ipv6_addr_any(&in6_dev->token) in addrconf_prefix_rcv(), make the token initialization on device setup more intuitive by using in6addr_any as an initializer. Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09can: gw: use kmem_cache_free() instead of kfree()Wei Yongjun
Memory allocated by kmem_cache_alloc() should be freed using kmem_cache_free(), not kfree(). Cc: linux-stable <stable@vger.kernel.org> # >= v3.2 Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-04-08netrom: fix invalid use of sizeof in nr_recvmsg()Wei Yongjun
sizeof() when applied to a pointer typed expression gives the size of the pointer, not that of the pointed data. Introduced by commit 3ce5ef(netrom: fix info leak via msg_name in nr_recvmsg) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08af_iucv: fix recvmsg by replacing skb_pull() functionUrsula Braun
When receiving data messages, the "BUG_ON(skb->len < skb->data_len)" in the skb_pull() function triggers a kernel panic. Replace the skb_pull logic by a per skb offset as advised by Eric Dumazet. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08rtnetlink: Call nlmsg_parse() with correct header lengthMichael Riesch
Signed-off-by: Michael Riesch <michael.riesch@omicron.at> Cc: "David S. Miller" <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Benc <jbenc@redhat.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: linux-kernel@vger.kernel.org Acked-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08net: ipv6: add tokenized interface identifier supportDaniel Borkmann
This patch adds support for IPv6 tokenized IIDs, that allow for administrators to assign well-known host-part addresses to nodes whilst still obtaining global network prefix from Router Advertisements. It is currently in draft status. The primary target for such support is server platforms where addresses are usually manually configured, rather than using DHCPv6 or SLAAC. By using tokenised identifiers, hosts can still determine their network prefix by use of SLAAC, but more readily be automatically renumbered should their network prefix change. [...] The disadvantage with static addresses is that they are likely to require manual editing should the network prefix in use change. If instead there were a method to only manually configure the static identifier part of the IPv6 address, then the address could be automatically updated when a new prefix was introduced, as described in [RFC4192] for example. In such cases a DNS server might be configured with such a tokenised interface identifier of ::53, and SLAAC would use the token in constructing the interface address, using the advertised prefix. [...] http://tools.ietf.org/html/draft-chown-6man-tokenised-ipv6-identifiers-02 The implementation is partially based on top of Mark K. Thompson's proof of concept. However, it uses the Netlink interface for configuration resp. data retrival, so that it can be easily extended in future. Successfully tested by myself. Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-04-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-04-08mac802154: Keep track of the channel when changedAlan Ott
Two sections checked whether the current channel != the new channel without ever setting the current channel variables. 1. net/mac802154/tx.c: Prevent set_channel() from getting called every time a packet is sent. 2. net/mac802154/mib.c: Lock (pib_lock) accesses to current_channel and current_page and make sure they are updated when the channel has been changed. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08TTY: ircomm, use GFP_KERNEL in ircomm_open()Mathias Krause
Hi Greg, I'm unsure if you or Dave should take that one as it's for one a TTY patch but also living under net/. So I'm uncertain and let you decide! Thanks, Mathias -- >8 -- Subject: [PATCH] TTY: ircomm, use GFP_KERNEL in ircomm_open() We're clearly running in non-atomic context as our only call site is able to call wait_event_interruptible(). So we're safe to use GFP_KERNEL here instead of GFP_ATOMIC. Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08irda: use GFP_KERNEL in irda_connect_response()Mathias Krause
The only call site of irda_connect_response() is irda_accept() -- a function called from user context only. Therefore it has no need for GFP_ATOMIC. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08irda: use GFP_KERNEL in irda_create()Mathias Krause
irda_create() is called from user context only, therefore has no need for GFP_ATOMIC. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08net: ipv4: fix schedule while atomic bug in check_lifetime()Jiri Pirko
move might_sleep operations out of the rcu_read_lock() section. Also fix iterating over ifa_dev->ifa_list Introduced by: commit 5c766d642bcaf "ipv4: introduce address lifetime" Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08net: ipv4: reset check_lifetime_work after changing lifetimeJiri Pirko
This will result in calling check_lifetime in nearest opportunity and that function will adjust next time to call check_lifetime correctly. Without this, check_lifetime is called in time computed by previous run, not affecting modified lifetime. Introduced by: commit 5c766d642bcaf "ipv4: introduce address lifetime" Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08ip_gre: fix a possible crash in parse_gre_header()Eric Dumazet
pskb_may_pull() can change skb->head, so we must init iph/greh after calling it. Bug added in commit c54419321455 (GRE: Refactor GRE tunneling code.) Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08ieee802154/nl-mac.c: make some MLME operations optionalWerner Almesberger
Check for NULL before calling the following operations from "struct ieee802154_mlme_ops": assoc_req, assoc_resp, disassoc_req, start_req, and scan_req. This fixes a current oops where those functions are called but not implemented. It also updates the documentation to clarify that they are now optional by design. If a call to an unimplemented function is attempted, the kernel returns EOPNOTSUPP via netlink. The following operations are still required: get_phy, get_pan_id, get_short_addr, and get_dsn. Note that the places where this patch changes the initialization of "ret" should not affect the rest of the code since "ret" was always set (again) before returning its value. Signed-off-by: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08mac80211: fix LED in idle handlingJohannes Berg
feng xiangjun reports that my commit 382a103b2b528a3085cde4ac56fc69d92a828b72 Author: Johannes Berg <johannes.berg@intel.com> Date: Fri Mar 22 22:30:09 2013 +0100 mac80211: fix idle handling sequence broke the wireless status LED. The reason is that we now call ieee80211_idle_off() when the channel context is assigned, and that doesn't recalculate the LED state. Fix this by making that function a wrapper around most of idle recalculation while forcing active. Reported-by: feng xiangjun <fengxj325@gmail.com> Tested-by: feng xiangjun <fengxj325@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08netfilter: nat: propagate errors from xfrm_me_harder()Patrick McHardy
Propagate errors from ip_xfrm_me_harder() instead of returning EPERM in all cases. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-08netfilter: ipv6: propagate routing errors from ip6_route_me_harder()Patrick McHardy
Propagate routing errors from ip_route_me_harder() when dropping a packet using NF_DROP_ERR(). This makes userspace get the proper error instead of EPERM for everything. # ip -6 r a unreachable default table 100 # ip -6 ru add fwmark 0x1 lookup 100 # ip6tables -t mangle -A OUTPUT -d 2001:4860:4860::8888 -j MARK --set-mark 0x1 Old behaviour: PING 2001:4860:4860::8888(2001:4860:4860::8888) 56 data bytes ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted New behaviour: PING 2001:4860:4860::8888(2001:4860:4860::8888) 56 data bytes ping: sendmsg: Network is unreachable ping: sendmsg: Network is unreachable ping: sendmsg: Network is unreachable Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-08netfilter: ipv4: propagate routing errors from ip_route_me_harder()Patrick McHardy
Propagate routing errors from ip_route_me_harder() when dropping a packet using NF_DROP_ERR(). This makes userspace get the proper error instead of EPERM for everything. Example: # ip r a unreachable default table 100 # ip ru add fwmark 0x1 lookup 100 # iptables -t mangle -A OUTPUT -d 8.8.8.8 -j MARK --set-mark 0x1 Current behaviour: PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted New behaviour: PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ping: sendmsg: Network is unreachable ping: sendmsg: Network is unreachable ping: sendmsg: Network is unreachable ping: sendmsg: Network is unreachable Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-08mac80211: make ieee802_11_parse_elems an inlineJohannes Berg
This (slightly) reduces the code size. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: don't start new netdev queues if driver stoppedJohannes Berg
If a new netdev (e.g. an AP VLAN) is created while the driver has queues stopped, the new netdev queues will be started even though they shouldn't. This will lead to frames accumulating on the internal mac80211 pending queues instead of properly being held on the netdev queues. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: replace some dead code by a warningJohannes Berg
Given the (nested) switch statements, this code can't be reached, so make it warn instead of manipulating the carrier state which seems purposeful. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: don't fiddle with netdev queues in MLME codeJohannes Berg
The netdev queues should always represent the state that the driver gave them, so fiddling with them isn't really appropriate in the mlme code. Also, since we stop queues for flushing now, this really isn't necessary any more. As the scan/offchannel code has also been modified to no longer do this a while ago, remove the outdated smp_mb() and comments about it. While at it, also add a pair of braces that was missing. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: disable uAPSD if all ACs are under ACMAlexander Bondar
It's unlikely that an AP requires WMM mandatory admission control for all access categories, and if it does then we still transmit on the background AC without requesting admission. However, avoid using uAPSD in this case since the implementation could run into issues and might use other ACs etc. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: fix do_stop handling while suspendedJohannes Berg
When a device is unplugged while suspended, mac80211 is de-initialized and all interfaces are removed while no state is actually present in the driver. This can cause warnings and driver confusion. Fix this by reordering the do_stop code to not call the driver when it is suspended, i.e. when there's no state in the driver anyway. The previous patches removed a few corner cases in ROC and virtual monitor interfaces so that now this is safe to do and no state should be left over. Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: destroy virtual monitor interface across suspendJohannes Berg
It has to be removed from the driver, but completely destroying it helps handle unplug of a device during suspend since then the channel context handling etc. doesn't have to happen later when it's removed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-31 18:18:51 +0000