summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2011-12-06sock_diag: Initial skeletonPavel Emelyanov
When receiving the SOCK_DIAG_BY_FAMILY message we have to find the handler for provided family and pass the nl message to it. This patch describes an infrastructure to work with such nandlers and implements stubs for AF_INET(6) ones. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06inet_diag: Switch from _GETSOCK to IPPROTO_ numbersPavel Emelyanov
Sorry, but the vger didn't let this message go to the list. Re-sending it with less spam-filter-prone subject. When dumping the AF_INET/AF_INET6 sockets user will also specify the protocol, so prepare the protocol diag handlers to work with IPPROTO_ constants. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06inet_diag: Move byte-code finding up the call-stackPavel Emelyanov
Current code calculates it at fixed offset. This offset will change, so move the BC calculation upper to make the further patching simpler. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06sock_diag: Introduce new message typePavel Emelyanov
This type will run the family+protocol based socket dumping. Also prepare the stub function for it. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06inet_diag: Partly rename inet_ to sock_Pavel Emelyanov
The ultimate goal is to get the sock_diag module, that works in family+protocol terms. Currently this is suitable to do on the inet_diag basis, so rename parts of the code. It will be moved to sock_diag.c later. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-07batman-adv: format multi-line if in the correct wayAntonio Quartulli
in an multi-line if statement leading edges should line up to the opening parenthesis Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-12-07batman-adv: remove extra negation in gw_out_of_range()Dan Carpenter
There is a typo here where an extra '!' made the check to the opposite of what was intended. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-12-06Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
2011-12-06ipv4:correct description for tcp_max_syn_backlogPeter Pan(潘卫平)
Since commit c5ed63d66f24(tcp: fix three tcp sysctls tuning), sysctl_max_syn_backlog is determined by tcp_hashinfo->ehash_mask, and the minimal value is 128, and it will increase in proportion to the memory of machine. The original description for tcp_max_syn_backlog and sysctl_max_syn_backlog are out of date. Changelog: V2: update description for sysctl_max_syn_backlog Signed-off-by: Weiping Pan <panweiping3@gmail.com> Reviewed-by: Shan Wei <shanwei88@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06openvswitch: small potential memory leak in ovs_vport_alloc()Dan Carpenter
We're unlikely to hit this leak, but the static checkers complain if we don't take care of it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2011-12-06ipv4: arp: Cleanup in arp.cIgor Maravic
Use "IS_ENABLED(CONFIG_FOO)" macro instead of "defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE)" Signed-off-by: Igor Maravic <igorm@etf.rs> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-05tcp: remove TCP_OFF and TCP_PAGE macrosEric Dumazet
As mentioned by Joe Perches, TCP_OFF() and TCP_PAGE() macros are useless. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-05bql: fix CONFIG_XPS=n buildEric Dumazet
netdev_queue_release() should be called even if CONFIG_XPS=n to properly release device reference. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-05tcp: fix tcp_trim_head()Eric Dumazet
commit f07d960df3 (tcp: avoid frag allocation for small frames) breaked assumption in tcp stack that skb is either linear (skb->data_len == 0), or fully fragged (skb->data_len == skb->len) tcp_trim_head() made this assumption, we must fix it. Thanks to Vijay for providing a very detailed explanation. Reported-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-05caif: Stash away hijacked skb destructor and call it latersjur.brandeland@stericsson.com
This patch adds functionality for avoiding orphaning SKB too early. The original skb is stashed away and the original destructor is called from the hi-jacked flow-on callback. If CAIF interface goes down and a hi-jacked SKB exists, the original skb->destructor is restored. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-05caif: Add support for flow-control on device's tx-queuesjur.brandeland@stericsson.com
Flow control is implemented by inspecting the qdisc queue length in order to detect potential overflow on the TX queue. When a threshold is reached flow-off is sent upwards in the CAIF stack. At the same time the skb->destructor is hi-jacked by orphaning the SKB and the original destructor is replaced with a "flow-on" callback. When the "hi-jacked" SKB is consumed the queue should be empty, and the "flow-on" callback is called and xon is sent upwards in the CAIF stack. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-05caif: Add support for CAIF over CDC NCM USB interfacesjur.brandeland@stericsson.com
NCM 1.0 does not support anything but Ethernet framing, hence CAIF payload will be put into Ethernet frames. Discovery is based on fixed USB vendor 0x04cc (ST-Ericsson), product-id 0x230f (NCM). In this variant only CAIF payload is sent over the NCM interface. The CAIF stack (cfusbl.c) will when USB interface register first check if we got a CDC NCM USB interface with the right VID, PID. It will then read the device's Ethernet address and create a 'template' Ethernet TX header, using a broadcast address as the destination address, and EthType 0x88b5 (802.1 Local Experimental - vendor specific). A protocol handler for 0x88b5 is setup for reception of CAIF frames from the CDC NCM USB interface. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-05net: Rename dst_get_neighbour{, _raw} to dst_get_neighbour_noref{, _raw}.David Miller
To reflect the fact that a refrence is not obtained to the resulting neighbour entry. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Roland Dreier <roland@purestorage.com>
2011-12-05Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2011-12-05ipv4: Fix peer validation on cached lookup.David S. Miller
If ipv4_valdiate_peer() fails during a cached entry lookup, we'll NULL derer since the loop iterator assumes rth is not NULL. Letting this be handled as a failure is just bogus, so just make it not fail. If we have trouble getting a non-NULL neighbour for the redirected gateway, just restore the original gateway and continue. The very next use of this cached route will try again. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-05Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-12-04tcp: tcp_sendmsg() page recyclingEric Dumazet
If our TCP_PAGE(sk) is not shared (page_count() == 1), we can set page offset to 0. This permits better filling of the pages on small to medium tcp writes. "tbench 16" results on my dev server (2x4x2 machine) : Before : 3072 MB/s After : 3146 MB/s (2.4 % gain) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-04tcp: take care of misalignmentsEric Dumazet
We discovered that TCP stack could retransmit misaligned skbs if a malicious peer acknowledged sub MSS frame. This currently can happen only if output interface is non SG enabled : If SG is enabled, tcp builds headless skbs (all payload is included in fragments), so the tcp trimming process only removes parts of skb fragments, header stay aligned. Some arches cant handle misalignments, so force a head reallocation and shrink headroom to MAX_TCP_HEADER. Dont care about misaligments on x86 and PPC (or other arches setting NET_IP_ALIGN to 0) This patch introduces __pskb_copy() which can specify the headroom of new head, and pskb_copy() becomes a wrapper on top of __pskb_copy() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-04tcp: drop SYN+FIN messagesEric Dumazet
Denys Fedoryshchenko reported that SYN+FIN attacks were bringing his linux machines to their limits. Dont call conn_request() if the TCP flags includes SYN flag Reported-by: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-03Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch
2011-12-03ipv6: Kill ndisc_get_neigh() inline helper.David S. Miller
It's only used in net/ipv6/route.c and the NULL device check is superfluous for all of the existing call sites. Just expand the __ndisc_lookup_errno() call at each location. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-03ipv6: Various cleanups in route.cDavid S. Miller
1) x == NULL --> !x 2) x != NULL --> x 3) (x&BIT) --> (x & BIT) 4) (BIT1|BIT2) --> (BIT1 | BIT2) 5) proper argument and struct member alignment Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-03ipv6: Various cleanups in ip6_route.cDavid S. Miller
1) x == NULL --> !x 2) x != NULL --> x 3) if() --> if () 4) while() --> while () 5) (x & BIT) == 0 --> !(x & BIT) 6) (x&BIT) --> (x & BIT) 7) x=y --> x = y 8) (BIT1|BIT2) --> (BIT1 | BIT2) 9) if ((x & BIT)) --> if (x & BIT) 10) proper argument and struct member alignment Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-03net: Add Open vSwitch kernel components.Jesse Gross
Open vSwitch is a multilayer Ethernet switch targeted at virtualized environments. In addition to supporting a variety of features expected in a traditional hardware switch, it enables fine-grained programmatic extension and flow-based control of the network. This control is useful in a wide variety of applications but is particularly important in multi-server virtualization deployments, which are often characterized by highly dynamic endpoints and the need to maintain logical abstractions for multiple tenants. The Open vSwitch datapath provides an in-kernel fast path for packet forwarding. It is complemented by a userspace daemon, ovs-vswitchd, which is able to accept configuration from a variety of sources and translate it into packet processing rules. See http://openvswitch.org for more information and userspace utilities. Signed-off-by: Jesse Gross <jesse@nicira.com>
2011-12-03ipv6: Add fragment reporting to ipv6_skip_exthdr().Jesse Gross
While parsing through IPv6 extension headers, fragment headers are skipped making them invisible to the caller. This reports the fragment offset of the last header in order to make it possible to determine whether the packet is fragmented and, if so whether it is a first or last fragment. Signed-off-by: Jesse Gross <jesse@nicira.com>
2011-12-03vlan: Move vlan_set_encap_proto() to vlan header filePravin B Shelar
Open vSwitch needs this function for vlan handling. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2011-12-03genetlink: Add lockdep_genl_is_held().Pravin B Shelar
Open vSwitch uses genl_mutex locking to protect datapath data-structures like flow-table, flow-actions. Following patch adds lockdep_genl_is_held() which is used for rcu annotation to prove locking. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2011-12-03genetlink: Add genl_notify()Pravin B Shelar
Open vSwitch uses Generic Netlink interface for communication between userspace and kernel module. genl_notify() is used for sending notification back to userspace. genl_notify() is analogous to rtnl_notify() but uses genl_sock instead of rtnl. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2011-12-03ipv4: make sure RTO_ONLINK is saved in routing cacheJulian Anastasov
__mkroute_output fails to work with the original tos and uses value with stripped RTO_ONLINK bit. Make sure we put the original TOS bits into rt_key_tos because it used to match cached route. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-03Bluetooth: trivial: correct check for LMP versionAndrei Emeltchenko
Make sure that code match exactly what comment says about pre 1.2 bluetooth version. Since this is HCI detail lmp_ver changed to hci_ver. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-03Bluetooth: Remove magic bluetooth version numbersAndrei Emeltchenko
Use bluetooth names instead of BT SIG assigned numbers Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-03Merge branch 'master' of ↵Gustavo F. Padovan
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth
2011-12-03Bluetooth: Correct version check in hci_setupAndrei Emeltchenko
Check for hci_ver instead of lmp_ver Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-02Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/libertas/cfg.c
2011-12-02atm: clip: Remove code commented out since eternity.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-12-02Bluetooth: remove old codeAndrei Emeltchenko
Remove old code not touched for several years. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-02Bluetooth: LE Set Scan Parameter CommandAndre Guedes
This patch adds the parameter struct and the command complete event handler to the LE Set Scan Parameter HCI command. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-02Bluetooth: Add dev_flags to struct hci_devAndre Guedes
This patch adds the dev_flags field to struct hci_dev. This new flags variable should be used to define flags related to BR/EDR and/or LE controller itself. It should be used to define flags which represents states from the controller. The dev_flags is cleared in case the controller sends a Reset Command Complete Event to the host. Also, this patch adds the HCI_LE_SCAN flag which was created to track if the controller is performing LE scan or not. The flag is set/cleared when the controller starts/stops scanning. This is an initial effort to stop using hdev->flags to define internal flags since it is exported to userspace by an ioctl. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-02Bluetooth: Add HCI Read Flow Control Mode functionAndrei Emeltchenko
Upstream Code Aurora function with minor trivial fixes. Origin: git://codeaurora.org/kernel/msm.git Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits) netfilter: Remove ADVANCED dependency from NF_CONNTRACK_NETBIOS_NS ipv4: flush route cache after change accept_local sch_red: fix red_change Revert "udp: remove redundant variable" bridge: master device stuck in no-carrier state forever when in user-stp mode ipv4: Perform peer validation on cached route lookup. net/core: fix rollback handler in register_netdevice_notifier sch_red: fix red_calc_qavg_from_idle_time bonding: only use primary address for ARP ipv4: fix lockdep splat in rt_cache_seq_show sch_teql: fix lockdep splat net: fec: Select the FEC driver by default for i.MX SoCs isdn: avoid copying too long drvid isdn: make sure strings are null terminated netlabel: Fix build problems when IPv6 is not enabled sctp: better integer overflow check in sctp_auth_create_key() sctp: integer overflow in sctp_auth_create_key() ipv6: Set mcast_hops to IPV6_DEFAULT_MCASTHOPS when -1 was given. net: Fix corruption in /proc/*/net/dev_mcast mac80211: fix race between the AGG SM and the Tx data path ...
2011-12-01netfilter: Remove ADVANCED dependency from NF_CONNTRACK_NETBIOS_NSDavid S. Miller
firewalld in Fedora 16 needs this. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01ipv4: flush route cache after change accept_localPeter Pan(潘卫平)
After reset ipv4_devconf->data[IPV4_DEVCONF_ACCEPT_LOCAL] to 0, we should flush route cache, or it will continue receive packets with local source address, which should be dropped. Signed-off-by: Weiping Pan <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01sch_red: fix red_changeEric Dumazet
Le mercredi 30 novembre 2011 à 14:36 -0800, Stephen Hemminger a écrit : > (Almost) nobody uses RED because they can't figure it out. > According to Wikipedia, VJ says that: > "there are not one, but two bugs in classic RED." RED is useful for high throughput routers, I doubt many linux machines act as such devices. I was considering adding Adaptative RED (Sally Floyd, Ramakrishna Gummadi, Scott Shender), August 2001 In this version, maxp is dynamic (from 1% to 50%), and user only have to setup min_th (target average queue size) (max_th and wq (burst in linux RED) are automatically setup) By the way it seems we have a small bug in red_change() if (skb_queue_empty(&sch->q)) red_end_of_idle_period(&q->parms); First, if queue is empty, we should call red_start_of_idle_period(&q->parms); Second, since we dont use anymore sch->q, but q->qdisc, the test is meaningless. Oh well... [PATCH] sch_red: fix red_change() Now RED is classful, we must check q->qdisc->q.qlen, and if queue is empty, we start an idle period, not end it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-19 21:41:39 +0000