summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2012-02-23Bluetooth: Fix EIR data clearing when powering offJohan Hedberg
When powering off we should assume that the EIR data isn't valid anymore. This patch makes sure it gets cleared in hci_dev_do_close and thereby ensures that a correct new EIR is recreated when powering on again. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Implement Set LE commandJohan Hedberg
This patch implements support for the Set LE mgmt command. Now, in addition to the enable_le module parameter user space needs to send an explicit Enable LE command to enable LE support. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Fix Set SSP supported checkJohan Hedberg
The test for SSP support needs to be earlier in the set_ssp function so that we return an error when SSP is not supported even when the device is powered off. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: Enable timestamps for control channelMarcel Holtmann
The control channel can be also monitored, so include timestamps here as well. And make sure management events get their timestamp when they are created. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-23Bluetooth: Explicitly clear EIR data upon hci_dev setupJohan Hedberg
Some controllers preserve their EIR data even after a reset so we need to explicitly clear this during the device setup procedure. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Fix clearing of hdev->eirJohan Hedberg
The hdev->eir buffer needs to be cleared when clearing the EIR data. Otherwise subsequent attempts at setting the EIR to something valid again may fail because the code thinks that the EIR hasn't changed. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Fix EIR toggling with SSPJohan Hedberg
This patch fixes setting the EIR properly when the SSP flag has been set when powered off (in such a case there is no pending Set_SSP command). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: Fix coding style issues in mgmt codeAndrei Emeltchenko
In this case we need to use braces in both branches. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-23Bluetooth: Fix two minor style issues in HCI codeMarcel Holtmann
WARNING: min() should probably be min_t(__u16, scb->expect, count) + len = min(scb->expect, (__u16)count); WARNING: Statements terminations use 1 semicolon + INIT_LIST_HEAD(&conn->chan_list);; Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-23Bluetooth: Fix two minor style issues in management codeMarcel Holtmann
WARNING: Statements terminations use 1 semicolon + return err;; WARNING: space prohibited between function name and open parenthesis '(' + err = cmd_status (sk, index, MGMT_OP_CONFIRM_NAME, Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-23Bluetooth: mgmt: Make Set SSP command callable while powered offJohan Hedberg
This patch makes it possible to enable SSP through mgmt even when powered off. The setting will then get automatically actiated when powering on. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: Remove unneeded hci_cc_read_ssp_mode functionJohan Hedberg
The kernel has no need to track the hci_read_ssp_mode command since it has the hci_sent_cmd_data function to check what value was set when hci_write_ssp_mode completes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Make Set Link Security callable while powered offJohan Hedberg
This patch makes it possible to change the Link Security setting while powered off and have it automatically enabled when powering on a device. To track the desired state once powered on a new HCI_LINK_SECURITY flag is added. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: Add socket error functionAndrei Emeltchenko
Use locked and unlocked versions to help removing socket locks from l2cap core functions. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Reviewed-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-23Bluetooth: Add locked and unlocked state_changeAndrei Emeltchenko
Split to locked and unlocked versions of l2cap_state_change helping to remove socket locks from l2cap code. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-23Bluetooth: Add l2cap_chan_lockAndrei Emeltchenko
Channel lock will be used to lock L2CAP channels which are locked currently by socket locks. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-23Bluetooth: Revert to mutexes from RCU listAndrei Emeltchenko
Usage of RCU list looks not reasonalbe for a number of reasons: our code sleep and we had to use socket spinlocks. Most parts of code are updaters thus there is little sense to use RCU. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Reviewed-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-23Bluetooth: trivial: Fix long lineAndrei Emeltchenko
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-23Merge branch 'nf' of git://1984.lsi.us.es/netDavid S. Miller
2012-02-22netfilter: ip6_route_output() never returns NULL.RongQing.Li
ip6_route_output() never returns NULL, so it is wrong to check if the return value is NULL. Signed-off-by: RongQing.Li <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-22ipv6: ip6_route_output() never returns NULL.RongQing.Li
ip6_route_output() never returns NULL, so it is wrong to check if the return value is NULL. Signed-off-by: RongQing.Li <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-22cfg80211: restructure AP/GO mode APIJohannes Berg
The AP/GO mode API isn't very clearly defined, it has "set beacon" and "new beacon" etc. Modify the API to the following: * start AP -- all settings * change beacon -- new beacon data * stop AP -- stop AP mode operation This also reflects in the nl80211 API, rename the commands there correspondingly (but keep the old names for compatibility.) Overall, this makes it much clearer what's going on in the API. Kalle developed the ath6kl changes, I created the rest of the patch. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22af_unix: MSG_TRUNC support for dgram socketsEric Dumazet
Piergiorgio Beruto expressed the need to fetch size of first datagram in queue for AF_UNIX sockets and suggested a patch against SIOCINQ ioctl. I suggested instead to implement MSG_TRUNC support as a recv() input flag, as already done for RAW, UDP & NETLINK sockets. len = recv(fd, &byte, 1, MSG_PEEK | MSG_TRUNC); MSG_TRUNC asks recv() to return the real length of the packet, even when is was longer than the passed buffer. There is risk that a userland application used MSG_TRUNC by accident (since it had no effect on af_unix sockets) and this might break after this patch. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> CC: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-22net/ieee802154/6lowpan.c: reuse eth_mac_addr()Danny Kukawka
Use eth_mac_addr() for .ndo_set_mac_address, remove lowpan_set_address since it do currently the same as eth_mac_addr(). Additional advantage: eth_mac_addr() already checks if the given address is valid Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-22atm: clip: remove clip_tblEric Dumazet
Commit 32092ecf0644 (atm: clip: Use device neigh support on top of "arp_tbl".) introduced a bug since clip_tbl is zeroed : Crash occurs in __neigh_for_each_release() idle_timer_check() must use instead arp_tbl and neigh_check_cb() should ignore non clip neighbours. Idea from David Miller. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-21ipv4: ping: Fix recvmsg MSG_OOB error handling.David S. Miller
Don't return an uninitialized variable as the error, return -EOPNOTSUPP instead. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-21Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
2012-02-21rtnetlink: Fix problem with buffer allocationGreg Rose
Implement a new netlink attribute type IFLA_EXT_MASK. The mask is a 32 bit value that can be used to indicate to the kernel that certain extended ifinfo values are requested by the user application. At this time the only mask value defined is RTEXT_FILTER_VF to indicate that the user wants the ifinfo dump to send information about the VFs belonging to the interface. This patch fixes a bug in which certain applications do not have large enough buffers to accommodate the extra information returned by the kernel with large numbers of SR-IOV virtual functions. Those applications will not send the new netlink attribute with the interface info dump request netlink messages so they will not get unexpectedly large request buffers returned by the kernel. Modifies the rtnl_calcit function to traverse the list of net devices and compute the minimum buffer size that can hold the info dumps of all matching devices based upon the filter passed in via the new netlink attribute filter mask. If no filter mask is sent then the buffer allocation defaults to NLMSG_GOODSIZE. With this change it is possible to add yet to be defined netlink attributes to the dump request which should make it fairly extensible in the future. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-21neighbour: Fixed race condition at tbl->nhtMichel Machado
When the fixed race condition happens: 1. While function neigh_periodic_work scans the neighbor hash table pointed by field tbl->nht, it unlocks and locks tbl->lock between buckets in order to call cond_resched. 2. Assume that function neigh_periodic_work calls cond_resched, that is, the lock tbl->lock is available, and function neigh_hash_grow runs. 3. Once function neigh_hash_grow finishes, and RCU calls neigh_hash_free_rcu, the original struct neigh_hash_table that function neigh_periodic_work was using doesn't exist anymore. 4. Once back at neigh_periodic_work, whenever the old struct neigh_hash_table is accessed, things can go badly. Signed-off-by: Michel Machado <michel@digirati.com.br> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-21Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-02-21unix: Support peeking offset for stream socketsPavel Emelyanov
The same here -- we can protect the sk_peek_off manipulations with the unix_sk->readlock mutex. The peeking of data from a stream socket is done in the datagram style, i.e. even if there's enough room for more data in the user buffer, only the head skb's data is copied in there. This feature is preserved when peeking data from a given offset -- the data is read till the nearest skb's boundary. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-21unix: Support peeking offset for datagram and seqpacket socketsPavel Emelyanov
The sk_peek_off manipulations are protected with the unix_sk->readlock mutex. This mutex is enough since all we need is to syncronize setting the offset vs reading the queue head. The latter is fully covered with the mentioned lock. The recently added __skb_recv_datagram's offset is used to pick the skb to read the data from. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-21sock: Introduce the SO_PEEK_OFF sock optionPavel Emelyanov
This one specifies where to start MSG_PEEK-ing queue data from. When set to negative value means that MSG_PEEK works as ususally -- peeks from the head of the queue always. When some bytes are peeked from queue and the peeking offset is non negative it is moved forward so that the next peek will return next portion of data. When non-peeking recvmsg occurs and the peeking offset is non negative is is moved backward so that the next peek will still peek the proper data (i.e. the one that would have been picked if there were no non peeking recv in between). The offset is set using per-proto opteration to let the protocol handle the locking issues and to check whether the peeking offset feature is supported by the protocol the socket belongs to. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-21datagram: Add offset argument to __skb_recv_datagramPavel Emelyanov
This one is only considered for MSG_PEEK flag and the value pointed by it specifies where to start peeking bytes from. If the offset happens to point into the middle of the returned skb, the offset within this skb is put back to this very argument. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-21datagram: Factor out sk queue referencingPavel Emelyanov
This makes lines shorter and simplifies further patching. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-21mac80211: Fix a warning on changing to monitor mode from STAMohammed Shafi Shajakhan
nothing needs to be done for monitor/AP_VLAN mode on calling ieee80211_bss_info_change_notify -> drv_bss_info_changed with the change flag 'BSS_CHANGED_IDLE'. 'wl1271' seems to use BSS_CHANGED_IDLE only for STA and IBSS mode. further the non-idle state of the monitor mode is taken care by the 'count' variable which counts non-idle interfaces. ieee80211_idle_off(local, "in use") will be called. this fixes the following WARNING when we have initially STA mode (network manager running) and not associated, and change it to monitor mode with network manager disabled and bringing up the monitor mode. this changes the idle state from 'true' (STA unassociated) to 'false' (MONITOR mode) exposed by the commit 405385f8ce7a2ed8f82e216d88b5282142e1288b "mac80211: set bss_conf.idle when vif is connected" WARNING: net/mac80211/main.c:212 ieee80211_bss_info_change_notify+0x1cf/0x330 [mac80211]() Hardware name: 64756D6 Pid: 3835, comm: ifconfig Tainted: G O 3.3.0-rc3-wl #9 Call Trace: [<c0133b02>] warn_slowpath_common+0x72/0xa0 [<fc8e8c3f>] ? ieee80211_bss_info_change_notify+0x1cf/0x330 [mac80211] [<fc8e8c3f>] ? ieee80211_bss_info_change_notify+0x1cf/0x330 [mac80211] [<c0133b52>] warn_slowpath_null+0x22/0x30 [<fc8e8c3f>] ieee80211_bss_info_change_notify+0x1cf/0x330 [mac80211] [<fc8f9de3>] __ieee80211_recalc_idle+0x113/0x430 [mac80211] [<fc8fabc6>] ieee80211_do_open+0x156/0x7e0 [mac80211] [<fc8f8a25>] ? ieee80211_check_concurrent_iface+0x25/0x180 [mac80211] [<c015dd9f>] ? raw_notifier_call_chain+0x1f/0x30 [<fc8fb290>] ieee80211_open+0x40/0x80 [mac80211] [<c05894f6>] __dev_open+0x96/0xe0 [<c068fba5>] ? _raw_spin_unlock_bh+0x35/0x40 [<c05881d9>] __dev_change_flags+0x109/0x170 [<c0589423>] dev_change_flags+0x23/0x60 [<c05f3770>] devinet_ioctl+0x6a0/0x770 ieee80211 phy0: device no longer idle - in use Cc: Eliad Peller <eliad@wizery.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-21mac80211: zero initialize count field in ieee80211_tx_rateMohammed Shafi Shajakhan
rate control algorithms concludes the rate as invalid with rate[i].idx < -1 , while they do also check for rate[i].count is non-zero. it would be safer to zero initialize the 'count' field. recently we had a ath9k rate control crash where the ath9k rate control in ath_tx_status assumed to check only for rate[i].count being non-zero in one instance and ended up in using invalid rate index for 'connection monitoring NULL func frames' which eventually lead to the crash. thanks to Pavel Roskin for fixing it and finding the root cause. https://bugzilla.redhat.com/show_bug.cgi?id=768639 Cc: stable@vger.kernel.org Cc: Pavel Roskin <proski@gnu.org> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-21Bluetooth: mgmt: Fix connectable/discoverable response valuesJohan Hedberg
The connectable/discoverable flags need to be changed before sending the response since otherwise the settings value will be incorrect. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-21Bluetooth: Fix clearing of persistent dev_flagsJohan Hedberg
Now that most flags are persistent, only the LE_SCAN flag should be cleared after a reset. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-21Bluetooth: mgmt: Fix New Settings event for connectable/discoverableJohan Hedberg
When powered off and doing changes to the Connectable or Discoverable setting we should also send an appropriate New Settings event in addition to the command response. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-21Bluetooth: mgmt: Add convenience function for sending New SettingsJohan Hedberg
The New Settings event needs to be sent from quite many places so it makes sense to have a convenience function for it to simplify the code. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-21Bluetooth: mgmt: Fix current settings values when powered offJohan Hedberg
We should not stop iterating through the various settings if powered off since most may still be set even then. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-21Bluetooth: mgmt: Fix Removing discoverable timeout in set_connectableJohan Hedberg
When switching connectable mode off any pending discoverable timeout must also be disabled to avoid duplicate write_scan_enable commands. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-21Bluetooth: mgmt: Allow connectable/discoverable changes in off stateJohan Hedberg
This patch makes it possible to toggle the connectable & discoverable settings when powered off. Two new hdev->dev_flags flags are added to track what the scan mode should be when the device is finally powered on. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-21mac80211: Convert call_rcu() to kfree_rcu(), drop mesh_gate_node_reclaim()Paul E. McKenney
The call_rcu() in mesh_gate_del() invokes mesh_gate_node_reclaim(), which simply calls kfree(). So convert the call_rcu() to kfree_rcu(), allowing mesh_gate_node_reclaim() to be eliminated. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org
2012-02-21ipv4: Convert call_rcu() to kfree_rcu(), drop opt_kfree_rcuPaul E. McKenney
The call_rcu() in do_ip_setsockopt() invokes opt_kfree_rcu(), which just calls kfree(). So convert the call_rcu() to kfree_rcu(), which allows opt_kfree_rcu() to be eliminated. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org
2012-02-21ipv4: Convert call_rcu() to kfree_rcu(), drop opt_kfree_rcu()Paul E. McKenney
Because opt_kfree_rcu() just calls kfree(), all call_rcu() uses of it may be converted to kfree_rcu(). This permits opt_kfree_rcu() to be eliminated. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org
2012-02-21Bluetooth: mgmt: Fix pairable setting upon initializationJohan Hedberg
When mgmt is not in use the HCI_PAIRABLE flag will get implicitly set so that pairing still works with old user space versions. However, as soon as mgmt comes into play we should clear this flag so that it can be properly set through the set_pairable command by user space. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-21Bluetooth: mgmt: Fix set_fast_connectable error returnJohan Hedberg
This patch ensures that Set Fast Connectable fails apropriately if we are not already in a connectable state (which is a pre-requisite for fast connectable). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-21Bluetooth: mgmt: Fix set_local_name and set_dev_class powered checksJohan Hedberg
Both the Set Local Name and the Set Device Class commands should fail if the adapter is not powered on. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-30 01:17:29 +0000