From bf7f6b0432871cb68f3e3f4961a33cc6be05bc75 Mon Sep 17 00:00:00 2001 From: "kiran.padwal@smartplayin.com" Date: Tue, 16 Sep 2014 17:15:38 +0530 Subject: ARM: dts: qcom: Add I2C dt node for MSM8974 and DB8074 board Add support for i2c controller on the DB8074 board. It also adds necessary DT support for i2c eeprom which is present on DB8074 board. Signed-off-by: Kiran Padwal Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-apq8074-dragonboard.dts | 21 +++++++++++++++++++++ arch/arm/boot/dts/qcom-msm8974.dtsi | 15 +++++++++++++-- 2 files changed, 34 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index b4dfb01fe6fb..47370494d0f8 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -22,6 +22,13 @@ pinctrl@fd510000 { + i2c11_pins: i2c11 { + mux { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + }; + }; + spi8_default: spi8_default { mosi { pins = "gpio45"; @@ -41,5 +48,19 @@ }; }; }; + + i2c@f9967000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c11_pins>; + pinctrl-names = "default"; + + eeprom: eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + read-only; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 69dca2aca25a..e265ec16a787 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -1,8 +1,8 @@ /dts-v1/; -#include "skeleton.dtsi" - +#include #include +#include "skeleton.dtsi" / { model = "Qualcomm MSM8974"; @@ -236,5 +236,16 @@ #interrupt-cells = <2>; interrupts = <0 208 0>; }; + + blsp_i2c11: i2c@f9967000 { + status = "disable"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9967000 0x1000>; + interrupts = <0 105 IRQ_TYPE_NONE>; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; }; }; -- cgit v1.2.3 From 0be5fef161151b8841d3e3d33d815695384a9451 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 17 Sep 2014 06:39:35 +0100 Subject: ARM: DT: apq8064: add support to sdcc4 for wlan. This patch adds sdcc4 node to enable wlan support on IFC6410 Signed-off-by: Srinivas Kandagatla Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 4 ++++ arch/arm/boot/dts/qcom-apq8064.dtsi | 38 ++++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 90db8af51f3a..27c7dfeec186 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -23,6 +23,10 @@ sdcc3: sdcc@12180000 { status = "okay"; }; + /* WLAN */ + sdcc4: sdcc@121c0000 { + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index b1e476ac5edf..f31d20b3ceb4 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -85,6 +85,13 @@ pinctrl-names = "default"; pinctrl-0 = <&ps_hold>; + sdc4_gpios: sdc4-gpios { + pios { + pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; + function = "sdc4"; + }; + }; + ps_hold: ps_hold { mux { pins = "gpio78"; @@ -226,6 +233,16 @@ qcom,ee = <0>; }; + sdcc4bam:dma@121c2000{ + compatible = "qcom,bam-v1.3.0"; + reg = <0x121c2000 0x8000>; + interrupts = <0 95 0>; + clocks = <&gcc SDC4_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + amba { compatible = "arm,amba-bus"; #address-cells = <1>; @@ -268,6 +285,27 @@ dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; dma-names = "tx", "rx"; }; + + sdcc4: sdcc@121c0000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x121c0000 0x2000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; + vmmc-supply = <&vsdcc_fixed>; + vqmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc4bam 2>, <&sdcc4bam 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&sdc4_gpios>; + }; }; }; }; -- cgit v1.2.3 From 8c3166f5d74b7936d29dc44f778e759c1b9fb43a Mon Sep 17 00:00:00 2001 From: "kiran.padwal@smartplayin.com" Date: Wed, 17 Sep 2014 16:00:25 +0530 Subject: ARM: DT: apq8064: Add i2c device nodes This patch adds i2c pinctrl DT node for IFC6410 board. It also adds necessary DT support for i2c eeprom which is present on IFC6410. Signed-off-by: Kiran Padwal Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 27 +++++++++++++++++++ arch/arm/boot/dts/qcom-apq8064.dtsi | 42 ++++++++++++++++++++++++++++++ 2 files changed, 69 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 27c7dfeec186..b396c8311b27 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -5,6 +5,33 @@ compatible = "qcom,apq8064-ifc6410", "qcom,apq8064"; soc { + pinctrl@800000 { + i2c1_pins: i2c1 { + mux { + pins = "gpio20", "gpio21"; + function = "gsbi1"; + }; + }; + }; + + gsbi@12440000 { + status = "okay"; + qcom,mode = ; + + i2c@12460000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + eeprom: eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + }; + }; + }; + gsbi@16600000 { status = "ok"; qcom,mode = ; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index f31d20b3ceb4..b3154c071652 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -163,6 +163,48 @@ regulator; }; + gsbi1: gsbi@12440000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12440000 0x100>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + i2c1: i2c@12460000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x12460000 0x1000>; + interrupts = <0 194 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gsbi2: gsbi@12480000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12480000 0x100>; + clocks = <&gcc GSBI2_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + i2c2: i2c@124a0000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x124a0000 0x1000>; + interrupts = <0 196 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + gsbi7: gsbi@16600000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; -- cgit v1.2.3 From 55602a09dd7e0cad5f85b0945bfcbac2898540a0 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Fri, 19 Sep 2014 16:50:50 -0700 Subject: ARM: DT: msm8660: Add sdcc nodes Add the sdcc nodes to support the SD card controller using pl180 mmci driver. We also add a temporary fixed regulator until the regulator driver is mainlined. Cc: Srinivas Kandagatla Signed-off-by: Stephen Boyd Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-msm8660-surf.dts | 12 ++++++++ arch/arm/boot/dts/qcom-msm8660.dtsi | 51 +++++++++++++++++++++++++++++++++ 2 files changed, 63 insertions(+) diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index ff7c53f58a06..e0883c376248 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -14,6 +14,18 @@ status = "ok"; }; }; + + amba { + /* eMMC */ + sdcc1: sdcc@12400000 { + status = "okay"; + }; + + /* External micro SD card */ + sdcc3: sdcc@12180000 { + status = "okay"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index a3fd26b8139f..0affd6193f56 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -2,6 +2,7 @@ /include/ "skeleton.dtsi" +#include #include #include @@ -146,5 +147,55 @@ }; }; }; + + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sdcc1: sdcc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x8000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <48000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + }; + + sdcc3: sdcc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x8000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + }; + }; }; + }; -- cgit v1.2.3 From aabff7bfe55afd01d71a5f11d4a84bd873c20f5e Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Fri, 19 Sep 2014 16:50:51 -0700 Subject: ARM: DT: msm8960: Add sdcc nodes Add the sdcc nodes to support the SD card controller using pl180 mmci driver. We also add a temporary fixed regulator until the regulator driver is mainlined. Cc: Srinivas Kandagatla Signed-off-by: Stephen Boyd Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-msm8960-cdp.dts | 12 ++++++++ arch/arm/boot/dts/qcom-msm8960.dtsi | 50 ++++++++++++++++++++++++++++++++++ 2 files changed, 62 insertions(+) diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index 8b10812c0cda..7f70fae90959 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -14,6 +14,18 @@ status = "ok"; }; }; + + amba { + /* eMMC */ + sdcc1: sdcc@12400000 { + status = "okay"; + }; + + /* External micro SD card */ + sdcc3: sdcc@12180000 { + status = "okay"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 2f677247744d..e1b0d5cd9e3c 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -2,6 +2,7 @@ /include/ "skeleton.dtsi" +#include #include #include @@ -188,5 +189,54 @@ clocks = <&gcc PRNG_CLK>; clock-names = "core"; }; + + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sdcc1: sdcc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x8000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + }; + + sdcc3: sdcc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x8000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + }; + }; }; }; -- cgit v1.2.3