summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2015-10-13netfilter: ipv6: whitespace around operatorsIan Morris
This patch cleanses whitespace around arithmetical operators. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-13netfilter: ipv6: code indentationIan Morris
Use tabs instead of spaces to indent code. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-13netfilter: ip6_tables: function definition layoutIan Morris
Use tabs instead of spaces to indent second line of parameters in function definitions. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-13netfilter: ip6_tables: label placementIan Morris
Whitespace cleansing: Labels should not be indented. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-13netfilter: sync with packet rx also after removing queue entriesFlorian Westphal
We need to sync packet rx again after flushing the queue entries. Otherwise, the following race could happen: cpu1: nf_unregister_hook(H) called, H unliked from lists, calls synchronize_net() to wait for packet rx completion. Problem is that while no new nf_queue_entry structs that use H can be allocated, another CPU might receive a verdict from userspace just before cpu1 calls nf_queue_nf_hook_drop to remove this entry: cpu2: receive verdict from userspace, lock queue cpu2: unlink nf_queue_entry struct E, which references H, from queue list cpu1: calls nf_queue_nf_hook_drop, blocks on queue spinlock cpu2: unlock queue cpu1: nf_queue_nf_hook_drop drops affected queue entries cpu2: call nf_reinject for E cpu1: kfree(H) cpu2: potential use-after-free for H Cc: Eric W. Biederman <ebiederm@xmission.com> Fixes: 085db2c04557 ("netfilter: Per network namespace netfilter hooks.") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-13bridge: vlan: move back vlan_flushNikolay Aleksandrov
Ido Schimmel reported a problem with switchdev devices because of the order change of del_nbp operations, more specifically the move of nbp_vlan_flush() which deletes all vlans and frees vlgrp after the rx_handler has been unregistered. So in order to fix this move vlan_flush back where it was and make it destroy the rhtable after NULLing vlgrp and waiting a grace period to make sure noone can see it. Reported-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13bridge: vlan: drop unnecessary flush codeNikolay Aleksandrov
As Ido Schimmel pointed out the vlan_vid_del() code in nbp_vlan_flush is unnecessary (and is actually a remnant of the old vlan code) so we can remove it. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13bridge: vlan: use rcu for vlan_list traversal in br_fill_ifinfoNikolay Aleksandrov
br_fill_ifinfo is called by br_ifinfo_notify which can be called from many contexts with different locks held, sometimes it relies upon bridge's spinlock only which is a problem for the vlan code, so use explicitly rcu for that to avoid problems. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13bridge: vlan: use proper rcu for the vlgrp memberNikolay Aleksandrov
The bridge and port's vlgrp member is already used in RCU way, currently we rely on the fact that it cannot disappear while the port exists but that is error-prone and we might miss places with improper locking (either RCU or RTNL must be held to walk the vlan_list). So make it official and use RCU for vlgrp to catch offenders. Introduce proper vlgrp accessors and use them consistently throughout the code. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13net: Add VRF support to IPv6 stackDavid Ahern
As with IPv4 support for VRFs added to IPv6 stack by replacing hardcoded table ids with possibly device specific ones and manipulating the oif in the flowi6. The flow flags are used to skip oif compare in nexthop lookups if the device is enslaved to a VRF via the L3 master device. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13net: Export fib6_get_table and nd_tblDavid Ahern
Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13ipv6: Don't call with rt6_uncached_list_flush_devEric W. Biederman
As originally written rt6_uncached_list_flush_dev makes no sense when called with dev == NULL as it attempts to flush all uncached routes regardless of network namespace when dev == NULL. Which is simply incorrect behavior. Furthermore at the point rt6_ifdown is called with dev == NULL no more network devices exist in the network namespace so even if the code in rt6_uncached_list_flush_dev were to attempt something sensible it would be meaningless. Therefore remove support in rt6_uncached_list_flush_dev for handling network devices where dev == NULL, and only call rt6_uncached_list_flush_dev when rt6_ifdown is called with a network device. Fixes: 8d0b94afdca8 ("ipv6: Keep track of DST_NOCACHE routes in case of iface down/unregister") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Reviewed-by: Martin KaFai Lau <kafai@fb.com> Tested-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13bridge: fix gc_timer mod/del race conditionNikolay Aleksandrov
commit c62987bbd8a1 ("bridge: push bridge setting ageing_time down to switchdev") introduced a timer race condition because the gc_timer can get rearmed after it's supposedly stopped and flushed in br_dev_delete() leading to a use of freed memory. So take rtnl to sync with bridge destruction when setting ageing_timer. Here's the trace reproduced with these two commands running in parallel: while :; do echo 10000 > /sys/class/net/br0/bridge/ageing_timer; done; while :; do brctl addbr br0; ip l set br0 up; ip l set br0 down; brctl delbr br0; done; [ 300.000029] BUG: unable to handle kernel paging request at ffffffff811c59d3 [ 300.000263] IP: [<ffffffff810f168e>] __internal_add_timer+0x2e/0xd0 [ 300.000422] PGD 1a0f067 PUD 1a10063 PMD 10001e1 [ 300.000639] Oops: 0003 [#1] SMP [ 300.000793] Modules linked in: bridge stp llc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd snd_hda_codec_generic qxl drm_kms_helper psmouse pcspkr ttm snd_hda_intel 9pnet_virtio evdev serio_raw joydev snd_hda_codec 9pnet virtio_balloon drm snd_hwdep virtio_console snd_hda_core pvpanic snd_pcm i2c_piix4 snd_timer acpi_cpufreq parport_pc snd parport soundcore button processor i2c_core ipv6 autofs4 hid_generic usbhid hid ext4 crc16 mbcache jbd2 sg sr_mod cdrom ata_generic virtio_blk virtio_net e1000 ehci_pci uhci_hcd ehci_hcd usbcore usb_common floppy ata_piix libata virtio_pci virtio_ring virtio scsi_mod [ 300.004008] CPU: 1 PID: 1169 Comm: bash Not tainted 4.3.0-rc3+ #46 [ 300.004008] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 300.004008] task: ffff880035be2200 ti: ffff88003795c000 task.ti: ffff88003795c000 [ 300.004008] RIP: 0010:[<ffffffff810f168e>] [<ffffffff810f168e>] __internal_add_timer+0x2e/0xd0 [ 300.004008] RSP: 0018:ffff88003fd03e78 EFLAGS: 00010046 [ 300.004008] RAX: ffff88003fd0ef60 RBX: 840fc78949c08548 RCX: 00000001ffffffff [ 300.004008] RDX: 0000000000000000 RSI: ffffffff811c59d3 RDI: ffff88003fd0df00 [ 300.004008] RBP: ffff88003fd03e78 R08: 00000000ffffffff R09: 0000000000000000 [ 300.004008] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88003fd0df00 [ 300.004008] R13: 0000000000000000 R14: 0000000000000001 R15: ffffffff816032e0 [ 300.004008] FS: 00007fcbdd609700(0000) GS:ffff88003fd00000(0000) knlGS:0000000000000000 [ 300.004008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.004008] CR2: ffffffff811c59d3 CR3: 0000000037879000 CR4: 00000000000406e0 [ 300.004008] Stack: [ 300.004008] ffff88003fd03ea8 ffffffff810f1775 ffff88003c8cb958 ffff88003fd0df00 [ 300.004008] 0000000000000000 0000000000000001 ffff88003fd03f18 ffffffff810f28c4 [ 300.004008] ffff88003fd0eb68 ffff88003fd0e968 ffff88003fd0e768 ffff88003fd0df68 [ 300.004008] Call Trace: [ 300.004008] <IRQ> [ 300.004008] [<ffffffff810f1775>] cascade+0x45/0x70 [ 300.004008] [<ffffffff810f28c4>] run_timer_softirq+0x2f4/0x340 [ 300.004008] [<ffffffff8107e380>] __do_softirq+0xd0/0x440 [ 300.004008] [<ffffffff8107e8a3>] irq_exit+0xb3/0xc0 [ 300.004008] [<ffffffff815c2032>] smp_apic_timer_interrupt+0x42/0x50 [ 300.004008] [<ffffffff815bfe37>] apic_timer_interrupt+0x87/0x90 [ 300.004008] <EOI> [ 300.004008] [<ffffffff811fb80c>] ? create_object+0x13c/0x2e0 [ 300.004008] [<ffffffff8109b23e>] ? __kernel_text_address+0x4e/0x70 [ 300.004008] [<ffffffff8109b23e>] ? __kernel_text_address+0x4e/0x70 [ 300.004008] [<ffffffff8101e17f>] print_context_stack+0x7f/0xf0 [ 300.004008] [<ffffffff8101d55b>] dump_trace+0x11b/0x300 [ 300.004008] [<ffffffff8102970b>] save_stack_trace+0x2b/0x50 [ 300.004008] [<ffffffff811fb80c>] create_object+0x13c/0x2e0 [ 300.004008] [<ffffffff815b2e8e>] kmemleak_alloc+0x4e/0xb0 [ 300.004008] [<ffffffff811e475d>] kmem_cache_alloc_trace+0x18d/0x2f0 [ 300.004008] [<ffffffff8128b139>] kernfs_fop_open+0xc9/0x380 [ 300.004008] [<ffffffff8120214f>] do_dentry_open+0x1ff/0x2f0 [ 300.004008] [<ffffffff8128b070>] ? kernfs_fop_release+0x70/0x70 [ 300.004008] [<ffffffff812034f9>] vfs_open+0x59/0x60 [ 300.004008] [<ffffffff812130de>] path_openat+0x1ce/0x1260 [ 300.004008] [<ffffffff812154ae>] do_filp_open+0x7e/0xe0 [ 300.004008] [<ffffffff812251ff>] ? __alloc_fd+0xaf/0x180 [ 300.004008] [<ffffffff8120387b>] do_sys_open+0x12b/0x210 [ 300.004008] [<ffffffff8120397e>] SyS_open+0x1e/0x20 [ 300.004008] [<ffffffff815bf0b6>] entry_SYSCALL_64_fastpath+0x16/0x7a [ 300.004008] Code: 66 90 48 8b 46 10 48 8b 4f 40 55 48 89 c2 48 89 e5 48 29 ca 48 81 fa ff 00 00 00 77 20 0f b6 c0 48 8d 44 c7 68 48 8b 10 48 85 d2 <48> 89 16 74 04 48 89 72 08 48 89 30 48 89 46 08 5d c3 48 81 fa [ 300.004008] RIP [<ffffffff810f168e>] __internal_add_timer+0x2e/0xd0 [ 300.004008] RSP <ffff88003fd03e78> [ 300.004008] CR2: ffffffff811c59d3 Fixes: c62987bbd8a1 ("bridge: push bridge setting ageing_time down to switchdev") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13switchdev: check if the vlan id is in the proper vlan rangeNikolay Aleksandrov
VLANs 0 and 4095 are reserved and shouldn't be used, add checks to switchdev similar to the bridge. Also make sure ids above 4095 cannot be passed either. Fixes: 47f8328bb1a4 ("switchdev: add new switchdev bridge setlink") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13switchdev: enforce no pvid flag in vlan rangesNikolay Aleksandrov
We shouldn't allow BRIDGE_VLAN_INFO_PVID flag in VLAN ranges. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Elad Raz <eladr@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13net: dsa: do not warn unsupported bridge opsVivien Didelot
A DSA driver may not provide the port_join_bridge and port_leave_bridge functions, so don't warn in such case. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13RDS-TCP: Reset tcp callbacks if re-using an outgoing socket in ↵Sowmini Varadhan
rds_tcp_accept_one() Consider the following "duelling syn" sequence between two peers A and B: A B SYN1 --> <-- SYN2 SYN2ACK --> Note that the SYN/ACK has already been sent out by TCP before rds_tcp_accept_one() gets invoked as part of callbacks. If the inet_addr(A) is numerically less than inet_addr(B), the arbitration scheme in rds_tcp_accept_one() will prefer the TCP connection triggered by SYN1, and will send a CLOSE for the SYN2 (just after the SYN2ACK was sent). Since B also follows the same arbitration scheme, it will send the SYN-ACK for SYN1 that will set up a healthy ESTABLISHED connection on both sides. B will also get a CLOSE for SYN2, which should result in the cleanup of the TCP state machine for SYN2, but it should not trigger any stale RDS-TCP callbacks (such as ->writespace, ->state_change etc), that would disrupt the progress of the SYN2 based RDS-TCP connection. Thus the arbitration scheme in rds_tcp_accept_one() should restore rds_tcp callbacks for the winner before setting them up for the new accept socket, and also make sure that conn->c_outgoing is set to 0 so that we do not trigger any reconnect attempts on the passive side of the tcp socket in the future, in conformance with commit c82ac7e69efe ("net/rds: RDS-TCP: only initiate reconnect attempt on outgoing TCP socket.") Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13RDS: Invoke ->laddr_check() in rds_bind() for explicitly bound transports.Sowmini Varadhan
The IP address passed to rds_bind() should be vetted by the transport's ->laddr_check() for a previously bound transport. This needs to be done to avoid cases where, for example, the application has asked for an IB transport, but the IP address passed to bind is only usable on ethernet interfaces. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13netfilter: nfqueue: don't use prev pointerFlorian Westphal
Usage of -prev seems buggy. While packet was out our hook cannot be removed but we have no way to know if the previous one is still valid. So better not use ->prev at all. Since NF_REPEAT just asks to invoke same hook function again, just do so, and continue with nf_interate if we get an ACCEPT verdict. A side effect of this change is that if nf_reinject(NF_REPEAT) causes another REPEAT we will now drop the skb instead of a kernel loop. However, NF_REPEAT loops would be a bug so this should not happen anyway. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-13mac80211: use new cfg80211_inform_bss_frame_data() APIJohannes Berg
The new API is more easily extensible with a metadata struct passed to it, use it in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13mac80211: Do not restart scheduled scan if multiple scan plans are setAvraham Stern
If multiple scan plans were set for scheduled scan, do not restart scheduled scan on reconfig because it is possible that some scan plans were already completed and there is no need to run them all over again. Instead, notify userspace that scheduled scan stopped so it can configure new scan plans for scheduled scan. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13cfg80211: Add multiple scan plans for scheduled scanAvraham Stern
Add the option to configure multiple 'scan plans' for scheduled scan. Each 'scan plan' defines the number of scan cycles and the interval between scans. The scan plans are executed in the order they were configured. The last scan plan will always run infinitely and thus defines only the interval between scans. The maximum number of scan plans supported by the device and the maximum number of iterations in a single scan plan are advertised to userspace so it can configure the scan plans appropriately. When scheduled scan results are received there is no way to know which scan plan is being currently executed, so there is no way to know when the next scan iteration will start. This is not a problem, however. The scan start timestamp is only used for flushing old scan results, and there is no difference between flushing all results received until the end of the previous iteration or the start of the current one, since no results will be received in between. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13nl80211: allow BSS data to include CLOCK_BOOTTIME timestampDmitry Shmidt
For location and connectivity services, userspace would often like to know the time when the BSS was last seen. The current "last seen" value is calculated in a way that makes it less useful, especially if the system suspended in the meantime. Add the ability for the driver to report a real CLOCK_BOOTTIME stamp that can then be reported to userspace (if present). Drivers wishing to use this must be converted to the new API to call cfg80211_inform_bss_data() or cfg80211_inform_bss_frame_data(). They need to ensure the reported value is accurate enough even when the frame might have been buffered in the device (e.g. firmware.) Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> [modified to use struct, inlines] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13mac80211: Fix hwflags debugfs file formatMohammed Shafi Shajakhan
Commit 30686bf7f5b3 ("mac80211: convert HW flags to unsigned long bitmap") accidentally removed the newline delimiter from the hwflags debugfs file. Fix this by adding back the newline between the HW flags. Cc: stable@vger.kernel.org [4.2] Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> [fix commit log] Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13Revert "mac80211: remove exposing 'mfp' to drivers"Tamizh chelvam
This reverts commit 5c48f1201744233d4f235c7dd916d5196ed20716. Some device drivers (ath10k) offload part of aggregation including AddBA/DelBA negotiations to firmware. In such scenario, the PMF configuration of the station needs to be provided to driver to enable encryption of AddBA/DelBA action frames. Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13Merge remote-tracking branch 'net-next/master' into mac80211-nextJohannes Berg
Merge net-next to get some driver changes that patches depend on (in order to avoid conflicts). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-12bridge: vlan: enforce no pvid flag in vlan rangesNikolay Aleksandrov
Currently it's possible for someone to send a vlan range to the kernel with the pvid flag set which will result in the pvid bouncing from a vlan to vlan and isn't correct, it also introduces problems for hardware where it doesn't make sense having more than 1 pvid. iproute2 already enforces this, so let's enforce it on kernel-side as well. Reported-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12ipv6 route: use err pointers instead of returning pointer by referenceRoopa Prabhu
This patch makes ip6_route_info_create return err pointer instead of returning the rt pointer by reference as suggested by Dave Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12ipv6: Pass struct net into nf_ct_frag6_gatherEric W. Biederman
The function nf_ct_frag6_gather is called on both the input and the output paths of the networking stack. In particular ipv6_defrag which calls nf_ct_frag6_gather is called from both the the PRE_ROUTING chain on input and the LOCAL_OUT chain on output. The addition of a net parameter makes it explicit which network namespace the packets are being reassembled in, and removes the need for nf_ct_frag6_gather to guess. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12ipv4: Pass struct net into ip_defrag and ip_check_defragEric W. Biederman
The function ip_defrag is called on both the input and the output paths of the networking stack. In particular conntrack when it is tracking outbound packets from the local machine calls ip_defrag. So add a struct net parameter and stop making ip_defrag guess which network namespace it needs to defragment packets in. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12ipv4: Only compute net once in ip_call_ra_chainEric W. Biederman
ip_call_ra_chain is called early in the forwarding chain from ip_forward and ip_mr_input, which makes skb->dev the correct expression to get the input network device and dev_net(skb->dev) a correct expression for the network namespace the packet is being processed in. Compute the network namespace and store it in a variable to make the code clearer. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12packet: fix match_fanout_group()Eric Dumazet
Recent TCP listener patches exposed a prior af_packet bug : match_fanout_group() blindly assumes it is always safe to cast sk to a packet socket to compare fanout with af_packet_priv But SYNACK packets can be sent while attached to request_sock, which are smaller than a "struct sock". We can read non existent memory and crash. Fixes: c0de08d04215 ("af_packet: don't emit packet on orig fanout group") Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Eric Leblond <eric@regit.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12ipv4/icmp: redirect messages can use the ingress daddr as sourcePaolo Abeni
This patch allows configuring how the source address of ICMP redirect messages is selected; by default the old behaviour is retained, while setting icmp_redirects_use_orig_daddr force the usage of the destination address of the packet that caused the redirect. The new behaviour fits closely the RFC 5798 section 8.1.1, and fix the following scenario: Two machines are set up with VRRP to act as routers out of a subnet, they have IPs x.x.x.1/24 and x.x.x.2/24, with VRRP holding on to x.x.x.254/24. If a host in said subnet needs to get an ICMP redirect from the VRRP router, i.e. to reach a destination behind a different gateway, the source IP in the ICMP redirect is chosen as the primary IP on the interface that the packet arrived at, i.e. x.x.x.1 or x.x.x.2. The host will then ignore said redirect, due to RFC 1122 section 3.2.2.2, and will continue to use the wrong next-op. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12bridge: try switchdev op first in __vlan_vid_add/delJiri Pirko
Some drivers need to implement both switchdev vlan ops and vid_add/kill ndos. For that to work in bridge code, we need to try switchdev op first when adding/deleting vlan id. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12net: shrink struct sock and request_sock by 8 bytesEric Dumazet
One 32bit hole is following skc_refcnt, use it. skc_incoming_cpu can also be an union for request_sock rcv_wnd. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12net: SO_INCOMING_CPU setsockopt() supportEric Dumazet
SO_INCOMING_CPU as added in commit 2c8c56e15df3 was a getsockopt() command to fetch incoming cpu handling a particular TCP flow after accept() This commits adds setsockopt() support and extends SO_REUSEPORT selection logic : If a TCP listener or UDP socket has this option set, a packet is delivered to this socket only if CPU handling the packet matches the specified one. This allows to build very efficient TCP servers, using one listener per RX queue, as the associated TCP listener should only accept flows handled in softirq by the same cpu. This provides optimal NUMA behavior and keep cpu caches hot. Note that __inet_lookup_listener() still has to iterate over the list of all listeners. Following patch puts sk_refcnt in a different cache line to let this iteration hit only shared and read mostly cache lines. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12packet: support per-packet fwmark for af_packet sendmsgEdward Jee
Signed-off-by: Edward Hyunkoo Jee <edjee@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12sock: support per-packet fwmarkEdward Jee
It's useful to allow users to set fwmark for an individual packet, without changing the socket state. The function this patch adds in sock layer can be used by the protocols that need such a feature. Signed-off-by: Edward Hyunkoo Jee <edjee@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12bpf: enable non-root eBPF programsAlexei Starovoitov
In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12netfilter: nfnetlink_log: autoload nf_conntrack_netlink module ↵Ken-ichirou MATSUZAWA
NFQA_CFG_F_CONNTRACK config flag This patch enables to load nf_conntrack_netlink module if NFULNL_CFG_F_CONNTRACK config flag is specified. Signed-off-by: Ken-ichirou MATSUZAWA <chamas@h4.dion.ne.jp> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-12svcrdma: Fix NFS server crash triggered by 1MB NFS WRITEChuck Lever
Now that the NFS server advertises a maximum payload size of 1MB for RPC/RDMA again, it crashes in svc_process_common() when NFS client sends a 1MB NFS WRITE on an NFS/RDMA mount. The server has set up a 259 element array of struct page pointers in rq_pages[] for each incoming request. The last element of the array is NULL. When an incoming request has been completely received, rdma_read_complete() attempts to set the starting page of the incoming page vector: rqstp->rq_arg.pages = &rqstp->rq_pages[head->hdr_count]; and the page to use for the reply: rqstp->rq_respages = &rqstp->rq_arg.pages[page_no]; But the value of page_no has already accounted for head->hdr_count. Thus rq_respages now points past the end of the incoming pages. For NFS WRITE operations smaller than the maximum, this is harmless. But when the NFS WRITE operation is as large as the server's max payload size, rq_respages now points at the last entry in rq_pages, which is NULL. Fixes: cc9a903d915c ('svcrdma: Change maximum server payload . . .') BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=270 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Sagi Grimberg <sagig@dev.mellanox.co.il> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Shirley Ma <shirley.ma@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-10-12netfilter: bridge: avoid unused label warningArnd Bergmann
With the ARM mini2440_defconfig, the bridge netfilter code gets built with both CONFIG_NF_DEFRAG_IPV4 and CONFIG_NF_DEFRAG_IPV6 disabled, which leads to a harmless gcc warning: net/bridge/br_netfilter_hooks.c: In function 'br_nf_dev_queue_xmit': net/bridge/br_netfilter_hooks.c:792:2: warning: label 'drop' defined but not used [-Wunused-label] This gets rid of the warning by cleaning up the code to avoid the respective #ifdefs causing this problem, and replacing them with if(IS_ENABLED()) checks. I have verified that the resulting object code is unchanged, and an additional advantage is that we now get compile coverage of the unused functions in more configurations. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: dd302b59bde0 ("netfilter: bridge: don't leak skb in error paths") Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-12Merge tag 'ipvs4-for-v4.4' of ↵Pablo Neira Ayuso
https://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs-next Simon Horman says: ==================== Fourth Round of IPVS Updates for v4.4 please consider these build warning cleanups from David Ahern and myself. They resolve some minor side effects of Eric Biederman' heroic work to cleanup IPVS which you recently pulled: its queued up for v4.4 so no need to worry about earlier kernel versions. ==================== Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-12netfilter: ipt_rpfilter: remove the nh_scope test in rpfilter_lookup_reverselucien
--accept-local option works for res.type == RTN_LOCAL, which should be from the local table, but there, the fib_info's nh->nh_scope = RT_SCOPE_NOWHERE ( > RT_SCOPE_HOST). in fib_create_info(). if (cfg->fc_scope == RT_SCOPE_HOST) { struct fib_nh *nh = fi->fib_nh; /* Local address is added. */ if (nhs != 1 || nh->nh_gw) goto err_inval; nh->nh_scope = RT_SCOPE_NOWHERE; <=== nh->nh_dev = dev_get_by_index(net, fi->fib_nh->nh_oif); err = -ENODEV; if (!nh->nh_dev) goto failure; but in our rpfilter_lookup_reverse(): if (dev_match || flags & XT_RPFILTER_LOOSE) return FIB_RES_NH(res).nh_scope <= RT_SCOPE_HOST; if nh->nh_scope > RT_SCOPE_HOST, it will fail. --accept-local option will never be passed. it seems the test is bogus and can be removed to fix this issue. if (dev_match || flags & XT_RPFILTER_LOOSE) return FIB_RES_NH(res).nh_scope <= RT_SCOPE_HOST; ipv6 does not have this issue. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-12nfnetlink_cttimeout: add rcu_barrier() on module removalPablo Neira Ayuso
Make sure kfree_rcu() released objects before leaving the module removal exit path. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-12netfilter: conntrack: fix crash on timeout object removalPablo Neira Ayuso
The object and module refcounts are updated for each conntrack template, however, if we delete the iptables rules and we flush the timeout database, we may end up with invalid references to timeout object that are just gone. Resolve this problem by setting the timeout reference to NULL when the custom timeout entry is removed from our base. This patch requires some RCU trickery to ensure safe pointer handling. This handling is similar to what we already do with conntrack helpers, the idea is to avoid bumping the timeout object reference counter from the packet path to avoid the cost of atomic ops. Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-12netfilter: xt_CT: don't put back reference to timeout policy objectPablo Neira Ayuso
On success, this shouldn't put back the timeout policy object, otherwise we may have module refcount overflow and we allow deletion of timeout that are still in use. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-10-12bridge: push bridge setting ageing_time down to switchdevScott Feldman
Use SWITCHDEV_F_SKIP_EOPNOTSUPP to skip over ports in bridge that don't support setting ageing_time (or setting bridge attrs in general). If push fails, don't update ageing_time in bridge and return err to user. If push succeeds, update ageing_time in bridge and run gc_timer now to recalabrate when to run gc_timer next, based on new ageing_time. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12switchdev: skip over ports returning -EOPNOTSUPP when recursing portsScott Feldman
This allows us to recurse over all the ports, skipping over unsupporting ports. Without the change, the recursion would stop at first unsupported port. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12tcp: change type of alive from int to boolRichard Sailer
The alive parameter of tcp_orphan_retries, indicates whether the connection is assumed alive or not. In the function and all places calling it is used as a boolean value. Therefore this changes the type of alive to bool in the function definition and all calling locations. Since tcp_orphan_tries is a tcp_timer.c local function no change in any other file or header is necessary. Signed-off-by: Richard Sailer <richard@weltraumpflege.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-29 02:58:48 +0000