From db0badc58e948b810c7a75cfcc48845e2949ee37 Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Mon, 18 Aug 2008 13:40:18 +0200
Subject: udf: Fix lock inversion between iprune_mutex and alloc_mutex (v2)

A memory allocation inside alloc_mutex must not recurse back into the
filesystem itself because that leads to lock inversion between iprune_mutex and
alloc_mutex (and thus to deadlocks - see traces below). alloc_mutex is actually
needed only to update allocation statistics in the superblock so we can drop it
before we start allocating memory for the inode.

tar           D ffff81015b9c8c90     0  6614   6612
 ffff8100d5a21a20 0000000000000086 0000000000000000 00000000ffff0000
 ffff81015b9c8c90 ffff81015b8f0cd0 ffff81015b9c8ee0 0000000000000000
 0000000000000003 0000000000000000 0000000000000000 0000000000000000
Call Trace:
 [<ffffffff803c1d8a>] __mutex_lock_slowpath+0x64/0x9b
 [<ffffffff803c1bef>] mutex_lock+0xa/0xb
 [<ffffffff8027f8c2>] shrink_icache_memory+0x38/0x200
 [<ffffffff80257742>] shrink_slab+0xe3/0x15b
 [<ffffffff802579db>] try_to_free_pages+0x221/0x30d
 [<ffffffff8025657e>] isolate_pages_global+0x0/0x31
 [<ffffffff8025324b>] __alloc_pages_internal+0x252/0x3ab
 [<ffffffff8026b08b>] cache_alloc_refill+0x22e/0x47b
 [<ffffffff8026ae37>] kmem_cache_alloc+0x3b/0x61
 [<ffffffff8026b15b>] cache_alloc_refill+0x2fe/0x47b
 [<ffffffff8026b34e>] __kmalloc+0x76/0x9c
 [<ffffffffa00751f2>] :udf:udf_new_inode+0x202/0x2e2
 [<ffffffffa007ae5e>] :udf:udf_create+0x2f/0x16d
 [<ffffffffa0078f27>] :udf:udf_lookup+0xa6/0xad
...
kswapd0       D ffff81015b9d9270     0   125      2
 ffff81015b903c28 0000000000000046 ffffffff8028cbb0 00000000fffffffb
 ffff81015b9d9270 ffff81015b8f0cd0 ffff81015b9d94c0 000000000271b490
 ffffe2000271b458 ffffe2000271b420 ffffe20002728dc8 ffffe20002728d90
Call Trace:
 [<ffffffff8028cbb0>] __set_page_dirty+0xeb/0xf5
 [<ffffffff8025403a>] get_dirty_limits+0x1d/0x22f
 [<ffffffff803c1d8a>] __mutex_lock_slowpath+0x64/0x9b
 [<ffffffff803c1bef>] mutex_lock+0xa/0xb
 [<ffffffffa0073f58>] :udf:udf_bitmap_free_blocks+0x47/0x1eb
 [<ffffffffa007df31>] :udf:udf_discard_prealloc+0xc6/0x172
 [<ffffffffa007875a>] :udf:udf_clear_inode+0x1e/0x48
 [<ffffffff8027f121>] clear_inode+0x6d/0xc4
 [<ffffffff8027f7f2>] dispose_list+0x56/0xee
 [<ffffffff8027fa5a>] shrink_icache_memory+0x1d0/0x200
 [<ffffffff80257742>] shrink_slab+0xe3/0x15b
 [<ffffffff80257e93>] kswapd+0x346/0x447
...

Reported-by: Tibor Tajti <tibor.tajti@gmail.com>
Reviewed-by: Ingo Oeser <ioe-lkml@rameria.de>
Signed-off-by: Jan Kara <jack@suse.cz>
---
 fs/udf/ialloc.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/udf/ialloc.c b/fs/udf/ialloc.c
index eb9cfa23dc3d..c4943c8988c2 100644
--- a/fs/udf/ialloc.c
+++ b/fs/udf/ialloc.c
@@ -111,6 +111,7 @@ struct inode *udf_new_inode(struct inode *dir, int mode, int *err)
 		lvhd->uniqueID = cpu_to_le64(uniqueID);
 		mark_buffer_dirty(sbi->s_lvid_bh);
 	}
+	mutex_unlock(&sbi->s_alloc_mutex);
 	inode->i_mode = mode;
 	inode->i_uid = current->fsuid;
 	if (dir->i_mode & S_ISGID) {
@@ -145,7 +146,6 @@ struct inode *udf_new_inode(struct inode *dir, int mode, int *err)
 	if (!iinfo->i_ext.i_data) {
 		iput(inode);
 		*err = -ENOMEM;
-		mutex_unlock(&sbi->s_alloc_mutex);
 		return NULL;
 	}
 	if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_AD_IN_ICB))
@@ -158,7 +158,6 @@ struct inode *udf_new_inode(struct inode *dir, int mode, int *err)
 		iinfo->i_crtime = current_fs_time(inode->i_sb);
 	insert_inode_hash(inode);
 	mark_inode_dirty(inode);
-	mutex_unlock(&sbi->s_alloc_mutex);
 
 	if (DQUOT_ALLOC_INODE(inode)) {
 		DQUOT_DROP(inode);
-- 
cgit v1.2.3


From 97e1cfb08616987878f91a46cefdd7fc5fa3dba1 Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Mon, 18 Aug 2008 13:44:48 +0200
Subject: udf: Fix error paths in udf_new_inode()

I case we failed to allocate memory for inode when creating it, we did not
properly free block already allocated for this inode. Move memory allocation
before the block allocation which fixes this issue (thanks for the idea go to
Ingo Oeser <ioe-lkml@rameria.de>). Also remove a few superfluous
initializations already done in udf_alloc_inode().

Reviewed-by: Ingo Oeser <ioe-lkml@rameria.de>
Signed-off-by: Jan Kara <jack@suse.cz>
---
 fs/udf/ialloc.c | 41 ++++++++++++++++++-----------------------
 1 file changed, 18 insertions(+), 23 deletions(-)

diff --git a/fs/udf/ialloc.c b/fs/udf/ialloc.c
index c4943c8988c2..a4f2b3ce45b0 100644
--- a/fs/udf/ialloc.c
+++ b/fs/udf/ialloc.c
@@ -76,11 +76,24 @@ struct inode *udf_new_inode(struct inode *dir, int mode, int *err)
 	*err = -ENOSPC;
 
 	iinfo = UDF_I(inode);
-	iinfo->i_unique = 0;
-	iinfo->i_lenExtents = 0;
-	iinfo->i_next_alloc_block = 0;
-	iinfo->i_next_alloc_goal = 0;
-	iinfo->i_strat4096 = 0;
+	if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_EXTENDED_FE)) {
+		iinfo->i_efe = 1;
+		if (UDF_VERS_USE_EXTENDED_FE > sbi->s_udfrev)
+			sbi->s_udfrev = UDF_VERS_USE_EXTENDED_FE;
+		iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
+					    sizeof(struct extendedFileEntry),
+					    GFP_KERNEL);
+	} else {
+		iinfo->i_efe = 0;
+		iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
+					    sizeof(struct fileEntry),
+					    GFP_KERNEL);
+	}
+	if (!iinfo->i_ext.i_data) {
+		iput(inode);
+		*err = -ENOMEM;
+		return NULL;
+	}
 
 	block = udf_new_block(dir->i_sb, NULL,
 			      dinfo->i_location.partitionReferenceNum,
@@ -130,24 +143,6 @@ struct inode *udf_new_inode(struct inode *dir, int mode, int *err)
 	iinfo->i_lenEAttr = 0;
 	iinfo->i_lenAlloc = 0;
 	iinfo->i_use = 0;
-	if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_EXTENDED_FE)) {
-		iinfo->i_efe = 1;
-		if (UDF_VERS_USE_EXTENDED_FE > sbi->s_udfrev)
-			sbi->s_udfrev = UDF_VERS_USE_EXTENDED_FE;
-		iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
-					    sizeof(struct extendedFileEntry),
-					    GFP_KERNEL);
-	} else {
-		iinfo->i_efe = 0;
-		iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
-					    sizeof(struct fileEntry),
-					    GFP_KERNEL);
-	}
-	if (!iinfo->i_ext.i_data) {
-		iput(inode);
-		*err = -ENOMEM;
-		return NULL;
-	}
 	if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_AD_IN_ICB))
 		iinfo->i_alloc_type = ICBTAG_FLAG_AD_IN_ICB;
 	else if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_SHORT_AD))
-- 
cgit v1.2.3


From bfad9ceac5d11318c99ae8a0d1e926a380a56edd Mon Sep 17 00:00:00 2001
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
Date: Sat, 2 Aug 2008 19:49:40 +0200
Subject: [SCSI] sd: select CRC_T10DIF only when necessary

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index c7f06298bd3c..4e0322b1c1ea 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -63,7 +63,7 @@ comment "SCSI support type (disk, tape, CD-ROM)"
 config BLK_DEV_SD
 	tristate "SCSI disk support"
 	depends on SCSI
-	select CRC_T10DIF
+	select CRC_T10DIF if BLK_DEV_INTEGRITY
 	---help---
 	  If you want to use SCSI hard disks, Fibre Channel disks,
 	  Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
-- 
cgit v1.2.3


From d4538817287e56abc938900886301a5bdfafbfcd Mon Sep 17 00:00:00 2001
From: Christof Schmitt <christof.schmitt@de.ibm.com>
Date: Thu, 21 Aug 2008 13:43:32 +0200
Subject: [SCSI] zfcp: Fix request queue locking

The request queue lock can be acquired from softirq context when the
SCSI midlayer issues commands. Disable softirqs for this lock when
commands are issued from zfcp.

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Martin Petermann <martin@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/s390/scsi/zfcp_fsf.c  | 56 +++++++++++++++++++++----------------------
 drivers/s390/scsi/zfcp_qdio.c |  4 ++--
 2 files changed, 30 insertions(+), 30 deletions(-)

diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 19c1ca913874..aad33241a2ea 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -710,10 +710,10 @@ static void zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *req)
 
 static int zfcp_fsf_sbal_check(struct zfcp_qdio_queue *queue)
 {
-	spin_lock(&queue->lock);
+	spin_lock_bh(&queue->lock);
 	if (atomic_read(&queue->count))
 		return 1;
-	spin_unlock(&queue->lock);
+	spin_unlock_bh(&queue->lock);
 	return 0;
 }
 
@@ -722,13 +722,13 @@ static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter)
 	long ret;
 	struct zfcp_qdio_queue *req_q = &adapter->req_q;
 
-	spin_unlock(&req_q->lock);
+	spin_unlock_bh(&req_q->lock);
 	ret = wait_event_interruptible_timeout(adapter->request_wq,
 					zfcp_fsf_sbal_check(req_q), 5 * HZ);
 	if (ret > 0)
 		return 0;
 
-	spin_lock(&req_q->lock);
+	spin_lock_bh(&req_q->lock);
 	return -EIO;
 }
 
@@ -870,7 +870,7 @@ int zfcp_fsf_status_read(struct zfcp_adapter *adapter)
 	volatile struct qdio_buffer_element *sbale;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
@@ -910,7 +910,7 @@ failed_buf:
 	zfcp_fsf_req_free(req);
 	zfcp_hba_dbf_event_fsf_unsol("fail", adapter, NULL);
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -1106,7 +1106,7 @@ int zfcp_fsf_send_ct(struct zfcp_send_ct *ct, mempool_t *pool,
 	struct zfcp_fsf_req *req;
 	int ret = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
@@ -1148,7 +1148,7 @@ failed_send:
 	if (erp_action)
 		erp_action->fsf_req = NULL;
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return ret;
 }
 
@@ -1263,7 +1263,7 @@ int zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action)
 	struct zfcp_adapter *adapter = erp_action->adapter;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (!atomic_read(&adapter->req_q.count))
 		goto out;
 	req = zfcp_fsf_req_create(adapter,
@@ -1295,7 +1295,7 @@ int zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action)
 		erp_action->fsf_req = NULL;
 	}
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -1306,7 +1306,7 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter,
 	struct zfcp_fsf_req *req = NULL;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
@@ -1334,7 +1334,7 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter,
 	zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
 	retval = zfcp_fsf_req_send(req);
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	if (!retval)
 		wait_event(req->completion_wq,
 			   req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
@@ -1359,7 +1359,7 @@ int zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action)
 	if (!(adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT))
 		return -EOPNOTSUPP;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (!atomic_read(&adapter->req_q.count))
 		goto out;
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA,
@@ -1385,7 +1385,7 @@ int zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action)
 		erp_action->fsf_req = NULL;
 	}
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -1405,7 +1405,7 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter,
 	if (!(adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT))
 		return -EOPNOTSUPP;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (!atomic_read(&adapter->req_q.count))
 		goto out;
 
@@ -1427,7 +1427,7 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter,
 	zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
 	retval = zfcp_fsf_req_send(req);
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	if (!retval)
 		wait_event(req->completion_wq,
 			   req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
@@ -1531,7 +1531,7 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action)
 	struct zfcp_fsf_req *req;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
@@ -1562,7 +1562,7 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action)
 		erp_action->fsf_req = NULL;
 	}
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -1603,7 +1603,7 @@ int zfcp_fsf_close_port(struct zfcp_erp_action *erp_action)
 	struct zfcp_fsf_req *req;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
@@ -1633,7 +1633,7 @@ int zfcp_fsf_close_port(struct zfcp_erp_action *erp_action)
 		erp_action->fsf_req = NULL;
 	}
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -1700,7 +1700,7 @@ int zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action)
 	struct zfcp_fsf_req *req;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
@@ -1731,7 +1731,7 @@ int zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action)
 		erp_action->fsf_req = NULL;
 	}
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -1875,7 +1875,7 @@ int zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action)
 	struct zfcp_fsf_req *req;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
@@ -1910,7 +1910,7 @@ int zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action)
 		erp_action->fsf_req = NULL;
 	}
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -1965,7 +1965,7 @@ int zfcp_fsf_close_unit(struct zfcp_erp_action *erp_action)
 	struct zfcp_fsf_req *req;
 	int retval = -EIO;
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_LUN,
@@ -1995,7 +1995,7 @@ int zfcp_fsf_close_unit(struct zfcp_erp_action *erp_action)
 		erp_action->fsf_req = NULL;
 	}
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 	return retval;
 }
 
@@ -2417,7 +2417,7 @@ struct zfcp_fsf_req *zfcp_fsf_control_file(struct zfcp_adapter *adapter,
 		return ERR_PTR(-EINVAL);
 	}
 
-	spin_lock(&adapter->req_q.lock);
+	spin_lock_bh(&adapter->req_q.lock);
 	if (zfcp_fsf_req_sbal_get(adapter))
 		goto out;
 
@@ -2447,7 +2447,7 @@ struct zfcp_fsf_req *zfcp_fsf_control_file(struct zfcp_adapter *adapter,
 	zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
 	retval = zfcp_fsf_req_send(req);
 out:
-	spin_unlock(&adapter->req_q.lock);
+	spin_unlock_bh(&adapter->req_q.lock);
 
 	if (!retval) {
 		wait_event(req->completion_wq,
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index d6dbd653fde9..69d632d851d9 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -423,9 +423,9 @@ void zfcp_qdio_close(struct zfcp_adapter *adapter)
 
 	/* clear QDIOUP flag, thus do_QDIO is not called during qdio_shutdown */
 	req_q = &adapter->req_q;
-	spin_lock(&req_q->lock);
+	spin_lock_bh(&req_q->lock);
 	atomic_clear_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status);
-	spin_unlock(&req_q->lock);
+	spin_unlock_bh(&req_q->lock);
 
 	qdio_shutdown(adapter->ccw_device, QDIO_FLAG_CLEANUP_USING_CLEAR);
 
-- 
cgit v1.2.3


From 47f7bba52b01dd881fbd17b4b50c89ecf186eee2 Mon Sep 17 00:00:00 2001
From: Christof Schmitt <christof.schmitt@de.ibm.com>
Date: Thu, 21 Aug 2008 13:43:33 +0200
Subject: [SCSI] zfcp: Correctly query end flag in gpn_ft response

When the last port entry in the gpn_ft response is already a known
port, the eval function would skip the end flag and try to attach
ports with wwpn 0. Fix this by checking the flag first.

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Martin Petermann <martin@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/s390/scsi/zfcp_fc.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index e984469bb98b..27edabe5b20a 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -475,7 +475,7 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft)
 	struct zfcp_adapter *adapter = ct->port->adapter;
 	struct zfcp_port *port, *tmp;
 	u32 d_id;
-	int ret = 0, x;
+	int ret = 0, x, last = 0;
 
 	if (ct->status)
 		return -EIO;
@@ -492,12 +492,13 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft)
 	down(&zfcp_data.config_sema);
 
 	/* first entry is the header */
-	for (x = 1; x < ZFCP_GPN_FT_MAX_ENTRIES; x++) {
+	for (x = 1; x < ZFCP_GPN_FT_MAX_ENTRIES && !last; x++) {
 		if (x % (ZFCP_GPN_FT_ENTRIES + 1))
 			acc++;
 		else
 			acc = sg_virt(++sg);
 
+		last = acc->control & 0x80;
 		d_id = acc->port_id[0] << 16 | acc->port_id[1] << 8 |
 		       acc->port_id[2];
 
@@ -513,8 +514,6 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft)
 			ret = PTR_ERR(port);
 		else
 			zfcp_erp_port_reopen(port, 0, 149, NULL);
-		if (acc->control & 0x80) /* last entry */
-			break;
 	}
 
 	zfcp_erp_wait(adapter);
-- 
cgit v1.2.3


From f48bf7fb00f74d93105ba69522a3f6c9435d6af3 Mon Sep 17 00:00:00 2001
From: Christof Schmitt <christof.schmitt@de.ibm.com>
Date: Thu, 21 Aug 2008 13:43:34 +0200
Subject: [SCSI] zfcp: Simplify ccw notify handler

The notify handler does not change the list of adapters, it only
triggers erp actions to open or shutdown the adapter. We don't
need to hold the config semaphore and wait for the erp to complete.

This is a prerequisite for a fix in the s390 common i/o code.

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Martin Petermann <martin@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/s390/scsi/zfcp_ccw.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index 391dd29749f8..51b6a05f4d12 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -152,10 +152,8 @@ static int zfcp_ccw_set_offline(struct ccw_device *ccw_device)
  */
 static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event)
 {
-	struct zfcp_adapter *adapter;
+	struct zfcp_adapter *adapter = dev_get_drvdata(&ccw_device->dev);
 
-	down(&zfcp_data.config_sema);
-	adapter = dev_get_drvdata(&ccw_device->dev);
 	switch (event) {
 	case CIO_GONE:
 		dev_warn(&adapter->ccw_device->dev, "device gone\n");
@@ -174,8 +172,6 @@ static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event)
 					89, NULL);
 		break;
 	}
-	zfcp_erp_wait(adapter);
-	up(&zfcp_data.config_sema);
 	return 1;
 }
 
-- 
cgit v1.2.3


From 9528539cc2d506aa232b0d93881ac4d19738752f Mon Sep 17 00:00:00 2001
From: Swen Schillig <swen@vnet.ibm.com>
Date: Thu, 21 Aug 2008 13:43:35 +0200
Subject: [SCSI] zfcp: Fix reference counter for remote ports

Fix the remote port reference counter handling during ELS ADISC
commands and find the remote port by WWPN not by D_IDs that could
change.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/s390/scsi/zfcp_fc.c | 25 +++++++++----------------
 1 file changed, 9 insertions(+), 16 deletions(-)

diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index 27edabe5b20a..05e6b09c48f3 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -39,18 +39,6 @@ struct zfcp_gpn_ft {
 	struct scatterlist sg_resp[ZFCP_GPN_FT_BUFFERS];
 };
 
-static struct zfcp_port *zfcp_get_port_by_did(struct zfcp_adapter *adapter,
-					      u32 d_id)
-{
-	struct zfcp_port *port;
-
-	list_for_each_entry(port, &adapter->port_list_head, list)
-		if ((port->d_id == d_id) &&
-		    !atomic_test_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status))
-			return port;
-	return NULL;
-}
-
 static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
 				   struct fcp_rscn_element *elem)
 {
@@ -341,12 +329,13 @@ void zfcp_test_link(struct zfcp_port *port)
 
 	zfcp_port_get(port);
 	retval = zfcp_fc_adisc(port);
-	if (retval == 0 || retval == -EBUSY)
+	if (retval == 0)
 		return;
 
 	/* send of ADISC was not possible */
 	zfcp_port_put(port);
-	zfcp_erp_port_forced_reopen(port, 0, 65, NULL);
+	if (retval != -EBUSY)
+		zfcp_erp_port_forced_reopen(port, 0, 65, NULL);
 }
 
 static int zfcp_scan_get_nameserver(struct zfcp_adapter *adapter)
@@ -503,9 +492,13 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft)
 		       acc->port_id[2];
 
 		/* skip the adapter's port and known remote ports */
-		if (acc->wwpn == fc_host_port_name(adapter->scsi_host) ||
-		     zfcp_get_port_by_did(adapter, d_id))
+		if (acc->wwpn == fc_host_port_name(adapter->scsi_host))
 			continue;
+		port = zfcp_get_port_by_wwpn(adapter, acc->wwpn);
+		if (port) {
+			zfcp_port_get(port);
+			continue;
+		}
 
 		port = zfcp_port_enqueue(adapter, acc->wwpn,
 					 ZFCP_STATUS_PORT_DID_DID |
-- 
cgit v1.2.3


From 6139308dca9437975125290698cb9306240f525c Mon Sep 17 00:00:00 2001
From: Swen Schillig <swen@vnet.ibm.com>
Date: Thu, 21 Aug 2008 13:43:36 +0200
Subject: [SCSI] zfcp: channel cannot be detached due to refcount imbalance

Due to an imbalance of the nameserver refcounting, channel devices
couldn't be take offline anymore after the channel was activated.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/s390/scsi/zfcp_fc.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index 05e6b09c48f3..56196c98c07b 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -352,7 +352,6 @@ static int zfcp_scan_get_nameserver(struct zfcp_adapter *adapter)
 		if (ret)
 			return ret;
 		zfcp_erp_wait(adapter);
-		zfcp_port_put(adapter->nameserver_port);
 	}
 	return !atomic_test_mask(ZFCP_STATUS_COMMON_UNBLOCKED,
 				  &adapter->nameserver_port->status);
-- 
cgit v1.2.3


From 025270f0eaa2def673747ed6f77cca41f694f354 Mon Sep 17 00:00:00 2001
From: Hirofumi Nakagawa <hnakagawa@miraclelinux.com>
Date: Thu, 21 Aug 2008 13:43:37 +0200
Subject: [SCSI] zfcp: Remove duplicated unlikely() macros.

Some drivers have duplicated unlikely() macros. IS_ERR() already
has unlikely() in itself. This patch cleans up such pointless
codes although there is no real effect on the kernel's behaviour.

Signed-off-by: Hirofumi Nakagawa <hnakagawa@miraclelinux.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/s390/scsi/zfcp_fsf.c | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index aad33241a2ea..49dbeb754e5f 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -877,7 +877,7 @@ int zfcp_fsf_status_read(struct zfcp_adapter *adapter)
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_UNSOLICITED_STATUS,
 				  ZFCP_REQ_NO_QTCB,
 				  adapter->pool.fsf_req_status_read);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -988,7 +988,7 @@ struct zfcp_fsf_req *zfcp_fsf_abort_fcp_command(unsigned long old_req_id,
 		goto out;
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND,
 				  req_flags, adapter->pool.fsf_req_abort);
-	if (unlikely(IS_ERR(req)))
+	if (IS_ERR(req))
 		goto out;
 
 	if (unlikely(!(atomic_read(&unit->status) &
@@ -1112,7 +1112,7 @@ int zfcp_fsf_send_ct(struct zfcp_send_ct *ct, mempool_t *pool,
 
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_GENERIC,
 				  ZFCP_REQ_AUTO_CLEANUP, pool);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		ret = PTR_ERR(req);
 		goto out;
 	}
@@ -1223,7 +1223,7 @@ int zfcp_fsf_send_els(struct zfcp_send_els *els)
 		goto out;
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_ELS,
 				  ZFCP_REQ_AUTO_CLEANUP, NULL);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		ret = PTR_ERR(req);
 		goto out;
 	}
@@ -1270,7 +1270,7 @@ int zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action)
 				  FSF_QTCB_EXCHANGE_CONFIG_DATA,
 				  ZFCP_REQ_AUTO_CLEANUP,
 				  adapter->pool.fsf_req_erp);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1312,7 +1312,7 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter,
 
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_CONFIG_DATA,
 				  0, NULL);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1365,7 +1365,7 @@ int zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action)
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA,
 				  ZFCP_REQ_AUTO_CLEANUP,
 				  adapter->pool.fsf_req_erp);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1411,7 +1411,7 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter,
 
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, 0,
 				  NULL);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1539,7 +1539,7 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action)
 				  FSF_QTCB_OPEN_PORT_WITH_DID,
 				  ZFCP_REQ_AUTO_CLEANUP,
 				  adapter->pool.fsf_req_erp);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1610,7 +1610,7 @@ int zfcp_fsf_close_port(struct zfcp_erp_action *erp_action)
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_PORT,
 				  ZFCP_REQ_AUTO_CLEANUP,
 				  adapter->pool.fsf_req_erp);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1707,7 +1707,7 @@ int zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action)
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_PHYSICAL_PORT,
 				  ZFCP_REQ_AUTO_CLEANUP,
 				  adapter->pool.fsf_req_erp);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1882,7 +1882,7 @@ int zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action)
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_OPEN_LUN,
 				  ZFCP_REQ_AUTO_CLEANUP,
 				  adapter->pool.fsf_req_erp);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1971,7 +1971,7 @@ int zfcp_fsf_close_unit(struct zfcp_erp_action *erp_action)
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_LUN,
 				  ZFCP_REQ_AUTO_CLEANUP,
 				  adapter->pool.fsf_req_erp);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -2228,7 +2228,7 @@ int zfcp_fsf_send_fcp_command_task(struct zfcp_adapter *adapter,
 		goto out;
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags,
 				  adapter->pool.fsf_req_scsi);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -2351,7 +2351,7 @@ struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_adapter *adapter,
 		goto out;
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags,
 				  adapter->pool.fsf_req_scsi);
-	if (unlikely(IS_ERR(req)))
+	if (IS_ERR(req))
 		goto out;
 
 	req->status |= ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT;
@@ -2422,7 +2422,7 @@ struct zfcp_fsf_req *zfcp_fsf_control_file(struct zfcp_adapter *adapter,
 		goto out;
 
 	req = zfcp_fsf_req_create(adapter, fsf_cfdc->command, 0, NULL);
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = -EPERM;
 		goto out;
 	}
-- 
cgit v1.2.3


From c7dbb627a2505f42b2e6b3581f3716d73453dd0c Mon Sep 17 00:00:00 2001
From: Mike Anderson <andmike@linux.vnet.ibm.com>
Date: Tue, 12 Aug 2008 12:11:57 -0700
Subject: [SCSI] scsi_dh: make check_sense return ADD_TO_MLQUEUE

Change scsi_dh check_sense functions to return ADD_TO_MLQUEUE
to allow retries to occur without restriction of blk_noretry_request
check.

Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com>
Acked-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/device_handler/scsi_dh_alua.c | 12 ++++++------
 drivers/scsi/device_handler/scsi_dh_emc.c  |  4 ++--
 drivers/scsi/device_handler/scsi_dh_rdac.c |  4 ++--
 3 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 994da56fffed..708e475896b9 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -425,7 +425,7 @@ static int alua_check_sense(struct scsi_device *sdev,
 			/*
 			 * LUN Not Accessible - ALUA state transition
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0b)
 			/*
 			 * LUN Not Accessible -- Target port in standby state
@@ -447,18 +447,18 @@ static int alua_check_sense(struct scsi_device *sdev,
 			/*
 			 * Power On, Reset, or Bus Device Reset, just retry.
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06) {
 			/*
 			 * ALUA state changed
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		}
 		if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07) {
 			/*
 			 * Implicit ALUA state transition failed
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		}
 		break;
 	}
@@ -490,7 +490,7 @@ static int alua_stpg(struct scsi_device *sdev, int state,
 		if (!err)
 			return SCSI_DH_IO;
 		err = alua_check_sense(sdev, &sense_hdr);
-		if (retry > 0 && err == NEEDS_RETRY) {
+		if (retry > 0 && err == ADD_TO_MLQUEUE) {
 			retry--;
 			goto retry;
 		}
@@ -535,7 +535,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
 			return SCSI_DH_IO;
 
 		err = alua_check_sense(sdev, &sense_hdr);
-		if (err == NEEDS_RETRY)
+		if (err == ADD_TO_MLQUEUE)
 			goto retry;
 		sdev_printk(KERN_INFO, sdev,
 			    "%s: rtpg sense code %02x/%02x/%02x\n",
diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index b9d23e9e9a44..ef693e8412e9 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -439,7 +439,7 @@ static int clariion_check_sense(struct scsi_device *sdev,
 			 * Unit Attention Code. This is the first IO
 			 * to the new path, so just retry.
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		break;
 	}
 
@@ -514,7 +514,7 @@ retry:
 			return SCSI_DH_IO;
 
 		err = clariion_check_sense(sdev, &sshdr);
-		if (retry > 0 && err == NEEDS_RETRY) {
+		if (retry > 0 && err == ADD_TO_MLQUEUE) {
 			retry--;
 			goto retry;
 		}
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 2dee69da35cf..6e2f130d56de 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -551,7 +551,7 @@ static int rdac_check_sense(struct scsi_device *sdev,
 			 *
 			 * Just retry and wait.
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		break;
 	case ILLEGAL_REQUEST:
 		if (sense_hdr->asc == 0x94 && sense_hdr->ascq == 0x01) {
@@ -568,7 +568,7 @@ static int rdac_check_sense(struct scsi_device *sdev,
 			/*
 			 * Power On, Reset, or Bus Device Reset, just retry.
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		break;
 	}
 	/* success just means we do not care what scsi-ml does */
-- 
cgit v1.2.3


From bb0003c1e189d5766b6b39299b08c690c985c4dc Mon Sep 17 00:00:00 2001
From: Mike Anderson <andmike@linux.vnet.ibm.com>
Date: Tue, 12 Aug 2008 12:11:58 -0700
Subject: [SCSI] make scsi_check_sense HARDWARE_ERROR return ADD_TO_MLQUEUE on
 retry

Change scsi_check_sense HARDWARE_ERROR check to return ADD_TO_MLQUEUE
if device->retry_hwerror is set to allow retries to occur without
restriction of blk_noretry_request check.

Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/scsi_error.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 880051c89bde..39ce3aba1dac 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -391,7 +391,7 @@ static int scsi_check_sense(struct scsi_cmnd *scmd)
 
 	case HARDWARE_ERROR:
 		if (scmd->device->retry_hwerror)
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		else
 			return SUCCESS;
 
-- 
cgit v1.2.3


From 01b291bd66564b4bd826326af6bd0b6d17e99439 Mon Sep 17 00:00:00 2001
From: James Bottomley <James.Bottomley@HansenPartnership.com>
Date: Thu, 21 Aug 2008 15:14:14 -0500
Subject: [SCSI] fix check of PQ and PDT bits for WLUNs

For IBM z series certain LUNs can no longer be accessed.

This is because kernel version 2.6.19 a check was introduced not to
create a generic SCSI device for devices that return PQ=1 and
PDT=0x1f. For WLUNs (see SAM-3, p. 41ff) generic SCSI devices should
be created unconditionally without looking at the PQ bit, so add a
check for WLUNs in with this test.

Acked-by: Martin Petermann <martin@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/scsi_scan.c |  3 ++-
 include/scsi/scsi.h      | 14 ++++++++++++++
 2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 84b4879cff11..34d0de6cd511 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1080,7 +1080,8 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
 	 * PDT=1Fh none (no FDD connected to the requested logical unit)
 	 */
 	if (((result[0] >> 5) == 1 || starget->pdt_1f_for_no_lun) &&
-	     (result[0] & 0x1f) == 0x1f) {
+	    (result[0] & 0x1f) == 0x1f &&
+	    !scsi_is_wlun(lun)) {
 		SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
 					"scsi scan: peripheral device type"
 					" of 31, no device added\n"));
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 5c40cc537d4c..192f8716aa9e 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -308,6 +308,20 @@ struct scsi_lun {
 	__u8 scsi_lun[8];
 };
 
+/*
+ * The Well Known LUNS (SAM-3) in our int representation of a LUN
+ */
+#define SCSI_W_LUN_BASE 0xc100
+#define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1)
+#define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2)
+#define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3)
+
+static inline int scsi_is_wlun(unsigned int lun)
+{
+	return (lun & 0xff00) == SCSI_W_LUN_BASE;
+}
+
+
 /*
  *  MESSAGE CODES
  */
-- 
cgit v1.2.3


From a9b0623357d2faa49a0f862154ba36c42c4bad2b Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 2 Sep 2008 10:19:29 +0200
Subject: pcm037: add rts/cts support for serial port

We have rts/cts pins on the first serial port on the pcm037. Enable it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/pcm037.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 0a152ed15a85..df8582a6231b 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -54,7 +54,7 @@ static struct platform_device pcm037_flash = {
 };
 
 static struct imxuart_platform_data uart_pdata = {
-	.flags = 0,
+	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 static struct platform_device *devices[] __initdata = {
-- 
cgit v1.2.3


From c45e7d7be891fe94e13d0e7aeee3e0e4ee7118f4 Mon Sep 17 00:00:00 2001
From: Darius Augulis <augulis.darius@gmail.com>
Date: Tue, 2 Sep 2008 10:19:29 +0200
Subject: i.MX serial: fix init failure

Adds extra "out" label to probe function after calling .init form platform data.
Because .init can return error number caused by gpio request fail.

Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/serial/imx.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 6a29f9330a73..20189c447e92 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -1133,13 +1133,19 @@ static int serial_imx_probe(struct platform_device *pdev)
 	if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
 		sport->have_rtscts = 1;
 
-	if (pdata->init)
-		pdata->init(pdev);
+	if (pdata->init) {
+		ret = pdata->init(pdev);
+		if (ret)
+			goto clkput;
+	}
 
 	uart_add_one_port(&imx_reg, &sport->port);
 	platform_set_drvdata(pdev, &sport->port);
 
 	return 0;
+clkput:
+	clk_put(sport->clk);
+	clk_disable(sport->clk);
 unmap:
 	iounmap(sport->port.membase);
 free:
-- 
cgit v1.2.3


From 4411805b13d4b8c31870b276c2730d585b062db7 Mon Sep 17 00:00:00 2001
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Mon, 28 Jul 2008 12:10:34 +0200
Subject: imx serial: set RXD mux bit on i.MX27 and i.MX31

RX in i.MX27 and i.MX31 UART lines does not work unless the
"RXD  Muxed Input Select" bit is set on i.MX27 and i.MX31 processors.

This patch sets the missing RXD mux bit in the UCR3 register.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/serial/imx.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 20189c447e92..312653e2f715 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -127,8 +127,13 @@
 #define  UCR3_RXDSEN	 (1<<6)  /* Receive status interrupt enable */
 #define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
 #define  UCR3_AWAKEN	 (1<<4)  /* Async wake interrupt enable */
-#define  UCR3_REF25 	 (1<<3)  /* Ref freq 25 MHz */
-#define  UCR3_REF30 	 (1<<2)  /* Ref Freq 30 MHz */
+#ifdef CONFIG_ARCH_IMX
+#define  UCR3_REF25 	 (1<<3)  /* Ref freq 25 MHz, only on mx1 */
+#define  UCR3_REF30 	 (1<<2)  /* Ref Freq 30 MHz, only on mx1 */
+#endif
+#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
+#define  UCR3_RXDMUXSEL	 (1<<2)  /* RXD Muxed Input Select, on mx2/mx3 */
+#endif
 #define  UCR3_INVT  	 (1<<1)  /* Inverted Infrared transmission */
 #define  UCR3_BPEN  	 (1<<0)  /* Preset registers enable */
 #define  UCR4_CTSTL_32   (32<<10) /* CTS trigger level (32 chars) */
@@ -598,6 +603,12 @@ static int imx_startup(struct uart_port *port)
 	temp |= (UCR2_RXEN | UCR2_TXEN);
 	writel(temp, sport->port.membase + UCR2);
 
+#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
+	temp = readl(sport->port.membase + UCR3);
+	temp |= UCR3_RXDMUXSEL;
+	writel(temp, sport->port.membase + UCR3);
+#endif
+
 	/*
 	 * Enable modem status interrupts
 	 */
-- 
cgit v1.2.3


From 9fbe604456c5ae21768f1c98379e1b81c72adcd3 Mon Sep 17 00:00:00 2001
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Mon, 28 Jul 2008 21:26:01 +0200
Subject: imx serial: fix rts handling for non imx1 based hardware

The interrupt handler for muxed interrupts (imx2/imx3) was calling
the rts handling subroutine if the RTSS bit was set.
(Which indicates the status of the RTS line), leading to an
interrupt flood on RTS bit low.

This patch fixes the problem by looking at the RTSD bit instead,
indicating a change in the RTS line.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/serial/imx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 312653e2f715..3f90f1bbbbcd 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -450,7 +450,7 @@ static irqreturn_t imx_int(int irq, void *dev_id)
 			readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN)
 		imx_txint(irq, dev_id);
 
-	if (sts & USR1_RTSS)
+	if (sts & USR1_RTSD)
 		imx_rtsint(irq, dev_id);
 
 	return IRQ_HANDLED;
-- 
cgit v1.2.3


From c9257433f2eaf8803a1f3d3be5d984232db41ffe Mon Sep 17 00:00:00 2001
From: Vladimir Sokolovsky <vlad@mellanox.co.il>
Date: Tue, 2 Sep 2008 13:38:29 -0700
Subject: mlx4_core: Set RAE and init mtt_sz field in FRMR MPT entries

Set the RAE (remote access enable) bit and correctly initialize the
MTT size in MPT entries being set up for fast register memory
regions.  Otherwise the callers can't enable remote access and in fact
can't fast register at all (since the HCA will think no MTT entries
are allocated).

Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/net/mlx4/mr.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/mlx4/mr.c b/drivers/net/mlx4/mr.c
index 62071d9c4a55..644adf074a35 100644
--- a/drivers/net/mlx4/mr.c
+++ b/drivers/net/mlx4/mr.c
@@ -67,7 +67,8 @@ struct mlx4_mpt_entry {
 #define MLX4_MPT_FLAG_PHYSICAL	    (1 <<  9)
 #define MLX4_MPT_FLAG_REGION	    (1 <<  8)
 
-#define MLX4_MPT_PD_FLAG_FAST_REG   (1 << 26)
+#define MLX4_MPT_PD_FLAG_FAST_REG   (1 << 27)
+#define MLX4_MPT_PD_FLAG_RAE	    (1 << 28)
 #define MLX4_MPT_PD_FLAG_EN_INV	    (3 << 24)
 
 #define MLX4_MTT_FLAG_PRESENT		1
@@ -348,7 +349,10 @@ int mlx4_mr_enable(struct mlx4_dev *dev, struct mlx4_mr *mr)
 	if (mr->mtt.order >= 0 && mr->mtt.page_shift == 0) {
 		/* fast register MR in free state */
 		mpt_entry->flags    |= cpu_to_be32(MLX4_MPT_FLAG_FREE);
-		mpt_entry->pd_flags |= cpu_to_be32(MLX4_MPT_PD_FLAG_FAST_REG);
+		mpt_entry->pd_flags |= cpu_to_be32(MLX4_MPT_PD_FLAG_FAST_REG |
+						   MLX4_MPT_PD_FLAG_RAE);
+		mpt_entry->mtt_sz    = cpu_to_be32((1 << mr->mtt.order) *
+						   MLX4_MTT_ENTRY_PER_SEG);
 	} else {
 		mpt_entry->flags    |= cpu_to_be32(MLX4_MPT_FLAG_SW_OWNS);
 	}
-- 
cgit v1.2.3


From 5c89468c12899b84886cb47eec93f0c88e0f896a Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Mon, 8 Sep 2008 19:44:17 +0200
Subject: udf: add llseek method

UDF currently doesn't set a llseek method for regular files, which
means it will fall back to default_llseek.  This means no one can seek
beyond 2 Gigabytes on udf, and that there's not protection vs
the i_size updates from writers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
---
 fs/udf/file.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/udf/file.c b/fs/udf/file.c
index 0ed6e146a0d9..eb91f3b70320 100644
--- a/fs/udf/file.c
+++ b/fs/udf/file.c
@@ -211,6 +211,7 @@ const struct file_operations udf_file_operations = {
 	.release		= udf_release_file,
 	.fsync			= udf_fsync_file,
 	.splice_read		= generic_file_splice_read,
+	.llseek			= generic_file_llseek,
 };
 
 const struct inode_operations udf_file_inode_operations = {
-- 
cgit v1.2.3


From cbda1ba898647aeb4ee770b803c922f595e97731 Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Sun, 7 Sep 2008 16:35:26 +0100
Subject: PCI/iommu: blacklist DMAR on Intel G31/G33 chipsets

Some BIOSes (the Intel DG33BU, for example) wrongly claim to have DMAR
when they don't. Avoid the resulting crashes when it doesn't work as
expected.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/intel-iommu.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 8d0e60ac849c..c3edcdc08e72 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -2348,11 +2348,34 @@ static void __init iommu_exit_mempool(void)
 
 }
 
+static int blacklist_iommu(const struct dmi_system_id *id)
+{
+	printk(KERN_INFO "%s detected; disabling IOMMU\n",
+	       id->ident);
+	dmar_disabled = 1;
+	return 0;
+}
+
+static struct dmi_system_id __initdata intel_iommu_dmi_table[] = {
+	{	/* Some DG33BU BIOS revisions advertised non-existent VT-d */
+		.callback = blacklist_iommu,
+		.ident = "Intel DG33BU",
+		{	DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "DG33BU"),
+		}
+	},
+	{ }
+};
+
+
 void __init detect_intel_iommu(void)
 {
 	if (swiotlb || no_iommu || iommu_detected || dmar_disabled)
 		return;
 	if (early_dmar_detect()) {
+		dmi_check_system(intel_iommu_dmi_table);
+		if (dmar_disabled)
+			return;
 		iommu_detected = 1;
 	}
 }
-- 
cgit v1.2.3


From 4ca8a7726fb0e8094fdb56f2ae2d69fcf9254eae Mon Sep 17 00:00:00 2001
From: Johann Felix Soden <johfel@users.sourceforge.net>
Date: Fri, 22 Aug 2008 20:46:59 +0200
Subject: PCI: Fix printk warnings in probe.c

The cleaned up resource code in probe.c introduced some warnings:
drivers/pci/probe.c: In function 'pci_read_bridge_bases':
drivers/pci/probe.c:386: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'resource_size_t'
drivers/pci/probe.c:386: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'resource_size_t'
drivers/pci/probe.c:398: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'resource_size_t'
drivers/pci/probe.c:398: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'resource_size_t'
drivers/pci/probe.c:434: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'resource_size_t'
drivers/pci/probe.c:434: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'resource_size_t'

So fix them up.

Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/probe.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index cce2f4cb1fbf..0ad936765b26 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -383,7 +383,9 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 			res->start = base;
 		if (!res->end)
 			res->end = limit + 0xfff;
-		printk(KERN_INFO "PCI: bridge %s io port: [%llx, %llx]\n", pci_name(dev), res->start, res->end);
+		printk(KERN_INFO "PCI: bridge %s io port: [%llx, %llx]\n",
+			pci_name(dev), (unsigned long long) res->start,
+			(unsigned long long) res->end);
 	}
 
 	res = child->resource[1];
@@ -395,7 +397,8 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
 		res->start = base;
 		res->end = limit + 0xfffff;
-		printk(KERN_INFO "PCI: bridge %s 32bit mmio: [%llx, %llx]\n", pci_name(dev), res->start, res->end);
+		printk(KERN_INFO "PCI: bridge %s 32bit mmio: [%llx, %llx]\n", pci_name(dev),
+			(unsigned long long) res->start, (unsigned long long) res->end);
 	}
 
 	res = child->resource[2];
@@ -431,7 +434,9 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
 		res->start = base;
 		res->end = limit + 0xfffff;
-		printk(KERN_INFO "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n", pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64)?"64":"32",res->start, res->end);
+		printk(KERN_INFO "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n",
+			pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64) ? "64" : "32",
+			(unsigned long long) res->start, (unsigned long long) res->end);
 	}
 }
 
-- 
cgit v1.2.3


From 53bc88701be91e7f631ad31418b32392aa952e9b Mon Sep 17 00:00:00 2001
From: Johann Felix Soden <johfel@users.sourceforge.net>
Date: Fri, 22 Aug 2008 20:25:10 +0200
Subject: PCI: Fix printk warnings in setup-bus.c

Again, the cleaned up code introduced some resource warnings:
drivers/pci/setup-bus.c: In function 'pci_bus_dump_res':
drivers/pci/setup-bus.c:542: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'resource_size_t'
drivers/pci/setup-bus.c:542: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'resource_size_t'

Fix those up too.

Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/setup-bus.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 82634a2f1b1d..c6ea4e97e8b6 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -539,7 +539,11 @@ static void pci_bus_dump_res(struct pci_bus *bus)
                 if (!res)
                         continue;
 
-		printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n", bus->number, i, (res->flags & IORESOURCE_IO)? "io port":"mmio", res->start, res->end);
+		printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n",
+			bus->number, i,
+			(res->flags & IORESOURCE_IO) ? "io port" : "mmio",
+			(unsigned long long) res->start,
+			(unsigned long long) res->end);
         }
 }
 
-- 
cgit v1.2.3


From 48902025af4da44dbbc0231061e542d6d40e712e Mon Sep 17 00:00:00 2001
From: Alex Chiang <achiang@hp.com>
Date: Fri, 5 Sep 2008 14:05:03 -0700
Subject: PCI Hotplug: fakephp: fix deadlock... again

Commit fe99740cac117f208707488c03f3789cf4904957 (construct one
fakephp slot per PCI slot) introduced a regression, causing a
deadlock when removing a PCI device.

We also never actually removed the device from the PCI core.

So we:

	- remove the device from the PCI core
	- do not directly call remove_slot() to prevent deadlock

Yu Zhao reported and diagnosed this defect.

Signed-off-by: Alex Chiang <achiang@hp.com>
Acked-by: Yu Zhao <yu.zhao@intel.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/hotplug/fakephp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c
index 40337a06c18a..146ca9cd1567 100644
--- a/drivers/pci/hotplug/fakephp.c
+++ b/drivers/pci/hotplug/fakephp.c
@@ -320,15 +320,15 @@ static int disable_slot(struct hotplug_slot *slot)
 			return -ENODEV;
 		}
 
+		/* remove the device from the pci core */
+		pci_remove_bus_device(dev);
+
 		/* queue work item to blow away this sysfs entry and other
 		 * parts.
 		 */
 		INIT_WORK(&dslot->remove_work, remove_slot_worker);
 		queue_work(dummyphp_wq, &dslot->remove_work);
 
-		/* blow away this sysfs entry and other parts. */
-		remove_slot(dslot);
-
 		pci_dev_put(dev);
 	}
 	return 0;
-- 
cgit v1.2.3


From e75b986af7881ed8d8ccb1ed154045ed17cfebd0 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue, 9 Sep 2008 21:38:57 +0200
Subject: clockevents: remove WARN_ON which was used to gather information

The issue of the endless reprogramming loop due to a too small
min_delta_ns was fixed with the previous updates of the clock events
code, but we had no information about the spread of this problem. I
added a WARN_ON to get automated information via kerneloops.org and to
get some direct reports, which allowed me to analyse the affected
machines.

The WARN_ON has served its purpose and would be annoying for a release
kernel. Remove it and just keep the information about the increase of
the min_delta_ns value.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 kernel/time/tick-oneshot.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/kernel/time/tick-oneshot.c b/kernel/time/tick-oneshot.c
index 2e35501e61dd..2e8de678e767 100644
--- a/kernel/time/tick-oneshot.c
+++ b/kernel/time/tick-oneshot.c
@@ -43,19 +43,17 @@ int tick_dev_program_event(struct clock_event_device *dev, ktime_t expires,
 		 * and emit a warning.
 		 */
 		if (++i > 2) {
-			printk(KERN_WARNING "CE: __tick_program_event of %s is "
-			       "stuck %llx %llx\n", dev->name ? dev->name : "?",
-			       now.tv64, expires.tv64);
-			printk(KERN_WARNING
-			       "CE: increasing min_delta_ns %ld to %ld nsec\n",
-			       dev->min_delta_ns, dev->min_delta_ns << 1);
-			WARN_ON(1);
-
-			/* Double the min. delta and try again */
+			/* Increase the min. delta and try again */
 			if (!dev->min_delta_ns)
 				dev->min_delta_ns = 5000;
 			else
-				dev->min_delta_ns <<= 1;
+				dev->min_delta_ns += dev->min_delta_ns >> 1;
+
+			printk(KERN_WARNING
+			       "CE: %s increasing min_delta_ns to %lu nsec\n",
+			       dev->name ? dev->name : "?",
+			       dev->min_delta_ns << 1);
+
 			i = 0;
 		}
 
-- 
cgit v1.2.3


From 0e116227a01580acf47437adba3afadf21b6bd5f Mon Sep 17 00:00:00 2001
From: Tao Ma <tao.ma@oracle.com>
Date: Wed, 3 Sep 2008 01:57:14 +0800
Subject: ocfs2: Fix a bug in direct IO read.

ocfs2 will become read-only if we try to read the bytes which pass
the end of i_size. This can be easily reproduced by following steps:
1. mkfs a ocfs2 volume with bs=4k cs=4k and nosparse.
2. create a small file(say less than 100 bytes) and we will create the file
   which is allocated 1 cluster.
3. read 8196 bytes from the kernel using O_DIRECT which exceeds the limit.
4. The ocfs2 volume becomes read-only and dmesg shows:
OCFS2: ERROR (device sda13): ocfs2_direct_IO_get_blocks:
Inode 66010 has a hole at block 1
File system is now read-only due to the potential of on-disk corruption.
Please run fsck.ocfs2 once the file system is unmounted.

So suppress the ERROR message.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
---
 fs/ocfs2/aops.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index 506c24fb5078..a53da1466277 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -594,7 +594,7 @@ static int ocfs2_direct_IO_get_blocks(struct inode *inode, sector_t iblock,
 		goto bail;
 	}
 
-	if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)) && !p_blkno) {
+	if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)) && !p_blkno && create) {
 		ocfs2_error(inode->i_sb,
 			    "Inode %llu has a hole at block %llu\n",
 			    (unsigned long long)OCFS2_I(inode)->ip_blkno,
-- 
cgit v1.2.3


From f461a1d80c865e5ec4d24107adbab8b010b60e32 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Wed, 10 Sep 2008 13:57:43 +0200
Subject: arch/x86/kernel/kdebugfs.c: introduce missing kfree

Error handling code following a kmalloc should free the allocated data.
Note that at the point of the change, node has not yet been stored in d, so
it is not affected by the existing cleanup code.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,l;
position p1,p2;
expression *ptr != NULL;
@@

(
if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S
|
x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
)
<... when != x
     when != if (...) { <+...x...+> }
x->f = E
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/kdebugfs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/kernel/kdebugfs.c b/arch/x86/kernel/kdebugfs.c
index f2d43bc75514..ff7d3b0124f1 100644
--- a/arch/x86/kernel/kdebugfs.c
+++ b/arch/x86/kernel/kdebugfs.c
@@ -139,6 +139,7 @@ static int __init create_setup_data_nodes(struct dentry *parent)
 		if (PageHighMem(pg)) {
 			data = ioremap_cache(pa_data, sizeof(*data));
 			if (!data) {
+				kfree(node);
 				error = -ENXIO;
 				goto err_dir;
 			}
-- 
cgit v1.2.3


From 4611a771fc8e5ad77d27f25268846abb425101a0 Mon Sep 17 00:00:00 2001
From: James Bottomley <James.Bottomley@HansenPartnership.com>
Date: Tue, 9 Sep 2008 17:56:47 -0500
Subject: [IA64] fix compile failure with non modular builds

Broke the non modular builds by moving an essential function into
modules.c.  Fix this by moving it out again and into asm/sections.h as
an inline.  To do this, the definitions of struct fdesc and struct
got_val have been lifted out of modules.c and put in asm/elf.h where
they belong.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/include/asm/elf.h      | 15 +++++++++++++++
 arch/ia64/include/asm/sections.h | 13 ++++++++++++-
 arch/ia64/kernel/module.c        | 21 ---------------------
 3 files changed, 27 insertions(+), 22 deletions(-)

diff --git a/arch/ia64/include/asm/elf.h b/arch/ia64/include/asm/elf.h
index 5e0c1a6bce8d..2acb6b6543c9 100644
--- a/arch/ia64/include/asm/elf.h
+++ b/arch/ia64/include/asm/elf.h
@@ -266,4 +266,19 @@ do {									\
 	}								\
 } while (0)
 
+/*
+ * format for entries in the Global Offset Table
+ */
+struct got_entry {
+	uint64_t val;
+};
+
+/*
+ * Layout of the Function Descriptor
+ */
+struct fdesc {
+	uint64_t ip;
+	uint64_t gp;
+};
+
 #endif /* _ASM_IA64_ELF_H */
diff --git a/arch/ia64/include/asm/sections.h b/arch/ia64/include/asm/sections.h
index a7acad2bc2f0..f66799891036 100644
--- a/arch/ia64/include/asm/sections.h
+++ b/arch/ia64/include/asm/sections.h
@@ -6,6 +6,8 @@
  *	David Mosberger-Tang <davidm@hpl.hp.com>
  */
 
+#include <linux/elf.h>
+#include <linux/uaccess.h>
 #include <asm-generic/sections.h>
 
 extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
@@ -22,7 +24,16 @@ extern char __start_unwind[], __end_unwind[];
 extern char __start_ivt_text[], __end_ivt_text[];
 
 #undef dereference_function_descriptor
-void *dereference_function_descriptor(void *);
+static inline void *dereference_function_descriptor(void *ptr)
+{
+	struct fdesc *desc = ptr;
+	void *p;
+
+	if (!probe_kernel_address(&desc->ip, p))
+		ptr = p;
+	return ptr;
+}
+
 
 #endif /* _ASM_IA64_SECTIONS_H */
 
diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c
index 545626f66a4c..aaa7d901521f 100644
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -31,11 +31,9 @@
 #include <linux/elf.h>
 #include <linux/moduleloader.h>
 #include <linux/string.h>
-#include <linux/uaccess.h>
 #include <linux/vmalloc.h>
 
 #include <asm/patch.h>
-#include <asm/sections.h>
 #include <asm/unaligned.h>
 
 #define ARCH_MODULE_DEBUG 0
@@ -137,15 +135,6 @@ static const char *reloc_name[256] = {
 
 #undef N
 
-struct got_entry {
-	uint64_t val;
-};
-
-struct fdesc {
-	uint64_t ip;
-	uint64_t gp;
-};
-
 /* Opaque struct for insns, to protect against derefs. */
 struct insn;
 
@@ -943,13 +932,3 @@ module_arch_cleanup (struct module *mod)
 	if (mod->arch.core_unw_table)
 		unw_remove_unwind_table(mod->arch.core_unw_table);
 }
-
-void *dereference_function_descriptor(void *ptr)
-{
-	struct fdesc *desc = ptr;
-	void *p;
-
-	if (!probe_kernel_address(&desc->ip, p))
-		ptr = p;
-	return ptr;
-}
-- 
cgit v1.2.3


From 47633cf0d60bde5581d039ac1283ef4377a6e782 Mon Sep 17 00:00:00 2001
From: Robin Holt <holt@sgi.com>
Date: Tue, 9 Sep 2008 10:34:44 -0500
Subject: [IA64] fix up bte.h

bte.h expects a #define of L1_CACHE_MASK which is currently only
in bte.c.  This small patch gets bte.h to include cleanly and makes
BTE_UNALIGNED_COPY not report errors.

Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/include/asm/sn/bte.h | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/ia64/include/asm/sn/bte.h b/arch/ia64/include/asm/sn/bte.h
index a0d214f43115..5efecf06c9a4 100644
--- a/arch/ia64/include/asm/sn/bte.h
+++ b/arch/ia64/include/asm/sn/bte.h
@@ -223,10 +223,11 @@ extern void bte_error_handler(unsigned long);
  * until the transfer is complete.  In order to get the asynch
  * version of bte_copy, you must perform this check yourself.
  */
-#define BTE_UNALIGNED_COPY(src, dest, len, mode)                        \
-	(((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) ||             \
-	  (dest & L1_CACHE_MASK)) ?                                     \
-	 bte_unaligned_copy(src, dest, len, mode) :              	\
+#define BTE_UNALIGNED_COPY(src, dest, len, mode)			\
+	(((len & (L1_CACHE_BYTES - 1)) ||				\
+	  (src & (L1_CACHE_BYTES - 1)) ||				\
+	  (dest & (L1_CACHE_BYTES - 1))) ?				\
+	 bte_unaligned_copy(src, dest, len, mode) :			\
 	 bte_copy(src, dest, len, mode, NULL))
 
 
-- 
cgit v1.2.3


From 6bf6a1a49377c32a02939ec835553703994f3e41 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Wed, 10 Sep 2008 13:57:19 +0200
Subject: [IA64] arch/ia64/sn/pci/tioca_provider.c: introduce missing kfree

Error handling code following a kmalloc should free the allocated data.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/sn/pci/tioca_provider.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c
index 529462c01570..79165122501c 100644
--- a/arch/ia64/sn/pci/tioca_provider.c
+++ b/arch/ia64/sn/pci/tioca_provider.c
@@ -420,8 +420,10 @@ tioca_dma_mapped(struct pci_dev *pdev, u64 paddr, size_t req_size)
 		entry = find_next_zero_bit(map, mapsize, last_entry);
 	}
 
-	if (entry > mapsize)
+	if (entry > mapsize) {
+		kfree(ca_dmamap);
 		goto map_return;
+	}
 
 	for (i = 0; i < entries; i++)
 		set_bit(entry + i, map);
-- 
cgit v1.2.3


From a5827f40afafc864f57a1c44915f0bfaf3d94f53 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Thu, 28 Aug 2008 01:05:26 +0300
Subject: PCI: fix pciehp_free_irq()

This patch fixes an obvious bug (loop was never entered) caused by
commit 820943b6fc4781621dee52ba026106758a727dd3
(pciehp: cleanup pcie_poll_cmd).

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/hotplug/pciehp_hpc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index ab31f5ba665d..9d934ddee956 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -258,7 +258,7 @@ static int pcie_poll_cmd(struct controller *ctrl)
 			return 1;
 		}
 	}
-	while (timeout > 1000) {
+	while (timeout > 0) {
 		msleep(10);
 		timeout -= 10;
 		if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) {
-- 
cgit v1.2.3


From e7b140365b86aaf94374214c6f4e6decbee2eb0a Mon Sep 17 00:00:00 2001
From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Date: Sun, 31 Aug 2008 11:06:30 -0700
Subject: [IA64] prevent ia64 from invoking irq handlers on offline CPUs

Make ia64 refrain from clearing a given to-be-offlined CPU's bit in the
cpu_online_mask until it has processed pending irqs.  This change
prevents other CPUs from being blindsided by an apparently offline CPU
nevertheless changing globally visible state.  Also remove the existing
redundant cpu_clear(cpu, cpu_online_map).

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/smpboot.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index bcea81e432fd..d8f05e504fbf 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -741,16 +741,14 @@ int __cpu_disable(void)
 			return -EBUSY;
 	}
 
-	cpu_clear(cpu, cpu_online_map);
-
 	if (migrate_platform_irqs(cpu)) {
 		cpu_set(cpu, cpu_online_map);
 		return (-EBUSY);
 	}
 
 	remove_siblinginfo(cpu);
-	cpu_clear(cpu, cpu_online_map);
 	fixup_irqs();
+	cpu_clear(cpu, cpu_online_map);
 	local_flush_tlb_all();
 	cpu_clear(cpu, cpu_callin_map);
 	return 0;
-- 
cgit v1.2.3


From 62ff2ecf7a4e69f7271b7f7a57aaee76ffe610f2 Mon Sep 17 00:00:00 2001
From: Masoud Sharbiani <masouds@google.com>
Date: Wed, 10 Sep 2008 22:22:34 +0200
Subject: ide: Fix pointer arithmetic in hpt3xx driver code (3rd try)

git commit 74811f355f4f69a187fa74892dcf2a684b84ce99 causes crash at
module load (or boot) time on my machine with a hpt374 controller.
The reason for this is that for initializing second controller which sets
(hwif->dev == host->dev[1]) to true (1), adds 1 to a void ptr, which
advances it by one byte instead of advancing it by sizeof(hpt_info) bytes.
Because of this, all initialization functions get corrupted data in info
variable which causes a crash at boot time.

This patch fixes that and makes my machine boot again.

The card itself is a HPT374 raid conroller: Here is the lspci -v output:
03:06.0 RAID bus controller: HighPoint Technologies, Inc. HPT374 (rev
07)
        Subsystem: HighPoint Technologies, Inc. Unknown device 0001
        Flags: bus master, 66MHz, medium devsel, latency 120, IRQ 28
        I/O ports at 8000 [size=8]
        I/O ports at 7800 [size=4]
        I/O ports at 7400 [size=8]
        I/O ports at 7000 [size=4]
        I/O ports at 6800 [size=256]
        Expansion ROM at fe8e0000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2

03:06.1 RAID bus controller: HighPoint Technologies, Inc. HPT374 (rev
07)
        Subsystem: HighPoint Technologies, Inc. Unknown device 0001
        Flags: bus master, 66MHz, medium devsel, latency 120, IRQ 28
        I/O ports at 9800 [size=8]
        I/O ports at 9400 [size=4]
        I/O ports at 9000 [size=8]
        I/O ports at 8800 [size=4]
        I/O ports at 8400 [size=256]
        Capabilities: [60] Power Management version 2

Signed-off-by: Masoud Sharbiani <masouds@google.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
[bart: use dev_get_drvdata() per Sergei's suggestion]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/hpt366.c | 31 +++++++++++++++----------------
 1 file changed, 15 insertions(+), 16 deletions(-)

diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index eb107eef0dbc..c37ab1743819 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -613,6 +613,14 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list)
 	return 0;
 }
 
+static struct hpt_info *hpt3xx_get_info(struct device *dev)
+{
+	struct ide_host *host	= dev_get_drvdata(dev);
+	struct hpt_info *info	= (struct hpt_info *)host->host_priv;
+
+	return dev == host->dev[1] ? info + 1 : info;
+}
+
 /*
  * The Marvell bridge chips used on the HighPoint SATA cards do not seem
  * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes...
@@ -621,9 +629,7 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list)
 static u8 hpt3xx_udma_filter(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
+	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 	u8 mask 		= hwif->ultra_mask;
 
 	switch (info->chip_type) {
@@ -662,9 +668,7 @@ static u8 hpt3xx_udma_filter(ide_drive_t *drive)
 static u8 hpt3xx_mdma_filter(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
+	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 
 	switch (info->chip_type) {
 	case HPT372 :
@@ -700,8 +704,7 @@ static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
 {
 	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
+	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 	struct hpt_timings *t	= info->timings;
 	u8  itr_addr		= 0x40 + (drive->dn * 4);
 	u32 old_itr		= 0;
@@ -744,8 +747,7 @@ static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct pci_dev	*dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
+	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 
 	if (drive->quirk_list) {
 		if (info->chip_type >= HPT370) {
@@ -973,8 +975,7 @@ static int __devinit hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f
 static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
 {
 	unsigned long io_base	= pci_resource_start(dev, 4);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct hpt_info *info	= host->host_priv + (&dev->dev == host->dev[1]);
+	struct hpt_info *info	= hpt3xx_get_info(&dev->dev);
 	const char *name	= DRV_NAME;
 	u8 pci_clk,  dpll_clk	= 0;	/* PCI and DPLL clock in MHz */
 	u8 chip_type;
@@ -1217,8 +1218,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
 static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev	*dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
+	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 	u8 chip_type		= info->chip_type;
 	u8 scr1 = 0, ata66	= hwif->channel ? 0x01 : 0x02;
 
@@ -1262,8 +1262,7 @@ static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
 static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	struct ide_host *host	= pci_get_drvdata(dev);
-	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
+	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 	int serialize		= HPT_SERIALIZE_IO;
 	u8  chip_type		= info->chip_type;
 	u8  new_mcr, old_mcr	= 0;
-- 
cgit v1.2.3


From 46dfa040f6c26f416a0979a7cd5a2d81f08121d5 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Wed, 10 Sep 2008 22:22:34 +0200
Subject: add deprecated ide-scsi to feature-removal-schedule.txt

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 Documentation/feature-removal-schedule.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index eb1a47b97427..83c88cae1eda 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -322,3 +322,11 @@ Why:  Accounting can now be enabled/disabled without kernel recompilation.
       controlled by a kernel/module/sysfs/sysctl parameter.
 Who:  Krzysztof Piotr Oledzki <ole@ans.pl>
 
+---------------------------
+
+What: ide-scsi (BLK_DEV_IDESCSI)
+When: 2.6.29
+Why:  The 2.6 kernel supports direct writing to ide CD drives, which
+      eliminates the need for ide-scsi. The new method is more
+      efficient in every way.
+Who:  FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
-- 
cgit v1.2.3


From 36223a399f639b13b7a454349565934e6d3e2db0 Mon Sep 17 00:00:00 2001
From: Daniel J Blueman <daniel.blueman@gmail.com>
Date: Wed, 10 Sep 2008 21:07:55 +0100
Subject: swiotlb: fix back-off path when memory allocation fails

This fixes a SWIOTLB oops

With SWIOTLB being enabled and straight-forward page allocation
failure [1], the swiotlb_alloc_coherent fall-back path hits an
issue [2], resulting in my webcam failing to work.

At the time of oops, RDI is clearly a pointer to a structure which
has arrived as NULL, leading to the typo in swiotlb_map_single's
callsite arguments.

Correctly passing the device structure [3] addresses the issue and
gets my webcam working again (the allocation failure still occuring).

 --- [1]

skype: page allocation failure. order:3, mode:0x1
Pid: 5895, comm: skype Not tainted 2.6.27-rc6-235c-debug #1

Call Trace:
 [<ffffffff802b7cf0>] __alloc_pages_internal+0x4a0/0x5d0
 [<ffffffff802d5ddd>] alloc_pages_current+0xad/0x110
 [<ffffffff802b4ccd>] __get_free_pages+0x1d/0x60
 [<ffffffff8046cd39>] swiotlb_alloc_coherent+0x49/0x180
 [<ffffffff80212731>] dma_alloc_coherent+0x281/0x310
 [<ffffffff805621c0>] hcd_buffer_alloc+0x50/0x90
 [<ffffffff805547fd>] usb_buffer_alloc+0x2d/0x40
 [<ffffffffa0056763>] uvc_alloc_urb_buffers+0x53/0xf0 [uvcvideo]
 [<ffffffffa0056958>] uvc_init_video+0x158/0x3e0 [uvcvideo]
 [<ffffffffa0056c17>] uvc_video_enable+0x37/0x80 [uvcvideo]
 [<ffffffffa0055853>] uvc_v4l2_do_ioctl+0x723/0x1260 [uvcvideo]
 [<ffffffff8026dd61>] ? trace_hardirqs_off_caller+0x21/0xc0
 [<ffffffff8026dd61>] ? trace_hardirqs_off_caller+0x21/0xc0
 [<ffffffffa0032c9f>] video_usercopy+0x19f/0x390 [videodev]
 [<ffffffffa0055130>] ? uvc_v4l2_do_ioctl+0x0/0x1260 [uvcvideo]
 [<ffffffff8026d0ce>] ? put_lock_stats+0xe/0x30
 [<ffffffffa0054dad>] uvc_v4l2_ioctl+0x4d/0x80 [uvcvideo]
 [<ffffffffa0045083>] native_ioctl+0x83/0x90 [compat_ioctl32]
 [<ffffffffa004534e>] v4l_compat_ioctl32+0x2be/0x1da4 [compat_ioctl32]
 [<ffffffff806aad21>] ? do_page_fault+0x3d1/0xae0
 [<ffffffff80270ccd>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff80270c59>] ? trace_hardirqs_on_caller+0x149/0x1b0
 [<ffffffff80270ccd>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff80329afa>] compat_sys_ioctl+0x8a/0x3c0
 [<ffffffff806a700d>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff8022f816>] sysenter_dispatch+0x7/0x2c
 [<ffffffff806a6fce>] ? trace_hardirqs_on_thunk+0x3a/0x3f

Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:   3
CPU    1: hi:  186, btch:  31 usd:   0
Node 0 Normal per-cpu:
CPU    0: hi:  186, btch:  31 usd:  23
CPU    1: hi:  186, btch:  31 usd: 179
Active:78545 inactive:48683 dirty:31 writeback:0 unstable:2
 free:830202 slab:17516 mapped:17473 pagetables:3496 bounce:0
Node 0 DMA free:36kB min:28kB low:32kB high:40kB active:0kB
inactive:0kB present:15156kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 3207 3956 3956
Node 0 DMA32 free:3197192kB min:6512kB low:8140kB high:9768kB
active:0kB inactive:0kB present:3284896kB pages_scanned:0
all_unreclaimable? no
lowmem_reserve[]: 0 0 748 748
Node 0 Normal free:123580kB min:1516kB low:1892kB high:2272kB
active:314180kB inactive:194732kB present:766464kB pages_scanned:0
all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 1*4kB 0*8kB 0*16kB 1*32kB 0*64kB 0*128kB 0*256kB 0*512kB
0*1024kB 0*2048kB 0*4096kB = 36kB
Node 0 DMA32: 4*4kB 3*8kB 2*16kB 3*32kB 4*64kB 5*128kB 3*256kB 5*512kB
4*1024kB 5*2048kB 776*4096kB = 3197224kB
Node 0 Normal: 14*4kB 14*8kB 8*16kB 6*32kB 1*64kB 3*128kB 3*256kB
2*512kB 4*1024kB 1*2048kB 28*4096kB = 123560kB
64847 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap  = 502752kB
Total swap = 502752kB
1048576 pages RAM
52120 pages reserved
71967 pages shared
143004 pages non-shared

 --- [2]

BUG: unable to handle kernel NULL pointer dereference at 00000000000002c8
IP: [<ffffffff8046c84c>] map_single+0x1c/0x280
PGD 10e54e067 PUD 10e595067 PMD 0
Oops: 0000 [1] PREEMPT SMP DEBUG_PAGEALLOC
CPU 0
Modules linked in: kvm_intel kvm microcode uvcvideo compat_ioctl32
videodev v4l1_compat shpchp pci_hotplug
Pid: 5895, comm: skype Not tainted 2.6.27-rc6-235c-debug #1
RIP: 0010:[<ffffffff8046c84c>]  [<ffffffff8046c84c>] map_single+0x1c/0x280
RSP: 0018:ffff88010e78d988  EFLAGS: 00210296
RAX: 0000780000000000 RBX: 0000000000000000 RCX: 0000000000000002
RDX: 0000000000005000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88010e78d9e8 R08: 0000000000000000 R09: 0000000000000001
R10: ffff88010e78d698 R11: 0000000000000001 R12: 0000000000000002
R13: 0000000000000000 R14: 0000000000005000 R15: ffff88012f1c9968
FS:  0000000000000000(0000) GS:ffffffff80a6cdc0(0063) knlGS:00000000f6355b90
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 00000000000002c8 CR3: 000000010e57d000 CR4: 00000000000026e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process skype (pid: 5895, threadinfo ffff88010e78c000, task ffff88012b9cc460)
Stack:  0000000200000000 0000000000005000 0000000000000000 0000000000000000
 00000000000017b8 0000000000000000 ffff88010e78d9c8 0000000000000000
 0000000000000002 0000000000000000 0000000000005000 ffff88012f1c9968
Call Trace:
 [<ffffffff8046cbb0>] swiotlb_map_single_attrs+0x60/0xf0
 [<ffffffff8046cc4c>] swiotlb_map_single+0xc/0x10
 [<ffffffff8046cdee>] swiotlb_alloc_coherent+0xfe/0x180
 [<ffffffff80212731>] dma_alloc_coherent+0x281/0x310
 [<ffffffff805621c0>] hcd_buffer_alloc+0x50/0x90
 [<ffffffff805547fd>] usb_buffer_alloc+0x2d/0x40
 [<ffffffffa0056763>] uvc_alloc_urb_buffers+0x53/0xf0 [uvcvideo]
 [<ffffffffa0056958>] uvc_init_video+0x158/0x3e0 [uvcvideo]
 [<ffffffffa0056c17>] uvc_video_enable+0x37/0x80 [uvcvideo]
 [<ffffffffa0055853>] uvc_v4l2_do_ioctl+0x723/0x1260 [uvcvideo]
 [<ffffffff8026dd61>] ? trace_hardirqs_off_caller+0x21/0xc0
 [<ffffffff8026dd61>] ? trace_hardirqs_off_caller+0x21/0xc0
 [<ffffffffa0032c9f>] video_usercopy+0x19f/0x390 [videodev]
 [<ffffffffa0055130>] ? uvc_v4l2_do_ioctl+0x0/0x1260 [uvcvideo]
 [<ffffffff8026d0ce>] ? put_lock_stats+0xe/0x30
 [<ffffffffa0054dad>] uvc_v4l2_ioctl+0x4d/0x80 [uvcvideo]
 [<ffffffffa0045083>] native_ioctl+0x83/0x90 [compat_ioctl32]
 [<ffffffffa004534e>] v4l_compat_ioctl32+0x2be/0x1da4 [compat_ioctl32]
 [<ffffffff806aad21>] ? do_page_fault+0x3d1/0xae0
 [<ffffffff80270ccd>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff80270c59>] ? trace_hardirqs_on_caller+0x149/0x1b0
 [<ffffffff80270ccd>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff80329afa>] compat_sys_ioctl+0x8a/0x3c0
 [<ffffffff806a700d>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff8022f816>] sysenter_dispatch+0x7/0x2c
 [<ffffffff806a6fce>] ? trace_hardirqs_on_thunk+0x3a/0x3f

Code: 45 31 c0 48 89 e5 e8 a4 ff ff ff c9 c3 66 90 55 48 89 e5 41 57
41 56 41 55 41 54 53 48 83 ec 38 48 89 75 b0 48 89 55 a8 89 4d a4 <48>
8b 87 c8 02 00 00 48 85 c0 0f 84 1c 02 00 00 48 8b 58 08 48
RIP  [<ffffffff8046c84c>] map_single+0x1c/0x280
 RSP <ffff88010e78d988>
CR2: 00000000000002c8
---[ end trace 5d15baeeb7025a0e ]---

 --- [3]

ffffffff8046c830 <map_single>:
map_single():
/store/kernel/linux/lib/swiotlb.c:291
ffffffff8046c830:       55                      push   %rbp
ffffffff8046c831:       48 89 e5                mov    %rsp,%rbp
ffffffff8046c834:       41 57                   push   %r15
ffffffff8046c836:       41 56                   push   %r14
ffffffff8046c838:       41 55                   push   %r13
ffffffff8046c83a:       41 54                   push   %r12
ffffffff8046c83c:       53                      push   %rbx
ffffffff8046c83d:       48 83 ec 38             sub    $0x38,%rsp
ffffffff8046c841:       48 89 75 b0             mov    %rsi,-0x50(%rbp)
ffffffff8046c845:       48 89 55 a8             mov    %rdx,-0x58(%rbp)
ffffffff8046c849:       89 4d a4                mov    %ecx,-0x5c(%rbp)
dma_get_seg_boundary():
/store/kernel/linux/include/linux/dma-mapping.h:80
ffffffff8046c84c:       48 8b 87 c8 02 00 00    mov    0x2c8(%rdi),%rax <----

 --- [4]

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 lib/swiotlb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index 977edbdbc1de..8826fdf0f180 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -491,7 +491,7 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 		 * the lowest available address range.
 		 */
 		dma_addr_t handle;
-		handle = swiotlb_map_single(NULL, NULL, size, DMA_FROM_DEVICE);
+		handle = swiotlb_map_single(hwdev, NULL, size, DMA_FROM_DEVICE);
 		if (swiotlb_dma_mapping_error(hwdev, handle))
 			return NULL;
 
-- 
cgit v1.2.3


From ebfb2c63405f2410897674f14e41c031c9302909 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 10 Sep 2008 14:08:27 -0700
Subject: sparc64: Fix interrupt register calculations on Psycho and Sabre.

Use the IMAP offset calculation for OBIO devices as documented in the
programmer's manual.  Which is "0x10000 + ((ino & 0x1f) << 3)"

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc64/kernel/prom.c | 104 +++------------------------------------------
 1 file changed, 6 insertions(+), 98 deletions(-)

diff --git a/arch/sparc64/kernel/prom.c b/arch/sparc64/kernel/prom.c
index 3c048ac4e638..7151513f156e 100644
--- a/arch/sparc64/kernel/prom.c
+++ b/arch/sparc64/kernel/prom.c
@@ -156,55 +156,11 @@ static unsigned long psycho_pcislot_imap_offset(unsigned long ino)
 		return PSYCHO_IMAP_B_SLOT0 + (slot * 8);
 }
 
-#define PSYCHO_IMAP_SCSI	0x1000UL
-#define PSYCHO_IMAP_ETH		0x1008UL
-#define PSYCHO_IMAP_BPP		0x1010UL
-#define PSYCHO_IMAP_AU_REC	0x1018UL
-#define PSYCHO_IMAP_AU_PLAY	0x1020UL
-#define PSYCHO_IMAP_PFAIL	0x1028UL
-#define PSYCHO_IMAP_KMS		0x1030UL
-#define PSYCHO_IMAP_FLPY	0x1038UL
-#define PSYCHO_IMAP_SHW		0x1040UL
-#define PSYCHO_IMAP_KBD		0x1048UL
-#define PSYCHO_IMAP_MS		0x1050UL
-#define PSYCHO_IMAP_SER		0x1058UL
-#define PSYCHO_IMAP_TIM0	0x1060UL
-#define PSYCHO_IMAP_TIM1	0x1068UL
-#define PSYCHO_IMAP_UE		0x1070UL
-#define PSYCHO_IMAP_CE		0x1078UL
-#define PSYCHO_IMAP_A_ERR	0x1080UL
-#define PSYCHO_IMAP_B_ERR	0x1088UL
-#define PSYCHO_IMAP_PMGMT	0x1090UL
-#define PSYCHO_IMAP_GFX		0x1098UL
-#define PSYCHO_IMAP_EUPA	0x10a0UL
-
-static unsigned long __psycho_onboard_imap_off[] = {
-/*0x20*/	PSYCHO_IMAP_SCSI,
-/*0x21*/	PSYCHO_IMAP_ETH,
-/*0x22*/	PSYCHO_IMAP_BPP,
-/*0x23*/	PSYCHO_IMAP_AU_REC,
-/*0x24*/	PSYCHO_IMAP_AU_PLAY,
-/*0x25*/	PSYCHO_IMAP_PFAIL,
-/*0x26*/	PSYCHO_IMAP_KMS,
-/*0x27*/	PSYCHO_IMAP_FLPY,
-/*0x28*/	PSYCHO_IMAP_SHW,
-/*0x29*/	PSYCHO_IMAP_KBD,
-/*0x2a*/	PSYCHO_IMAP_MS,
-/*0x2b*/	PSYCHO_IMAP_SER,
-/*0x2c*/	PSYCHO_IMAP_TIM0,
-/*0x2d*/	PSYCHO_IMAP_TIM1,
-/*0x2e*/	PSYCHO_IMAP_UE,
-/*0x2f*/	PSYCHO_IMAP_CE,
-/*0x30*/	PSYCHO_IMAP_A_ERR,
-/*0x31*/	PSYCHO_IMAP_B_ERR,
-/*0x32*/	PSYCHO_IMAP_PMGMT,
-/*0x33*/	PSYCHO_IMAP_GFX,
-/*0x34*/	PSYCHO_IMAP_EUPA,
-};
+#define PSYCHO_OBIO_IMAP_BASE	0x1000UL
+
 #define PSYCHO_ONBOARD_IRQ_BASE		0x20
-#define PSYCHO_ONBOARD_IRQ_LAST		0x34
 #define psycho_onboard_imap_offset(__ino) \
-	__psycho_onboard_imap_off[(__ino) - PSYCHO_ONBOARD_IRQ_BASE]
+	(PSYCHO_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
 
 #define PSYCHO_ICLR_A_SLOT0	0x1400UL
 #define PSYCHO_ICLR_SCSI	0x1800UL
@@ -228,10 +184,6 @@ static unsigned int psycho_irq_build(struct device_node *dp,
 		imap_off = psycho_pcislot_imap_offset(ino);
 	} else {
 		/* Onboard device */
-		if (ino > PSYCHO_ONBOARD_IRQ_LAST) {
-			prom_printf("psycho_irq_build: Wacky INO [%x]\n", ino);
-			prom_halt();
-		}
 		imap_off = psycho_onboard_imap_offset(ino);
 	}
 
@@ -318,23 +270,6 @@ static void sabre_wsync_handler(unsigned int ino, void *_arg1, void *_arg2)
 
 #define SABRE_IMAP_A_SLOT0	0x0c00UL
 #define SABRE_IMAP_B_SLOT0	0x0c20UL
-#define SABRE_IMAP_SCSI		0x1000UL
-#define SABRE_IMAP_ETH		0x1008UL
-#define SABRE_IMAP_BPP		0x1010UL
-#define SABRE_IMAP_AU_REC	0x1018UL
-#define SABRE_IMAP_AU_PLAY	0x1020UL
-#define SABRE_IMAP_PFAIL	0x1028UL
-#define SABRE_IMAP_KMS		0x1030UL
-#define SABRE_IMAP_FLPY		0x1038UL
-#define SABRE_IMAP_SHW		0x1040UL
-#define SABRE_IMAP_KBD		0x1048UL
-#define SABRE_IMAP_MS		0x1050UL
-#define SABRE_IMAP_SER		0x1058UL
-#define SABRE_IMAP_UE		0x1070UL
-#define SABRE_IMAP_CE		0x1078UL
-#define SABRE_IMAP_PCIERR	0x1080UL
-#define SABRE_IMAP_GFX		0x1098UL
-#define SABRE_IMAP_EUPA		0x10a0UL
 #define SABRE_ICLR_A_SLOT0	0x1400UL
 #define SABRE_ICLR_B_SLOT0	0x1480UL
 #define SABRE_ICLR_SCSI		0x1800UL
@@ -364,33 +299,10 @@ static unsigned long sabre_pcislot_imap_offset(unsigned long ino)
 		return SABRE_IMAP_B_SLOT0 + (slot * 8);
 }
 
-static unsigned long __sabre_onboard_imap_off[] = {
-/*0x20*/	SABRE_IMAP_SCSI,
-/*0x21*/	SABRE_IMAP_ETH,
-/*0x22*/	SABRE_IMAP_BPP,
-/*0x23*/	SABRE_IMAP_AU_REC,
-/*0x24*/	SABRE_IMAP_AU_PLAY,
-/*0x25*/	SABRE_IMAP_PFAIL,
-/*0x26*/	SABRE_IMAP_KMS,
-/*0x27*/	SABRE_IMAP_FLPY,
-/*0x28*/	SABRE_IMAP_SHW,
-/*0x29*/	SABRE_IMAP_KBD,
-/*0x2a*/	SABRE_IMAP_MS,
-/*0x2b*/	SABRE_IMAP_SER,
-/*0x2c*/	0 /* reserved */,
-/*0x2d*/	0 /* reserved */,
-/*0x2e*/	SABRE_IMAP_UE,
-/*0x2f*/	SABRE_IMAP_CE,
-/*0x30*/	SABRE_IMAP_PCIERR,
-/*0x31*/	0 /* reserved */,
-/*0x32*/	0 /* reserved */,
-/*0x33*/	SABRE_IMAP_GFX,
-/*0x34*/	SABRE_IMAP_EUPA,
-};
-#define SABRE_ONBOARD_IRQ_BASE		0x20
-#define SABRE_ONBOARD_IRQ_LAST		0x30
+#define SABRE_OBIO_IMAP_BASE	0x1000UL
+#define SABRE_ONBOARD_IRQ_BASE	0x20
 #define sabre_onboard_imap_offset(__ino) \
-	__sabre_onboard_imap_off[(__ino) - SABRE_ONBOARD_IRQ_BASE]
+	(SABRE_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
 
 #define sabre_iclr_offset(ino)					      \
 	((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) :  \
@@ -453,10 +365,6 @@ static unsigned int sabre_irq_build(struct device_node *dp,
 		imap_off = sabre_pcislot_imap_offset(ino);
 	} else {
 		/* onboard device */
-		if (ino > SABRE_ONBOARD_IRQ_LAST) {
-			prom_printf("sabre_irq_build: Wacky INO [%x]\n", ino);
-			prom_halt();
-		}
 		imap_off = sabre_onboard_imap_offset(ino);
 	}
 
-- 
cgit v1.2.3


From 5368f69c8b155d6e82dfc622d817c882689e9cd9 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Wed, 10 Sep 2008 22:15:18 +0200
Subject: VIDEO_SH_MOBILE_CEU should depend on HAS_DMA

commit 0d3244d6439c8c31d2a29efd587c7aca9042c8aa ("V4L/DVB (8342):
sh_mobile_ceu_camera: Add SuperH Mobile CEU driver V3") introduced
VIDEO_SH_MOBILE_CEU, which selects VIDEOBUF_DMA_CONTIG. This circumvents the
dependency on HAS_DMA of VIDEOBUF_DMA_CONTIG.

Add a dependency on HAS_DMA to VIDEO_SH_MOBILE_CEU to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/media/video/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index ecbfa1b39b70..3e9e0dcd217e 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -968,7 +968,7 @@ config VIDEO_PXA27x
 
 config VIDEO_SH_MOBILE_CEU
 	tristate "SuperH Mobile CEU Interface driver"
-	depends on VIDEO_DEV
+	depends on VIDEO_DEV && HAS_DMA
 	select SOC_CAMERA
 	select VIDEOBUF_DMA_CONTIG
 	---help---
-- 
cgit v1.2.3


From 9e7222c83560186686319f2892f43fc557baed2d Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Wed, 10 Sep 2008 22:15:19 +0200
Subject: m68k: Update defconfigs for 2.6.27-rc6

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/m68k/configs/amiga_defconfig    | 53 ++++++++++++++++++------------
 arch/m68k/configs/apollo_defconfig   | 53 ++++++++++++++++++------------
 arch/m68k/configs/atari_defconfig    | 60 +++++++++++++++++++---------------
 arch/m68k/configs/bvme6000_defconfig | 52 ++++++++++++++++++------------
 arch/m68k/configs/hp300_defconfig    | 52 ++++++++++++++++++------------
 arch/m68k/configs/mac_defconfig      | 53 ++++++++++++++++++------------
 arch/m68k/configs/multi_defconfig    | 62 +++++++++++++++++++++---------------
 arch/m68k/configs/mvme147_defconfig  | 52 ++++++++++++++++++------------
 arch/m68k/configs/mvme16x_defconfig  | 52 ++++++++++++++++++------------
 arch/m68k/configs/q40_defconfig      | 53 ++++++++++++++++++------------
 arch/m68k/configs/sun3_defconfig     | 54 ++++++++++++++++++-------------
 arch/m68k/configs/sun3x_defconfig    | 52 ++++++++++++++++++------------
 12 files changed, 390 insertions(+), 258 deletions(-)

diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index 8e2a0f5faf53..8bd61a640fc9 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:00 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -166,10 +172,6 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_ZORRO_NAMES=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -183,6 +185,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -460,6 +466,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -470,6 +477,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -489,8 +497,6 @@ CONFIG_BLK_DEV_GAYLE=y
 CONFIG_BLK_DEV_IDEDOUBLER=y
 CONFIG_BLK_DEV_BUDDHA=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -556,6 +562,7 @@ CONFIG_A2091_SCSI=y
 CONFIG_GVP11_SCSI=y
 CONFIG_SCSI_A4000T=y
 CONFIG_SCSI_ZORRO7XX=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -564,7 +571,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -573,13 +580,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -722,6 +725,7 @@ CONFIG_INPUT_M68K_BEEP=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -757,6 +761,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -768,8 +773,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -844,10 +851,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
 CONFIG_DMASOUND_PAULA=m
 CONFIG_DMASOUND=m
@@ -861,6 +864,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -899,6 +903,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -958,6 +963,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -980,7 +986,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -989,7 +994,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -1054,6 +1058,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1113,6 +1119,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1154,6 +1164,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index e2d511e2a1d1..c41b854c0284 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:01 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -161,10 +167,6 @@ CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -178,6 +180,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -411,6 +414,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -430,7 +434,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -448,6 +454,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -499,6 +506,7 @@ CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -507,7 +515,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -516,13 +524,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -532,7 +536,6 @@ CONFIG_VETH=m
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
-CONFIG_APOLLO_ELPLUS=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -627,6 +630,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -657,6 +661,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -668,8 +673,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -738,10 +745,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -753,6 +756,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -789,6 +793,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -848,6 +853,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -860,18 +866,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -880,7 +885,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -944,6 +948,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1003,6 +1009,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1044,6 +1054,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 6e20d656adaf..654c5acb9e86 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:02 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -162,10 +168,6 @@ CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -179,6 +181,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -409,6 +412,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -428,7 +432,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -452,6 +458,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -462,6 +469,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -479,8 +487,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_FALCON_IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -530,6 +536,7 @@ CONFIG_ISCSI_TCP=m
 CONFIG_ATARI_SCSI=y
 # CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
 # CONFIG_ATARI_SCSI_RESET_BOOT is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -538,7 +545,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -547,13 +554,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -666,6 +669,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -700,6 +704,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -711,8 +716,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -782,10 +789,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
 CONFIG_DMASOUND_ATARI=m
 CONFIG_DMASOUND=m
@@ -799,6 +802,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -806,11 +810,8 @@ CONFIG_HIDRAW=y
 # Character devices
 #
 CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_SCC=y
-CONFIG_ATARI_SCC_DMA=y
 CONFIG_ATARI_MIDI=m
 CONFIG_ATARI_DSP56K=m
-# CONFIG_SERIAL_CONSOLE is not set
 
 #
 # File systems
@@ -820,8 +821,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+# CONFIG_EXT4DEV_FS_XATTR is not set
 CONFIG_JBD=y
+CONFIG_JBD2=y
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -840,6 +843,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -899,6 +903,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -920,7 +925,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-CONFIG_SUNRPC_BIND34=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -929,7 +933,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -994,6 +997,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1053,6 +1058,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1094,6 +1103,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index a0a9b30bb502..2e44af0fe54a 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:03 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -503,6 +510,7 @@ CONFIG_ISCSI_TCP=m
 CONFIG_53C700_BE_BUS=y
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_BVME6000_SCSI=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -511,7 +519,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -520,13 +528,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -631,6 +635,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -661,6 +666,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -672,8 +678,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -708,10 +716,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -723,6 +727,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -759,6 +764,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -818,6 +824,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -830,18 +837,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -850,7 +856,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -915,6 +920,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -974,6 +981,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1015,6 +1026,7 @@ CONFIG_BITREVERSE=m
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=m
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 6778041de262..3570fc89b089 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:04 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -162,10 +168,6 @@ CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -179,6 +181,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -412,6 +415,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -431,7 +435,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -449,6 +455,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -500,6 +507,7 @@ CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -508,7 +516,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -517,13 +525,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -636,6 +640,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -666,6 +671,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -677,8 +683,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -747,10 +755,6 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -762,6 +766,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -796,6 +801,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -855,6 +861,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -867,18 +874,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -887,7 +893,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -951,6 +956,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1010,6 +1017,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1051,6 +1062,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index 7cd375740348..db6e8822594a 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:06 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -460,6 +467,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -477,8 +485,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_MAC_IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -527,6 +533,7 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MAC_SCSI=y
 CONFIG_SCSI_MAC_ESP=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -535,7 +542,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -544,9 +551,6 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_MACINTOSH_DRIVERS=y
@@ -559,7 +563,6 @@ CONFIG_ADB_CUDA=y
 CONFIG_INPUT_ADBHID=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -670,6 +673,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -700,6 +704,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -711,8 +716,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -784,10 +791,6 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_MAC_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -799,6 +802,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -836,6 +840,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -895,6 +900,7 @@ CONFIG_HFSPLUS_FS=y
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -917,7 +923,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -926,7 +931,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -991,6 +995,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1050,6 +1056,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1091,6 +1101,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index 0747fa3984df..1a806102b999 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:07 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -173,10 +179,6 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_ZORRO_NAMES=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -190,6 +192,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -427,6 +430,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -446,7 +450,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -476,6 +482,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -486,6 +493,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -508,8 +516,6 @@ CONFIG_BLK_DEV_FALCON_IDE=y
 CONFIG_BLK_DEV_MAC_IDE=y
 CONFIG_BLK_DEV_Q40IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -584,6 +590,7 @@ CONFIG_MVME147_SCSI=y
 CONFIG_MVME16x_SCSI=y
 CONFIG_BVME6000_SCSI=y
 CONFIG_SUN3X_ESP=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -592,7 +599,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -601,9 +608,6 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_MACINTOSH_DRIVERS=y
@@ -616,7 +620,6 @@ CONFIG_ADB_CUDA=y
 CONFIG_INPUT_ADBHID=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -632,7 +635,6 @@ CONFIG_A2065=m
 CONFIG_HYDRA=m
 CONFIG_ZORRO8390=m
 CONFIG_APNE=m
-CONFIG_APOLLO_ELPLUS=y
 CONFIG_MAC8390=y
 CONFIG_MAC89x0=m
 CONFIG_MACSONIC=m
@@ -791,6 +793,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -827,6 +830,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -838,8 +842,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -923,10 +929,6 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_MAC_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
 CONFIG_DMASOUND_ATARI=m
 CONFIG_DMASOUND_PAULA=m
@@ -942,6 +944,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -949,8 +952,6 @@ CONFIG_HIDRAW=y
 # Character devices
 #
 CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_SCC=y
-CONFIG_ATARI_SCC_DMA=y
 CONFIG_ATARI_MIDI=m
 CONFIG_ATARI_DSP56K=m
 CONFIG_AMIGA_BUILTIN_SERIAL=y
@@ -972,8 +973,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+# CONFIG_EXT4DEV_FS_XATTR is not set
 CONFIG_JBD=y
+CONFIG_JBD2=y
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -992,6 +995,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -1051,6 +1055,7 @@ CONFIG_HFSPLUS_FS=y
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1063,18 +1068,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1083,7 +1087,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -1152,6 +1155,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1211,6 +1216,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1252,6 +1261,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index e7a8246840b5..cacb5aef6a37 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:08 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -502,6 +509,7 @@ CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MVME147_SCSI=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -510,7 +518,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -519,13 +527,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -630,6 +634,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -660,6 +665,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -671,8 +677,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -707,10 +715,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -722,6 +726,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -758,6 +763,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -817,6 +823,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -829,18 +836,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -849,7 +855,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -914,6 +919,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -973,6 +980,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1014,6 +1025,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index ab536eb172bb..a183e25e348d 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:09 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -503,6 +510,7 @@ CONFIG_ISCSI_TCP=m
 CONFIG_53C700_BE_BUS=y
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MVME16x_SCSI=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -511,7 +519,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -520,13 +528,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -631,6 +635,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -661,6 +666,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -672,8 +678,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -708,10 +716,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -723,6 +727,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -760,6 +765,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -819,6 +825,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -831,18 +838,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -851,7 +857,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -916,6 +921,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -975,6 +982,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1016,6 +1027,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index e05be687b500..72eaff0776b8 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:10 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -163,10 +169,6 @@ CONFIG_ISA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -410,6 +413,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -429,7 +433,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -448,6 +454,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -458,6 +465,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -475,8 +483,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_Q40IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -536,6 +542,7 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -544,7 +551,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -553,13 +560,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -680,6 +683,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -711,6 +715,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -722,8 +727,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -792,10 +799,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
 CONFIG_DMASOUND_Q40=m
 CONFIG_DMASOUND=m
@@ -809,6 +812,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -843,6 +847,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -902,6 +907,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -924,7 +930,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -933,7 +938,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -997,6 +1001,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1056,6 +1062,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1097,6 +1107,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index 296340d2b315..cb62b96d766e 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:11 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,10 +155,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -166,6 +168,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -399,6 +402,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -418,7 +422,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -436,6 +442,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -488,6 +495,7 @@ CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_SUN3_SCSI=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -496,7 +504,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -505,13 +513,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -527,7 +531,6 @@ CONFIG_SUN3_82586=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -617,6 +620,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -647,19 +651,20 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -727,10 +732,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -776,6 +777,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -835,6 +837,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -847,18 +850,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -867,7 +869,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -932,6 +933,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -991,6 +994,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1032,6 +1039,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 8d3a416c92bf..04b4363a7050 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:12 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -160,10 +166,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -177,6 +179,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -410,6 +413,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -429,7 +433,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -447,6 +453,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -499,6 +506,7 @@ CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_SUN3X_ESP=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -507,7 +515,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -516,13 +524,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -627,6 +631,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -657,6 +662,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -668,8 +674,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -737,10 +745,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -752,6 +756,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -786,6 +791,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -845,6 +851,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -857,18 +864,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -877,7 +883,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -942,6 +947,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1001,6 +1008,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1042,6 +1053,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
-- 
cgit v1.2.3


From 2389b36072892fed57a701e01a7dbe655420e5e5 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Date: Wed, 6 Aug 2008 20:13:46 -0300
Subject: V4L/DVB (8559a): Fix a merge conflict at gspca/sonixb

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/gspca/sonixb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 5dd78c6766ea..12b81ae526b7 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -232,7 +232,7 @@ static struct ctrl sd_ctrls[] = {
 static struct v4l2_pix_format vga_mode[] = {
 	{160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
 		.bytesperline = 160,
-		.sizeimage = 160 * 120 * 5 / 4,
+		.sizeimage = 160 * 120,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 2 | MODE_RAW},
 	{160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
@@ -264,7 +264,7 @@ static struct v4l2_pix_format sif_mode[] = {
 		.priv = 1 | MODE_REDUCED_SIF},
 	{176, 144, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
 		.bytesperline = 176,
-		.sizeimage = 176 * 144 * 5 / 4,
+		.sizeimage = 176 * 144,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 1 | MODE_RAW},
 	{176, 144, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
-- 
cgit v1.2.3


From 6c832e36447821779344f3d33970a4a7a10245cc Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sun, 24 Aug 2008 06:29:30 -0300
Subject: V4L/DVB (8789): wm8739: remove wrong kfree

i2c_client is allocated for us, we should never free it ourselves.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/wm8739.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/media/video/wm8739.c b/drivers/media/video/wm8739.c
index 95c79ad80487..54ac3fe26ec2 100644
--- a/drivers/media/video/wm8739.c
+++ b/drivers/media/video/wm8739.c
@@ -274,10 +274,8 @@ static int wm8739_probe(struct i2c_client *client,
 			client->addr << 1, client->adapter->name);
 
 	state = kmalloc(sizeof(struct wm8739_state), GFP_KERNEL);
-	if (state == NULL) {
-		kfree(client);
+	if (state == NULL)
 		return -ENOMEM;
-	}
 	state->vol_l = 0x17; /* 0dB */
 	state->vol_r = 0x17; /* 0dB */
 	state->muted = 0;
-- 
cgit v1.2.3


From bdba4d6b77fcc76f206986d7cc55f1feb20301f8 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 10 Sep 2008 23:38:51 -0700
Subject: sparc32: Fix function signature of of_bus_sbus_get_flags().

This doesn't match the function pointer type it gets assigned
to.  Luckily, this was harmless.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/of_device.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/sparc/kernel/of_device.c b/arch/sparc/kernel/of_device.c
index c481d45f97b7..f58c537446a8 100644
--- a/arch/sparc/kernel/of_device.c
+++ b/arch/sparc/kernel/of_device.c
@@ -241,7 +241,7 @@ static int of_bus_sbus_map(u32 *addr, const u32 *range, int na, int ns, int pna)
 	return of_bus_default_map(addr, range, na, ns, pna);
 }
 
-static unsigned int of_bus_sbus_get_flags(const u32 *addr)
+static unsigned long of_bus_sbus_get_flags(const u32 *addr, unsigned long flags)
 {
 	return IORESOURCE_MEM;
 }
-- 
cgit v1.2.3


From baf25731e54d06eb13dc4eda78c6dc7da4ce84e8 Mon Sep 17 00:00:00 2001
From: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Date: Tue, 9 Sep 2008 11:26:33 +0800
Subject: sched: fix 2.6.27-rc5 couldn't boot on tulsa machine randomly

On my tulsa x86-64 machine, kernel 2.6.25-rc5 couldn't boot randomly.

Basically, function __enable_runtime forgets to reset rt_rq->rt_throttled
to 0. When every cpu is up, per-cpu migration_thread is created and it runs
very fast, sometimes to mark the corresponding rt_rq->rt_throttled to 1 very
quickly. After all cpus are up, with below calling chain:

   sched_init_smp => arch_init_sched_domains => build_sched_domains => ...
=> cpu_attach_domain => rq_attach_root => set_rq_online => ...
=> _enable_runtime

_enable_runtime is called against every rt_rq again, so rt_rq->rt_time is
reset to 0, but rt_rq->rt_throttled might be still 1. Later on function
do_sched_rt_period_timer couldn't reset it, and all RT tasks couldn't be
scheduled to run on that cpu. here is RT task migration_thread which is
woken up when a task is migrated to another cpu.

Below patch fixes it against 2.6.27-rc5.

Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched_rt.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 552310798dad..1113157b2058 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -350,6 +350,7 @@ static void __enable_runtime(struct rq *rq)
 		spin_lock(&rt_rq->rt_runtime_lock);
 		rt_rq->rt_runtime = rt_b->rt_runtime;
 		rt_rq->rt_time = 0;
+		rt_rq->rt_throttled = 0;
 		spin_unlock(&rt_rq->rt_runtime_lock);
 		spin_unlock(&rt_b->rt_runtime_lock);
 	}
-- 
cgit v1.2.3


From ec5d498991e87c74730509508b25c3959192b7e7 Mon Sep 17 00:00:00 2001
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Date: Wed, 10 Sep 2008 17:00:19 -0700
Subject: sched: fix deadlock in setting scheduler parameter to zero

Andrei Gusev wrote:

> I played witch scheduler settings. After doing something like:
> echo -n 1000000 >sched_rt_period_us
>
> command is locked. I found in kernel.log:
>
> Sep 11 00:39:34 zaratustra
> Sep 11 00:39:34 zaratustra Pid: 4495, comm: bash Tainted: G        W
> (2.6.26.3 #12)
> Sep 11 00:39:34 zaratustra EIP: 0060:[<c0213fc7>] EFLAGS: 00210246 CPU: 0
> Sep 11 00:39:34 zaratustra EIP is at div64_u64+0x57/0x80
> Sep 11 00:39:34 zaratustra EAX: 0000389f EBX: 00000000 ECX: 00000000
> EDX: 00000000
> Sep 11 00:39:34 zaratustra ESI: d9800000 EDI: d9800000 EBP: 0000389f
> ESP: ea7a6edc
> Sep 11 00:39:34 zaratustra DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
> Sep 11 00:39:34 zaratustra Process bash (pid: 4495, ti=ea7a6000
> task=ea744000 task.ti=ea7a6000)
> Sep 11 00:39:34 zaratustra Stack: 00000000 000003e8 d9800000 0000389f
> c0119042 00000000 00000000 00000001
> Sep 11 00:39:34 zaratustra 00000000 00000000 ea7a6f54 00010000 00000000
> c04d2e80 00000001 000e7ef0
> Sep 11 00:39:34 zaratustra c01191a3 00000000 00000000 ea7a6fa0 00000001
> ffffffff c04d2e80 ea5b2480
> Sep 11 00:39:34 zaratustra Call Trace:
> Sep 11 00:39:34 zaratustra [<c0119042>] __rt_schedulable+0x52/0x130
> Sep 11 00:39:34 zaratustra [<c01191a3>] sched_rt_handler+0x83/0x120
> Sep 11 00:39:34 zaratustra [<c01a76a6>] proc_sys_call_handler+0xb6/0xd0
> Sep 11 00:39:34 zaratustra [<c01a76c0>] proc_sys_write+0x0/0x20
> Sep 11 00:39:34 zaratustra [<c01a76d9>] proc_sys_write+0x19/0x20
> Sep 11 00:39:34 zaratustra [<c016cc68>] vfs_write+0xa8/0x140
> Sep 11 00:39:34 zaratustra [<c016cdd1>] sys_write+0x41/0x80
> Sep 11 00:39:34 zaratustra [<c0103051>] sysenter_past_esp+0x6a/0x91
> Sep 11 00:39:34 zaratustra =======================
> Sep 11 00:39:34 zaratustra Code: c8 41 0f ad f3 d3 ee f6 c1 20 0f 45 de
> 31 f6 0f ad ef d3 ed f6 c1 20 0f 45 fd 0f 45 ee 31 c9 39 eb 89 fe 89 ea
> 77 08 89 e8 31 d2 <f7> f3 89 c1 89 f0 8b 7c 24 08 f7 f3 8b 74 24 04 89
> ca 8b 1c 24
> Sep 11 00:39:34 zaratustra EIP: [<c0213fc7>] div64_u64+0x57/0x80 SS:ESP
> 0068:ea7a6edc
> Sep 11 00:39:34 zaratustra ---[ end trace 4eaa2a86a8e2da22 ]---

fix the boundary condition.

sysctl_sched_rt_period=0 makes exception at to_ratio().

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/kernel/sched.c b/kernel/sched.c
index cc1f81b50b82..98890807375b 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -8909,6 +8909,9 @@ static int sched_rt_global_constraints(void)
 	u64 rt_runtime, rt_period;
 	int ret = 0;
 
+	if (sysctl_sched_rt_period <= 0)
+		return -EINVAL;
+
 	rt_period = ktime_to_ns(tg->rt_bandwidth.rt_period);
 	rt_runtime = tg->rt_bandwidth.rt_runtime;
 
@@ -8925,6 +8928,9 @@ static int sched_rt_global_constraints(void)
 	unsigned long flags;
 	int i;
 
+	if (sysctl_sched_rt_period <= 0)
+		return -EINVAL;
+
 	spin_lock_irqsave(&def_rt_bandwidth.rt_runtime_lock, flags);
 	for_each_possible_cpu(i) {
 		struct rt_rq *rt_rq = &cpu_rq(i)->rt;
-- 
cgit v1.2.3


From 44874f84918e37b64bec6df1587e5fe2fdf6ab62 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 27 Aug 2008 14:18:43 +0200
Subject: KVM: SVM: fix random segfaults with NPT enabled

This patch introduces a guest TLB flush on every NPF exit in KVM. This fixes
random segfaults and #UD exceptions in the guest seen under some workloads
(e.g. long running compile workloads or tbench). A kernbench run with and
without that fix showed that it has a slowdown lower than 0.5%

Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 arch/x86/kvm/svm.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index e2ee264740c7..d1106cddab0d 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -62,6 +62,7 @@ static int npt = 1;
 module_param(npt, int, S_IRUGO);
 
 static void kvm_reput_irq(struct vcpu_svm *svm);
+static void svm_flush_tlb(struct kvm_vcpu *vcpu);
 
 static inline struct vcpu_svm *to_svm(struct kvm_vcpu *vcpu)
 {
@@ -1027,6 +1028,13 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 		KVMTRACE_3D(TDP_FAULT, &svm->vcpu, error_code,
 			    (u32)fault_address, (u32)(fault_address >> 32),
 			    handler);
+	/*
+	 * FIXME: Tis shouldn't be necessary here, but there is a flush
+	 * missing in the MMU code. Until we find this bug, flush the
+	 * complete TLB here on an NPF
+	 */
+	if (npt_enabled)
+		svm_flush_tlb(&svm->vcpu);
 
 	if (event_injection)
 		kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);
-- 
cgit v1.2.3


From e5eab0cede4b1ffaca4ad857d840127622038e55 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Tue, 9 Sep 2008 19:11:51 +0200
Subject: KVM: SVM: fix guest global tlb flushes with NPT

Accesses to CR4 are intercepted even with Nested Paging enabled. But the code
does not check if the guest wants to do a global TLB flush. So this flush gets
lost. This patch adds the check and the flush to svm_set_cr4.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 arch/x86/kvm/svm.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index d1106cddab0d..8233b86c778c 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -879,6 +879,10 @@ set:
 static void svm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
 	unsigned long host_cr4_mce = read_cr4() & X86_CR4_MCE;
+	unsigned long old_cr4 = to_svm(vcpu)->vmcb->save.cr4;
+
+	if (npt_enabled && ((old_cr4 ^ cr4) & X86_CR4_PGE))
+		force_new_asid(vcpu);
 
 	vcpu->arch.cr4 = cr4;
 	if (!npt_enabled)
-- 
cgit v1.2.3


From 534e38b447df47f129a6d3ec3af6705c1e3f651e Mon Sep 17 00:00:00 2001
From: Sheng Yang <sheng.yang@intel.com>
Date: Mon, 8 Sep 2008 15:12:30 +0800
Subject: KVM: VMX: Always return old for clear_flush_young() when using EPT

As well as discard fake accessed bit and dirty bit of EPT.

Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 arch/x86/kvm/mmu.c | 4 ++++
 arch/x86/kvm/vmx.c | 3 +--
 arch/x86/kvm/vmx.h | 2 --
 3 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 0bfe2bd305eb..3da2508eb22a 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -711,6 +711,10 @@ static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp)
 	u64 *spte;
 	int young = 0;
 
+	/* always return old for EPT */
+	if (!shadow_accessed_mask)
+		return 0;
+
 	spte = rmap_next(kvm, rmapp, NULL);
 	while (spte) {
 		int _young;
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 2a69773e3b26..7041cc52b562 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3301,8 +3301,7 @@ static int __init vmx_init(void)
 		kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
 			VMX_EPT_WRITABLE_MASK |
 			VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
-		kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK,
-				VMX_EPT_FAKE_DIRTY_MASK, 0ull,
+		kvm_mmu_set_mask_ptes(0ull, 0ull, 0ull, 0ull,
 				VMX_EPT_EXECUTABLE_MASK);
 		kvm_enable_tdp();
 	} else
diff --git a/arch/x86/kvm/vmx.h b/arch/x86/kvm/vmx.h
index 425a13436b3f..23e8373507ad 100644
--- a/arch/x86/kvm/vmx.h
+++ b/arch/x86/kvm/vmx.h
@@ -370,8 +370,6 @@ enum vmcs_field {
 #define VMX_EPT_READABLE_MASK			0x1ull
 #define VMX_EPT_WRITABLE_MASK			0x2ull
 #define VMX_EPT_EXECUTABLE_MASK			0x4ull
-#define VMX_EPT_FAKE_ACCESSED_MASK		(1ull << 62)
-#define VMX_EPT_FAKE_DIRTY_MASK			(1ull << 63)
 
 #define VMX_EPT_IDENTITY_PAGETABLE_ADDR		0xfffbc000ul
 
-- 
cgit v1.2.3


From f1926ce63b996b42772b39e4b47bb4ef4ba748b4 Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Thu, 11 Sep 2008 11:09:49 +0200
Subject: clocksource, acpi_pm.c: fix check for monotonicity
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Actually check the monotonicity of the ACPI PMTMR ten times, only delay for
0.9 miliseconds at most, and bail out early if some problem is determined.

Reported-by: Jochen Voß <jochen.voss@googlemail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 drivers/clocksource/acpi_pm.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index 4eee533f3f4a..71d2ac4e3f46 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -178,11 +178,13 @@ static int verify_pmtmr_rate(void)
 
 /* Number of monotonicity checks to perform during initialization */
 #define ACPI_PM_MONOTONICITY_CHECKS 10
+/* Number of reads we try to get two different values */
+#define ACPI_PM_READ_CHECKS 10000
 
 static int __init init_acpi_pm_clocksource(void)
 {
 	cycle_t value1, value2;
-	unsigned int i, j, good = 0;
+	unsigned int i, j = 0;
 
 	if (!pmtmr_ioport)
 		return -ENODEV;
@@ -192,29 +194,26 @@ static int __init init_acpi_pm_clocksource(void)
 
 	/* "verify" this timing source: */
 	for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) {
+		udelay(100 * j);
 		value1 = clocksource_acpi_pm.read();
-		for (i = 0; i < 10000; i++) {
+		for (i = 0; i < ACPI_PM_READ_CHECKS; i++) {
 			value2 = clocksource_acpi_pm.read();
 			if (value2 == value1)
 				continue;
 			if (value2 > value1)
-				good++;
 				break;
 			if ((value2 < value1) && ((value2) < 0xFFF))
-				good++;
 				break;
 			printk(KERN_INFO "PM-Timer had inconsistent results:"
 			       " 0x%#llx, 0x%#llx - aborting.\n",
 			       value1, value2);
 			return -EINVAL;
 		}
-		udelay(300 * i);
-	}
-
-	if (good != ACPI_PM_MONOTONICITY_CHECKS) {
-		printk(KERN_INFO "PM-Timer failed consistency check "
-		       " (0x%#llx) - aborting.\n", value1);
-		return -ENODEV;
+		if (i == ACPI_PM_READ_CHECKS) {
+			printk(KERN_INFO "PM-Timer failed consistency check "
+			       " (0x%#llx) - aborting.\n", value1);
+			return -ENODEV;
+		}
 	}
 
 	if (verify_pmtmr_rate() != 0)
-- 
cgit v1.2.3


From 7736c09c6cf9521f2413d78856a66f4a37046e84 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Tue, 9 Sep 2008 10:16:22 +0100
Subject: [ARM] OMAP: Fix MMC device data

OMAPs MMC device data was passing the wrong structure via the platform
device.  Moreover, a missing function means that both sx1_defconfig
and omap_h2_1610_defconfig builds failed with

	undefined reference to `omap_set_mmc_info'

errors.  Fix this by updating the MMC support from the omapzoom tree.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-omap/devices.c | 123 ++++++++++++++++++++++++++++++++-----------
 1 file changed, 91 insertions(+), 32 deletions(-)

diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 187e3d8bfdfe..bc1cf30c83e0 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -21,6 +21,7 @@
 
 #include <mach/tc.h>
 #include <mach/board.h>
+#include <mach/mmc.h>
 #include <mach/mux.h>
 #include <mach/gpio.h>
 #include <mach/menelaus.h>
@@ -194,25 +195,38 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 
 /*-------------------------------------------------------------------------*/
 
-#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
 
-#ifdef CONFIG_ARCH_OMAP24XX
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 #define	OMAP_MMC1_BASE		0x4809c000
-#define OMAP_MMC1_INT		INT_24XX_MMC_IRQ
+#define	OMAP_MMC1_END		(OMAP_MMC1_BASE + 0x1fc)
+#define	OMAP_MMC1_INT		INT_24XX_MMC_IRQ
+
+#define	OMAP_MMC2_BASE		0x480b4000
+#define	OMAP_MMC2_END		(OMAP_MMC2_BASE + 0x1fc)
+#define	OMAP_MMC2_INT		INT_24XX_MMC2_IRQ
+
 #else
+
 #define	OMAP_MMC1_BASE		0xfffb7800
+#define	OMAP_MMC1_END		(OMAP_MMC1_BASE + 0x7f)
 #define OMAP_MMC1_INT		INT_MMC
-#endif
+
 #define	OMAP_MMC2_BASE		0xfffb7c00	/* omap16xx only */
+#define	OMAP_MMC2_END		(OMAP_MMC2_BASE + 0x7f)
+#define	OMAP_MMC2_INT		INT_1610_MMC2
 
-static struct omap_mmc_conf mmc1_conf;
+#endif
+
+static struct omap_mmc_platform_data mmc1_data;
 
 static u64 mmc1_dmamask = 0xffffffff;
 
 static struct resource mmc1_resources[] = {
 	{
 		.start		= OMAP_MMC1_BASE,
-		.end		= OMAP_MMC1_BASE + 0x7f,
+		.end		= OMAP_MMC1_END,
 		.flags		= IORESOURCE_MEM,
 	},
 	{
@@ -226,26 +240,27 @@ static struct platform_device mmc_omap_device1 = {
 	.id		= 1,
 	.dev = {
 		.dma_mask	= &mmc1_dmamask,
-		.platform_data	= &mmc1_conf,
+		.platform_data	= &mmc1_data,
 	},
 	.num_resources	= ARRAY_SIZE(mmc1_resources),
 	.resource	= mmc1_resources,
 };
 
-#ifdef	CONFIG_ARCH_OMAP16XX
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+	defined(CONFIG_ARCH_OMAP34XX)
 
-static struct omap_mmc_conf mmc2_conf;
+static struct omap_mmc_platform_data mmc2_data;
 
 static u64 mmc2_dmamask = 0xffffffff;
 
 static struct resource mmc2_resources[] = {
 	{
 		.start		= OMAP_MMC2_BASE,
-		.end		= OMAP_MMC2_BASE + 0x7f,
+		.end		= OMAP_MMC2_END,
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= INT_1610_MMC2,
+		.start		= OMAP_MMC2_INT,
 		.flags		= IORESOURCE_IRQ,
 	},
 };
@@ -255,26 +270,19 @@ static struct platform_device mmc_omap_device2 = {
 	.id		= 2,
 	.dev = {
 		.dma_mask	= &mmc2_dmamask,
-		.platform_data	= &mmc2_conf,
+		.platform_data	= &mmc2_data,
 	},
 	.num_resources	= ARRAY_SIZE(mmc2_resources),
 	.resource	= mmc2_resources,
 };
 #endif
 
-static void __init omap_init_mmc(void)
+static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf)
 {
-	const struct omap_mmc_config	*mmc_conf;
-	const struct omap_mmc_conf	*mmc;
-
-	/* NOTE:  assumes MMC was never (wrongly) enabled */
-	mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
-	if (!mmc_conf)
+	if (cpu_is_omap2430() || cpu_is_omap34xx())
 		return;
 
-	/* block 1 is always available and has just one pinout option */
-	mmc = &mmc_conf->mmc[0];
-	if (mmc->enabled) {
+	if (mmc_conf->mmc[0].enabled) {
 		if (cpu_is_omap24xx()) {
 			omap_cfg_reg(H18_24XX_MMC_CMD);
 			omap_cfg_reg(H15_24XX_MMC_CLKI);
@@ -292,7 +300,7 @@ static void __init omap_init_mmc(void)
 				omap_cfg_reg(P20_1710_MMC_DATDIR0);
 			}
 		}
-		if (mmc->wire4) {
+		if (mmc_conf->mmc[0].wire4) {
 			if (cpu_is_omap24xx()) {
 				omap_cfg_reg(H14_24XX_MMC_DAT1);
 				omap_cfg_reg(E19_24XX_MMC_DAT2);
@@ -303,25 +311,35 @@ static void __init omap_init_mmc(void)
 			} else {
 				omap_cfg_reg(MMC_DAT1);
 				/* NOTE:  DAT2 can be on W10 (here) or M15 */
-				if (!mmc->nomux)
+				if (!mmc_conf->mmc[0].nomux)
 					omap_cfg_reg(MMC_DAT2);
 				omap_cfg_reg(MMC_DAT3);
 			}
 		}
-		mmc1_conf = *mmc;
-		(void) platform_device_register(&mmc_omap_device1);
+#if defined(CONFIG_ARCH_OMAP2420)
+		if (mmc_conf->mmc[0].internal_clock) {
+			/*
+			 * Use internal loop-back in MMC/SDIO
+			 * Module Input Clock selection
+			 */
+			if (cpu_is_omap24xx()) {
+				u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+				v |= (1 << 24); /* not used in 243x */
+				omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
+			}
+		}
+#endif
 	}
 
 #ifdef	CONFIG_ARCH_OMAP16XX
 	/* block 2 is on newer chips, and has many pinout options */
-	mmc = &mmc_conf->mmc[1];
-	if (mmc->enabled) {
-		if (!mmc->nomux) {
+	if (mmc_conf->mmc[1].enabled) {
+		if (!mmc_conf->mmc[1].nomux) {
 			omap_cfg_reg(Y8_1610_MMC2_CMD);
 			omap_cfg_reg(Y10_1610_MMC2_CLK);
 			omap_cfg_reg(R18_1610_MMC2_CLKIN);
 			omap_cfg_reg(W8_1610_MMC2_DAT0);
-			if (mmc->wire4) {
+			if (mmc_conf->mmc[1].wire4) {
 				omap_cfg_reg(V8_1610_MMC2_DAT1);
 				omap_cfg_reg(W15_1610_MMC2_DAT2);
 				omap_cfg_reg(R10_1610_MMC2_DAT3);
@@ -337,14 +355,55 @@ static void __init omap_init_mmc(void)
 		if (cpu_is_omap1710())
 			omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
 				     MOD_CONF_CTRL_1);
-		mmc2_conf = *mmc;
+	}
+#endif
+}
+
+static void __init omap_init_mmc(void)
+{
+	const struct omap_mmc_config	*mmc_conf;
+
+	/* NOTE:  assumes MMC was never (wrongly) enabled */
+	mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
+	if (!mmc_conf)
+		return;
+
+	omap_init_mmc_conf(mmc_conf);
+
+	if (mmc_conf->mmc[0].enabled) {
+		mmc1_data.conf = mmc_conf->mmc[0];
+		(void) platform_device_register(&mmc_omap_device1);
+	}
+
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+	defined(CONFIG_ARCH_OMAP34XX)
+	if (mmc_conf->mmc[1].enabled) {
+		mmc2_data.conf = mmc_conf->mmc[1];
 		(void) platform_device_register(&mmc_omap_device2);
 	}
 #endif
-	return;
 }
+
+void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info)
+{
+	switch (host) {
+	case 1:
+		mmc1_data = *info;
+		break;
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+	defined(CONFIG_ARCH_OMAP34XX)
+	case 2:
+		mmc2_data = *info;
+		break;
+#endif
+	default:
+		BUG();
+	}
+}
+
 #else
 static inline void omap_init_mmc(void) {}
+void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) {}
 #endif
 
 /*-------------------------------------------------------------------------*/
-- 
cgit v1.2.3


From 2dc75d3c3b49c64fd26b4832a7efb75546cb3fc5 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Thu, 11 Sep 2008 14:20:23 +0200
Subject: block: disable sysfs parts of the disk command filter

We still have life time issues with the sysfs command filter kobject,
so disable it for 2.6.27 release. We can revisit this and make it work
properly for 2.6.28, for 2.6.27 release it's too risky.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/cmd-filter.c     | 2 ++
 drivers/ide/ide-cd.c   | 2 --
 drivers/scsi/sd.c      | 2 --
 drivers/scsi/sr.c      | 2 --
 include/linux/blkdev.h | 2 --
 5 files changed, 2 insertions(+), 8 deletions(-)

diff --git a/block/cmd-filter.c b/block/cmd-filter.c
index 228b6447e89f..79c14996ac11 100644
--- a/block/cmd-filter.c
+++ b/block/cmd-filter.c
@@ -49,6 +49,7 @@ int blk_verify_command(struct blk_cmd_filter *filter,
 }
 EXPORT_SYMBOL(blk_verify_command);
 
+#if 0
 /* and now, the sysfs stuff */
 static ssize_t rcf_cmds_show(struct blk_cmd_filter *filter, char *page,
 			     int rw)
@@ -233,3 +234,4 @@ void blk_unregister_filter(struct gendisk *disk)
 	kobject_put(disk->holder_dir->parent);
 }
 EXPORT_SYMBOL(blk_unregister_filter);
+#endif
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index f1489999cf91..49a8c589e346 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1933,7 +1933,6 @@ static void ide_cd_remove(ide_drive_t *drive)
 
 	ide_proc_unregister_driver(drive, info->driver);
 
-	blk_unregister_filter(info->disk);
 	del_gendisk(info->disk);
 
 	ide_cd_put(info);
@@ -2159,7 +2158,6 @@ static int ide_cd_probe(ide_drive_t *drive)
 	g->fops = &idecd_ops;
 	g->flags |= GENHD_FL_REMOVABLE;
 	add_disk(g);
-	blk_register_filter(g);
 	return 0;
 
 out_free_cd:
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 2a2bc89aba83..e5e7d7856454 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1875,7 +1875,6 @@ static int sd_probe(struct device *dev)
 
 	dev_set_drvdata(dev, sdkp);
 	add_disk(gd);
-	blk_register_filter(gd);
 	sd_dif_config_host(sdkp);
 
 	sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
@@ -1909,7 +1908,6 @@ static int sd_remove(struct device *dev)
 	struct scsi_disk *sdkp = dev_get_drvdata(dev);
 
 	device_del(&sdkp->dev);
-	blk_unregister_filter(sdkp->disk);
 	del_gendisk(sdkp->disk);
 	sd_shutdown(dev);
 
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 3292965bfd84..27f5bfd1def3 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -656,7 +656,6 @@ static int sr_probe(struct device *dev)
 	dev_set_drvdata(dev, cd);
 	disk->flags |= GENHD_FL_REMOVABLE;
 	add_disk(disk);
-	blk_register_filter(disk);
 
 	sdev_printk(KERN_DEBUG, sdev,
 		    "Attached scsi CD-ROM %s\n", cd->cdi.name);
@@ -895,7 +894,6 @@ static int sr_remove(struct device *dev)
 {
 	struct scsi_cd *cd = dev_get_drvdata(dev);
 
-	blk_unregister_filter(cd->disk);
 	del_gendisk(cd->disk);
 
 	mutex_lock(&sr_ref_mutex);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 44710d7e7bff..53ea933cf60b 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -843,8 +843,6 @@ extern int blkdev_issue_flush(struct block_device *, sector_t *);
 */
 extern int blk_verify_command(struct blk_cmd_filter *filter,
 			      unsigned char *cmd, int has_write_perm);
-extern int blk_register_filter(struct gendisk *disk);
-extern void blk_unregister_filter(struct gendisk *disk);
 extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter);
 
 #define MAX_PHYS_SEGMENTS 128
-- 
cgit v1.2.3


From 69da6b87fcb270f758fe75141c32e041f8db510c Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Mon, 11 Aug 2008 14:01:50 +0300
Subject: ath9k: Assign seq# when mac80211 requests this

Use TX control flag IEEE80211_TX_CTL_ASSIGN_SEQ as a request to update
the seq# for the frames. This will likely require some further cleanup
to get seq# correctly for Beacons vs. other frames and also potentially
for multiple BSSes. Anyway, this is better than ending up sending out
most frames with seq# 0.

(This is a backport of patch w/ same title already in net-next-2.6.
It is verified to fix http://bugzilla.kernel.org/show_bug.cgi?id=11394
and it should be acceptable for -rc due to the driver being new
in 2.6.27.)

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/beacon.c | 13 +++++++++++++
 drivers/net/wireless/ath9k/core.h   |  1 +
 drivers/net/wireless/ath9k/main.c   | 14 ++++++++++++++
 3 files changed, 28 insertions(+)

diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c
index caf569401a34..00a0eaa08866 100644
--- a/drivers/net/wireless/ath9k/beacon.c
+++ b/drivers/net/wireless/ath9k/beacon.c
@@ -209,6 +209,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
 	unsigned int curlen;
 	struct ath_txq *cabq;
 	struct ath_txq *mcastq;
+	struct ieee80211_tx_info *info;
 	avp = sc->sc_vaps[if_id];
 
 	mcastq = &avp->av_mcastq;
@@ -232,6 +233,18 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
 	 */
 	curlen = skb->len;
 
+	info = IEEE80211_SKB_CB(skb);
+	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+		/*
+		 * TODO: make sure the seq# gets assigned properly (vs. other
+		 * TX frames)
+		 */
+		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+		sc->seq_no += 0x10;
+		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		hdr->seq_ctrl |= cpu_to_le16(sc->seq_no);
+	}
+
 	/* XXX: spin_lock_bh should not be used here, but sparse bitches
 	 * otherwise. We should fix sparse :) */
 	spin_lock_bh(&mcastq->axq_lock);
diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h
index 673b3d81133a..4ee695b76b88 100644
--- a/drivers/net/wireless/ath9k/core.h
+++ b/drivers/net/wireless/ath9k/core.h
@@ -992,6 +992,7 @@ struct ath_softc {
 	u32 sc_txintrperiod;	/* tx interrupt batching */
 	int sc_haltype2q[ATH9K_WME_AC_VO+1]; /* HAL WME	AC -> h/w qnum */
 	u32 sc_ant_tx[8];	/* recent tx frames/antenna */
+	u16 seq_no; /* TX sequence number */
 
 	/* Beacon */
 	struct ath9k_tx_queue_info sc_beacon_qi;
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index c5107f269f24..99badf1404c3 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -369,6 +369,20 @@ static int ath9k_tx(struct ieee80211_hw *hw,
 {
 	struct ath_softc *sc = hw->priv;
 	int hdrlen, padsize;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+	/*
+	 * As a temporary workaround, assign seq# here; this will likely need
+	 * to be cleaned up to work better with Beacon transmission and virtual
+	 * BSSes.
+	 */
+	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+		if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+			sc->seq_no += 0x10;
+		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		hdr->seq_ctrl |= cpu_to_le16(sc->seq_no);
+	}
 
 	/* Add the padding after the header if this is not already done */
 	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
-- 
cgit v1.2.3


From 50bed2e2862a8f3a4f7d683d0d27292e71ef18b9 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Thu, 11 Sep 2008 18:35:39 +0200
Subject: sg: disable interrupts inside sg_copy_buffer

The callers of sg_copy_buffer must disable interrupts before calling
it (since it uses kmap_atomic). Some callers use it on
interrupt-disabled code but some need to take the trouble to disable
interrupts just for this. No wonder they forget about it and we hit a
bug like:

http://bugzilla.kernel.org/show_bug.cgi?id=11529

James said that it might be better to disable interrupts inside the
function rather than risk the callers getting it wrong.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 lib/scatterlist.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index 876ba6d5b670..8d2688ff1352 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -422,9 +422,12 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
 {
 	unsigned int offset = 0;
 	struct sg_mapping_iter miter;
+	unsigned long flags;
 
 	sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC);
 
+	local_irq_save(flags);
+
 	while (sg_miter_next(&miter) && offset < buflen) {
 		unsigned int len;
 
@@ -442,6 +445,7 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
 
 	sg_miter_stop(&miter);
 
+	local_irq_restore(flags);
 	return offset;
 }
 
-- 
cgit v1.2.3


From d1c6d2e547148c5aa0c0a4ff6aac82f7c6da1d8b Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Thu, 11 Sep 2008 17:18:56 +0100
Subject: MN10300: Change the fault handler to check in_atomic() not
 in_interrupt()

Change the MN10300 fault handler to make it check in_atomic() rather than
in_interrupt() as commit 6edaf68a87d17570790fd55f0c451a29ec1d6703 did for other
architectures:

	Author: Peter Zijlstra <a.p.zijlstra@chello.nl>
	Date:   Wed Dec 6 20:32:18 2006 -0800

	[PATCH] mm: arch do_page_fault() vs in_atomic()

	In light of the recent pagefault and filemap_copy_from_user work I've
	gone through all the arch pagefault handlers to make sure the
	inc_preempt_count() 'feature' works as expected.

	Several sections of code (including the new filemap_copy_from_user)
	rely on the fact that faults do not take locks under increased preempt
	count.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/mm/fault.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
index 78f092ca0316..33cf25025dac 100644
--- a/arch/mn10300/mm/fault.c
+++ b/arch/mn10300/mm/fault.c
@@ -174,7 +174,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long fault_code,
 	 * If we're in an interrupt or have no user
 	 * context, we must not take the fault..
 	 */
-	if (in_interrupt() || !mm)
+	if (in_atomic() || !mm)
 		goto no_context;
 
 	down_read(&mm->mmap_sem);
-- 
cgit v1.2.3


From 7c6a329e444725f24c02192ac493d8a7cd9fa638 Mon Sep 17 00:00:00 2001
From: Marcel Holtmann <marcel@holtmann.org>
Date: Fri, 12 Sep 2008 03:11:54 +0200
Subject: [Bluetooth] Fix regression from using default link policy

To speed up the Simple Pairing connection setup, the support for the
default link policy has been enabled. This is in contrast to settings
the link policy on every connection setup. Using the default link policy
is the preferred way since there is no need to dynamically change it for
every connection.

For backward compatibility reason and to support old userspace the
HCISETLINKPOL ioctl has been switched over to using hci_request() to
issue the HCI command for setting the default link policy instead of
just storing it in the HCI device structure.

However the hci_request() can only be issued when the device is
brought up. If used on a device that is registered, but still down
it will timeout and fail. This is problematic since the command is
put on the TX queue and the Bluetooth core tries to submit it to
hardware that is not ready yet. The timeout for these requests is
10 seconds and this causes a significant regression when setting up
a new device.

The userspace can perfectly handle a failure of the HCISETLINKPOL
ioctl and will re-submit it later, but the 10 seconds delay causes
a problem. So in case hci_request() is called on a device that is
still down, just fail it with ENETDOWN to indicate what happens.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 net/bluetooth/hci_core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index f5b21cb93699..278a3ace14f6 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -164,6 +164,9 @@ static inline int hci_request(struct hci_dev *hdev, void (*req)(struct hci_dev *
 {
 	int ret;
 
+	if (!test_bit(HCI_UP, &hdev->flags))
+		return -ENETDOWN;
+
 	/* Serialize all requests */
 	hci_req_lock(hdev);
 	ret = __hci_request(hdev, req, opt, timeout);
-- 
cgit v1.2.3


From 1045b03e07d85f3545118510a587035536030c1c Mon Sep 17 00:00:00 2001
From: Vegard Nossum <vegard.nossum@gmail.com>
Date: Thu, 11 Sep 2008 19:05:29 -0700
Subject: netlink: fix overrun in attribute iteration

kmemcheck reported this:

  kmemcheck: Caught 16-bit read from uninitialized memory (f6c1ba30)
  0500110001508abf050010000500000002017300140000006f72672e66726565
   i i i i i i i i i i i i i u u u u u u u u u u u u u u u u u u u
                                   ^

  Pid: 3462, comm: wpa_supplicant Not tainted (2.6.27-rc3-00054-g6397ab9-dirty #13)
  EIP: 0060:[<c05de64a>] EFLAGS: 00010296 CPU: 0
  EIP is at nla_parse+0x5a/0xf0
  EAX: 00000008 EBX: fffffffd ECX: c06f16c0 EDX: 00000005
  ESI: 00000010 EDI: f6c1ba30 EBP: f6367c6c ESP: c0a11e88
   DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
  CR0: 8005003b CR2: f781cc84 CR3: 3632f000 CR4: 000006d0
  DR0: c0ead9bc DR1: 00000000 DR2: 00000000 DR3: 00000000
  DR6: ffff4ff0 DR7: 00000400
   [<c05d4b23>] rtnl_setlink+0x63/0x130
   [<c05d5f75>] rtnetlink_rcv_msg+0x165/0x200
   [<c05ddf66>] netlink_rcv_skb+0x76/0xa0
   [<c05d5dfe>] rtnetlink_rcv+0x1e/0x30
   [<c05dda21>] netlink_unicast+0x281/0x290
   [<c05ddbe9>] netlink_sendmsg+0x1b9/0x2b0
   [<c05beef2>] sock_sendmsg+0xd2/0x100
   [<c05bf945>] sys_sendto+0xa5/0xd0
   [<c05bf9a6>] sys_send+0x36/0x40
   [<c05c03d6>] sys_socketcall+0x1e6/0x2c0
   [<c020353b>] sysenter_do_call+0x12/0x3f
   [<ffffffff>] 0xffffffff

This is the line in nla_ok():

  /**
   * nla_ok - check if the netlink attribute fits into the remaining bytes
   * @nla: netlink attribute
   * @remaining: number of bytes remaining in attribute stream
   */
  static inline int nla_ok(const struct nlattr *nla, int remaining)
  {
          return remaining >= sizeof(*nla) &&
                 nla->nla_len >= sizeof(*nla) &&
                 nla->nla_len <= remaining;
  }

It turns out that remaining can become negative due to alignment in
nla_next(). But GCC promotes "remaining" to unsigned in the test
against sizeof(*nla) above. Therefore the test succeeds, and the
nla_for_each_attr() may access memory outside the received buffer.

A short example illustrating this point is here:

  #include <stdio.h>

  main(void)
  {
          printf("%d\n", -1 >= sizeof(int));
  }

...which prints "1".

This patch adds a cast in front of the sizeof so that GCC will make
a signed comparison and fix the illegal memory dereference. With the
patch applied, there is no kmemcheck report.

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/netlink.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/net/netlink.h b/include/net/netlink.h
index 18024b8cecb8..208fe5a38546 100644
--- a/include/net/netlink.h
+++ b/include/net/netlink.h
@@ -702,7 +702,7 @@ static inline int nla_len(const struct nlattr *nla)
  */
 static inline int nla_ok(const struct nlattr *nla, int remaining)
 {
-	return remaining >= sizeof(*nla) &&
+	return remaining >= (int) sizeof(*nla) &&
 	       nla->nla_len >= sizeof(*nla) &&
 	       nla->nla_len <= remaining;
 }
-- 
cgit v1.2.3


From 0ad5bce7409d681a5655c66e64bb0eb740b89c1f Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 11 Sep 2008 16:42:00 -0700
Subject: x86: fix possible x86_64 and EFI regression

Russ Anderson reported a boot crash with EFI and latest mainline:

 BIOS-e820: 00000000fffa0000 - 00000000fffac000 (reserved)
Pid: 0, comm: swapper Not tainted 2.6.27-rc5-00100-gec0c15a-dirty #5

Call Trace:
 [<ffffffff80849195>] early_idt_handler+0x55/0x69
 [<ffffffff80313e52>] __memcpy+0x12/0xa4
 [<ffffffff80859015>] efi_init+0xce/0x932
 [<ffffffff80869c83>] setup_early_serial8250_console+0x2d/0x36a
 [<ffffffff80238688>] __insert_resource+0x18/0xc8
 [<ffffffff8084f6de>] setup_arch+0x3a7/0x632
 [<ffffffff808499ed>] start_kernel+0x91/0x367
 [<ffffffff80849393>] x86_64_start_kernel+0xe3/0xe7
 [<ffffffff808492b0>] x86_64_start_kernel+0x0/0xe7

 RIP 0x10

Such a crash is possible if the CPU in this system is a 64-bit
processor which doesn't support NX (ie, old Intel P4 -based64-bit
processors).

Certainly, if we support such processors, then we should start with
_PAGE_NX initially clear in __supported_pte_flags, and then set it once
we've established that the processor does indeed support NX.  That will
prevent early_ioremap - or anything else - from trying to set it.

The simple fix is to simply call check_efer() earlier.

Reported-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 362d4e7f2d38..9838f2539dfc 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -670,6 +670,10 @@ void __init setup_arch(char **cmdline_p)
 
 	parse_early_param();
 
+#ifdef CONFIG_X86_64
+	check_efer();
+#endif
+
 #if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
 	/*
 	 * Must be before kernel pagetables are setup
@@ -738,7 +742,6 @@ void __init setup_arch(char **cmdline_p)
 #else
 	num_physpages = max_pfn;
 
-	check_efer();
 
 	/* How many end-of-memory variables you have, grandma! */
 	/* need this before calling reserve_initrd */
-- 
cgit v1.2.3


From 80a56ab626c70468be92e74cf3d288ffaed23fdb Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Fri, 12 Sep 2008 15:13:15 -0700
Subject: sparc64: Fix PCI error interrupt registry on PSYCHO.

We need to pass IRQF_SHARED, otherwise we get things like:

IRQ handler type mismatch for IRQ 33
current handler: PSYCHO_UE
Call Trace:
 [000000000048394c] request_irq+0xac/0x120
 [00000000007c5f6c] psycho_scan_bus+0x98/0x158
 [00000000007c2bc0] pcibios_init+0xdc/0x12c
 [0000000000426a5c] do_one_initcall+0x1c/0x160
 [00000000007c0180] kernel_init+0x9c/0xfc
 [0000000000427050] kernel_thread+0x30/0x60
 [00000000006ae1d0] rest_init+0x10/0x60

on e3500 and similar systems.

On a single board, the UE interrupts of two Psycho nodes
are funneled through the same interrupt, from of_debug=3
dump:

/pci@b,4000: direct translate 2ee --> 21
 ...
/pci@b,2000: direct translate 2ee --> 21

Decimal "33" mentioned above is the hex "21" mentioned here.

Thanks to Meelis Roos for dumps and testing.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc64/kernel/pci_psycho.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c
index ef5fe29202c2..e205ade69cfc 100644
--- a/arch/sparc64/kernel/pci_psycho.c
+++ b/arch/sparc64/kernel/pci_psycho.c
@@ -744,16 +744,16 @@ static void psycho_register_error_handlers(struct pci_pbm_info *pbm)
 	 * the second will just error out since we do not pass in
 	 * IRQF_SHARED.
 	 */
-	err = request_irq(op->irqs[1], psycho_ue_intr, 0,
+	err = request_irq(op->irqs[1], psycho_ue_intr, IRQF_SHARED,
 			  "PSYCHO_UE", pbm);
-	err = request_irq(op->irqs[2], psycho_ce_intr, 0,
+	err = request_irq(op->irqs[2], psycho_ce_intr, IRQF_SHARED,
 			  "PSYCHO_CE", pbm);
 
 	/* This one, however, ought not to fail.  We can just warn
 	 * about it since the system can still operate properly even
 	 * if this fails.
 	 */
-	err = request_irq(op->irqs[0], psycho_pcierr_intr, 0,
+	err = request_irq(op->irqs[0], psycho_pcierr_intr, IRQF_SHARED,
 			  "PSYCHO_PCIERR", pbm);
 	if (err)
 		printk(KERN_WARNING "%s: Could not register PCIERR, "
-- 
cgit v1.2.3


From 7d4ee289d139d27b619c08c9809e7b1088c100aa Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Fri, 12 Sep 2008 15:01:31 -0700
Subject: sparc: Fix user_regset 'n' field values.

As noticed by Russell King, we were not setting this properly
to the number of entries, but rather the total size.

This results in the core dumping code allocating waayyyy too
much memory.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/ptrace.c   | 4 ++--
 arch/sparc64/kernel/ptrace.c | 8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/sparc/kernel/ptrace.c b/arch/sparc/kernel/ptrace.c
index 20699c701412..8ce6285a06d5 100644
--- a/arch/sparc/kernel/ptrace.c
+++ b/arch/sparc/kernel/ptrace.c
@@ -288,7 +288,7 @@ static const struct user_regset sparc32_regsets[] = {
 	 */
 	[REGSET_GENERAL] = {
 		.core_note_type = NT_PRSTATUS,
-		.n = 38 * sizeof(u32),
+		.n = 38,
 		.size = sizeof(u32), .align = sizeof(u32),
 		.get = genregs32_get, .set = genregs32_set
 	},
@@ -304,7 +304,7 @@ static const struct user_regset sparc32_regsets[] = {
 	 */
 	[REGSET_FP] = {
 		.core_note_type = NT_PRFPREG,
-		.n = 99 * sizeof(u32),
+		.n = 99,
 		.size = sizeof(u32), .align = sizeof(u32),
 		.get = fpregs32_get, .set = fpregs32_set
 	},
diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c
index bd578cc4856d..10306e476e38 100644
--- a/arch/sparc64/kernel/ptrace.c
+++ b/arch/sparc64/kernel/ptrace.c
@@ -443,7 +443,7 @@ static const struct user_regset sparc64_regsets[] = {
 	 */
 	[REGSET_GENERAL] = {
 		.core_note_type = NT_PRSTATUS,
-		.n = 36 * sizeof(u64),
+		.n = 36,
 		.size = sizeof(u64), .align = sizeof(u64),
 		.get = genregs64_get, .set = genregs64_set
 	},
@@ -455,7 +455,7 @@ static const struct user_regset sparc64_regsets[] = {
 	 */
 	[REGSET_FP] = {
 		.core_note_type = NT_PRFPREG,
-		.n = 35 * sizeof(u64),
+		.n = 35,
 		.size = sizeof(u64), .align = sizeof(u64),
 		.get = fpregs64_get, .set = fpregs64_set
 	},
@@ -801,7 +801,7 @@ static const struct user_regset sparc32_regsets[] = {
 	 */
 	[REGSET_GENERAL] = {
 		.core_note_type = NT_PRSTATUS,
-		.n = 38 * sizeof(u32),
+		.n = 38,
 		.size = sizeof(u32), .align = sizeof(u32),
 		.get = genregs32_get, .set = genregs32_set
 	},
@@ -817,7 +817,7 @@ static const struct user_regset sparc32_regsets[] = {
 	 */
 	[REGSET_FP] = {
 		.core_note_type = NT_PRFPREG,
-		.n = 99 * sizeof(u32),
+		.n = 99,
 		.size = sizeof(u32), .align = sizeof(u32),
 		.get = fpregs32_get, .set = fpregs32_set
 	},
-- 
cgit v1.2.3


From cff502a38394fd33693f6233e03fca363dfa956d Mon Sep 17 00:00:00 2001
From: Santwona Behera <santwona.behera@sun.com>
Date: Fri, 12 Sep 2008 16:04:26 -0700
Subject: niu: panic on reset

The reset_task function in the niu driver does not reset the tx and rx
buffers properly. This leads to panic on reset. This patch is a
modified implementation of the previously posted fix.

Signed-off-by: Santwona Behera <santwona.behera@sun.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/niu.c | 56 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index e4765b713aba..e3be81eba8a4 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -5984,6 +5984,56 @@ static void niu_netif_start(struct niu *np)
 	niu_enable_interrupts(np, 1);
 }
 
+static void niu_reset_buffers(struct niu *np)
+{
+	int i, j, k, err;
+
+	if (np->rx_rings) {
+		for (i = 0; i < np->num_rx_rings; i++) {
+			struct rx_ring_info *rp = &np->rx_rings[i];
+
+			for (j = 0, k = 0; j < MAX_RBR_RING_SIZE; j++) {
+				struct page *page;
+
+				page = rp->rxhash[j];
+				while (page) {
+					struct page *next =
+						(struct page *) page->mapping;
+					u64 base = page->index;
+					base = base >> RBR_DESCR_ADDR_SHIFT;
+					rp->rbr[k++] = cpu_to_le32(base);
+					page = next;
+				}
+			}
+			for (; k < MAX_RBR_RING_SIZE; k++) {
+				err = niu_rbr_add_page(np, rp, GFP_ATOMIC, k);
+				if (unlikely(err))
+					break;
+			}
+
+			rp->rbr_index = rp->rbr_table_size - 1;
+			rp->rcr_index = 0;
+			rp->rbr_pending = 0;
+			rp->rbr_refill_pending = 0;
+		}
+	}
+	if (np->tx_rings) {
+		for (i = 0; i < np->num_tx_rings; i++) {
+			struct tx_ring_info *rp = &np->tx_rings[i];
+
+			for (j = 0; j < MAX_TX_RING_SIZE; j++) {
+				if (rp->tx_buffs[j].skb)
+					(void) release_tx_packet(np, rp, j);
+			}
+
+			rp->pending = MAX_TX_RING_SIZE;
+			rp->prod = 0;
+			rp->cons = 0;
+			rp->wrap_bit = 0;
+		}
+	}
+}
+
 static void niu_reset_task(struct work_struct *work)
 {
 	struct niu *np = container_of(work, struct niu, reset_task);
@@ -6006,6 +6056,12 @@ static void niu_reset_task(struct work_struct *work)
 
 	niu_stop_hw(np);
 
+	spin_unlock_irqrestore(&np->lock, flags);
+
+	niu_reset_buffers(np);
+
+	spin_lock_irqsave(&np->lock, flags);
+
 	err = niu_init_hw(np);
 	if (!err) {
 		np->timer.expires = jiffies + HZ;
-- 
cgit v1.2.3


From 395a125c6237802b19bf22b41017c99ff57f1024 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yhlu.kernel@gmail.com>
Date: Tue, 9 Sep 2008 12:27:52 -0700
Subject: PCI: re-add debug prints for unmodified BARs

Print out for device BAR values before the kernel tries to update them.
Also make related output use KERN_DEBUG.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/probe.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 0ad936765b26..36698e57b97f 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -304,6 +304,9 @@ static int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 		} else {
 			res->start = l64;
 			res->end = l64 + sz64;
+			printk(KERN_DEBUG "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n",
+				pci_name(dev), pos, (unsigned long long)res->start,
+				(unsigned long long)res->end);
 		}
 	} else {
 		sz = pci_size(l, sz, mask);
@@ -313,6 +316,9 @@ static int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 
 		res->start = l;
 		res->end = l + sz;
+		printk(KERN_DEBUG "PCI: %s reg %x %s: [%llx, %llx]\n", pci_name(dev),
+			pos, (res->flags & IORESOURCE_IO) ? "io port":"32bit mmio",
+			(unsigned long long)res->start, (unsigned long long)res->end);
 	}
 
  out:
@@ -383,7 +389,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 			res->start = base;
 		if (!res->end)
 			res->end = limit + 0xfff;
-		printk(KERN_INFO "PCI: bridge %s io port: [%llx, %llx]\n",
+		printk(KERN_DEBUG "PCI: bridge %s io port: [%llx, %llx]\n",
 			pci_name(dev), (unsigned long long) res->start,
 			(unsigned long long) res->end);
 	}
@@ -397,8 +403,9 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
 		res->start = base;
 		res->end = limit + 0xfffff;
-		printk(KERN_INFO "PCI: bridge %s 32bit mmio: [%llx, %llx]\n", pci_name(dev),
-			(unsigned long long) res->start, (unsigned long long) res->end);
+		printk(KERN_DEBUG "PCI: bridge %s 32bit mmio: [%llx, %llx]\n",
+			pci_name(dev), (unsigned long long) res->start,
+			(unsigned long long) res->end);
 	}
 
 	res = child->resource[2];
@@ -434,7 +441,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
 		res->start = base;
 		res->end = limit + 0xfffff;
-		printk(KERN_INFO "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n",
+		printk(KERN_DEBUG "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n",
 			pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64) ? "64" : "32",
 			(unsigned long long) res->start, (unsigned long long) res->end);
 	}
-- 
cgit v1.2.3


From 048feec5548c0582ee96148c61b87cccbcb5f9be Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Thu, 11 Sep 2008 22:19:45 -0700
Subject: [SCSI] qla2xxx: Defer enablement of RISC interrupts until ISP
 initialization completes.

Josip Rodin noted
(http://article.gmane.org/gmane.linux.ports.sparc/10152) the
driver oopsing during registration of an rport to the
FC-transport layer with a backtrace indicating a dereferencing of
an shost->shost_data equal to NULL.  David Miller identified a
small window in driver logic where this could happen:

    > Look at how the driver registers the IRQ handler before the host has
    > been registered with the SCSI layer.
    >
    > That leads to a window of time where the shost hasn't been setup
    > fully, yet ISRs can come in and trigger DPC thread events, such as
    > loop resyncs, which expect the transport area to be setup.
    >
    > But it won't be setup, because scsi_add_host() hasn't finished yet.
    >
    > Note that in Josip's crash log, we don't even see the
    >
    >         qla_printk(KERN_INFO, ha, "\n"
    >             " QLogic Fibre Channel HBA Driver: %s\n"
    >             "  QLogic %s - %s\n"
    >             "  ISP%04X: %s @ %s hdma%c, host#=%ld, fw=%s\n",
    >  ...
    >
    > message yet.
    >
    > Which means that the crash occurs between qla2x00_request_irqs()
    > and printing that message.

Close this window by enabling RISC interrupts after the host has
been registered with the SCSI midlayer.

Reported-by: Josip Rodin <joy@entuzijast.net>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_isr.c | 1 -
 drivers/scsi/qla2xxx/qla_os.c  | 2 ++
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 45a3b93eed57..bf41887cdd65 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1834,7 +1834,6 @@ clear_risc_ints:
 		WRT_REG_WORD(&reg->isp.hccr, HCCR_CLR_HOST_INT);
 	}
 	spin_unlock_irq(&ha->hardware_lock);
-	ha->isp_ops->enable_intrs(ha);
 
 fail:
 	return ret;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 26afe44265c7..6d0f0e5f2827 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1740,6 +1740,8 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (ret)
 		goto probe_failed;
 
+	ha->isp_ops->enable_intrs(ha);
+
 	scsi_scan_host(host);
 
 	qla2x00_alloc_sysfs_attr(ha);
-- 
cgit v1.2.3


From 632480ea6548ae66e89a49ef037fd593c7a52418 Mon Sep 17 00:00:00 2001
From: Jürgen Schindele <linux@schindele.name>
Date: Mon, 8 Sep 2008 22:06:29 +0100
Subject: [ARM] 5245/1: Fix warning about unused return value in drivers/pcmcia

Fix warning when compiling "drivers/pcmcia/soc-common.c"
The return value of the function "device_create_file"
was not used / assigned.

Signed-off-by: Jrgen Schindele <linux@schindele.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/pcmcia/soc_common.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index c48f3f69bdaf..da3972153226 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -748,7 +748,9 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops
 
 		add_timer(&skt->poll_timer);
 
-		device_create_file(&skt->socket.dev, &dev_attr_status);
+		ret = device_create_file(&skt->socket.dev, &dev_attr_status);
+		if (ret)
+			goto out_err_8;
 	}
 
 	dev_set_drvdata(dev, sinfo);
@@ -758,6 +760,8 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops
 	do {
 		skt = &sinfo->skt[i];
 
+		device_remove_file(&skt->socket.dev, &dev_attr_status);
+ out_err_8:
 		del_timer_sync(&skt->poll_timer);
 		pcmcia_unregister_socket(&skt->socket);
 
-- 
cgit v1.2.3


From 7bdb22c9d4b4f526b81770cd719d2f5dddf0373d Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Wed, 10 Sep 2008 10:30:37 +0100
Subject: [ARM] 5246/1: tosa: add proper clock alias for tc6393xb clock

Add clock alias for clock that is used by tc6393xb device on tosa.
As that chip plays pretty major part in tosa life and is currently
disabled, this is 2.4.27 material.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/tosa.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 5dab30eafddc..33da99fa1ccf 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -50,6 +50,7 @@
 #include <asm/mach/sharpsl_param.h>
 
 #include "generic.h"
+#include "clock.h"
 #include "devices.h"
 
 static unsigned long tosa_pin_config[] = {
@@ -792,6 +793,8 @@ static void __init tosa_init(void)
 	pxa_set_i2c_info(NULL);
 	platform_scoop_config = &tosa_pcmcia_config;
 
+	clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
-- 
cgit v1.2.3


From c33de47bce74e0c890f9f830a7641371524edbc1 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Thu, 11 Sep 2008 01:28:51 +0100
Subject: [ARM] 5247/1: tosa: SW_EAR_IN support

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/tosa.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 33da99fa1ccf..9f3ef9eb32e3 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -522,6 +522,14 @@ static struct gpio_keys_button tosa_gpio_keys[] = {
 		.wakeup	= 1,
 		.active_low = 1,
 	},
+	{
+		.type	= EV_SW,
+		.code	= SW_HEADPHONE_INSERT,
+		.gpio	= TOSA_GPIO_EAR_IN,
+		.desc	= "HeadPhone insert",
+		.active_low = 1,
+		.debounce_interval = 300,
+	},
 };
 
 static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
-- 
cgit v1.2.3


From 88c381bf09d7b3f2c2e8749150087aff2c434be4 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 13 Sep 2008 21:23:06 +0100
Subject: [ARM] Fix PCI_DMA_BUS_IS_PHYS for ARM

PCI_DMA_BUS_IS_PHYS was defined to be zero, which meant we ignored
the DMA mask for IDE and SCSI transfers.  This is wrong - we have
no DMA translation hardware.  We want to obey DMA masks so that the
block layer performs bouncing itself.

Reported-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/pci.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h
index 721c03d53f4b..918d0cbbf064 100644
--- a/arch/arm/include/asm/pci.h
+++ b/arch/arm/include/asm/pci.h
@@ -30,7 +30,7 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
  * The networking and block device layers use this boolean for bounce
  * buffer decisions.
  */
-#define PCI_DMA_BUS_IS_PHYS     (0)
+#define PCI_DMA_BUS_IS_PHYS     (1)
 
 /*
  * Whether pci_unmap_{single,page} is a nop depends upon the
-- 
cgit v1.2.3


From da3ceb2288d0b50373b69d57a81c34fdd7cd11aa Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Mon, 8 Sep 2008 09:31:39 -0700
Subject: ata: duplicate variable sparse warning

drivers/ata/ata_piix.c:1502:7: warning: symbol 'rc' shadows an earlier one

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/ata_piix.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index b1d08a8f5003..e6b4606e36b6 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1499,7 +1499,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 	 * off.
 	 */
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2652) {
-		int rc = piix_disable_ahci(pdev);
+		rc = piix_disable_ahci(pdev);
 		if (rc)
 			return rc;
 	}
-- 
cgit v1.2.3


From 99580664aa83ca04bb52988d504a4195b41833b0 Mon Sep 17 00:00:00 2001
From: Bob Stewart <bob@evoria.net>
Date: Thu, 11 Sep 2008 11:50:03 +0200
Subject: sata_inic162x: enable LED blinking

Enable LED blinking.

Signed-off-by: Bob Stewart <bob@evoria.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_inic162x.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 3ead02fe379e..5032c32fa505 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -96,6 +96,7 @@ enum {
 	PORT_SCR		= 0x20,
 
 	/* HOST_CTL bits */
+	HCTL_LEDEN		= (1 << 3),  /* enable LED operation */
 	HCTL_IRQOFF		= (1 << 8),  /* global IRQ off */
 	HCTL_FTHD0		= (1 << 10), /* fifo threshold 0 */
 	HCTL_FTHD1		= (1 << 11), /* fifo threshold 1*/
@@ -540,7 +541,7 @@ static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
 	void __iomem *port_base = inic_port_base(ap);
 
 	/* fire up the ADMA engine */
-	writew(HCTL_FTHD0, port_base + HOST_CTL);
+	writew(HCTL_FTHD0 | HCTL_LEDEN, port_base + HOST_CTL);
 	writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL);
 	writeb(0, port_base + PORT_CPB_PTQFIFO);
 
-- 
cgit v1.2.3


From 97b697a11b07e2ebfa69c488132596cc5eb24119 Mon Sep 17 00:00:00 2001
From: Taisuke Yamada <tai@rakugaki.org>
Date: Sat, 13 Sep 2008 16:46:15 -0400
Subject: [libata] LBA28/LBA48 off-by-one bug in ata.h

I recently bought 3 HGST P7K500-series 500GB SATA drives and
had trouble accessing the block right on the LBA28-LBA48 border.
Here's how it fails (same for all 3 drives):

  # dd if=/dev/sdc bs=512 count=1 skip=268435455 > /dev/null
  dd: reading `/dev/sdc': Input/output error
  0+0 records in
  0+0 records out
  0 bytes (0 B) copied, 0.288033 seconds, 0.0 kB/s
  # dmesg
  ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  ata1.00: BMDMA stat 0x25
  ata1.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in
  res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error)
  ata1.00: status: { DRDY ERR }
  ata1.00: error: { ABRT }
  ata1.00: configured for UDMA/33
  ata1: EH complete
  ...

After some investigations, it turned out this seems to be caused
by misinterpretation of the ATA specification on LBA28 access.
Following part is the code in question:

  === include/linux/ata.h ===
  static inline int lba_28_ok(u64 block, u32 n_block)
  {
    /* check the ending block number */
    return ((block + n_block - 1) < ((u64)1 << 28)) && (n_block <= 256);
  }

HGST drive (sometimes) fails with LBA28 access of {block = 0xfffffff,
n_block = 1}, and this behavior seems to be comformant. Other drives,
including other HGST drives are not that strict, through.

>From the ATA specification:
(http://www.t13.org/Documents/UploadedDocuments/project/d1410r3b-ATA-ATAPI-6.pdf)

  8.15.29  Word (61:60): Total number of user addressable sectors
  This field contains a value that is one greater than the total number
  of user addressable sectors (see 6.2). The maximum value that shall
  be placed in this field is 0FFFFFFFh.

So the driver shouldn't use the value of 0xfffffff for LBA28 request
as this exceeds maximum user addressable sector. The logical maximum
value for LBA28 is 0xffffffe.

The obvious fix is to cut "- 1" part, and the patch attached just do
that. I've been using the patched kernel for about a month now, and
the same fix is also floating on the net for some time. So I believe
this fix works reliably.

Just FYI, many Windows/Intel platform users also seems to be struck
by this, and HGST has issued a note pointing to Intel ICH8/9 driver.

  "28-bit LBA command is being used to access LBAs 29-bits in length"
http://www.hitachigst.com/hddt/knowtree.nsf/cffe836ed7c12018862565b000530c74/b531b8bce8745fb78825740f00580e23

Also, *BSDs seems to have similar fix included sometime around ~2004,
through I have not checked out exact portion of the code.

Signed-off-by: Taisuke Yamada <tai@rakugaki.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 include/linux/ata.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/ata.h b/include/linux/ata.h
index 1ce19c1ef0e9..8a12d718c169 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -745,7 +745,7 @@ static inline int ata_ok(u8 status)
 static inline int lba_28_ok(u64 block, u32 n_block)
 {
 	/* check the ending block number */
-	return ((block + n_block - 1) < ((u64)1 << 28)) && (n_block <= 256);
+	return ((block + n_block) < ((u64)1 << 28)) && (n_block <= 256);
 }
 
 static inline int lba_48_ok(u64 block, u32 n_block)
-- 
cgit v1.2.3


From 665020c35e89a9e0643e21561e4f8f967f4f2c4b Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Sat, 13 Sep 2008 02:33:06 -0700
Subject: proc: more debugging for "already registered" case

Print parent directory name as well.

The aim is to catch non-creation of parent directory when proc_mkdir will
return NULL and all subsequent registrations go directly in /proc instead
of intended directory.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Fixed insane printk string while at it.  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/generic.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index bca0f81eb687..7821589a17d5 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -547,8 +547,8 @@ static int proc_register(struct proc_dir_entry * dir, struct proc_dir_entry * dp
 
 	for (tmp = dir->subdir; tmp; tmp = tmp->next)
 		if (strcmp(tmp->name, dp->name) == 0) {
-			printk(KERN_WARNING "proc_dir_entry '%s' already "
-					"registered\n", dp->name);
+			printk(KERN_WARNING "proc_dir_entry '%s/%s' already registered\n",
+				dir->name, dp->name);
 			dump_stack();
 			break;
 		}
-- 
cgit v1.2.3


From dea420ce0e2973e8ef1fd11fde6804c8d03a82ad Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Sat, 13 Sep 2008 02:33:07 -0700
Subject: include/linux/ioport.h: add missing macro argument for devm_release_*
 family

akpm: these have no callers at this time, but they shall soon, so let's
get them right.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/ioport.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index 8d3b7a9afd17..350033e8f4e1 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -159,9 +159,9 @@ extern struct resource * __devm_request_region(struct device *dev,
 				struct resource *parent, resource_size_t start,
 				resource_size_t n, const char *name);
 
-#define devm_release_region(start,n) \
+#define devm_release_region(dev, start, n) \
 	__devm_release_region(dev, &ioport_resource, (start), (n))
-#define devm_release_mem_region(start,n) \
+#define devm_release_mem_region(dev, start, n) \
 	__devm_release_region(dev, &iomem_resource, (start), (n))
 
 extern void __devm_release_region(struct device *dev, struct resource *parent,
-- 
cgit v1.2.3


From 4e74339af6a59c061cf02f1ac497766bca1de19a Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Sat, 13 Sep 2008 02:33:08 -0700
Subject: cpuset: avoid changing cpuset's cpus when -errno returned

After the patch:

commit 0b2f630a28d53b5a2082a5275bc3334b10373508
Author: Miao Xie <miaox@cn.fujitsu.com>
Date:   Fri Jul 25 01:47:21 2008 -0700

    cpusets: restructure the function update_cpumask() and update_nodemask()

It might happen that 'echo 0 > /cpuset/sub/cpus' returned failure but 'cpus'
has been changed, because cpus was changed before calling heap_init() which
may return -ENOMEM.

This patch restores the orginal behavior.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/cpuset.c | 37 +++++++++++++++----------------------
 1 file changed, 15 insertions(+), 22 deletions(-)

diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index f227bc172690..827cd9adccb2 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -843,37 +843,25 @@ static void cpuset_change_cpumask(struct task_struct *tsk,
 /**
  * update_tasks_cpumask - Update the cpumasks of tasks in the cpuset.
  * @cs: the cpuset in which each task's cpus_allowed mask needs to be changed
+ * @heap: if NULL, defer allocating heap memory to cgroup_scan_tasks()
  *
  * Called with cgroup_mutex held
  *
  * The cgroup_scan_tasks() function will scan all the tasks in a cgroup,
  * calling callback functions for each.
  *
- * Return 0 if successful, -errno if not.
+ * No return value. It's guaranteed that cgroup_scan_tasks() always returns 0
+ * if @heap != NULL.
  */
-static int update_tasks_cpumask(struct cpuset *cs)
+static void update_tasks_cpumask(struct cpuset *cs, struct ptr_heap *heap)
 {
 	struct cgroup_scanner scan;
-	struct ptr_heap heap;
-	int retval;
-
-	/*
-	 * cgroup_scan_tasks() will initialize heap->gt for us.
-	 * heap_init() is still needed here for we should not change
-	 * cs->cpus_allowed when heap_init() fails.
-	 */
-	retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL);
-	if (retval)
-		return retval;
 
 	scan.cg = cs->css.cgroup;
 	scan.test_task = cpuset_test_cpumask;
 	scan.process_task = cpuset_change_cpumask;
-	scan.heap = &heap;
-	retval = cgroup_scan_tasks(&scan);
-
-	heap_free(&heap);
-	return retval;
+	scan.heap = heap;
+	cgroup_scan_tasks(&scan);
 }
 
 /**
@@ -883,6 +871,7 @@ static int update_tasks_cpumask(struct cpuset *cs)
  */
 static int update_cpumask(struct cpuset *cs, const char *buf)
 {
+	struct ptr_heap heap;
 	struct cpuset trialcs;
 	int retval;
 	int is_load_balanced;
@@ -917,6 +906,10 @@ static int update_cpumask(struct cpuset *cs, const char *buf)
 	if (cpus_equal(cs->cpus_allowed, trialcs.cpus_allowed))
 		return 0;
 
+	retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL);
+	if (retval)
+		return retval;
+
 	is_load_balanced = is_sched_load_balance(&trialcs);
 
 	mutex_lock(&callback_mutex);
@@ -927,9 +920,9 @@ static int update_cpumask(struct cpuset *cs, const char *buf)
 	 * Scan tasks in the cpuset, and update the cpumasks of any
 	 * that need an update.
 	 */
-	retval = update_tasks_cpumask(cs);
-	if (retval < 0)
-		return retval;
+	update_tasks_cpumask(cs, &heap);
+
+	heap_free(&heap);
 
 	if (is_load_balanced)
 		async_rebuild_sched_domains();
@@ -1965,7 +1958,7 @@ static void scan_for_empty_cpusets(const struct cpuset *root)
 		     nodes_empty(cp->mems_allowed))
 			remove_tasks_in_empty_cpuset(cp);
 		else {
-			update_tasks_cpumask(cp);
+			update_tasks_cpumask(cp, NULL);
 			update_tasks_nodemask(cp, &oldmems);
 		}
 	}
-- 
cgit v1.2.3


From 024994310e10cd7632f43b6873558820308c1af1 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Sat, 13 Sep 2008 02:33:09 -0700
Subject: cpuset: hotplug documentation fix

If all the cpus in a cpuset are offlined, the tasks in it will be moved to
the nearest ancestor with non-empty cpus.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Jackson <pj@sgi.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/cpusets.txt | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt
index 1f5a924d1e56..47e568a9370a 100644
--- a/Documentation/cpusets.txt
+++ b/Documentation/cpusets.txt
@@ -635,14 +635,16 @@ prior 'mems' setting, will not be moved.
 
 There is an exception to the above.  If hotplug functionality is used
 to remove all the CPUs that are currently assigned to a cpuset,
-then the kernel will automatically update the cpus_allowed of all
-tasks attached to CPUs in that cpuset to allow all CPUs.  When memory
-hotplug functionality for removing Memory Nodes is available, a
-similar exception is expected to apply there as well.  In general,
-the kernel prefers to violate cpuset placement, over starving a task
-that has had all its allowed CPUs or Memory Nodes taken offline.  User
-code should reconfigure cpusets to only refer to online CPUs and Memory
-Nodes when using hotplug to add or remove such resources.
+then all the tasks in that cpuset will be moved to the nearest ancestor
+with non-empty cpus.  But the moving of some (or all) tasks might fail if
+cpuset is bound with another cgroup subsystem which has some restrictions
+on task attaching.  In this failing case, those tasks will stay
+in the original cpuset, and the kernel will automatically update
+their cpus_allowed to allow all online CPUs.  When memory hotplug
+functionality for removing Memory Nodes is available, a similar exception
+is expected to apply there as well.  In general, the kernel prefers to
+violate cpuset placement, over starving a task that has had all
+its allowed CPUs or Memory Nodes taken offline.
 
 There is a second exception to the above.  GFP_ATOMIC requests are
 kernel internal allocations that must be satisfied, immediately.
-- 
cgit v1.2.3


From b261dfea48e81636516f4fa653667097638a8a62 Mon Sep 17 00:00:00 2001
From: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Date: Sat, 13 Sep 2008 02:33:10 -0700
Subject: coredump_filter: add description of bit 4

There is no description of bit 4 of coredump_filter in the
documentation.  This patch adds it.

Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/filesystems/proc.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 394eb2cc1c39..f566ad9bcb7b 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -2413,6 +2413,8 @@ The following 4 memory types are supported:
   - (bit 1) anonymous shared memory
   - (bit 2) file-backed private memory
   - (bit 3) file-backed shared memory
+  - (bit 4) ELF header pages in file-backed private memory areas (it is
+            effective only if the bit 2 is cleared)
 
   Note that MMIO pages such as frame buffer are never dumped and vDSO pages
   are always dumped regardless of the bitmask status.
-- 
cgit v1.2.3


From 1558182f651798164418abf53f76786da0ea4a6f Mon Sep 17 00:00:00 2001
From: Eric Sesterhenn <snakebyte@gmx.de>
Date: Sat, 13 Sep 2008 02:33:12 -0700
Subject: bfs: fix Lockdep warning

This fixes:

  =============================================
  [ INFO: possible recursive locking detected ]
  2.6.27-rc5-00283-g70bb089 #68
  ---------------------------------------------
  touch/6855 is trying to acquire lock:
   (&info->bfs_lock){--..}, at: [<c02262f5>] bfs_delete_inode+0x9e/0x18c

  but task is already holding lock:
   (&info->bfs_lock){--..}, at: [<c0226c00>] bfs_create+0x45/0x187

  other info that might help us debug this:
  2 locks held by touch/6855:
   #0:  (&type->i_mutex_dir_key#5){--..}, at: [<c018ad13>] do_filp_open+0x10b/0x62f
   #1:  (&info->bfs_lock){--..}, at: [<c0226c00>] bfs_create+0x45/0x187

  stack backtrace:
  Pid: 6855, comm: touch Not tainted 2.6.27-rc5-00283-g70bb089 #68
   [<c013e769>] validate_chain+0x458/0x9f4
   [<c013bece>] ? trace_hardirqs_off+0xb/0xd
   [<c013f36b>] __lock_acquire+0x666/0x6e0
   [<c013f440>] lock_acquire+0x5b/0x77
   [<c02262f5>] ? bfs_delete_inode+0x9e/0x18c
   [<c06aab74>] mutex_lock_nested+0xbc/0x234
   [<c02262f5>] ? bfs_delete_inode+0x9e/0x18c
   [<c02262f5>] ? bfs_delete_inode+0x9e/0x18c
   [<c02262f5>] bfs_delete_inode+0x9e/0x18c
   [<c0226257>] ? bfs_delete_inode+0x0/0x18c
   [<c01925e1>] generic_delete_inode+0x94/0xfe
   [<c019265d>] generic_drop_inode+0x12/0x12f
   [<c0191b7e>] iput+0x4b/0x4e
   [<c0226d1e>] bfs_create+0x163/0x187
   [<c0188b42>] vfs_create+0xa6/0x114
   [<c018adb5>] do_filp_open+0x1ad/0x62f
   [<c0107cdc>] ? native_sched_clock+0x82/0x96
   [<c06ac309>] ? _spin_unlock+0x27/0x3c
   [<c019379e>] ? alloc_fd+0xbf/0xc9
   [<c06ae2f4>] ? sub_preempt_count+0x9d/0xab
   [<c019379e>] ? alloc_fd+0xbf/0xc9
   [<c0180391>] do_sys_open+0x42/0xb8
   [<c041d564>] ? trace_hardirqs_on_thunk+0xc/0x10
   [<c0180449>] sys_open+0x1e/0x26
   [<c01038bd>] sysenter_do_call+0x12/0x31
   =======================

The problem is that we don't unlock the bfs->lock mutex before calling
iput (we do in the other cases).

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/bfs/dir.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/bfs/dir.c b/fs/bfs/dir.c
index 87ee5ccee348..ed8feb052df9 100644
--- a/fs/bfs/dir.c
+++ b/fs/bfs/dir.c
@@ -125,8 +125,8 @@ static int bfs_create(struct inode *dir, struct dentry *dentry, int mode,
 							inode->i_ino);
 	if (err) {
 		inode_dec_link_count(inode);
-		iput(inode);
 		mutex_unlock(&info->bfs_lock);
+		iput(inode);
 		return err;
 	}
 	mutex_unlock(&info->bfs_lock);
-- 
cgit v1.2.3


From d7a3e4959c28bccc25dd33315809ffcf40f7493e Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh@veritas.com>
Date: Sat, 13 Sep 2008 02:33:13 -0700
Subject: mm: ifdef Quicklists in /proc/meminfo

A "Quicklists:          0 kB" line has just started appearing in
/proc/meminfo, but most architectures (including x86) don't have
them configured, so #ifdef it, like the highmem lines.

And those architectures which do have quicklists configured are
using them for page tables: so let's place it next to PageTables.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/proc_misc.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c
index 00f10a2dcf12..29e20c6b1f7f 100644
--- a/fs/proc/proc_misc.c
+++ b/fs/proc/proc_misc.c
@@ -183,6 +183,9 @@ static int meminfo_read_proc(char *page, char **start, off_t off,
 		"SReclaimable: %8lu kB\n"
 		"SUnreclaim:   %8lu kB\n"
 		"PageTables:   %8lu kB\n"
+#ifdef CONFIG_QUICKLIST
+		"Quicklists:   %8lu kB\n"
+#endif
 		"NFS_Unstable: %8lu kB\n"
 		"Bounce:       %8lu kB\n"
 		"WritebackTmp: %8lu kB\n"
@@ -190,8 +193,7 @@ static int meminfo_read_proc(char *page, char **start, off_t off,
 		"Committed_AS: %8lu kB\n"
 		"VmallocTotal: %8lu kB\n"
 		"VmallocUsed:  %8lu kB\n"
-		"VmallocChunk: %8lu kB\n"
-		"Quicklists:   %8lu kB\n",
+		"VmallocChunk: %8lu kB\n",
 		K(i.totalram),
 		K(i.freeram),
 		K(i.bufferram),
@@ -216,6 +218,9 @@ static int meminfo_read_proc(char *page, char **start, off_t off,
 		K(global_page_state(NR_SLAB_RECLAIMABLE)),
 		K(global_page_state(NR_SLAB_UNRECLAIMABLE)),
 		K(global_page_state(NR_PAGETABLE)),
+#ifdef CONFIG_QUICKLIST
+		K(quicklist_total_size()),
+#endif
 		K(global_page_state(NR_UNSTABLE_NFS)),
 		K(global_page_state(NR_BOUNCE)),
 		K(global_page_state(NR_WRITEBACK_TEMP)),
@@ -223,8 +228,7 @@ static int meminfo_read_proc(char *page, char **start, off_t off,
 		K(committed),
 		(unsigned long)VMALLOC_TOTAL >> 10,
 		vmi.used >> 10,
-		vmi.largest_chunk >> 10,
-		K(quicklist_total_size())
+		vmi.largest_chunk >> 10
 		);
 
 		len += hugetlb_report_meminfo(page + len);
-- 
cgit v1.2.3


From 53604dbe1371c3c4458c2d741adbd8cfd8fe8e79 Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Sat, 13 Sep 2008 02:33:14 -0700
Subject: spi_mpc83xx: fix clockrate calculation for low speed

Commit a61f5345 (spi_mpc83xx clockrate fixes) broke clockrate calculation
for low speeds.  SPMODE_DIV16 should be set if the divider is higher than
64, not only if the divider gets clipped to 1024.

Furthermore, the clipping check was off by a factor 16 as well.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/spi/spi_mpc83xx.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
index 070c6219e2d6..ab7ee445d8b2 100644
--- a/drivers/spi/spi_mpc83xx.c
+++ b/drivers/spi/spi_mpc83xx.c
@@ -267,16 +267,13 @@ int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 	cs->hw_mode |= SPMODE_LEN(bits_per_word);
 
 	if ((mpc83xx_spi->spibrg / hz) > 64) {
+		cs->hw_mode |= SPMODE_DIV16;
 		pm = mpc83xx_spi->spibrg / (hz * 64);
 		if (pm > 16) {
-			cs->hw_mode |= SPMODE_DIV16;
-			pm /= 16;
-			if (pm > 16) {
-				dev_err(&spi->dev, "Requested speed is too "
-					"low: %d Hz. Will use %d Hz instead.\n",
-					hz, mpc83xx_spi->spibrg / 1024);
-				pm = 16;
-			}
+			dev_err(&spi->dev, "Requested speed is too "
+				"low: %d Hz. Will use %d Hz instead.\n",
+				hz, mpc83xx_spi->spibrg / 1024);
+			pm = 16;
 		}
 	} else
 		pm = mpc83xx_spi->spibrg / (hz * 4);
-- 
cgit v1.2.3


From aa77d96ba94326db4f50d2aa36602824dd03286a Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Sat, 13 Sep 2008 02:33:15 -0700
Subject: spi_mpc83xx: reject invalid transfer sizes

Error out on transfer length != multiple of bytes per word with -EINVAL.
Fixes a buffer overrun crash if length < bytes per word.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/spi/spi_mpc83xx.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
index ab7ee445d8b2..ac0e3e4b3c54 100644
--- a/drivers/spi/spi_mpc83xx.c
+++ b/drivers/spi/spi_mpc83xx.c
@@ -312,11 +312,20 @@ static int mpc83xx_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
 	if (t->bits_per_word)
 		bits_per_word = t->bits_per_word;
 	len = t->len;
-	if (bits_per_word > 8)
+	if (bits_per_word > 8) {
+		/* invalid length? */
+		if (len & 1)
+			return -EINVAL;
 		len /= 2;
-	if (bits_per_word > 16)
+	}
+	if (bits_per_word > 16) {
+		/* invalid length? */
+		if (len & 1)
+			return -EINVAL;
 		len /= 2;
+	}
 	mpc83xx_spi->count = len;
+
 	INIT_COMPLETION(mpc83xx_spi->done);
 
 	/* enable rx ints */
-- 
cgit v1.2.3


From 8423597d676615f3dd2d9ab36f59f147086b90b8 Mon Sep 17 00:00:00 2001
From: Ned Forrester <nforrester@whoi.edu>
Date: Sat, 13 Sep 2008 02:33:17 -0700
Subject: pxa2xx_spi: chipselect bugfixes

Fixes several chipselect bugs in the pxa2xx_spi driver.  These bugs are in
all versions of this driver and prevent using it with chips like m25p16
flash.

 1. The spi_transfer.cs_change flag is handled too early:
    before spi_transfer.delay_usecs applies, thus making the
    delay ineffective at holding chip select.

 2. spi_transfer.delay_usecs is ignored on the last transfer
    of a message (likewise not holding chipselect long enough).

 3. If spi_transfer.cs_change is set on the last transfer, the
    chip select is always disabled, instead of the intended
    meaning: optionally holding chip select enabled for the
    next message.

Those first three bugs were fixed with a relocation of delays
and chip select de-assertions.

 4. If a message has the cs_change flag set on the last transfer,
    and had the chip select stayed enabled as requested (see 3,
    above), it would not have been disabled if the next message is
    for a different chip.  Fixed by dropping chip select regardless
    of cs_change at end of a message, if there is no next message
    or if the next message is for a different chip.

This patch should apply to all kernels back to and including 2.6.20;
it was test patched against 2.6.20.  An additional patch would be
required for older kernels, but those versions are very buggy anyway.

Signed-off-by: Ned Forrester <nforrester@whoi.edu>
Cc: Vernon Sauder <vernoninhand@gmail.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: <stable@kernel.org>		[2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/spi/pxa2xx_spi.c | 59 +++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 48 insertions(+), 11 deletions(-)

diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 34c7c9875681..a7b9070e1b46 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -144,7 +144,6 @@ struct driver_data {
 	size_t tx_map_len;
 	u8 n_bytes;
 	u32 dma_width;
-	int cs_change;
 	int (*write)(struct driver_data *drv_data);
 	int (*read)(struct driver_data *drv_data);
 	irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
@@ -406,8 +405,45 @@ static void giveback(struct driver_data *drv_data)
 					struct spi_transfer,
 					transfer_list);
 
+	/* Delay if requested before any change in chip select */
+	if (last_transfer->delay_usecs)
+		udelay(last_transfer->delay_usecs);
+
+	/* Drop chip select UNLESS cs_change is true or we are returning
+	 * a message with an error, or next message is for another chip
+	 */
 	if (!last_transfer->cs_change)
 		drv_data->cs_control(PXA2XX_CS_DEASSERT);
+	else {
+		struct spi_message *next_msg;
+
+		/* Holding of cs was hinted, but we need to make sure
+		 * the next message is for the same chip.  Don't waste
+		 * time with the following tests unless this was hinted.
+		 *
+		 * We cannot postpone this until pump_messages, because
+		 * after calling msg->complete (below) the driver that
+		 * sent the current message could be unloaded, which
+		 * could invalidate the cs_control() callback...
+		 */
+
+		/* get a pointer to the next message, if any */
+		spin_lock_irqsave(&drv_data->lock, flags);
+		if (list_empty(&drv_data->queue))
+			next_msg = NULL;
+		else
+			next_msg = list_entry(drv_data->queue.next,
+					struct spi_message, queue);
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+
+		/* see if the next and current messages point
+		 * to the same chip
+		 */
+		if (next_msg && next_msg->spi != msg->spi)
+			next_msg = NULL;
+		if (!next_msg || msg->state == ERROR_STATE)
+			drv_data->cs_control(PXA2XX_CS_DEASSERT);
+	}
 
 	msg->state = NULL;
 	if (msg->complete)
@@ -490,10 +526,9 @@ static void dma_transfer_complete(struct driver_data *drv_data)
 	msg->actual_length += drv_data->len -
 				(drv_data->rx_end - drv_data->rx);
 
-	/* Release chip select if requested, transfer delays are
-	 * handled in pump_transfers */
-	if (drv_data->cs_change)
-		drv_data->cs_control(PXA2XX_CS_DEASSERT);
+	/* Transfer delays and chip select release are
+	 * handled in pump_transfers or giveback
+	 */
 
 	/* Move to next transfer */
 	msg->state = next_transfer(drv_data);
@@ -602,10 +637,9 @@ static void int_transfer_complete(struct driver_data *drv_data)
 	drv_data->cur_msg->actual_length += drv_data->len -
 				(drv_data->rx_end - drv_data->rx);
 
-	/* Release chip select if requested, transfer delays are
-	 * handled in pump_transfers */
-	if (drv_data->cs_change)
-		drv_data->cs_control(PXA2XX_CS_DEASSERT);
+	/* Transfer delays and chip select release are
+	 * handled in pump_transfers or giveback
+	 */
 
 	/* Move to next transfer */
 	drv_data->cur_msg->state = next_transfer(drv_data);
@@ -840,13 +874,17 @@ static void pump_transfers(unsigned long data)
 		return;
 	}
 
-	/* Delay if requested at end of transfer*/
+	/* Delay if requested at end of transfer before CS change */
 	if (message->state == RUNNING_STATE) {
 		previous = list_entry(transfer->transfer_list.prev,
 					struct spi_transfer,
 					transfer_list);
 		if (previous->delay_usecs)
 			udelay(previous->delay_usecs);
+
+		/* Drop chip select only if cs_change is requested */
+		if (previous->cs_change)
+			drv_data->cs_control(PXA2XX_CS_DEASSERT);
 	}
 
 	/* Check transfer length */
@@ -878,7 +916,6 @@ static void pump_transfers(unsigned long data)
 	drv_data->len = transfer->len & DCMD_LENGTH;
 	drv_data->write = drv_data->tx ? chip->write : null_writer;
 	drv_data->read = drv_data->rx ? chip->read : null_reader;
-	drv_data->cs_change = transfer->cs_change;
 
 	/* Change speed and bit per word on a per transfer */
 	cr0 = chip->cr0;
-- 
cgit v1.2.3


From 7e96445533ac3f4f7964646a202ff3620602fab4 Mon Sep 17 00:00:00 2001
From: Ned Forrester <nforrester@whoi.edu>
Date: Sat, 13 Sep 2008 02:33:18 -0700
Subject: pxa2xx_spi: dma bugfixes

Fixes two DMA bugs in the pxa2xx_spi driver.  The first bug is in all
versions of this driver; the second was introduced in the 2.6.20 kernel,
and prevents using the driver with chips like m25p16 flash (which can
issue large DMA reads).

 1. Zero length transfers are permitted for use to insert timing,
    but pxa2xx_spi.c will fail if this is requested in DMA mode.
    Fixed by using programmed I/O (PIO) mode for such transfers.

 2. Transfers larger than 8191 are not permitted in DMA mode.  A
    test for length rejects all large transfers regardless of DMA
    or PIO mode.  Worked around by rejecting only large transfers
    with DMA mapped buffers, and forcing all other transfers
    larger than 8191 to use PIO mode.  A rate limited warning is
    issued for DMA transfers forced to PIO mode.

This patch should apply to all kernels back to and including 2.6.20;
it was test patched against 2.6.20.  An additional patch would be
required for older kernels, but those versions are very buggy anyway.

Signed-off-by: Ned Forrester <nforrester@whoi.edu>
Cc: Vernon Sauder <vernoninhand@gmail.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: <stable@kernel.org>		[2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/spi/pxa2xx_spi.c | 57 ++++++++++++++++++++++++++++++++++++------------
 1 file changed, 43 insertions(+), 14 deletions(-)

diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index a7b9070e1b46..0e53354c1cfe 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -47,9 +47,10 @@ MODULE_ALIAS("platform:pxa2xx-spi");
 
 #define MAX_BUSES 3
 
-#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
-#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
-#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
+#define DMA_INT_MASK		(DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
+#define RESET_DMA_CHANNEL	(DCSR_NODESC | DMA_INT_MASK)
+#define IS_DMA_ALIGNED(x)	(((x) & 0x07) == 0)
+#define MAX_DMA_LEN		8191
 
 /*
  * for testing SSCR1 changes that require SSP restart, basically
@@ -887,14 +888,27 @@ static void pump_transfers(unsigned long data)
 			drv_data->cs_control(PXA2XX_CS_DEASSERT);
 	}
 
-	/* Check transfer length */
-	if (transfer->len > 8191)
-	{
-		dev_warn(&drv_data->pdev->dev, "pump_transfers: transfer "
-				"length greater than 8191\n");
-		message->status = -EINVAL;
-		giveback(drv_data);
-		return;
+	/* Check for transfers that need multiple DMA segments */
+	if (transfer->len > MAX_DMA_LEN && chip->enable_dma) {
+
+		/* reject already-mapped transfers; PIO won't always work */
+		if (message->is_dma_mapped
+				|| transfer->rx_dma || transfer->tx_dma) {
+			dev_err(&drv_data->pdev->dev,
+				"pump_transfers: mapped transfer length "
+				"of %lu is greater than %d\n",
+				transfer->len, MAX_DMA_LEN);
+			message->status = -EINVAL;
+			giveback(drv_data);
+			return;
+		}
+
+		/* warn ... we force this to PIO mode */
+		if (printk_ratelimit())
+			dev_warn(&message->spi->dev, "pump_transfers: "
+				"DMA disabled for transfer length %ld "
+				"greater than %d\n",
+				(long)drv_data->len, MAX_DMA_LEN);
 	}
 
 	/* Setup the transfer state based on the type of transfer */
@@ -962,7 +976,7 @@ static void pump_transfers(unsigned long data)
 							&dma_thresh))
 				if (printk_ratelimit())
 					dev_warn(&message->spi->dev,
-						"pump_transfer: "
+						"pump_transfers: "
 						"DMA burst size reduced to "
 						"match bits_per_word\n");
 		}
@@ -976,8 +990,23 @@ static void pump_transfers(unsigned long data)
 
 	message->state = RUNNING_STATE;
 
-	/* Try to map dma buffer and do a dma transfer if successful */
-	if ((drv_data->dma_mapped = map_dma_buffers(drv_data))) {
+	/* Try to map dma buffer and do a dma transfer if successful, but
+	 * only if the length is non-zero and less than MAX_DMA_LEN.
+	 *
+	 * Zero-length non-descriptor DMA is illegal on PXA2xx; force use
+	 * of PIO instead.  Care is needed above because the transfer may
+	 * have have been passed with buffers that are already dma mapped.
+	 * A zero-length transfer in PIO mode will not try to write/read
+	 * to/from the buffers
+	 *
+	 * REVISIT large transfers are exactly where we most want to be
+	 * using DMA.  If this happens much, split those transfers into
+	 * multiple DMA segments rather than forcing PIO.
+	 */
+	drv_data->dma_mapped = 0;
+	if (drv_data->len > 0 && drv_data->len <= MAX_DMA_LEN)
+		drv_data->dma_mapped = map_dma_buffers(drv_data);
+	if (drv_data->dma_mapped) {
 
 		/* Ensure we have the correct interrupt handler */
 		drv_data->transfer_handler = dma_transfer;
-- 
cgit v1.2.3


From 5bead2a0680687b9576d57c177988e8aa082b922 Mon Sep 17 00:00:00 2001
From: Mel Gorman <mel@csn.ul.ie>
Date: Sat, 13 Sep 2008 02:33:19 -0700
Subject: mm: mark the correct zone as full when scanning zonelists

The iterator for_each_zone_zonelist() uses a struct zoneref *z cursor when
scanning zonelists to keep track of where in the zonelist it is.  The
zoneref that is returned corresponds to the the next zone that is to be
scanned, not the current one.  It was intended to be treated as an opaque
list.

When the page allocator is scanning a zonelist, it marks elements in the
zonelist corresponding to zones that are temporarily full.  As the
zonelist is being updated, it uses the cursor here;

  if (NUMA_BUILD)
        zlc_mark_zone_full(zonelist, z);

This is intended to prevent rescanning in the near future but the zoneref
cursor does not correspond to the zone that has been found to be full.
This is an easy misunderstanding to make so this patch corrects the
problem by changing zoneref cursor to be the current zone being scanned
instead of the next one.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: <stable@kernel.org>		[2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/mmzone.h | 12 ++++++------
 mm/mmzone.c            |  2 +-
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 443bc7cd8c62..428328a05fa1 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -751,8 +751,9 @@ static inline int zonelist_node_idx(struct zoneref *zoneref)
  *
  * This function returns the next zone at or below a given zone index that is
  * within the allowed nodemask using a cursor as the starting point for the
- * search. The zoneref returned is a cursor that is used as the next starting
- * point for future calls to next_zones_zonelist().
+ * search. The zoneref returned is a cursor that represents the current zone
+ * being examined. It should be advanced by one before calling
+ * next_zones_zonelist again.
  */
 struct zoneref *next_zones_zonelist(struct zoneref *z,
 					enum zone_type highest_zoneidx,
@@ -768,9 +769,8 @@ struct zoneref *next_zones_zonelist(struct zoneref *z,
  *
  * This function returns the first zone at or below a given zone index that is
  * within the allowed nodemask. The zoneref returned is a cursor that can be
- * used to iterate the zonelist with next_zones_zonelist. The cursor should
- * not be used by the caller as it does not match the value of the zone
- * returned.
+ * used to iterate the zonelist with next_zones_zonelist by advancing it by
+ * one before calling.
  */
 static inline struct zoneref *first_zones_zonelist(struct zonelist *zonelist,
 					enum zone_type highest_zoneidx,
@@ -795,7 +795,7 @@ static inline struct zoneref *first_zones_zonelist(struct zonelist *zonelist,
 #define for_each_zone_zonelist_nodemask(zone, z, zlist, highidx, nodemask) \
 	for (z = first_zones_zonelist(zlist, highidx, nodemask, &zone);	\
 		zone;							\
-		z = next_zones_zonelist(z, highidx, nodemask, &zone))	\
+		z = next_zones_zonelist(++z, highidx, nodemask, &zone))	\
 
 /**
  * for_each_zone_zonelist - helper macro to iterate over valid zones in a zonelist at or below a given zone index
diff --git a/mm/mmzone.c b/mm/mmzone.c
index 486ed595ee6f..16ce8b955dcf 100644
--- a/mm/mmzone.c
+++ b/mm/mmzone.c
@@ -69,6 +69,6 @@ struct zoneref *next_zones_zonelist(struct zoneref *z,
 				(z->zone && !zref_in_nodemask(z, nodes)))
 			z++;
 
-	*zone = zonelist_zone(z++);
+	*zone = zonelist_zone(z);
 	return z;
 }
-- 
cgit v1.2.3


From 9f986a8cdf94a5855201cf67db6ffdf926bc4cd9 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Sat, 13 Sep 2008 02:33:20 -0700
Subject: Documentation/ABI: /sys/class/gpio

Provide summary ABI docs about the /sys/class/gpio files.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/ABI/testing/sysfs-gpio | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-gpio

diff --git a/Documentation/ABI/testing/sysfs-gpio b/Documentation/ABI/testing/sysfs-gpio
new file mode 100644
index 000000000000..8aab8092ad35
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-gpio
@@ -0,0 +1,26 @@
+What:		/sys/class/gpio/
+Date:		July 2008
+KernelVersion:	2.6.27
+Contact:	David Brownell <dbrownell@users.sourceforge.net>
+Description:
+
+  As a Kconfig option, individual GPIO signals may be accessed from
+  userspace.  GPIOs are only made available to userspace by an explicit
+  "export" operation.  If a given GPIO is not claimed for use by
+  kernel code, it may be exported by userspace (and unexported later).
+  Kernel code may export it for complete or partial access.
+
+  GPIOs are identified as they are inside the kernel, using integers in
+  the range 0..INT_MAX.  See Documentation/gpio.txt for more information.
+
+    /sys/class/gpio
+	/export ... asks the kernel to export a GPIO to userspace
+	/unexport ... to return a GPIO to the kernel
+	/gpioN ... for each exported GPIO #N
+	    /value ... always readable, writes fail for input GPIOs
+	    /direction ... r/w as: in, out (default low); write: high, low
+	/gpiochipN ... for each gpiochip; #N is its first GPIO
+	    /base ... (r/o) same as N
+	    /label ... (r/o) descriptive, not necessarily unique
+	    /ngpio ... (r/o) number of GPIOs; numbered N to N + (ngpio - 1)
+
-- 
cgit v1.2.3


From ecc9a04de66e7b2d40d539cc39d5798bc46553e9 Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Sat, 13 Sep 2008 02:33:21 -0700
Subject: MAINTAINERS: fix USB VIDEO CLASS mail list address

It should be linux-uvc-devel@lists.berlios.de.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 186be3ba5069..0a613cb926c6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4365,7 +4365,7 @@ S:	Maintained
 USB VIDEO CLASS
 P:	Laurent Pinchart
 M:	laurent.pinchart@skynet.be
-L:	linx-uvc-devel@berlios.de
+L:	linux-uvc-devel@lists.berlios.de
 L:	video4linux-list@redhat.com
 W:	http://linux-uvc.berlios.de
 S:	Maintained
-- 
cgit v1.2.3


From 8275d102f8dbaa4f437f6b03b00d85bfb4e16025 Mon Sep 17 00:00:00 2001
From: Robin Holt <holt@sgi.com>
Date: Sat, 13 Sep 2008 02:33:22 -0700
Subject: ia64: fix panic during `modprobe -r xpc'

If you are on ia64 and you modprobe xpc then modprobe -r xpc, you
immediately get a panic.  xpc depends on xp which depends on gru for a
symbol.  That symbol is only used when we are running on UV hardware.

Currently, the GRU driver detects we are not on UV hardware and does no
initializing.  It does not do the same check when unloading.  As a result,
the gru driver attempts to tear down stuff that was not setup.

This is a simple two-line workaround to get us through this release.  Once
2.6.28 is opened, we need to rework the symbols that xp is depending on
from gru so the gru driver can properly fail to load when hardware is not
available.

Signed-off-by: Robin Holt <holt@sgi.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/sgi-gru/grufile.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
index 23c91f5f6b61..d61cee796efd 100644
--- a/drivers/misc/sgi-gru/grufile.c
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -445,6 +445,9 @@ static void __exit gru_exit(void)
 	int order = get_order(sizeof(struct gru_state) *
 			      GRU_CHIPLETS_PER_BLADE);
 
+	if (!IS_UV())
+		return;
+
 	for (i = 0; i < GRU_CHIPLETS_PER_BLADE; i++)
 		free_irq(IRQ_GRU + i, NULL);
 
-- 
cgit v1.2.3


From 3aa04f1b07352be89960bddca4db0d5d8c09510c Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Sat, 13 Sep 2008 02:33:23 -0700
Subject: atmel_lcdfb: disable LCD and DMA engines when suspending

When suspending the system with atmel_lcdfb enabled, I sometimes see
this:

	atmel_lcdfb atmel_lcdfb.0: FIFO underflow 0x10

Which can be explained by the fact that we're not stopping the LCD
controller and its DMA engine when suspending, we're just gating the
clocks to them.

There's another potential issue which may be harder to trigger but
much more nasty: If we gate the clocks at _just_ the right moment,
e.g. when the DMA engine is doing a bus transaction, we may cause the
DMA engine to violate the system bus protocol and cause a lockup.

Avoid these issues by shutting down the LCD controller before entering
suspend (and restarting it when resuming). This prevents the underrun
from happening in the first place, and prevents whatever nastiness is
happening when the bus clock stops in the middle of a DMA transfer.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/atmel_lcdfb.c | 84 ++++++++++++++++++++++++++-------------------
 1 file changed, 49 insertions(+), 35 deletions(-)

diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 5a24c6411d34..75dac578104f 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -208,6 +208,36 @@ static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
 	return value;
 }
 
+static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo)
+{
+	/* Turn off the LCD controller and the DMA controller */
+	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+			sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
+
+	/* Wait for the LCDC core to become idle */
+	while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
+		msleep(10);
+
+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+}
+
+static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo)
+{
+	atmel_lcdfb_stop_nowait(sinfo);
+
+	/* Wait for DMA engine to become idle... */
+	while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
+		msleep(10);
+}
+
+static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo)
+{
+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+		(sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET)
+		| ATMEL_LCDC_PWR);
+}
+
 static void atmel_lcdfb_update_dma(struct fb_info *info,
 			       struct fb_var_screeninfo *var)
 {
@@ -420,26 +450,8 @@ static void atmel_lcdfb_reset(struct atmel_lcdfb_info *sinfo)
 {
 	might_sleep();
 
-	/* LCD power off */
-	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-
-	/* wait for the LCDC core to become idle */
-	while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
-		msleep(10);
-
-	/* DMA disable */
-	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
-
-	/* wait for DMA engine to become idle */
-	while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
-		msleep(10);
-
-	/* LCD power on */
-	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
-		(sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
-
-	/* DMA enable */
-	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+	atmel_lcdfb_stop(sinfo);
+	atmel_lcdfb_start(sinfo);
 }
 
 /**
@@ -471,14 +483,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
 		 info->var.xres, info->var.yres,
 		 info->var.xres_virtual, info->var.yres_virtual);
 
-	/* Turn off the LCD controller and the DMA controller */
-	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-
-	/* Wait for the LCDC core to become idle */
-	while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
-		msleep(10);
-
-	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+	atmel_lcdfb_stop_nowait(sinfo);
 
 	if (info->var.bits_per_pixel == 1)
 		info->fix.visual = FB_VISUAL_MONO01;
@@ -583,13 +588,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
 	while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
 		msleep(10);
 
-	dev_dbg(info->device, "  * re-enable DMA engine\n");
-	/* ...and enable it with updated configuration */
-	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
-
-	dev_dbg(info->device, "  * re-enable LCDC core\n");
-	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
-		(sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
+	atmel_lcdfb_start(sinfo);
 
 	dev_dbg(info->device, "  * DONE\n");
 
@@ -1032,11 +1031,20 @@ static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg)
 	struct fb_info *info = platform_get_drvdata(pdev);
 	struct atmel_lcdfb_info *sinfo = info->par;
 
+	/*
+	 * We don't want to handle interrupts while the clock is
+	 * stopped. It may take forever.
+	 */
+	lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
+
 	sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
 	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
 	if (sinfo->atmel_lcdfb_power_control)
 		sinfo->atmel_lcdfb_power_control(0);
+
+	atmel_lcdfb_stop(sinfo);
 	atmel_lcdfb_stop_clock(sinfo);
+
 	return 0;
 }
 
@@ -1046,9 +1054,15 @@ static int atmel_lcdfb_resume(struct platform_device *pdev)
 	struct atmel_lcdfb_info *sinfo = info->par;
 
 	atmel_lcdfb_start_clock(sinfo);
+	atmel_lcdfb_start(sinfo);
 	if (sinfo->atmel_lcdfb_power_control)
 		sinfo->atmel_lcdfb_power_control(1);
 	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
+
+	/* Enable FIFO & DMA errors */
+	lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI
+			| ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From 42cde4309b8f2671610be049352df2f8716e8809 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sat, 13 Sep 2008 02:33:24 -0700
Subject: spi_s3c24xx: fix section warning

Fix the section mismatch warning generated by the incorrect naming of
s3c24xx_spidrv which should be s3c24xx_spi_driver:

WARNING: drivers/spi/spi_s3c24xx.o(.data+0x4):
  Section mismatch in reference from the variable s3c24xx_spidrv
  to the (unknown reference) .exit.text:(unknown)

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/spi/spi_s3c24xx.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index 98abc73c1a1d..3eb414b84a9d 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -430,7 +430,7 @@ static int s3c24xx_spi_resume(struct platform_device *pdev)
 #endif
 
 MODULE_ALIAS("platform:s3c2410-spi");
-static struct platform_driver s3c24xx_spidrv = {
+static struct platform_driver s3c24xx_spi_driver = {
 	.remove		= __exit_p(s3c24xx_spi_remove),
 	.suspend	= s3c24xx_spi_suspend,
 	.resume		= s3c24xx_spi_resume,
@@ -442,12 +442,12 @@ static struct platform_driver s3c24xx_spidrv = {
 
 static int __init s3c24xx_spi_init(void)
 {
-        return platform_driver_probe(&s3c24xx_spidrv, s3c24xx_spi_probe);
+        return platform_driver_probe(&s3c24xx_spi_driver, s3c24xx_spi_probe);
 }
 
 static void __exit s3c24xx_spi_exit(void)
 {
-        platform_driver_unregister(&s3c24xx_spidrv);
+        platform_driver_unregister(&s3c24xx_spi_driver);
 }
 
 module_init(s3c24xx_spi_init);
-- 
cgit v1.2.3


From 8d99f83b9478768d3a8d7d1bcd9bd182c75a0447 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Sat, 13 Sep 2008 02:33:25 -0700
Subject: rescan_partitions(): make device capacity errors non-fatal

Herton Krzesinski reports that the error-checking changes in
04ebd4aee52b06a2c38127d9208546e5b96f3a19 ("block/ioctl.c and
fs/partition/check.c: check value returned by add_partition") cause his
buggy USB camera to no longer mount.  "The camera is an Olympus X-840.
The original issue comes from the camera itself: its format program
creates a partition with an off by one error".

Buggy devices happen.  It is better for the kernel to warn and to proceed
with the mount.

Reported-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Cc: Abdel Benamrouche <draconux@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/partitions/check.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index 7d6b34e201db..ecc3330972e5 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -499,9 +499,9 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev)
 		if (!size)
 			continue;
 		if (from + size > get_capacity(disk)) {
-			printk(KERN_ERR " %s: p%d exceeds device capacity\n",
+			printk(KERN_WARNING
+				"%s: p%d exceeds device capacity\n",
 				disk->disk_name, p);
-			continue;
 		}
 		res = add_partition(disk, p, from, size, state->parts[p].flags);
 		if (res) {
-- 
cgit v1.2.3


From 8e82f8c34b1759ae0d80fe96101746ec51fb1ba4 Mon Sep 17 00:00:00 2001
From: Alex Dubov <oakad@yahoo.com>
Date: Sat, 13 Sep 2008 02:33:26 -0700
Subject: memstick: fix MSProHG 8-bit interface mode support

- 8-bit interface mode never worked properly.  The only adapter I have
  which supports the 8b mode (the Jmicron) had some problems with its
  clock wiring and they discovered it only now.  We also discovered that
  ProHG media is more sensitive to the ordering of initialization
  commands.

- Make the driver fall back to highest supported mode instead of always
  falling back to serial.  The driver will attempt the switch to 8b mode
  for any new MSPro card, but not all of them support it.  Previously,
  these new cards ended up in serial mode, which is not the best idea
  (they work fine with 4b, after all).

- Edit some macros for better conformance to Sony documentation

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/memstick/core/memstick.c    | 10 ++--
 drivers/memstick/core/mspro_block.c | 33 ++++++++++---
 drivers/memstick/host/jmb38x_ms.c   | 39 ++++++++++-----
 include/linux/memstick.h            | 97 +++++++++++++++++++------------------
 4 files changed, 106 insertions(+), 73 deletions(-)

diff --git a/drivers/memstick/core/memstick.c b/drivers/memstick/core/memstick.c
index a38005008a20..cea46906408e 100644
--- a/drivers/memstick/core/memstick.c
+++ b/drivers/memstick/core/memstick.c
@@ -185,7 +185,7 @@ static void memstick_free(struct device *dev)
 }
 
 static struct class memstick_host_class = {
-	.name       = "memstick_host",
+	.name        = "memstick_host",
 	.dev_release = memstick_free
 };
 
@@ -264,7 +264,7 @@ EXPORT_SYMBOL(memstick_new_req);
  * @sg - TPC argument
  */
 void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc,
-			  struct scatterlist *sg)
+			  const struct scatterlist *sg)
 {
 	mrq->tpc = tpc;
 	if (tpc & 8)
@@ -294,7 +294,7 @@ EXPORT_SYMBOL(memstick_init_req_sg);
  * user supplied buffer.
  */
 void memstick_init_req(struct memstick_request *mrq, unsigned char tpc,
-		       void *buf, size_t length)
+		       const void *buf, size_t length)
 {
 	mrq->tpc = tpc;
 	if (tpc & 8)
@@ -439,7 +439,7 @@ static void memstick_check(struct work_struct *work)
 	if (!host->card) {
 		if (memstick_power_on(host))
 			goto out_power_off;
-	} else
+	} else if (host->card->stop)
 		host->card->stop(host->card);
 
 	card = memstick_alloc_card(host);
@@ -458,7 +458,7 @@ static void memstick_check(struct work_struct *work)
 			    || !(host->card->check(host->card))) {
 				device_unregister(&host->card->dev);
 				host->card = NULL;
-			} else
+			} else if (host->card->start)
 				host->card->start(host->card);
 		}
 
diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c
index 44b1817f2f2f..d2d2318dafa4 100644
--- a/drivers/memstick/core/mspro_block.c
+++ b/drivers/memstick/core/mspro_block.c
@@ -30,6 +30,8 @@ module_param(major, int, 0644);
 #define MSPRO_BLOCK_SIGNATURE        0xa5c3
 #define MSPRO_BLOCK_MAX_ATTRIBUTES   41
 
+#define MSPRO_BLOCK_PART_SHIFT 3
+
 enum {
 	MSPRO_BLOCK_ID_SYSINFO         = 0x10,
 	MSPRO_BLOCK_ID_MODELNAME       = 0x15,
@@ -195,7 +197,7 @@ static int mspro_block_bd_open(struct inode *inode, struct file *filp)
 static int mspro_block_disk_release(struct gendisk *disk)
 {
 	struct mspro_block_data *msb = disk->private_data;
-	int disk_id = disk->first_minor >> MEMSTICK_PART_SHIFT;
+	int disk_id = disk->first_minor >> MSPRO_BLOCK_PART_SHIFT;
 
 	mutex_lock(&mspro_block_disk_lock);
 
@@ -877,6 +879,7 @@ static int mspro_block_switch_interface(struct memstick_dev *card)
 	struct mspro_block_data *msb = memstick_get_drvdata(card);
 	int rc = 0;
 
+try_again:
 	if (msb->caps & MEMSTICK_CAP_PAR4)
 		rc = mspro_block_set_interface(card, MEMSTICK_SYS_PAR4);
 	else
@@ -930,6 +933,18 @@ static int mspro_block_switch_interface(struct memstick_dev *card)
 		rc = memstick_set_rw_addr(card);
 		if (!rc)
 			rc = mspro_block_set_interface(card, msb->system);
+
+		if (!rc) {
+			msleep(150);
+			rc = mspro_block_wait_for_ced(card);
+			if (rc)
+				return rc;
+
+			if (msb->caps & MEMSTICK_CAP_PAR8) {
+				msb->caps &= ~MEMSTICK_CAP_PAR8;
+				goto try_again;
+			}
+		}
 	}
 	return rc;
 }
@@ -1117,14 +1132,16 @@ static int mspro_block_init_card(struct memstick_dev *card)
 		return -EIO;
 
 	msb->caps = host->caps;
-	rc = mspro_block_switch_interface(card);
+
+	msleep(150);
+	rc = mspro_block_wait_for_ced(card);
 	if (rc)
 		return rc;
 
-	msleep(200);
-	rc = mspro_block_wait_for_ced(card);
+	rc = mspro_block_switch_interface(card);
 	if (rc)
 		return rc;
+
 	dev_dbg(&card->dev, "card activated\n");
 	if (msb->system != MEMSTICK_SYS_SERIAL)
 		msb->caps |= MEMSTICK_CAP_AUTO_GET_INT;
@@ -1192,12 +1209,12 @@ static int mspro_block_init_disk(struct memstick_dev *card)
 	if (rc)
 		return rc;
 
-	if ((disk_id << MEMSTICK_PART_SHIFT) > 255) {
+	if ((disk_id << MSPRO_BLOCK_PART_SHIFT) > 255) {
 		rc = -ENOSPC;
 		goto out_release_id;
 	}
 
-	msb->disk = alloc_disk(1 << MEMSTICK_PART_SHIFT);
+	msb->disk = alloc_disk(1 << MSPRO_BLOCK_PART_SHIFT);
 	if (!msb->disk) {
 		rc = -ENOMEM;
 		goto out_release_id;
@@ -1220,7 +1237,7 @@ static int mspro_block_init_disk(struct memstick_dev *card)
 				   MSPRO_BLOCK_MAX_PAGES * msb->page_size);
 
 	msb->disk->major = major;
-	msb->disk->first_minor = disk_id << MEMSTICK_PART_SHIFT;
+	msb->disk->first_minor = disk_id << MSPRO_BLOCK_PART_SHIFT;
 	msb->disk->fops = &ms_block_bdops;
 	msb->usage_count = 1;
 	msb->disk->private_data = msb;
@@ -1416,7 +1433,7 @@ out_unlock:
 
 static struct memstick_device_id mspro_block_id_tbl[] = {
 	{MEMSTICK_MATCH_ALL, MEMSTICK_TYPE_PRO, MEMSTICK_CATEGORY_STORAGE_DUO,
-	 MEMSTICK_CLASS_GENERIC_DUO},
+	 MEMSTICK_CLASS_DUO},
 	{}
 };
 
diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c
index 3485c63d20b0..2fb95a5b72eb 100644
--- a/drivers/memstick/host/jmb38x_ms.c
+++ b/drivers/memstick/host/jmb38x_ms.c
@@ -81,6 +81,8 @@ struct jmb38x_ms {
 #define TPC_CODE_SZ_MASK       0x00000700
 #define TPC_DATA_SZ_MASK       0x00000007
 
+#define HOST_CONTROL_TDELAY_EN 0x00040000
+#define HOST_CONTROL_HW_OC_P   0x00010000
 #define HOST_CONTROL_RESET_REQ 0x00008000
 #define HOST_CONTROL_REI       0x00004000
 #define HOST_CONTROL_LED       0x00000400
@@ -88,6 +90,7 @@ struct jmb38x_ms {
 #define HOST_CONTROL_RESET     0x00000100
 #define HOST_CONTROL_POWER_EN  0x00000080
 #define HOST_CONTROL_CLOCK_EN  0x00000040
+#define HOST_CONTROL_REO       0x00000008
 #define HOST_CONTROL_IF_SHIFT  4
 
 #define HOST_CONTROL_IF_SERIAL 0x0
@@ -133,11 +136,15 @@ struct jmb38x_ms {
 #define PAD_PU_PD_ON_MS_SOCK1 0x0f0f0000
 
 #define CLOCK_CONTROL_40MHZ   0x00000001
-#define CLOCK_CONTROL_50MHZ   0x00000002
+#define CLOCK_CONTROL_50MHZ   0x0000000a
 #define CLOCK_CONTROL_60MHZ   0x00000008
 #define CLOCK_CONTROL_62_5MHZ 0x0000000c
 #define CLOCK_CONTROL_OFF     0x00000000
 
+#define PCI_CTL_CLOCK_DLY_ADDR   0x000000b0
+#define PCI_CTL_CLOCK_DLY_MASK_A 0x00000f00
+#define PCI_CTL_CLOCK_DLY_MASK_B 0x0000f000
+
 enum {
 	CMD_READY    = 0x01,
 	FIFO_READY   = 0x02,
@@ -367,8 +374,7 @@ static int jmb38x_ms_issue_cmd(struct memstick_host *msh)
 		return host->req->error;
 	}
 
-	dev_dbg(&msh->dev, "control %08x\n",
-		readl(host->addr + HOST_CONTROL));
+	dev_dbg(&msh->dev, "control %08x\n", readl(host->addr + HOST_CONTROL));
 	dev_dbg(&msh->dev, "status %08x\n", readl(host->addr + INT_STATUS));
 	dev_dbg(&msh->dev, "hstatus %08x\n", readl(host->addr + STATUS));
 
@@ -637,7 +643,7 @@ static int jmb38x_ms_reset(struct jmb38x_ms_host *host)
 		ndelay(20);
 	}
 	dev_dbg(&host->chip->pdev->dev, "reset_req timeout\n");
-	return -EIO;
+	/* return -EIO; */
 
 reset_next:
 	writel(HOST_CONTROL_RESET | HOST_CONTROL_CLOCK_EN
@@ -680,7 +686,9 @@ static int jmb38x_ms_set_param(struct memstick_host *msh,
 
 			host_ctl = 7;
 			host_ctl |= HOST_CONTROL_POWER_EN
-				 | HOST_CONTROL_CLOCK_EN;
+				    | HOST_CONTROL_CLOCK_EN
+				    | HOST_CONTROL_HW_OC_P
+				    | HOST_CONTROL_TDELAY_EN;
 			writel(host_ctl, host->addr + HOST_CONTROL);
 
 			writel(host->id ? PAD_PU_PD_ON_MS_SOCK1
@@ -704,33 +712,40 @@ static int jmb38x_ms_set_param(struct memstick_host *msh,
 		break;
 	case MEMSTICK_INTERFACE:
 		host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT);
+		pci_read_config_dword(host->chip->pdev,
+				      PCI_CTL_CLOCK_DLY_ADDR,
+				      &clock_delay);
+		clock_delay &= host->id ? ~PCI_CTL_CLOCK_DLY_MASK_B
+					: ~PCI_CTL_CLOCK_DLY_MASK_A;
 
 		if (value == MEMSTICK_SERIAL) {
 			host_ctl &= ~HOST_CONTROL_FAST_CLK;
+			host_ctl &= ~HOST_CONTROL_REO;
 			host_ctl |= HOST_CONTROL_IF_SERIAL
 				    << HOST_CONTROL_IF_SHIFT;
 			host_ctl |= HOST_CONTROL_REI;
 			clock_ctl = CLOCK_CONTROL_40MHZ;
-			clock_delay = 0;
 		} else if (value == MEMSTICK_PAR4) {
-			host_ctl |= HOST_CONTROL_FAST_CLK;
+			host_ctl |= HOST_CONTROL_FAST_CLK | HOST_CONTROL_REO;
 			host_ctl |= HOST_CONTROL_IF_PAR4
 				    << HOST_CONTROL_IF_SHIFT;
 			host_ctl &= ~HOST_CONTROL_REI;
 			clock_ctl = CLOCK_CONTROL_40MHZ;
-			clock_delay = 4;
+			clock_delay |= host->id ? (4 << 12) : (4 << 8);
 		} else if (value == MEMSTICK_PAR8) {
 			host_ctl |= HOST_CONTROL_FAST_CLK;
 			host_ctl |= HOST_CONTROL_IF_PAR8
 				    << HOST_CONTROL_IF_SHIFT;
-			host_ctl &= ~HOST_CONTROL_REI;
-			clock_ctl = CLOCK_CONTROL_60MHZ;
-			clock_delay = 0;
+			host_ctl &= ~(HOST_CONTROL_REI | HOST_CONTROL_REO);
+			clock_ctl = CLOCK_CONTROL_50MHZ;
 		} else
 			return -EINVAL;
+
 		writel(host_ctl, host->addr + HOST_CONTROL);
 		writel(clock_ctl, host->addr + CLOCK_CONTROL);
-		writel(clock_delay, host->addr + CLOCK_DELAY);
+		pci_write_config_dword(host->chip->pdev,
+				       PCI_CTL_CLOCK_DLY_ADDR,
+				       clock_delay);
 		break;
 	};
 	return 0;
diff --git a/include/linux/memstick.h b/include/linux/memstick.h
index a9f998a3f48b..d0c37e682234 100644
--- a/include/linux/memstick.h
+++ b/include/linux/memstick.h
@@ -21,30 +21,30 @@
 struct ms_status_register {
 	unsigned char reserved;
 	unsigned char interrupt;
-#define MEMSTICK_INT_CMDNAK             0x0001
-#define MEMSTICK_INT_IOREQ              0x0008
-#define MEMSTICK_INT_IOBREQ             0x0010
-#define MEMSTICK_INT_BREQ               0x0020
-#define MEMSTICK_INT_ERR                0x0040
-#define MEMSTICK_INT_CED                0x0080
+#define MEMSTICK_INT_CMDNAK 0x01
+#define MEMSTICK_INT_IOREQ  0x08
+#define MEMSTICK_INT_IOBREQ 0x10
+#define MEMSTICK_INT_BREQ   0x20
+#define MEMSTICK_INT_ERR    0x40
+#define MEMSTICK_INT_CED    0x80
 
 	unsigned char status0;
-#define MEMSTICK_STATUS0_WP             0x0001
-#define MEMSTICK_STATUS0_SL             0x0002
-#define MEMSTICK_STATUS0_BF             0x0010
-#define MEMSTICK_STATUS0_BE             0x0020
-#define MEMSTICK_STATUS0_FB0            0x0040
-#define MEMSTICK_STATUS0_MB             0x0080
+#define MEMSTICK_STATUS0_WP  0x01
+#define MEMSTICK_STATUS0_SL  0x02
+#define MEMSTICK_STATUS0_BF  0x10
+#define MEMSTICK_STATUS0_BE  0x20
+#define MEMSTICK_STATUS0_FB0 0x40
+#define MEMSTICK_STATUS0_MB  0x80
 
 	unsigned char status1;
-#define MEMSTICK_STATUS1_UCFG           0x0001
-#define MEMSTICK_STATUS1_FGER           0x0002
-#define MEMSTICK_STATUS1_UCEX           0x0004
-#define MEMSTICK_STATUS1_EXER           0x0008
-#define MEMSTICK_STATUS1_UCDT           0x0010
-#define MEMSTICK_STATUS1_DTER           0x0020
-#define MEMSTICK_STATUS1_FBI            0x0040
-#define MEMSTICK_STATUS1_MB             0x0080
+#define MEMSTICK_STATUS1_UCFG 0x01
+#define MEMSTICK_STATUS1_FGER 0x02
+#define MEMSTICK_STATUS1_UCEX 0x04
+#define MEMSTICK_STATUS1_EXER 0x08
+#define MEMSTICK_STATUS1_UCDT 0x10
+#define MEMSTICK_STATUS1_DTER 0x20
+#define MEMSTICK_STATUS1_FB1  0x40
+#define MEMSTICK_STATUS1_MB   0x80
 } __attribute__((packed));
 
 struct ms_id_register {
@@ -56,32 +56,32 @@ struct ms_id_register {
 
 struct ms_param_register {
 	unsigned char system;
-#define MEMSTICK_SYS_ATEN 0xc0
-#define MEMSTICK_SYS_BAMD 0x80
 #define MEMSTICK_SYS_PAM  0x08
+#define MEMSTICK_SYS_BAMD 0x80
 
 	unsigned char block_address_msb;
 	unsigned short block_address;
 	unsigned char cp;
-#define MEMSTICK_CP_BLOCK               0x0000
-#define MEMSTICK_CP_PAGE                0x0020
-#define MEMSTICK_CP_EXTRA               0x0040
-#define MEMSTICK_CP_OVERWRITE           0x0080
+#define MEMSTICK_CP_BLOCK     0x00
+#define MEMSTICK_CP_PAGE      0x20
+#define MEMSTICK_CP_EXTRA     0x40
+#define MEMSTICK_CP_OVERWRITE 0x80
 
 	unsigned char page_address;
 } __attribute__((packed));
 
 struct ms_extra_data_register {
 	unsigned char  overwrite_flag;
-#define MEMSTICK_OVERWRITE_UPDATA       0x0010
-#define MEMSTICK_OVERWRITE_PAGE         0x0060
-#define MEMSTICK_OVERWRITE_BLOCK        0x0080
+#define MEMSTICK_OVERWRITE_UDST  0x10
+#define MEMSTICK_OVERWRITE_PGST1 0x20
+#define MEMSTICK_OVERWRITE_PGST0 0x40
+#define MEMSTICK_OVERWRITE_BKST  0x80
 
 	unsigned char  management_flag;
-#define MEMSTICK_MANAGEMENT_SYSTEM      0x0004
-#define MEMSTICK_MANAGEMENT_TRANS_TABLE 0x0008
-#define MEMSTICK_MANAGEMENT_COPY        0x0010
-#define MEMSTICK_MANAGEMENT_ACCESS      0x0020
+#define MEMSTICK_MANAGEMENT_SYSFLG 0x04
+#define MEMSTICK_MANAGEMENT_ATFLG  0x08
+#define MEMSTICK_MANAGEMENT_SCMS1  0x10
+#define MEMSTICK_MANAGEMENT_SCMS0  0x20
 
 	unsigned short logical_address;
 } __attribute__((packed));
@@ -96,9 +96,9 @@ struct ms_register {
 
 struct mspro_param_register {
 	unsigned char  system;
-#define MEMSTICK_SYS_SERIAL 0x80
 #define MEMSTICK_SYS_PAR4   0x00
 #define MEMSTICK_SYS_PAR8   0x40
+#define MEMSTICK_SYS_SERIAL 0x80
 
 	unsigned short data_count;
 	unsigned int   data_address;
@@ -147,7 +147,7 @@ struct ms_register_addr {
 	unsigned char w_length;
 } __attribute__((packed));
 
-enum {
+enum memstick_tpc {
 	MS_TPC_READ_MG_STATUS   = 0x01,
 	MS_TPC_READ_LONG_DATA   = 0x02,
 	MS_TPC_READ_SHORT_DATA  = 0x03,
@@ -167,7 +167,7 @@ enum {
 	MS_TPC_SET_CMD          = 0x0e
 };
 
-enum {
+enum memstick_command {
 	MS_CMD_BLOCK_END       = 0x33,
 	MS_CMD_RESET           = 0x3c,
 	MS_CMD_BLOCK_WRITE     = 0x55,
@@ -201,8 +201,6 @@ enum {
 
 /*** Driver structures and functions ***/
 
-#define MEMSTICK_PART_SHIFT 3
-
 enum memstick_param { MEMSTICK_POWER = 1, MEMSTICK_INTERFACE };
 
 #define MEMSTICK_POWER_OFF 0
@@ -215,24 +213,27 @@ enum memstick_param { MEMSTICK_POWER = 1, MEMSTICK_INTERFACE };
 struct memstick_host;
 struct memstick_driver;
 
+struct memstick_device_id {
+	unsigned char match_flags;
 #define MEMSTICK_MATCH_ALL            0x01
 
+	unsigned char type;
 #define MEMSTICK_TYPE_LEGACY          0xff
 #define MEMSTICK_TYPE_DUO             0x00
 #define MEMSTICK_TYPE_PRO             0x01
 
+	unsigned char category;
 #define MEMSTICK_CATEGORY_STORAGE     0xff
 #define MEMSTICK_CATEGORY_STORAGE_DUO 0x00
+#define MEMSTICK_CATEGORY_IO          0x01
+#define MEMSTICK_CATEGORY_IO_PRO      0x10
 
-#define MEMSTICK_CLASS_GENERIC        0xff
-#define MEMSTICK_CLASS_GENERIC_DUO    0x00
-
-
-struct memstick_device_id {
-	unsigned char match_flags;
-	unsigned char type;
-	unsigned char category;
 	unsigned char class;
+#define MEMSTICK_CLASS_FLASH          0xff
+#define MEMSTICK_CLASS_DUO            0x00
+#define MEMSTICK_CLASS_ROM            0x01
+#define MEMSTICK_CLASS_RO             0x02
+#define MEMSTICK_CLASS_WP             0x03
 };
 
 struct memstick_request {
@@ -319,9 +320,9 @@ void memstick_suspend_host(struct memstick_host *host);
 void memstick_resume_host(struct memstick_host *host);
 
 void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc,
-			  struct scatterlist *sg);
+			  const struct scatterlist *sg);
 void memstick_init_req(struct memstick_request *mrq, unsigned char tpc,
-		       void *buf, size_t length);
+		       const void *buf, size_t length);
 int memstick_next_req(struct memstick_host *host,
 		      struct memstick_request **mrq);
 void memstick_new_req(struct memstick_host *host);
-- 
cgit v1.2.3


From 212387055902b65f79463d1934033255aa6b99e1 Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Date: Sat, 13 Sep 2008 22:29:31 +0200
Subject: Add Uwe Kleine-König to .mailmap
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

There are a few commits that misencoded my name (or used "oe" instead of
"ö").  So add a correct version to .mailmap.

Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 .mailmap | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/.mailmap b/.mailmap
index 726084286d33..dfab12f809ed 100644
--- a/.mailmap
+++ b/.mailmap
@@ -96,4 +96,6 @@ Tejun Heo <htejun@gmail.com>
 Thomas Graf <tgraf@suug.ch>
 Tony Luck <tony.luck@intel.com>
 Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
+Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
+Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
-- 
cgit v1.2.3


From 5670a43d710a12fcbbfaefd3991002768b488d82 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Sun, 14 Sep 2008 07:42:23 -0700
Subject: xen: fix for xen guest with mem > 3.7G

PFN_PHYS() can truncate large addresses unless its passed a suitable
large type.  This is fixed more generally in the patch series
introducing phys_addr_t, but we need a short-term fix to solve a
Xen regression reported by Roberto De Ioris.

Reported-by: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/xen/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index b6acc3a0af46..d67901083888 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -42,7 +42,7 @@ char * __init xen_memory_setup(void)
 
 	e820.nr_map = 0;
 
-	e820_add_region(0, PFN_PHYS(max_pfn), E820_RAM);
+	e820_add_region(0, PFN_PHYS((u64)max_pfn), E820_RAM);
 
 	/*
 	 * Even though this is normal, usable memory under Xen, reserve
-- 
cgit v1.2.3


From 5132895f14a57607152f7865dc862fb076ce2585 Mon Sep 17 00:00:00 2001
From: Alex Nixon <alex.nixon@citrix.com>
Date: Wed, 3 Sep 2008 14:36:40 +0100
Subject: x86/paravirt: Remove duplicate paravirt_pagetable_setup_{start,
 done}()

They were already called once in arch/x86/kernel/setup.c - we don't need to call them again.

fixes:

  http://bugzilla.kernel.org/show_bug.cgi?id=11485

Signed-off-by: Alex Nixon <alex.nixon@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/init_32.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index d37f29376b0c..60ec1d08ff24 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -458,11 +458,7 @@ static void __init pagetable_init(void)
 {
 	pgd_t *pgd_base = swapper_pg_dir;
 
-	paravirt_pagetable_setup_start(pgd_base);
-
 	permanent_kmaps_init(pgd_base);
-
-	paravirt_pagetable_setup_done(pgd_base);
 }
 
 #ifdef CONFIG_ACPI_SLEEP
-- 
cgit v1.2.3


From ba95487df97f9c45cfdae2a47de56235e7a13dc5 Mon Sep 17 00:00:00 2001
From: Kim Phillips <kim.phillips@freescale.com>
Date: Sun, 14 Sep 2008 13:41:19 -0700
Subject: crypto: talitos - Avoid consecutive packets going out with same IV

The SEC's h/w IV out implementation DMAs the trailing encrypted payload
block of the last encryption to ctx->iv.  Since the last encryption may
still be pending completion, we can sufficiently prevent successive
packets from being transmitted with the same IV by xoring with sequence
number.

Also initialize alg_list earlier to prevent oopsing on a failed probe.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 drivers/crypto/talitos.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index ee827a7f7c6a..b6ad3ac5916e 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -1157,6 +1157,8 @@ static int aead_authenc_givencrypt(
 	edesc->desc.hdr = ctx->desc_hdr_template | DESC_HDR_MODE0_ENCRYPT;
 
 	memcpy(req->giv, ctx->iv, crypto_aead_ivsize(authenc));
+	/* avoid consecutive packets going out with same IV */
+	*(__be64 *)req->giv ^= cpu_to_be64(req->seq);
 
 	return ipsec_esp(edesc, areq, req->giv, req->seq,
 			 ipsec_esp_encrypt_done);
@@ -1449,6 +1451,8 @@ static int talitos_probe(struct of_device *ofdev,
 
 	priv->ofdev = ofdev;
 
+	INIT_LIST_HEAD(&priv->alg_list);
+
 	tasklet_init(&priv->done_task, talitos_done, (unsigned long)dev);
 	tasklet_init(&priv->error_task, talitos_error, (unsigned long)dev);
 
@@ -1575,8 +1579,6 @@ static int talitos_probe(struct of_device *ofdev,
 	}
 
 	/* register crypto algorithms the device supports */
-	INIT_LIST_HEAD(&priv->alg_list);
-
 	for (i = 0; i < ARRAY_SIZE(driver_algs); i++) {
 		if (hw_supports(dev, driver_algs[i].desc_hdr_template)) {
 			struct talitos_crypto_alg *t_alg;
-- 
cgit v1.2.3


From 02b71b70129aaaa38f280af2aa5a767a4dec9107 Mon Sep 17 00:00:00 2001
From: Salman Qazi <sqazi@google.com>
Date: Thu, 11 Sep 2008 12:25:41 -0700
Subject: slub: fixed uninitialized counter in struct kmem_cache_node

Initialized total objects atomic for the node in init_kmem_cache_node.  The
uninitialized value was ruining the stats in /proc/slabinfo.

Acked-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Salman Qazi <sqazi@google.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
---
 mm/slub.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/mm/slub.c b/mm/slub.c
index fb486d5540f8..0c83e6afe7b2 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1932,6 +1932,7 @@ init_kmem_cache_node(struct kmem_cache_node *n, struct kmem_cache *s)
 	INIT_LIST_HEAD(&n->partial);
 #ifdef CONFIG_SLUB_DEBUG
 	atomic_long_set(&n->nr_slabs, 0);
+	atomic_long_set(&n->total_objects, 0);
 	INIT_LIST_HEAD(&n->full);
 #endif
 }
-- 
cgit v1.2.3


From 93821778def10ec1e69aa3ac10adee975dad4ff3 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Mon, 15 Sep 2008 11:48:46 -0700
Subject: udp: Fix rcv socket locking

The previous patch in response to the recursive locking on IPsec
reception is broken as it tries to drop the BH socket lock while in
user context.

This patch fixes it by shrinking the section protected by the
socket lock to sock_queue_rcv_skb only.  The only reason we added
the lock is for the accounting which happens in that function.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/udp.c | 62 +++++++++++++++++++++++++++++++---------------------------
 1 file changed, 33 insertions(+), 29 deletions(-)

diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 8e42fbbd5761..57e26fa66185 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -951,6 +951,27 @@ int udp_disconnect(struct sock *sk, int flags)
 	return 0;
 }
 
+static int __udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
+{
+	int is_udplite = IS_UDPLITE(sk);
+	int rc;
+
+	if ((rc = sock_queue_rcv_skb(sk, skb)) < 0) {
+		/* Note that an ENOMEM error is charged twice */
+		if (rc == -ENOMEM)
+			UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_RCVBUFERRORS,
+					 is_udplite);
+		goto drop;
+	}
+
+	return 0;
+
+drop:
+	UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS, is_udplite);
+	kfree_skb(skb);
+	return -1;
+}
+
 /* returns:
  *  -1: error
  *   0: success
@@ -989,9 +1010,7 @@ int udp_queue_rcv_skb(struct sock * sk, struct sk_buff *skb)
 		    up->encap_rcv != NULL) {
 			int ret;
 
-			bh_unlock_sock(sk);
 			ret = (*up->encap_rcv)(sk, skb);
-			bh_lock_sock(sk);
 			if (ret <= 0) {
 				UDP_INC_STATS_BH(sock_net(sk),
 						 UDP_MIB_INDATAGRAMS,
@@ -1044,17 +1063,16 @@ int udp_queue_rcv_skb(struct sock * sk, struct sk_buff *skb)
 			goto drop;
 	}
 
-	if ((rc = sock_queue_rcv_skb(sk,skb)) < 0) {
-		/* Note that an ENOMEM error is charged twice */
-		if (rc == -ENOMEM) {
-			UDP_INC_STATS_BH(sock_net(sk),
-					UDP_MIB_RCVBUFERRORS, is_udplite);
-			atomic_inc(&sk->sk_drops);
-		}
-		goto drop;
-	}
+	rc = 0;
 
-	return 0;
+	bh_lock_sock(sk);
+	if (!sock_owned_by_user(sk))
+		rc = __udp_queue_rcv_skb(sk, skb);
+	else
+		sk_add_backlog(sk, skb);
+	bh_unlock_sock(sk);
+
+	return rc;
 
 drop:
 	UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS, is_udplite);
@@ -1092,15 +1110,7 @@ static int __udp4_lib_mcast_deliver(struct net *net, struct sk_buff *skb,
 				skb1 = skb_clone(skb, GFP_ATOMIC);
 
 			if (skb1) {
-				int ret = 0;
-
-				bh_lock_sock(sk);
-				if (!sock_owned_by_user(sk))
-					ret = udp_queue_rcv_skb(sk, skb1);
-				else
-					sk_add_backlog(sk, skb1);
-				bh_unlock_sock(sk);
-
+				int ret = udp_queue_rcv_skb(sk, skb1);
 				if (ret > 0)
 					/* we should probably re-process instead
 					 * of dropping packets here. */
@@ -1195,13 +1205,7 @@ int __udp4_lib_rcv(struct sk_buff *skb, struct hlist_head udptable[],
 			uh->dest, inet_iif(skb), udptable);
 
 	if (sk != NULL) {
-		int ret = 0;
-		bh_lock_sock(sk);
-		if (!sock_owned_by_user(sk))
-			ret = udp_queue_rcv_skb(sk, skb);
-		else
-			sk_add_backlog(sk, skb);
-		bh_unlock_sock(sk);
+		int ret = udp_queue_rcv_skb(sk, skb);
 		sock_put(sk);
 
 		/* a return value > 0 means to resubmit the input, but
@@ -1494,7 +1498,7 @@ struct proto udp_prot = {
 	.sendmsg	   = udp_sendmsg,
 	.recvmsg	   = udp_recvmsg,
 	.sendpage	   = udp_sendpage,
-	.backlog_rcv	   = udp_queue_rcv_skb,
+	.backlog_rcv	   = __udp_queue_rcv_skb,
 	.hash		   = udp_lib_hash,
 	.unhash		   = udp_lib_unhash,
 	.get_port	   = udp_v4_get_port,
-- 
cgit v1.2.3


From 29bdc88384c2b24e37e5760df0dc898546083d6b Mon Sep 17 00:00:00 2001
From: Vladimir Sokolovsky <vlad@mellanox.co.il>
Date: Mon, 15 Sep 2008 14:25:23 -0700
Subject: IB/mlx4: Fix up fast register page list format

Byte swap the addresses in the page list for fast register work requests
to big endian to match what the HCA expectx.  Also, the addresses must
have the "present" bit set so that the HCA knows it can access them.
Otherwise the HCA will fault the first time it accesses the memory
region.

Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/mlx4/qp.c | 6 ++++++
 drivers/net/mlx4/mr.c           | 2 --
 include/linux/mlx4/device.h     | 4 ++++
 3 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index f29dbb767e87..9559248f265b 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -1342,6 +1342,12 @@ static __be32 convert_access(int acc)
 static void set_fmr_seg(struct mlx4_wqe_fmr_seg *fseg, struct ib_send_wr *wr)
 {
 	struct mlx4_ib_fast_reg_page_list *mfrpl = to_mfrpl(wr->wr.fast_reg.page_list);
+	int i;
+
+	for (i = 0; i < wr->wr.fast_reg.page_list_len; ++i)
+		wr->wr.fast_reg.page_list->page_list[i] =
+			cpu_to_be64(wr->wr.fast_reg.page_list->page_list[i] |
+				    MLX4_MTT_FLAG_PRESENT);
 
 	fseg->flags		= convert_access(wr->wr.fast_reg.access_flags);
 	fseg->mem_key		= cpu_to_be32(wr->wr.fast_reg.rkey);
diff --git a/drivers/net/mlx4/mr.c b/drivers/net/mlx4/mr.c
index 644adf074a35..d1dd5b48dbd1 100644
--- a/drivers/net/mlx4/mr.c
+++ b/drivers/net/mlx4/mr.c
@@ -71,8 +71,6 @@ struct mlx4_mpt_entry {
 #define MLX4_MPT_PD_FLAG_RAE	    (1 << 28)
 #define MLX4_MPT_PD_FLAG_EN_INV	    (3 << 24)
 
-#define MLX4_MTT_FLAG_PRESENT		1
-
 #define MLX4_MPT_STATUS_SW		0xF0
 #define MLX4_MPT_STATUS_HW		0x00
 
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index 655ea0d1ee14..b2f944468313 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -141,6 +141,10 @@ enum {
 	MLX4_STAT_RATE_OFFSET	= 5
 };
 
+enum {
+	MLX4_MTT_FLAG_PRESENT		= 1
+};
+
 static inline u64 mlx4_fw_ver(u64 major, u64 minor, u64 subminor)
 {
 	return (major << 32) | (minor << 16) | subminor;
-- 
cgit v1.2.3


From a83479545d0e693da0886fd28d041d3a5c1bc966 Mon Sep 17 00:00:00 2001
From: roel kluin <roel.kluin@gmail.com>
Date: Mon, 15 Sep 2008 20:50:54 -0400
Subject: [MIPS] VR41xx: unsigned irq cannot be negative

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/vr41xx/common/irq.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c
index cba36a247e32..92dd1a0ca352 100644
--- a/arch/mips/vr41xx/common/irq.c
+++ b/arch/mips/vr41xx/common/irq.c
@@ -72,6 +72,7 @@ static void irq_dispatch(unsigned int irq)
 	cascade = irq_cascade + irq;
 	if (cascade->get_irq != NULL) {
 		unsigned int source_irq = irq;
+		int ret;
 		desc = irq_desc + source_irq;
 		if (desc->chip->mask_ack)
 			desc->chip->mask_ack(source_irq);
@@ -79,8 +80,9 @@ static void irq_dispatch(unsigned int irq)
 			desc->chip->mask(source_irq);
 			desc->chip->ack(source_irq);
 		}
-		irq = cascade->get_irq(irq);
-		if (irq < 0)
+		ret = cascade->get_irq(irq);
+		irq = ret;
+		if (ret < 0)
 			atomic_inc(&irq_err_count);
 		else
 			irq_dispatch(irq);
-- 
cgit v1.2.3


From e1f4f59d1ab9ebac44830d6ae450fb358ac559d3 Mon Sep 17 00:00:00 2001
From: Sitsofe Wheeler <sitsofe@yahoo.com>
Date: Tue, 16 Sep 2008 14:27:13 +0100
Subject: PCI: Fix pcie_aspm=force

pcie_aspm=force did not work because aspm_force was being double negated
leading to the sanity check failing. Moving a bracket should fix this.

Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/pcie/aspm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 9a7c9e1408a4..851f5b83cdbc 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -527,7 +527,7 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev)
 		 */
 		pci_read_config_dword(child_dev, child_pos + PCI_EXP_DEVCAP,
 			&reg32);
-		if (!(reg32 & PCI_EXP_DEVCAP_RBER && !aspm_force)) {
+		if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) {
 			printk("Pre-1.1 PCIe device detected, "
 				"disable ASPM for %s. It can be enabled forcedly"
 				" with 'pcie_aspm=force'\n", pci_name(pdev));
-- 
cgit v1.2.3


From cd72ad3f57c400baa2ddb78b4fc2781cf68ffb6f Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@euromail.se>
Date: Sun, 14 Sep 2008 11:52:44 -0400
Subject: Input: bcm5974 - switch back to normal mode when closing

Staying in multi-touch mode after closing the device sometimes makes
the keyboard drop keys or repeat keys irratically. The conjecture is
that some internal buffer starts to overflow, resulting in undefined
behavior. Switching back to normal mode when closing the device makes
the problem go away.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/bcm5974.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index 18f4d7f6ce6d..2998a6ac9ae4 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -351,8 +351,9 @@ static int report_tp_state(struct bcm5974 *dev, int size)
 #define BCM5974_WELLSPRING_MODE_REQUEST_VALUE		0x300
 #define BCM5974_WELLSPRING_MODE_REQUEST_INDEX		0
 #define BCM5974_WELLSPRING_MODE_VENDOR_VALUE		0x01
+#define BCM5974_WELLSPRING_MODE_NORMAL_VALUE		0x08
 
-static int bcm5974_wellspring_mode(struct bcm5974 *dev)
+static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
 {
 	char *data = kmalloc(8, GFP_KERNEL);
 	int retval = 0, size;
@@ -377,7 +378,9 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev)
 	}
 
 	/* apply the mode switch */
-	data[0] = BCM5974_WELLSPRING_MODE_VENDOR_VALUE;
+	data[0] = on ?
+		BCM5974_WELLSPRING_MODE_VENDOR_VALUE :
+		BCM5974_WELLSPRING_MODE_NORMAL_VALUE;
 
 	/* write configuration */
 	size = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
@@ -392,7 +395,8 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev)
 		goto out;
 	}
 
-	dprintk(2, "bcm5974: switched to wellspring mode.\n");
+	dprintk(2, "bcm5974: switched to %s mode.\n",
+		on ? "wellspring" : "normal");
 
  out:
 	kfree(data);
@@ -481,7 +485,7 @@ exit:
  */
 static int bcm5974_start_traffic(struct bcm5974 *dev)
 {
-	if (bcm5974_wellspring_mode(dev)) {
+	if (bcm5974_wellspring_mode(dev, true)) {
 		dprintk(1, "bcm5974: mode switch failed\n");
 		goto error;
 	}
@@ -504,6 +508,7 @@ static void bcm5974_pause_traffic(struct bcm5974 *dev)
 {
 	usb_kill_urb(dev->tp_urb);
 	usb_kill_urb(dev->bt_urb);
+	bcm5974_wellspring_mode(dev, false);
 }
 
 /*
-- 
cgit v1.2.3


From ba0593bf553c450a03dbc5f8c1f0ff58b778a0c8 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Tue, 16 Sep 2008 09:29:40 -0700
Subject: x86: completely disable NOPL on 32 bits

Completely disable NOPL on 32 bits.  It turns out that Microsoft
Virtual PC is so broken it can't even reliably *fail* in the presence
of NOPL.

This leaves the infrastructure in place but disables it
unconditionally.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/common.c | 24 ++++--------------------
 1 file changed, 4 insertions(+), 20 deletions(-)

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 8aab8517642e..4e456bd955bb 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -344,31 +344,15 @@ static void __init early_cpu_detect(void)
 
 /*
  * The NOPL instruction is supposed to exist on all CPUs with
- * family >= 6, unfortunately, that's not true in practice because
+ * family >= 6; unfortunately, that's not true in practice because
  * of early VIA chips and (more importantly) broken virtualizers that
- * are not easy to detect.  Hence, probe for it based on first
- * principles.
+ * are not easy to detect.  In the latter case it doesn't even *fail*
+ * reliably, so probing for it doesn't even work.  Disable it completely
+ * unless we can find a reliable way to detect all the broken cases.
  */
 static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
 {
-	const u32 nopl_signature = 0x888c53b1; /* Random number */
-	u32 has_nopl = nopl_signature;
-
 	clear_cpu_cap(c, X86_FEATURE_NOPL);
-	if (c->x86 >= 6) {
-		asm volatile("\n"
-			     "1:      .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
-			     "2:\n"
-			     "        .section .fixup,\"ax\"\n"
-			     "3:      xor %0,%0\n"
-			     "        jmp 2b\n"
-			     "        .previous\n"
-			     _ASM_EXTABLE(1b,3b)
-			     : "+a" (has_nopl));
-
-		if (has_nopl == nopl_signature)
-			set_cpu_cap(c, X86_FEATURE_NOPL);
-	}
 }
 
 static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
-- 
cgit v1.2.3


From f26fd5d6e5006eae75a389c7ce74ed16761d094b Mon Sep 17 00:00:00 2001
From: Cornelia Huck <cornelia.huck@de.ibm.com>
Date: Tue, 16 Sep 2008 09:32:18 -0700
Subject: [S390] cio: Fix driver_data handling for ccwgroup devices.

Since 16f7f9564c3ae190954f2ec55f385a268b93ac4d, we've seen
oopses when grouping/ungrouping devices:

Unable to handle kernel pointer dereference at virtual kernel address 0000000000
114000
Oops: 0004 [#1] PREEMPT SMP
Modules linked in: bonding qeth_l2 dm_multipath sunrpc qeth_l3 dm_mod qeth chsc_
sch ccwgroup
CPU: 1 Not tainted 2.6.26-29.x.20080815-s390xdefault #1
Process iperf (pid: 24412, task: 000000003f446038, ksp: 000000003c929e08)
Krnl PSW : 0404d00180000000 000003e00006f6e6 (qeth_irq+0xda/0xb28 [qeth])
           R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 EA:3
Krnl GPRS: 0000000000000000 000003e000000003 0000000000000000 0000000000114ccc
           000000003fb82e48 000003e00006f60c 000000000000000c 000000003ce72100
           0000000000114944 000000003fb82e48 0000000000114ccc 000000003fe8fd28
           000003e000066000 000003e000076128 000000003fe8fdb8 000000003fe8fd28
Krnl Code: 000003e00006f6da: bf3f2024            icm     %r3,15,36(%r2)
           000003e00006f6de: a774023c            brc     7,3e00006fb56
           000003e00006f6e2: a7280000            lhi     %r2,0
          >000003e00006f6e6: 5020a1a0            st      %r2,416(%r10)
           000003e00006f6ea: 58109000            l       %r1,0(%r9)
           000003e00006f6ee: a7111000            tmll    %r1,4096
           000003e00006f6f2: a77400f9            brc     7,3e00006f8e4
           000003e00006f6f6: 8810000c            srl     %r1,12
Call Trace:
([<000000003fe8fd20>] 0x3fe8fd20)
 [<000000000033bf2a>] ccw_device_call_handler+0xb2/0xd8
 [<0000000000339e1c>] ccw_device_irq+0x124/0x164
 [<0000000000339758>] io_subchannel_irq+0x8c/0x118
 [<00000000003309ba>] do_IRQ+0x192/0x1bc
 [<0000000000114f66>] io_return+0x0/0x8
 [<00000000001149cc>] sysc_do_svc+0x0/0x22
([<0000000000114a18>] sysc_noemu+0x10/0x16)
 [<00000200002e047c>] 0x200002e047c
Last Breaking-Event-Address:
 [<000003e00006f6d6>] qeth_irq+0xca/0xb28 [qeth]

The problem is that dev->driver_data for a ccw device is NULL,
while it should point to the ccwgroup device it is a member of.
This happened due to incorrect cleanup if creating a ccwgroup
device failed because the ccw devices were already grouped.

Fix this by setting cdev[i] to NULL in the error handling of
ccwgroup_create_from_string() after we give up our reference and
by checking if the driver_data points to the ccwgroup device in
ccwgroup_release() just to be really sure.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/cio/ccwgroup.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c
index e0ce65fca4e7..9a50f245774b 100644
--- a/drivers/s390/cio/ccwgroup.c
+++ b/drivers/s390/cio/ccwgroup.c
@@ -113,7 +113,8 @@ ccwgroup_release (struct device *dev)
 
 	for (i = 0; i < gdev->count; i++) {
 		if (gdev->cdev[i]) {
-			dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
+			if (dev_get_drvdata(&gdev->cdev[i]->dev) == gdev)
+				dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
 			put_device(&gdev->cdev[i]->dev);
 		}
 	}
@@ -296,6 +297,7 @@ error:
 			if (dev_get_drvdata(&gdev->cdev[i]->dev) == gdev)
 				dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
 			put_device(&gdev->cdev[i]->dev);
+			gdev->cdev[i] = NULL;
 		}
 	mutex_unlock(&gdev->reg_mutex);
 	put_device(&gdev->dev);
-- 
cgit v1.2.3


From 9adb8c1d4f0ac78b3469e377ce5f8a846cbaedaf Mon Sep 17 00:00:00 2001
From: Stefan Weinhuber <wein@de.ibm.com>
Date: Tue, 16 Sep 2008 09:32:19 -0700
Subject: [S390] cio: fix orb initialization in cio_start_key

The functions cio_tm_start_key and cio_start_key use the same private
orb structure of a subchannel, so the orb needs to be cleared of old
data before it is used again. A respective memset is missing from
cio_start_key and hereby added.

Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/cio/cio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index 5954b905e3ca..326f4cc7f92c 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -174,6 +174,7 @@ cio_start_key (struct subchannel *sch,	/* subchannel structure */
 	CIO_TRACE_EVENT(4, sch->dev.bus_id);
 
 	orb = &to_io_private(sch)->orb;
+	memset(orb, 0, sizeof(union orb));
 	/* sch is always under 2G. */
 	orb->cmd.intparm = (u32)(addr_t)sch;
 	orb->cmd.fmt = 1;
-- 
cgit v1.2.3


From f948cc6ab9e61a8e88d70ee9aafc690e6d26f92c Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 16 Sep 2008 09:53:42 -0700
Subject: sparc64: Fix OOPS in psycho_pcierr_intr_other().

We no longer put the top-level PCI controller device into the
PCI layer device list.  So pbm->pci_bus->self is always NULL.

Therefore, use direct PCI config space accesses to get at
the PCI controller's PCI_STATUS register.

Tested by Meelis Roos.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc64/kernel/pci_psycho.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c
index e205ade69cfc..f85b6bebb0be 100644
--- a/arch/sparc64/kernel/pci_psycho.c
+++ b/arch/sparc64/kernel/pci_psycho.c
@@ -575,7 +575,7 @@ static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm, int is_pbm
 {
 	unsigned long csr_reg, csr, csr_error_bits;
 	irqreturn_t ret = IRQ_NONE;
-	u16 stat;
+	u16 stat, *addr;
 
 	if (is_pbm_a) {
 		csr_reg = pbm->controller_regs + PSYCHO_PCIA_CTRL;
@@ -597,7 +597,9 @@ static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm, int is_pbm
 			printk("%s: PCI SERR signal asserted.\n", pbm->name);
 		ret = IRQ_HANDLED;
 	}
-	pci_read_config_word(pbm->pci_bus->self, PCI_STATUS, &stat);
+	addr = psycho_pci_config_mkaddr(pbm, pbm->pci_first_busno,
+					0, PCI_STATUS);
+	pci_config_read16(addr, &stat);
 	if (stat & (PCI_STATUS_PARITY |
 		    PCI_STATUS_SIG_TARGET_ABORT |
 		    PCI_STATUS_REC_TARGET_ABORT |
@@ -605,7 +607,7 @@ static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm, int is_pbm
 		    PCI_STATUS_SIG_SYSTEM_ERROR)) {
 		printk("%s: PCI bus error, PCI_STATUS[%04x]\n",
 		       pbm->name, stat);
-		pci_write_config_word(pbm->pci_bus->self, PCI_STATUS, 0xffff);
+		pci_config_write16(addr, 0xffff);
 		ret = IRQ_HANDLED;
 	}
 	return ret;
-- 
cgit v1.2.3


From 1577e4b70a04cce39f296cc714da5ad5d272105a Mon Sep 17 00:00:00 2001
From: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Date: Tue, 16 Sep 2008 14:19:25 -0400
Subject: Input: jornada720_ts - fix build error ( LONG() usage )

This patch removes the usage of LONG() which is deprecated; we also
replace BIT() with BIT_MASK().

signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/jornada720_ts.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c
index 1aca108b1031..b7f1260738a6 100644
--- a/drivers/input/touchscreen/jornada720_ts.c
+++ b/drivers/input/touchscreen/jornada720_ts.c
@@ -119,8 +119,8 @@ static int __devinit jornada720_ts_probe(struct platform_device *pdev)
 	input_dev->id.bustype = BUS_HOST;
 	input_dev->dev.parent = &pdev->dev;
 
-	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-	input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
 	input_set_abs_params(input_dev, ABS_X, 270, 3900, 0, 0);
 	input_set_abs_params(input_dev, ABS_Y, 180, 3700, 0, 0);
 
-- 
cgit v1.2.3


From 9843099ff46467461d6476a827f6f9701682dbac Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 16 Sep 2008 11:44:00 -0700
Subject: sparc64: Fix SMP bootup with CONFIG_STACK_DEBUG or ftrace.

Based upon a report by Meelis Roos.

Any function call can try to access the current
thread register via the _mcount hooks when the kernel
is built with -pg (via ftrace or STACK_DEBUG).

That can't be setup properly very early on during
the bootup of other cpus for sun4u and some early
sun4v systems.

So add notrace markers to these specific functions, so
that _mcount doesn't get invoked too early.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc64/kernel/irq.c   | 5 +++--
 arch/sparc64/kernel/traps.c | 3 ++-
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c
index 23963882bc18..7495bc774685 100644
--- a/arch/sparc64/kernel/irq.c
+++ b/arch/sparc64/kernel/irq.c
@@ -7,6 +7,7 @@
 
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/linkage.h>
 #include <linux/ptrace.h>
 #include <linux/errno.h>
 #include <linux/kernel_stat.h>
@@ -866,7 +867,7 @@ static void kill_prom_timer(void)
 	: "g1", "g2");
 }
 
-void init_irqwork_curcpu(void)
+void notrace init_irqwork_curcpu(void)
 {
 	int cpu = hard_smp_processor_id();
 
@@ -897,7 +898,7 @@ static void __cpuinit register_one_mondo(unsigned long paddr, unsigned long type
 	}
 }
 
-void __cpuinit sun4v_register_mondo_queues(int this_cpu)
+void __cpuinit notrace sun4v_register_mondo_queues(int this_cpu)
 {
 	struct trap_per_cpu *tb = &trap_block[this_cpu];
 
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index 3d924121c796..c824df13f589 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -10,6 +10,7 @@
 
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/linkage.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/smp.h>
@@ -2453,7 +2454,7 @@ struct trap_per_cpu trap_block[NR_CPUS];
 /* This can get invoked before sched_init() so play it super safe
  * and use hard_smp_processor_id().
  */
-void init_cur_cpu_trap(struct thread_info *t)
+void notrace init_cur_cpu_trap(struct thread_info *t)
 {
 	int cpu = hard_smp_processor_id();
 	struct trap_per_cpu *p = &trap_block[cpu];
-- 
cgit v1.2.3


From d7ffd5076d4407d54b25bc4b25f3002f74fbafde Mon Sep 17 00:00:00 2001
From: Faisal Latif <flatif@neteffect.com>
Date: Tue, 16 Sep 2008 11:56:26 -0700
Subject: RDMA/nes: Fix client side QP destroy

Fix QP not being destroyed properly on the client, which leads to
userspace programs hanging on exit.  This is a missing chunk from the
connection management rewrite in commit 6492cdf3 ("RDMA/nes: CM
connection setup/teardown rework").

Signed-off-by: Faisal Latif <flatif@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes_cm.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 9f0b964b2c99..499d3cf83e1f 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -1956,13 +1956,6 @@ static int mini_cm_reject(struct nes_cm_core *cm_core,
 		return ret;
 	cleanup_retrans_entry(cm_node);
 	cm_node->state = NES_CM_STATE_CLOSED;
-	ret = send_fin(cm_node, NULL);
-
-	if (cm_node->accept_pend) {
-		BUG_ON(!cm_node->listener);
-		atomic_dec(&cm_node->listener->pend_accepts_cnt);
-		BUG_ON(atomic_read(&cm_node->listener->pend_accepts_cnt) < 0);
-	}
 
 	ret = send_reset(cm_node, NULL);
 	return ret;
@@ -2383,6 +2376,7 @@ static int nes_cm_disconn_true(struct nes_qp *nesqp)
 			atomic_inc(&cm_disconnects);
 			cm_event.event = IW_CM_EVENT_DISCONNECT;
 			if (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET) {
+				issued_disconnect_reset = 1;
 				cm_event.status = IW_CM_EVENT_STATUS_RESET;
 				nes_debug(NES_DBG_CM, "Generating a CM "
 					"Disconnect Event (status reset) for "
@@ -2508,7 +2502,6 @@ static int nes_disconnect(struct nes_qp *nesqp, int abrupt)
 		nes_debug(NES_DBG_CM, "Call close API\n");
 
 		g_cm_core->api->close(g_cm_core, nesqp->cm_node);
-		nesqp->cm_node = NULL;
 	}
 
 	return ret;
@@ -2837,6 +2830,7 @@ int nes_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 	cm_node->apbvt_set = 1;
 	nesqp->cm_node = cm_node;
 	cm_node->nesqp = nesqp;
+	nes_add_ref(&nesqp->ibqp);
 
 	return 0;
 }
@@ -3167,7 +3161,6 @@ static void cm_event_connect_error(struct nes_cm_event *event)
 	if (ret)
 		printk(KERN_ERR "%s[%u] OFA CM event_handler returned, "
 			"ret=%d\n", __func__, __LINE__, ret);
-	nes_rem_ref(&nesqp->ibqp);
 	cm_id->rem_ref(cm_id);
 
 	rem_ref_cm_node(event->cm_node->cm_core, event->cm_node);
-- 
cgit v1.2.3


From e8224e4b804b4fd26723191c1891101a5959bb8a Mon Sep 17 00:00:00 2001
From: Yossi Etigin <yossi.openib@gmail.com>
Date: Tue, 16 Sep 2008 11:57:45 -0700
Subject: IPoIB: Fix deadlock on RTNL between bcast join comp and ipoib_stop()

Taking rtnl_lock in ipoib_mcast_join_complete() causes a deadlock with
ipoib_stop().  We avoid it by scheduling the piece of code that takes
the lock on ipoib_workqueue instead of executing it directly.  This
works because we only flush the ipoib_workqueue with the RTNL not held.

The deadlock happens because ipoib_stop() calls ipoib_ib_dev_down()
which calls ipoib_mcast_dev_flush(), which calls ipoib_mcast_free(),
which calls ipoib_mcast_leave(). The latter calls
ib_sa_free_multicast(), and this waits until the multicast completion
handler finishes.  This handler is ipoib_mcast_join_complete(), which
waits for the rtnl_lock(), which was already taken by ipoib_stop().

This bug was introduced in commit a77a57a1 ("IPoIB: Fix deadlock on
RTNL in ipoib_stop()").

Signed-off-by: Yossi Etigin <yosefe@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/ulp/ipoib/ipoib.h           |  2 ++
 drivers/infiniband/ulp/ipoib/ipoib_main.c      |  1 +
 drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 31 +++++++++++++++++---------
 3 files changed, 24 insertions(+), 10 deletions(-)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h
index b0ffc9abe8c0..05eb41b8ab63 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib.h
+++ b/drivers/infiniband/ulp/ipoib/ipoib.h
@@ -293,6 +293,7 @@ struct ipoib_dev_priv {
 
 	struct delayed_work pkey_poll_task;
 	struct delayed_work mcast_task;
+	struct work_struct carrier_on_task;
 	struct work_struct flush_light;
 	struct work_struct flush_normal;
 	struct work_struct flush_heavy;
@@ -464,6 +465,7 @@ int ipoib_dev_init(struct net_device *dev, struct ib_device *ca, int port);
 void ipoib_dev_cleanup(struct net_device *dev);
 
 void ipoib_mcast_join_task(struct work_struct *work);
+void ipoib_mcast_carrier_on_task(struct work_struct *work);
 void ipoib_mcast_send(struct net_device *dev, void *mgid, struct sk_buff *skb);
 
 void ipoib_mcast_restart_task(struct work_struct *work);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 7e9e218738fa..1b1df5cc4113 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -1075,6 +1075,7 @@ static void ipoib_setup(struct net_device *dev)
 
 	INIT_DELAYED_WORK(&priv->pkey_poll_task, ipoib_pkey_poll);
 	INIT_DELAYED_WORK(&priv->mcast_task,   ipoib_mcast_join_task);
+	INIT_WORK(&priv->carrier_on_task, ipoib_mcast_carrier_on_task);
 	INIT_WORK(&priv->flush_light,   ipoib_ib_dev_flush_light);
 	INIT_WORK(&priv->flush_normal,   ipoib_ib_dev_flush_normal);
 	INIT_WORK(&priv->flush_heavy,   ipoib_ib_dev_flush_heavy);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index ac33c8f3ea85..aae28620a6e5 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -366,6 +366,21 @@ static int ipoib_mcast_sendonly_join(struct ipoib_mcast *mcast)
 	return ret;
 }
 
+void ipoib_mcast_carrier_on_task(struct work_struct *work)
+{
+	struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv,
+						   carrier_on_task);
+
+	/*
+	 * Take rtnl_lock to avoid racing with ipoib_stop() and
+	 * turning the carrier back on while a device is being
+	 * removed.
+	 */
+	rtnl_lock();
+	netif_carrier_on(priv->dev);
+	rtnl_unlock();
+}
+
 static int ipoib_mcast_join_complete(int status,
 				     struct ib_sa_multicast *multicast)
 {
@@ -392,16 +407,12 @@ static int ipoib_mcast_join_complete(int status,
 					   &priv->mcast_task, 0);
 		mutex_unlock(&mcast_mutex);
 
-		if (mcast == priv->broadcast) {
-			/*
-			 * Take RTNL lock here to avoid racing with
-			 * ipoib_stop() and turning the carrier back
-			 * on while a device is being removed.
-			 */
-			rtnl_lock();
-			netif_carrier_on(dev);
-			rtnl_unlock();
-		}
+		/*
+		 * Defer carrier on work to ipoib_workqueue to avoid a
+		 * deadlock on rtnl_lock here.
+		 */
+		if (mcast == priv->broadcast)
+			queue_work(ipoib_workqueue, &priv->carrier_on_task);
 
 		return 0;
 	}
-- 
cgit v1.2.3


From 2344abbcbdb82140050e8be29d3d55e4f6fe860b Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue, 16 Sep 2008 11:32:50 -0700
Subject: clockevents: make device shutdown robust

The device shut down does not cleanup the next_event variable of the
clock event device. So when the device is reactivated the possible
stale next_event value can prevent the device to be reprogrammed as it
claims to wait on a event already.

This is the root cause of the resurfacing suspend/resume problem,
where systems need key press to come back to life.

Fix this by setting next_event to KTIME_MAX when the device is shut
down. Use a separate function for shutdown which takes care of that
and only keep the direct set mode call in the broadcast code, where we
can not touch the next_event value.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 kernel/time/clockevents.c    | 12 +++++++++++-
 kernel/time/tick-broadcast.c |  9 ++++-----
 kernel/time/tick-common.c    |  4 ++--
 kernel/time/tick-internal.h  |  2 ++
 4 files changed, 19 insertions(+), 8 deletions(-)

diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index 1876b526c778..f8d968063cea 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -71,6 +71,16 @@ void clockevents_set_mode(struct clock_event_device *dev,
 	}
 }
 
+/**
+ * clockevents_shutdown - shutdown the device and clear next_event
+ * @dev:	device to shutdown
+ */
+void clockevents_shutdown(struct clock_event_device *dev)
+{
+	clockevents_set_mode(dev, CLOCK_EVT_MODE_SHUTDOWN);
+	dev->next_event.tv64 = KTIME_MAX;
+}
+
 /**
  * clockevents_program_event - Reprogram the clock event device.
  * @expires:	absolute expiry time (monotonic clock)
@@ -206,7 +216,7 @@ void clockevents_exchange_device(struct clock_event_device *old,
 
 	if (new) {
 		BUG_ON(new->mode != CLOCK_EVT_MODE_UNUSED);
-		clockevents_set_mode(new, CLOCK_EVT_MODE_SHUTDOWN);
+		clockevents_shutdown(new);
 	}
 	local_irq_restore(flags);
 }
diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index 2f5a38294bf9..f1f3eee28113 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -236,8 +236,7 @@ static void tick_do_broadcast_on_off(void *why)
 		if (!cpu_isset(cpu, tick_broadcast_mask)) {
 			cpu_set(cpu, tick_broadcast_mask);
 			if (td->mode == TICKDEV_MODE_PERIODIC)
-				clockevents_set_mode(dev,
-						     CLOCK_EVT_MODE_SHUTDOWN);
+				clockevents_shutdown(dev);
 		}
 		if (*reason == CLOCK_EVT_NOTIFY_BROADCAST_FORCE)
 			tick_broadcast_force = 1;
@@ -254,7 +253,7 @@ static void tick_do_broadcast_on_off(void *why)
 
 	if (cpus_empty(tick_broadcast_mask)) {
 		if (!bc_stopped)
-			clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN);
+			clockevents_shutdown(bc);
 	} else if (bc_stopped) {
 		if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC)
 			tick_broadcast_start_periodic(bc);
@@ -306,7 +305,7 @@ void tick_shutdown_broadcast(unsigned int *cpup)
 
 	if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC) {
 		if (bc && cpus_empty(tick_broadcast_mask))
-			clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN);
+			clockevents_shutdown(bc);
 	}
 
 	spin_unlock_irqrestore(&tick_broadcast_lock, flags);
@@ -321,7 +320,7 @@ void tick_suspend_broadcast(void)
 
 	bc = tick_broadcast_device.evtdev;
 	if (bc)
-		clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN);
+		clockevents_shutdown(bc);
 
 	spin_unlock_irqrestore(&tick_broadcast_lock, flags);
 }
diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c
index c4777193d567..019315ebf9de 100644
--- a/kernel/time/tick-common.c
+++ b/kernel/time/tick-common.c
@@ -249,7 +249,7 @@ static int tick_check_new_device(struct clock_event_device *newdev)
 	 * not give it back to the clockevents layer !
 	 */
 	if (tick_is_broadcast_device(curdev)) {
-		clockevents_set_mode(curdev, CLOCK_EVT_MODE_SHUTDOWN);
+		clockevents_shutdown(curdev);
 		curdev = NULL;
 	}
 	clockevents_exchange_device(curdev, newdev);
@@ -311,7 +311,7 @@ static void tick_suspend(void)
 	unsigned long flags;
 
 	spin_lock_irqsave(&tick_device_lock, flags);
-	clockevents_set_mode(td->evtdev, CLOCK_EVT_MODE_SHUTDOWN);
+	clockevents_shutdown(td->evtdev);
 	spin_unlock_irqrestore(&tick_device_lock, flags);
 }
 
diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h
index 0ffc2918ea6f..6e9db9734aa6 100644
--- a/kernel/time/tick-internal.h
+++ b/kernel/time/tick-internal.h
@@ -10,6 +10,8 @@ extern int tick_do_timer_cpu __read_mostly;
 extern void tick_setup_periodic(struct clock_event_device *dev, int broadcast);
 extern void tick_handle_periodic(struct clock_event_device *dev);
 
+extern void clockevents_shutdown(struct clock_event_device *dev);
+
 /*
  * NO_HZ / high resolution timer shared code
  */
-- 
cgit v1.2.3


From 612f9d338a6060f814ef35b7108b43407a5df423 Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Tue, 9 Sep 2008 14:43:39 -0500
Subject: powerpc: Fix interrupt values for DMA2 in MPC8610 HPCD device tree

For Freescale 8xxx devices that use an MPIC, the interrupt numbers in
the device tree must be 16 greater than the values documented in the
reference manual.  In these chips, the MPIC is wired to use the first
16 numbers for external interrupts, but the documentation numbers
internal interrupts from 0.

In the MPC8610 HPCD device tree, the interrupt properties for the DMA
channels for DMA2 were not the adjusted values.  This fixes that.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/boot/dts/mpc8610_hpcd.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 3b3a1062cb25..584a4f184eb2 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -281,7 +281,7 @@
 				cell-index = <0>;
 				reg = <0x0 0x80>;
 				interrupt-parent = <&mpic>;
-				interrupts = <60 2>;
+				interrupts = <76 2>;
 			};
 			dma-channel@1 {
 				compatible = "fsl,mpc8610-dma-channel",
@@ -289,7 +289,7 @@
 				cell-index = <1>;
 				reg = <0x80 0x80>;
 				interrupt-parent = <&mpic>;
-				interrupts = <61 2>;
+				interrupts = <77 2>;
 			};
 			dma-channel@2 {
 				compatible = "fsl,mpc8610-dma-channel",
@@ -297,7 +297,7 @@
 				cell-index = <2>;
 				reg = <0x100 0x80>;
 				interrupt-parent = <&mpic>;
-				interrupts = <62 2>;
+				interrupts = <78 2>;
 			};
 			dma-channel@3 {
 				compatible = "fsl,mpc8610-dma-channel",
@@ -305,7 +305,7 @@
 				cell-index = <3>;
 				reg = <0x180 0x80>;
 				interrupt-parent = <&mpic>;
-				interrupts = <63 2>;
+				interrupts = <79 2>;
 			};
 		};
 
-- 
cgit v1.2.3


From b08508c40adf3fd1330aabc4f37d3254179776c4 Mon Sep 17 00:00:00 2001
From: Greg KH <gregkh@suse.de>
Date: Tue, 26 Aug 2008 08:20:34 -0700
Subject: PCI: fix compiler warnings in pci_get_subsys()

pci_get_subsys() changed in 2.6.26 so that the from pointer is modified
when the call is being invoked, so fix up the 'const' marking of it that
the compiler is complaining about.

Reported-by: Rufus & Azrael <rufus-azrael@numericable.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/search.c | 6 +++---
 include/linux/pci.h  | 8 ++++----
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/search.c b/drivers/pci/search.c
index 3b3b5f178797..4edfc4731bd4 100644
--- a/drivers/pci/search.c
+++ b/drivers/pci/search.c
@@ -162,7 +162,7 @@ EXPORT_SYMBOL(pci_find_slot);
  * time.
  */
 struct pci_dev *pci_find_device(unsigned int vendor, unsigned int device,
-				const struct pci_dev *from)
+				struct pci_dev *from)
 {
 	struct pci_dev *pdev;
 
@@ -263,7 +263,7 @@ static int match_pci_dev_by_id(struct device *dev, void *data)
  * this file.
  */
 static struct pci_dev *pci_get_dev_by_id(const struct pci_device_id *id,
-					 const struct pci_dev *from)
+					 struct pci_dev *from)
 {
 	struct device *dev;
 	struct device *dev_start = NULL;
@@ -303,7 +303,7 @@ static struct pci_dev *pci_get_dev_by_id(const struct pci_device_id *id,
  */
 struct pci_dev *pci_get_subsys(unsigned int vendor, unsigned int device,
 			       unsigned int ss_vendor, unsigned int ss_device,
-			       const struct pci_dev *from)
+			       struct pci_dev *from)
 {
 	struct pci_dev *pdev;
 	struct pci_device_id *id;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index c0e14008a3c2..98dc6243a706 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -534,7 +534,7 @@ extern void pci_sort_breadthfirst(void);
 #ifdef CONFIG_PCI_LEGACY
 struct pci_dev __deprecated *pci_find_device(unsigned int vendor,
 					     unsigned int device,
-					     const struct pci_dev *from);
+					     struct pci_dev *from);
 struct pci_dev __deprecated *pci_find_slot(unsigned int bus,
 					   unsigned int devfn);
 #endif /* CONFIG_PCI_LEGACY */
@@ -550,7 +550,7 @@ struct pci_dev *pci_get_device(unsigned int vendor, unsigned int device,
 				struct pci_dev *from);
 struct pci_dev *pci_get_subsys(unsigned int vendor, unsigned int device,
 				unsigned int ss_vendor, unsigned int ss_device,
-				const struct pci_dev *from);
+				struct pci_dev *from);
 struct pci_dev *pci_get_slot(struct pci_bus *bus, unsigned int devfn);
 struct pci_dev *pci_get_bus_and_slot(unsigned int bus, unsigned int devfn);
 struct pci_dev *pci_get_class(unsigned int class, struct pci_dev *from);
@@ -816,7 +816,7 @@ _PCI_NOP_ALL(write,)
 
 static inline struct pci_dev *pci_find_device(unsigned int vendor,
 					      unsigned int device,
-					      const struct pci_dev *from)
+					      struct pci_dev *from)
 {
 	return NULL;
 }
@@ -838,7 +838,7 @@ static inline struct pci_dev *pci_get_subsys(unsigned int vendor,
 					     unsigned int device,
 					     unsigned int ss_vendor,
 					     unsigned int ss_device,
-					     const struct pci_dev *from)
+					     struct pci_dev *from)
 {
 	return NULL;
 }
-- 
cgit v1.2.3


From e95926d05d028a6bf0ab60b21b484c3d622fdcd1 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue, 16 Sep 2008 19:32:30 -0700
Subject: Revert "b43/b43legacy: add RFKILL_STATE_HARD_BLOCKED support"

This reverts commit bc19d6e0b74ef03a3baf035412c95192b54dfc6f, which as
Larry Finger reports causes the radio LED on his system to no longer
respond to rfkill switch events.

Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Requested-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/net/wireless/b43/rfkill.c       | 18 ------------------
 drivers/net/wireless/b43legacy/rfkill.c | 18 ------------------
 2 files changed, 36 deletions(-)

diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c
index fec5645944a4..34ae125d5384 100644
--- a/drivers/net/wireless/b43/rfkill.c
+++ b/drivers/net/wireless/b43/rfkill.c
@@ -43,23 +43,6 @@ static bool b43_is_hw_radio_enabled(struct b43_wldev *dev)
 	return 0;
 }
 
-/* Update the rfkill state */
-static void b43_rfkill_update_state(struct b43_wldev *dev)
-{
-	struct b43_rfkill *rfk = &(dev->wl->rfkill);
-
-	if (!dev->radio_hw_enable) {
-		rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED;
-		return;
-	}
-
-	if (!dev->phy.radio_on)
-		rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED;
-	else
-		rfk->rfkill->state = RFKILL_STATE_UNBLOCKED;
-
-}
-
 /* The poll callback for the hardware button. */
 static void b43_rfkill_poll(struct input_polled_dev *poll_dev)
 {
@@ -77,7 +60,6 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev)
 	if (unlikely(enabled != dev->radio_hw_enable)) {
 		dev->radio_hw_enable = enabled;
 		report_change = 1;
-		b43_rfkill_update_state(dev);
 		b43info(wl, "Radio hardware status changed to %s\n",
 			enabled ? "ENABLED" : "DISABLED");
 	}
diff --git a/drivers/net/wireless/b43legacy/rfkill.c b/drivers/net/wireless/b43legacy/rfkill.c
index 476add97e974..b32bf6a94f19 100644
--- a/drivers/net/wireless/b43legacy/rfkill.c
+++ b/drivers/net/wireless/b43legacy/rfkill.c
@@ -44,23 +44,6 @@ static bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev)
 	return 0;
 }
 
-/* Update the rfkill state */
-static void b43legacy_rfkill_update_state(struct b43legacy_wldev *dev)
-{
-	struct b43legacy_rfkill *rfk = &(dev->wl->rfkill);
-
-	if (!dev->radio_hw_enable) {
-		rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED;
-		return;
-	}
-
-	if (!dev->phy.radio_on)
-		rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED;
-	else
-		rfk->rfkill->state = RFKILL_STATE_UNBLOCKED;
-
-}
-
 /* The poll callback for the hardware button. */
 static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev)
 {
@@ -78,7 +61,6 @@ static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev)
 	if (unlikely(enabled != dev->radio_hw_enable)) {
 		dev->radio_hw_enable = enabled;
 		report_change = 1;
-		b43legacy_rfkill_update_state(dev);
 		b43legacyinfo(wl, "Radio hardware status changed to %s\n",
 			enabled ? "ENABLED" : "DISABLED");
 	}
-- 
cgit v1.2.3


From 49f276be7ce12d90b6941a000b09e61b68e6c4f2 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <stephen.hemminger@vyatta.com>
Date: Tue, 16 Sep 2008 16:04:12 -0700
Subject: hpplus: fix build regression

This fixes kernel regression for 2.6.27-rc in
      http://bugzilla.kernel.org/show_bug.cgi?id=11547
The change to split 8390 into old isa and non-isa versions
overlooked this driver.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/net/hp-plus.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/hp-plus.c b/drivers/net/hp-plus.c
index 8239939554bc..fbbd3e660c27 100644
--- a/drivers/net/hp-plus.c
+++ b/drivers/net/hp-plus.c
@@ -139,7 +139,7 @@ static int __init do_hpp_probe(struct net_device *dev)
 #ifndef MODULE
 struct net_device * __init hp_plus_probe(int unit)
 {
-	struct net_device *dev = alloc_ei_netdev();
+	struct net_device *dev = alloc_eip_netdev();
 	int err;
 
 	if (!dev)
@@ -284,7 +284,7 @@ hpp_open(struct net_device *dev)
 	int option_reg;
 	int retval;
 
-	if ((retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev))) {
+	if ((retval = request_irq(dev->irq, eip_interrupt, 0, dev->name, dev))) {
 	    return retval;
 	}
 
@@ -302,7 +302,7 @@ hpp_open(struct net_device *dev)
 	/* Select the operational page. */
 	outw(Perf_Page, ioaddr + HP_PAGING);
 
-	ei_open(dev);
+	eip_open(dev);
 	return 0;
 }
 
@@ -313,7 +313,7 @@ hpp_close(struct net_device *dev)
 	int option_reg = inw(ioaddr + HPP_OPTION);
 
 	free_irq(dev->irq, dev);
-	ei_close(dev);
+	eip_close(dev);
 	outw((option_reg & ~EnableIRQ) | MemDisable | NICReset | ChipReset,
 		 ioaddr + HPP_OPTION);
 
-- 
cgit v1.2.3


From ef3d7714f6b75b51825ad0384b5ce48358427e50 Mon Sep 17 00:00:00 2001
From: David Miller <davem@davemloft.net>
Date: Tue, 16 Sep 2008 15:00:11 -0700
Subject: Fix PNP build failure, bugzilla #11276

This fill fix the following regression list entry:

Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=11276
Subject		: build error: CONFIG_OPTIMIZE_INLINING=y causes gcc 4.2 to do stupid things
Submitter	: Randy Dunlap <randy.dunlap@oracle.com>
Date		: 2008-08-06 17:18 (38 days old)
References	: http://marc.info/?l=linux-kernel&m=121804329014332&w=4
		  http://lkml.org/lkml/2008/7/22/353
Handled-By	: Bjorn Helgaas <bjorn.helgaas@hp.com>
Patch		: http://lkml.org/lkml/2008/7/22/364

with what I believe is a better fix than the one referenced
in the regression entry above.

These PNP header interfaces try to work in such a way that
you can reference some of them even if PNP is not enabled,
and the compiler was expected to optimize everything away.

Which is mostly fine, except that there was one interface
for which there was not provided an inline "NOP" implementation.

Once we add that, all of these compile failures cannot handle
any more.

pnp: Provide NOP inline implementation of pnp_get_resource() when !PNP

Fixes kernel bugzilla #11276.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/pnp.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/include/linux/pnp.h b/include/linux/pnp.h
index 1ce54b63085d..be764e514e35 100644
--- a/include/linux/pnp.h
+++ b/include/linux/pnp.h
@@ -21,7 +21,14 @@ struct pnp_dev;
 /*
  * Resource Management
  */
+#ifdef CONFIG_PNP
 struct resource *pnp_get_resource(struct pnp_dev *, unsigned int, unsigned int);
+#else
+static inline struct resource *pnp_get_resource(struct pnp_dev *dev, unsigned int type, unsigned int num)
+{
+	return NULL;
+}
+#endif
 
 static inline int pnp_resource_valid(struct resource *res)
 {
-- 
cgit v1.2.3


From 45e9c0de2e86485f8b6633fd64ab19cfbff167f6 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Mon, 15 Sep 2008 16:43:18 -0700
Subject: warn: Turn the netdev timeout WARN_ON() into a WARN()

this patch turns the netdev timeout WARN_ON_ONCE() into a WARN_ONCE(),
so that the device and driver names are inside the warning message.
This helps automated tools like kerneloops.org to collect the data
and do statistics, as well as making it more likely that humans
cut-n-paste the important message as part of a bugreport.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-generic/bug.h | 10 ++++++++++
 net/sched/sch_generic.c   |  3 +--
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h
index a3f738cffdb6..edc6ba82e090 100644
--- a/include/asm-generic/bug.h
+++ b/include/asm-generic/bug.h
@@ -97,6 +97,16 @@ extern void warn_slowpath(const char *file, const int line,
 	unlikely(__ret_warn_once);				\
 })
 
+#define WARN_ONCE(condition, format...)	({			\
+	static int __warned;					\
+	int __ret_warn_once = !!(condition);			\
+								\
+	if (unlikely(__ret_warn_once))				\
+		if (WARN(!__warned, format)) 			\
+			__warned = 1;				\
+	unlikely(__ret_warn_once);				\
+})
+
 #define WARN_ON_RATELIMIT(condition, state)			\
 		WARN_ON((condition) && __ratelimit(state))
 
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 9634091ee2f0..ec0a0839ce51 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -215,10 +215,9 @@ static void dev_watchdog(unsigned long arg)
 			    time_after(jiffies, (dev->trans_start +
 						 dev->watchdog_timeo))) {
 				char drivername[64];
-				printk(KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit timed out\n",
+				WARN_ONCE(1, KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit timed out\n",
 				       dev->name, netdev_drivername(dev, drivername, 64));
 				dev->tx_timeout(dev);
-				WARN_ON_ONCE(1);
 			}
 			if (!mod_timer(&dev->watchdog_timer,
 				       round_jiffies(jiffies +
-- 
cgit v1.2.3


From 31bd61f2bb79e098117d823e054342b03aa87668 Mon Sep 17 00:00:00 2001
From: Lachlan McIlroy <lachlan@sgi.com>
Date: Wed, 17 Sep 2008 16:45:37 +1000
Subject: [XFS] Move memory allocations for log tracing out of the critical
 path

Memory allocations for log->l_grant_trace and iclog->ic_trace are done on
demand when the first event is logged. In xlog_state_get_iclog_space() we
call xlog_trace_iclog() under a spinlock and allocating memory here can
cause us to sleep with a spinlock held and deadlock the system.

For the log grant tracing we use KM_NOSLEEP but that means we can lose
trace entries. Since there is no locking to serialize the log grant
tracing we could race and have multiple allocations and leak memory.

So move the allocations to where we initialize the log/iclog structures.
Use KM_NOFS to avoid recursing into the filesystem and drop log->l_trace
since it's not even used.

SGI-PV: 983738

SGI-Modid: xfs-linux-melb:xfs-kern:31896a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
---
 fs/xfs/xfs_log.c      | 60 ++++++++++++++++++++++++++++++++++-----------------
 fs/xfs/xfs_log_priv.h |  1 -
 2 files changed, 40 insertions(+), 21 deletions(-)

diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index ccba14eb9dbe..7812bd036e2b 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -124,16 +124,27 @@ STATIC void	xlog_verify_tail_lsn(xlog_t *log, xlog_in_core_t *iclog,
 STATIC int	xlog_iclogs_empty(xlog_t *log);
 
 #if defined(XFS_LOG_TRACE)
+
+#define XLOG_TRACE_LOGGRANT_SIZE	2048
+#define XLOG_TRACE_ICLOG_SIZE		256
+
+void
+xlog_trace_loggrant_alloc(xlog_t *log)
+{
+	log->l_grant_trace = ktrace_alloc(XLOG_TRACE_LOGGRANT_SIZE, KM_NOFS);
+}
+
+void
+xlog_trace_loggrant_dealloc(xlog_t *log)
+{
+	ktrace_free(log->l_grant_trace);
+}
+
 void
 xlog_trace_loggrant(xlog_t *log, xlog_ticket_t *tic, xfs_caddr_t string)
 {
 	unsigned long cnts;
 
-	if (!log->l_grant_trace) {
-		log->l_grant_trace = ktrace_alloc(2048, KM_NOSLEEP);
-		if (!log->l_grant_trace)
-			return;
-	}
 	/* ticket counts are 1 byte each */
 	cnts = ((unsigned long)tic->t_ocnt) | ((unsigned long)tic->t_cnt) << 8;
 
@@ -156,11 +167,21 @@ xlog_trace_loggrant(xlog_t *log, xlog_ticket_t *tic, xfs_caddr_t string)
 		     (void *)((unsigned long)tic->t_unit_res));
 }
 
+void
+xlog_trace_iclog_alloc(xlog_in_core_t *iclog)
+{
+	iclog->ic_trace = ktrace_alloc(XLOG_TRACE_ICLOG_SIZE, KM_NOFS);
+}
+
+void
+xlog_trace_iclog_dealloc(xlog_in_core_t *iclog)
+{
+	ktrace_free(iclog->ic_trace);
+}
+
 void
 xlog_trace_iclog(xlog_in_core_t *iclog, uint state)
 {
-	if (!iclog->ic_trace)
-		iclog->ic_trace = ktrace_alloc(256, KM_NOFS);
 	ktrace_enter(iclog->ic_trace,
 		     (void *)((unsigned long)state),
 		     (void *)((unsigned long)current_pid()),
@@ -170,8 +191,15 @@ xlog_trace_iclog(xlog_in_core_t *iclog, uint state)
 		     (void *)NULL, (void *)NULL);
 }
 #else
+
+#define	xlog_trace_loggrant_alloc(log)
+#define	xlog_trace_loggrant_dealloc(log)
 #define	xlog_trace_loggrant(log,tic,string)
+
+#define	xlog_trace_iclog_alloc(iclog)
+#define	xlog_trace_iclog_dealloc(iclog)
 #define	xlog_trace_iclog(iclog,state)
+
 #endif /* XFS_LOG_TRACE */
 
 
@@ -1231,6 +1259,7 @@ xlog_alloc_log(xfs_mount_t	*mp,
 	spin_lock_init(&log->l_grant_lock);
 	sv_init(&log->l_flush_wait, 0, "flush_wait");
 
+	xlog_trace_loggrant_alloc(log);
 	/* log record size must be multiple of BBSIZE; see xlog_rec_header_t */
 	ASSERT((XFS_BUF_SIZE(bp) & BBMASK) == 0);
 
@@ -1285,6 +1314,8 @@ xlog_alloc_log(xfs_mount_t	*mp,
 		sv_init(&iclog->ic_force_wait, SV_DEFAULT, "iclog-force");
 		sv_init(&iclog->ic_write_wait, SV_DEFAULT, "iclog-write");
 
+		xlog_trace_iclog_alloc(iclog);
+
 		iclogp = &iclog->ic_next;
 	}
 	*iclogp = log->l_iclog;			/* complete ring */
@@ -1565,11 +1596,7 @@ xlog_dealloc_log(xlog_t *log)
 		sv_destroy(&iclog->ic_force_wait);
 		sv_destroy(&iclog->ic_write_wait);
 		xfs_buf_free(iclog->ic_bp);
-#ifdef XFS_LOG_TRACE
-		if (iclog->ic_trace != NULL) {
-			ktrace_free(iclog->ic_trace);
-		}
-#endif
+		xlog_trace_iclog_dealloc(iclog);
 		next_iclog = iclog->ic_next;
 		kmem_free(iclog);
 		iclog = next_iclog;
@@ -1578,14 +1605,7 @@ xlog_dealloc_log(xlog_t *log)
 	spinlock_destroy(&log->l_grant_lock);
 
 	xfs_buf_free(log->l_xbuf);
-#ifdef XFS_LOG_TRACE
-	if (log->l_trace != NULL) {
-		ktrace_free(log->l_trace);
-	}
-	if (log->l_grant_trace != NULL) {
-		ktrace_free(log->l_grant_trace);
-	}
-#endif
+	xlog_trace_loggrant_dealloc(log);
 	log->l_mp->m_log = NULL;
 	kmem_free(log);
 }	/* xlog_dealloc_log */
diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h
index c8a5b22ee3e3..e7d8f84443fa 100644
--- a/fs/xfs/xfs_log_priv.h
+++ b/fs/xfs/xfs_log_priv.h
@@ -448,7 +448,6 @@ typedef struct log {
 	int			l_grant_write_bytes;
 
 #ifdef XFS_LOG_TRACE
-	struct ktrace		*l_trace;
 	struct ktrace		*l_grant_trace;
 #endif
 
-- 
cgit v1.2.3


From 6efdf281777eb07fac28ac2b2d7df1e619ee6da1 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@infradead.org>
Date: Wed, 17 Sep 2008 16:49:33 +1000
Subject: [XFS] Fix regression introduced by remount fixup

Logically we would return an error in xfs_fs_remount code to prevent users
from believing they might have changed mount options using remount which
can't be changed.

But unfortunately mount(8) adds all options from mtab and fstab to the
mount arguments in some cases so we can't blindly reject options, but have
to check for each specified option if it actually differs from the
currently set option and only reject it if that's the case.

Until that is implemented we return success for every remount request, and
silently ignore all options that we can't actually change.

SGI-PV: 985710

SGI-Modid: xfs-linux-melb:xfs-kern:31908a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
---
 fs/xfs/linux-2.6/xfs_super.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 73c65f19e549..18d3c8487835 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -1302,9 +1302,29 @@ xfs_fs_remount(
 			mp->m_flags &= ~XFS_MOUNT_BARRIER;
 			break;
 		default:
+			/*
+			 * Logically we would return an error here to prevent
+			 * users from believing they might have changed
+			 * mount options using remount which can't be changed.
+			 *
+			 * But unfortunately mount(8) adds all options from
+			 * mtab and fstab to the mount arguments in some cases
+			 * so we can't blindly reject options, but have to
+			 * check for each specified option if it actually
+			 * differs from the currently set option and only
+			 * reject it if that's the case.
+			 *
+			 * Until that is implemented we return success for
+			 * every remount request, and silently ignore all
+			 * options that we can't actually change.
+			 */
+#if 0
 			printk(KERN_INFO
 	"XFS: mount option \"%s\" not supported for remount\n", p);
 			return -EINVAL;
+#else
+			return 0;
+#endif
 		}
 	}
 
-- 
cgit v1.2.3


From 364f358a734ddcd827c662ccbfa58ee3ac510762 Mon Sep 17 00:00:00 2001
From: Lachlan McIlroy <lachlan@sgi.com>
Date: Wed, 17 Sep 2008 16:50:14 +1000
Subject: [XFS] Prevent direct I/O from mapping extents beyond eof

With the help from some tracing I found that we try to map extents beyond
eof when doing a direct I/O read. It appears that the way to inform the
generic direct I/O path (ie do_direct_IO()) that we have breached eof is
to return an unmapped buffer from xfs_get_blocks_direct(). This will cause
do_direct_IO() to jump to the hole handling code where is will check for
eof and then abort.

This problem was found because a direct I/O read was trying to map beyond
eof and was encountering delayed allocations. The delayed allocations
beyond eof are speculative allocations and they didn't get converted when
the direct I/O flushed the file because there was only enough space in the
current AG to convert and write out the dirty pages within eof. Note that
xfs_iomap_write_allocate() wont necessarily convert all the delayed
allocation passed to it - it will return after allocating the first extent
- so if the delayed allocation extends beyond eof then it will stay that
way.

SGI-PV: 983683

SGI-Modid: xfs-linux-melb:xfs-kern:31929a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
---
 fs/xfs/linux-2.6/xfs_aops.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index f42f80a3b1fa..a44d68eb50b5 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -1338,6 +1338,10 @@ __xfs_get_blocks(
 	offset = (xfs_off_t)iblock << inode->i_blkbits;
 	ASSERT(bh_result->b_size >= (1 << inode->i_blkbits));
 	size = bh_result->b_size;
+
+	if (!create && direct && offset >= i_size_read(inode))
+		return 0;
+
 	error = xfs_iomap(XFS_I(inode), offset, size,
 			     create ? flags : BMAPI_READ, &iomap, &niomap);
 	if (error)
-- 
cgit v1.2.3


From b5b8c9acd547244eb2b7d0280ba38b9dd01971cc Mon Sep 17 00:00:00 2001
From: David Chinner <david@fromorbit.com>
Date: Wed, 17 Sep 2008 16:50:50 +1000
Subject: [XFS] Fix barrier status change detection.

The current code in xlog_iodone() uses the wrong macro to check if the
barrier has been cleared due to an EOPNOTSUPP error form the lower layer.

SGI-PV: 986143

SGI-Modid: xfs-linux-melb:xfs-kern:31984a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Nathaniel W. Turner <nate@houseofnate.net>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
---
 fs/xfs/xfs_log.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 7812bd036e2b..503ea89e8b9a 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -1037,7 +1037,7 @@ xlog_iodone(xfs_buf_t *bp)
 	 * layer, it means the underlyin device no longer supports
 	 * barrier I/O. Warn loudly and turn off barriers.
 	 */
-	if ((l->l_mp->m_flags & XFS_MOUNT_BARRIER) && !XFS_BUF_ORDERED(bp)) {
+	if ((l->l_mp->m_flags & XFS_MOUNT_BARRIER) && !XFS_BUF_ISORDERED(bp)) {
 		l->l_mp->m_flags &= ~XFS_MOUNT_BARRIER;
 		xfs_fs_cmn_err(CE_WARN, l->l_mp,
 				"xlog_iodone: Barriers are no longer supported"
-- 
cgit v1.2.3


From f9114eba1eb08ee75fd0f1eee780f0290fb3c043 Mon Sep 17 00:00:00 2001
From: David Chinner <david@fromorbit.com>
Date: Wed, 17 Sep 2008 16:51:21 +1000
Subject: [XFS] Prevent lockdep false positives when locking two inodes.

If we call xfs_lock_two_inodes() to grab both the iolock and the ilock,
then drop the ilocks on both inodes, then grab them again (as
xfs_swap_extents() does) then lockdep will report a locking order problem.
This is a false positive.

To avoid this, disallow xfs_lock_two_inodes() fom locking both inode locks
at once - force calers to make two separate calls. This means that nested
dropping and regaining of the ilocks will retain the same lockdep subclass
and so lockdep will not see anything wrong with this code.

SGI-PV: 986238

SGI-Modid: xfs-linux-melb:xfs-kern:31999a

Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
---
 fs/xfs/xfs_dfrag.c    | 9 ++++++++-
 fs/xfs/xfs_vnodeops.c | 8 ++++++++
 2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c
index 760f4c5b5160..75b0cd4da0ea 100644
--- a/fs/xfs/xfs_dfrag.c
+++ b/fs/xfs/xfs_dfrag.c
@@ -149,7 +149,14 @@ xfs_swap_extents(
 
 	sbp = &sxp->sx_stat;
 
-	xfs_lock_two_inodes(ip, tip, lock_flags);
+	/*
+	 * we have to do two separate lock calls here to keep lockdep
+	 * happy. If we try to get all the locks in one call, lock will
+	 * report false positives when we drop the ILOCK and regain them
+	 * below.
+	 */
+	xfs_lock_two_inodes(ip, tip, XFS_IOLOCK_EXCL);
+	xfs_lock_two_inodes(ip, tip, XFS_ILOCK_EXCL);
 	locked = 1;
 
 	/* Verify that both files have the same format */
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index aa238c8fbd7a..98a0aecafddc 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -1838,6 +1838,12 @@ again:
 #endif
 }
 
+/*
+ * xfs_lock_two_inodes() can only be used to lock one type of lock
+ * at a time - the iolock or the ilock, but not both at once. If
+ * we lock both at once, lockdep will report false positives saying
+ * we have violated locking orders.
+ */
 void
 xfs_lock_two_inodes(
 	xfs_inode_t		*ip0,
@@ -1848,6 +1854,8 @@ xfs_lock_two_inodes(
 	int			attempts = 0;
 	xfs_log_item_t		*lp;
 
+	if (lock_mode & (XFS_IOLOCK_SHARED|XFS_IOLOCK_EXCL))
+		ASSERT((lock_mode & (XFS_ILOCK_SHARED|XFS_ILOCK_EXCL)) == 0);
 	ASSERT(ip0->i_ino != ip1->i_ino);
 
 	if (ip0->i_ino > ip1->i_ino) {
-- 
cgit v1.2.3


From e1f5dbd7077eebec794452a516cb02f1669b036d Mon Sep 17 00:00:00 2001
From: Lachlan McIlroy <lachlan@sgi.com>
Date: Wed, 17 Sep 2008 16:52:13 +1000
Subject: [XFS] Fix use-after-free with buffers

We have a use-after-free issue where log completions access buffers via
the buffer log item and the buffer has already been freed. Fix this by
taking a reference on the buffer when attaching the buffer log item and
release the hold when the buffer log item is detached and we no longer
need the buffer. Also create a new function xfs_buf_item_free() to combine
some common code.

SGI-PV: 985757

SGI-Modid: xfs-linux-melb:xfs-kern:32025a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
---
 fs/xfs/xfs_buf_item.c | 44 ++++++++++++++++++++------------------------
 1 file changed, 20 insertions(+), 24 deletions(-)

diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c
index 608c30c3f76b..002fc2617c8e 100644
--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -732,6 +732,7 @@ xfs_buf_item_init(
 	bip->bli_item.li_ops = &xfs_buf_item_ops;
 	bip->bli_item.li_mountp = mp;
 	bip->bli_buf = bp;
+	xfs_buf_hold(bp);
 	bip->bli_format.blf_type = XFS_LI_BUF;
 	bip->bli_format.blf_blkno = (__int64_t)XFS_BUF_ADDR(bp);
 	bip->bli_format.blf_len = (ushort)BTOBB(XFS_BUF_COUNT(bp));
@@ -867,6 +868,21 @@ xfs_buf_item_dirty(
 	return (bip->bli_flags & XFS_BLI_DIRTY);
 }
 
+STATIC void
+xfs_buf_item_free(
+	xfs_buf_log_item_t	*bip)
+{
+#ifdef XFS_TRANS_DEBUG
+	kmem_free(bip->bli_orig);
+	kmem_free(bip->bli_logged);
+#endif /* XFS_TRANS_DEBUG */
+
+#ifdef XFS_BLI_TRACE
+	ktrace_free(bip->bli_trace);
+#endif
+	kmem_zone_free(xfs_buf_item_zone, bip);
+}
+
 /*
  * This is called when the buf log item is no longer needed.  It should
  * free the buf log item associated with the given buffer and clear
@@ -887,18 +903,8 @@ xfs_buf_item_relse(
 	    (XFS_BUF_IODONE_FUNC(bp) != NULL)) {
 		XFS_BUF_CLR_IODONE_FUNC(bp);
 	}
-
-#ifdef XFS_TRANS_DEBUG
-	kmem_free(bip->bli_orig);
-	bip->bli_orig = NULL;
-	kmem_free(bip->bli_logged);
-	bip->bli_logged = NULL;
-#endif /* XFS_TRANS_DEBUG */
-
-#ifdef XFS_BLI_TRACE
-	ktrace_free(bip->bli_trace);
-#endif
-	kmem_zone_free(xfs_buf_item_zone, bip);
+	xfs_buf_rele(bp);
+	xfs_buf_item_free(bip);
 }
 
 
@@ -1120,6 +1126,7 @@ xfs_buf_iodone(
 
 	ASSERT(bip->bli_buf == bp);
 
+	xfs_buf_rele(bp);
 	mp = bip->bli_item.li_mountp;
 
 	/*
@@ -1136,18 +1143,7 @@ xfs_buf_iodone(
 	 * xfs_trans_delete_ail() drops the AIL lock.
 	 */
 	xfs_trans_delete_ail(mp, (xfs_log_item_t *)bip);
-
-#ifdef XFS_TRANS_DEBUG
-	kmem_free(bip->bli_orig);
-	bip->bli_orig = NULL;
-	kmem_free(bip->bli_logged);
-	bip->bli_logged = NULL;
-#endif /* XFS_TRANS_DEBUG */
-
-#ifdef XFS_BLI_TRACE
-	ktrace_free(bip->bli_trace);
-#endif
-	kmem_zone_free(xfs_buf_item_zone, bip);
+	xfs_buf_item_free(bip);
 }
 
 #if defined(XFS_BLI_TRACE)
-- 
cgit v1.2.3


From 2fd6f6ec64ff347447d26646ac6188f3658b383c Mon Sep 17 00:00:00 2001
From: Lachlan McIlroy <lachlan@sgi.com>
Date: Wed, 17 Sep 2008 16:52:50 +1000
Subject: [XFS] Don't do I/O beyond eof when unreserving space

When unreserving space with boundaries that are not block aligned we round
up the start and round down the end boundaries and then use this function,
xfs_zero_remaining_bytes(), to zero the parts of the blocks that got
dropped during the rounding. The problem is we don't consider if these
blocks are beyond eof. Worse still is if we encounter delayed allocations
beyond eof we will try to use the magic delayed allocation block number as
a real block number. If the file size is ever extended to expose these
blocks then we'll go through xfs_zero_eof() to zero them anyway.

SGI-PV: 983683

SGI-Modid: xfs-linux-melb:xfs-kern:32055a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
---
 fs/xfs/xfs_vnodeops.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 98a0aecafddc..8b6812f66a15 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -3160,6 +3160,13 @@ error1:	/* Just cancel transaction */
 /*
  * Zero file bytes between startoff and endoff inclusive.
  * The iolock is held exclusive and no blocks are buffered.
+ *
+ * This function is used by xfs_free_file_space() to zero
+ * partial blocks when the range to free is not block aligned.
+ * When unreserving space with boundaries that are not block
+ * aligned we round up the start and round down the end
+ * boundaries and then use this function to zero the parts of
+ * the blocks that got dropped during the rounding.
  */
 STATIC int
 xfs_zero_remaining_bytes(
@@ -3176,6 +3183,17 @@ xfs_zero_remaining_bytes(
 	int			nimap;
 	int			error = 0;
 
+	/*
+	 * Avoid doing I/O beyond eof - it's not necessary
+	 * since nothing can read beyond eof.  The space will
+	 * be zeroed when the file is extended anyway.
+	 */
+	if (startoff >= ip->i_size)
+		return 0;
+
+	if (endoff > ip->i_size)
+		endoff = ip->i_size;
+
 	bp = xfs_buf_get_noaddr(mp->m_sb.sb_blocksize,
 				XFS_IS_REALTIME_INODE(ip) ?
 				mp->m_rtdev_targp : mp->m_ddev_targp);
-- 
cgit v1.2.3


From 0855f310dff76ae42c5aac32f600f8f692bbd23f Mon Sep 17 00:00:00 2001
From: Sebastian Siewior <bigeasy@linutronix.de>
Date: Tue, 9 Sep 2008 11:17:29 +0200
Subject: UBIFS: create the name of the background thread in every case

If the ubifs partition is mounted RO and then remounted RW we end
up with no thread name in ubifs_remount_rw() and the thread appears
nameless.

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 fs/ubifs/super.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 7562464ac83f..3f4902060c7a 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -1024,14 +1024,13 @@ static int mount_ubifs(struct ubifs_info *c)
 		goto out_dereg;
 	}
 
+	sprintf(c->bgt_name, BGT_NAME_PATTERN, c->vi.ubi_num, c->vi.vol_id);
 	if (!mounted_read_only) {
 		err = alloc_wbufs(c);
 		if (err)
 			goto out_cbuf;
 
 		/* Create background thread */
-		sprintf(c->bgt_name, BGT_NAME_PATTERN, c->vi.ubi_num,
-			c->vi.vol_id);
 		c->bgt = kthread_create(ubifs_bg_thread, c, c->bgt_name);
 		if (!c->bgt)
 			c->bgt = ERR_PTR(-EINVAL);
-- 
cgit v1.2.3


From 6dcfac4f13d6b32fbaa60b64a23249999e66af8e Mon Sep 17 00:00:00 2001
From: Adrian Hunter <ext-adrian.hunter@nokia.com>
Date: Fri, 12 Sep 2008 12:27:47 +0300
Subject: UBIFS: TNC / GC race fixes

- update GC sequence number if any nodes may have been moved
even if GC did not finish the LEB
- don't ignore error return when reading

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 fs/ubifs/gc.c  | 14 +++++++++++---
 fs/ubifs/tnc.c |  2 +-
 2 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/fs/ubifs/gc.c b/fs/ubifs/gc.c
index 13f1019c859f..02aba36fe3d4 100644
--- a/fs/ubifs/gc.c
+++ b/fs/ubifs/gc.c
@@ -334,15 +334,15 @@ int ubifs_garbage_collect_leb(struct ubifs_info *c, struct ubifs_lprops *lp)
 
 		err = move_nodes(c, sleb);
 		if (err)
-			goto out;
+			goto out_inc_seq;
 
 		err = gc_sync_wbufs(c);
 		if (err)
-			goto out;
+			goto out_inc_seq;
 
 		err = ubifs_change_one_lp(c, lnum, c->leb_size, 0, 0, 0, 0);
 		if (err)
-			goto out;
+			goto out_inc_seq;
 
 		/* Allow for races with TNC */
 		c->gced_lnum = lnum;
@@ -369,6 +369,14 @@ int ubifs_garbage_collect_leb(struct ubifs_info *c, struct ubifs_lprops *lp)
 out:
 	ubifs_scan_destroy(sleb);
 	return err;
+
+out_inc_seq:
+	/* We may have moved at least some nodes so allow for races with TNC */
+	c->gced_lnum = lnum;
+	smp_wmb();
+	c->gc_seq += 1;
+	smp_wmb();
+	goto out;
 }
 
 /**
diff --git a/fs/ubifs/tnc.c b/fs/ubifs/tnc.c
index 7da209ab9378..7634c5970887 100644
--- a/fs/ubifs/tnc.c
+++ b/fs/ubifs/tnc.c
@@ -1476,7 +1476,7 @@ again:
 	}
 
 	err = fallible_read_node(c, key, &zbr, node);
-	if (maybe_leb_gced(c, zbr.lnum, gc_seq1)) {
+	if (err <= 0 || maybe_leb_gced(c, zbr.lnum, gc_seq1)) {
 		/*
 		 * The node may have been GC'ed out from under us so try again
 		 * while keeping the TNC mutex locked.
-- 
cgit v1.2.3


From 6e14968c869cd30e236bb626dd0c16421d2a658d Mon Sep 17 00:00:00 2001
From: Adrian Hunter <ext-adrian.hunter@nokia.com>
Date: Wed, 17 Sep 2008 10:52:07 +0300
Subject: UBIFS: remove incorrect assert

The assert was not valid because one of the variables
'taken_empty_lebs' has transient values out of sync
with the other variables.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 fs/ubifs/find.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/ubifs/find.c b/fs/ubifs/find.c
index e045c8b55423..47814cde2407 100644
--- a/fs/ubifs/find.c
+++ b/fs/ubifs/find.c
@@ -507,7 +507,6 @@ int ubifs_find_free_space(struct ubifs_info *c, int min_space, int *free,
 		rsvd_idx_lebs = 0;
 	lebs = c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt -
 	       c->lst.taken_empty_lebs;
-	ubifs_assert(lebs + c->lst.idx_lebs >= c->min_idx_lebs);
 	if (rsvd_idx_lebs < lebs)
 		/*
 		 * OK to allocate an empty LEB, but we still don't want to go
-- 
cgit v1.2.3


From 32dde0f975e430f00f03f80f7dbab585d8b45eab Mon Sep 17 00:00:00 2001
From: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Date: Tue, 9 Sep 2008 04:00:28 +0000
Subject: powerpc: Holly board needs dtbImage target

One of the changes in the bootwrapper makefile introduced the dtbImage
targets for boards that need a simple zImage with a DTB embedded in
them (595be948cce574ff2d5dde5d0426a636a4363c70, "[POWERPC]
bootwrapper: Build multiple cuImages").  When this was done, it broke
booting on the Holly board as the zImage.holly wrapper did not get the
DTB embedded properly.

This changes the target for the Holly board to a dtbImage so that the
wrapper includes the vmlinux, wrapper bits, and DTB.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/boot/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 717a3bc1352e..65d1a8454d2c 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -195,7 +195,7 @@ image-$(CONFIG_PPC_CELLEB)		+= zImage.pseries
 image-$(CONFIG_PPC_CHRP)		+= zImage.chrp
 image-$(CONFIG_PPC_EFIKA)		+= zImage.chrp
 image-$(CONFIG_PPC_PMAC)		+= zImage.pmac
-image-$(CONFIG_PPC_HOLLY)		+= zImage.holly
+image-$(CONFIG_PPC_HOLLY)		+= dtbImage.holly
 image-$(CONFIG_PPC_PRPMC2800)		+= dtbImage.prpmc2800
 image-$(CONFIG_PPC_ISERIES)		+= zImage.iseries
 image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
-- 
cgit v1.2.3


From 2d291e902791e1c8d72bc223b6f063bbb27a1280 Mon Sep 17 00:00:00 2001
From: James Bottomley <James.Bottomley@HansenPartnership.com>
Date: Tue, 9 Sep 2008 14:04:18 +0000
Subject: Fix compile failure with non modular builds

Commit deac93df26b20cf8438339b5935b5f5643bc30c9 ("lib: Correct printk
%pF to work on all architectures") broke the non modular builds by
moving an essential function into modules.c.  Fix this by moving it
out again and into asm/sections.h as an inline.  To do this, the
definition of struct ppc64_opd_entry has been lifted out of modules.c
and put in asm/elf.h where it belongs.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/include/asm/elf.h      |  7 +++++++
 arch/powerpc/include/asm/sections.h | 12 +++++++++++-
 arch/powerpc/kernel/module_64.c     | 19 -------------------
 3 files changed, 18 insertions(+), 20 deletions(-)

diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h
index 80d1f399ee51..64c6ee22eefd 100644
--- a/arch/powerpc/include/asm/elf.h
+++ b/arch/powerpc/include/asm/elf.h
@@ -409,6 +409,13 @@ do {									\
 /* Keep this the last entry.  */
 #define R_PPC64_NUM		107
 
+/* There's actually a third entry here, but it's unused */
+struct ppc64_opd_entry
+{
+	unsigned long funcaddr;
+	unsigned long r2;
+};
+
 #ifdef  __KERNEL__
 
 #ifdef CONFIG_SPU_BASE
diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h
index 7710e9e6660f..07956f3e7844 100644
--- a/arch/powerpc/include/asm/sections.h
+++ b/arch/powerpc/include/asm/sections.h
@@ -2,6 +2,8 @@
 #define _ASM_POWERPC_SECTIONS_H
 #ifdef __KERNEL__
 
+#include <linux/elf.h>
+#include <linux/uaccess.h>
 #include <asm-generic/sections.h>
 
 #ifdef __powerpc64__
@@ -17,7 +19,15 @@ static inline int in_kernel_text(unsigned long addr)
 }
 
 #undef dereference_function_descriptor
-void *dereference_function_descriptor(void *);
+static inline void *dereference_function_descriptor(void *ptr)
+{
+	struct ppc64_opd_entry *desc = ptr;
+	void *p;
+
+	if (!probe_kernel_address(&desc->funcaddr, p))
+		ptr = p;
+	return ptr;
+}
 
 #endif
 
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index ad79de272ff3..1af2377e4992 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -21,9 +21,7 @@
 #include <linux/err.h>
 #include <linux/vmalloc.h>
 #include <linux/bug.h>
-#include <linux/uaccess.h>
 #include <asm/module.h>
-#include <asm/sections.h>
 #include <asm/firmware.h>
 #include <asm/code-patching.h>
 #include <linux/sort.h>
@@ -43,13 +41,6 @@
 #define DEBUGP(fmt , ...)
 #endif
 
-/* There's actually a third entry here, but it's unused */
-struct ppc64_opd_entry
-{
-	unsigned long funcaddr;
-	unsigned long r2;
-};
-
 /* Like PPC32, we need little trampolines to do > 24-bit jumps (into
    the kernel itself).  But on PPC64, these need to be used for every
    jump, actually, to reset r2 (TOC+0x8000). */
@@ -452,13 +443,3 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 
 	return 0;
 }
-
-void *dereference_function_descriptor(void *ptr)
-{
-	struct ppc64_opd_entry *desc = ptr;
-	void *p;
-
-	if (!probe_kernel_address(&desc->funcaddr, p))
-		ptr = p;
-	return ptr;
-}
-- 
cgit v1.2.3


From 380b0fdfd0227d7604cd91ad97fb846ba643e0e7 Mon Sep 17 00:00:00 2001
From: roelkluin <roel.kluin@gmail.com>
Date: Mon, 15 Sep 2008 20:56:44 +0100
Subject: [ARM] 5249/1: davinci: remove redundant check in davinci_psc_config()

id is unsigned, check is redundant.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-davinci/psc.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 720c48b9ee04..aa2fc375a325 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -70,9 +70,6 @@ void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
 {
 	u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask;
 
-	if (id < 0)
-		return;
-
 	mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
 	if (enable)
 		mdctl |= 0x00000003;	/* Enable Module */
-- 
cgit v1.2.3


From 7e8bc3c6db9b4b74842b1c70bbf5c2a99a112b0d Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Wed, 17 Sep 2008 20:58:11 +0100
Subject: [ARM] omap: back out 'internal_clock' support

The structures weren't ready for this change:

arch/arm/plat-omap/devices.c:320: error: 'struct omap_mmc_conf' has no member named 'internal_clock'
arch/arm/plat-omap/devices.c:326: error: implicit declaration of function 'omap_ctrl_readl'
arch/arm/plat-omap/devices.c:326: error: 'OMAP2_CONTROL_DEVCONF0' undeclared (first use in this function)
arch/arm/plat-omap/devices.c:328: error: implicit declaration of function 'omap_ctrl_writel'

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-omap/devices.c | 13 -------------
 1 file changed, 13 deletions(-)

diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index bc1cf30c83e0..01da719a7453 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -316,19 +316,6 @@ static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf)
 				omap_cfg_reg(MMC_DAT3);
 			}
 		}
-#if defined(CONFIG_ARCH_OMAP2420)
-		if (mmc_conf->mmc[0].internal_clock) {
-			/*
-			 * Use internal loop-back in MMC/SDIO
-			 * Module Input Clock selection
-			 */
-			if (cpu_is_omap24xx()) {
-				u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-				v |= (1 << 24); /* not used in 243x */
-				omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
-			}
-		}
-#endif
 	}
 
 #ifdef	CONFIG_ARCH_OMAP16XX
-- 
cgit v1.2.3


From 7424bac82ff3bd956ea04101550e01bdae17284d Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Wed, 17 Sep 2008 22:09:41 +0400
Subject: UBIFS: fix printk format warnings

fs/ubifs/dir.c:428: warning: format '%llu' expects type 'long long
unsigned int', but argument 5 has type 'long unsigned int'

fs/ubifs/debug.c:541: warning: format '%llu' expects type 'long long
unsigned int', but argument 2 has type 'long unsigned int'

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 fs/ubifs/debug.c | 2 +-
 fs/ubifs/dir.c   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/ubifs/debug.c b/fs/ubifs/debug.c
index b9cb77473758..d7f7645779f2 100644
--- a/fs/ubifs/debug.c
+++ b/fs/ubifs/debug.c
@@ -538,7 +538,7 @@ void dbg_dump_node(const struct ubifs_info *c, const void *node)
 		printk(KERN_DEBUG "\t%d orphan inode numbers:\n", n);
 		for (i = 0; i < n; i++)
 			printk(KERN_DEBUG "\t  ino %llu\n",
-			       le64_to_cpu(orph->inos[i]));
+			       (unsigned long long)le64_to_cpu(orph->inos[i]));
 		break;
 	}
 	default:
diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c
index 2b267c9a1806..526c01ec8003 100644
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -426,7 +426,7 @@ static int ubifs_readdir(struct file *file, void *dirent, filldir_t filldir)
 
 	while (1) {
 		dbg_gen("feed '%s', ino %llu, new f_pos %#x",
-			dent->name, le64_to_cpu(dent->inum),
+			dent->name, (unsigned long long)le64_to_cpu(dent->inum),
 			key_hash_flash(c, &dent->key));
 		ubifs_assert(dent->ch.sqnum > ubifs_inode(dir)->creat_sqnum);
 
-- 
cgit v1.2.3


From ee2fa7435b6dddf1ca119f298ad0100cf50c0397 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 17 Sep 2008 13:47:25 +0200
Subject: AMD IOMMU: set iommu sunc flag after command queuing

The iommu->need_sync flag must be set after the command is queued to
avoid race conditions.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/amd_iommu.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 69b4d060b21c..a96d8c049a88 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -140,6 +140,7 @@ static int iommu_completion_wait(struct amd_iommu *iommu)
 static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid)
 {
 	struct iommu_cmd cmd;
+	int ret;
 
 	BUG_ON(iommu == NULL);
 
@@ -147,9 +148,11 @@ static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid)
 	CMD_SET_TYPE(&cmd, CMD_INV_DEV_ENTRY);
 	cmd.data[0] = devid;
 
+	ret = iommu_queue_command(iommu, &cmd);
+
 	iommu->need_sync = 1;
 
-	return iommu_queue_command(iommu, &cmd);
+	return ret;
 }
 
 /*
@@ -159,6 +162,7 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu,
 		u64 address, u16 domid, int pde, int s)
 {
 	struct iommu_cmd cmd;
+	int ret;
 
 	memset(&cmd, 0, sizeof(cmd));
 	address &= PAGE_MASK;
@@ -171,9 +175,11 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu,
 	if (pde) /* PDE bit - we wan't flush everything not only the PTEs */
 		cmd.data[2] |= CMD_INV_IOMMU_PAGES_PDE_MASK;
 
+	ret = iommu_queue_command(iommu, &cmd);
+
 	iommu->need_sync = 1;
 
-	return iommu_queue_command(iommu, &cmd);
+	return ret;
 }
 
 /*
-- 
cgit v1.2.3


From 7e4f88da7bf1887563f70bd5edbbd0479e31dc12 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 17 Sep 2008 14:19:15 +0200
Subject: AMD IOMMU: protect completion wait loop with iommu lock

The unlocked polling of the ComWaitInt bit in the IOMMU completion wait
path is racy. Protect it with the iommu lock.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/amd_iommu.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index a96d8c049a88..042fdc27bc92 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -101,10 +101,10 @@ static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
  */
 static int iommu_completion_wait(struct amd_iommu *iommu)
 {
-	int ret, ready = 0;
+	int ret = 0, ready = 0;
 	unsigned status = 0;
 	struct iommu_cmd cmd;
-	unsigned long i = 0;
+	unsigned long flags, i = 0;
 
 	memset(&cmd, 0, sizeof(cmd));
 	cmd.data[0] = CMD_COMPL_WAIT_INT_MASK;
@@ -112,10 +112,12 @@ static int iommu_completion_wait(struct amd_iommu *iommu)
 
 	iommu->need_sync = 0;
 
-	ret = iommu_queue_command(iommu, &cmd);
+	spin_lock_irqsave(&iommu->lock, flags);
+
+	ret = __iommu_queue_command(iommu, &cmd);
 
 	if (ret)
-		return ret;
+		goto out;
 
 	while (!ready && (i < EXIT_LOOP_COUNT)) {
 		++i;
@@ -130,6 +132,8 @@ static int iommu_completion_wait(struct amd_iommu *iommu)
 
 	if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit()))
 		printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n");
+out:
+	spin_unlock_irqrestore(&iommu->lock, flags);
 
 	return 0;
 }
-- 
cgit v1.2.3


From a3028b8ed1e1e9930bfa70ce4555fb7f9fad3dcc Mon Sep 17 00:00:00 2001
From: Vlad Yasevich <vladislav.yasevich@hp.com>
Date: Thu, 18 Sep 2008 02:48:25 -0700
Subject: sctp: set the skb->ip_summed correctly when sending over loopback.

Loopback used to clobber the ip_summed filed which sctp then used
to figure out if it needed to do checksumming or not.  Now that
loopback doesn't do that any more, sctp needs to set the ip_summed
field correctly.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sctp/output.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/sctp/output.c b/net/sctp/output.c
index 0dc4a7dfb234..225c7123c41f 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -533,7 +533,8 @@ int sctp_packet_transmit(struct sctp_packet *packet)
 	if (!(dst->dev->features & NETIF_F_NO_CSUM)) {
 		crc32 = sctp_start_cksum((__u8 *)sh, cksum_buf_len);
 		crc32 = sctp_end_cksum(crc32);
-	}
+	} else
+		nskb->ip_summed = CHECKSUM_UNNECESSARY;
 
 	/* 3) Put the resultant value into the checksum field in the
 	 *    common header, and leave the rest of the bits unchanged.
-- 
cgit v1.2.3


From 58005b325394b18b8b6a737e06b4128deb2c4e63 Mon Sep 17 00:00:00 2001
From: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Date: Thu, 18 Sep 2008 12:19:39 +0100
Subject: [ARM] 5255/1: Update jornada ssp to remove build errors/warnings

* Adds ssp functions into header so we don't get
"implicit declaration" error at builtime.
* Converts jornada_ssp_start/end functions into voids with
proper declarations (to avoid "prototype..." warning).
* Sorts include files in alphabetical order
* Minor comment changes

Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-sa1100/include/mach/jornada720.h | 11 ++++++++---
 arch/arm/mach-sa1100/jornada720_ssp.c          | 10 +++++-----
 2 files changed, 13 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-sa1100/include/mach/jornada720.h b/arch/arm/mach-sa1100/include/mach/jornada720.h
index bc120850d313..cc6b4bfcecf6 100644
--- a/arch/arm/mach-sa1100/include/mach/jornada720.h
+++ b/arch/arm/mach-sa1100/include/mach/jornada720.h
@@ -1,10 +1,10 @@
 /*
  * arch/arm/mach-sa1100/include/mach/jornada720.h
  *
- * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728
+ * SSP/MCU communication definitions for HP Jornada 710/720/728
  *
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
- *  Copyright (C) 2000 John Ankcorn <jca@lcs.mit.edu>
+ * Copyright 2007,2008 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
+ *  Copyright 2000 John Ankcorn <jca@lcs.mit.edu>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -25,3 +25,8 @@
 #define PWMOFF			0xDF
 #define TXDUMMY			0x11
 #define ERRORCODE		0x00
+
+extern void jornada_ssp_start(void);
+extern void jornada_ssp_end(void);
+extern int jornada_ssp_inout(u8 byte);
+extern int jornada_ssp_byte(u8 byte);
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 06ea7abd9170..28cf36967977 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -21,8 +21,8 @@
 #include <linux/slab.h>
 
 #include <mach/hardware.h>
-#include <asm/hardware/ssp.h>
 #include <mach/jornada720.h>
+#include <asm/hardware/ssp.h>
 
 static DEFINE_SPINLOCK(jornada_ssp_lock);
 static unsigned long jornada_ssp_flags;
@@ -109,12 +109,12 @@ EXPORT_SYMBOL(jornada_ssp_inout);
  * jornada_ssp_start - enable mcu
  *
  */
-int jornada_ssp_start()
+void jornada_ssp_start(void)
 {
 	spin_lock_irqsave(&jornada_ssp_lock, jornada_ssp_flags);
 	GPCR = GPIO_GPIO25;
 	udelay(50);
-	return 0;
+	return;
 };
 EXPORT_SYMBOL(jornada_ssp_start);
 
@@ -122,11 +122,11 @@ EXPORT_SYMBOL(jornada_ssp_start);
  * jornada_ssp_end - disable mcu and turn off lock
  *
  */
-int jornada_ssp_end()
+void jornada_ssp_end(void)
 {
 	GPSR = GPIO_GPIO25;
 	spin_unlock_irqrestore(&jornada_ssp_lock, jornada_ssp_flags);
-	return 0;
+	return;
 };
 EXPORT_SYMBOL(jornada_ssp_end);
 
-- 
cgit v1.2.3


From 0ef46e285c062cbe35d60c0adbff96f530d31c86 Mon Sep 17 00:00:00 2001
From: Vlad Yasevich <vladislav.yasevich@hp.com>
Date: Thu, 18 Sep 2008 16:27:38 -0700
Subject: sctp: do not enable peer features if we can't do them.

Do not enable peer features like addip and auth, if they
are administratively disabled localy.  If the peer resports
that he supports something that we don't, neither end can
use it so enabling it is pointless.  This solves a problem
when talking to a peer that has auth and addip enabled while
we do not.  Found by Andrei Pelinescu-Onciul <andrei@iptel.org>.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sctp/sm_make_chunk.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index e8ca4e54981f..fe94f42fa068 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -1886,11 +1886,13 @@ static void sctp_process_ext_param(struct sctp_association *asoc,
 			    /* if the peer reports AUTH, assume that he
 			     * supports AUTH.
 			     */
-			    asoc->peer.auth_capable = 1;
+			    if (sctp_auth_enable)
+				    asoc->peer.auth_capable = 1;
 			    break;
 		    case SCTP_CID_ASCONF:
 		    case SCTP_CID_ASCONF_ACK:
-			    asoc->peer.asconf_capable = 1;
+			    if (sctp_addip_enable)
+				    asoc->peer.asconf_capable = 1;
 			    break;
 		    default:
 			    break;
@@ -2460,6 +2462,9 @@ do_addr_param:
 		break;
 
 	case SCTP_PARAM_SET_PRIMARY:
+		if (!sctp_addip_enable)
+			goto fall_through;
+
 		addr_param = param.v + sizeof(sctp_addip_param_t);
 
 		af = sctp_get_af_specific(param_type2af(param.p->type));
-- 
cgit v1.2.3


From add52379dde2e5300e2d574b172e62c6cf43b3d3 Mon Sep 17 00:00:00 2001
From: Vlad Yasevich <vladislav.yasevich@hp.com>
Date: Thu, 18 Sep 2008 16:28:27 -0700
Subject: sctp: Fix oops when INIT-ACK indicates that peer doesn't support AUTH

If INIT-ACK is received with SupportedExtensions parameter which
indicates that the peer does not support AUTH, the packet will be
silently ignore, and sctp_process_init() do cleanup all of the
transports in the association.
When T1-Init timer is expires, OOPS happen while we try to choose
a different init transport.

The solution is to only clean up the non-active transports, i.e
the ones that the peer added.  However, that introduces a problem
with sctp_connectx(), because we don't mark the proper state for
the transports provided by the user.  So, we'll simply mark
user-provided transports as ACTIVE.  That will allow INIT
retransmissions to work properly in the sctp_connectx() context
and prevent the crash.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sctp/associola.c     | 9 +++++----
 net/sctp/sm_make_chunk.c | 6 ++----
 2 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index 8472b8b349c4..abd51cef2413 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -599,11 +599,12 @@ struct sctp_transport *sctp_assoc_add_peer(struct sctp_association *asoc,
 	/* Check to see if this is a duplicate. */
 	peer = sctp_assoc_lookup_paddr(asoc, addr);
 	if (peer) {
+		/* An UNKNOWN state is only set on transports added by
+		 * user in sctp_connectx() call.  Such transports should be
+		 * considered CONFIRMED per RFC 4960, Section 5.4.
+		 */
 		if (peer->state == SCTP_UNKNOWN) {
-			if (peer_state == SCTP_ACTIVE)
-				peer->state = SCTP_ACTIVE;
-			if (peer_state == SCTP_UNCONFIRMED)
-				peer->state = SCTP_UNCONFIRMED;
+			peer->state = SCTP_ACTIVE;
 		}
 		return peer;
 	}
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index fe94f42fa068..b599cbba4fbe 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -2321,12 +2321,10 @@ clean_up:
 	/* Release the transport structures. */
 	list_for_each_safe(pos, temp, &asoc->peer.transport_addr_list) {
 		transport = list_entry(pos, struct sctp_transport, transports);
-		list_del_init(pos);
-		sctp_transport_free(transport);
+		if (transport->state != SCTP_ACTIVE)
+			sctp_assoc_rm_peer(asoc, transport);
 	}
 
-	asoc->peer.transport_count = 0;
-
 nomem:
 	return 0;
 }
-- 
cgit v1.2.3


From 27ed9ddfde8d2967076c51815e4ce297c4a18139 Mon Sep 17 00:00:00 2001
From: Benjamin Li <benli@broadcom.com>
Date: Thu, 18 Sep 2008 16:46:11 -0700
Subject: bnx2: Promote vector field in bnx2_irq structure from u16 to unsigned
 int

The bnx2 driver stores/uses the irq value from the pci_dev internally.
But when it stores the irq value, it has been performing an
integer demotion.  Because of the recent changes made to
arch/x86/kernel/io_apic.c, the new method in creating the irq value
(using build_irq_for_pci_dev()) has exposed this bug on x86 systems.

Because of this demotion when calling request_irq() from
bnx2_request_irq(), the driver would get a return code of -EINVAL.
This is because the kernel could not find the requested irq descriptor.
By storing the irq value properly, the kernel can find the correct
irq descriptor and the bnx2 driver can operate normally.

Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index c3c579f98ed0..dfacd31f7ed0 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6597,7 +6597,7 @@ struct flash_spec {
 
 struct bnx2_irq {
 	irq_handler_t	handler;
-	u16		vector;
+	unsigned int	vector;
 	u8		requested;
 	char		name[16];
 };
-- 
cgit v1.2.3


From f55c21fd9a92a444e55ad1ca4e4732d56661bf2e Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yhlu.kernel@gmail.com>
Date: Sat, 13 Sep 2008 13:10:31 -0700
Subject: forcedeth: call restore mac addr in nv_shutdown path

after

| commit f735a2a1a4f2a0f5cd823ce323e82675990469e2
| Author: Tobias Diedrich <ranma+kernel@tdiedrich.de>
| Date:   Sun May 18 15:02:37 2008 +0200
|
|    [netdrvr] forcedeth: setup wake-on-lan before shutting down
|
|    When hibernating in 'shutdown' mode, after saving the image the suspend hook
|    is not called again.
|    However, if the device is in promiscous mode, wake-on-lan will not work.
|    This adds a shutdown hook to setup wake-on-lan before the final shutdown.
|
|    Signed-off-by: Tobias Diedrich <ranma+kernel@tdiedrich.de>
|    Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

my servers with nvidia ck804 and mcp55 will reverse mac address with kexec.

it turns out that we need to restore the mac addr in nv_shutdown().

[akpm@linux-foundation.org: fix typo in printk]
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Tobias Diedrich <ranma+kernel@tdiedrich.de>
Cc: Ayaz Abdulla <aabdulla@nvidia.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/forcedeth.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 0b6ecef9a849..eeb55ed2152d 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -5643,6 +5643,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 		dev->dev_addr[4] = (np->orig_mac[0] >>  8) & 0xff;
 		dev->dev_addr[5] = (np->orig_mac[0] >>  0) & 0xff;
 		writel(txreg|NVREG_TRANSMITPOLL_MAC_ADDR_REV, base + NvRegTransmitPoll);
+		printk(KERN_DEBUG "nv_probe: set workaround bit for reversed mac addr\n");
 	}
 	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
 
@@ -5890,14 +5891,12 @@ static void nv_restore_phy(struct net_device *dev)
 	}
 }
 
-static void __devexit nv_remove(struct pci_dev *pci_dev)
+static void nv_restore_mac_addr(struct pci_dev *pci_dev)
 {
 	struct net_device *dev = pci_get_drvdata(pci_dev);
 	struct fe_priv *np = netdev_priv(dev);
 	u8 __iomem *base = get_hwbase(dev);
 
-	unregister_netdev(dev);
-
 	/* special op: write back the misordered MAC address - otherwise
 	 * the next nv_probe would see a wrong address.
 	 */
@@ -5905,6 +5904,15 @@ static void __devexit nv_remove(struct pci_dev *pci_dev)
 	writel(np->orig_mac[1], base + NvRegMacAddrB);
 	writel(readl(base + NvRegTransmitPoll) & ~NVREG_TRANSMITPOLL_MAC_ADDR_REV,
 	       base + NvRegTransmitPoll);
+}
+
+static void __devexit nv_remove(struct pci_dev *pci_dev)
+{
+	struct net_device *dev = pci_get_drvdata(pci_dev);
+
+	unregister_netdev(dev);
+
+	nv_restore_mac_addr(pci_dev);
 
 	/* restore any phy related changes */
 	nv_restore_phy(dev);
@@ -5975,6 +5983,8 @@ static void nv_shutdown(struct pci_dev *pdev)
 	if (netif_running(dev))
 		nv_close(dev);
 
+	nv_restore_mac_addr(pdev);
+
 	pci_disable_device(pdev);
 	if (system_state == SYSTEM_POWER_OFF) {
 		if (pci_enable_wake(pdev, PCI_D3cold, np->wolenabled))
-- 
cgit v1.2.3


From 78566fecbb12a7616ae9a88b2ffbc8062c4a89e3 Mon Sep 17 00:00:00 2001
From: Christopher Li <chrisl@vmware.com>
Date: Fri, 5 Sep 2008 14:04:05 -0700
Subject: e1000: prevent corruption of EEPROM/NVM

Andrey reports e1000 corruption, and that a patch in vmware's ESX fixed
it.

The EEPROM corruption is triggered by concurrent access of the EEPROM
read/write. Putting a lock around it solve the problem.

[akpm@linux-foundation.org: use DEFINE_SPINLOCK to avoid confusing lockdep]
Signed-off-by: Christopher Li <chrisl@vmware.com>
Reported-by: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: Zach Amsden <zach@vmware.com>
Cc: Pratap Subrahmanyam <pratap@vmware.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Bruce Allan <bruce.w.allan@intel.com>
Cc: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
Cc: John Ronciak <john.ronciak@intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/e1000/e1000_hw.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 9d6edf3e73f9..d04eef53571e 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -144,6 +144,8 @@ static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer);
 static u8 e1000_calculate_mng_checksum(char *buffer, u32 length);
 static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex);
 static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
 
 /* IGP cable length table */
 static const
@@ -168,6 +170,8 @@ u16 e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] =
       83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124,
       104, 109, 114, 118, 121, 124};
 
+static DEFINE_SPINLOCK(e1000_eeprom_lock);
+
 /******************************************************************************
  * Set the phy type member in the hw struct.
  *
@@ -4903,6 +4907,15 @@ static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw)
  * words - number of words to read
  *****************************************************************************/
 s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+    s32 ret;
+    spin_lock(&e1000_eeprom_lock);
+    ret = e1000_do_read_eeprom(hw, offset, words, data);
+    spin_unlock(&e1000_eeprom_lock);
+    return ret;
+}
+
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 {
     struct e1000_eeprom_info *eeprom = &hw->eeprom;
     u32 i = 0;
@@ -5235,6 +5248,16 @@ s32 e1000_update_eeprom_checksum(struct e1000_hw *hw)
  * EEPROM will most likely contain an invalid checksum.
  *****************************************************************************/
 s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+    s32 ret;
+    spin_lock(&e1000_eeprom_lock);
+    ret = e1000_do_write_eeprom(hw, offset, words, data);
+    spin_unlock(&e1000_eeprom_lock);
+    return ret;
+}
+
+
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 {
     struct e1000_eeprom_info *eeprom = &hw->eeprom;
     s32 status = 0;
-- 
cgit v1.2.3


From e7272403d2f9be3dbb7cc185fcc390e781b1af6b Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Fri, 8 Aug 2008 00:18:04 +0200
Subject: e100: Use pci_pme_active to clear PME_Status and disable PME#

Currently e100 uses pci_enable_wake() to clear pending wake-up events
and disable PME# during intitialization, but that function is not
suitable for this purpose, because it immediately returns error code
if device_may_wakeup() returns false for given device.

Make e100 use pci_pme_active(), which carries out exactly the
required operations, instead.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/e100.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 453115acaad2..5cf78d612c45 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -2738,9 +2738,7 @@ static int __devinit e100_probe(struct pci_dev *pdev,
 		nic->flags |= wol_magic;
 
 	/* ack any pending wake events, disable PME */
-	err = pci_enable_wake(pdev, 0, 0);
-	if (err)
-		DPRINTK(PROBE, ERR, "Error clearing wake event\n");
+	pci_pme_active(pdev, false);
 
 	strcpy(netdev->name, "eth%d");
 	if((err = register_netdev(netdev))) {
-- 
cgit v1.2.3


From 9744197c3d7b329590c2be33ad7b17409bd798fe Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Fri, 19 Sep 2008 11:49:54 +1000
Subject: md: Don't wait UNINTERRUPTIBLE for other resync to finish

When two md arrays share some block device (e.g each uses different
partitions on the one device), a resync of one array will wait for
the resync on the other to finish.

This can be a long time and as it currently waits TASK_UNINTERRUPTIBLE,
the softlockup code notices and complains.

So use TASK_INTERRUPTIBLE instead and make sure to flush signals
before calling schedule.

Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/md.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 4790c83d78d0..deeac4b44173 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5761,7 +5761,11 @@ void md_do_sync(mddev_t *mddev)
 					 * time 'round when curr_resync == 2
 					 */
 					continue;
-				prepare_to_wait(&resync_wait, &wq, TASK_UNINTERRUPTIBLE);
+				/* We need to wait 'interruptible' so as not to
+				 * contribute to the load average, and not to
+				 * be caught by 'softlockup'
+				 */
+				prepare_to_wait(&resync_wait, &wq, TASK_INTERRUPTIBLE);
 				if (!kthread_should_stop() &&
 				    mddev2->curr_resync >= mddev->curr_resync) {
 					printk(KERN_INFO "md: delaying %s of %s"
@@ -5769,6 +5773,8 @@ void md_do_sync(mddev_t *mddev)
 					       " share one or more physical units)\n",
 					       desc, mdname(mddev), mdname(mddev2));
 					mddev_put(mddev2);
+					if (signal_pending(current))
+						flush_signals(current);
 					schedule();
 					finish_wait(&resync_wait, &wq);
 					goto try_again;
-- 
cgit v1.2.3


From 7fb61a7b6f9111245867fa2bce47949f4298d430 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Fri, 19 Sep 2008 17:56:54 +0200
Subject: atstk1000: fix build breakage with BOARD_ATSTK100X_SW2_CUSTOM=y

The #ifdef surrounding the code adding the mmc controller had a typo,
causing it to be compiled even when mmc was supposed to be disabled.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/boards/atstk1000/atstk1002.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index ee4c292683e1..dfc3443e23aa 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -325,7 +325,7 @@ static int __init atstk1002_init(void)
 #ifdef CONFIG_BOARD_ATSTK100X_SPI1
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
-#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
 	at32_add_device_mci(0, MCI_PDATA);
 #endif
 #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
-- 
cgit v1.2.3


From 1b771c12b56fdea6c0596a69c63b097b62ce9f41 Mon Sep 17 00:00:00 2001
From: Markus Heidelberg <markus.heidelberg@web.de>
Date: Mon, 8 Sep 2008 00:22:45 +0200
Subject: avr32: add .gitignore files

Ignore Kernel binaries, kernel/vmlinux.lds and a log file.

Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/boot/images/.gitignore | 4 ++++
 arch/avr32/kernel/.gitignore      | 1 +
 2 files changed, 5 insertions(+)
 create mode 100644 arch/avr32/boot/images/.gitignore
 create mode 100644 arch/avr32/kernel/.gitignore

diff --git a/arch/avr32/boot/images/.gitignore b/arch/avr32/boot/images/.gitignore
new file mode 100644
index 000000000000..64ea9d0141d2
--- /dev/null
+++ b/arch/avr32/boot/images/.gitignore
@@ -0,0 +1,4 @@
+uImage
+uImage.srec
+vmlinux.cso
+sfdwarf.log
diff --git a/arch/avr32/kernel/.gitignore b/arch/avr32/kernel/.gitignore
new file mode 100644
index 000000000000..c5f676c3c224
--- /dev/null
+++ b/arch/avr32/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
-- 
cgit v1.2.3


From e37925ebdb9738fc7968119198c6997e79093c02 Mon Sep 17 00:00:00 2001
From: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Date: Wed, 10 Sep 2008 15:52:04 +0200
Subject: avr32: add generic_find_next_le_bit bit function

This patch implements the generic_find_next_le_bit bit function for AVR32
architecture. This is used by EXT4 file system.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/kernel/avr32_ksyms.c |  1 +
 arch/avr32/lib/findbit.S        | 30 ++++++++++++++++++++++++++++++
 2 files changed, 31 insertions(+)

diff --git a/arch/avr32/kernel/avr32_ksyms.c b/arch/avr32/kernel/avr32_ksyms.c
index 84a7d44edc67..11e310c567a9 100644
--- a/arch/avr32/kernel/avr32_ksyms.c
+++ b/arch/avr32/kernel/avr32_ksyms.c
@@ -58,6 +58,7 @@ EXPORT_SYMBOL(find_first_zero_bit);
 EXPORT_SYMBOL(find_next_zero_bit);
 EXPORT_SYMBOL(find_first_bit);
 EXPORT_SYMBOL(find_next_bit);
+EXPORT_SYMBOL(generic_find_next_le_bit);
 EXPORT_SYMBOL(generic_find_next_zero_le_bit);
 
 /* I/O primitives (lib/io-*.S) */
diff --git a/arch/avr32/lib/findbit.S b/arch/avr32/lib/findbit.S
index c6b91dee857c..997b33b2288a 100644
--- a/arch/avr32/lib/findbit.S
+++ b/arch/avr32/lib/findbit.S
@@ -123,6 +123,36 @@ ENTRY(find_next_bit)
 	brgt	1b
 	retal	r11
 
+ENTRY(generic_find_next_le_bit)
+	lsr	r8, r10, 5
+	sub	r9, r11, r10
+	retle	r11
+
+	lsl	r8, 2
+	add	r12, r8
+	andl	r10, 31, COH
+	breq	1f
+
+	/* offset is not word-aligned. Handle the first (32 - r10) bits */
+	ldswp.w	r8, r12[0]
+	sub	r12, -4
+	lsr	r8, r8, r10
+	brne	.L_found
+
+	/* r9 = r9 - (32 - r10) = r9 + r10 - 32 */
+	add	r9, r10
+	sub	r9, 32
+	retle	r11
+
+	/* Main loop. offset must be word-aligned */
+1:	ldswp.w	r8, r12[0]
+	cp.w	r8, 0
+	brne	.L_found
+	sub	r12, -4
+	sub	r9, 32
+	brgt	1b
+	retal	r11
+
 ENTRY(generic_find_next_zero_le_bit)
 	lsr	r8, r10, 5
 	sub	r9, r11, r10
-- 
cgit v1.2.3


From 73d4393d1df4ff3892b040396f101ede94e9e846 Mon Sep 17 00:00:00 2001
From: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Date: Wed, 17 Sep 2008 13:39:45 +0200
Subject: avr32: fix sys_sync_file_range() call convention

On AVR32, all parameters beyond the 5th are passed on the stack. System
calls don't use the stack -- they borrow a callee-saved register
instead. This means that syscalls that take 6 parameters must be called
through a stub that pushes the last parameter on the stack.

This patch adds a stub for sync_file_range syscall on AVR32
architecture.  Tested with uClibc snapshot.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/kernel/syscall-stubs.S | 9 +++++++++
 arch/avr32/kernel/syscall_table.S | 2 +-
 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/avr32/kernel/syscall-stubs.S b/arch/avr32/kernel/syscall-stubs.S
index 890286a1e62b..673178e235f3 100644
--- a/arch/avr32/kernel/syscall-stubs.S
+++ b/arch/avr32/kernel/syscall-stubs.S
@@ -109,3 +109,12 @@ __sys_epoll_pwait:
 	rcall	sys_epoll_pwait
 	sub	sp, -4
 	popm	pc
+
+	.global __sys_sync_file_range
+	.type	__sys_sync_file_range,@function
+__sys_sync_file_range:
+	pushm	lr
+	st.w	--sp, ARG6
+	rcall	sys_sync_file_range
+	sub	sp, -4
+	popm	pc
diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S
index 478bda4c4a09..7ee0057613b3 100644
--- a/arch/avr32/kernel/syscall_table.S
+++ b/arch/avr32/kernel/syscall_table.S
@@ -275,7 +275,7 @@ sys_call_table:
 	.long	sys_set_robust_list
 	.long	sys_get_robust_list	/* 260 */
 	.long	__sys_splice
-	.long	sys_sync_file_range
+	.long	__sys_sync_file_range
 	.long	sys_tee
 	.long	sys_vmsplice
 	.long	__sys_epoll_pwait	/* 265 */
-- 
cgit v1.2.3


From 3d431a742728e6b619ce57a030a92d228c13d1d2 Mon Sep 17 00:00:00 2001
From: Manfred Spraul <manfred@colorfullife.com>
Date: Wed, 20 Aug 2008 15:39:59 +0200
Subject: avr32: nmi_enter() without nmi_exit()

While updating the rcu code, I noticed that do_nmi() for AVR32 is odd:
There is an nmi_enter() call without an nmi_exit().
This can't be correct, it breaks rcu (at least the preempt version) and
lockdep.

[haavard.skinnemoen@atmel.com: fixed another case that returned directly]
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/kernel/traps.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index b835c4c01368..0d987373bc01 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -116,15 +116,15 @@ asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
 	switch (ret) {
 	case NOTIFY_OK:
 	case NOTIFY_STOP:
-		return;
+		break;
 	case NOTIFY_BAD:
 		die("Fatal Non-Maskable Interrupt", regs, SIGINT);
 	default:
+		printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
+		nmi_disable();
 		break;
 	}
-
-	printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
-	nmi_disable();
+	nmi_exit();
 }
 
 asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs)
-- 
cgit v1.2.3


From 9f7263236aa4401f8e52cae084f652175b7a7b5f Mon Sep 17 00:00:00 2001
From: Jes Sorensen <jes@sgi.com>
Date: Fri, 12 Sep 2008 14:12:08 +0200
Subject: KVM: ia64: 'struct fdesc' build fix

Commit 4611a77 ("[IA64] fix compile failure with non modular builds")
introduced struct fdesc into asm/elf.h, which duplicates KVM's definition.
Remove the latter to avoid the build error.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/kvm-ia64.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 7a37d06376be..cd0d1a7284b7 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -38,6 +38,7 @@
 #include <asm/cacheflush.h>
 #include <asm/div64.h>
 #include <asm/tlb.h>
+#include <asm/elf.h>
 
 #include "misc.h"
 #include "vti.h"
@@ -61,12 +62,6 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ NULL }
 };
 
-
-struct fdesc{
-    unsigned long ip;
-    unsigned long gp;
-};
-
 static void kvm_flush_icache(unsigned long start, unsigned long len)
 {
 	int l;
-- 
cgit v1.2.3


From 13b3c3fa27f8f4ed306ce624f446fab000dd8ee4 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Sat, 20 Sep 2008 10:25:19 +0200
Subject: hwmon: (atxp1) Fix device detection logic

The atxp1 device detection code has a major logic flaw, fix it. Not
sure how we managed to miss this when the driver was merged...

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Sebastian Witt <se.witt@gmx.net>
---
 drivers/hwmon/atxp1.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c
index d191118ba0cb..d6b490d3e36f 100644
--- a/drivers/hwmon/atxp1.c
+++ b/drivers/hwmon/atxp1.c
@@ -31,7 +31,7 @@
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("System voltages control via Attansic ATXP1");
-MODULE_VERSION("0.6.2");
+MODULE_VERSION("0.6.3");
 MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
 
 #define ATXP1_VID	0x00
@@ -289,16 +289,16 @@ static int atxp1_detect(struct i2c_client *new_client, int kind,
 	if (!((i2c_smbus_read_byte_data(new_client, 0x3e) == 0) &&
 	     (i2c_smbus_read_byte_data(new_client, 0x3f) == 0) &&
 	     (i2c_smbus_read_byte_data(new_client, 0xfe) == 0) &&
-	     (i2c_smbus_read_byte_data(new_client, 0xff) == 0) )) {
+	     (i2c_smbus_read_byte_data(new_client, 0xff) == 0)))
+		return -ENODEV;
 
-		/* No vendor ID, now checking if registers 0x10,0x11 (non-existent)
-		 * showing the same as register 0x00 */
-		temp = i2c_smbus_read_byte_data(new_client, 0x00);
+	/* No vendor ID, now checking if registers 0x10,0x11 (non-existent)
+	 * showing the same as register 0x00 */
+	temp = i2c_smbus_read_byte_data(new_client, 0x00);
 
-		if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) &&
-			 (i2c_smbus_read_byte_data(new_client, 0x11) == temp) ))
-			return -ENODEV;
-	}
+	if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) &&
+	      (i2c_smbus_read_byte_data(new_client, 0x11) == temp)))
+		return -ENODEV;
 
 	/* Get VRM */
 	temp = vid_which_vrm();
-- 
cgit v1.2.3


From 859b9ef30cc1bdba4b55327b95b22489bd5591c2 Mon Sep 17 00:00:00 2001
From: Andrew Paprocki <andrew@ishiboo.com>
Date: Sat, 20 Sep 2008 10:25:19 +0200
Subject: hwmon: (it87) Fix fan tachometer reading in IT8712F rev 0x7 (I)

The IT8712F v0.9.1 datasheet applies to revisions >= 0x8 (J).
The driver was incorrectly attempting to enable 16-bit fan
readings on rev 0x7 (I) which led to incorrect RPM values.

Signed-off-by: Andrew Paprocki <andrew@ishiboo.com>
Tested-by: John Gumb <john.gumb@tandberg.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/it87.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 30cdb0956779..f1133081cc42 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -273,10 +273,10 @@ struct it87_data {
 static inline int has_16bit_fans(const struct it87_data *data)
 {
 	/* IT8705F Datasheet 0.4.1, 3h == Version G.
-	   IT8712F Datasheet 0.9.1, section 8.3.5 indicates 7h == Version I.
+	   IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J.
 	   These are the first revisions with 16bit tachometer support. */
 	return (data->type == it87 && data->revision >= 0x03)
-	    || (data->type == it8712 && data->revision >= 0x07)
+	    || (data->type == it8712 && data->revision >= 0x08)
 	    || data->type == it8716
 	    || data->type == it8718;
 }
-- 
cgit v1.2.3


From d130d97154f5342973a0fffc0b5a144359273c79 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Sat, 20 Sep 2008 10:25:20 +0200
Subject: hwmon: (ad7414) Make ad7414_update_device() static

This patch makes the needlessly global ad7414_update_device() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/ad7414.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c
index ce8d94fbfd7e..bfda8c80ef24 100644
--- a/drivers/hwmon/ad7414.c
+++ b/drivers/hwmon/ad7414.c
@@ -69,7 +69,7 @@ static inline int ad7414_write(struct i2c_client *client, u8 reg, u8 value)
 	return i2c_smbus_write_byte_data(client, reg, value);
 }
 
-struct ad7414_data *ad7414_update_device(struct device *dev)
+static struct ad7414_data *ad7414_update_device(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct ad7414_data *data = i2c_get_clientdata(client);
-- 
cgit v1.2.3


From fe246eb0b7f2e995c4f172f360bc4e86baccaafe Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Wed, 3 Sep 2008 19:33:30 +0400
Subject: tmio_mmc: fix compilation with debug enabled

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Ian Molton <spyro@f2s.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/host/tmio_mmc.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 9e647a06054f..ba2b4240a86a 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -159,10 +159,10 @@ static inline void tmio_mmc_kunmap_atomic(struct tmio_mmc_host *host,
 #define STATUS_TO_TEXT(a) \
 	do { \
 		if (status & TMIO_STAT_##a) \
-			printf(#a); \
+			printk(#a); \
 	} while (0)
 
-void debug_status(u32 status)
+void pr_debug_status(u32 status)
 {
 	printk(KERN_DEBUG "status: %08x = ", status);
 	STATUS_TO_TEXT(CARD_REMOVE);
-- 
cgit v1.2.3


From 87e60f2b80202575a23fa1bf56c6eb3b419c480a Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Fri, 19 Sep 2008 21:09:27 +0200
Subject: atmel-mci: debugfs: enable clock before dumping regs

Make sure that the peripheral clock is enabled before reading the MMIO
registers for the debugfs "regs" dump.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/host/atmel-mci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 0bd06f5bd62f..6de773d3a0cf 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -195,7 +195,9 @@ static int atmci_regs_show(struct seq_file *s, void *v)
 
 	/* Grab a more or less consistent snapshot */
 	spin_lock_irq(&host->mmc->lock);
+	clk_enable(host->mck);
 	memcpy_fromio(buf, host->regs, MCI_REGS_SIZE);
+	clk_disable(host->mck);
 	spin_unlock_irq(&host->mmc->lock);
 
 	seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n",
-- 
cgit v1.2.3


From b17339a12c279d73869c74a37642035cd2f896f8 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Fri, 19 Sep 2008 21:09:28 +0200
Subject: atmel-mci: Fix memory leak in atmci_regs_show

The debugfs hook atmci_regs_show allocates a temporary buffer for
storing a register snapshot, but it doesn't free it before returning.
Plug this leak.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/host/atmel-mci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 6de773d3a0cf..becca9145070 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -218,6 +218,8 @@ static int atmci_regs_show(struct seq_file *s, void *v)
 	atmci_show_status_reg(s, "SR", buf[MCI_SR / 4]);
 	atmci_show_status_reg(s, "IMR", buf[MCI_IMR / 4]);
 
+	kfree(buf);
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From 75d33cc751214f8388d58fca3ef6d1df786b5861 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Fri, 19 Sep 2008 21:09:29 +0200
Subject: atmel-mci: Fix bogus debugfs file size

We used to store a binary register snapshot in the "regs" file, so we
set the file size to be the size of this snapshot. This is no longer
valid since we switched to using seq_file.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/host/atmel-mci.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index becca9145070..39096083bb61 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -241,7 +241,6 @@ static void atmci_init_debugfs(struct atmel_mci *host)
 	struct mmc_host	*mmc;
 	struct dentry	*root;
 	struct dentry	*node;
-	struct resource	*res;
 
 	mmc = host->mmc;
 	root = mmc->debugfs_root;
@@ -255,9 +254,6 @@ static void atmci_init_debugfs(struct atmel_mci *host)
 	if (!node)
 		goto err;
 
-	res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
-	node->d_inode->i_size = res->end - res->start + 1;
-
 	node = debugfs_create_file("req", S_IRUSR, root, host, &atmci_req_fops);
 	if (!node)
 		goto err;
-- 
cgit v1.2.3


From da45b66ec89bbf3a1c172688c35d4d3a6e8e757f Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Fri, 19 Sep 2008 21:09:30 +0200
Subject: atmel-mci: Set MMC_CAP_NEEDS_POLL if no detect_pin

This allows the mmc core to detect card insertion/removal for slots that
don't have any CD pin wired up.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/host/atmel-mci.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 39096083bb61..917035e16da4 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1059,6 +1059,10 @@ static int __init atmci_probe(struct platform_device *pdev)
 			host->present = !gpio_get_value(host->detect_pin);
 		}
 	}
+
+	if (!gpio_is_valid(host->detect_pin))
+		mmc->caps |= MMC_CAP_NEEDS_POLL;
+
 	if (gpio_is_valid(host->wp_pin)) {
 		if (gpio_request(host->wp_pin, "mmc_wp")) {
 			dev_dbg(&mmc->class_dev, "no WP pin available\n");
-- 
cgit v1.2.3


From 9d4e98e9609bc19d4a8ac4a5c3218358d1820114 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sat, 13 Sep 2008 19:02:07 +0900
Subject: mmc_block: handle error from mmc_register_driver()

Check error from mmc_register_driver() and properly unwind
block device registration.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/card/block.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 86dbb366415a..43d9a5b53e8d 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -613,14 +613,19 @@ static struct mmc_driver mmc_driver = {
 
 static int __init mmc_blk_init(void)
 {
-	int res = -ENOMEM;
+	int res;
 
 	res = register_blkdev(MMC_BLOCK_MAJOR, "mmc");
 	if (res)
 		goto out;
 
-	return mmc_register_driver(&mmc_driver);
+	res = mmc_register_driver(&mmc_driver);
+	if (res)
+		goto out2;
 
+	return 0;
+ out2:
+	unregister_blkdev(MMC_BLOCK_MAJOR, "mmc");
  out:
 	return res;
 }
-- 
cgit v1.2.3


From a650031a6bd16cb6789da9b3c27fc97341239f12 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sat, 13 Sep 2008 19:03:32 +0900
Subject: mmc_test: initialize mmc_test_lock statically

The mutex mmc_test_lock is initialized at every time mmc_test device
is probed. Probing another mmc_test device may break the mutex, if
the probe function is called while the mutex is locked.

This patch fixes it by statically initializing mmc_test_lock.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/card/mmc_test.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index f26b01d811ae..b92b172074ee 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -1040,7 +1040,7 @@ static const struct mmc_test_case mmc_test_cases[] = {
 
 };
 
-static struct mutex mmc_test_lock;
+static DEFINE_MUTEX(mmc_test_lock);
 
 static void mmc_test_run(struct mmc_test_card *test, int testcase)
 {
@@ -1171,8 +1171,6 @@ static int mmc_test_probe(struct mmc_card *card)
 	if ((card->type != MMC_TYPE_MMC) && (card->type != MMC_TYPE_SD))
 		return -ENODEV;
 
-	mutex_init(&mmc_test_lock);
-
 	ret = device_create_file(&card->dev, &dev_attr_test);
 	if (ret)
 		return ret;
-- 
cgit v1.2.3


From 7ee766d8fba9dfd93bf3eca7a8d84a25404a68dc Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Sat, 20 Sep 2008 22:00:40 -0700
Subject: sparc64: Fix disappearing PCI devices on e3500.

Based upon a bug report by Meelis Roos.

The OF device layer builds properties by matching bus types and
applying 'range' properties as appropriate, up to the root.

The match for "PCI" busses is looking at the 'device_type' property,
and this does work %99 of the time.

But on an E3500 system with a PCI QFE card, the DEC 21153 bridge
sitting above the QFE network interface devices has a 'name' of "pci",
but it completely lacks a 'device_type' property.  So we don't match
it as a PCI bus, and subsequently we end up with no resource values at
all for the devices sitting under that DEC bridge.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc64/kernel/of_device.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c
index f845f150f565..100ebd527499 100644
--- a/arch/sparc64/kernel/of_device.c
+++ b/arch/sparc64/kernel/of_device.c
@@ -169,7 +169,7 @@ static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long fla
 
 static int of_bus_pci_match(struct device_node *np)
 {
-	if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) {
+	if (!strcmp(np->name, "pci")) {
 		const char *model = of_get_property(np, "model", NULL);
 
 		if (model && !strcmp(model, "SUNW,simba"))
@@ -200,7 +200,7 @@ static int of_bus_simba_match(struct device_node *np)
 	/* Treat PCI busses lacking ranges property just like
 	 * simba.
 	 */
-	if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) {
+	if (!strcmp(np->name, "pci")) {
 		if (!of_find_property(np, "ranges", NULL))
 			return 1;
 	}
@@ -429,7 +429,7 @@ static int __init use_1to1_mapping(struct device_node *pp)
 	 * it lacks a ranges property, and this will include
 	 * cases like Simba.
 	 */
-	if (!strcmp(pp->type, "pci") || !strcmp(pp->type, "pciex"))
+	if (!strcmp(pp->name, "pci"))
 		return 0;
 
 	return 1;
@@ -714,8 +714,7 @@ static unsigned int __init build_one_device_irq(struct of_device *op,
 				break;
 			}
 		} else {
-			if (!strcmp(pp->type, "pci") ||
-			    !strcmp(pp->type, "pciex")) {
+			if (!strcmp(pp->name, "pci")) {
 				unsigned int this_orig_irq = irq;
 
 				irq = pci_irq_swizzle(dp, pp, irq);
-- 
cgit v1.2.3


From ad55dcaff0e34269f86975ce2ea0da22e9eb74a1 Mon Sep 17 00:00:00 2001
From: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Sat, 20 Sep 2008 22:05:50 -0700
Subject: netdev: simple_tx_hash shouldn't hash inside fragments

Currently simple_tx_hash is hashing inside of udp fragments.  As a result
packets are getting getting sent to all queues when they shouldn't be.
This causes a serious performance regression which can be seen by sending
UDP frames larger than mtu on multiqueue devices.  This change will make
it so that fragments are hashed only as IP datagrams w/o any protocol
information.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/dev.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index e719ed29310f..e8eb2b478344 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -122,6 +122,7 @@
 #include <linux/if_arp.h>
 #include <linux/if_vlan.h>
 #include <linux/ip.h>
+#include <net/ip.h>
 #include <linux/ipv6.h>
 #include <linux/in.h>
 #include <linux/jhash.h>
@@ -1667,7 +1668,7 @@ static u16 simple_tx_hash(struct net_device *dev, struct sk_buff *skb)
 {
 	u32 addr1, addr2, ports;
 	u32 hash, ihl;
-	u8 ip_proto;
+	u8 ip_proto = 0;
 
 	if (unlikely(!simple_tx_hashrnd_initialized)) {
 		get_random_bytes(&simple_tx_hashrnd, 4);
@@ -1676,7 +1677,8 @@ static u16 simple_tx_hash(struct net_device *dev, struct sk_buff *skb)
 
 	switch (skb->protocol) {
 	case __constant_htons(ETH_P_IP):
-		ip_proto = ip_hdr(skb)->protocol;
+		if (!(ip_hdr(skb)->frag_off & htons(IP_MF | IP_OFFSET)))
+			ip_proto = ip_hdr(skb)->protocol;
 		addr1 = ip_hdr(skb)->saddr;
 		addr2 = ip_hdr(skb)->daddr;
 		ihl = ip_hdr(skb)->ihl;
-- 
cgit v1.2.3


From b80a1b80818cd83c6c2109081b43551e7af72c84 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Sat, 20 Sep 2008 17:20:04 +0200
Subject: [MIPS] Fix 64-bit IP checksum code

Use unsigned loads to avoid possible misscalculation of IP checksums.  This
bug was instruced in f761106cd728bcf65b7fe161b10221ee00cf7132 (lmo) /
ed99e2bc1dc5dc54eb5a019f4975562dbef20103 (kernel.org).

[Original fix by Atsushi.  Improved instruction scheduling and fix for
unaligned unsigned load by me -- Ralf]

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/lib/csum_partial.S | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S
index 8d7784122c14..edac9892c51a 100644
--- a/arch/mips/lib/csum_partial.S
+++ b/arch/mips/lib/csum_partial.S
@@ -39,12 +39,14 @@
 #ifdef USE_DOUBLE
 
 #define LOAD   ld
+#define LOAD32 lwu
 #define ADD    daddu
 #define NBYTES 8
 
 #else
 
 #define LOAD   lw
+#define LOAD32 lw
 #define ADD    addu
 #define NBYTES 4
 
@@ -60,6 +62,14 @@
 	ADD	sum, v1;					\
 	.set	pop
 
+#define ADDC32(sum,reg)						\
+	.set	push;						\
+	.set	noat;						\
+	addu	sum, reg;					\
+	sltu	v1, sum, reg;					\
+	addu	sum, v1;					\
+	.set	pop
+
 #define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3)	\
 	LOAD	_t0, (offset + UNIT(0))(src);			\
 	LOAD	_t1, (offset + UNIT(1))(src);			\
@@ -132,7 +142,7 @@ LEAF(csum_partial)
 	beqz	t8, .Lqword_align
 	 andi	t8, src, 0x8
 
-	lw	t0, 0x00(src)
+	LOAD32	t0, 0x00(src)
 	LONG_SUBU	a1, a1, 0x4
 	ADDC(sum, t0)
 	PTR_ADDU	src, src, 0x4
@@ -211,7 +221,7 @@ LEAF(csum_partial)
 	LONG_SRL	t8, t8, 0x2
 
 .Lend_words:
-	lw	t0, (src)
+	LOAD32	t0, (src)
 	LONG_SUBU	t8, t8, 0x1
 	ADDC(sum, t0)
 	.set	reorder				/* DADDI_WAR */
@@ -230,6 +240,9 @@ LEAF(csum_partial)
 	/* Still a full word to go  */
 	ulw	t1, (src)
 	PTR_ADDIU	src, 4
+#ifdef USE_DOUBLE
+	dsll	t1, t1, 32			/* clear lower 32bit */
+#endif
 	ADDC(sum, t1)
 
 1:	move	t1, zero
@@ -280,7 +293,7 @@ LEAF(csum_partial)
 1:
 	.set	reorder
 	/* Add the passed partial csum.  */
-	ADDC(sum, a2)
+	ADDC32(sum, a2)
 	jr	ra
 	.set	noreorder
 	END(csum_partial)
@@ -681,7 +694,7 @@ EXC(	sb	t0, NBYTES-2(dst), .Ls_exc)
 	.set	pop
 1:
 	.set reorder
-	ADDC(sum, psum)
+	ADDC32(sum, psum)
 	jr	ra
 	.set noreorder
 
-- 
cgit v1.2.3


From 6657fe0a0281e06ff46eb42bc18ecb68d8b14b27 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 9 Sep 2008 15:19:10 +0200
Subject: [MIPS] SMTC: Clear TIF_FPUBOUND on clone / fork.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/process.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index b16facd9ea8e..ce7684335a41 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -148,6 +148,8 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	clear_tsk_thread_flag(p, TIF_USEDFPU);
 
 #ifdef CONFIG_MIPS_MT_FPAFF
+	clear_tsk_thread_flag(p, TIF_FPUBOUND);
+
 	/*
 	 * FPU affinity support is cleaner if we track the
 	 * user-visible CPU affinity from the very beginning.
-- 
cgit v1.2.3


From c65a5480ff29198c241f11d39d9e34ab22c72c69 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Mon, 12 Nov 2007 02:05:18 +0900
Subject: [MIPS] Fix potential latency problem due to non-atomic cpu_wait.

If an interrupt happened between checking of NEED_RESCHED and WAIT
instruction, adjust EPC to restart from checking of NEED_RESCHED.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/cpu-probe.c | 16 ++--------------
 arch/mips/kernel/genex.S     | 37 +++++++++++++++++++++++++++++++++++++
 arch/mips/kernel/traps.c     | 22 ++++++++++++++++------
 3 files changed, 55 insertions(+), 20 deletions(-)

diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 335a6ae3d594..11c92dc53791 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -45,18 +45,7 @@ static void r39xx_wait(void)
 	local_irq_enable();
 }
 
-/*
- * There is a race when WAIT instruction executed with interrupt
- * enabled.
- * But it is implementation-dependent wheter the pipelie restarts when
- * a non-enabled interrupt is requested.
- */
-static void r4k_wait(void)
-{
-	__asm__("	.set	mips3			\n"
-		"	wait				\n"
-		"	.set	mips0			\n");
-}
+extern void r4k_wait(void);
 
 /*
  * This variant is preferable as it allows testing need_resched and going to
@@ -128,7 +117,7 @@ static int __init wait_disable(char *s)
 
 __setup("nowait", wait_disable);
 
-static inline void check_wait(void)
+void __init check_wait(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 
@@ -242,7 +231,6 @@ static inline void check_errata(void)
 
 void __init check_bugs32(void)
 {
-	check_wait();
 	check_errata();
 }
 
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index c6ada98ee042..f886dd7f708e 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -20,6 +20,7 @@
 #include <asm/stackframe.h>
 #include <asm/war.h>
 #include <asm/page.h>
+#include <asm/thread_info.h>
 
 #define PANIC_PIC(msg)					\
 		.set push;				\
@@ -126,7 +127,42 @@ handle_vcei:
 
 	__FINIT
 
+	.align	5	/* 32 byte rollback region */
+LEAF(r4k_wait)
+	.set	push
+	.set	noreorder
+	/* start of rollback region */
+	LONG_L	t0, TI_FLAGS($28)
+	nop
+	andi	t0, _TIF_NEED_RESCHED
+	bnez	t0, 1f
+	 nop
+	nop
+	nop
+	.set	mips3
+	wait
+	/* end of rollback region (the region size must be power of two) */
+	.set	pop
+1:
+	jr	ra
+	END(r4k_wait)
+
+	.macro	BUILD_ROLLBACK_PROLOGUE handler
+	FEXPORT(rollback_\handler)
+	.set	push
+	.set	noat
+	MFC0	k0, CP0_EPC
+	PTR_LA	k1, r4k_wait
+	ori	k0, 0x1f	/* 32 byte rollback region */
+	xori	k0, 0x1f
+	bne	k0, k1, 9f
+	MTC0	k0, CP0_EPC
+9:
+	.set pop
+	.endm
+
 	.align  5
+BUILD_ROLLBACK_PROLOGUE handle_int
 NESTED(handle_int, PT_SIZE, sp)
 #ifdef CONFIG_TRACE_IRQFLAGS
 	/*
@@ -201,6 +237,7 @@ NESTED(except_vec_ejtag_debug, 0, sp)
  * This prototype is copied to ebase + n*IntCtl.VS and patched
  * to invoke the handler
  */
+BUILD_ROLLBACK_PROLOGUE except_vec_vi
 NESTED(except_vec_vi, 0, sp)
 	SAVE_SOME
 	SAVE_AT
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 6bee29097a56..5fd0cd020af5 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -46,6 +46,9 @@
 #include <asm/types.h>
 #include <asm/stacktrace.h>
 
+extern void check_wait(void);
+extern asmlinkage void r4k_wait(void);
+extern asmlinkage void rollback_handle_int(void);
 extern asmlinkage void handle_int(void);
 extern asmlinkage void handle_tlbm(void);
 extern asmlinkage void handle_tlbl(void);
@@ -1251,6 +1254,9 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 
 		extern char except_vec_vi, except_vec_vi_lui;
 		extern char except_vec_vi_ori, except_vec_vi_end;
+		extern char rollback_except_vec_vi;
+		char *vec_start = (cpu_wait == r4k_wait) ?
+			&rollback_except_vec_vi : &except_vec_vi;
 #ifdef CONFIG_MIPS_MT_SMTC
 		/*
 		 * We need to provide the SMTC vectored interrupt handler
@@ -1258,11 +1264,11 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 		 * Status.IM bit to be masked before going there.
 		 */
 		extern char except_vec_vi_mori;
-		const int mori_offset = &except_vec_vi_mori - &except_vec_vi;
+		const int mori_offset = &except_vec_vi_mori - vec_start;
 #endif /* CONFIG_MIPS_MT_SMTC */
-		const int handler_len = &except_vec_vi_end - &except_vec_vi;
-		const int lui_offset = &except_vec_vi_lui - &except_vec_vi;
-		const int ori_offset = &except_vec_vi_ori - &except_vec_vi;
+		const int handler_len = &except_vec_vi_end - vec_start;
+		const int lui_offset = &except_vec_vi_lui - vec_start;
+		const int ori_offset = &except_vec_vi_ori - vec_start;
 
 		if (handler_len > VECTORSPACING) {
 			/*
@@ -1272,7 +1278,7 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 			panic("VECTORSPACING too small");
 		}
 
-		memcpy(b, &except_vec_vi, handler_len);
+		memcpy(b, vec_start, handler_len);
 #ifdef CONFIG_MIPS_MT_SMTC
 		BUG_ON(n > 7);	/* Vector index %d exceeds SMTC maximum. */
 
@@ -1554,6 +1560,10 @@ void __init trap_init(void)
 	extern char except_vec3_generic, except_vec3_r4000;
 	extern char except_vec4;
 	unsigned long i;
+	int rollback;
+
+	check_wait();
+	rollback = (cpu_wait == r4k_wait);
 
 #if defined(CONFIG_KGDB)
 	if (kgdb_early_setup)
@@ -1618,7 +1628,7 @@ void __init trap_init(void)
 	if (board_be_init)
 		board_be_init();
 
-	set_except_vector(0, handle_int);
+	set_except_vector(0, rollback ? rollback_handle_int : handle_int);
 	set_except_vector(1, handle_tlbm);
 	set_except_vector(2, handle_tlbl);
 	set_except_vector(3, handle_tlbs);
-- 
cgit v1.2.3


From 6b3766a263a62fc82ca0457faa73dc34b98ceb87 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Tue, 5 Aug 2008 23:45:14 +0900
Subject: [MIPS] vmlinux.lds.S: handle .text.*

The -ffunction-sections puts each text in .text.function_name section.
Without this patch, most functions are placed outside _text..._etext
area and it breaks show_stacktrace(), etc.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/vmlinux.lds.S | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index b5470ceb418b..afb119f35682 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -36,6 +36,7 @@ SECTIONS
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
+		*(.text.*)
 		*(.fixup)
 		*(.gnu.warning)
 	} :text = 0
-- 
cgit v1.2.3


From 795fb7e74dff04f661b61eccd3c48554b7d1f747 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Sat, 20 Sep 2008 12:33:08 +0200
Subject: MAINTAINERS: Trivial whitespace cleanups

* Drop trailing whitespace.
* Replace spaces and combinations of spaces and tabs by single tabs.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 162 ++++++++++++++++++++++++++++++------------------------------
 1 file changed, 81 insertions(+), 81 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 0a613cb926c6..85cfd4d2ff49 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -271,20 +271,20 @@ W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
 
 ACPI WMI DRIVER
-P:      Carlos Corbacho
-M:      carlos@strangeworlds.co.uk
-L:      linux-acpi@vger.kernel.org
-W:      http://www.lesswatts.org/projects/acpi/
-S:      Maintained
+P:	Carlos Corbacho
+M:	carlos@strangeworlds.co.uk
+L:	linux-acpi@vger.kernel.org
+W:	http://www.lesswatts.org/projects/acpi/
+S:	Maintained
 
 AD1889 ALSA SOUND DRIVER
-P:     Kyle McMartin
-M:     kyle@mcmartin.ca
-P:     Thibaut Varene
-M:     T-Bone@parisc-linux.org
-W:     http://wiki.parisc-linux.org/AD1889
-L:     linux-parisc@vger.kernel.org
-S:     Maintained
+P:	Kyle McMartin
+M:	kyle@mcmartin.ca
+P:	Thibaut Varene
+M:	T-Bone@parisc-linux.org
+W:	http://wiki.parisc-linux.org/AD1889
+L:	linux-parisc@vger.kernel.org
+S:	Maintained
 
 ADM1025 HARDWARE MONITOR DRIVER
 P:	Jean Delvare
@@ -473,11 +473,11 @@ L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
-P:      Andrew Victor
-M:      linux@maxim.org.za
-L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
-W:      http://maxim.org.za/at91_26.html
-S:      Maintained
+P:	Andrew Victor
+M:	linux@maxim.org.za
+L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W:	http://maxim.org.za/at91_26.html
+S:	Maintained
 
 ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
 P:	Lennert Buytenhek
@@ -532,10 +532,10 @@ L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/HP JORNADA 7XX MACHINE SUPPORT
-P:      Kristoffer Ericson
-M:      kristoffer.ericson@gmail.com
-W:      www.jlime.com
-S:      Maintained
+P:	Kristoffer Ericson
+M:	kristoffer.ericson@gmail.com
+W:	www.jlime.com
+S:	Maintained
 
 ARM/INTEL IOP32X ARM ARCHITECTURE
 P:	Lennert Buytenhek
@@ -1017,7 +1017,7 @@ T:	git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
 S:	Maintained
 
 CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
-P:   	Jonathan Corbet
+P:	Jonathan Corbet
 M:	corbet@lwn.net
 L:	video4linux-list@redhat.com
 S:	Maintained
@@ -1423,12 +1423,12 @@ L:	linux-acpi@vger.kernel.org
 S:	Supported
 
 DOCUMENTATION (/Documentation directory)
-P:     Michael Kerrisk
-M:     mtk.manpages@gmail.com
-P:     Randy Dunlap
-M:     rdunlap@xenotime.net
-L:     linux-doc@vger.kernel.org
-S:     Maintained
+P:	Michael Kerrisk
+M:	mtk.manpages@gmail.com
+P:	Randy Dunlap
+M:	rdunlap@xenotime.net
+L:	linux-doc@vger.kernel.org
+S:	Maintained
 
 DOUBLETALK DRIVER
 P:	James R. Van Zandt
@@ -1459,7 +1459,7 @@ S:	Maintained
 DVB SUBSYSTEM AND DRIVERS
 P:	LinuxTV.org Project
 M:	v4l-dvb-maintainer@linuxtv.org
-L: 	linux-dvb@linuxtv.org (subscription required)
+L:	linux-dvb@linuxtv.org (subscription required)
 W:	http://linuxtv.org/
 T:	git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
 S:	Maintained
@@ -2108,7 +2108,7 @@ M:	rolandd@cisco.com
 P:	Sean Hefty
 M:	sean.hefty@intel.com
 P:	Hal Rosenstock
-M:	hal.rosenstock@gmail.com 
+M:	hal.rosenstock@gmail.com
 L:	general@lists.openfabrics.org
 W:	http://www.openib.org/
 T:	git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
@@ -2696,17 +2696,17 @@ S:	Maintained
 
 MARVELL YUKON / SYSKONNECT DRIVER
 P:	Mirko Lindner
-M: 	mlindner@syskonnect.de
+M:	mlindner@syskonnect.de
 P:	Ralph Roesler
-M: 	rroesler@syskonnect.de
-W: 	http://www.syskonnect.com
-S: 	Supported
+M:	rroesler@syskonnect.de
+W:	http://www.syskonnect.com
+S:	Supported
 
 MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
 P:	Michael Kerrisk
 M:	mtk.manpages@gmail.com
-W:     http://www.kernel.org/doc/man-pages
-S:     Supported
+W:	http://www.kernel.org/doc/man-pages
+S:	Supported
 
 MARVELL LIBERTAS WIRELESS DRIVER
 P:	Dan Williams
@@ -2867,10 +2867,10 @@ L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
 MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-P:     Felipe Balbi
-M:     felipe.balbi@nokia.com
-L:     linux-usb@vger.kernel.org
-S:     Maintained
+P:	Felipe Balbi
+M:	felipe.balbi@nokia.com
+L:	linux-usb@vger.kernel.org
+S:	Maintained
 
 MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
 P:	Andrew Gallatin
@@ -2882,7 +2882,7 @@ W:	http://www.myri.com/scs/download-Myri10GE.html
 S:	Supported
 
 NATSEMI ETHERNET DRIVER (DP8381x)
-P: 	Tim Hockin
+P:	Tim Hockin
 M:	thockin@hockin.org
 S:	Maintained
 
@@ -3101,7 +3101,7 @@ M:	laforge@gnumonks.org
 S:	Maintained
 
 OMNIVISION OV7670 SENSOR DRIVER
-P:   	Jonathan Corbet
+P:	Jonathan Corbet
 M:	corbet@lwn.net
 L:	video4linux-list@redhat.com
 S:	Maintained
@@ -3211,7 +3211,7 @@ T:	git kernel.org:/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git
 S:	Supported
 
 PCI HOTPLUG CORE
-P: 	Kristen Carlson Accardi
+P:	Kristen Carlson Accardi
 M:	kristen.c.accardi@intel.com
 S:	Supported
 
@@ -3650,7 +3650,7 @@ M:	jmorris@namei.org
 P:	Eric Paris
 M:	eparis@parisplace.org
 L:	linux-kernel@vger.kernel.org (kernel issues)
-L: 	selinux@tycho.nsa.gov (subscribers-only, general discussion)
+L:	selinux@tycho.nsa.gov (subscribers-only, general discussion)
 W:	http://www.nsa.gov/selinux
 S:	Supported
 
@@ -3768,10 +3768,10 @@ M:	bn@niasdigital.com
 S:	Maintained
 
 SOC-CAMERA V4L2 SUBSYSTEM
-P:     Guennadi Liakhovetski
-M:     g.liakhovetski@gmx.de
-L:     video4linux-list@redhat.com
-S:     Maintained
+P:	Guennadi Liakhovetski
+M:	g.liakhovetski@gmx.de
+L:	video4linux-list@redhat.com
+S:	Maintained
 
 SOFTWARE RAID (Multiple Disks) SUPPORT
 P:	Ingo Molnar
@@ -4006,9 +4006,9 @@ T:	git repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git
 S:	Maintained
 
 TI FLASH MEDIA INTERFACE DRIVER
-P:      Alex Dubov
-M:      oakad@yahoo.com
-S:      Maintained
+P:	Alex Dubov
+M:	oakad@yahoo.com
+S:	Maintained
 
 TI OMAP MMC INTERFACE DRIVER
 P:	Carlos Aguiar, Anderson Briglia and Syed Khasim
@@ -4154,13 +4154,13 @@ USB BLOCK DRIVER (UB ub)
 P:	Pete Zaitcev
 M:	zaitcev@redhat.com
 L:	linux-kernel@vger.kernel.org
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Supported
 
 USB CDC ETHERNET DRIVER
 P:	Greg Kroah-Hartman
 M:	greg@kroah.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained
 W:	http://www.kroah.com/linux-usb/
 
@@ -4187,13 +4187,13 @@ S:	Maintained
 USB EHCI DRIVER
 P:	David Brownell
 M:	dbrownell@users.sourceforge.net
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Odd Fixes
 
 USB ET61X[12]51 DRIVER
 P:	Luca Risolia
 M:	luca.risolia@studio.unibo.it
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	video4linux-list@redhat.com
 W:	http://www.linux-projects.org
 S:	Maintained
@@ -4201,33 +4201,33 @@ S:	Maintained
 USB GADGET/PERIPHERAL SUBSYSTEM
 P:	David Brownell
 M:	dbrownell@users.sourceforge.net
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org/gadget
 S:	Maintained
 
 USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
 P:	Jiri Kosina
 M:	jkosina@suse.cz
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 T:	git kernel.org:/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained
 
 USB ISP116X DRIVER
 P:	Olav Kongas
 M:	ok@artecdesign.ee
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained
 
 USB KAWASAKI LSI DRIVER
 P:	Oliver Neukum
 M:	oliver@neukum.name
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained
 
 USB MASS STORAGE DRIVER
 P:	Matthew Dharm
 M:	mdharm-usb@one-eyed-alien.net
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	usb-storage@lists.one-eyed-alien.net
 S:	Maintained
 W:	http://www.one-eyed-alien.net/~mdharm/linux-usb/
@@ -4235,26 +4235,26 @@ W:	http://www.one-eyed-alien.net/~mdharm/linux-usb/
 USB OHCI DRIVER
 P:	David Brownell
 M:	dbrownell@users.sourceforge.net
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Odd Fixes
 
 USB OPTION-CARD DRIVER
 P:	Matthias Urlichs
 M:	smurf@smurf.noris.de
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained
 
 USB OV511 DRIVER
 P:	Mark McClelland
 M:	mmcclell@bigfoot.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 W:	http://alpha.dyndns.org/ov511/
 S:	Maintained
 
 USB PEGASUS DRIVER
 P:	Petko Manolov
 M:	petkan@users.sourceforge.net
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	netdev@vger.kernel.org
 W:	http://pegasus2.sourceforge.net/
 S:	Maintained
@@ -4262,13 +4262,13 @@ S:	Maintained
 USB PRINTER DRIVER (usblp)
 P:	Pete Zaitcev
 M:	zaitcev@redhat.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Supported
 
 USB RTL8150 DRIVER
 P:	Petko Manolov
 M:	petkan@users.sourceforge.net
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	netdev@vger.kernel.org
 W:	http://pegasus2.sourceforge.net/
 S:	Maintained
@@ -4276,20 +4276,20 @@ S:	Maintained
 USB SE401 DRIVER
 P:	Jeroen Vreeken
 M:	pe1rxq@amsat.org
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 W:	http://www.chello.nl/~j.vreeken/se401/
 S:	Maintained
 
 USB SERIAL BELKIN F5U103 DRIVER
 P:	William Greathouse
 M:	wgreathouse@smva.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained
 
 USB SERIAL CYPRESS M8 DRIVER
 P:	Lonnie Mendez
 M:	dignome@gmail.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained
 W:	http://geocities.com/i0xox0i
 W:	http://firstlight.net/cvs
@@ -4304,39 +4304,39 @@ USB SERIAL DIGI ACCELEPORT DRIVER
 P:	Peter Berger and Al Borchers
 M:	pberger@brimson.com
 M:	alborchers@steinerpoint.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained
 
 USB SERIAL DRIVER
 P:	Greg Kroah-Hartman
 M:	gregkh@suse.de
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Supported
 
 USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER
 P:	Gary Brubaker
 M:	xavyer@ix.netcom.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained
 
 USB SERIAL KEYSPAN DRIVER
 P:	Greg Kroah-Hartman
 M:	greg@kroah.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 W:	http://www.kroah.com/linux/
 S:	Maintained
 
 USB SERIAL WHITEHEAT DRIVER
 P:	Support Department
 M:	support@connecttech.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 W:	http://www.connecttech.com
 S:	Supported
 
 USB SN9C1xx DRIVER
 P:	Luca Risolia
 M:	luca.risolia@studio.unibo.it
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	video4linux-list@redhat.com
 W:	http://www.linux-projects.org
 S:	Maintained
@@ -4344,7 +4344,7 @@ S:	Maintained
 USB SUBSYSTEM
 P:	Greg Kroah-Hartman
 M:	gregkh@suse.de
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org
 T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Supported
@@ -4352,7 +4352,7 @@ S:	Supported
 USB UHCI DRIVER
 P:	Alan Stern
 M:	stern@rowland.harvard.edu
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained
 
 USB "USBNET" DRIVER FRAMEWORK
@@ -4373,7 +4373,7 @@ S:	Maintained
 USB W996[87]CF DRIVER
 P:	Luca Risolia
 M:	luca.risolia@studio.unibo.it
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	video4linux-list@redhat.com
 W:	http://www.linux-projects.org
 S:	Maintained
@@ -4387,7 +4387,7 @@ S:	Maintained
 USB ZC0301 DRIVER
 P:	Luca Risolia
 M:	luca.risolia@studio.unibo.it
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	video4linux-list@redhat.com
 W:	http://www.linux-projects.org
 S:	Maintained
@@ -4395,14 +4395,14 @@ S:	Maintained
 USB ZD1201 DRIVER
 P:	Jeroen Vreeken
 M:	pe1rxq@amsat.org
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 W:	http://linux-lc100020.sourceforge.net
 S:	Maintained
 
 USB ZR364XX DRIVER
 P:	Antoine Jacquet
 M:	royale@zerezo.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	video4linux-list@redhat.com
 W:	http://royale.zerezo.com/zr364xx/
 S:	Maintained
-- 
cgit v1.2.3


From baaea1dc0befb7b64e6dbf2d1469d0a296a79e54 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Sat, 20 Sep 2008 12:34:33 +0200
Subject: MAINTAINERS: Various fixes

* Normalize some S: entries to match the enumeration at the beginning
  of the file.
* Change one mailing list entry from S: to L:.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 85cfd4d2ff49..cad81a24e832 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1359,7 +1359,7 @@ P:	Digi International, Inc
 M:	Eng.Linux@digi.com
 L:	Eng.Linux@digi.com
 W:	http://www.digi.com
-S:	Orphaned
+S:	Orphan
 
 DIRECTORY NOTIFICATION
 P:	Stephen Rothwell
@@ -1797,7 +1797,7 @@ FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit)
 P:	Rik Faith
 M:	faith@cs.unc.edu
 L:	linux-scsi@vger.kernel.org
-S:	Odd fixes (e.g., new signatures)
+S:	Odd Fixes (e.g., new signatures)
 
 GDT SCSI DISK ARRAY CONTROLLER DRIVER
 P:	Achim Leubner
@@ -1838,10 +1838,10 @@ S:	Maintained
 HARDWARE MONITORING
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
-S:	Orphaned
+S:	Orphan
 
 HARDWARE RANDOM NUMBER GENERATOR CORE
-S:	Orphaned
+S:	Orphan
 
 HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
 P:	Robert Love
@@ -2735,7 +2735,7 @@ S:	Maintained
 MEGARAID SCSI DRIVERS
 P:	Neela Syam Kolli
 M:	megaraidlinux@lsi.com
-S:	linux-scsi@vger.kernel.org
+L:	linux-scsi@vger.kernel.org
 W:	http://megaraid.lsilogic.com
 S:	Maintained
 
@@ -2853,7 +2853,7 @@ MULTIMEDIA CARD (MMC) ETC. OVER SPI
 P:	David Brownell
 M:	dbrownell@users.sourceforge.net
 L:	linux-kernel@vger.kernel.org
-S:	Odd fixes
+S:	Odd Fixes
 
 MULTISOUND SOUND DRIVER
 P:	Andrew Veliath
@@ -3925,7 +3925,7 @@ S:	Maintained
 
 STARMODE RADIO IP (STRIP) PROTOCOL DRIVER
 W:	http://mosquitonet.Stanford.EDU/strip.html
-S:	Unsupported ?
+S:	Orphan
 
 STRADIS MPEG-2 DECODER DRIVER
 P:	Nathan Laredo
-- 
cgit v1.2.3


From 72d31053f62c4bc464c2783974926969614a8649 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sun, 21 Sep 2008 15:29:55 -0700
Subject: Linux 2.6.27-rc7

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index 4ff83ea36c19..cab896a97296 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 27
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Rotary Wombat
 
 # *DOCUMENTATION*
-- 
cgit v1.2.3


From b61e06f258e50b25c38a73bea782bdb6876f0f70 Mon Sep 17 00:00:00 2001
From: Andrea Righi <righi.andrea@gmail.com>
Date: Sat, 20 Sep 2008 18:02:27 +0200
Subject: x86, oprofile: BUG scheduling while atomic

nmi_shutdown() calls unregister_die_notifier() from an atomic context
after setting preempt_disable() via get_cpu_var():

[ 1049.404154] BUG: scheduling while atomic: oprofiled/7796/0x00000002
[ 1049.404171] INFO: lockdep is turned off.
[ 1049.404176] Modules linked in: oprofile af_packet rfcomm l2cap kvm_intel kvm i915 drm acpi_cpufreq cpufreq_userspace cpufreq_conservative cpufreq_ondemand cpufreq_powersave freq_table container sbs sbshc dm_mod arc4 ecb cryptomgr aead snd_hda_intel crypto_blkcipher snd_pcm_oss crypto_algapi snd_pcm iwlagn iwlcore snd_timer iTCO_wdt led_class btusb iTCO_vendor_support snd psmouse bluetooth mac80211 soundcore cfg80211 snd_page_alloc intel_agp video output button battery ac dcdbas evdev ext3 jbd mbcache sg sd_mod piix ata_piix libata scsi_mod dock tg3 libphy ehci_hcd uhci_hcd usbcore thermal processor fan fuse
[ 1049.404362] Pid: 7796, comm: oprofiled Not tainted 2.6.27-rc5-mm1 #30
[ 1049.404368] Call Trace:
[ 1049.404384]  [<ffffffff804769fd>] thread_return+0x4a0/0x7d3
[ 1049.404396]  [<ffffffff8026ad92>] generic_exec_single+0x52/0xe0
[ 1049.404405]  [<ffffffff8026ae1a>] generic_exec_single+0xda/0xe0
[ 1049.404414]  [<ffffffff8026aee3>] smp_call_function_single+0x73/0x150
[ 1049.404423]  [<ffffffff804770c5>] schedule_timeout+0x95/0xd0
[ 1049.404430]  [<ffffffff80476083>] wait_for_common+0x43/0x180
[ 1049.404438]  [<ffffffff80476154>] wait_for_common+0x114/0x180
[ 1049.404448]  [<ffffffff80236980>] default_wake_function+0x0/0x10
[ 1049.404457]  [<ffffffff8024f810>] synchronize_rcu+0x30/0x40
[ 1049.404463]  [<ffffffff8024f890>] wakeme_after_rcu+0x0/0x10
[ 1049.404472]  [<ffffffff80479ca0>] _spin_unlock_irqrestore+0x40/0x80
[ 1049.404482]  [<ffffffff80256def>] atomic_notifier_chain_unregister+0x3f/0x60
[ 1049.404501]  [<ffffffffa03d8801>] nmi_shutdown+0x51/0x90 [oprofile]
[ 1049.404517]  [<ffffffffa03d6134>] oprofile_shutdown+0x34/0x70 [oprofile]
[ 1049.404532]  [<ffffffffa03d721e>] event_buffer_release+0xe/0x40 [oprofile]
[ 1049.404543]  [<ffffffff802bdcdd>] __fput+0xcd/0x240
[ 1049.404551]  [<ffffffff802baa74>] filp_close+0x54/0x90
[ 1049.404560]  [<ffffffff8023e1d1>] put_files_struct+0xb1/0xd0
[ 1049.404568]  [<ffffffff8023f82f>] do_exit+0x18f/0x930
[ 1049.404576]  [<ffffffff8020be03>] restore_args+0x0/0x30
[ 1049.404584]  [<ffffffff80240006>] do_group_exit+0x36/0xa0
[ 1049.404592]  [<ffffffff8020b7cb>] system_call_fastpath+0x16/0x1b

This can be easily triggered with 'opcontrol --shutdown'.

Simply move get_cpu_var() above unregister_die_notifier().

Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Acked-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/oprofile/nmi_int.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 0227694f7dab..8a5f1614a3d5 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -295,10 +295,12 @@ static void nmi_cpu_shutdown(void *dummy)
 
 static void nmi_shutdown(void)
 {
-	struct op_msrs *msrs = &get_cpu_var(cpu_msrs);
+	struct op_msrs *msrs;
+
 	nmi_enabled = 0;
 	on_each_cpu(nmi_cpu_shutdown, NULL, 1);
 	unregister_die_notifier(&profile_exceptions_nb);
+	msrs = &get_cpu_var(cpu_msrs);
 	model->shutdown(msrs);
 	free_msrs();
 	put_cpu_var(cpu_msrs);
-- 
cgit v1.2.3


From b1132b3d874dcef296a63b46680a41b02de66bb4 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Fri, 19 Sep 2008 18:50:45 +0200
Subject: ALSA: ASoC: Fix at32-pcm build breakage with PM enabled

s/PDC_PTCR/ATMEL_PDC_PTCR/

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/soc/at32/at32-pcm.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/sound/soc/at32/at32-pcm.c b/sound/soc/at32/at32-pcm.c
index 435f1daf177c..c83584f989a9 100644
--- a/sound/soc/at32/at32-pcm.c
+++ b/sound/soc/at32/at32-pcm.c
@@ -434,7 +434,8 @@ static int at32_pcm_suspend(struct platform_device *pdev,
 	params = prtd->params;
 
 	/* Disable the PDC and save the PDC registers */
-	ssc_writex(params->ssc->regs, PDC_PTCR, params->mask->pdc_disable);
+	ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+		   params->mask->pdc_disable);
 
 	prtd->pdc_xpr_save = ssc_readx(params->ssc->regs, params->pdc->xpr);
 	prtd->pdc_xcr_save = ssc_readx(params->ssc->regs, params->pdc->xcr);
@@ -464,7 +465,7 @@ static int at32_pcm_resume(struct platform_device *pdev,
 	ssc_writex(params->ssc->regs, params->pdc->xnpr, prtd->pdc_xnpr_save);
 	ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->pdc_xncr_save);
 
-	ssc_writex(params->ssc->regs, PDC_PTCR, params->mask->pdc_enable);
+	ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, params->mask->pdc_enable);
 	return 0;
 }
 #else /* CONFIG_PM */
-- 
cgit v1.2.3


From cec5eb7be3a104fffd27ca967ee8e15a123050e2 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Mon, 22 Sep 2008 15:58:14 +0100
Subject: pcmcia: Fix broken abuse of dev->driver_data

PCMCIA abuses dev->private_data in the probe methods. Unfortunately it
continues to abuse it after calling drv->probe() which leads to crashes and
other nasties (such as bogus probes of multifunction devices) giving errors like

pcmcia: registering new device pcmcia0.1
kernel: 0.1: GetNextTuple: No more items

Extract the passed data before calling the driver probe function that way
we don't blow up when the driver reuses dev->private_data as its right.

As its close to the final release just move the hack so it works out,
hopefully someone will be sufficiently embarrassed to produce a nice rework
for 2.6.28.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/pcmcia/ds.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 4174d9656e35..34c83d3ca0fa 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -427,6 +427,18 @@ static int pcmcia_device_probe(struct device * dev)
 	p_drv = to_pcmcia_drv(dev->driver);
 	s = p_dev->socket;
 
+	/* The PCMCIA code passes the match data in via dev->driver_data
+	 * which is an ugly hack. Once the driver probe is called it may
+	 * and often will overwrite the match data so we must save it first
+	 *
+	 * handle pseudo multifunction devices:
+	 * there are at most two pseudo multifunction devices.
+	 * if we're matching against the first, schedule a
+	 * call which will then check whether there are two
+	 * pseudo devices, and if not, add the second one.
+	 */
+	did = p_dev->dev.driver_data;
+
 	ds_dbg(1, "trying to bind %s to %s\n", p_dev->dev.bus_id,
 	       p_drv->drv.name);
 
@@ -455,21 +467,14 @@ static int pcmcia_device_probe(struct device * dev)
 		goto put_module;
 	}
 
-	/* handle pseudo multifunction devices:
-	 * there are at most two pseudo multifunction devices.
-	 * if we're matching against the first, schedule a
-	 * call which will then check whether there are two
-	 * pseudo devices, and if not, add the second one.
-	 */
-	did = p_dev->dev.driver_data;
 	if (did && (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) &&
 	    (p_dev->socket->device_count == 1) && (p_dev->device_no == 0))
 		pcmcia_add_device_later(p_dev->socket, 0);
 
- put_module:
+put_module:
 	if (ret)
 		module_put(p_drv->owner);
- put_dev:
+put_dev:
 	if (ret)
 		put_device(dev);
 	return (ret);
-- 
cgit v1.2.3


From d0be7cc7688d0cc2e4daf952c43b5ce86e5c8a1d Mon Sep 17 00:00:00 2001
From: Senthil Balasubramanian <senthilkumar@atheros.com>
Date: Wed, 17 Sep 2008 12:39:49 +0530
Subject: ath9k: connectivity is lost after Group rekeying is done

Connectivtiy is lost after Group rekeying is done. The keytype
maintained by ath9k is reset when group key is updated. Though
sc_keytype can be reset only for broadcast key the proper fix
would be to use mac80211 provided key type from txinfo during
xmit and get rid of sc_keytype from ath9k ath_softc.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Tested-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/core.h | 1 -
 drivers/net/wireless/ath9k/main.c | 3 ---
 drivers/net/wireless/ath9k/xmit.c | 6 +++---
 3 files changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h
index 4ee695b76b88..2f84093331ee 100644
--- a/drivers/net/wireless/ath9k/core.h
+++ b/drivers/net/wireless/ath9k/core.h
@@ -974,7 +974,6 @@ struct ath_softc {
 	u32 sc_keymax;		/* size of key cache */
 	DECLARE_BITMAP(sc_keymap, ATH_KEYMAX);	/* key use bit map */
 	u8 sc_splitmic;		/* split TKIP MIC keys */
-	int sc_keytype;
 
 	/* RX */
 	struct list_head sc_rxbuf;
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 99badf1404c3..099719649c98 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -206,8 +206,6 @@ static int ath_key_config(struct ath_softc *sc,
 	if (!ret)
 		return -EIO;
 
-	if (mac)
-		sc->sc_keytype = hk.kv_type;
 	return 0;
 }
 
@@ -778,7 +776,6 @@ static int ath9k_set_key(struct ieee80211_hw *hw,
 	case DISABLE_KEY:
 		ath_key_delete(sc, key);
 		clear_bit(key->keyidx, sc->sc_keymap);
-		sc->sc_keytype = ATH9K_CIPHER_CLR;
 		break;
 	default:
 		ret = -EINVAL;
diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c
index 550129f717e2..8b332e11a656 100644
--- a/drivers/net/wireless/ath9k/xmit.c
+++ b/drivers/net/wireless/ath9k/xmit.c
@@ -315,11 +315,11 @@ static int ath_tx_prepare(struct ath_softc *sc,
 		txctl->keyix = tx_info->control.hw_key->hw_key_idx;
 		txctl->frmlen += tx_info->control.icv_len;
 
-		if (sc->sc_keytype == ATH9K_CIPHER_WEP)
+		if (tx_info->control.hw_key->alg == ALG_WEP)
 			txctl->keytype = ATH9K_KEY_TYPE_WEP;
-		else if (sc->sc_keytype == ATH9K_CIPHER_TKIP)
+		else if (tx_info->control.hw_key->alg == ALG_TKIP)
 			txctl->keytype = ATH9K_KEY_TYPE_TKIP;
-		else if (sc->sc_keytype == ATH9K_CIPHER_AES_CCM)
+		else if (tx_info->control.hw_key->alg == ALG_CCMP)
 			txctl->keytype = ATH9K_KEY_TYPE_AES;
 	}
 
-- 
cgit v1.2.3


From 5d89945e6ec44494285cb8de85d4f43d4647b740 Mon Sep 17 00:00:00 2001
From: "born.into.silence@gmail.com" <born.into.silence@gmail.com>
Date: Fri, 19 Sep 2008 16:47:06 -0700
Subject: wireless: zd1211rw: add device ID fix wifi dongle "trust nw-3100"

akpm: taken from http://bugzilla.kernel.org/show_bug.cgi?id=11587

I bought the wifi dongle trust nw-3100 wich is in fact a zd1211rw.  Its
hardware id was missing in the sources, adding it made it work flawlessly.

Cc: Daniel Drake <dsd@gentoo.org>
Cc: Ulrich Kunitz <kune@deine-taler.de>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/zd1211rw/zd_usb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index da8b7433e3a6..a60ae86bd5c9 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -58,6 +58,7 @@ static struct usb_device_id usb_ids[] = {
 	{ USB_DEVICE(0x0586, 0x3407), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x129b, 0x1666), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x157e, 0x300a), .driver_info = DEVICE_ZD1211 },
+	{ USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 },
 	/* ZD1211B */
 	{ USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B },
-- 
cgit v1.2.3


From 06f95ea8988513b172080c419e4be8826c55a318 Mon Sep 17 00:00:00 2001
From: Alex Chiang <achiang@hp.com>
Date: Tue, 16 Sep 2008 18:25:33 -0600
Subject: [IA64] Ski simulator doesn't need check_sal_cache_flush

Peter Chubb reported that commit 3463a93def55c309f3c0d0a8aaf216be3be42d64
(Update check_sal_cache_flush to use platform_send_ipi()) broke
Ski because it does not implement IPIs.

Tony Luck suggested we just #ifndef out the call (since the simulator
does not have the SAL bug that this code is attempting to detect and
workaround)

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/setup.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index c27d5b2c182b..de636b215677 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -616,7 +616,9 @@ setup_arch (char **cmdline_p)
 		ia64_mca_init();
 
 	platform_setup(cmdline_p);
+#ifndef CONFIG_IA64_HP_SIM
 	check_sal_cache_flush();
+#endif
 	paging_init();
 }
 
-- 
cgit v1.2.3


From d3758f87f39c5b072dde74c55bfb988262a3a45c Mon Sep 17 00:00:00 2001
From: Jay Lan <jlan@sgi.com>
Date: Mon, 22 Sep 2008 14:21:19 -0700
Subject: [IA64] kexec fails on systems with blocks of uncached memory

Currently a memory segment in memory map with attribute of EFI_MEMORY_UC
is denoted as "System RAM" in /proc/iomem, while memory of attribute
(EFI_MEMORY_WB|EFI_MEMORY_UC) is also labeled the same.

The kexec utility then includes uncached memory as part of vmcore. The
kdump kernel MCA'ed when it tries to save the vmcore to a disk. A normal
"cached" access may cause MCAs.

This patch would label memory with attribute of EFI_MEMORY_UC only as
"Uncached RAM" so that kexec would know not to include it in the vmcore.
I will submit a separate kexec-tools patch to the kexec list.

Signed-off-by: Jay Lan <jlan@sgi.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/efi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index d45f215bc8fc..51b75cea7018 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -1232,9 +1232,10 @@ efi_initialize_iomem_resources(struct resource *code_resource,
 				if (md->attribute & EFI_MEMORY_WP) {
 					name = "System ROM";
 					flags |= IORESOURCE_READONLY;
-				} else {
+				} else if (md->attribute == EFI_MEMORY_UC)
+					name = "Uncached RAM";
+				else
 					name = "System RAM";
-				}
 				break;
 
 			case EFI_ACPI_MEMORY_NVS:
-- 
cgit v1.2.3


From 6115e8557a75b5f24b56ed46c60dffef7e7fa992 Mon Sep 17 00:00:00 2001
From: Senthil Balasubramanian <senthilkumar@atheros.com>
Date: Mon, 22 Sep 2008 14:22:39 +0530
Subject: ath9k: Fix IRQ nobody cared issue with ath9k

IRQs should be disabled before calling free_irq. Also flush pending
IRQs. Pasted the kernel log message for reference.

kernel: irq 17: nobody cared (try booting with the "irqpoll" option)
kernel:  [<c0252d2c>] __report_bad_irq+0x2e/0x6f
kernel:  [<c0252f22>] note_interrupt+0x1b5/0x207
kernel:  [<c025258b>] ? handle_IRQ_event+0x21/0x48
kernel:  [<c02534cb>] handle_fasteoi_irq+0x8e/0xad
kernel:  [<c0205650>] do_IRQ+0x6c/0x84
kernel:  [<c020425f>] common_interrupt+0x23/0x28
kernel:  [<c034f6f6>] ? acpi_idle_enter_simple+0x198/0x205
kernel:  [<c044686c>] ? menu_select+0x5c/0x78
kernel:  [<c0445a95>] cpuidle_idle_call+0x59/0x89
kernel:  [<c02029d7>] cpu_idle+0xae/0xcf
kernel:  [<c0543102>] rest_init+0x4e/0x50
kernel:  =======================
kernel: handlers:
kernel: [<f88fdd26>] (ath_isr+0x0/0x13a [ath9k])
kernel: Disabling IRQ #17

Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Tested-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/core.c | 4 ++--
 drivers/net/wireless/ath9k/main.c | 9 ++++++++-
 2 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath9k/core.c b/drivers/net/wireless/ath9k/core.c
index f6c45288d0e7..c04959357bda 100644
--- a/drivers/net/wireless/ath9k/core.c
+++ b/drivers/net/wireless/ath9k/core.c
@@ -294,8 +294,6 @@ static int ath_stop(struct ath_softc *sc)
 	 * hardware is gone (invalid).
 	 */
 
-	if (!sc->sc_invalid)
-		ath9k_hw_set_interrupts(ah, 0);
 	ath_draintxq(sc, false);
 	if (!sc->sc_invalid) {
 		ath_stoprecv(sc);
@@ -1336,6 +1334,8 @@ void ath_deinit(struct ath_softc *sc)
 
 	DPRINTF(sc, ATH_DBG_CONFIG, "%s\n", __func__);
 
+	tasklet_kill(&sc->intr_tq);
+	tasklet_kill(&sc->bcon_tasklet);
 	ath_stop(sc);
 	if (!sc->sc_invalid)
 		ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 099719649c98..acebdf1d20a8 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -1411,10 +1411,17 @@ static void ath_pci_remove(struct pci_dev *pdev)
 {
 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 	struct ath_softc *sc = hw->priv;
+	enum ath9k_int status;
 
-	if (pdev->irq)
+	if (pdev->irq) {
+		ath9k_hw_set_interrupts(sc->sc_ah, 0);
+		/* clear the ISR */
+		ath9k_hw_getisr(sc->sc_ah, &status);
+		sc->sc_invalid = 1;
 		free_irq(pdev->irq, sc);
+	}
 	ath_detach(sc);
+
 	pci_iounmap(pdev, sc->mem);
 	pci_release_region(pdev, 0);
 	pci_disable_device(pdev);
-- 
cgit v1.2.3


From bdbef3d696ca83489eb653459b5a7a62ecf5596a Mon Sep 17 00:00:00 2001
From: Marcel Holtmann <marcel@holtmann.org>
Date: Tue, 23 Sep 2008 00:16:35 +0200
Subject: [Bluetooth] Fix I/O errors on MacBooks with Broadcom chips

The newer MacBooks contain a Broadcom based Bluetooth chip and to make
this work properly, HCI_Reset must be send first. If HCI_Reset is not
used then a lot of I/O errors show up and its triggers packets from
non-existent ACL links.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/btusb.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 6a010681ecf3..7665347238c7 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -104,6 +104,9 @@ static struct usb_device_id blacklist_table[] = {
 	/* Broadcom BCM2046 */
 	{ USB_DEVICE(0x0a5c, 0x2151), .driver_info = BTUSB_RESET },
 
+	/* Apple MacBook Pro with Broadcom chip */
+	{ USB_DEVICE(0x05ac, 0x820f), .driver_info = BTUSB_RESET },
+
 	/* IBM/Lenovo ThinkPad with Broadcom chip */
 	{ USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
 	{ USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
-- 
cgit v1.2.3


From e8c3c3d22b340a406a9aab1b7a9f436636c3de9d Mon Sep 17 00:00:00 2001
From: Marcel Holtmann <marcel@holtmann.org>
Date: Tue, 23 Sep 2008 00:16:36 +0200
Subject: [Bluetooth] Fix wrong URB handling of btusb driver

The btusb driver contains two typos that result in some buggy behavior,
but the impact is not immediately visible.

During initialization the submitting of interrupt URBs might fail and
then make sure to remove the correct flag and not one of the hci_dev
flags.

When closing down the interface make sure to kill the anchor for the
ISOC URBs and not kill the interrupt URBs twice.

Also cancel any scheduled work when closing down the interface.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/btusb.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 7665347238c7..b4756a6a3a68 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -519,7 +519,7 @@ static int btusb_open(struct hci_dev *hdev)
 
 	err = btusb_submit_intr_urb(hdev);
 	if (err < 0) {
-		clear_bit(BTUSB_INTR_RUNNING, &hdev->flags);
+		clear_bit(BTUSB_INTR_RUNNING, &data->flags);
 		clear_bit(HCI_RUNNING, &hdev->flags);
 	}
 
@@ -535,8 +535,10 @@ static int btusb_close(struct hci_dev *hdev)
 	if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
 		return 0;
 
+	cancel_work_sync(&data->work);
+
 	clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
-	usb_kill_anchored_urbs(&data->intr_anchor);
+	usb_kill_anchored_urbs(&data->isoc_anchor);
 
 	clear_bit(BTUSB_BULK_RUNNING, &data->flags);
 	usb_kill_anchored_urbs(&data->bulk_anchor);
-- 
cgit v1.2.3


From 5fbcd260c2c52f78cd699f65e9c7af2e60b5380c Mon Sep 17 00:00:00 2001
From: Marcel Holtmann <marcel@holtmann.org>
Date: Tue, 23 Sep 2008 00:16:36 +0200
Subject: [Bluetooth] Fix USB disconnect handling of btusb driver

The USB transport specification for Bluetooth splits the ACL and SCO
handling into two separate interfaces. In Linux it possible to probe
and disconnect these interfaces independently. So make sure that both
interfaces are tightly bound together.

This fixes the suspend regression that some people have expierenced.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/btusb.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index b4756a6a3a68..29ae99817c60 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -172,6 +172,7 @@ static struct usb_device_id blacklist_table[] = {
 struct btusb_data {
 	struct hci_dev       *hdev;
 	struct usb_device    *udev;
+	struct usb_interface *intf;
 	struct usb_interface *isoc;
 
 	spinlock_t lock;
@@ -826,6 +827,7 @@ static int btusb_probe(struct usb_interface *intf,
 	}
 
 	data->udev = interface_to_usbdev(intf);
+	data->intf = intf;
 
 	spin_lock_init(&data->lock);
 
@@ -894,7 +896,7 @@ static int btusb_probe(struct usb_interface *intf,
 
 	if (data->isoc) {
 		err = usb_driver_claim_interface(&btusb_driver,
-							data->isoc, NULL);
+							data->isoc, data);
 		if (err < 0) {
 			hci_free_dev(hdev);
 			kfree(data);
@@ -926,13 +928,22 @@ static void btusb_disconnect(struct usb_interface *intf)
 
 	hdev = data->hdev;
 
-	if (data->isoc)
-		usb_driver_release_interface(&btusb_driver, data->isoc);
+	__hci_dev_hold(hdev);
 
-	usb_set_intfdata(intf, NULL);
+	usb_set_intfdata(data->intf, NULL);
+
+	if (data->isoc)
+		usb_set_intfdata(data->isoc, NULL);
 
 	hci_unregister_dev(hdev);
 
+	if (intf == data->isoc)
+		usb_driver_release_interface(&btusb_driver, data->intf);
+	else if (data->isoc)
+		usb_driver_release_interface(&btusb_driver, data->isoc);
+
+	__hci_dev_put(hdev);
+
 	hci_free_dev(hdev);
 }
 
-- 
cgit v1.2.3


From 44b50e5a1af13c605d6c3b17a60e42eb0ee48d5f Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Mon, 22 Sep 2008 15:42:24 -0700
Subject: sparc64: Fix missing devices due to PCI bridge test in
 of_create_pci_dev().

Just like in the arch/sparc64/kernel/of_device.c code fix commit
071d7f4c3b411beae08d27656e958070c43b78b4 ("sparc64: Fix SMP bootup
with CONFIG_STACK_DEBUG or ftrace.") we have to check the OF device
node name for "pci" instead of relying upon the 'device_type' property
being there on all PCI bridges.

Tested by Meelis Roos, and confirmed to make the PCI QFE devices
reappear on the E3500 system.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc64/kernel/pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c
index 55096195458f..80dad76f8b81 100644
--- a/arch/sparc64/kernel/pci.c
+++ b/arch/sparc64/kernel/pci.c
@@ -425,7 +425,7 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 	dev->current_state = 4;		/* unknown power state */
 	dev->error_state = pci_channel_io_normal;
 
-	if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
+	if (!strcmp(node->name, "pci")) {
 		/* a PCI-PCI bridge */
 		dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
 		dev->rom_base_reg = PCI_ROM_ADDRESS1;
-- 
cgit v1.2.3


From 7f605ac00416d763c2d9681e378a75e7adbb06e8 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sat, 13 Sep 2008 18:47:19 +0900
Subject: [WATCHDOG] ibmasr: remove unnecessary spin_unlock()

__asr_toggle() is always called with asr_lock held.
But there is unnecessary spin_unlock() call in __asr_toggle().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Andrey Panin <pazke@donpac.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
 drivers/watchdog/ibmasr.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/watchdog/ibmasr.c b/drivers/watchdog/ibmasr.c
index b82405cfb4cd..89fcefcc8510 100644
--- a/drivers/watchdog/ibmasr.c
+++ b/drivers/watchdog/ibmasr.c
@@ -85,7 +85,6 @@ static void __asr_toggle(void)
 
 	outb(reg & ~asr_toggle_mask, asr_write_addr);
 	reg = inb(asr_read_addr);
-	spin_unlock(&asr_lock);
 }
 
 static void asr_toggle(void)
-- 
cgit v1.2.3


From edf86c9b98b5162bed64a70f9424bd2dd58a717e Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 16 Sep 2008 11:31:01 +0100
Subject: [WATCHDOG] wdt285: fix sparse warnings

The wdt285.c watchdog driver is producing a number of
sparse errors due to missing __user attributes to calls
to put_user and copy_to_user, as well as in the prototype
of watchdog_write.

wdt285.c:144:21: warning: incorrect type in argument 1 (different address spaces)
wdt285.c:144:21:    expected void [noderef] <asn:1>*to
wdt285.c:144:21:    got void *<noident>
wdt285.c:150:9: warning: incorrect type in initializer (different address spaces)
wdt285.c:150:9:    expected int const [noderef] <asn:1>*register __p
wdt285.c:150:9:    got int *<noident>
wdt285.c:159:9: warning: incorrect type in initializer (different address spaces)
wdt285.c:159:9:    expected int const [noderef] <asn:1>*register __p
wdt285.c:159:9:    got int *<noident>
wdt285.c:174:9: warning: incorrect type in initializer (different address spaces)
wdt285.c:174:9:    expected int const [noderef] <asn:1>*register __p
wdt285.c:174:9:    got int *<noident>
wdt285.c:183:12: warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
wdt285.c:183:12:    expected int ( *write )( ... )
wdt285.c:183:12:    got int ( static [toplevel] *<noident> )( ... )

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
 drivers/watchdog/wdt285.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/watchdog/wdt285.c b/drivers/watchdog/wdt285.c
index db362c34958b..191ea6302107 100644
--- a/drivers/watchdog/wdt285.c
+++ b/drivers/watchdog/wdt285.c
@@ -115,8 +115,8 @@ static int watchdog_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static ssize_t watchdog_write(struct file *file, const char *data,
-						size_t len, loff_t *ppos)
+static ssize_t watchdog_write(struct file *file, const char __user *data,
+			      size_t len, loff_t *ppos)
 {
 	/*
 	 *	Refresh the timer.
@@ -133,21 +133,22 @@ static const struct watchdog_info ident = {
 };
 
 static long watchdog_ioctl(struct file *file, unsigned int cmd,
-							unsigned long arg)
+			   unsigned long arg)
 {
 	unsigned int new_margin;
+	int __user *int_arg = (int __user *)arg;
 	int ret = -ENOTTY;
 
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
 		ret = 0;
-		if (copy_to_user((void *)arg, &ident, sizeof(ident)))
+		if (copy_to_user((void __user *)arg, &ident, sizeof(ident)))
 			ret = -EFAULT;
 		break;
 
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
-		ret = put_user(0, (int *)arg);
+		ret = put_user(0, int_arg);
 		break;
 
 	case WDIOC_KEEPALIVE:
@@ -156,7 +157,7 @@ static long watchdog_ioctl(struct file *file, unsigned int cmd,
 		break;
 
 	case WDIOC_SETTIMEOUT:
-		ret = get_user(new_margin, (int *)arg);
+		ret = get_user(new_margin, int_arg);
 		if (ret)
 			break;
 
@@ -171,7 +172,7 @@ static long watchdog_ioctl(struct file *file, unsigned int cmd,
 		watchdog_ping();
 		/* Fall */
 	case WDIOC_GETTIMEOUT:
-		ret = put_user(soft_margin, (int *)arg);
+		ret = put_user(soft_margin, int_arg);
 		break;
 	}
 	return ret;
-- 
cgit v1.2.3


From 7275fc8c36dbad3a871f82b1f9f1f524688176ea Mon Sep 17 00:00:00 2001
From: Wim Van Sebroeck <wim@iguana.be>
Date: Thu, 18 Sep 2008 12:26:15 +0000
Subject: [WATCHDOG] unlocked_ioctl changes

Fix some drivers so that they use the unlocked_ioctl call.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
 drivers/watchdog/geodewdt.c    | 6 +++---
 drivers/watchdog/pnx4008_wdt.c | 4 ++--
 drivers/watchdog/rc32434_wdt.c | 6 +++---
 drivers/watchdog/rdc321x_wdt.c | 6 +++---
 4 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c
index 614a5c7017b6..6799a6de66fe 100644
--- a/drivers/watchdog/geodewdt.c
+++ b/drivers/watchdog/geodewdt.c
@@ -130,8 +130,8 @@ static ssize_t geodewdt_write(struct file *file, const char __user *data,
 	return len;
 }
 
-static int geodewdt_ioctl(struct inode *inode, struct file *file,
-				unsigned int cmd, unsigned long arg)
+static long geodewdt_ioctl(struct file *file, unsigned int cmd,
+				unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
@@ -198,7 +198,7 @@ static const struct file_operations geodewdt_fops = {
 	.owner          = THIS_MODULE,
 	.llseek         = no_llseek,
 	.write          = geodewdt_write,
-	.ioctl          = geodewdt_ioctl,
+	.unlocked_ioctl = geodewdt_ioctl,
 	.open           = geodewdt_open,
 	.release        = geodewdt_release,
 };
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index 0ed84162437b..6d9f3d4a9987 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -173,8 +173,8 @@ static const struct watchdog_info ident = {
 	.identity = "PNX4008 Watchdog",
 };
 
-static long pnx4008_wdt_ioctl(struct inode *inode, struct file *file,
-					unsigned int cmd, unsigned long arg)
+static long pnx4008_wdt_ioctl(struct file *file, unsigned int cmd,
+				unsigned long arg)
 {
 	int ret = -ENOTTY;
 	int time;
diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c
index 6756bcb009ed..c9c73b69c5e5 100644
--- a/drivers/watchdog/rc32434_wdt.c
+++ b/drivers/watchdog/rc32434_wdt.c
@@ -182,8 +182,8 @@ static ssize_t rc32434_wdt_write(struct file *file, const char *data,
 	return 0;
 }
 
-static int rc32434_wdt_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long rc32434_wdt_ioctl(struct file *file, unsigned int cmd,
+				unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	int new_timeout;
@@ -242,7 +242,7 @@ static struct file_operations rc32434_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= rc32434_wdt_write,
-	.ioctl		= rc32434_wdt_ioctl,
+	.unlocked_ioctl	= rc32434_wdt_ioctl,
 	.open		= rc32434_wdt_open,
 	.release	= rc32434_wdt_release,
 };
diff --git a/drivers/watchdog/rdc321x_wdt.c b/drivers/watchdog/rdc321x_wdt.c
index 9108efa73e7d..bf92802f2bbe 100644
--- a/drivers/watchdog/rdc321x_wdt.c
+++ b/drivers/watchdog/rdc321x_wdt.c
@@ -144,8 +144,8 @@ static int rdc321x_wdt_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static int rdc321x_wdt_ioctl(struct inode *inode, struct file *file,
-				unsigned int cmd, unsigned long arg)
+static long rdc321x_wdt_ioctl(struct file *file, unsigned int cmd,
+				unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	unsigned int value;
@@ -204,7 +204,7 @@ static ssize_t rdc321x_wdt_write(struct file *file, const char __user *buf,
 static const struct file_operations rdc321x_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.ioctl		= rdc321x_wdt_ioctl,
+	.unlocked_ioctl	= rdc321x_wdt_ioctl,
 	.open		= rdc321x_wdt_open,
 	.write		= rdc321x_wdt_write,
 	.release	= rdc321x_wdt_release,
-- 
cgit v1.2.3


From 05e12e1c4c09cd35ac9f4e6af1e42b0036375d72 Mon Sep 17 00:00:00 2001
From: Ravikiran G Thirumalai <kiran@scalex86.org>
Date: Mon, 22 Sep 2008 22:58:47 -0700
Subject: x86: fix 27-rc crash on vsmp due to paravirt during module load

27-rc fails to boot up if configured to use modules.

Turns out vsmp_patch was marked __init, and vsmp_patch being the
pvops 'patch' routine for vsmp, a call to vsmp_patch just turns out
to execute a code page with series of 0xcc (POISON_FREE_INITMEM -- int3).

vsmp_patch has been marked with __init ever since pvops, however,
apply_paravirt can be called during module load causing calls to
freed memory location.

Since apply_paravirt can only be called during init/module load, make
vsmp_patch with "__init_or_module"

Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/vsmp_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c
index 0c029e8959c7..7766d36983fc 100644
--- a/arch/x86/kernel/vsmp_64.c
+++ b/arch/x86/kernel/vsmp_64.c
@@ -61,7 +61,7 @@ static void vsmp_irq_enable(void)
 	native_restore_fl((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC));
 }
 
-static unsigned __init vsmp_patch(u8 type, u16 clobbers, void *ibuf,
+static unsigned __init_or_module vsmp_patch(u8 type, u16 clobbers, void *ibuf,
 				  unsigned long addr, unsigned len)
 {
 	switch (type) {
-- 
cgit v1.2.3


From fa748203175de7c08f2df80e5a0eeca40329b5e2 Mon Sep 17 00:00:00 2001
From: Rakib Mullick <rakib.mullick@gmail.com>
Date: Mon, 22 Sep 2008 14:55:45 -0700
Subject: sched: fix init_hrtick() section mismatch warning

LD      kernel/built-in.o
WARNING: kernel/built-in.o(.text+0x326): Section mismatch in reference
from the function init_hrtick() to the variable
.cpuinit.data:hotplug_hrtick_nb.8
The function init_hrtick() references
the variable __cpuinitdata hotplug_hrtick_nb.8.
This is often because init_hrtick lacks a __cpuinitdata
annotation or the annotation of hotplug_hrtick_nb.8 is wrong.

Signed-off-by: Md.Rakib H. Mullick <rakib.mullick@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched.c b/kernel/sched.c
index 98890807375b..13dd2db9fb2d 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -1087,7 +1087,7 @@ hotplug_hrtick(struct notifier_block *nfb, unsigned long action, void *hcpu)
 	return NOTIFY_DONE;
 }
 
-static void init_hrtick(void)
+static __init void init_hrtick(void)
 {
 	hotcpu_notifier(hotplug_hrtick, 0);
 }
-- 
cgit v1.2.3


From 6441402b1f173fa38e561d3cee7c01c32e5281ad Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Mon, 22 Sep 2008 18:46:37 +0200
Subject: clockevents: prevent cpu online to interfere with nohz

Impact: rare hang which can be triggered on CPU online.

tick_do_timer_cpu keeps track of the CPU which updates jiffies
via do_timer. The value -1 is used to signal, that currently no
CPU is doing this. There are two cases, where the variable can
have this state:

 boot:
    necessary for systems where the boot cpu id can be != 0

 nohz long idle sleep:
    When the CPU which did the jiffies update last goes into
    a long idle sleep it drops the update jiffies duty so
    another CPU which is not idle can pick it up and keep
    jiffies going.

Using the same value for both situations is wrong, as the CPU online
code can see the -1 state when the timer of the newly onlined CPU is
setup. The setup for a newly onlined CPU goes through periodic mode
and can pick up the do_timer duty without being aware of the nohz /
highres mode of the already running system.

Use two separate states and make them constants to avoid magic
numbers confusion.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 kernel/time/tick-common.c   | 7 ++++---
 kernel/time/tick-internal.h | 4 ++++
 kernel/time/tick-sched.c    | 8 ++++----
 3 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c
index 019315ebf9de..b523d095decf 100644
--- a/kernel/time/tick-common.c
+++ b/kernel/time/tick-common.c
@@ -33,7 +33,7 @@ DEFINE_PER_CPU(struct tick_device, tick_cpu_device);
  */
 ktime_t tick_next_period;
 ktime_t tick_period;
-int tick_do_timer_cpu __read_mostly = -1;
+int tick_do_timer_cpu __read_mostly = TICK_DO_TIMER_BOOT;
 DEFINE_SPINLOCK(tick_device_lock);
 
 /*
@@ -148,7 +148,7 @@ static void tick_setup_device(struct tick_device *td,
 		 * If no cpu took the do_timer update, assign it to
 		 * this cpu:
 		 */
-		if (tick_do_timer_cpu == -1) {
+		if (tick_do_timer_cpu == TICK_DO_TIMER_BOOT) {
 			tick_do_timer_cpu = cpu;
 			tick_next_period = ktime_get();
 			tick_period = ktime_set(0, NSEC_PER_SEC / HZ);
@@ -300,7 +300,8 @@ static void tick_shutdown(unsigned int *cpup)
 	if (*cpup == tick_do_timer_cpu) {
 		int cpu = first_cpu(cpu_online_map);
 
-		tick_do_timer_cpu = (cpu != NR_CPUS) ? cpu : -1;
+		tick_do_timer_cpu = (cpu != NR_CPUS) ? cpu :
+			TICK_DO_TIMER_NONE;
 	}
 	spin_unlock_irqrestore(&tick_device_lock, flags);
 }
diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h
index 6e9db9734aa6..e18014fadf95 100644
--- a/kernel/time/tick-internal.h
+++ b/kernel/time/tick-internal.h
@@ -1,6 +1,10 @@
 /*
  * tick internal variable and functions used by low/high res code
  */
+
+#define TICK_DO_TIMER_NONE	-1
+#define TICK_DO_TIMER_BOOT	-2
+
 DECLARE_PER_CPU(struct tick_device, tick_cpu_device);
 extern spinlock_t tick_device_lock;
 extern ktime_t tick_next_period;
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index a87b0468568b..31a14e8caac1 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -221,7 +221,7 @@ void tick_nohz_stop_sched_tick(int inidle)
 	 */
 	if (unlikely(!cpu_online(cpu))) {
 		if (cpu == tick_do_timer_cpu)
-			tick_do_timer_cpu = -1;
+			tick_do_timer_cpu = TICK_DO_TIMER_NONE;
 	}
 
 	if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE))
@@ -303,7 +303,7 @@ void tick_nohz_stop_sched_tick(int inidle)
 		 * invoked.
 		 */
 		if (cpu == tick_do_timer_cpu)
-			tick_do_timer_cpu = -1;
+			tick_do_timer_cpu = TICK_DO_TIMER_NONE;
 
 		ts->idle_sleeps++;
 
@@ -468,7 +468,7 @@ static void tick_nohz_handler(struct clock_event_device *dev)
 	 * this duty, then the jiffies update is still serialized by
 	 * xtime_lock.
 	 */
-	if (unlikely(tick_do_timer_cpu == -1))
+	if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE))
 		tick_do_timer_cpu = cpu;
 
 	/* Check, if the jiffies need an update */
@@ -570,7 +570,7 @@ static enum hrtimer_restart tick_sched_timer(struct hrtimer *timer)
 	 * this duty, then the jiffies update is still serialized by
 	 * xtime_lock.
 	 */
-	if (unlikely(tick_do_timer_cpu == -1))
+	if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE))
 		tick_do_timer_cpu = cpu;
 #endif
 
-- 
cgit v1.2.3


From 4faac97d44ac27bdbb010a9c3597401a8f89341f Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Mon, 22 Sep 2008 18:54:29 +0200
Subject: x86: prevent stale state of c1e_mask across CPU offline/online

Impact: hang which happens across CPU offline/online on AMD C1E systems.

When a CPU goes offline then the corresponding bit in the broadcast
mask is cleared. For AMD C1E enabled CPUs we do not reenable the
broadcast when the CPU comes online again as we do not clear the
corresponding bit in the c1e_mask, which keeps track which CPUs
have been switched to broadcast already. So on those !$@#& machines
we never switch back to broadcasting after a CPU offline/online cycle.

Clear the bit when the CPU plays dead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/process.c    | 11 ++++++++---
 arch/x86/kernel/process_32.c |  1 +
 arch/x86/kernel/process_64.c |  2 ++
 include/asm-x86/idle.h       |  2 ++
 4 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 7fc4d5b0a6a0..2e2247117f6e 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -246,6 +246,14 @@ static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c)
 	return 1;
 }
 
+static cpumask_t c1e_mask = CPU_MASK_NONE;
+static int c1e_detected;
+
+void c1e_remove_cpu(int cpu)
+{
+	cpu_clear(cpu, c1e_mask);
+}
+
 /*
  * C1E aware idle routine. We check for C1E active in the interrupt
  * pending message MSR. If we detect C1E, then we handle it the same
@@ -253,9 +261,6 @@ static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c)
  */
 static void c1e_idle(void)
 {
-	static cpumask_t c1e_mask = CPU_MASK_NONE;
-	static int c1e_detected;
-
 	if (need_resched())
 		return;
 
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 3b7a1ddcc0bc..4b3cfdf54216 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -88,6 +88,7 @@ static void cpu_exit_clear(void)
 	cpu_clear(cpu, cpu_callin_map);
 
 	numa_remove_cpu(cpu);
+	c1e_remove_cpu(cpu);
 }
 
 /* We don't actually take CPU down, just spin without interrupts. */
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 71553b664e2a..e12e0e4dd256 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -93,6 +93,8 @@ DECLARE_PER_CPU(int, cpu_state);
 static inline void play_dead(void)
 {
 	idle_task_exit();
+	c1e_remove_cpu(raw_smp_processor_id());
+
 	mb();
 	/* Ack it */
 	__get_cpu_var(cpu_state) = CPU_DEAD;
diff --git a/include/asm-x86/idle.h b/include/asm-x86/idle.h
index d240e5b30a45..cbb649123612 100644
--- a/include/asm-x86/idle.h
+++ b/include/asm-x86/idle.h
@@ -10,4 +10,6 @@ void idle_notifier_register(struct notifier_block *n);
 void enter_idle(void);
 void exit_idle(void);
 
+void c1e_remove_cpu(int cpu);
+
 #endif
-- 
cgit v1.2.3


From 49d670fb8dd62d3ed4e3ed2513538ea65b051aed Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Mon, 22 Sep 2008 18:56:01 +0200
Subject: clockevents: prevent stale tick_next_period for onlining CPUs

Impact: possible hang on CPU onlining in timer one shot mode.

The tick_next_period variable is only used during boot on nohz/highres
enabled systems, but for CPU onlining it needs to be maintained when
the per cpu clock events device operates in one shot mode.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 kernel/time/tick-sched.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 31a14e8caac1..39019b3f7621 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -75,6 +75,9 @@ static void tick_do_update_jiffies64(ktime_t now)
 							   incr * ticks);
 		}
 		do_timer(++ticks);
+
+		/* Keep the tick_next_period variable up to date */
+		tick_next_period = ktime_add(last_jiffies_update, tick_period);
 	}
 	write_sequnlock(&xtime_lock);
 }
-- 
cgit v1.2.3


From 302745699c1b675b5d2a1af87271de10e4d96b6a Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Mon, 22 Sep 2008 19:02:25 +0200
Subject: clockevents: check broadcast device not tick device

Impact: Possible hang on CPU online observed on AMD C1E machines.

The broadcast setup code looks at the mode of the tick device to
determine whether it needs to be shut down or setup. This is wrong
when the broadcast mode is set to one shot already. This can happen
when a CPU is brought online as it goes through the periodic setup
first.

The problem went unnoticed as sane systems do not call into that code
before the switch to one shot for the clock event device happens.
The AMD C1E idle routine switches over immediately and thereby shuts
down the just setup device before the first interrupt happens.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 kernel/time/tick-broadcast.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index f1f3eee28113..e2b66d1c8ca5 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -235,7 +235,7 @@ static void tick_do_broadcast_on_off(void *why)
 	case CLOCK_EVT_NOTIFY_BROADCAST_FORCE:
 		if (!cpu_isset(cpu, tick_broadcast_mask)) {
 			cpu_set(cpu, tick_broadcast_mask);
-			if (td->mode == TICKDEV_MODE_PERIODIC)
+			if (bc->mode == TICKDEV_MODE_PERIODIC)
 				clockevents_shutdown(dev);
 		}
 		if (*reason == CLOCK_EVT_NOTIFY_BROADCAST_FORCE)
@@ -245,7 +245,7 @@ static void tick_do_broadcast_on_off(void *why)
 		if (!tick_broadcast_force &&
 		    cpu_isset(cpu, tick_broadcast_mask)) {
 			cpu_clear(cpu, tick_broadcast_mask);
-			if (td->mode == TICKDEV_MODE_PERIODIC)
+			if (bc->mode == TICKDEV_MODE_PERIODIC)
 				tick_setup_periodic(dev, 0);
 		}
 		break;
-- 
cgit v1.2.3


From 27ce4cb4a0c7cf59b9a9952266883862f2e4c99f Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Mon, 22 Sep 2008 19:04:02 +0200
Subject: clockevents: prevent mode mismatch on cpu online

Impact: timer hang on CPU online observed on AMD C1E systems

When a CPU is brought online then the broadcast machinery can
be in the one shot state already. Check this and setup the timer
device of the new CPU in one shot mode so the broadcast code
can pick up the next_event value correctly.

Another AMD C1E oddity, as we switch to broadcast immediately and
not after the full bring up via the ACPI cpu idle code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 kernel/time/tick-broadcast.c | 8 ++++++++
 kernel/time/tick-common.c    | 3 ++-
 kernel/time/tick-internal.h  | 2 ++
 3 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index e2b66d1c8ca5..bd7034542399 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -575,4 +575,12 @@ void tick_shutdown_broadcast_oneshot(unsigned int *cpup)
 	spin_unlock_irqrestore(&tick_broadcast_lock, flags);
 }
 
+/*
+ * Check, whether the broadcast device is in one shot mode
+ */
+int tick_broadcast_oneshot_active(void)
+{
+	return tick_broadcast_device.mode == TICKDEV_MODE_ONESHOT;
+}
+
 #endif
diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c
index b523d095decf..df12434b43ca 100644
--- a/kernel/time/tick-common.c
+++ b/kernel/time/tick-common.c
@@ -109,7 +109,8 @@ void tick_setup_periodic(struct clock_event_device *dev, int broadcast)
 	if (!tick_device_is_functional(dev))
 		return;
 
-	if (dev->features & CLOCK_EVT_FEAT_PERIODIC) {
+	if ((dev->features & CLOCK_EVT_FEAT_PERIODIC) &&
+	    !tick_broadcast_oneshot_active()) {
 		clockevents_set_mode(dev, CLOCK_EVT_MODE_PERIODIC);
 	} else {
 		unsigned long seq;
diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h
index e18014fadf95..55c3f4be6077 100644
--- a/kernel/time/tick-internal.h
+++ b/kernel/time/tick-internal.h
@@ -35,6 +35,7 @@ extern void tick_broadcast_oneshot_control(unsigned long reason);
 extern void tick_broadcast_switch_to_oneshot(void);
 extern void tick_shutdown_broadcast_oneshot(unsigned int *cpup);
 extern int tick_resume_broadcast_oneshot(struct clock_event_device *bc);
+extern int tick_broadcast_oneshot_active(void);
 # else /* BROADCAST */
 static inline void tick_broadcast_setup_oneshot(struct clock_event_device *bc)
 {
@@ -43,6 +44,7 @@ static inline void tick_broadcast_setup_oneshot(struct clock_event_device *bc)
 static inline void tick_broadcast_oneshot_control(unsigned long reason) { }
 static inline void tick_broadcast_switch_to_oneshot(void) { }
 static inline void tick_shutdown_broadcast_oneshot(unsigned int *cpup) { }
+static inline int tick_broadcast_oneshot_active(void) { return 0; }
 # endif /* !BROADCAST */
 
 #else /* !ONESHOT */
-- 
cgit v1.2.3


From a8d6829044901a67732904be5f1eacdf8539604f Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Mon, 22 Sep 2008 19:02:25 +0200
Subject: x86: prevent C-states hang on AMD C1E enabled machines

Impact: System hang when AMD C1E machines switch into C2/C3

AMD C1E enabled systems do not work with normal ACPI C-states
even if the BIOS is advertising them. Limit the C-states to
C1 for the ACPI processor idle code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/process.c    | 1 +
 include/asm-x86/acpi.h       | 2 ++
 include/asm-x86/cpufeature.h | 1 +
 3 files changed, 4 insertions(+)

diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 2e2247117f6e..d8c2a299bfe5 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -272,6 +272,7 @@ static void c1e_idle(void)
 			c1e_detected = 1;
 			mark_tsc_unstable("TSC halt in C1E");
 			printk(KERN_INFO "System has C1E enabled\n");
+			set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E);
 		}
 	}
 
diff --git a/include/asm-x86/acpi.h b/include/asm-x86/acpi.h
index 635d764dc13e..35d1743b57ac 100644
--- a/include/asm-x86/acpi.h
+++ b/include/asm-x86/acpi.h
@@ -140,6 +140,8 @@ static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate)
 	    boot_cpu_data.x86_model <= 0x05 &&
 	    boot_cpu_data.x86_mask < 0x0A)
 		return 1;
+	else if (boot_cpu_has(X86_FEATURE_AMDC1E))
+		return 1;
 	else
 		return max_cstate;
 }
diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h
index 9489283a4bcf..cfcfb0a806ba 100644
--- a/include/asm-x86/cpufeature.h
+++ b/include/asm-x86/cpufeature.h
@@ -81,6 +81,7 @@
 #define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */
 #define X86_FEATURE_11AP	(3*32+19) /* Bad local APIC aka 11AP */
 #define X86_FEATURE_NOPL	(3*32+20) /* The NOPL (0F 1F) instructions */
+#define X86_FEATURE_AMDC1E	(3*32+21) /* AMD C1E detected */
 
 /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
 #define X86_FEATURE_XMM3	(4*32+ 0) /* Streaming SIMD Extensions-3 */
-- 
cgit v1.2.3


From 09bfeea13cea843fb03eaa96b5d891fa0abdcc90 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Thu, 18 Sep 2008 21:12:10 +0200
Subject: x86: c1e_idle: don't mark TSC unstable if CPU has invariant TSC

Impact: Functional TSC is marked unstable on AMD family 0x10 and 0x11 CPUs.

This would be wrong because for those CPUs "invariant TSC" means:

   "The TSC counts at the same rate in all P-states, all C states, S0,
   or S1"

(See "Processor BIOS and Kernel Developer's Guides" for those CPUs.)

[ tglx: Changed C1E to AMD C1E in the printks to avoid confusion
	with Intel C1E ]

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/process.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index d8c2a299bfe5..876e91890777 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -270,8 +270,9 @@ static void c1e_idle(void)
 		rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi);
 		if (lo & K8_INTP_C1E_ACTIVE_MASK) {
 			c1e_detected = 1;
-			mark_tsc_unstable("TSC halt in C1E");
-			printk(KERN_INFO "System has C1E enabled\n");
+			if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+				mark_tsc_unstable("TSC halt in AMD C1E");
+			printk(KERN_INFO "System has AMD C1E enabled\n");
 			set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E);
 		}
 	}
-- 
cgit v1.2.3


From f8e256c687eb53850685747757c8d75e58756e15 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 23 Sep 2008 13:00:57 +0200
Subject: timers: fix build error in !oneshot case
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

 kernel/time/tick-common.c: In function ‘tick_setup_periodic’:
 kernel/time/tick-common.c:113: error: implicit declaration of function ‘tick_broadcast_oneshot_active’

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/time/tick-internal.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h
index 55c3f4be6077..469248782c23 100644
--- a/kernel/time/tick-internal.h
+++ b/kernel/time/tick-internal.h
@@ -74,6 +74,7 @@ static inline int tick_resume_broadcast_oneshot(struct clock_event_device *bc)
 {
 	return 0;
 }
+static inline int tick_broadcast_oneshot_active(void) { return 0; }
 #endif /* !TICK_ONESHOT */
 
 /*
-- 
cgit v1.2.3


From b0b8daf7849cc98217ca018fbe82c61cd2b735bc Mon Sep 17 00:00:00 2001
From: Liam Girdwood <lrg@kernel.org>
Date: Thu, 18 Sep 2008 14:36:37 +0100
Subject: ALSA: ASoC: maintainers - update email address for Liam Girdwood

This patch updates the maintainers email address for Liam Girdwood and
adds a URL for the ASoC website.

Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 MAINTAINERS | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 28c69aaefcd9..657e0ffe2df5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3826,11 +3826,12 @@ S:	Maintained
 
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT
 P:	Liam Girdwood
-M:	liam.girdwood@wolfsonmicro.com
+M:	lrg@slimlogic.co.uk
 P:	Mark Brown
 M:	broonie@opensource.wolfsonmicro.com
 T:	git opensource.wolfsonmicro.com/linux-2.6-asoc
 L:	alsa-devel@alsa-project.org (subscribers-only)
+W:	http://alsa-project.org/main/index.php/ASoC
 S:	Supported
 
 SPI SUBSYSTEM
-- 
cgit v1.2.3


From 683f40d7e7eee06811db43cb4c45349eab0d539e Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Mon, 22 Sep 2008 13:57:41 -0700
Subject: ibmasr: remove unnecessary spin_unlock()

__asr_toggle() is always called with asr_lock held.
But there is unnecessary spin_unlock() call in __asr_toggle().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Andrey Panin <pazke@donpac.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/watchdog/ibmasr.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/watchdog/ibmasr.c b/drivers/watchdog/ibmasr.c
index b82405cfb4cd..89fcefcc8510 100644
--- a/drivers/watchdog/ibmasr.c
+++ b/drivers/watchdog/ibmasr.c
@@ -85,7 +85,6 @@ static void __asr_toggle(void)
 
 	outb(reg & ~asr_toggle_mask, asr_write_addr);
 	reg = inb(asr_read_addr);
-	spin_unlock(&asr_lock);
 }
 
 static void asr_toggle(void)
-- 
cgit v1.2.3


From c32a162fd420fe8dfb049db941b2438061047fcc Mon Sep 17 00:00:00 2001
From: "Kirill A. Shutemov" <kirill@shutemov.name>
Date: Mon, 22 Sep 2008 13:57:43 -0700
Subject: smb.h: do not include linux/time.h in userspace

linux/time.h conflicts with time.h from glibc

It breaks building smbmount from samba.  It's regression introduced by
commit 76308da (" smb.h: uses struct timespec but didn't include
linux/time.h").

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: <stable@kernel.org>             [2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/smb.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/smb.h b/include/linux/smb.h
index caa43b2370cb..82fefddc5987 100644
--- a/include/linux/smb.h
+++ b/include/linux/smb.h
@@ -11,7 +11,9 @@
 
 #include <linux/types.h>
 #include <linux/magic.h>
+#ifdef __KERNEL__
 #include <linux/time.h>
+#endif
 
 enum smb_protocol { 
 	SMB_PROTOCOL_NONE, 
-- 
cgit v1.2.3


From 39f00c087d31f668eb6eaf97508af22a32c5b1d9 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Mon, 22 Sep 2008 13:57:44 -0700
Subject: kernel-doc: allow structs whose members are all private

Struct members may be marked as private by using
	/* private: */
before them, as noted in Documentation/kernel-doc-nano-HOWTO.txt

Fix kernel-doc to handle structs whose members are all private;
otherwise invalid XML is generated:

xmlto: input does not validate (status 3)
linux-2.6.27-rc6-git4/Documentation/DocBook/debugobjects.xml:146: element variablelist: validity error : Element variablelist content does not follow the DTD, expecting ((title , titleabbrev?)? , varlistentry+), got ()
Document linux-2.6.27-rc6-git4/Documentation/DocBook/debugobjects.xml does not validate
make[1]: *** [Documentation/DocBook/debugobjects.html] Error 3

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Reported-by: Roland McGrath <roland@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/kernel-doc | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index ff787e6ff8ed..44ee94d2ab76 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -781,6 +781,7 @@ sub output_struct_xml(%) {
     print " <refsect1>\n";
     print "  <title>Members</title>\n";
 
+    if ($#{$args{'parameterlist'}} >= 0) {
     print "  <variablelist>\n";
     foreach $parameter (@{$args{'parameterlist'}}) {
       ($parameter =~ /^#/) && next;
@@ -798,6 +799,9 @@ sub output_struct_xml(%) {
       print "    </varlistentry>\n";
     }
     print "  </variablelist>\n";
+    } else {
+	print " <para>\n  None\n </para>\n";
+    }
     print " </refsect1>\n";
 
     output_section_xml(@_);
-- 
cgit v1.2.3


From f9092f358bc2ec5367621478811f046f82873376 Mon Sep 17 00:00:00 2001
From: Jonathan Steel <jon.steel@esentire.com>
Date: Mon, 22 Sep 2008 13:57:45 -0700
Subject: kexec: fix segmentation fault in kimage_add_entry

A segmentation fault can occur in kimage_add_entry in kexec.c when loading
a kernel image into memory.  The fault occurs because a page is requested
by calling kimage_alloc_page with gfp_mask GFP_KERNEL and the function may
actually return a page with gfp_mask GFP_HIGHUSER.  The high mem page is
returned because it was swapped with the kernel page due to the kernel
page being a page that will shortly be copied to.

This patch ensures that kimage_alloc_page returns a page that was created
with the correct gfp flags.

I have verified the change and fixed the whitespace damage of the original
patch.  Jonathan did a great job of tracking this down after he hit the
problem.  -- Eric

Signed-off-by: Jonathan Steel <jon.steel@esentire.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/kexec.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/kernel/kexec.c b/kernel/kexec.c
index 59f3f0df35d4..aef265325cd3 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -753,8 +753,14 @@ static struct page *kimage_alloc_page(struct kimage *image,
 			*old = addr | (*old & ~PAGE_MASK);
 
 			/* The old page I have found cannot be a
-			 * destination page, so return it.
+			 * destination page, so return it if it's
+			 * gfp_flags honor the ones passed in.
 			 */
+			if (!(gfp_mask & __GFP_HIGHMEM) &&
+			    PageHighMem(old_page)) {
+				kimage_free_pages(old_page);
+				continue;
+			}
 			addr = old_addr;
 			page = old_page;
 			break;
-- 
cgit v1.2.3


From 6675ce13ed783f88ea5d82f0d855462b76ff0dad Mon Sep 17 00:00:00 2001
From: Marin Mitov <mitov@issp.bas.bg>
Date: Mon, 22 Sep 2008 13:57:46 -0700
Subject: Documentation/DMA-mapping.txt: update for pci_dma_mapping_error()
 changes

Make the example code consistent with changed API.

Signed-off-by: Marin Mitov <mitov@ispp.bas.bg>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/DMA-mapping.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt
index b463ecd0c7ce..c74fec8c2351 100644
--- a/Documentation/DMA-mapping.txt
+++ b/Documentation/DMA-mapping.txt
@@ -740,7 +740,7 @@ failure can be determined by:
 	dma_addr_t dma_handle;
 
 	dma_handle = pci_map_single(pdev, addr, size, direction);
-	if (pci_dma_mapping_error(dma_handle)) {
+	if (pci_dma_mapping_error(pdev, dma_handle)) {
 		/*
 		 * reduce current DMA mapping usage,
 		 * delay and try again later or
-- 
cgit v1.2.3


From 2d4c8266774188cda7f7e612e6dfb8ad12c579d5 Mon Sep 17 00:00:00 2001
From: Michael Kerrisk <mtk.manpages@googlemail.com>
Date: Mon, 22 Sep 2008 13:57:49 -0700
Subject: sys_paccept: disable paccept() until API design is resolved

The reasons for disabling paccept() are as follows:

* The API is more complex than needed.  There is AFAICS no demonstrated
  use case that the sigset argument of this syscall serves that couldn't
  equally be served by the use of pselect/ppoll/epoll_pwait + traditional
  accept().  Roland seems to concur with this opinion
  (http://thread.gmane.org/gmane.linux.kernel/723953/focus=732255).  I
  have (more than once) asked Ulrich to explain otherwise
  (http://thread.gmane.org/gmane.linux.kernel/723952/focus=731018), but he
  does not respond, so one is left to assume that he doesn't know of such
  a case.

* The use of a sigset argument is not consistent with other I/O APIs
  that can block on a single file descriptor (e.g., read(), recv(),
  connect()).

* The behavior of paccept() when interrupted by a signal is IMO strange:
  the kernel restarts the system call if SA_RESTART was set for the
  handler.  I think that it should not do this -- that it should behave
  consistently with paccept()/ppoll()/epoll_pwait(), which never restart,
  regardless of SA_RESTART.  The reasoning here is that the very purpose
  of paccept() is to wait for a connection or a signal, and that
  restarting in the latter case is probably never useful.  (Note: Roland
  disagrees on this point, believing that rather paccept() should be
  consistent with accept() in its behavior wrt EINTR
  (http://thread.gmane.org/gmane.linux.kernel/723953/focus=732255).)

I believe that instead, a simpler API, consistent with Ulrich's other
recent additions, is preferable:

accept4(int fd, struct sockaddr *sa, socklen_t *salen, ind flags);

(This simpler API was originally proposed by Ulrich:
http://thread.gmane.org/gmane.linux.network/92072)

If this simpler API is added, then if we later decide that the sigset
argument really is required, then a suitable bit in 'flags' could be added
to indicate the presence of the sigset argument.

At this point, I am hoping we either will get a counter-argument from
Ulrich about why we really do need paccept()'s sigset argument, or that he
will resubmit the original accept4() patch.

Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Alan Cox <alan@redhat.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 net/socket.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/socket.c b/net/socket.c
index 8ef8ba81b9e2..3e8d4e35c08f 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -1511,6 +1511,7 @@ out_fd:
 	goto out_put;
 }
 
+#if 0
 #ifdef HAVE_SET_RESTORE_SIGMASK
 asmlinkage long sys_paccept(int fd, struct sockaddr __user *upeer_sockaddr,
 			    int __user *upeer_addrlen,
@@ -1564,6 +1565,7 @@ asmlinkage long sys_paccept(int fd, struct sockaddr __user *upeer_sockaddr,
 	return do_accept(fd, upeer_sockaddr, upeer_addrlen, flags);
 }
 #endif
+#endif
 
 asmlinkage long sys_accept(int fd, struct sockaddr __user *upeer_sockaddr,
 			   int __user *upeer_addrlen)
-- 
cgit v1.2.3


From db203d53d474aa068984e409d807628f5841da1b Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Mon, 22 Sep 2008 13:57:50 -0700
Subject: mm: tiny-shmem fix lock ordering: mmap_sem vs i_mutex

tiny-shmem calls do_truncate in shmem_file_setup.  do_truncate takes
i_mutex, and shmem_file_setup is called with mmap_sem held.  However
i_mutex nests outside mmap_sem.

Copy the code in shmem.c to avoid this problem.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reported-and-tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/tiny-shmem.c | 24 +++++++++---------------
 1 file changed, 9 insertions(+), 15 deletions(-)

diff --git a/mm/tiny-shmem.c b/mm/tiny-shmem.c
index ae532f501943..d17cb6f6ab10 100644
--- a/mm/tiny-shmem.c
+++ b/mm/tiny-shmem.c
@@ -65,31 +65,25 @@ struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags)
 	if (!dentry)
 		goto put_memory;
 
-	error = -ENOSPC;
-	inode = ramfs_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0);
-	if (!inode)
-		goto put_dentry;
-
-	d_instantiate(dentry, inode);
 	error = -ENFILE;
-	file = alloc_file(shm_mnt, dentry, FMODE_WRITE | FMODE_READ,
-			&ramfs_file_operations);
+	file = get_empty_filp();
 	if (!file)
 		goto put_dentry;
 
-	inode->i_nlink = 0;	/* It is unlinked */
-
-	/* notify everyone as to the change of file size */
-	error = do_truncate(dentry, size, 0, file);
-	if (error < 0)
+	error = -ENOSPC;
+	inode = ramfs_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0);
+	if (!inode)
 		goto close_file;
 
+	d_instantiate(dentry, inode);
+	inode->i_size = size;
+	inode->i_nlink = 0;	/* It is unlinked */
+	init_file(file, shm_mnt, dentry, FMODE_WRITE | FMODE_READ,
+			&ramfs_file_operations);
 	return file;
 
 close_file:
 	put_filp(file);
-	return ERR_PTR(error);
-
 put_dentry:
 	dput(dentry);
 put_memory:
-- 
cgit v1.2.3


From b4d19cc84e8e6838f4aa0b26b3afcdc8c7f71505 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Mon, 22 Sep 2008 13:57:51 -0700
Subject: Documentation/sysctl/kernel.txt: fix softlockup_thresh description

- s/s/seconds/

- s/10 seconds/60 seconds/

- Mention the zero-disables-it feature.

Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/sysctl/kernel.txt | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index 276a7e637822..e1ff0d920a5c 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -351,9 +351,10 @@ kernel.  This value defaults to SHMMAX.
 
 softlockup_thresh:
 
-This value can be used to lower the softlockup tolerance
-threshold. The default threshold is 10s.  If a cpu is locked up
-for 10s, the kernel complains.  Valid values are 1-60s.
+This value can be used to lower the softlockup tolerance threshold.  The
+default threshold is 60 seconds.  If a cpu is locked up for 60 seconds,
+the kernel complains.  Valid values are 1-60 seconds.  Setting this
+tunable to zero will disable the softlockup detection altogether.
 
 ==============================================================
 
-- 
cgit v1.2.3


From a10cebf56ca7e7c034d1b6646230c6553e478967 Mon Sep 17 00:00:00 2001
From: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Date: Mon, 22 Sep 2008 13:57:52 -0700
Subject: memcg: check under limit at shrink_usage

Current memory cgroup(both in mainline and -mm) doesn't account swap
caches as memory(swap cache support is dropped temporarily now).

So try_to_free_mem_cgroup_pages doesn't reflect the count of pages that
have been moved to swap cache.

But this makes mem_cgroup_shrink_usage fail easily if most of the pages
are anon/shmem, and then shmem_getpage returns -ENOMEM and the process
will be killed.

This patch adds res_counter_check_under_limit to avoid these cases.

BTW, even if swap cache support is enabled again, if a process is moved to
another cgroup, which has been just made, between precharge and
shrink_usage in shmem_getpage, shrink_usage may fail just because there is
no pages to reclaim.

So this change would make sense anyway.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memcontrol.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 0f1f7a7374ba..c0500e4d3a2f 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -806,6 +806,7 @@ int mem_cgroup_shrink_usage(struct mm_struct *mm, gfp_t gfp_mask)
 
 	do {
 		progress = try_to_free_mem_cgroup_pages(mem, gfp_mask);
+		progress += res_counter_check_under_limit(&mem->res);
 	} while (!progress && --retry);
 
 	css_put(&mem->css);
-- 
cgit v1.2.3


From f05596dbc922276ed675c713519220bae8042e32 Mon Sep 17 00:00:00 2001
From: Anti Sullin <anti.sullin@artecdesign.ee>
Date: Mon, 22 Sep 2008 13:57:54 -0700
Subject: atmel_serial: update the powersave handler to match serial core

This problem seems to be unnoticed so far:

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=b3b708fa2780cd2b5d8266a8f0c3a1cab364d4d2

has changed the serial core behavior to not to suspend the port if the
device is enabled as a wakeup source.  If the AT91 system goes to slow
clock mode, the port should be suspended always and the clocks should be
switched off.  The patch attached updates the atmel_serial driver to match
the changes in serial core.

Also, the interrupts are disabled when the clock is disabled.  If we
disable the clock with interrupts enabled, an interrupt may get stuck.  If
this is the DBGU interrupt, this blocks the OR logic at system controller
and thus all other sysc interrupts.

Signed-off-by: Anti Sullin <anti.sullin@artecdesign.ee>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Michael Trimarchi <trimarchimichael@yahoo.it>
Cc: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/atmel_serial.c | 32 +++++++++++++++++++-------------
 1 file changed, 19 insertions(+), 13 deletions(-)

diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 3a6da80b081c..61fb8b6d19af 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -131,7 +131,8 @@ struct atmel_uart_char {
 struct atmel_uart_port {
 	struct uart_port	uart;		/* uart */
 	struct clk		*clk;		/* uart clock */
-	unsigned short		suspended;	/* is port suspended? */
+	int			may_wakeup;	/* cached value of device_may_wakeup for times we need to disable it */
+	u32			backup_imr;	/* IMR saved during suspend */
 	int			break_active;	/* break being received */
 
 	short			use_dma_rx;	/* enable PDC receiver */
@@ -984,8 +985,15 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state,
 		 * This is called on uart_open() or a resume event.
 		 */
 		clk_enable(atmel_port->clk);
+
+		/* re-enable interrupts if we disabled some on suspend */
+		UART_PUT_IER(port, atmel_port->backup_imr);
 		break;
 	case 3:
+		/* Back up the interrupt mask and disable all interrupts */
+		atmel_port->backup_imr = UART_GET_IMR(port);
+		UART_PUT_IDR(port, -1);
+
 		/*
 		 * Disable the peripheral clock for this serial port.
 		 * This is called on uart_close() or a suspend event.
@@ -1475,13 +1483,12 @@ static int atmel_serial_suspend(struct platform_device *pdev,
 			cpu_relax();
 	}
 
-	if (device_may_wakeup(&pdev->dev)
-	    && !atmel_serial_clk_will_stop())
-		enable_irq_wake(port->irq);
-	else {
-		uart_suspend_port(&atmel_uart, port);
-		atmel_port->suspended = 1;
-	}
+	/* we can not wake up if we're running on slow clock */
+	atmel_port->may_wakeup = device_may_wakeup(&pdev->dev);
+	if (atmel_serial_clk_will_stop())
+		device_set_wakeup_enable(&pdev->dev, 0);
+
+	uart_suspend_port(&atmel_uart, port);
 
 	return 0;
 }
@@ -1491,11 +1498,8 @@ static int atmel_serial_resume(struct platform_device *pdev)
 	struct uart_port *port = platform_get_drvdata(pdev);
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 
-	if (atmel_port->suspended) {
-		uart_resume_port(&atmel_uart, port);
-		atmel_port->suspended = 0;
-	} else
-		disable_irq_wake(port->irq);
+	uart_resume_port(&atmel_uart, port);
+	device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup);
 
 	return 0;
 }
@@ -1513,6 +1517,8 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev)
 	BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE));
 
 	port = &atmel_ports[pdev->id];
+	port->backup_imr = 0;
+
 	atmel_init_port(port, pdev);
 
 	if (!atmel_use_dma_rx(&port->uart)) {
-- 
cgit v1.2.3


From 44ea91c597ae4641d9ac21b8bbba0795d2f4261e Mon Sep 17 00:00:00 2001
From: James Bottomley <James.Bottomley@HansenPartnership.com>
Date: Sat, 20 Sep 2008 00:31:50 +0000
Subject: [SCSI] Fix hang with split requests

Sometimes, particularly for USB devices with the last sector bug,
requests get completed in chunks.  There's a bug in this in that if
one of the chunks gets an error, we complete that chunk with an error
but never move on to the remaining ones, leading to the request
hanging (because it's not fully completed).

Fix this by completing all remaining chunks if an error is encountered.

Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/scsi_lib.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index ff5d56b3ee4d..62307bd794a9 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -852,7 +852,7 @@ static void scsi_end_bidi_request(struct scsi_cmnd *cmd)
 void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 {
 	int result = cmd->result;
-	int this_count = scsi_bufflen(cmd);
+	int this_count;
 	struct request_queue *q = cmd->device->request_queue;
 	struct request *req = cmd->request;
 	int error = 0;
@@ -908,6 +908,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 	 */
 	if (scsi_end_request(cmd, error, good_bytes, result == 0) == NULL)
 		return;
+	this_count = blk_rq_bytes(req);
 
 	/* good_bytes = 0, or (inclusive) there were leftovers and
 	 * result = 0, so scsi_end_request couldn't retry.
-- 
cgit v1.2.3


From c9bab96bbfdda59fa8a35ba536c22e66055669e5 Mon Sep 17 00:00:00 2001
From: Kevin Lloyd <klloyd@sierrawireless.com>
Date: Tue, 26 Aug 2008 18:30:45 -0700
Subject: USB Storage: Sierra: Non-configurable TRU-Install

This patch alters the Sierra Mass Storage patch so that it is non-configurable.

Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/storage/Kconfig        | 12 ------------
 drivers/usb/storage/Makefile       |  3 +--
 drivers/usb/storage/unusual_devs.h |  2 --
 drivers/usb/storage/usb.c          |  2 --
 4 files changed, 1 insertion(+), 18 deletions(-)

diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index c76034672c18..3d9249632ae1 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -146,18 +146,6 @@ config USB_STORAGE_KARMA
 	  on the resulting scsi device node returns the Karma to normal
 	  operation.
 
-config USB_STORAGE_SIERRA
-	bool "Sierra Wireless TRU-Install Feature Support"
-	depends on USB_STORAGE
-	help
-	  Say Y here to include additional code to support Sierra Wireless
-	  products with the TRU-Install feature (e.g., AC597E, AC881U).
-
-	  This code switches the Sierra Wireless device from being in
-	  Mass Storage mode to Modem mode. It also has the ability to
-	  support host software upgrades should full Linux support be added
-	  to TRU-Install.
-
 config USB_STORAGE_CYPRESS_ATACB
 	bool "SAT emulation on Cypress USB/ATA Bridge with ATACB"
 	depends on USB_STORAGE
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index bc3415b475c9..7f8beb5366ae 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -21,11 +21,10 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT)	+= jumpshot.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA)	+= alauda.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH)	+= onetouch.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA)	+= karma.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_SIERRA)	+= sierra_ms.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o
 
 usb-storage-objs :=	scsiglue.o protocol.o transport.o usb.o \
-			initializers.o $(usb-storage-obj-y)
+			initializers.o sierra_ms.o $(usb-storage-obj-y)
 
 ifneq ($(CONFIG_USB_LIBUSUAL),)
 	obj-$(CONFIG_USB)	+= libusual.o
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index ba412e68d474..0d44f7c11b72 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1576,7 +1576,6 @@ UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		0),
 
-#ifdef CONFIG_USB_STORAGE_SIERRA
 /* Reported by Kevin Lloyd <linux@sierrawireless.com>
  * Entry is needed for the initializer function override,
  * which instructs the device to load as a modem
@@ -1587,7 +1586,6 @@ UNUSUAL_DEV(  0x1199, 0x0fff, 0x0000, 0x9999,
 		"USB MMC Storage",
 		US_SC_DEVICE, US_PR_DEVICE, sierra_ms_init,
 		0),
-#endif
 
 /* Reported by Jaco Kroon <jaco@kroon.co.za>
  * The usb-storage module found on the Digitech GNX4 (and supposedly other
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 73679aa506de..27016fd2cad1 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -102,9 +102,7 @@
 #ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
 #include "cypress_atacb.h"
 #endif
-#ifdef CONFIG_USB_STORAGE_SIERRA
 #include "sierra_ms.h"
-#endif
 
 /* Some informational data */
 MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
-- 
cgit v1.2.3


From 73b2c2057579314c4fea1a37e35a501fbb8b9916 Mon Sep 17 00:00:00 2001
From: Kevin Lloyd <klloyd@sierrawireless.com>
Date: Mon, 25 Aug 2008 19:20:40 -0700
Subject: USB Serial: Sierra: Device addition & version rev

This patch adds devices to the sierra driver and rev's the driver version.

Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/sierra.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 706033753adb..396f099ba9f8 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -14,7 +14,7 @@
   Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
 */
 
-#define DRIVER_VERSION "v.1.2.13a"
+#define DRIVER_VERSION "v.1.3.2"
 #define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>"
 #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
 
@@ -30,9 +30,6 @@
 
 #define SWIMS_USB_REQUEST_SetPower	0x00
 #define SWIMS_USB_REQUEST_SetNmea	0x07
-#define SWIMS_USB_REQUEST_SetMode	0x0B
-#define SWIMS_USB_REQUEST_GetSwocInfo	0x0A
-#define SWIMS_SET_MODE_Modem		0x0001
 
 /* per port private data */
 #define N_IN_URB	4
@@ -175,6 +172,8 @@ static struct usb_device_id id_table [] = {
 	 /* Sierra Wireless Device */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) },
 	{ USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless Device */
+	{ USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless Device */
+	{ USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless Device */
 
 	{ USB_DEVICE(0x1199, 0x6802) },	/* Sierra Wireless MC8755 */
 	{ USB_DEVICE(0x1199, 0x6804) },	/* Sierra Wireless MC8755 */
@@ -204,6 +203,8 @@ static struct usb_device_id id_table [] = {
 	/* Sierra Wireless Device */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)},
 	/* Sierra Wireless Device */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6891, 0xFF, 0xFF, 0xFF)},
+	/* Sierra Wireless Device */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
 
 	{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
-- 
cgit v1.2.3


From 0bcfeb3ec9467a8dfae3e906925ec28fe788afcf Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Tue, 26 Aug 2008 14:43:46 -0700
Subject: USB: ehci: fix some ehci hangs and crashes

I noticed that the "Refactor "if (handshake()) state = HC_STATE_HALT"
patch from earlier this year perpetuated a potential problem:  it can
mark the controller as halted when it's still running (but not acting
as, perhaps wrongly, expected).

That caused some hangs and crashes, rather than more polite failure
modes of a truly halted controller.  This patch forces a true halt,
and emits a (previously missing) diagnostic.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/host/ehci-hcd.c | 26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index d9d53f289caf..8409e0705d63 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -145,16 +145,6 @@ static int handshake (struct ehci_hcd *ehci, void __iomem *ptr,
 	return -ETIMEDOUT;
 }
 
-static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr,
-				       u32 mask, u32 done, int usec)
-{
-	int error = handshake(ehci, ptr, mask, done, usec);
-	if (error)
-		ehci_to_hcd(ehci)->state = HC_STATE_HALT;
-
-	return error;
-}
-
 /* force HC to halt state from unknown (EHCI spec section 2.3) */
 static int ehci_halt (struct ehci_hcd *ehci)
 {
@@ -173,6 +163,22 @@ static int ehci_halt (struct ehci_hcd *ehci)
 			  STS_HALT, STS_HALT, 16 * 125);
 }
 
+static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr,
+				       u32 mask, u32 done, int usec)
+{
+	int error;
+
+	error = handshake(ehci, ptr, mask, done, usec);
+	if (error) {
+		ehci_halt(ehci);
+		ehci_to_hcd(ehci)->state = HC_STATE_HALT;
+		ehci_err(ehci, "force halt; handhake %p %08x %08x -> %d\n",
+			ptr, mask, done, error);
+	}
+
+	return error;
+}
+
 /* put TDI/ARC silicon into EHCI mode */
 static void tdi_reset (struct ehci_hcd *ehci)
 {
-- 
cgit v1.2.3


From 0a4d7f45ac173862796eb81942afc843d6244798 Mon Sep 17 00:00:00 2001
From: Richard Nauber <RichardNauber@web.de>
Date: Tue, 26 Aug 2008 23:34:11 +0200
Subject: USB: Fix the Nokia 6300 storage-mode.

This patch fixes that behavior:

...
Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current]
Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0
Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current]
Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0
Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current]
Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0
Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current]
...


cat  /proc/bus/usb/devices
...
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0421 ProdID=04fa Rev= 6.01
S:  Manufacturer=Nokia
S:  Product=Nokia 6300
S:  SerialNumber=35XXXXXXXX
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
...

From: Richard Nauber <RichardNauber@web.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/storage/unusual_devs.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 0d44f7c11b72..37f45c6c8f7c 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -232,6 +232,13 @@ UNUSUAL_DEV(  0x0421, 0x04b9, 0x0551, 0x0551,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/* Reported by Richard Nauber <RichardNauber@web.de> */
+UNUSUAL_DEV(  0x0421, 0x04fa, 0x0601, 0x0601,
+		"Nokia",
+		"6300",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
 /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
 UNUSUAL_DEV(  0x0424, 0x0fdc, 0x0210, 0x0210,
 		"SMSC",
-- 
cgit v1.2.3


From f8834f1febb8f56cdcfeb35485e0cc7a8d547818 Mon Sep 17 00:00:00 2001
From: Tony Murray <murraytony@gmail.com>
Date: Fri, 22 Aug 2008 17:30:44 -0500
Subject: USB: Correct Sierra Wireless USB EVDO Modem Device ID

I was trying to figure out why my device wasn't supported by the
drivers/usb/serial/sierra.c driver, while looking throught the device
IDs I spotted what I believe to be a typo in the device IDs.  Please
apply the following patch

If you look down further, there is another HP wireless broadband card,
which has a vendor ID of 03f0, like my device.  Below is my "lsusb -v
-d 03f0:1b1d".

Bus 001 Device 005: ID 03f0:1b1d Hewlett-Packard
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x03f0 Hewlett-Packard
  idProduct          0x1b1d
  bcdDevice            0.01
  iManufacturer           1 HP
  iProduct                2 HP ev2200 1xEV-DO Broadband Wireless Module
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           67
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           7
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              3 Data Interface
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0010  1x 16 bytes
        bInterval             128
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x05  EP 5 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
Device Status:     0x0000
  (Bus Powered)

From: Tony Murray <murraytony@gmail.com>
Cc: Kevin Lloyd <klloyd@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/sierra.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 396f099ba9f8..eb87640f362a 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -160,7 +160,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x0017) },	/* Sierra Wireless EM5625 */
 	{ USB_DEVICE(0x1199, 0x0018) },	/* Sierra Wireless MC5720 */
 	{ USB_DEVICE(0x1199, 0x0218) },	/* Sierra Wireless MC5720 */
-	{ USB_DEVICE(0x0f30, 0x1b1d) },	/* Sierra Wireless MC5720 */
+	{ USB_DEVICE(0x03f0, 0x1b1d) }, /* HP ev2200 a.k.a MC5720 */
 	{ USB_DEVICE(0x1199, 0x0020) },	/* Sierra Wireless MC5725 */
 	{ USB_DEVICE(0x1199, 0x0024) },	/* Sierra Wireless MC5727 */
 	{ USB_DEVICE(0x1199, 0x0220) },	/* Sierra Wireless MC5725 */
-- 
cgit v1.2.3


From 83a798207361cc26385187b2e71efa2b5d75de7f Mon Sep 17 00:00:00 2001
From: Geoff Levand <geoffrey.levand@am.sony.com>
Date: Fri, 22 Aug 2008 14:13:00 -0700
Subject: USB: fix hcd interrupt disabling

Commit de85422b94ddb23c021126815ea49414047c13dc, 'USB: fix interrupt
disabling for HCDs with shared interrupt handlers' changed usb_add_hcd()
to strip IRQF_DISABLED from irqflags prior to calling request_irq()
with the justification that such a removal was necessary for shared
interrupts to work properly.  Unfortunately, the change in that commit
unconditionally removes the IRQF_DISABLED flag, causing problems on
platforms that don't use a shared interrupt but require IRQF_DISABLED.
This change adds a check for IRQF_SHARED prior to removing the
IRQF_DISABLED flag.

Fixes the PS3 system startup hang reported with recent Fedora and
OpenSUSE kernels.

Note that this problem is hidden when CONFIG_LOCKDEP=y (ps3_defconfig),
as local_irq_enable_in_hardirq() is defined as a null statement for
that config.

CC: stable <stable@kernel.org>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Stefan Becker <Stefan.Becker@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/core/hcd.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 8abd4e59bf4a..8ab389dca2b9 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1876,7 +1876,8 @@ int usb_add_hcd(struct usb_hcd *hcd,
 		 * with IRQF_SHARED. As usb_hcd_irq() will always disable
 		 * interrupts we can remove it here.
 		 */
-		irqflags &= ~IRQF_DISABLED;
+		if (irqflags & IRQF_SHARED)
+			irqflags &= ~IRQF_DISABLED;
 
 		snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
 				hcd->driver->description, hcd->self.busnum);
-- 
cgit v1.2.3


From 697e04db5678fadf96d437806b676403ebee806d Mon Sep 17 00:00:00 2001
From: Oliver Neukum <oliver@neukum.org>
Date: Tue, 2 Sep 2008 10:52:08 +0200
Subject: USB: update of Documentation/usb/anchors.txt

The extended anchor API is documented

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 Documentation/usb/anchors.txt | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/Documentation/usb/anchors.txt b/Documentation/usb/anchors.txt
index 7304bcf5a306..5e6b64c20d25 100644
--- a/Documentation/usb/anchors.txt
+++ b/Documentation/usb/anchors.txt
@@ -42,9 +42,21 @@ This function kills all URBs associated with an anchor. The URBs
 are called in the reverse temporal order they were submitted.
 This way no data can be reordered.
 
+usb_unlink_anchored_urbs()
+--------------------------
+
+This function unlinks all URBs associated with an anchor. The URBs
+are processed in the reverse temporal order they were submitted.
+This is similar to usb_kill_anchored_urbs(), but it will not sleep.
+Therefore no guarantee is made that the URBs have been unlinked when
+the call returns. They may be unlinked later but will be unlinked in
+finite time.
+
 usb_wait_anchor_empty_timeout()
 -------------------------------
 
 This function waits for all URBs associated with an anchor to finish
 or a timeout, whichever comes first. Its return value will tell you
 whether the timeout was reached.
+
+
-- 
cgit v1.2.3


From c3e3208e4b0cf4ed69cbcaa5e059e5cf64437c9a Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Sun, 31 Aug 2008 18:04:27 -0700
Subject: usb gadget: fix omap_udc DMA regression

This resolves another regression caused by the "use omap_read/write
instead of __REG" patch:  the hardware address used for DMA to/from
the UDC became wrong.  Bug noted by Russell King.

Reported-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/gadget/omap_udc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 574c53831a05..bb54cca4c543 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -787,7 +787,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
 			omap_set_dma_dest_params(ep->lch,
 				OMAP_DMA_PORT_TIPB,
 				OMAP_DMA_AMODE_CONSTANT,
-				(unsigned long) io_v2p(UDC_DATA_DMA),
+				UDC_DATA_DMA,
 				0, 0);
 		}
 	} else {
@@ -804,7 +804,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
 			omap_set_dma_src_params(ep->lch,
 				OMAP_DMA_PORT_TIPB,
 				OMAP_DMA_AMODE_CONSTANT,
-				(unsigned long) io_v2p(UDC_DATA_DMA),
+				UDC_DATA_DMA,
 				0, 0);
 			/* EMIFF or SDRC */
 			omap_set_dma_dest_burst_mode(ep->lch,
-- 
cgit v1.2.3


From 49cd2480baeb377f91e66ba682f81cac2a1feaa1 Mon Sep 17 00:00:00 2001
From: Filip Joelsson <filip@blueturtle.nu>
Date: Sun, 31 Aug 2008 08:22:16 +0200
Subject: USB: Fixing Nokia 3310c in storage mode

I had trouble connecting my cell phone as a storage device - so I added
it to the unusual_devs.h list. I had trouble with the bcdDeviceMin and
Max values - so after some experimenting I made it pretty inclusive.

From: Filip Joelsson <filip@blueturtle.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/storage/unusual_devs.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 37f45c6c8f7c..b311300cf788 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -160,6 +160,13 @@ UNUSUAL_DEV(  0x0421, 0x0019, 0x0592, 0x0592,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64 ),
 
+/* Reported by Filip Joelsson <filip@blueturtle.nu> */
+UNUSUAL_DEV(  0x0421, 0x005d, 0x0001, 0x0600,
+		"Nokia",
+		"Nokia 3110c",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
 /* Reported by Mario Rettig <mariorettig@web.de> */
 UNUSUAL_DEV(  0x0421, 0x042e, 0x0100, 0x0100,
 		"Nokia",
-- 
cgit v1.2.3


From 0590d5875e3a5dc6586fb16354037f115628896d Mon Sep 17 00:00:00 2001
From: Felipe Balbi <felipe.balbi@nokia.com>
Date: Sat, 30 Aug 2008 19:42:02 +0300
Subject: usb: musb: fix include path

headers were moved, fixing.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/musb_core.c | 4 ++--
 drivers/usb/musb/omap2430.c  | 4 ++--
 drivers/usb/musb/omap2430.h  | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index c5b8f0296fcf..128e949db47c 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -100,8 +100,8 @@
 #include <linux/io.h>
 
 #ifdef	CONFIG_ARM
-#include <asm/arch/hardware.h>
-#include <asm/arch/memory.h>
+#include <mach/hardware.h>
+#include <mach/memory.h>
 #include <asm/mach-types.h>
 #endif
 
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 298b22e6ad0d..9d2dcb121c5e 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -35,8 +35,8 @@
 #include <linux/io.h>
 
 #include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/mux.h>
+#include <mach/hardware.h>
+#include <mach/mux.h>
 
 #include "musb_core.h"
 #include "omap2430.h"
diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h
index 786a62071f72..dc7670718cd2 100644
--- a/drivers/usb/musb/omap2430.h
+++ b/drivers/usb/musb/omap2430.h
@@ -11,8 +11,8 @@
 #define __MUSB_OMAP243X_H__
 
 #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
-#include <asm/arch/hardware.h>
-#include <asm/arch/usb.h>
+#include <mach/hardware.h>
+#include <mach/usb.h>
 
 /*
  * OMAP2430-specific definitions
-- 
cgit v1.2.3


From 01c17142659c02d8cd4c67acdd8358180c5c4fb6 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Tue, 26 Aug 2008 23:35:04 -0700
Subject: USB: fix EHCI periodic transfers

As noted by Stefan Neis <Stefan.Neis@kobil.com>, we had a recent
regression with EHCI periodic transfers, in some (seemingly not
all that common) cases.

The root cause was that the schedule activation was only loosely
coupled to the addition or removal of transfers, so two different
execution contexts could both think they had to deactivate (or
conversely activate) the schedule.  So this fix tightens that
coupling, managing it more like a refcount.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/host/ehci-sched.c | 32 ++++++++++++++------------------
 1 file changed, 14 insertions(+), 18 deletions(-)

diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index b7853c8bac0f..4a0c5a78b2ed 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -437,6 +437,9 @@ static int enable_periodic (struct ehci_hcd *ehci)
 	u32	cmd;
 	int	status;
 
+	if (ehci->periodic_sched++)
+		return 0;
+
 	/* did clearing PSE did take effect yet?
 	 * takes effect only at frame boundaries...
 	 */
@@ -461,6 +464,9 @@ static int disable_periodic (struct ehci_hcd *ehci)
 	u32	cmd;
 	int	status;
 
+	if (--ehci->periodic_sched)
+		return 0;
+
 	/* did setting PSE not take effect yet?
 	 * takes effect only at frame boundaries...
 	 */
@@ -544,13 +550,10 @@ static int qh_link_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
 		: (qh->usecs * 8);
 
 	/* maybe enable periodic schedule processing */
-	if (!ehci->periodic_sched++)
-		return enable_periodic (ehci);
-
-	return 0;
+	return enable_periodic(ehci);
 }
 
-static void qh_unlink_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
+static int qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh)
 {
 	unsigned	i;
 	unsigned	period;
@@ -586,9 +589,7 @@ static void qh_unlink_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	qh_put (qh);
 
 	/* maybe turn off periodic schedule */
-	ehci->periodic_sched--;
-	if (!ehci->periodic_sched)
-		(void) disable_periodic (ehci);
+	return disable_periodic(ehci);
 }
 
 static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh)
@@ -1562,9 +1563,7 @@ itd_link_urb (
 	urb->hcpriv = NULL;
 
 	timer_action (ehci, TIMER_IO_WATCHDOG);
-	if (unlikely (!ehci->periodic_sched++))
-		return enable_periodic (ehci);
-	return 0;
+	return enable_periodic(ehci);
 }
 
 #define	ISO_ERRS (EHCI_ISOC_BUF_ERR | EHCI_ISOC_BABBLE | EHCI_ISOC_XACTERR)
@@ -1642,7 +1641,7 @@ itd_complete (
 	ehci_urb_done(ehci, urb, 0);
 	retval = true;
 	urb = NULL;
-	ehci->periodic_sched--;
+	(void) disable_periodic(ehci);
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
 
 	if (unlikely (list_empty (&stream->td_list))) {
@@ -1951,9 +1950,7 @@ sitd_link_urb (
 	urb->hcpriv = NULL;
 
 	timer_action (ehci, TIMER_IO_WATCHDOG);
-	if (!ehci->periodic_sched++)
-		return enable_periodic (ehci);
-	return 0;
+	return enable_periodic(ehci);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -2019,7 +2016,7 @@ sitd_complete (
 	ehci_urb_done(ehci, urb, 0);
 	retval = true;
 	urb = NULL;
-	ehci->periodic_sched--;
+	(void) disable_periodic(ehci);
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
 
 	if (list_empty (&stream->td_list)) {
@@ -2243,8 +2240,7 @@ restart:
 			if (unlikely (modified)) {
 				if (likely(ehci->periodic_sched > 0))
 					goto restart;
-				/* maybe we can short-circuit this scan! */
-				disable_periodic(ehci);
+				/* short-circuit this scan */
 				now_uframe = clock;
 				break;
 			}
-- 
cgit v1.2.3


From ce816cf9c917435cd2e3b68acc7cfe2c1f4a814f Mon Sep 17 00:00:00 2001
From: Andreas Bombe <aeb@debian.org>
Date: Sun, 14 Sep 2008 01:58:55 +0200
Subject: usb-serial: Add Siemens EF81 to PL-2303 hack triggers

This hardware needs the pl2303 hack in order to work properly :(

Signed-off-by: Andreas Bombe <aeb@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/usb-serial.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index b157c48e8b78..4f7f9e3ae0a4 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -733,7 +733,9 @@ int usb_serial_probe(struct usb_interface *interface,
 	    ((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) &&
 	     (le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) ||
 	    ((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) &&
-	     (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID))) {
+	     (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID)) ||
+	    ((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) &&
+	     (le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) {
 		if (interface != dev->actconfig->interface[0]) {
 			/* check out the endpoints of the other interface*/
 			iface_desc = dev->actconfig->interface[0]->cur_altsetting;
-- 
cgit v1.2.3


From ba0f332c413796925ce322d311d75269689a9e5d Mon Sep 17 00:00:00 2001
From: Craig Shelley <craig@microtron.org.uk>
Date: Thu, 4 Sep 2008 21:28:21 +0100
Subject: USB: SERIAL CP2101 add device IDs

Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/cp2101.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 442cba69cce5..1279553381e3 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -72,6 +72,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
 	{ USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
 	{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
+	{ USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
 	{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
 	{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
 	{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
@@ -83,6 +84,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
 	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
 	{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
+	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
@@ -93,6 +95,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
 	{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
 	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
+	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
 	{ } /* Terminating Entry */
 };
 
-- 
cgit v1.2.3


From fe1926a0f549741ed0ca778aa1c7d3e208895dee Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Thu, 4 Sep 2008 09:56:35 -0400
Subject: USB: unusual_devs addition for RockChip MP3 player

This patch (as1136) adds an unusual_devs entry for a version of the
RockChip MP3 player which can't handle the MODE SENSE command used for
write-protect detection.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/storage/unusual_devs.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index b311300cf788..4d9ca02ac677 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1001,6 +1001,13 @@ UNUSUAL_DEV(  0x069b, 0x3004, 0x0001, 0x0001,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/* Reported by Adrian Pilchowiec <adi1981@epf.pl> */
+UNUSUAL_DEV(  0x071b, 0x3203, 0x0000, 0x0000,
+		"RockChip",
+		"MP3",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
+
 /* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
  * This USB MP3/AVI player device fails and disconnects if more than 128
  * sectors (64kB) are read/written in a single command, and may be present
-- 
cgit v1.2.3


From 6ef65a7fb609a7aca72730dfb9890f30fcd723bf Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Mon, 8 Sep 2008 10:08:59 +0200
Subject: USB: fsl_usb2_udc: fix VDBG() format string

Fixes:
drivers/usb/gadget/fsl_usb2_udc.c: In function 'dr_controller_setup':
drivers/usb/gadget/fsl_usb2_udc.c:229: warning: format '%p' expects type
'void *', but argument 3 has type 'int'

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/gadget/fsl_usb2_udc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index 1cfccf102a2d..45ad556169f1 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -223,7 +223,7 @@ static int dr_controller_setup(struct fsl_udc *udc)
 	fsl_writel(tmp, &dr_regs->endpointlistaddr);
 
 	VDBG("vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x",
-		(int)udc->ep_qh, (int)tmp,
+		udc->ep_qh, (int)tmp,
 		fsl_readl(&dr_regs->endpointlistaddr));
 
 	/* Config PHY interface */
-- 
cgit v1.2.3


From 2bcbe4c199ec012169f938d2c6b543f50c4925ed Mon Sep 17 00:00:00 2001
From: Chris Adams <cmadams@hiwaay.net>
Date: Wed, 10 Sep 2008 14:11:38 -0700
Subject: usb serial: ti_usb_3410_5052 obviously broken by firmware changes

While making some other changes to ti_usb_3410_5052, I noticed that the
changes made to move the firmware loading to a separate function are
broken (in ti_download_firmware(), status is set to -ENOMEM and never
changed).  This means the driver will never initialize the device
properly.  It looks like status was supposed to get the result of
ti_do_download().

Signed-off-by: Chris Adams <cmadams@hiwaay.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/ti_usb_3410_5052.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index e39c779e4160..9a3e495c769c 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -1744,7 +1744,7 @@ static int ti_download_firmware(struct ti_device *tdev, int type)
 	if (buffer) {
 		memcpy(buffer, fw_p->data, fw_p->size);
 		memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
-		ti_do_download(dev, pipe, buffer, fw_p->size);
+		status = ti_do_download(dev, pipe, buffer, fw_p->size);
 		kfree(buffer);
 	}
 	release_firmware(fw_p);
-- 
cgit v1.2.3


From a18f80b4e2fdbc7b88d412c3deb533b9f1f30c30 Mon Sep 17 00:00:00 2001
From: Jaroslav Kysela <perex@perex.cz>
Date: Tue, 16 Sep 2008 15:46:50 +0200
Subject: USB: ftdi_sio: Add 0x5050/0x0900 USB IDs (Papouch Quido USB 4/4)

USB: ftdi_sio: Add 0x5050/0x0900 USB IDs (Papouch Quido USB 4/4)

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/ftdi_sio.c | 1 +
 drivers/usb/serial/ftdi_sio.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 984f6eff4c47..8ff8d0a1bae3 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -654,6 +654,7 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 382265bba969..ad41287ac2c7 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -750,6 +750,7 @@
 
 #define PAPOUCH_VID			0x5050	/* Vendor ID */
 #define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer */
+#define PAPOUCH_QUIDO4x4_PID		0x0900	/* Quido 4/4 Module */
 
 /*
  * ACG Identification Technologies GmbH products (http://www.acg.de/).
-- 
cgit v1.2.3


From 884579d03a3e1e9ac8b7f32a1c36387cac3eb80b Mon Sep 17 00:00:00 2001
From: Otavio Salvador <otavio@ossystems.com.br>
Date: Wed, 17 Sep 2008 14:40:46 -0300
Subject: USB: serial: add ZTE CDMA Tech id to option driver

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/option.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 9f9cd36455f4..73f8277f88f2 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -218,6 +218,7 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 /* ZTE PRODUCTS */
 #define ZTE_VENDOR_ID				0x19d2
 #define ZTE_PRODUCT_MF628			0x0015
+#define ZTE_PRODUCT_CDMA_TECH			0xfffe
 
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
@@ -347,6 +348,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
-- 
cgit v1.2.3


From b77a5c7040643e658622148bb7d7dad63e8d0158 Mon Sep 17 00:00:00 2001
From: Kevin Lloyd <klloyd@sierrawireless.com>
Date: Wed, 17 Sep 2008 09:03:38 -0700
Subject: USB Serial: Sierra: Add MC8785 VID/PID

Add another MC8785 VID/PID

Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/sierra.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index eb87640f362a..ea1a103c99be 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -186,6 +186,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x6821) },	/* Sierra Wireless AirCard 875U */
 	{ USB_DEVICE(0x1199, 0x6832) },	/* Sierra Wireless MC8780 */
 	{ USB_DEVICE(0x1199, 0x6833) },	/* Sierra Wireless MC8781 */
+	{ USB_DEVICE(0x1199, 0x683A) },	/* Sierra Wireless MC8785 */
 	{ USB_DEVICE(0x1199, 0x683B) },	/* Sierra Wireless MC8785 Composite */
 	{ USB_DEVICE(0x1199, 0x683C) },	/* Sierra Wireless MC8790 */
 	{ USB_DEVICE(0x1199, 0x683D) },	/* Sierra Wireless MC8790 */
-- 
cgit v1.2.3


From 09fa14aa9273ca5cf5459b2057eb79e83e81e6be Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Mon, 22 Sep 2008 15:00:08 -0700
Subject: USB: drivers/usb/musb/: disable it on SuperH

In file included from drivers/usb/musb/musb_core.h:59,
                 from drivers/usb/musb/musb_core.c:108:
drivers/usb/musb/musb_io.h:42: error: conflicting types for '__raw_readsl'
/usr/src/devel/arch/sh/include/asm/io.h:112: error: previous declaration of '__raw_readsl' was here
drivers/usb/musb/musb_io.h:42: error: conflicting types for '__raw_readsl'
/usr/src/devel/arch/sh/include/asm/io.h:112: error: previous declaration of '__raw_readsl' was here
drivers/usb/musb/musb_io.h:44: error: conflicting types for 'readsw'
/usr/src/devel/arch/sh/include/asm/io.h:164: error: previous definition of 'readsw' was here
drivers/usb/musb/musb_io.h:46: error: conflicting types for 'readsb'
/usr/src/devel/arch/sh/include/asm/io.h:163: error: previous definition of 'readsb' was here
drivers/usb/musb/musb_io.h:49: error: conflicting types for '__raw_writesl'
/usr/src/devel/arch/sh/include/asm/io.h:111: error: previous declaration of '__raw_writesl' was here
drivers/usb/musb/musb_io.h:49: error: conflicting types for '__raw_writesl'
/usr/src/devel/arch/sh/include/asm/io.h:111: error: previous declaration of '__raw_writesl' was here
drivers/usb/musb/musb_io.h:51: error: conflicting types for 'writesw'
/usr/src/devel/arch/sh/include/asm/io.h:164: error: previous definition of 'writesw' was here
drivers/usb/musb/musb_io.h:53: error: conflicting types for 'writesb'
/usr/src/devel/arch/sh/include/asm/io.h:163: error: previous definition of 'writesb' was here

Cc: Karsten Keil <kkeil@suse.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index a0017486ad4e..58b2b8fc9439 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -9,6 +9,7 @@ comment "Enable Host or Gadget support to see Inventra options"
 # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
 config USB_MUSB_HDRC
 	depends on (USB || USB_GADGET) && HAVE_CLK
+	depends on !SUPERH
 	select TWL4030_USB if MACH_OMAP_3430SDP
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ...)'
 	help
-- 
cgit v1.2.3


From 96285cb885b445b03b22849f2536af23c7454a11 Mon Sep 17 00:00:00 2001
From: Gaetan Carlier <gcpatch@gmail.com>
Date: Mon, 22 Sep 2008 15:00:09 -0700
Subject: usb: ftdi_sio: add support for Domintell devices

Support for Domintell devices (FTDI FT232BM based) : DGQG and DUSB01
module.  PIDs were missing.

Signed-off-by: Gaetan Carlier <gcpatch@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/ftdi_sio.c | 2 ++
 drivers/usb/serial/ftdi_sio.h | 4 ++++
 2 files changed, 6 insertions(+)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8ff8d0a1bae3..3dc93b542b30 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -655,6 +655,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index ad41287ac2c7..8a5b6df3a976 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -839,6 +839,10 @@
 /* Rig Expert Ukraine devices */
 #define FTDI_REU_TINY_PID		0xED22	/* RigExpert Tiny */
 
+/* Domintell products  http://www.domintell.com */
+#define FTDI_DOMINTELL_DGQG_PID	0xEF50	/* Master */
+#define FTDI_DOMINTELL_DUSB_PID	0xEF51	/* DUSB01 module */
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */
-- 
cgit v1.2.3


From af747c460b663a4b7795dc3f6897b5506fde6888 Mon Sep 17 00:00:00 2001
From: David Almaroad <dalmaroad@gmail.com>
Date: Mon, 22 Sep 2008 15:00:11 -0700
Subject: usb: unusual devs patch for Nokia 5310 Music Xpress

The Nokia 5310 Music Xpress phone reports one too many sectors in
usb-storage mode.  This patch resolves that.

Signed-off-by: David Almaroad <dalmaroad@gmail.com>
Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/storage/unusual_devs.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 4d9ca02ac677..cd155475cb6e 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -246,6 +246,13 @@ UNUSUAL_DEV(  0x0421, 0x04fa, 0x0601, 0x0601,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/* Patch for Nokia 5310 capacity */
+UNUSUAL_DEV(  0x0421, 0x006a, 0x0000, 0x0591,
+	"Nokia",
+	"5310",
+	US_SC_DEVICE, US_PR_DEVICE, NULL,
+	US_FL_FIX_CAPACITY ),
+
 /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
 UNUSUAL_DEV(  0x0424, 0x0fdc, 0x0210, 0x0210,
 		"SMSC",
-- 
cgit v1.2.3


From 5257d97a219e17abf8188f136e1189da3b3af33c Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Mon, 22 Sep 2008 14:43:08 -0400
Subject: USB: revert recovery from transient errors

This patch (as1135) essentially reverts the major parts of two earlier
patches to usbcore, because they ended up causing a regression.

Trying to recover from transient communication errors can lead to
other problems, because operations that failed during the error period
are not always retried.  The simplest example is the initial
Set-Config request sent after device enumeration; if it gets lost then
it will not be retried and the device will remain unconfigured.

This patch restores the old behavior in which any port disconnect or
port disable causes the entire device structure to be removed, fixing a
reported regression.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/core/hub.c | 39 +++++++++++++++++----------------------
 1 file changed, 17 insertions(+), 22 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 6a5cb018383d..d99963873e37 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2683,35 +2683,17 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 				USB_PORT_STAT_C_ENABLE);
 #endif
 
-	/* Try to use the debounce delay for protection against
-	 * port-enable changes caused, for example, by EMI.
-	 */
-	if (portchange & (USB_PORT_STAT_C_CONNECTION |
-				USB_PORT_STAT_C_ENABLE)) {
-		status = hub_port_debounce(hub, port1);
-		if (status < 0) {
-			if (printk_ratelimit())
-				dev_err (hub_dev, "connect-debounce failed, "
-						"port %d disabled\n", port1);
-			portstatus &= ~USB_PORT_STAT_CONNECTION;
-		} else {
-			portstatus = status;
-		}
-	}
-
 	/* Try to resuscitate an existing device */
 	udev = hdev->children[port1-1];
 	if ((portstatus & USB_PORT_STAT_CONNECTION) && udev &&
 			udev->state != USB_STATE_NOTATTACHED) {
-
 		usb_lock_device(udev);
 		if (portstatus & USB_PORT_STAT_ENABLE) {
 			status = 0;		/* Nothing to do */
-		} else if (!udev->persist_enabled) {
-			status = -ENODEV;	/* Mustn't resuscitate */
 
 #ifdef CONFIG_USB_SUSPEND
-		} else if (udev->state == USB_STATE_SUSPENDED) {
+		} else if (udev->state == USB_STATE_SUSPENDED &&
+				udev->persist_enabled) {
 			/* For a suspended device, treat this as a
 			 * remote wakeup event.
 			 */
@@ -2726,7 +2708,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 #endif
 
 		} else {
-			status = usb_reset_device(udev);
+			status = -ENODEV;	/* Don't resuscitate */
 		}
 		usb_unlock_device(udev);
 
@@ -2741,6 +2723,19 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 		usb_disconnect(&hdev->children[port1-1]);
 	clear_bit(port1, hub->change_bits);
 
+	if (portchange & (USB_PORT_STAT_C_CONNECTION |
+				USB_PORT_STAT_C_ENABLE)) {
+		status = hub_port_debounce(hub, port1);
+		if (status < 0) {
+			if (printk_ratelimit())
+				dev_err(hub_dev, "connect-debounce failed, "
+						"port %d disabled\n", port1);
+			portstatus &= ~USB_PORT_STAT_CONNECTION;
+		} else {
+			portstatus = status;
+		}
+	}
+
 	/* Return now if debouncing failed or nothing is connected */
 	if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
 
@@ -2748,7 +2743,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 		if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
 				&& !(portstatus & (1 << USB_PORT_FEAT_POWER)))
 			set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
- 
+
 		if (portstatus & USB_PORT_STAT_ENABLE)
   			goto done;
 		return;
-- 
cgit v1.2.3


From 44ce17192a01218b242e032237e1d2e52ef50429 Mon Sep 17 00:00:00 2001
From: Bruno Randolf <br1@einfach.org>
Date: Tue, 23 Sep 2008 19:48:36 +0200
Subject: [MIPS] au1000: Fix gpio direction

When setting the direction of one GPIO pin we have to keep the state of the
other pins, hence use binary OR. Also gpio_direction_output() wants to set an
initial value, so add that too.

This fixes a problem with the USB power switch on mtx-1 boards.

Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/au1000/common/gpio.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c
index b485d94ce8a5..1f058434b726 100644
--- a/arch/mips/au1000/common/gpio.c
+++ b/arch/mips/au1000/common/gpio.c
@@ -61,7 +61,8 @@ static int au1xxx_gpio2_direction_input(unsigned gpio)
 static int au1xxx_gpio2_direction_output(unsigned gpio, int value)
 {
 	gpio -= AU1XXX_GPIO_BASE;
-	gpio2->dir = (0x01 << gpio) | (value << gpio);
+	gpio2->dir |= 0x01 << gpio;
+	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio);
 	return 0;
 }
 
@@ -90,6 +91,7 @@ static int au1xxx_gpio1_direction_input(unsigned gpio)
 static int au1xxx_gpio1_direction_output(unsigned gpio, int value)
 {
 	gpio1->trioutclr = (0x01 & gpio);
+	au1xxx_gpio1_write(gpio, value);
 	return 0;
 }
 
-- 
cgit v1.2.3


From 5291925a9a65ea334f6e887d0f01dd119b8e2b2e Mon Sep 17 00:00:00 2001
From: Jack Tan <jack.tan@windriver.com>
Date: Tue, 23 Sep 2008 22:52:34 +0800
Subject: [MIPS] Fixe the definition of PTRS_PER_PGD
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

When we use > 4KB's page size the original definition is not consistent
with PGDIR_SIZE. For exeample, if we use 16KB page size the PGDIR_SHIFT is
(14-2) + 14 = 26, PGDIR_SIZE is 2^26，so the PTRS_PER_PGD should be:

	2^32/2^26 = 2^6

but the original definition of PTRS_PER_PGD is 4096 (PGDIR_ORDER = 0).

So, this definition needs to be consistent with the PGDIR_SIZE.

And the new definition is consistent with the PGD init in pagetable_init().

Signed-off-by: Dajie Tan <jiankemeng@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 include/asm-mips/pgtable-32.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/asm-mips/pgtable-32.h b/include/asm-mips/pgtable-32.h
index 4396e9ffd418..55813d6150c7 100644
--- a/include/asm-mips/pgtable-32.h
+++ b/include/asm-mips/pgtable-32.h
@@ -57,7 +57,7 @@ extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
 #define PMD_ORDER	1
 #define PTE_ORDER	0
 
-#define PTRS_PER_PGD	((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t))
+#define PTRS_PER_PGD	(USER_PTRS_PER_PGD * 2)
 #define PTRS_PER_PTE	((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t))
 
 #define USER_PTRS_PER_PGD	(0x80000000UL/PGDIR_SIZE)
-- 
cgit v1.2.3


From 1eda81495a49a4ee91d8863b0a441a624375efea Mon Sep 17 00:00:00 2001
From: Marc Dionne <marc.c.dionne@gmail.com>
Date: Tue, 23 Sep 2008 22:40:02 -0400
Subject: x86: prevent stale state of c1e_mask across CPU offline/online, fix

Fix build error introduced by commit 4faac97d44ac27 ("x86: prevent stale
state of c1e_mask across CPU offline/online").

process_32.c needs to include idle.h to get the prototype for
c1e_remove_cpu()

Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/process_32.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 4b3cfdf54216..31f40b24bf5d 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -55,6 +55,7 @@
 #include <asm/tlbflush.h>
 #include <asm/cpu.h>
 #include <asm/kdebug.h>
+#include <asm/idle.h>
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
-- 
cgit v1.2.3


From 77a9a768b7374cd23d1f400097eede9f1547f508 Mon Sep 17 00:00:00 2001
From: Jeremy Katz <katzj@redhat.com>
Date: Tue, 23 Sep 2008 21:54:00 -0400
Subject: x86: disable apm on the olpc

The OLPC doesn't support APM but also doesn't have DMI, so we can't detect
and disable it based on DMI data.  So, just disable based on machine_is_olpc()

Signed-off-by: Jeremy Katz <katzj@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apm_32.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 9ee24e6bc4b0..732d1f4e10ee 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -234,6 +234,7 @@
 #include <asm/uaccess.h>
 #include <asm/desc.h>
 #include <asm/i8253.h>
+#include <asm/olpc.h>
 #include <asm/paravirt.h>
 #include <asm/reboot.h>
 
@@ -2217,7 +2218,7 @@ static int __init apm_init(void)
 
 	dmi_check_system(apm_dmi_table);
 
-	if (apm_info.bios.version == 0 || paravirt_enabled()) {
+	if (apm_info.bios.version == 0 || paravirt_enabled() || machine_is_olpc()) {
 		printk(KERN_INFO "apm: BIOS not found.\n");
 		return -ENODEV;
 	}
-- 
cgit v1.2.3


From 4ebb52d34fac2904e541ccfa8e32126db836fa92 Mon Sep 17 00:00:00 2001
From: Uwe Kleine-Koenig <ukleinek@informatik.uni-freiburg.de>
Date: Wed, 24 Sep 2008 13:39:21 +0200
Subject: i2c-powermac: Fix section for probe and remove functions

__devexit for i2c_powermac_probe is obviously wrong.  In the definition
of struct platform_driver i2c_powermac_driver the remove function
i2c_powermac_remove is wrapped in __devexit_p, so it should be defined
using __devexit.

Signed-off-by: Uwe Kleine-Koenig <ukleinek@informatik.uni-freiburg.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/i2c/busses/i2c-powermac.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 22f6d5c00d80..0e7b1c6724aa 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -180,7 +180,7 @@ static const struct i2c_algorithm i2c_powermac_algorithm = {
 };
 
 
-static int i2c_powermac_remove(struct platform_device *dev)
+static int __devexit i2c_powermac_remove(struct platform_device *dev)
 {
 	struct i2c_adapter	*adapter = platform_get_drvdata(dev);
 	struct pmac_i2c_bus	*bus = i2c_get_adapdata(adapter);
@@ -200,7 +200,7 @@ static int i2c_powermac_remove(struct platform_device *dev)
 }
 
 
-static int __devexit i2c_powermac_probe(struct platform_device *dev)
+static int __devinit i2c_powermac_probe(struct platform_device *dev)
 {
 	struct pmac_i2c_bus *bus = dev->dev.platform_data;
 	struct device_node *parent = NULL;
-- 
cgit v1.2.3


From e74783ec3cb981211689bd2cfd3248f8dc48ec01 Mon Sep 17 00:00:00 2001
From: Sven Wegener <sven.wegener@stealer.net>
Date: Wed, 24 Sep 2008 13:39:21 +0200
Subject: i2c-dev: Return correct error code on class_create() failure

We need to convert the error pointer from class_create(), else we'll return the
successful return code from register_chrdev() on failure.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/i2c/i2c-dev.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index af4491fa7e34..307d976c9b69 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -583,8 +583,10 @@ static int __init i2c_dev_init(void)
 		goto out;
 
 	i2c_dev_class = class_create(THIS_MODULE, "i2c-dev");
-	if (IS_ERR(i2c_dev_class))
+	if (IS_ERR(i2c_dev_class)) {
+		res = PTR_ERR(i2c_dev_class);
 		goto out_unreg_chrdev;
+	}
 
 	res = i2c_add_driver(&i2cdev_driver);
 	if (res)
-- 
cgit v1.2.3


From 17a172fe112a15dc9cd694d84983c51e1dc6bf34 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 24 Sep 2008 13:39:22 +0200
Subject: i2c: Fix mailing lists in two MAINTAINERS entries

Two MAINTAINER entries (I2C/SMBUS STUB DRIVER and SIS 96X I2C/SMBUS
DRIVER) were improperly pointing to the lm-sensors mailing list
instead of the i2c mailing list. Fix them.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
---
 MAINTAINERS | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 42ebbfdc350b..3596d1782264 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1984,7 +1984,7 @@ S:	Maintained
 I2C/SMBUS STUB DRIVER
 P:	Mark M. Hoffman
 M:	mhoffman@lightlink.com
-L:	lm-sensors@lm-sensors.org
+L:	i2c@lm-sensors.org
 S:	Maintained
 
 I2C SUBSYSTEM
@@ -3726,7 +3726,7 @@ S:	Maintained
 SIS 96X I2C/SMBUS DRIVER
 P:	Mark M. Hoffman
 M:	mhoffman@lightlink.com
-L:	lm-sensors@lm-sensors.org
+L:	i2c@lm-sensors.org
 S:	Maintained
 
 SIS FRAMEBUFFER DRIVER
-- 
cgit v1.2.3


From 92cccc2cda9a744326bbd9f16c635187af7f8a09 Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Tue, 23 Sep 2008 14:28:16 -0700
Subject: ath9k: disable MIB interrupts to fix interrupt storm

Enabling the MIB interrupts has proven to cause an
interrupt storm after 7 hours of run. We will make use of the
MIB interrupt once we have ANI supported added so for now
to cure this we disable the interrupt.

The interrupt storm can be seen as follows after 7 hours of run
as reported by  Steven Noonan <steven@uplinklabs.net>:

18:28:38          sum   1106.00
18:28:39          sum   1037.62
18:28:40          sum   1069.00
18:28:41          sum   1167.00
18:28:42          sum   1155.00
18:28:43          sum   1339.00
18:28:44          sum  18355.00
18:28:45          sum  17845.45
18:28:46          sum  15285.00
18:28:47          sum  17511.00
18:28:48          sum  17568.69
18:28:49          sum  17704.04
18:28:50          sum  18566.67
18:28:51          sum  18913.13

at 18:28:44 the MIB interrupt kicked off and caused huge
latency which can be seen even on a video he submitted:

http://www.youtube.com/watch?v=4GeCx1gZMpA

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/core.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/ath9k/core.c b/drivers/net/wireless/ath9k/core.c
index c04959357bda..87e37bc39145 100644
--- a/drivers/net/wireless/ath9k/core.c
+++ b/drivers/net/wireless/ath9k/core.c
@@ -795,6 +795,12 @@ int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan)
 	if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)
 		sc->sc_imask |= ATH9K_INT_CST;
 
+	/* Note: We disable MIB interrupts for now as we don't yet
+	 * handle processing ANI, otherwise you will get an interrupt
+	 * storm after about 7 hours of usage making the system unusable
+	 * with huge latency. Once we do have ANI processing included
+	 * we can re-enable this interrupt. */
+#if 0
 	/*
 	 * Enable MIB interrupts when there are hardware phy counters.
 	 * Note we only do this (at the moment) for station mode.
@@ -802,6 +808,7 @@ int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan)
 	if (ath9k_hw_phycounters(ah) &&
 	    ((sc->sc_opmode == ATH9K_M_STA) || (sc->sc_opmode == ATH9K_M_IBSS)))
 		sc->sc_imask |= ATH9K_INT_MIB;
+#endif
 	/*
 	 * Some hardware processes the TIM IE and fires an
 	 * interrupt when the TIM bit is set.  For hardware
-- 
cgit v1.2.3


From 72029fe85d8d060b3f966f2dbc36b3c75b5a6532 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Sep 2008 16:22:23 -0500
Subject: 9p: implement proper trans module refcounting and unregistration

9p trans modules aren't refcounted nor were they unregistered
properly.  Fix it.

* Add 9p_trans_module->owner and reference the module on each trans
  instance creation and put it on destruction.

* Protect v9fs_trans_list with a spinlock.  This isn't strictly
  necessary as the list is manipulated only during module loading /
  unloading but it's a good idea to make the API safe.

* Unregister trans modules when the corresponding module is being
  unloaded.

* While at it, kill unnecessary EXPORT_SYMBOL on p9_trans_fd_init().

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
---
 include/net/9p/9p.h        |  1 +
 include/net/9p/transport.h |  9 ++++-
 net/9p/client.c            | 10 ++++-
 net/9p/mod.c               | 92 +++++++++++++++++++++++++++++++++-------------
 net/9p/trans_fd.c          | 11 +++++-
 net/9p/trans_virtio.c      |  2 +
 6 files changed, 95 insertions(+), 30 deletions(-)

diff --git a/include/net/9p/9p.h b/include/net/9p/9p.h
index b3d3e27c6299..c3626c0ba9d3 100644
--- a/include/net/9p/9p.h
+++ b/include/net/9p/9p.h
@@ -596,4 +596,5 @@ int p9_idpool_check(int id, struct p9_idpool *p);
 int p9_error_init(void);
 int p9_errstr2errno(char *, int);
 int p9_trans_fd_init(void);
+void p9_trans_fd_exit(void);
 #endif /* NET_9P_H */
diff --git a/include/net/9p/transport.h b/include/net/9p/transport.h
index 0db3a4038dc0..3ca737120a90 100644
--- a/include/net/9p/transport.h
+++ b/include/net/9p/transport.h
@@ -26,6 +26,8 @@
 #ifndef NET_9P_TRANSPORT_H
 #define NET_9P_TRANSPORT_H
 
+#include <linux/module.h>
+
 /**
  * enum p9_trans_status - different states of underlying transports
  * @Connected: transport is connected and healthy
@@ -91,9 +93,12 @@ struct p9_trans_module {
 	int maxsize;		/* max message size of transport */
 	int def;		/* this transport should be default */
 	struct p9_trans * (*create)(const char *, char *, int, unsigned char);
+	struct module *owner;
 };
 
 void v9fs_register_trans(struct p9_trans_module *m);
-struct p9_trans_module *v9fs_match_trans(const substring_t *name);
-struct p9_trans_module *v9fs_default_trans(void);
+void v9fs_unregister_trans(struct p9_trans_module *m);
+struct p9_trans_module *v9fs_get_trans_by_name(const substring_t *name);
+struct p9_trans_module *v9fs_get_default_trans(void);
+void v9fs_put_trans(struct p9_trans_module *m);
 #endif /* NET_9P_TRANSPORT_H */
diff --git a/net/9p/client.c b/net/9p/client.c
index 2ffe40cf2f01..10e320307ec0 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -75,7 +75,6 @@ static int parse_opts(char *opts, struct p9_client *clnt)
 	int option;
 	int ret = 0;
 
-	clnt->trans_mod = v9fs_default_trans();
 	clnt->dotu = 1;
 	clnt->msize = 8192;
 
@@ -108,7 +107,7 @@ static int parse_opts(char *opts, struct p9_client *clnt)
 			clnt->msize = option;
 			break;
 		case Opt_trans:
-			clnt->trans_mod = v9fs_match_trans(&args[0]);
+			clnt->trans_mod = v9fs_get_trans_by_name(&args[0]);
 			break;
 		case Opt_legacy:
 			clnt->dotu = 0;
@@ -117,6 +116,10 @@ static int parse_opts(char *opts, struct p9_client *clnt)
 			continue;
 		}
 	}
+
+	if (!clnt->trans_mod)
+		clnt->trans_mod = v9fs_get_default_trans();
+
 	kfree(options);
 	return ret;
 }
@@ -150,6 +153,7 @@ struct p9_client *p9_client_create(const char *dev_name, char *options)
 	if (!clnt)
 		return ERR_PTR(-ENOMEM);
 
+	clnt->trans_mod = NULL;
 	clnt->trans = NULL;
 	spin_lock_init(&clnt->lock);
 	INIT_LIST_HEAD(&clnt->fidlist);
@@ -235,6 +239,8 @@ void p9_client_destroy(struct p9_client *clnt)
 		clnt->trans = NULL;
 	}
 
+	v9fs_put_trans(clnt->trans_mod);
+
 	list_for_each_entry_safe(fid, fidptr, &clnt->fidlist, flist)
 		p9_fid_destroy(fid);
 
diff --git a/net/9p/mod.c b/net/9p/mod.c
index bdee1fb7cc62..1084feb24cb0 100644
--- a/net/9p/mod.c
+++ b/net/9p/mod.c
@@ -31,6 +31,7 @@
 #include <linux/parser.h>
 #include <net/9p/transport.h>
 #include <linux/list.h>
+#include <linux/spinlock.h>
 
 #ifdef CONFIG_NET_9P_DEBUG
 unsigned int p9_debug_level = 0;	/* feature-rific global debug level  */
@@ -44,8 +45,8 @@ MODULE_PARM_DESC(debug, "9P debugging level");
  *
  */
 
+static DEFINE_SPINLOCK(v9fs_trans_lock);
 static LIST_HEAD(v9fs_trans_list);
-static struct p9_trans_module *v9fs_default_transport;
 
 /**
  * v9fs_register_trans - register a new transport with 9p
@@ -54,48 +55,87 @@ static struct p9_trans_module *v9fs_default_transport;
  */
 void v9fs_register_trans(struct p9_trans_module *m)
 {
+	spin_lock(&v9fs_trans_lock);
 	list_add_tail(&m->list, &v9fs_trans_list);
-	if (m->def)
-		v9fs_default_transport = m;
+	spin_unlock(&v9fs_trans_lock);
 }
 EXPORT_SYMBOL(v9fs_register_trans);
 
 /**
- * v9fs_match_trans - match transport versus registered transports
+ * v9fs_unregister_trans - unregister a 9p transport
+ * @m: the transport to remove
+ *
+ */
+void v9fs_unregister_trans(struct p9_trans_module *m)
+{
+	spin_lock(&v9fs_trans_lock);
+	list_del_init(&m->list);
+	spin_unlock(&v9fs_trans_lock);
+}
+EXPORT_SYMBOL(v9fs_unregister_trans);
+
+/**
+ * v9fs_get_trans_by_name - get transport with the matching name
  * @name: string identifying transport
  *
  */
-struct p9_trans_module *v9fs_match_trans(const substring_t *name)
+struct p9_trans_module *v9fs_get_trans_by_name(const substring_t *name)
 {
-	struct list_head *p;
-	struct p9_trans_module *t = NULL;
-
-	list_for_each(p, &v9fs_trans_list) {
-		t = list_entry(p, struct p9_trans_module, list);
-		if (strncmp(t->name, name->from, name->to-name->from) == 0)
-			return t;
-	}
-	return NULL;
+	struct p9_trans_module *t, *found = NULL;
+
+	spin_lock(&v9fs_trans_lock);
+
+	list_for_each_entry(t, &v9fs_trans_list, list)
+		if (strncmp(t->name, name->from, name->to-name->from) == 0 &&
+		    try_module_get(t->owner)) {
+			found = t;
+			break;
+		}
+
+	spin_unlock(&v9fs_trans_lock);
+	return found;
 }
-EXPORT_SYMBOL(v9fs_match_trans);
+EXPORT_SYMBOL(v9fs_get_trans_by_name);
 
 /**
- * v9fs_default_trans - returns pointer to default transport
+ * v9fs_get_default_trans - get the default transport
  *
  */
 
-struct p9_trans_module *v9fs_default_trans(void)
+struct p9_trans_module *v9fs_get_default_trans(void)
 {
-	if (v9fs_default_transport)
-		return v9fs_default_transport;
-	else if (!list_empty(&v9fs_trans_list))
-		return list_first_entry(&v9fs_trans_list,
-					struct p9_trans_module, list);
-	else
-		return NULL;
+	struct p9_trans_module *t, *found = NULL;
+
+	spin_lock(&v9fs_trans_lock);
+
+	list_for_each_entry(t, &v9fs_trans_list, list)
+		if (t->def && try_module_get(t->owner)) {
+			found = t;
+			break;
+		}
+
+	if (!found)
+		list_for_each_entry(t, &v9fs_trans_list, list)
+			if (try_module_get(t->owner)) {
+				found = t;
+				break;
+			}
+
+	spin_unlock(&v9fs_trans_lock);
+	return found;
 }
-EXPORT_SYMBOL(v9fs_default_trans);
+EXPORT_SYMBOL(v9fs_get_default_trans);
 
+/**
+ * v9fs_put_trans - put trans
+ * @m: transport to put
+ *
+ */
+void v9fs_put_trans(struct p9_trans_module *m)
+{
+	if (m)
+		module_put(m->owner);
+}
 
 /**
  * v9fs_init - Initialize module
@@ -120,6 +160,8 @@ static int __init init_p9(void)
 static void __exit exit_p9(void)
 {
 	printk(KERN_INFO "Unloading 9P2000 support\n");
+
+	p9_trans_fd_exit();
 }
 
 module_init(init_p9)
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index cdf137af7adc..6a32ffdb9429 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -1629,6 +1629,7 @@ static struct p9_trans_module p9_tcp_trans = {
 	.maxsize = MAX_SOCK_BUF,
 	.def = 1,
 	.create = p9_trans_create_tcp,
+	.owner = THIS_MODULE,
 };
 
 static struct p9_trans_module p9_unix_trans = {
@@ -1636,6 +1637,7 @@ static struct p9_trans_module p9_unix_trans = {
 	.maxsize = MAX_SOCK_BUF,
 	.def = 0,
 	.create = p9_trans_create_unix,
+	.owner = THIS_MODULE,
 };
 
 static struct p9_trans_module p9_fd_trans = {
@@ -1643,6 +1645,7 @@ static struct p9_trans_module p9_fd_trans = {
 	.maxsize = MAX_SOCK_BUF,
 	.def = 0,
 	.create = p9_trans_create_fd,
+	.owner = THIS_MODULE,
 };
 
 int p9_trans_fd_init(void)
@@ -1659,4 +1662,10 @@ int p9_trans_fd_init(void)
 
 	return 0;
 }
-EXPORT_SYMBOL(p9_trans_fd_init);
+
+void p9_trans_fd_exit(void)
+{
+	v9fs_unregister_trans(&p9_tcp_trans);
+	v9fs_unregister_trans(&p9_unix_trans);
+	v9fs_unregister_trans(&p9_fd_trans);
+}
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index 42adc052b149..94912e077a55 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -528,6 +528,7 @@ static struct p9_trans_module p9_virtio_trans = {
 	.create = p9_virtio_create,
 	.maxsize = PAGE_SIZE*16,
 	.def = 0,
+	.owner = THIS_MODULE,
 };
 
 /* The standard init function */
@@ -545,6 +546,7 @@ static int __init p9_virtio_init(void)
 static void __exit p9_virtio_cleanup(void)
 {
 	unregister_virtio_driver(&p9_virtio_drv);
+	v9fs_unregister_trans(&p9_virtio_trans);
 }
 
 module_init(p9_virtio_init);
-- 
cgit v1.2.3


From 7dc5d24be06a5ed874af035d52a083a7b61ef1bd Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Sep 2008 16:22:23 -0500
Subject: 9p-trans_fd: fix trans_fd::p9_conn_destroy()

p9_conn_destroy() first kills all current requests by calling
p9_conn_cancel(), then waits for the request list to be cleared by
waiting on p9_conn->equeue.  After that, polling is stopped and the
trans is destroyed.  This sequence has a few problems.

* Read and write works were never cancelled and the p9_conn can be
  destroyed while the works are running as r/w works remove requests
  from the list and dereference the p9_conn from them.

* The list emptiness wait using p9_conn->equeue wouldn't trigger
  because p9_conn_cancel() always clears all the lists and the only
  way the wait can be triggered is to have another task to issue a
  request between the slim window between p9_conn_cancel() and the
  wait, which isn't safe under the current implementation with or
  without the wait.

This patch fixes the problem by first stopping poll, which can
schedule r/w works, first and cancle r/w works which guarantees that
r/w works are not and will not run from that point and then calling
p9_conn_cancel() and do the rest of destruction.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
---
 net/9p/trans_fd.c | 24 +++++-------------------
 1 file changed, 5 insertions(+), 19 deletions(-)

diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index 6a32ffdb9429..ee0d151da31a 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -151,7 +151,6 @@ struct p9_mux_poll_task {
  * @trans: reference to transport instance for this connection
  * @tagpool: id accounting for transactions
  * @err: error state
- * @equeue: event wait_q (?)
  * @req_list: accounting for requests which have been sent
  * @unsent_req_list: accounting for requests that haven't been sent
  * @rcall: current response &p9_fcall structure
@@ -178,7 +177,6 @@ struct p9_conn {
 	struct p9_trans *trans;
 	struct p9_idpool *tagpool;
 	int err;
-	wait_queue_head_t equeue;
 	struct list_head req_list;
 	struct list_head unsent_req_list;
 	struct p9_fcall *rcall;
@@ -430,7 +428,6 @@ static struct p9_conn *p9_conn_create(struct p9_trans *trans)
 	}
 
 	m->err = 0;
-	init_waitqueue_head(&m->equeue);
 	INIT_LIST_HEAD(&m->req_list);
 	INIT_LIST_HEAD(&m->unsent_req_list);
 	m->rcall = NULL;
@@ -483,18 +480,13 @@ static void p9_conn_destroy(struct p9_conn *m)
 {
 	P9_DPRINTK(P9_DEBUG_MUX, "mux %p prev %p next %p\n", m,
 		m->mux_list.prev, m->mux_list.next);
-	p9_conn_cancel(m, -ECONNRESET);
-
-	if (!list_empty(&m->req_list)) {
-		/* wait until all processes waiting on this session exit */
-		P9_DPRINTK(P9_DEBUG_MUX,
-			"mux %p waiting for empty request queue\n", m);
-		wait_event_timeout(m->equeue, (list_empty(&m->req_list)), 5000);
-		P9_DPRINTK(P9_DEBUG_MUX, "mux %p request queue empty: %d\n", m,
-			list_empty(&m->req_list));
-	}
 
 	p9_mux_poll_stop(m);
+	cancel_work_sync(&m->rq);
+	cancel_work_sync(&m->wq);
+
+	p9_conn_cancel(m, -ECONNRESET);
+
 	m->trans = NULL;
 	p9_idpool_destroy(m->tagpool);
 	kfree(m);
@@ -840,8 +832,6 @@ static void p9_read_work(struct work_struct *work)
 					(*req->cb) (req, req->cba);
 				else
 					kfree(req->rcall);
-
-				wake_up(&m->equeue);
 			}
 		} else {
 			if (err >= 0 && rcall->id != P9_RFLUSH)
@@ -984,8 +974,6 @@ static void p9_mux_flush_cb(struct p9_req *freq, void *a)
 			(*req->cb) (req, req->cba);
 		else
 			kfree(req->rcall);
-
-		wake_up(&m->equeue);
 	}
 
 	kfree(freq->tcall);
@@ -1191,8 +1179,6 @@ void p9_conn_cancel(struct p9_conn *m, int err)
 		else
 			kfree(req->rcall);
 	}
-
-	wake_up(&m->equeue);
 }
 
 /**
-- 
cgit v1.2.3


From 571ffeafffbfdd0b8f2f9d3b991028797ec87e42 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Sep 2008 16:22:23 -0500
Subject: 9p-trans_fd: clean up p9_conn_create()

* Use kzalloc() to allocate p9_conn and remove 0/NULL initializations.

* Clean up error return paths.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
---
 net/9p/trans_fd.c | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)

diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index ee0d151da31a..6c88e8983750 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -407,11 +407,11 @@ static void p9_mux_poll_stop(struct p9_conn *m)
 static struct p9_conn *p9_conn_create(struct p9_trans *trans)
 {
 	int i, n;
-	struct p9_conn *m, *mtmp;
+	struct p9_conn *m;
 
 	P9_DPRINTK(P9_DEBUG_MUX, "transport %p msize %d\n", trans,
 								trans->msize);
-	m = kmalloc(sizeof(struct p9_conn), GFP_KERNEL);
+	m = kzalloc(sizeof(struct p9_conn), GFP_KERNEL);
 	if (!m)
 		return ERR_PTR(-ENOMEM);
 
@@ -422,24 +422,14 @@ static struct p9_conn *p9_conn_create(struct p9_trans *trans)
 	m->trans = trans;
 	m->tagpool = p9_idpool_create();
 	if (IS_ERR(m->tagpool)) {
-		mtmp = ERR_PTR(-ENOMEM);
 		kfree(m);
-		return mtmp;
+		return ERR_PTR(-ENOMEM);
 	}
 
-	m->err = 0;
 	INIT_LIST_HEAD(&m->req_list);
 	INIT_LIST_HEAD(&m->unsent_req_list);
-	m->rcall = NULL;
-	m->rpos = 0;
-	m->rbuf = NULL;
-	m->wpos = m->wsize = 0;
-	m->wbuf = NULL;
 	INIT_WORK(&m->rq, p9_read_work);
 	INIT_WORK(&m->wq, p9_write_work);
-	m->wsched = 0;
-	memset(&m->poll_waddr, 0, sizeof(m->poll_waddr));
-	m->poll_task = NULL;
 	n = p9_mux_poll_start(m);
 	if (n) {
 		kfree(m);
@@ -460,10 +450,8 @@ static struct p9_conn *p9_conn_create(struct p9_trans *trans)
 	for (i = 0; i < ARRAY_SIZE(m->poll_waddr); i++) {
 		if (IS_ERR(m->poll_waddr[i])) {
 			p9_mux_poll_stop(m);
-			mtmp = (void *)m->poll_waddr;	/* the error code */
 			kfree(m);
-			m = mtmp;
-			break;
+			return (void *)m->poll_waddr;	/* the error code */
 		}
 	}
 
-- 
cgit v1.2.3


From ec3c68f232f6d98b4596c05c1c7551b44c617c5f Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Sep 2008 16:22:23 -0500
Subject: 9p-trans_fd: don't do fs segment mangling in p9_fd_poll()

p9_fd_poll() is never called with user pointers and f_op->poll()
doesn't expect its arguments to be from userland.  There's no need to
set kernel ds before calling f_op->poll() from p9_fd_poll().  Remove
it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
---
 net/9p/trans_fd.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index 6c88e8983750..f6d4af16cb19 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -1344,7 +1344,6 @@ p9_fd_poll(struct p9_trans *trans, struct poll_table_struct *pt)
 {
 	int ret, n;
 	struct p9_trans_fd *ts = NULL;
-	mm_segment_t oldfs;
 
 	if (trans && trans->status == Connected)
 		ts = trans->priv;
@@ -1358,24 +1357,17 @@ p9_fd_poll(struct p9_trans *trans, struct poll_table_struct *pt)
 	if (!ts->wr->f_op || !ts->wr->f_op->poll)
 		return -EIO;
 
-	oldfs = get_fs();
-	set_fs(get_ds());
-
 	ret = ts->rd->f_op->poll(ts->rd, pt);
 	if (ret < 0)
-		goto end;
+		return ret;
 
 	if (ts->rd != ts->wr) {
 		n = ts->wr->f_op->poll(ts->wr, pt);
-		if (n < 0) {
-			ret = n;
-			goto end;
-		}
+		if (n < 0)
+			return n;
 		ret = (ret & ~POLLOUT) | (n & ~POLLIN);
 	}
 
-end:
-	set_fs(oldfs);
 	return ret;
 }
 
-- 
cgit v1.2.3


From 206ca50de77033c6cc17d0e14fbb12d119a67b01 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Sep 2008 16:22:23 -0500
Subject: 9p-trans_fd: fix and clean up module init/exit paths

trans_fd leaked p9_mux_wq on module unload.  Fix it.  While at it,
collapse p9_mux_global_init() into p9_trans_fd_init().  It's easier to
follow this way and the global poll_tasks array is about to removed
anyway.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
---
 net/9p/trans_fd.c | 31 +++++++++++--------------------
 1 file changed, 11 insertions(+), 20 deletions(-)

diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index f6d4af16cb19..0b4eb5f78356 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -238,22 +238,6 @@ static int p9_conn_rpcnb(struct p9_conn *m, struct p9_fcall *tc,
 
 static void p9_conn_cancel(struct p9_conn *m, int err);
 
-static int p9_mux_global_init(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(p9_mux_poll_tasks); i++)
-		p9_mux_poll_tasks[i].task = NULL;
-
-	p9_mux_wq = create_workqueue("v9fs");
-	if (!p9_mux_wq) {
-		printk(KERN_WARNING "v9fs: mux: creating workqueue failed\n");
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
 static u16 p9_mux_get_tag(struct p9_conn *m)
 {
 	int tag;
@@ -1616,10 +1600,15 @@ static struct p9_trans_module p9_fd_trans = {
 
 int p9_trans_fd_init(void)
 {
-	int ret = p9_mux_global_init();
-	if (ret) {
-		printk(KERN_WARNING "9p: starting mux failed\n");
-		return ret;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(p9_mux_poll_tasks); i++)
+		p9_mux_poll_tasks[i].task = NULL;
+
+	p9_mux_wq = create_workqueue("v9fs");
+	if (!p9_mux_wq) {
+		printk(KERN_WARNING "v9fs: mux: creating workqueue failed\n");
+		return -ENOMEM;
 	}
 
 	v9fs_register_trans(&p9_tcp_trans);
@@ -1634,4 +1623,6 @@ void p9_trans_fd_exit(void)
 	v9fs_unregister_trans(&p9_tcp_trans);
 	v9fs_unregister_trans(&p9_unix_trans);
 	v9fs_unregister_trans(&p9_fd_trans);
+
+	destroy_workqueue(p9_mux_wq);
 }
-- 
cgit v1.2.3


From 620678244bc7b83287e2e283ed4fe6b959e94b7d Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Wed, 24 Sep 2008 16:22:22 -0500
Subject: 9p: introduce missing kfree

Error handling code following a kmalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,l;
position p1,p2;
expression *ptr != NULL;
@@

(
if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S
|
x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
)
<... when != x
     when != if (...) { <+...x...+> }
x->f = E
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
 net/9p/trans_fd.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index 0b4eb5f78356..d652baf5ff91 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -870,8 +870,10 @@ static struct p9_req *p9_send_request(struct p9_conn *m,
 	else
 		n = p9_mux_get_tag(m);
 
-	if (n < 0)
+	if (n < 0) {
+		kfree(req);
 		return ERR_PTR(-ENOMEM);
+	}
 
 	p9_set_tag(tc, n);
 
-- 
cgit v1.2.3


From 62aa528e0299ffef8e138d9d92d13e631d06c5ff Mon Sep 17 00:00:00 2001
From: Julien Brunel <brunel@diku.dk>
Date: Wed, 24 Sep 2008 16:22:22 -0500
Subject: 9p: use an IS_ERR test rather than a NULL test

In case of error, the function p9_client_walk returns an ERR pointer, but
never returns a NULL pointer.  So a NULL test that comes after an IS_ERR
test should be deleted.

The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@match_bad_null_test@
expression x, E;
statement S1,S2;
@@
x = p9_client_walk(...)
... when != x = E
*  if (x != NULL)
S1 else S2
// </smpl>

Signed-off-by: Julien Brunel <brunel@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
 fs/9p/vfs_inode.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index c95295c65045..e83aa5ebe861 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -626,8 +626,7 @@ static struct dentry *v9fs_vfs_lookup(struct inode *dir, struct dentry *dentry,
 	return NULL;
 
 error:
-	if (fid)
-		p9_client_clunk(fid);
+	p9_client_clunk(fid);
 
 	return ERR_PTR(result);
 }
-- 
cgit v1.2.3


From 16ec4700127d479143c77fd9128dfa17ab572963 Mon Sep 17 00:00:00 2001
From: Eric Van Hensbergen <ericvh@ericvh-desktop.austin.ibm.com>
Date: Wed, 24 Sep 2008 16:22:22 -0500
Subject: 9p: fix put_data error handling

Abhishek Kulkarni pointed out an inconsistency in the way
errors are returned from p9_put_data.  On deeper exploration it
seems the error handling for this path was completely wrong.
This patch adds checks for allocation problems and propagates
errors correctly.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
---
 net/9p/conv.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/net/9p/conv.c b/net/9p/conv.c
index 44547201f5bc..5ad3a3bd73b2 100644
--- a/net/9p/conv.c
+++ b/net/9p/conv.c
@@ -451,8 +451,10 @@ p9_put_data(struct cbuf *bufp, const char *data, int count,
 		   unsigned char **pdata)
 {
 	*pdata = buf_alloc(bufp, count);
+	if (*pdata == NULL)
+		return -ENOMEM;
 	memmove(*pdata, data, count);
-	return count;
+	return 0;
 }
 
 static int
@@ -460,6 +462,8 @@ p9_put_user_data(struct cbuf *bufp, const char __user *data, int count,
 		   unsigned char **pdata)
 {
 	*pdata = buf_alloc(bufp, count);
+	if (*pdata == NULL)
+		return -ENOMEM;
 	return copy_from_user(*pdata, data, count);
 }
 
-- 
cgit v1.2.3


From 8ca31ce52a5cfd03b960fd81a49197ae85d25347 Mon Sep 17 00:00:00 2001
From: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Date: Wed, 24 Sep 2008 15:53:39 -0700
Subject: netfilter: ip6t_{hbh,dst}: Rejects not-strict mode on rule insertion

The current code ignores rules for internal options in HBH/DST options
header in packet processing if 'Not strict' mode is specified (which is not
implemented). Clearly it is not expected by user.

Kernel should reject HBH/DST rule insertion with 'Not strict' mode
in the first place.

Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/netfilter/ip6t_hbh.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/net/ipv6/netfilter/ip6t_hbh.c b/net/ipv6/netfilter/ip6t_hbh.c
index 62e39ace0588..26654b26d7fa 100644
--- a/net/ipv6/netfilter/ip6t_hbh.c
+++ b/net/ipv6/netfilter/ip6t_hbh.c
@@ -97,8 +97,6 @@ hbh_mt6(const struct sk_buff *skb, const struct net_device *in,
 	hdrlen -= 2;
 	if (!(optinfo->flags & IP6T_OPTS_OPTS)) {
 		return ret;
-	} else if (optinfo->flags & IP6T_OPTS_NSTRICT) {
-		pr_debug("Not strict - not implemented");
 	} else {
 		pr_debug("Strict ");
 		pr_debug("#%d ", optinfo->optsnr);
@@ -177,6 +175,12 @@ hbh_mt6_check(const char *tablename, const void *entry,
 		pr_debug("ip6t_opts: unknown flags %X\n", optsinfo->invflags);
 		return false;
 	}
+
+	if (optsinfo->flags & IP6T_OPTS_NSTRICT) {
+		pr_debug("ip6t_opts: Not strict - not implemented");
+		return false;
+	}
+
 	return true;
 }
 
-- 
cgit v1.2.3


From b4f151ff899362fec952c45d166252c9912c041f Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 24 Sep 2008 17:48:26 +0100
Subject: MN10300: Move asm-arm/cnt32_to_63.h to include/linux/

Move asm-arm/cnt32_to_63.h to include/linux/ so that MN10300 can make
use of it too.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-pxa/time.c       |  2 +-
 arch/arm/mach-sa1100/generic.c |  2 +-
 arch/arm/mach-versatile/core.c |  2 +-
 include/linux/cnt32_to_63.h    | 80 ++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 83 insertions(+), 3 deletions(-)
 create mode 100644 include/linux/cnt32_to_63.h

diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 67e18509d7bf..b0d6b32654cf 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -17,9 +17,9 @@
 #include <linux/interrupt.h>
 #include <linux/clockchips.h>
 #include <linux/sched.h>
+#include <linux/cnt32_to_63.h>
 
 #include <asm/div64.h>
-#include <asm/cnt32_to_63.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <mach/pxa-regs.h>
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 1362994c78aa..b422526f6d8b 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -18,9 +18,9 @@
 #include <linux/ioport.h>
 #include <linux/sched.h>	/* just for sched_clock() - funny that */
 #include <linux/platform_device.h>
+#include <linux/cnt32_to_63.h>
 
 #include <asm/div64.h>
-#include <asm/cnt32_to_63.h>
 #include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index d75e795c893e..b638f10411e8 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -28,8 +28,8 @@
 #include <linux/amba/clcd.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/cnt32_to_63.h>
 
-#include <asm/cnt32_to_63.h>
 #include <asm/system.h>
 #include <mach/hardware.h>
 #include <asm/io.h>
diff --git a/include/linux/cnt32_to_63.h b/include/linux/cnt32_to_63.h
new file mode 100644
index 000000000000..8c0f9505b48c
--- /dev/null
+++ b/include/linux/cnt32_to_63.h
@@ -0,0 +1,80 @@
+/*
+ *  Extend a 32-bit counter to 63 bits
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	December 3, 2006
+ *  Copyright:	MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_CNT32_TO_63_H__
+#define __LINUX_CNT32_TO_63_H__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/* this is used only to give gcc a clue about good code generation */
+union cnt32_to_63 {
+	struct {
+#if defined(__LITTLE_ENDIAN)
+		u32 lo, hi;
+#elif defined(__BIG_ENDIAN)
+		u32 hi, lo;
+#endif
+	};
+	u64 val;
+};
+
+
+/**
+ * cnt32_to_63 - Expand a 32-bit counter to a 63-bit counter
+ * @cnt_lo: The low part of the counter
+ *
+ * Many hardware clock counters are only 32 bits wide and therefore have
+ * a relatively short period making wrap-arounds rather frequent.  This
+ * is a problem when implementing sched_clock() for example, where a 64-bit
+ * non-wrapping monotonic value is expected to be returned.
+ *
+ * To overcome that limitation, let's extend a 32-bit counter to 63 bits
+ * in a completely lock free fashion. Bits 0 to 31 of the clock are provided
+ * by the hardware while bits 32 to 62 are stored in memory.  The top bit in
+ * memory is used to synchronize with the hardware clock half-period.  When
+ * the top bit of both counters (hardware and in memory) differ then the
+ * memory is updated with a new value, incrementing it when the hardware
+ * counter wraps around.
+ *
+ * Because a word store in memory is atomic then the incremented value will
+ * always be in synch with the top bit indicating to any potential concurrent
+ * reader if the value in memory is up to date or not with regards to the
+ * needed increment.  And any race in updating the value in memory is harmless
+ * as the same value would simply be stored more than once.
+ *
+ * The only restriction for the algorithm to work properly is that this
+ * code must be executed at least once per each half period of the 32-bit
+ * counter to properly update the state bit in memory. This is usually not a
+ * problem in practice, but if it is then a kernel timer could be scheduled
+ * to manage for this code to be executed often enough.
+ *
+ * Note that the top bit (bit 63) in the returned value should be considered
+ * as garbage.  It is not cleared here because callers are likely to use a
+ * multiplier on the returned value which can get rid of the top bit
+ * implicitly by making the multiplier even, therefore saving on a runtime
+ * clear-bit instruction. Otherwise caller must remember to clear the top
+ * bit explicitly.
+ */
+#define cnt32_to_63(cnt_lo) \
+({ \
+	static volatile u32 __m_cnt_hi; \
+	union cnt32_to_63 __x; \
+	__x.hi = __m_cnt_hi; \
+	__x.lo = (cnt_lo); \
+	if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \
+		__m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \
+	__x.val; \
+})
+
+#endif
-- 
cgit v1.2.3


From 08ec3c2d45bac41c782acb4e3331ac5881b2c68a Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 24 Sep 2008 17:48:31 +0100
Subject: MN10300: Make sched_clock() report time since boot

Make sched_clock() report time since boot rather than time since last
timer interrupt.

Make sched_clock() expand and scale the 32-bit TSC value running at
IOCLK speed (~33MHz) to a 64-bit nanosecond counter, using cnt32_to_63()
acquired from the ARM arch and without using slow DIVU instructions
every call.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/kernel/time.c | 52 ++++++++++++++++++++++++++++++++++++----------
 1 file changed, 41 insertions(+), 11 deletions(-)

diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c
index babb7c2ac377..e4606586f94c 100644
--- a/arch/mn10300/kernel/time.c
+++ b/arch/mn10300/kernel/time.c
@@ -1,6 +1,6 @@
 /* MN10300 Low level time management
  *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Copyright (C) 2007-2008 Red Hat, Inc. All Rights Reserved.
  * Written by David Howells (dhowells@redhat.com)
  * - Derived from arch/i386/kernel/time.c
  *
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/profile.h>
+#include <linux/cnt32_to_63.h>
 #include <asm/irq.h>
 #include <asm/div64.h>
 #include <asm/processor.h>
@@ -40,27 +41,54 @@ static struct irqaction timer_irq = {
 	.name		= "timer",
 };
 
+static unsigned long sched_clock_multiplier;
+
 /*
  * scheduler clock - returns current time in nanosec units.
  */
 unsigned long long sched_clock(void)
 {
 	union {
-		unsigned long long l;
-		u32 w[2];
-	} quot;
+		unsigned long long ll;
+		unsigned l[2];
+	} tsc64, result;
+	unsigned long tsc, tmp;
+	unsigned product[3]; /* 96-bit intermediate value */
+
+	/* read the TSC value
+	 */
+	tsc = 0 - get_cycles(); /* get_cycles() counts down */
 
-	quot.w[0] = mn10300_last_tsc - get_cycles();
-	quot.w[1] = 1000000000;
+	/* expand to 64-bits.
+	 * - sched_clock() must be called once a minute or better or the
+	 *   following will go horribly wrong - see cnt32_to_63()
+	 */
+	tsc64.ll = cnt32_to_63(tsc) & 0x7fffffffffffffffULL;
 
-	asm("mulu %2,%3,%0,%1"
-	    : "=r"(quot.w[1]), "=r"(quot.w[0])
-	    : "0"(quot.w[1]), "1"(quot.w[0])
+	/* scale the 64-bit TSC value to a nanosecond value via a 96-bit
+	 * intermediate
+	 */
+	asm("mulu	%2,%0,%3,%0	\n"	/* LSW * mult ->  0:%3:%0 */
+	    "mulu	%2,%1,%2,%1	\n"	/* MSW * mult -> %2:%1:0 */
+	    "add	%3,%1		\n"
+	    "addc	0,%2		\n"	/* result in %2:%1:%0 */
+	    : "=r"(product[0]), "=r"(product[1]), "=r"(product[2]), "=r"(tmp)
+	    :  "0"(tsc64.l[0]),  "1"(tsc64.l[1]),  "2"(sched_clock_multiplier)
 	    : "cc");
 
-	do_div(quot.l, MN10300_TSCCLK);
+	result.l[0] = product[1] << 16 | product[0] >> 16;
+	result.l[1] = product[2] << 16 | product[1] >> 16;
 
-	return quot.l;
+	return result.ll;
+}
+
+/*
+ * initialise the scheduler clock
+ */
+static void __init mn10300_sched_clock_init(void)
+{
+	sched_clock_multiplier =
+		__muldiv64u(NSEC_PER_SEC, 1 << 16, MN10300_TSCCLK);
 }
 
 /*
@@ -128,4 +156,6 @@ void __init time_init(void)
 	/* start the watchdog timer */
 	watchdog_go();
 #endif
+
+	mn10300_sched_clock_init();
 }
-- 
cgit v1.2.3


From 399ccdc1cd4e92e541d4dacbbf18c52bd693418b Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Thu, 25 Sep 2008 14:51:03 +0200
Subject: ALSA: fix locking in snd_pcm_open*() and snd_rawmidi_open*()

The PCM and rawmidi open callbacks have a lock against card->controls_list
but it takes a wrong one, card->controls_rwsem, instead of a right one
card->ctl_files_rwlock.  This patch fixes them.

This change also fixes automatically the potential deadlocks due to
mm->mmap_sem in munmap and copy_from/to_user, reported by Sitsofe
Wheeler:

  A: snd_ctl_elem_user_tlv(): card->controls_rwsem => mm->mmap_sem
  B: snd_pcm_open(): card->open_mutex => card->controls_rwsem
  C: munmap: mm->mmap_sem => snd_pcm_release(): card->open_mutex

The patch breaks the chain.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/core/pcm.c     | 4 ++--
 sound/core/rawmidi.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/core/pcm.c b/sound/core/pcm.c
index 9dd9bc73fe1d..ece25c718e95 100644
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -781,7 +781,7 @@ int snd_pcm_attach_substream(struct snd_pcm *pcm, int stream,
 		return -ENODEV;
 
 	card = pcm->card;
-	down_read(&card->controls_rwsem);
+	read_lock(&card->ctl_files_rwlock);
 	list_for_each_entry(kctl, &card->ctl_files, list) {
 		if (kctl->pid == current->pid) {
 			prefer_subdevice = kctl->prefer_pcm_subdevice;
@@ -789,7 +789,7 @@ int snd_pcm_attach_substream(struct snd_pcm *pcm, int stream,
 				break;
 		}
 	}
-	up_read(&card->controls_rwsem);
+	read_unlock(&card->ctl_files_rwlock);
 
 	switch (stream) {
 	case SNDRV_PCM_STREAM_PLAYBACK:
diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c
index f7ea7287c59c..b917a9f981c7 100644
--- a/sound/core/rawmidi.c
+++ b/sound/core/rawmidi.c
@@ -418,7 +418,7 @@ static int snd_rawmidi_open(struct inode *inode, struct file *file)
 	mutex_lock(&rmidi->open_mutex);
 	while (1) {
 		subdevice = -1;
-		down_read(&card->controls_rwsem);
+		read_lock(&card->ctl_files_rwlock);
 		list_for_each_entry(kctl, &card->ctl_files, list) {
 			if (kctl->pid == current->pid) {
 				subdevice = kctl->prefer_rawmidi_subdevice;
@@ -426,7 +426,7 @@ static int snd_rawmidi_open(struct inode *inode, struct file *file)
 					break;
 			}
 		}
-		up_read(&card->controls_rwsem);
+		read_unlock(&card->ctl_files_rwlock);
 		err = snd_rawmidi_kernel_open(rmidi->card, rmidi->device,
 					      subdevice, fflags, rawmidi_file);
 		if (err >= 0)
-- 
cgit v1.2.3


From 24e8fc498e9618338854bfbcf8d1d737e0bf1775 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Thu, 25 Sep 2008 17:51:11 +0200
Subject: ALSA: remove unneeded power_mutex lock in snd_pcm_drop

The power_mutex lock in snd_pcm_drop may cause a possible deadlock
chain, and above all, it's unneeded.  Let's get rid of it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/core/pcm_native.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index c49b9d9e303c..c487025d3457 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -1546,16 +1546,10 @@ static int snd_pcm_drop(struct snd_pcm_substream *substream)
 	card = substream->pcm->card;
 
 	if (runtime->status->state == SNDRV_PCM_STATE_OPEN ||
-	    runtime->status->state == SNDRV_PCM_STATE_DISCONNECTED)
+	    runtime->status->state == SNDRV_PCM_STATE_DISCONNECTED ||
+	    runtime->status->state == SNDRV_PCM_STATE_SUSPENDED)
 		return -EBADFD;
 
-	snd_power_lock(card);
-	if (runtime->status->state == SNDRV_PCM_STATE_SUSPENDED) {
-		result = snd_power_wait(card, SNDRV_CTL_POWER_D0);
-		if (result < 0)
-			goto _unlock;
-	}
-
 	snd_pcm_stream_lock_irq(substream);
 	/* resume pause */
 	if (runtime->status->state == SNDRV_PCM_STATE_PAUSED)
@@ -1564,8 +1558,7 @@ static int snd_pcm_drop(struct snd_pcm_substream *substream)
 	snd_pcm_stop(substream, SNDRV_PCM_STATE_SETUP);
 	/* runtime->control->appl_ptr = runtime->status->hw_ptr; */
 	snd_pcm_stream_unlock_irq(substream);
- _unlock:
-	snd_power_unlock(card);
+
 	return result;
 }
 
-- 
cgit v1.2.3


From 6ef190cc92e33565accff6a320f0e7d90480bfe7 Mon Sep 17 00:00:00 2001
From: Roland Dreier <rolandd@cisco.com>
Date: Thu, 25 Sep 2008 15:28:08 -0700
Subject: IPoIB: Fix crash when path record fails after path flush

Commit ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM
change events") changed how paths are flushed on an SM event.  This
change introduces a problem if the path record query triggered by
fails, causing path->ah to become NULL.  A later successful path query
will then trigger WARN_ON() in path_rec_completion(), and crash
because path->ah has already been freed, so the ipoib_put_ah() inside
the lock in path_rec_completion() may actually drop the last reference
(contrary to the comment that claims this is safe).

Fix this by updating path->ah and freeing old_ah only when the path
record query is successful.  This prevents the neighbour AH and that
path AH from getting out of sync.

This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1194>

Reported-by: Rabah Salem <ravah@mellanox.com>
Debugged-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/infiniband/ulp/ipoib/ipoib_main.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 1b1df5cc4113..e9ca3cb57d52 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -404,7 +404,7 @@ static void path_rec_completion(int status,
 	struct net_device *dev = path->dev;
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
 	struct ipoib_ah *ah = NULL;
-	struct ipoib_ah *old_ah;
+	struct ipoib_ah *old_ah = NULL;
 	struct ipoib_neigh *neigh, *tn;
 	struct sk_buff_head skqueue;
 	struct sk_buff *skb;
@@ -428,12 +428,12 @@ static void path_rec_completion(int status,
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	old_ah   = path->ah;
-	path->ah = ah;
-
 	if (ah) {
 		path->pathrec = *pathrec;
 
+		old_ah   = path->ah;
+		path->ah = ah;
+
 		ipoib_dbg(priv, "created address handle %p for LID 0x%04x, SL %d\n",
 			  ah, be16_to_cpu(pathrec->dlid), pathrec->sl);
 
-- 
cgit v1.2.3


From f1ccd2955157e1aff992f6aaaba0944209076220 Mon Sep 17 00:00:00 2001
From: Lachlan McIlroy <lachlan@sgi.com>
Date: Fri, 26 Sep 2008 12:16:46 +1000
Subject: [XFS] Fix extent list corruption in xfs_iext_irec_compact_full().

If we don't move all the records from the next buffer into the current
buffer then we need to update the er_extoff field of the next buffer as we
shift the remaining records to the start of the buffer.

SGI-PV: 987159

SGI-Modid: xfs-linux-melb:xfs-kern:32165a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Russell Cattelan <cattelan@thebarn.com>
---
 fs/xfs/xfs_inode.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index 00e80df9dd9d..419cfc2eacb3 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -4584,6 +4584,7 @@ xfs_iext_irec_compact_full(
 					(XFS_LINEAR_EXTS -
 						erp_next->er_extcount) *
 					sizeof(xfs_bmbt_rec_t));
+				erp_next->er_extoff += ext_diff;
 			}
 		}
 
-- 
cgit v1.2.3


From 71a8c87fb300b601eacf7a86cc6c6322fe827bfd Mon Sep 17 00:00:00 2001
From: Lachlan McIlroy <lachlan@sgi.com>
Date: Fri, 26 Sep 2008 12:17:57 +1000
Subject: [XFS] Remove xfs_iext_irec_compact_full()

Yet another bug was found in xfs_iext_irec_compact_full() and while the
source of the bug was found it wasn't an easy task to track it down
because the conditions are very difficult to reproduce.

A HUGE thank-you goes to Russell Cattelan and Eric Sandeen for their
significant effort in tracking down the source of this corruption.

xfs_iext_irec_compact_full() and xfs_iext_irec_compact_pages() are almost
identical - they both compact indirect extent lists by moving extents from
subsequent buffers into earlier ones. xfs_iext_irec_compact_pages() only
moves extents if all of the extents in the next buffer will fit into the
empty space in the buffer before it. xfs_iext_irec_compact_full() will go
a step further and move part of the next buffer if all the extents wont
fit. It will then shift the remaining extents in the next buffer up to the
start of the buffer. The bug here was that we did not update er_extoff and
this caused extent list corruption.

It does not appear that this extra functionality gains us much. Calling
xfs_iext_irec_compact_pages() instead will do a good enough job at
compacting the indirect list and will be quicker too.

For the case in xfs_iext_indirect_to_direct() the total number of extents
in the indirect list will fit into one buffer so we will never need the
extra functionality of xfs_iext_irec_compact_full() there.

Also xfs_iext_irec_compact_pages() doesn't need to do a memmove() (the
buffers will never overlap) so we don't want the performance hit that can
incur.

SGI-PV: 987159

SGI-Modid: xfs-linux-melb:xfs-kern:32166a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
---
 fs/xfs/xfs_inode.c | 95 ++----------------------------------------------------
 1 file changed, 3 insertions(+), 92 deletions(-)

diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index 419cfc2eacb3..dbd9cef852ec 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -4118,7 +4118,7 @@ xfs_iext_indirect_to_direct(
 	ASSERT(nextents <= XFS_LINEAR_EXTS);
 	size = nextents * sizeof(xfs_bmbt_rec_t);
 
-	xfs_iext_irec_compact_full(ifp);
+	xfs_iext_irec_compact_pages(ifp);
 	ASSERT(ifp->if_real_bytes == XFS_IEXT_BUFSZ);
 
 	ep = ifp->if_u1.if_ext_irec->er_extbuf;
@@ -4449,8 +4449,7 @@ xfs_iext_irec_remove(
  * compaction policy is as follows:
  *
  *    Full Compaction: Extents fit into a single page (or inline buffer)
- *    Full Compaction: Extents occupy less than 10% of allocated space
- * Partial Compaction: Extents occupy > 10% and < 50% of allocated space
+ * Partial Compaction: Extents occupy less than 50% of allocated space
  *      No Compaction: Extents occupy at least 50% of allocated space
  */
 void
@@ -4471,8 +4470,6 @@ xfs_iext_irec_compact(
 		xfs_iext_direct_to_inline(ifp, nextents);
 	} else if (nextents <= XFS_LINEAR_EXTS) {
 		xfs_iext_indirect_to_direct(ifp);
-	} else if (nextents < (nlists * XFS_LINEAR_EXTS) >> 3) {
-		xfs_iext_irec_compact_full(ifp);
 	} else if (nextents < (nlists * XFS_LINEAR_EXTS) >> 1) {
 		xfs_iext_irec_compact_pages(ifp);
 	}
@@ -4496,7 +4493,7 @@ xfs_iext_irec_compact_pages(
 		erp_next = erp + 1;
 		if (erp_next->er_extcount <=
 		    (XFS_LINEAR_EXTS - erp->er_extcount)) {
-			memmove(&erp->er_extbuf[erp->er_extcount],
+			memcpy(&erp->er_extbuf[erp->er_extcount],
 				erp_next->er_extbuf, erp_next->er_extcount *
 				sizeof(xfs_bmbt_rec_t));
 			erp->er_extcount += erp_next->er_extcount;
@@ -4515,92 +4512,6 @@ xfs_iext_irec_compact_pages(
 	}
 }
 
-/*
- * Fully compact the extent records managed by the indirection array.
- */
-void
-xfs_iext_irec_compact_full(
-	xfs_ifork_t	*ifp)			/* inode fork pointer */
-{
-	xfs_bmbt_rec_host_t *ep, *ep_next;	/* extent record pointers */
-	xfs_ext_irec_t	*erp, *erp_next;	/* extent irec pointers */
-	int		erp_idx = 0;		/* extent irec index */
-	int		ext_avail;		/* empty entries in ex list */
-	int		ext_diff;		/* number of exts to add */
-	int		nlists;			/* number of irec's (ex lists) */
-
-	ASSERT(ifp->if_flags & XFS_IFEXTIREC);
-
-	nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ;
-	erp = ifp->if_u1.if_ext_irec;
-	ep = &erp->er_extbuf[erp->er_extcount];
-	erp_next = erp + 1;
-	ep_next = erp_next->er_extbuf;
-
-	while (erp_idx < nlists - 1) {
-		/*
-		 * Check how many extent records are available in this irec.
-		 * If there is none skip the whole exercise.
-		 */
-		ext_avail = XFS_LINEAR_EXTS - erp->er_extcount;
-		if (ext_avail) {
-
-			/*
-			 * Copy over as many as possible extent records into
-			 * the previous page.
-			 */
-			ext_diff = MIN(ext_avail, erp_next->er_extcount);
-			memcpy(ep, ep_next, ext_diff * sizeof(xfs_bmbt_rec_t));
-			erp->er_extcount += ext_diff;
-			erp_next->er_extcount -= ext_diff;
-
-			/*
-			 * If the next irec is empty now we can simply
-			 * remove it.
-			 */
-			if (erp_next->er_extcount == 0) {
-				/*
-				 * Free page before removing extent record
-				 * so er_extoffs don't get modified in
-				 * xfs_iext_irec_remove.
-				 */
-				kmem_free(erp_next->er_extbuf);
-				erp_next->er_extbuf = NULL;
-				xfs_iext_irec_remove(ifp, erp_idx + 1);
-				erp = &ifp->if_u1.if_ext_irec[erp_idx];
-				nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ;
-
-			/*
-			 * If the next irec is not empty move up the content
-			 * that has not been copied to the previous page to
-			 * the beggining of this one.
-			 */
-			} else {
-				memmove(erp_next->er_extbuf, &ep_next[ext_diff],
-					erp_next->er_extcount *
-					sizeof(xfs_bmbt_rec_t));
-				ep_next = erp_next->er_extbuf;
-				memset(&ep_next[erp_next->er_extcount], 0,
-					(XFS_LINEAR_EXTS -
-						erp_next->er_extcount) *
-					sizeof(xfs_bmbt_rec_t));
-				erp_next->er_extoff += ext_diff;
-			}
-		}
-
-		if (erp->er_extcount == XFS_LINEAR_EXTS) {
-			erp_idx++;
-			if (erp_idx < nlists)
-				erp = &ifp->if_u1.if_ext_irec[erp_idx];
-			else
-				break;
-		}
-		ep = &erp->er_extbuf[erp->er_extcount];
-		erp_next = erp + 1;
-		ep_next = erp_next->er_extbuf;
-	}
-}
-
 /*
  * This is called to update the er_extoff field in the indirection
  * array when extents have been added or removed from one of the
-- 
cgit v1.2.3


From 18d6522b86d21a04c8ac1ea79747e2e434a956d9 Mon Sep 17 00:00:00 2001
From: Atsuo Igarashi <atsuo_igarashi@tripeaks.co.jp>
Date: Fri, 26 Sep 2008 10:36:41 -0500
Subject: kgdb: could not write to the last of valid memory with kgdb

On the ARM architecture, kgdb will crash the kernel if the last byte
of valid memory is written due to a flush_icache_range flushing
beyond the memory boundary.

Signed-off-by: Atsuo Igarashi <atsuo_igarashi@tripeaks.co.jp>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
 kernel/kgdb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/kgdb.c b/kernel/kgdb.c
index eaa21fc9ad1d..949806ab67de 100644
--- a/kernel/kgdb.c
+++ b/kernel/kgdb.c
@@ -488,7 +488,7 @@ static int write_mem_msg(int binary)
 		if (err)
 			return err;
 		if (CACHE_FLUSH_IS_SAFE)
-			flush_icache_range(addr, addr + length + 1);
+			flush_icache_range(addr, addr + length);
 		return 0;
 	}
 
-- 
cgit v1.2.3


From d7161a65341556bacb5e6654e133803f46f51063 Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Fri, 26 Sep 2008 10:36:41 -0500
Subject: kgdb, x86, arm, mips, powerpc: ignore user space single stepping

On the x86 arch, user space single step exceptions should be ignored
if they occur in the kernel space, such as ptrace stepping through a
system call.

First check if it is kgdb that is executing a single step, then ensure
it is not an accidental traversal into the user space, while in kgdb,
any other time the TIF_SINGLESTEP is set, kgdb should ignore the
exception.

On x86, arm, mips and powerpc, the kgdb_contthread usage was
inconsistent with the way single stepping is implemented in the kgdb
core.  The arch specific stub should always set the
kgdb_cpu_doing_single_step correctly if it is single stepping.  This
allows kgdb to correctly process an instruction steps if ptrace
happens to be requesting an instruction step over a system call.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
 arch/arm/kernel/kgdb.c     |  2 --
 arch/mips/kernel/kgdb.c    |  3 +--
 arch/powerpc/kernel/kgdb.c |  5 ++---
 arch/x86/kernel/kgdb.c     | 18 +++++++++++-------
 kernel/kgdb.c              |  8 ++++----
 5 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
index aaffaecffcd1..ba8ccfede964 100644
--- a/arch/arm/kernel/kgdb.c
+++ b/arch/arm/kernel/kgdb.c
@@ -111,8 +111,6 @@ int kgdb_arch_handle_exception(int exception_vector, int signo,
 	case 'D':
 	case 'k':
 	case 'c':
-		kgdb_contthread = NULL;
-
 		/*
 		 * Try to read optional parameter, pc unchanged if no parm.
 		 * If this was a compiled breakpoint, we need to move
diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
index 8f6d58ede33c..6e152c80cd4a 100644
--- a/arch/mips/kernel/kgdb.c
+++ b/arch/mips/kernel/kgdb.c
@@ -236,8 +236,7 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code,
 
 		atomic_set(&kgdb_cpu_doing_single_step, -1);
 		if (remcom_in_buffer[0] == 's')
-			if (kgdb_contthread)
-				atomic_set(&kgdb_cpu_doing_single_step, cpu);
+			atomic_set(&kgdb_cpu_doing_single_step, cpu);
 
 		return 0;
 	}
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index b4fdf2f2743c..fe8f71dd0b3f 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -347,9 +347,8 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code,
 			linux_regs->msr |= MSR_SE;
 #endif
 			kgdb_single_step = 1;
-			if (kgdb_contthread)
-				atomic_set(&kgdb_cpu_doing_single_step,
-					   raw_smp_processor_id());
+			atomic_set(&kgdb_cpu_doing_single_step,
+				   raw_smp_processor_id());
 		}
 		return 0;
 	}
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index f47f0eb886b8..00f7896c9a19 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -378,10 +378,8 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
 		if (remcomInBuffer[0] == 's') {
 			linux_regs->flags |= X86_EFLAGS_TF;
 			kgdb_single_step = 1;
-			if (kgdb_contthread) {
-				atomic_set(&kgdb_cpu_doing_single_step,
-					   raw_smp_processor_id());
-			}
+			atomic_set(&kgdb_cpu_doing_single_step,
+				   raw_smp_processor_id());
 		}
 
 		get_debugreg(dr6, 6);
@@ -466,9 +464,15 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd)
 
 	case DIE_DEBUG:
 		if (atomic_read(&kgdb_cpu_doing_single_step) ==
-			raw_smp_processor_id() &&
-			user_mode(regs))
-			return single_step_cont(regs, args);
+		    raw_smp_processor_id()) {
+			if (user_mode(regs))
+				return single_step_cont(regs, args);
+			break;
+		} else if (test_thread_flag(TIF_SINGLESTEP))
+			/* This means a user thread is single stepping
+			 * a system call which should be ignored
+			 */
+			return NOTIFY_DONE;
 		/* fall through */
 	default:
 		if (user_mode(regs))
diff --git a/kernel/kgdb.c b/kernel/kgdb.c
index 949806ab67de..25d955dbb989 100644
--- a/kernel/kgdb.c
+++ b/kernel/kgdb.c
@@ -1462,7 +1462,7 @@ acquirelock:
 	 * Get the passive CPU lock which will hold all the non-primary
 	 * CPU in a spin state while the debugger is active
 	 */
-	if (!kgdb_single_step || !kgdb_contthread) {
+	if (!kgdb_single_step) {
 		for (i = 0; i < NR_CPUS; i++)
 			atomic_set(&passive_cpu_wait[i], 1);
 	}
@@ -1475,7 +1475,7 @@ acquirelock:
 
 #ifdef CONFIG_SMP
 	/* Signal the other CPUs to enter kgdb_wait() */
-	if ((!kgdb_single_step || !kgdb_contthread) && kgdb_do_roundup)
+	if ((!kgdb_single_step) && kgdb_do_roundup)
 		kgdb_roundup_cpus(flags);
 #endif
 
@@ -1494,7 +1494,7 @@ acquirelock:
 	kgdb_post_primary_code(ks->linux_regs, ks->ex_vector, ks->err_code);
 	kgdb_deactivate_sw_breakpoints();
 	kgdb_single_step = 0;
-	kgdb_contthread = NULL;
+	kgdb_contthread = current;
 	exception_level = 0;
 
 	/* Talk to debugger with gdbserial protocol */
@@ -1508,7 +1508,7 @@ acquirelock:
 	kgdb_info[ks->cpu].task = NULL;
 	atomic_set(&cpu_in_kgdb[ks->cpu], 0);
 
-	if (!kgdb_single_step || !kgdb_contthread) {
+	if (!kgdb_single_step) {
 		for (i = NR_CPUS-1; i >= 0; i--)
 			atomic_set(&passive_cpu_wait[i], 0);
 		/*
-- 
cgit v1.2.3


From 95dbf1dbe39ed336a3e72116c95cfa98dd3457e6 Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Fri, 26 Sep 2008 10:36:42 -0500
Subject: kgdb, x86_64: gdb serial has BX and DX reversed

The BX and DX registers in the gdb serial register packet need to be
flipped for gdb to receive the correct data.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
 include/asm-x86/kgdb.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/asm-x86/kgdb.h b/include/asm-x86/kgdb.h
index 484c47554f3b..e86b3060bdcb 100644
--- a/include/asm-x86/kgdb.h
+++ b/include/asm-x86/kgdb.h
@@ -42,9 +42,9 @@ enum regnames {
 #else /* ! CONFIG_X86_32 */
 enum regnames {
 	GDB_AX,			/* 0 */
-	GDB_DX,			/* 1 */
+	GDB_BX,			/* 1 */
 	GDB_CX,			/* 2 */
-	GDB_BX,			/* 3 */
+	GDB_DX,			/* 3 */
 	GDB_SI,			/* 4 */
 	GDB_DI,			/* 5 */
 	GDB_BP,			/* 6 */
-- 
cgit v1.2.3


From 703a1edcd1534468fc18f733c03bd91a65c8c6f0 Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Fri, 26 Sep 2008 10:36:42 -0500
Subject: kgdb, x86_64: fix PS CS SS registers in gdb serial

On x86_64 the gdb serial register structure defines the PS (also known
as eflags), CS and SS registers as 4 bytes entities.

This patch splits the x86_64 regnames enum into a 32 and 64 version to
account for the 32 bit entities in the gdb serial packets.

Also the program counter is properly filled in for the sleeping
threads.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
 arch/x86/kernel/kgdb.c | 25 +++++++++++++++++++++----
 include/asm-x86/kgdb.h | 20 +++++++++-----------
 2 files changed, 30 insertions(+), 15 deletions(-)

diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index 00f7896c9a19..8282a2139681 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -69,6 +69,9 @@ static int gdb_x86vector = -1;
  */
 void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 {
+#ifndef CONFIG_X86_32
+	u32 *gdb_regs32 = (u32 *)gdb_regs;
+#endif
 	gdb_regs[GDB_AX]	= regs->ax;
 	gdb_regs[GDB_BX]	= regs->bx;
 	gdb_regs[GDB_CX]	= regs->cx;
@@ -76,9 +79,9 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	gdb_regs[GDB_SI]	= regs->si;
 	gdb_regs[GDB_DI]	= regs->di;
 	gdb_regs[GDB_BP]	= regs->bp;
-	gdb_regs[GDB_PS]	= regs->flags;
 	gdb_regs[GDB_PC]	= regs->ip;
 #ifdef CONFIG_X86_32
+	gdb_regs[GDB_PS]	= regs->flags;
 	gdb_regs[GDB_DS]	= regs->ds;
 	gdb_regs[GDB_ES]	= regs->es;
 	gdb_regs[GDB_CS]	= regs->cs;
@@ -94,6 +97,9 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	gdb_regs[GDB_R13]	= regs->r13;
 	gdb_regs[GDB_R14]	= regs->r14;
 	gdb_regs[GDB_R15]	= regs->r15;
+	gdb_regs32[GDB_PS]	= regs->flags;
+	gdb_regs32[GDB_CS]	= regs->cs;
+	gdb_regs32[GDB_SS]	= regs->ss;
 #endif
 	gdb_regs[GDB_SP]	= regs->sp;
 }
@@ -112,6 +118,9 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
  */
 void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
 {
+#ifndef CONFIG_X86_32
+	u32 *gdb_regs32 = (u32 *)gdb_regs;
+#endif
 	gdb_regs[GDB_AX]	= 0;
 	gdb_regs[GDB_BX]	= 0;
 	gdb_regs[GDB_CX]	= 0;
@@ -129,8 +138,10 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
 	gdb_regs[GDB_FS]	= 0xFFFF;
 	gdb_regs[GDB_GS]	= 0xFFFF;
 #else
-	gdb_regs[GDB_PS]	= *(unsigned long *)(p->thread.sp + 8);
-	gdb_regs[GDB_PC]	= 0;
+	gdb_regs32[GDB_PS]	= *(unsigned long *)(p->thread.sp + 8);
+	gdb_regs32[GDB_CS]	= __KERNEL_CS;
+	gdb_regs32[GDB_SS]	= __KERNEL_DS;
+	gdb_regs[GDB_PC]	= p->thread.ip;
 	gdb_regs[GDB_R8]	= 0;
 	gdb_regs[GDB_R9]	= 0;
 	gdb_regs[GDB_R10]	= 0;
@@ -153,6 +164,9 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
  */
 void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 {
+#ifndef CONFIG_X86_32
+	u32 *gdb_regs32 = (u32 *)gdb_regs;
+#endif
 	regs->ax		= gdb_regs[GDB_AX];
 	regs->bx		= gdb_regs[GDB_BX];
 	regs->cx		= gdb_regs[GDB_CX];
@@ -160,9 +174,9 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	regs->si		= gdb_regs[GDB_SI];
 	regs->di		= gdb_regs[GDB_DI];
 	regs->bp		= gdb_regs[GDB_BP];
-	regs->flags		= gdb_regs[GDB_PS];
 	regs->ip		= gdb_regs[GDB_PC];
 #ifdef CONFIG_X86_32
+	regs->flags		= gdb_regs[GDB_PS];
 	regs->ds		= gdb_regs[GDB_DS];
 	regs->es		= gdb_regs[GDB_ES];
 	regs->cs		= gdb_regs[GDB_CS];
@@ -175,6 +189,9 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	regs->r13		= gdb_regs[GDB_R13];
 	regs->r14		= gdb_regs[GDB_R14];
 	regs->r15		= gdb_regs[GDB_R15];
+	regs->flags		= gdb_regs32[GDB_PS];
+	regs->cs		= gdb_regs32[GDB_CS];
+	regs->ss		= gdb_regs32[GDB_SS];
 #endif
 }
 
diff --git a/include/asm-x86/kgdb.h b/include/asm-x86/kgdb.h
index e86b3060bdcb..94d63db10365 100644
--- a/include/asm-x86/kgdb.h
+++ b/include/asm-x86/kgdb.h
@@ -39,8 +39,9 @@ enum regnames {
 	GDB_FS,			/* 14 */
 	GDB_GS,			/* 15 */
 };
+#define NUMREGBYTES		((GDB_GS+1)*4)
 #else /* ! CONFIG_X86_32 */
-enum regnames {
+enum regnames64 {
 	GDB_AX,			/* 0 */
 	GDB_BX,			/* 1 */
 	GDB_CX,			/* 2 */
@@ -58,18 +59,15 @@ enum regnames {
 	GDB_R14,		/* 14 */
 	GDB_R15,		/* 15 */
 	GDB_PC,			/* 16 */
-	GDB_PS,			/* 17 */
 };
-#endif /* CONFIG_X86_32 */
 
-/*
- * Number of bytes of registers:
- */
-#ifdef CONFIG_X86_32
-# define NUMREGBYTES		64
-#else
-# define NUMREGBYTES		((GDB_PS+1)*8)
-#endif
+enum regnames32 {
+	GDB_PS = 34,
+	GDB_CS,
+	GDB_SS,
+};
+#define NUMREGBYTES		((GDB_SS+1)*4)
+#endif /* CONFIG_X86_32 */
 
 static inline void arch_kgdb_breakpoint(void)
 {
-- 
cgit v1.2.3


From 0dca0fd2bfeb99738708d6c9117994ebf398e72c Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Fri, 26 Sep 2008 10:36:42 -0500
Subject: kgdboc,tty: Fix tty polling search to use name correctly

The tty_find_polling_driver() routine did not correctly check the base
part of the tty name.  This can lead to kgdboc selecting an incorrect
driver, as well as accepting a completely invalid tty such as "echo
ffff0 > /sys/module/kgdboc/parameters/kgdboc".

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
 drivers/char/tty_io.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index daeb8f766971..e4dce8709541 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -695,13 +695,23 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line)
 {
 	struct tty_driver *p, *res = NULL;
 	int tty_line = 0;
+	int len;
 	char *str;
 
+	for (str = name; *str; str++)
+		if ((*str >= '0' && *str <= '9') || *str == ',')
+			break;
+	if (!*str)
+		return NULL;
+
+	len = str - name;
+	tty_line = simple_strtoul(str, &str, 10);
+
 	mutex_lock(&tty_mutex);
 	/* Search through the tty devices to look for a match */
 	list_for_each_entry(p, &tty_drivers, tty_drivers) {
-		str = name + strlen(p->name);
-		tty_line = simple_strtoul(str, &str, 10);
+		if (strncmp(name, p->name, len) != 0)
+			continue;
 		if (*str == ',')
 			str++;
 		if (*str == '\0')
-- 
cgit v1.2.3


From bc173c5789e1fc6065fd378edc815914b40ee86b Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Fri, 26 Sep 2008 16:22:58 +0100
Subject: ARM: Delete ARM's own cnt32_to_63.h

Delete ARM's own cnt32_to_63.h as the copy in include/linux/ should now be
used instead.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/include/asm/cnt32_to_63.h | 78 --------------------------------------
 1 file changed, 78 deletions(-)
 delete mode 100644 arch/arm/include/asm/cnt32_to_63.h

diff --git a/arch/arm/include/asm/cnt32_to_63.h b/arch/arm/include/asm/cnt32_to_63.h
deleted file mode 100644
index 480c873fa746..000000000000
--- a/arch/arm/include/asm/cnt32_to_63.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- *  include/asm/cnt32_to_63.h -- extend a 32-bit counter to 63 bits
- *
- *  Author:	Nicolas Pitre
- *  Created:	December 3, 2006
- *  Copyright:	MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- */
-
-#ifndef __INCLUDE_CNT32_TO_63_H__
-#define __INCLUDE_CNT32_TO_63_H__
-
-#include <linux/compiler.h>
-#include <asm/types.h>
-#include <asm/byteorder.h>
-
-/*
- * Prototype: u64 cnt32_to_63(u32 cnt)
- * Many hardware clock counters are only 32 bits wide and therefore have
- * a relatively short period making wrap-arounds rather frequent.  This
- * is a problem when implementing sched_clock() for example, where a 64-bit
- * non-wrapping monotonic value is expected to be returned.
- *
- * To overcome that limitation, let's extend a 32-bit counter to 63 bits
- * in a completely lock free fashion. Bits 0 to 31 of the clock are provided
- * by the hardware while bits 32 to 62 are stored in memory.  The top bit in
- * memory is used to synchronize with the hardware clock half-period.  When
- * the top bit of both counters (hardware and in memory) differ then the
- * memory is updated with a new value, incrementing it when the hardware
- * counter wraps around.
- *
- * Because a word store in memory is atomic then the incremented value will
- * always be in synch with the top bit indicating to any potential concurrent
- * reader if the value in memory is up to date or not with regards to the
- * needed increment.  And any race in updating the value in memory is harmless
- * as the same value would simply be stored more than once.
- *
- * The only restriction for the algorithm to work properly is that this
- * code must be executed at least once per each half period of the 32-bit
- * counter to properly update the state bit in memory. This is usually not a
- * problem in practice, but if it is then a kernel timer could be scheduled
- * to manage for this code to be executed often enough.
- *
- * Note that the top bit (bit 63) in the returned value should be considered
- * as garbage.  It is not cleared here because callers are likely to use a
- * multiplier on the returned value which can get rid of the top bit
- * implicitly by making the multiplier even, therefore saving on a runtime
- * clear-bit instruction. Otherwise caller must remember to clear the top
- * bit explicitly.
- */
-
-/* this is used only to give gcc a clue about good code generation */
-typedef union {
-	struct {
-#if defined(__LITTLE_ENDIAN)
-		u32 lo, hi;
-#elif defined(__BIG_ENDIAN)
-		u32 hi, lo;
-#endif
-	};
-	u64 val;
-} cnt32_to_63_t;
-
-#define cnt32_to_63(cnt_lo) \
-({ \
-	static volatile u32 __m_cnt_hi = 0; \
-	cnt32_to_63_t __x; \
-	__x.hi = __m_cnt_hi; \
-	__x.lo = (cnt_lo); \
- 	if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \
-		__m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \
-	__x.val; \
-})
-
-#endif
-- 
cgit v1.2.3


From 1575da9ee4804ca889f32f8567dd7965e6fe4abc Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 24 Sep 2008 14:57:11 +0900
Subject: m32r: remove the unused NOHIGHMEM option

Remove the unused NOHIGHMEM option.

Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
---
 arch/m32r/Kconfig | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index a5f864c445b2..0266519491a4 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -216,10 +216,6 @@ config MEMORY_SIZE
 	default "01000000" if PLAT_M32104UT
 	default "00800000" if PLAT_OAKS32R
 
-config NOHIGHMEM
-	bool
-	default y
-
 config ARCH_DISCONTIGMEM_ENABLE
 	bool "Internal RAM Support"
 	depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104
-- 
cgit v1.2.3


From 1b20b093e7f81ff8cb322773684b260d1487b610 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 24 Sep 2008 14:58:54 +0900
Subject: m32r: don't offer CONFIG_ISA

As far as I know no M32R hardware actually has ISA slots.

And ISA drivers don't compile on M32R.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
---
 arch/m32r/Kconfig | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index 0266519491a4..f57113f1f892 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -406,11 +406,7 @@ config PCI_DIRECT
 source "drivers/pci/Kconfig"
 
 config ISA
-	bool "ISA support"
-	help
-	  Find out whether you have ISA slots on your motherboard.  ISA is the
-	  name of a bus system, i.e. the way the CPU talks to the other stuff
-	  inside your box.  If you have ISA, say Y, otherwise N.
+	bool
 
 source "drivers/pcmcia/Kconfig"
 
-- 
cgit v1.2.3


From affa6b120fa895e2bed0e131282fe89c05da1008 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 24 Sep 2008 14:59:57 +0900
Subject: m32r: export empty_zero_page

ERROR: "empty_zero_page" [fs/ext4/ext4dev.ko] undefined!

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
---
 arch/m32r/kernel/m32r_ksyms.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/m32r/kernel/m32r_ksyms.c b/arch/m32r/kernel/m32r_ksyms.c
index 16bcb189a383..22624b51d4d3 100644
--- a/arch/m32r/kernel/m32r_ksyms.c
+++ b/arch/m32r/kernel/m32r_ksyms.c
@@ -14,6 +14,7 @@
 #include <asm/delay.h>
 #include <asm/irq.h>
 #include <asm/tlbflush.h>
+#include <asm/pgtable.h>
 
 /* platform dependent support */
 EXPORT_SYMBOL(boot_cpu_data);
@@ -65,6 +66,7 @@ EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(clear_page);
 EXPORT_SYMBOL(strlen);
+EXPORT_SYMBOL(empty_zero_page);
 
 EXPORT_SYMBOL(_inb);
 EXPORT_SYMBOL(_inw);
-- 
cgit v1.2.3


From 4b65fd41807dec1484003a7618c492477511509e Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 24 Sep 2008 15:01:15 +0900
Subject: m32r: export __ndelay

ERROR: "__ndelay" [drivers/spi/spi_bitbang.ko] undefined!

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
---
 arch/m32r/lib/delay.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/m32r/lib/delay.c b/arch/m32r/lib/delay.c
index 59bfc34e0d9f..ced549be80f5 100644
--- a/arch/m32r/lib/delay.c
+++ b/arch/m32r/lib/delay.c
@@ -6,6 +6,7 @@
  */
 
 #include <linux/param.h>
+#include <linux/module.h>
 #ifdef CONFIG_SMP
 #include <linux/sched.h>
 #include <asm/current.h>
@@ -121,3 +122,4 @@ void __ndelay(unsigned long nsecs)
 {
 	__const_udelay(nsecs * 0x00005);  /* 2**32 / 1000000000 (rounded up) */
 }
+EXPORT_SYMBOL(__ndelay);
-- 
cgit v1.2.3


From 81e4807303c416a0defdce8b23a6204416d33280 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 24 Sep 2008 15:01:47 +0900
Subject: m32r/kernel/: cleanups

This patch contains the following cleanups:
- make the following needlessly global code static:
  - entry.S: resume_userspace
  - process.c: pm_idle
  - process.c: default_idle()
  - smp.c: send_IPI_allbutself()
  - time.c: timer_interrupt()
  - time.c: struct irq0
  - traps.c: set_eit_vector_entries()
  - traps.c: kstack_depth_to_print
  - traps.c: show_trace()
  - traps.c: die_lock
- remove the following unused code:
  - head.S: startup_32
  - process.c: hlt_counter
  - process.c: disable_hlt()
  - process.c: enable_hlt()
  - process.c: dump_task_regs()
- remove the following variables and their usages since they were
  always 0:
  - irq.c: irq_err_count
  - irq.c: irq_mis_count

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
---
 arch/m32r/kernel/entry.S   |  2 +-
 arch/m32r/kernel/head.S    |  1 -
 arch/m32r/kernel/irq.c     |  6 ------
 arch/m32r/kernel/process.c | 30 ++----------------------------
 arch/m32r/kernel/smp.c     |  4 ++--
 arch/m32r/kernel/time.c    |  5 ++---
 arch/m32r/kernel/traps.c   |  8 ++++----
 7 files changed, 11 insertions(+), 45 deletions(-)

diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S
index d4eaa2fd1818..612d35b082a6 100644
--- a/arch/m32r/kernel/entry.S
+++ b/arch/m32r/kernel/entry.S
@@ -143,7 +143,7 @@ ret_from_intr:
 	and3	r4, r4, #0x8000		; check BSM bit
 #endif
 	beqz	r4, resume_kernel
-ENTRY(resume_userspace)
+resume_userspace:
 	DISABLE_INTERRUPTS(r4)		; make sure we don't miss an interrupt
 					; setting need_resched or sigpending
 					; between sampling and the iret
diff --git a/arch/m32r/kernel/head.S b/arch/m32r/kernel/head.S
index dab7436d7bbe..40180778a5c7 100644
--- a/arch/m32r/kernel/head.S
+++ b/arch/m32r/kernel/head.S
@@ -29,7 +29,6 @@ __INITDATA
 	.global _end
 ENTRY(stext)
 ENTRY(_stext)
-ENTRY(startup_32)
 	/* Setup up the stack pointer */
 	LDIMM	(r0, spi_stack_top)
 	LDIMM	(r1, spu_stack_top)
diff --git a/arch/m32r/kernel/irq.c b/arch/m32r/kernel/irq.c
index d0c5b0b7da2f..2aeae4670098 100644
--- a/arch/m32r/kernel/irq.c
+++ b/arch/m32r/kernel/irq.c
@@ -22,9 +22,6 @@
 #include <linux/module.h>
 #include <asm/uaccess.h>
 
-atomic_t irq_err_count;
-atomic_t irq_mis_count;
-
 /*
  * Generic, controller-independent functions:
  */
@@ -63,9 +60,6 @@ int show_interrupts(struct seq_file *p, void *v)
 		seq_putc(p, '\n');
 skip:
 		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-	} else if (i == NR_IRQS) {
-		seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
-		seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count));
 	}
 	return 0;
 }
diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c
index a689e2978b6e..5be4faaf5b1c 100644
--- a/arch/m32r/kernel/process.c
+++ b/arch/m32r/kernel/process.c
@@ -35,8 +35,6 @@
 
 #include <linux/err.h>
 
-static int hlt_counter=0;
-
 /*
  * Return saved PC of a blocked thread.
  */
@@ -48,31 +46,16 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 /*
  * Powermanagement idle function, if any..
  */
-void (*pm_idle)(void) = NULL;
-EXPORT_SYMBOL(pm_idle);
+static void (*pm_idle)(void) = NULL;
 
 void (*pm_power_off)(void) = NULL;
 EXPORT_SYMBOL(pm_power_off);
 
-void disable_hlt(void)
-{
-	hlt_counter++;
-}
-
-EXPORT_SYMBOL(disable_hlt);
-
-void enable_hlt(void)
-{
-	hlt_counter--;
-}
-
-EXPORT_SYMBOL(enable_hlt);
-
 /*
  * We use this is we don't have any better
  * idle routine..
  */
-void default_idle(void)
+static void default_idle(void)
 {
 	/* M32R_FIXME: Please use "cpu_sleep" mode.  */
 	cpu_relax();
@@ -260,15 +243,6 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long spu,
 	return 0;
 }
 
-/*
- * Capture the user space registers if the task is not running (in user space)
- */
-int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs)
-{
-	/* M32R_FIXME */
-	return 1;
-}
-
 asmlinkage int sys_fork(unsigned long r0, unsigned long r1, unsigned long r2,
 	unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6,
 	struct pt_regs regs)
diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c
index 7577f971ea4e..929e5c9d3ad9 100644
--- a/arch/m32r/kernel/smp.c
+++ b/arch/m32r/kernel/smp.c
@@ -84,7 +84,7 @@ void smp_send_timer(void);
 void smp_ipi_timer_interrupt(struct pt_regs *);
 void smp_local_timer_interrupt(void);
 
-void send_IPI_allbutself(int, int);
+static void send_IPI_allbutself(int, int);
 static void send_IPI_mask(cpumask_t, int, int);
 unsigned long send_IPI_mask_phys(cpumask_t, int, int);
 
@@ -722,7 +722,7 @@ void smp_local_timer_interrupt(void)
  * ---------- --- --------------------------------------------------------
  *
  *==========================================================================*/
-void send_IPI_allbutself(int ipi_num, int try)
+static void send_IPI_allbutself(int ipi_num, int try)
 {
 	cpumask_t cpumask;
 
diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
index 994cc1556355..6ea017727cce 100644
--- a/arch/m32r/kernel/time.c
+++ b/arch/m32r/kernel/time.c
@@ -34,7 +34,6 @@
 #include <asm/hw_irq.h>
 
 #ifdef CONFIG_SMP
-extern void send_IPI_allbutself(int, int);
 extern void smp_local_timer_interrupt(void);
 #endif
 
@@ -188,7 +187,7 @@ static long last_rtc_update = 0;
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
  */
-irqreturn_t timer_interrupt(int irq, void *dev_id)
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 #ifndef CONFIG_SMP
 	profile_tick(CPU_PROFILING);
@@ -228,7 +227,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-struct irqaction irq0 = {
+static struct irqaction irq0 = {
 	.handler = timer_interrupt,
 	.flags = IRQF_DISABLED,
 	.mask = CPU_MASK_NONE,
diff --git a/arch/m32r/kernel/traps.c b/arch/m32r/kernel/traps.c
index 46159a4e644b..03b14e55cd89 100644
--- a/arch/m32r/kernel/traps.c
+++ b/arch/m32r/kernel/traps.c
@@ -61,7 +61,7 @@ extern unsigned long	eit_vector[];
 	((unsigned long)func - (unsigned long)eit_vector - entry*4)/4 \
 	+ 0xff000000UL
 
-void	set_eit_vector_entries(void)
+static void set_eit_vector_entries(void)
 {
 	extern void default_eit_handler(void);
 	extern void system_call(void);
@@ -121,9 +121,9 @@ void __init trap_init(void)
 	cpu_init();
 }
 
-int kstack_depth_to_print = 24;
+static int kstack_depth_to_print = 24;
 
-void show_trace(struct task_struct *task, unsigned long *stack)
+static void show_trace(struct task_struct *task, unsigned long *stack)
 {
 	unsigned long addr;
 
@@ -224,7 +224,7 @@ bad:
 	printk("\n");
 }
 
-DEFINE_SPINLOCK(die_lock);
+static DEFINE_SPINLOCK(die_lock);
 
 void die(const char * str, struct pt_regs * regs, long err)
 {
-- 
cgit v1.2.3


From 19506fc51852e859bb08ab5abbdb8fd02b7392f2 Mon Sep 17 00:00:00 2001
From: Bruno Randolf <br1@einfach.org>
Date: Thu, 25 Sep 2008 16:45:10 +0200
Subject: [MIPS] au1000: Make sure GPIO value is zero or one

David Brownell <david-b@pacbell.net> wrote:
>       The problem is that "value" is zero-or-nonzero.
>       This code wrongly assumes it's zero-or-one.
>       Possible fix:  "((!!value) << gpio)".

Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/au1000/common/gpio.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c
index 1f058434b726..e660ddd611c4 100644
--- a/arch/mips/au1000/common/gpio.c
+++ b/arch/mips/au1000/common/gpio.c
@@ -48,7 +48,7 @@ static void au1xxx_gpio2_write(unsigned gpio, int value)
 {
 	gpio -= AU1XXX_GPIO_BASE;
 
-	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio);
+	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio);
 }
 
 static int au1xxx_gpio2_direction_input(unsigned gpio)
@@ -62,7 +62,7 @@ static int au1xxx_gpio2_direction_output(unsigned gpio, int value)
 {
 	gpio -= AU1XXX_GPIO_BASE;
 	gpio2->dir |= 0x01 << gpio;
-	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio);
+	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio);
 	return 0;
 }
 
-- 
cgit v1.2.3


From f4d15f1c877644a604f8c8c3d094c13f9f8bdcf2 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Sat, 27 Sep 2008 15:05:06 +0100
Subject: [MIPS] IP27: Switch to dynamic interrupt routing avoding panic on
 error.

pcibios_map_irq is no way of returning an error but on IP27 an interrupt
is possibly not routable when running out of resources.  So do the
interrupt routing at pcibios_enable_device time.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/pci/pci-ip27.c | 40 +++++++++++++++++++++++++++++++---------
 1 file changed, 31 insertions(+), 9 deletions(-)

diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index bd78368c82bf..f97ab1461012 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -142,26 +142,48 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid)
  * on any one of the hubs connected to its xbow.
  */
 int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return 0;
+}
+
+/* Most MIPS systems have straight-forward swizzling needs.  */
+static inline u8 bridge_swizzle(u8 pin, u8 slot)
+{
+	return (((pin - 1) + slot) % 4) + 1;
+}
+
+static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev)
+{
+	while (dev->bus->parent) {
+		/* Move up the chain of bridges. */
+		dev = dev->bus->self;
+	}
+
+	return dev;
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
 {
 	struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
-	int irq = bc->pci_int[slot];
+	struct pci_dev *rdev = bridge_root_dev(dev);
+	int slot = PCI_SLOT(rdev->devfn);
+	int irq;
 
+	irq = bc->pci_int[slot];
 	if (irq == -1) {
-		irq = bc->pci_int[slot] = request_bridge_irq(bc);
+		irq = request_bridge_irq(bc);
 		if (irq < 0)
-			panic("Can't allocate interrupt for PCI device %s\n",
-			      pci_name(dev));
+			return irq;
+
+		bc->pci_int[slot] = irq;
 	}
 
 	irq_to_bridge[irq] = bc;
 	irq_to_slot[irq] = slot;
 
-	return irq;
-}
+	dev->irq = irq;
 
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
 	return 0;
 }
 
-- 
cgit v1.2.3


From 2dc42b47a7886bdc87514990c68ecdf8de61e653 Mon Sep 17 00:00:00 2001
From: Aurelien Jarno <aurelien@aurel32.net>
Date: Sat, 27 Sep 2008 16:06:16 +0200
Subject: [MIPS] BCM47xx: Fix build error due to missing PCI functions

This patch defines pcibios_map_irq() and pcibios_plat_dev_init() for
the BCM47xx platform.

It fixes the regression introduced by commit
aab547ce0d1493d400b6468c521a0137cd8c1edf.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/pci/Makefile      |  1 +
 arch/mips/pci/pci-bcm47xx.c | 60 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 61 insertions(+)
 create mode 100644 arch/mips/pci/pci-bcm47xx.c

diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 15e01aec37fd..c8c32f417b6c 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_SOC_TX3927)	+= ops-tx3927.o
 obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o pci-vr41xx.o
 obj-$(CONFIG_MARKEINS)		+= ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
 obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o
+obj-$(CONFIG_BCM47XX)		+= pci-bcm47xx.o
 
 #
 # These are still pretty much in the old state, watch, go blind.
diff --git a/arch/mips/pci/pci-bcm47xx.c b/arch/mips/pci/pci-bcm47xx.c
new file mode 100644
index 000000000000..bea9b6cdfdbf
--- /dev/null
+++ b/arch/mips/pci/pci-bcm47xx.c
@@ -0,0 +1,60 @@
+/*
+ *  Copyright (C) 2008 Aurelien Jarno <aurelien@aurel32.net>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/ssb/ssb.h>
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return 0;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	int res;
+	u8 slot, pin;
+
+	res = ssb_pcibios_plat_dev_init(dev);
+	if (res < 0) {
+		printk(KERN_ALERT "PCI: Failed to init device %s\n",
+		       pci_name(dev));
+		return res;
+	}
+
+	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+	slot = PCI_SLOT(dev->devfn);
+	res = ssb_pcibios_map_irq(dev, slot, pin);
+
+	/* IRQ-0 and IRQ-1 are software interrupts. */
+	if (res < 2) {
+		printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n",
+		       pci_name(dev));
+		return res;
+	}
+
+	dev->irq = res;
+	return 0;
+}
+
-- 
cgit v1.2.3


From ac82da3381fc663dbda31612a0bff60bc41676a3 Mon Sep 17 00:00:00 2001
From: Aurelien Jarno <aurelien@aurel32.net>
Date: Fri, 26 Sep 2008 22:27:11 +0200
Subject: [SSB] Initialise dma_mask for SSB_BUSTYPE_SSB devices

For SSB_BUSTYPE_SSB type devices, we need to initialize dma_mask using
coherent_dma_mask so that calls to dma_set_mask() succeed.

It fixes the regression on the b44 driver introduced by commit
f225763a7d6c92c4932dbd528437997078496fcc

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 drivers/ssb/main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index 87ab2443e66d..0ffabf5c0b60 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -471,6 +471,7 @@ static int ssb_devices_register(struct ssb_bus *bus)
 #endif
 			break;
 		case SSB_BUSTYPE_SSB:
+			dev->dma_mask = &dev->coherent_dma_mask;
 			break;
 		}
 
-- 
cgit v1.2.3


From 3d977760b9478538821a75dd5eb74d0f2a2b01e3 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Sat, 27 Sep 2008 19:32:16 +0200
Subject: Swarm: Fix crash due to missing initialization

If things are just right this will result in the hws[0]->parent being
passed to ide_host_add() being non-zero and an ooops a little later.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/mips/swarm.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c
index badf79fc9e3a..39c9ee995857 100644
--- a/drivers/ide/mips/swarm.c
+++ b/drivers/ide/mips/swarm.c
@@ -107,6 +107,7 @@ static int __devinit swarm_ide_probe(struct device *dev)
 
 	base = ioremap(offset, size);
 
+	memset(&hw, 0, sizeof(hw));
 	for (i = 0; i <= 7; i++)
 		hw.io_ports_array[i] =
 				(unsigned long)(base + ((0x1f0 + i) << 5));
-- 
cgit v1.2.3


From 801bd32e205ca6ef78dcaf80121f1eccb89b8c1e Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@googlemail.com>
Date: Sat, 27 Sep 2008 19:32:17 +0200
Subject: ide-tape: fix vendor strings

Remove superfluous two bytes from each string buffer and add proper length
format specifiers.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Tested-by: Mark de Wever <koraq@xs4all.nl>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-tape.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 1bce84b56630..3833189144ed 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -2338,7 +2338,7 @@ static void idetape_get_inquiry_results(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	struct ide_atapi_pc pc;
-	char fw_rev[6], vendor_id[10], product_id[18];
+	char fw_rev[4], vendor_id[8], product_id[16];
 
 	idetape_create_inquiry_cmd(&pc);
 	if (idetape_queue_pc_tail(drive, &pc)) {
@@ -2350,11 +2350,11 @@ static void idetape_get_inquiry_results(ide_drive_t *drive)
 	memcpy(product_id, &pc.buf[16], 16);
 	memcpy(fw_rev, &pc.buf[32], 4);
 
-	ide_fixstring(vendor_id, 10, 0);
-	ide_fixstring(product_id, 18, 0);
-	ide_fixstring(fw_rev, 6, 0);
+	ide_fixstring(vendor_id, 8, 0);
+	ide_fixstring(product_id, 16, 0);
+	ide_fixstring(fw_rev, 4, 0);
 
-	printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n",
+	printk(KERN_INFO "ide-tape: %s <-> %s: %.8s %.16s rev %.4s\n",
 			drive->name, tape->name, vendor_id, product_id, fw_rev);
 }
 
-- 
cgit v1.2.3


From 278ecfb8f4100c0edc2bc77695b591ea16388829 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sat, 27 Sep 2008 19:32:17 +0200
Subject: ide: note that IDE generic may prevent other drivers from attaching

Enabling IDE generic may prevent ATA controllers located on legacy
ports from being attached to more proper driver or can prevent other
controllers which share the IRQ from working.  Note it in the help
message.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: xerces8 <xerces8@butn.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: stein@hermes.si
[bart: s/will grab/may grab/ since Borislav has fixed PCI-case for .28]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/Kconfig | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index fc735ab08ff4..8e93a797c93d 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -292,6 +292,20 @@ config IDE_GENERIC
 	tristate "generic/default IDE chipset support"
 	depends on ALPHA || X86 || IA64 || M32R || MIPS
 	help
+	  This is the generic IDE driver.  This driver attaches to the
+	  fixed legacy ports (e.g. on PCs 0x1f0/0x170, 0x1e8/0x168 and
+	  so on).  Please note that if this driver is built into the
+	  kernel or loaded before other ATA (IDE or libata) drivers
+	  and the controller is located at legacy ports, this driver
+	  may grab those ports and thus can prevent the controller
+	  specific driver from attaching.
+
+	  Also, currently, IDE generic doesn't allow IRQ sharing
+	  meaning that the IRQs it grabs won't be available to other
+	  controllers sharing those IRQs which usually makes drivers
+	  for those controllers fail.  Generally, it's not a good idea
+	  to load IDE generic driver on modern systems.
+
 	  If unsure, say N.
 
 config BLK_DEV_PLATFORM
-- 
cgit v1.2.3


From d0eb40628e29c2bb3b5f8242b1d2f50b1a88d9da Mon Sep 17 00:00:00 2001
From: Márton Németh <nm127@freemail.hu>
Date: Sat, 27 Sep 2008 19:32:17 +0200
Subject: cdrom: update ioctl documentation
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Correct copy-paste problem: CDROMCLOSETRAY is about closing the tray,
not opening it.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 Documentation/ioctl/cdrom.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/ioctl/cdrom.txt b/Documentation/ioctl/cdrom.txt
index 62d4af44ec4a..59df81c8da2b 100644
--- a/Documentation/ioctl/cdrom.txt
+++ b/Documentation/ioctl/cdrom.txt
@@ -271,14 +271,14 @@ CDROMCLOSETRAY			pendant of CDROMEJECT
 
 	usage:
 
-	  ioctl(fd, CDROMEJECT, 0);
+	  ioctl(fd, CDROMCLOSETRAY, 0);
 
 	inputs:		none
 
 	outputs:	none
 
 	error returns:
-	  ENOSYS	cd drive not capable of ejecting
+	  ENOSYS	cd drive not capable of closing the tray
 	  EBUSY		other processes are accessing drive, or door is locked
 
 	notes:
-- 
cgit v1.2.3


From c9eeb248f3b44939532a9716bc06413383aa5d63 Mon Sep 17 00:00:00 2001
From: Boaz Harrosh <bharrosh@panasas.com>
Date: Wed, 24 Sep 2008 12:00:22 +0300
Subject: [SCSI] qlogicpti: fix sg list traversal error in continuation entries

The current sg list traversal logic for the continuation entries
doesn't advance the list pointer once all seven slots are used, so the
next continuation entry (if there is one) wrongly begins again at the
start of the sg list.

Fix by advancing the sg pointer after the for_each_sg().

Reported-by: Meelis Roos <mroos@ut.ee>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qlogicpti.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index 4a1cf6377f6c..905350896725 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -914,6 +914,7 @@ static inline int load_cmd(struct scsi_cmnd *Cmnd, struct Command_Entry *cmd,
 				ds[i].d_count = sg_dma_len(s);
 			}
 			sg_count -= n;
+			sg = s;
 		}
 	} else {
 		cmd->dataseg[0].d_base = 0;
-- 
cgit v1.2.3


From 4c1eb90a0908c0c60db2169dce08fb672e7582f1 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sun, 28 Sep 2008 07:39:01 +0900
Subject: sata_nv: reinstate nv_hardreset() for non generic controllers

Commit 2fd673ecf0378ddeeeb87b3605e50212e0c0ddc6 which tried to remove
hardreset for generic accidentally removed it for all flavors as all
others were inheriting from nv_generic_ops.  This patch reinstates
nv_hardreset() and puts it into nv_common_ops which all flavors
inherit from.  nv_generic_ops now inherits from nv_common_ops and
overrides .hardreset to ATA_OP_NULL.

While at it, explain why nv_hardreset and ATA_OP_NULL override are
necessary.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_nv.c | 46 ++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 40 insertions(+), 6 deletions(-)

diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 1e1f3f3757ae..14601dc05e41 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -309,6 +309,8 @@ static void nv_nf2_freeze(struct ata_port *ap);
 static void nv_nf2_thaw(struct ata_port *ap);
 static void nv_ck804_freeze(struct ata_port *ap);
 static void nv_ck804_thaw(struct ata_port *ap);
+static int nv_hardreset(struct ata_link *link, unsigned int *class,
+			unsigned long deadline);
 static int nv_adma_slave_config(struct scsi_device *sdev);
 static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
 static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
@@ -403,28 +405,45 @@ static struct scsi_host_template nv_swncq_sht = {
 	.slave_configure	= nv_swncq_slave_config,
 };
 
-static struct ata_port_operations nv_generic_ops = {
+/* OSDL bz3352 reports that some nv controllers can't determine device
+ * signature reliably and nv_hardreset is implemented to work around
+ * the problem.  This was reported on nf3 and it's unclear whether any
+ * other controllers are affected.  However, the workaround has been
+ * applied to all variants and there isn't much to gain by trying to
+ * find out exactly which ones are affected at this point especially
+ * because NV has moved over to ahci for newer controllers.
+ */
+static struct ata_port_operations nv_common_ops = {
 	.inherits		= &ata_bmdma_port_ops,
-	.hardreset		= ATA_OP_NULL,
+	.hardreset		= nv_hardreset,
 	.scr_read		= nv_scr_read,
 	.scr_write		= nv_scr_write,
 };
 
+/* OSDL bz11195 reports that link doesn't come online after hardreset
+ * on generic nv's and there have been several other similar reports
+ * on linux-ide.  Disable hardreset for generic nv's.
+ */
+static struct ata_port_operations nv_generic_ops = {
+	.inherits		= &nv_common_ops,
+	.hardreset		= ATA_OP_NULL,
+};
+
 static struct ata_port_operations nv_nf2_ops = {
-	.inherits		= &nv_generic_ops,
+	.inherits		= &nv_common_ops,
 	.freeze			= nv_nf2_freeze,
 	.thaw			= nv_nf2_thaw,
 };
 
 static struct ata_port_operations nv_ck804_ops = {
-	.inherits		= &nv_generic_ops,
+	.inherits		= &nv_common_ops,
 	.freeze			= nv_ck804_freeze,
 	.thaw			= nv_ck804_thaw,
 	.host_stop		= nv_ck804_host_stop,
 };
 
 static struct ata_port_operations nv_adma_ops = {
-	.inherits		= &nv_generic_ops,
+	.inherits		= &nv_common_ops,
 
 	.check_atapi_dma	= nv_adma_check_atapi_dma,
 	.sff_tf_read		= nv_adma_tf_read,
@@ -448,7 +467,7 @@ static struct ata_port_operations nv_adma_ops = {
 };
 
 static struct ata_port_operations nv_swncq_ops = {
-	.inherits		= &nv_generic_ops,
+	.inherits		= &nv_common_ops,
 
 	.qc_defer		= ata_std_qc_defer,
 	.qc_prep		= nv_swncq_qc_prep,
@@ -1586,6 +1605,21 @@ static void nv_mcp55_thaw(struct ata_port *ap)
 	ata_sff_thaw(ap);
 }
 
+static int nv_hardreset(struct ata_link *link, unsigned int *class,
+			unsigned long deadline)
+{
+	int rc;
+
+	/* SATA hardreset fails to retrieve proper device signature on
+	 * some controllers.  Request follow up SRST.  For more info,
+	 * see http://bugzilla.kernel.org/show_bug.cgi?id=3352
+	 */
+	rc = sata_sff_hardreset(link, class, deadline);
+	if (rc)
+		return rc;
+	return -EAGAIN;
+}
+
 static void nv_adma_error_handler(struct ata_port *ap)
 {
 	struct nv_adma_port_priv *pp = ap->private_data;
-- 
cgit v1.2.3


From 7e6cfb54b1ff4b64d74aa8cd191204c9598c073d Mon Sep 17 00:00:00 2001
From: Boaz Harrosh <bharrosh@panasas.com>
Date: Mon, 29 Sep 2008 09:38:55 +0200
Subject: scsi: fix fall out of sg-chaining patch in qlogicpti

Boaz writes:

"I've reviewed all patches since Matthew's, and I find one small
problem.

In the load_cmd() there is a compound loop where the first 4 sg's are
set then the rest are set into a memory structure in group of 7 sg's.

Well the second 7-group and on is a bug because sg pointer does not advance.
This is a fall out from Jens's patch."

The reporter, Meelis Roos <mroos@ut.ee>, verified that this patch
does indeed fix his problem with qlogicpti.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 drivers/scsi/qlogicpti.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index 4a1cf6377f6c..905350896725 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -914,6 +914,7 @@ static inline int load_cmd(struct scsi_cmnd *Cmnd, struct Command_Entry *cmd,
 				ds[i].d_count = sg_dma_len(s);
 			}
 			sg_count -= n;
+			sg = s;
 		}
 	} else {
 		cmd->dataseg[0].d_base = 0;
-- 
cgit v1.2.3


From ec2cd95f340fb07b905839ee219b3846ecf58396 Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Tue, 29 Jul 2008 16:35:52 -0500
Subject: ALSA: make the CS4270 driver a new-style I2C driver

Update the CS4270 ALSA device driver to use the new-style I2C interface.
Starting with the 2.6.27 PowerPC kernel, I2C devices that have entries in the
device trees can no longer be probed by old-style I2C drivers.  The device
tree for Freescale MPC8610 HPCD has included an entry for the CS4270 since
2.6.25, but that entry was previously ignored by the PowerPC I2C subsystem.
Since that's no longer the case, the best solution is to update the CS4270
driver to a new-style interface, rather than try to revert the behavior of
new PowerPC I2C subsystem.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/soc/codecs/cs4270.c | 71 ++++++++++-------------------------------------
 1 file changed, 15 insertions(+), 56 deletions(-)

diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index 9deb8c74fdfd..82d94f00aa45 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -490,34 +490,7 @@ static int cs4270_mute(struct snd_soc_dai *dai, int mute)
 
 #endif
 
-static int cs4270_i2c_probe(struct i2c_adapter *adap, int addr, int kind);
-
-/*
- * Notify the driver that a new I2C bus has been found.
- *
- * This function is called for each I2C bus in the system.  The function
- * then asks the I2C subsystem to probe that bus at the addresses on which
- * our device (the CS4270) could exist.  If a device is found at one of
- * those addresses, then our probe function (cs4270_i2c_probe) is called.
- */
-static int cs4270_i2c_attach(struct i2c_adapter *adapter)
-{
-	return i2c_probe(adapter, &addr_data, cs4270_i2c_probe);
-}
-
-static int cs4270_i2c_detach(struct i2c_client *client)
-{
-	struct snd_soc_codec *codec = i2c_get_clientdata(client);
-
-	i2c_detach_client(client);
-	codec->control_data = NULL;
-
-	kfree(codec->reg_cache);
-	codec->reg_cache = NULL;
-
-	kfree(client);
-	return 0;
-}
+static int cs4270_i2c_probe(struct i2c_client *, const struct i2c_device_id *);
 
 /* A list of non-DAPM controls that the CS4270 supports */
 static const struct snd_kcontrol_new cs4270_snd_controls[] = {
@@ -525,14 +498,19 @@ static const struct snd_kcontrol_new cs4270_snd_controls[] = {
 		CS4270_VOLA, CS4270_VOLB, 0, 0xFF, 1)
 };
 
+static const struct i2c_device_id cs4270_id[] = {
+	{"cs4270", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, cs4270_id);
+
 static struct i2c_driver cs4270_i2c_driver = {
 	.driver = {
 		.name = "CS4270 I2C",
 		.owner = THIS_MODULE,
 	},
-	.id =             I2C_DRIVERID_CS4270,
-	.attach_adapter = cs4270_i2c_attach,
-	.detach_client =  cs4270_i2c_detach,
+	.id_table = cs4270_id,
+	.probe = cs4270_i2c_probe,
 };
 
 /*
@@ -561,11 +539,11 @@ static struct snd_soc_device *cs4270_socdev;
  * Note: snd_soc_new_pcms() must be called before this function can be called,
  * because of snd_ctl_add().
  */
-static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind)
+static int cs4270_i2c_probe(struct i2c_client *i2c_client,
+	const struct i2c_device_id *id)
 {
 	struct snd_soc_device *socdev = cs4270_socdev;
 	struct snd_soc_codec *codec = socdev->codec;
-	struct i2c_client *i2c_client = NULL;
 	int i;
 	int ret = 0;
 
@@ -578,12 +556,6 @@ static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind)
 
 	/* Note: codec_dai->codec is NULL here */
 
-	i2c_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (!i2c_client) {
-		printk(KERN_ERR "cs4270: could not allocate I2C client\n");
-		return -ENOMEM;
-	}
-
 	codec->reg_cache = kzalloc(CS4270_NUMREGS, GFP_KERNEL);
 	if (!codec->reg_cache) {
 		printk(KERN_ERR "cs4270: could not allocate register cache\n");
@@ -591,13 +563,6 @@ static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind)
 		goto error;
 	}
 
-	i2c_set_clientdata(i2c_client, codec);
-	strcpy(i2c_client->name, "CS4270");
-
-	i2c_client->driver = &cs4270_i2c_driver;
-	i2c_client->adapter = adapter;
-	i2c_client->addr = addr;
-
 	/* Verify that we have a CS4270 */
 
 	ret = i2c_smbus_read_byte_data(i2c_client, CS4270_CHIPID);
@@ -612,18 +577,10 @@ static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind)
 		goto error;
 	}
 
-	printk(KERN_INFO "cs4270: found device at I2C address %X\n", addr);
+	printk(KERN_INFO "cs4270: found device at I2C address %X\n",
+		i2c_client->addr);
 	printk(KERN_INFO "cs4270: hardware revision %X\n", ret & 0xF);
 
-	/* Tell the I2C layer a new client has arrived */
-
-	ret = i2c_attach_client(i2c_client);
-	if (ret) {
-		printk(KERN_ERR "cs4270: could not attach codec, "
-			"I2C address %x, error code %i\n", addr, ret);
-		goto error;
-	}
-
 	codec->control_data = i2c_client;
 	codec->read = cs4270_read_reg_cache;
 	codec->write = cs4270_i2c_write;
@@ -648,6 +605,8 @@ static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind)
 			goto error;
 	}
 
+	i2c_set_clientdata(i2c_client, codec);
+
 	return 0;
 
 error:
-- 
cgit v1.2.3


From 9778e9a0eafe796c2affcd1fa1fa8a3765e026e6 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Sat, 27 Sep 2008 20:30:52 +0200
Subject: ALSA: ASoC: Fix another cs4270 error path

Conversion to new-style i2c driver missed the error path of the
probe function. Fix it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Timur Tabi <timur@freescale.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/soc/codecs/cs4270.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index 82d94f00aa45..d68650de39bc 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -610,17 +610,12 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client,
 	return 0;
 
 error:
-	if (codec->control_data) {
-		i2c_detach_client(i2c_client);
-		codec->control_data = NULL;
-	}
+	codec->control_data = NULL;
 
 	kfree(codec->reg_cache);
 	codec->reg_cache = NULL;
 	codec->reg_cache_size = 0;
 
-	kfree(i2c_client);
-
 	return ret;
 }
 
-- 
cgit v1.2.3


From ff41efcff635717ebe032437c4d6ee22badc9960 Mon Sep 17 00:00:00 2001
From: Douglas Schilling Landgraf <dougsland@linuxtv.org>
Date: Thu, 4 Sep 2008 11:19:27 -0300
Subject: V4L/DVB (8883): w9968cf: Fix order of usb_alloc_urb validation

Fixed order of usb_alloc_urb pointer validation.

Cc: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/w9968cf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c
index 168baabe4659..11edf79f57be 100644
--- a/drivers/media/video/w9968cf.c
+++ b/drivers/media/video/w9968cf.c
@@ -911,7 +911,6 @@ static int w9968cf_start_transfer(struct w9968cf_device* cam)
 
 	for (i = 0; i < W9968CF_URBS; i++) {
 		urb = usb_alloc_urb(W9968CF_ISO_PACKETS, GFP_KERNEL);
-		cam->urb[i] = urb;
 		if (!urb) {
 			for (j = 0; j < i; j++)
 				usb_free_urb(cam->urb[j]);
@@ -919,6 +918,7 @@ static int w9968cf_start_transfer(struct w9968cf_device* cam)
 			return -ENOMEM;
 		}
 
+		cam->urb[i] = urb;
 		urb->dev = udev;
 		urb->context = (void*)cam;
 		urb->pipe = usb_rcvisocpipe(udev, 1);
-- 
cgit v1.2.3


From ff9b3e430b04e00dd2d29a26ae9438d7044a51db Mon Sep 17 00:00:00 2001
From: Douglas Schilling Landgraf <dougsland@linuxtv.org>
Date: Thu, 4 Sep 2008 11:20:20 -0300
Subject: V4L/DVB (8884): em28xx-audio: fix memory leak

Free allocated memory

Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/em28xx-audio.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c
index 3c006103c1eb..08cb4e7711a5 100644
--- a/drivers/media/video/em28xx/em28xx-audio.c
+++ b/drivers/media/video/em28xx/em28xx-audio.c
@@ -161,8 +161,14 @@ static int em28xx_init_audio_isoc(struct em28xx *dev)
 
 		memset(dev->adev->transfer_buffer[i], 0x80, sb_size);
 		urb = usb_alloc_urb(EM28XX_NUM_AUDIO_PACKETS, GFP_ATOMIC);
-		if (!urb)
+		if (!urb) {
+			em28xx_errdev("usb_alloc_urb failed!\n");
+			for (j = 0; j < i; j++) {
+				usb_free_urb(dev->adev->urb[j]);
+				kfree(dev->adev->transfer_buffer[j]);
+			}
 			return -ENOMEM;
+		}
 
 		urb->dev = dev->udev;
 		urb->context = dev;
-- 
cgit v1.2.3


From beeb82becc5cdd88766b4ec21f13952e2af03324 Mon Sep 17 00:00:00 2001
From: Douglas Schilling Landgraf <dougsland@linuxtv.org>
Date: Thu, 4 Sep 2008 11:21:03 -0300
Subject: V4L/DVB (8885): cpia2_usb: fix memory leak

Free allocated memory

Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cpia2/cpia2_usb.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/media/video/cpia2/cpia2_usb.c b/drivers/media/video/cpia2/cpia2_usb.c
index a4574740350d..a8a199047cbd 100644
--- a/drivers/media/video/cpia2/cpia2_usb.c
+++ b/drivers/media/video/cpia2/cpia2_usb.c
@@ -632,7 +632,7 @@ int cpia2_usb_transfer_cmd(struct camera_data *cam,
 static int submit_urbs(struct camera_data *cam)
 {
 	struct urb *urb;
-	int fx, err, i;
+	int fx, err, i, j;
 
 	for(i=0; i<NUM_SBUF; ++i) {
 		if (cam->sbuf[i].data)
@@ -657,6 +657,9 @@ static int submit_urbs(struct camera_data *cam)
 		}
 		urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
 		if (!urb) {
+			ERR("%s: usb_alloc_urb error!\n", __func__);
+			for (j = 0; j < i; j++)
+				usb_free_urb(cam->sbuf[j].urb);
 			return -ENOMEM;
 		}
 
-- 
cgit v1.2.3


From dc2b80c191a67de8191f6323d532132fb257e402 Mon Sep 17 00:00:00 2001
From: Douglas Schilling Landgraf <dougsland@linuxtv.org>
Date: Thu, 4 Sep 2008 11:21:58 -0300
Subject: V4L/DVB (8886): ov511: fix memory leak

Free allocated memory

Cc: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/ov511.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
index 3d3c48db45d9..2576ded2b9c5 100644
--- a/drivers/media/video/ov511.c
+++ b/drivers/media/video/ov511.c
@@ -3591,7 +3591,7 @@ static int
 ov51x_init_isoc(struct usb_ov511 *ov)
 {
 	struct urb *urb;
-	int fx, err, n, size;
+	int fx, err, n, i, size;
 
 	PDEBUG(3, "*** Initializing capture ***");
 
@@ -3662,6 +3662,8 @@ ov51x_init_isoc(struct usb_ov511 *ov)
 		urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
 		if (!urb) {
 			err("init isoc: usb_alloc_urb ret. NULL");
+			for (i = 0; i < n; i++)
+				usb_free_urb(ov->sbuf[i].urb);
 			return -ENOMEM;
 		}
 		ov->sbuf[n].urb = urb;
-- 
cgit v1.2.3


From adf8c021d527b9c0247070513a8fa8cfd50668ed Mon Sep 17 00:00:00 2001
From: Douglas Schilling Landgraf <dougsland@linuxtv.org>
Date: Thu, 4 Sep 2008 11:23:06 -0300
Subject: V4L/DVB (8887): gspca: fix memory leak

Free allocated memory

Cc: Jean-Francois Moine <moinejf@free.fr>
Cc: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/gspca.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 7be69284da03..ed8935da58e0 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -459,6 +459,8 @@ static int create_urbs(struct gspca_dev *gspca_dev,
 		urb = usb_alloc_urb(npkt, GFP_KERNEL);
 		if (!urb) {
 			err("usb_alloc_urb failed");
+			for (i = 0; i < n; i++)
+				usb_free_urb(gspca_dev->urb[i]);
 			return -ENOMEM;
 		}
 		urb->transfer_buffer = usb_buffer_alloc(gspca_dev->dev,
-- 
cgit v1.2.3


From b675c0526e3d07742cbd62a22256a731ea6d5176 Mon Sep 17 00:00:00 2001
From: Mike Isely <isely@pobox.com>
Date: Sat, 30 Aug 2008 15:08:28 -0300
Subject: V4L/DVB (8892): pvrusb2: Handle USB ID 2040:2950 same as 2040:2900

The device 2040:2950 is a really old variant of the PVR USB2 hardware.
I have just learned of its existence.  For the purposes of the pvrusb2
driver, it is functionally identical to the well known 29xxx series
(2040:2900).  Amazing that this went undetected for 3+ years.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/pvrusb2/pvrusb2-devattr.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
index 88e175168438..cbe2a3417851 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
@@ -489,6 +489,8 @@ static const struct pvr2_device_desc pvr2_device_751xx = {
 struct usb_device_id pvr2_device_table[] = {
 	{ USB_DEVICE(0x2040, 0x2900),
 	  .driver_info = (kernel_ulong_t)&pvr2_device_29xxx},
+	{ USB_DEVICE(0x2040, 0x2950), /* Logically identical to 2900 */
+	  .driver_info = (kernel_ulong_t)&pvr2_device_29xxx},
 	{ USB_DEVICE(0x2040, 0x2400),
 	  .driver_info = (kernel_ulong_t)&pvr2_device_24xxx},
 	{ USB_DEVICE(0x1164, 0x0622),
-- 
cgit v1.2.3


From 135aedc38e812b922aa56096f36a3d72ffbcf2fb Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Tue, 2 Sep 2008 19:00:21 -0300
Subject: V4L/DVB (8904): cx88: add missing unlock_kernel

sparse found an unbalanced BKL usage.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx88/cx88-blackbird.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index 9a1374a38ec7..6b922066a660 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -1070,6 +1070,7 @@ static int mpeg_open(struct inode *inode, struct file *file)
 		err = drv->request_acquire(drv);
 		if(err != 0) {
 			dprintk(1,"%s: Unable to acquire hardware, %d\n", __func__, err);
+			unlock_kernel();
 			return err;
 		}
 	}
-- 
cgit v1.2.3


From 92762abc3dfb10c9cb41a12271b8c7513a4fce20 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Tue, 2 Sep 2008 19:02:32 -0300
Subject: V4L/DVB (8905): ov511: fix exposure sysfs attribute bug

Exposure was always 0. Thanks to sparse for finding this.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/ov511.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
index 2576ded2b9c5..c6852402c5e9 100644
--- a/drivers/media/video/ov511.c
+++ b/drivers/media/video/ov511.c
@@ -5653,7 +5653,7 @@ static ssize_t show_exposure(struct device *cd,
 	if (!ov->dev)
 		return -ENODEV;
 	sensor_get_exposure(ov, &exp);
-	return sprintf(buf, "%d\n", exp >> 8);
+	return sprintf(buf, "%d\n", exp);
 }
 static DEVICE_ATTR(exposure, S_IRUGO, show_exposure, NULL);
 
-- 
cgit v1.2.3


From 40f17a7981f1d8baf0ad13233e5e7632754d931a Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Thu, 4 Sep 2008 03:57:01 -0300
Subject: V4L/DVB (8909): gspca: PAC 7302 webcam 093a:262a added.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 Documentation/video4linux/gspca.txt | 1 +
 drivers/media/video/gspca/pac7311.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 0f03900c48fb..9a3e4d797fa8 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -190,6 +190,7 @@ pac7311		093a:260f	SnakeCam
 pac7311		093a:2621	PAC731x
 pac7311		093a:2624	PAC7302
 pac7311		093a:2626	Labtec 2200
+pac7311		093a:262a	Webcam 300k
 zc3xx		0ac8:0302	Z-star Vimicro zc0302
 vc032x		0ac8:0321	Vimicro generic vc0321
 vc032x		0ac8:0323	Vimicro Vc0323
diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index d4be51843286..ba865b7f1ed8 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -1063,6 +1063,7 @@ static __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x093a, 0x2621), .driver_info = SENSOR_PAC7302},
 	{USB_DEVICE(0x093a, 0x2624), .driver_info = SENSOR_PAC7302},
 	{USB_DEVICE(0x093a, 0x2626), .driver_info = SENSOR_PAC7302},
+	{USB_DEVICE(0x093a, 0x262a), .driver_info = SENSOR_PAC7302},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
-- 
cgit v1.2.3


From d0185c0882d76b8126d4a099c7ac82b3b216d103 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon, 29 Sep 2008 07:42:57 -0700
Subject: Fix NULL pointer dereference in proc_sys_compare

The VFS interface for the 'd_compare()' is a bit special (read: 'odd'),
because it really just essentially replaces a memcmp().  The filesystem
is supposed to just compare the two names with whatever case-independent
or other function.

And when I say 'is supposed to', I obviously mean that 'procfs does odd
things, and actually looks at the dentry that we don't even pass down,
rather than just the name'.  Which results in problems, because we
actually call d_compare before we have even verified that the dentry is
still hashed at all.

And that causes a problm since the inode that procfs looks at may have
been free'd and the d_inode pointer is NULL.  procfs just assumes that
all dentries are positive, since procfs itself never generates a
negative one.  But memory pressure will still result in the dentry
getting torn down, and as it is removed by RCU, it still remains visible
on some lists - and to d_compare.

If the filesystem just did a name comparison, we wouldn't care.  And we
could just fix procfs to know about negative dentries too.  But rather
than have the low-level filesystems know about internal VFS details,
just move the check for a unhashed dentry up a bit, so that we will only
call d_compare on dentries that are still active.

The actual oops this caused didn't look like a NULL pointer dereference
because procfs did a 'container_of(inode, struct proc_inode, vfs_inode)'
to get at its internal proc_inode information from the inode pointer,
and accessed a field below the inode. So the oops would look something
like

	BUG: unable to handle kernel paging request at fffffffffffffff0
	IP: [<ffffffff802bc6c6>] proc_sys_compare+0x36/0x50

and was seen on both x86-64 (Alexey Dobriyan and Hugh Dickins) and
ppc64 (Hugh Dickins).

Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/dcache.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/fs/dcache.c b/fs/dcache.c
index 80e93956aced..e7a1a99b7464 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1395,6 +1395,10 @@ struct dentry * __d_lookup(struct dentry * parent, struct qstr * name)
 		if (dentry->d_parent != parent)
 			goto next;
 
+		/* non-existing due to RCU? */
+		if (d_unhashed(dentry))
+			goto next;
+
 		/*
 		 * It is safe to compare names since d_move() cannot
 		 * change the qstr (protected by d_lock).
@@ -1410,10 +1414,8 @@ struct dentry * __d_lookup(struct dentry * parent, struct qstr * name)
 				goto next;
 		}
 
-		if (!d_unhashed(dentry)) {
-			atomic_inc(&dentry->d_count);
-			found = dentry;
-		}
+		atomic_inc(&dentry->d_count);
+		found = dentry;
 		spin_unlock(&dentry->d_lock);
 		break;
 next:
-- 
cgit v1.2.3


From 204c96f609045a8ce84d1dca3e758ee9b0b2a95c Mon Sep 17 00:00:00 2001
From: "zippel@linux-m68k.org" <zippel@linux-m68k.org>
Date: Mon, 29 Sep 2008 05:27:10 +0200
Subject: kconfig: fix silentoldconfig

Recent changes to oldconfig have mixed up the silentoldconfig handling,
so this fixes that by clearly separating that special mode, e.g.
KCONFIG_NOSILENTUPDATE is only relevant here, the .config is written as
needed.

This will also properly close Bug 11230.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/kconfig/conf.c | 123 +++++++++++++++++++++++--------------------------
 1 file changed, 57 insertions(+), 66 deletions(-)

diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c
index 36b5eedcdc75..3e1057f885c6 100644
--- a/scripts/kconfig/conf.c
+++ b/scripts/kconfig/conf.c
@@ -32,6 +32,7 @@ char *defconfig_file;
 
 static int indent = 1;
 static int valid_stdin = 1;
+static int sync_kconfig;
 static int conf_cnt;
 static char line[128];
 static struct menu *rootEntry;
@@ -65,7 +66,7 @@ static void strip(char *str)
 
 static void check_stdin(void)
 {
-	if (!valid_stdin && input_mode == ask_silent) {
+	if (!valid_stdin) {
 		printf(_("aborted!\n\n"));
 		printf(_("Console input/output is redirected. "));
 		printf(_("Run 'make oldconfig' to update configuration.\n\n"));
@@ -427,43 +428,6 @@ static void check_conf(struct menu *menu)
 		check_conf(child);
 }
 
-static void conf_do_update(void)
-{
-	/* Update until a loop caused no more changes */
-	do {
-		conf_cnt = 0;
-		check_conf(&rootmenu);
-	} while (conf_cnt);
-}
-
-static int conf_silent_update(void)
-{
-	const char *name;
-
-	if (conf_get_changed()) {
-		name = getenv("KCONFIG_NOSILENTUPDATE");
-		if (name && *name) {
-			fprintf(stderr,
-			_("\n*** Kernel configuration requires explicit update.\n\n"));
-			return 1;
-		}
-		conf_do_update();
-	}
-	return 0;
-}
-
-static int conf_update(void)
-{
-	rootEntry = &rootmenu;
-	conf(&rootmenu);
-	if (input_mode == ask_all) {
-		input_mode = ask_silent;
-		valid_stdin = 1;
-	}
-	conf_do_update();
-	return 0;
-}
-
 int main(int ac, char **av)
 {
 	int opt;
@@ -477,11 +441,11 @@ int main(int ac, char **av)
 	while ((opt = getopt(ac, av, "osdD:nmyrh")) != -1) {
 		switch (opt) {
 		case 'o':
-			input_mode = ask_new;
+			input_mode = ask_silent;
 			break;
 		case 's':
 			input_mode = ask_silent;
-			valid_stdin = isatty(0) && isatty(1) && isatty(2);
+			sync_kconfig = 1;
 			break;
 		case 'd':
 			input_mode = set_default;
@@ -519,6 +483,19 @@ int main(int ac, char **av)
 	name = av[optind];
 	conf_parse(name);
 	//zconfdump(stdout);
+	if (sync_kconfig) {
+		if (stat(".config", &tmpstat)) {
+			fprintf(stderr, _("***\n"
+				"*** You have not yet configured your kernel!\n"
+				"*** (missing kernel .config file)\n"
+				"***\n"
+				"*** Please run some configurator (e.g. \"make oldconfig\" or\n"
+				"*** \"make menuconfig\" or \"make xconfig\").\n"
+				"***\n"));
+			exit(1);
+		}
+	}
+
 	switch (input_mode) {
 	case set_default:
 		if (!defconfig_file)
@@ -531,16 +508,6 @@ int main(int ac, char **av)
 		}
 		break;
 	case ask_silent:
-		if (stat(".config", &tmpstat)) {
-			printf(_("***\n"
-				"*** You have not yet configured your kernel!\n"
-				"*** (missing kernel .config file)\n"
-				"***\n"
-				"*** Please run some configurator (e.g. \"make oldconfig\" or\n"
-				"*** \"make menuconfig\" or \"make xconfig\").\n"
-				"***\n"));
-			exit(1);
-		}
 	case ask_all:
 	case ask_new:
 		conf_read(NULL);
@@ -569,6 +536,19 @@ int main(int ac, char **av)
 	default:
 		break;
 	}
+
+	if (sync_kconfig) {
+		if (conf_get_changed()) {
+			name = getenv("KCONFIG_NOSILENTUPDATE");
+			if (name && *name) {
+				fprintf(stderr,
+					_("\n*** Kernel configuration requires explicit update.\n\n"));
+				return 1;
+			}
+		}
+		valid_stdin = isatty(0) && isatty(1) && isatty(2);
+	}
+
 	switch (input_mode) {
 	case set_no:
 		conf_set_all_new_symbols(def_no);
@@ -585,27 +565,38 @@ int main(int ac, char **av)
 	case set_default:
 		conf_set_all_new_symbols(def_default);
 		break;
-	case ask_silent:
 	case ask_new:
-		if (conf_silent_update())
-			exit(1);
-		break;
 	case ask_all:
-		if (conf_update())
-			exit(1);
+		rootEntry = &rootmenu;
+		conf(&rootmenu);
+		input_mode = ask_silent;
+		/* fall through */
+	case ask_silent:
+		/* Update until a loop caused no more changes */
+		do {
+			conf_cnt = 0;
+			check_conf(&rootmenu);
+		} while (conf_cnt);
 		break;
 	}
 
-	if (conf_write(NULL)) {
-		fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
-		exit(1);
-	}
-	/* ask_silent is used during the build so we shall update autoconf.
-	 * All other commands are only used to generate a config.
-	 */
-	if (input_mode == ask_silent && conf_write_autoconf()) {
-		fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
-		return 1;
+	if (sync_kconfig) {
+		/* silentoldconfig is used during the build so we shall update autoconf.
+		 * All other commands are only used to generate a config.
+		 */
+		if (conf_get_changed() && conf_write(NULL)) {
+			fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
+			exit(1);
+		}
+		if (conf_write_autoconf()) {
+			fprintf(stderr, _("\n*** Error during update of the kernel configuration.\n\n"));
+			return 1;
+		}
+	} else {
+		if (conf_write(NULL)) {
+			fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
+			exit(1);
+		}
 	}
 	return 0;
 }
-- 
cgit v1.2.3


From 661b0680f736e628a6da1cc030c201646587d658 Mon Sep 17 00:00:00 2001
From: "zippel@linux-m68k.org" <zippel@linux-m68k.org>
Date: Mon, 29 Sep 2008 05:27:11 +0200
Subject: kconfig: readd lost change count

Commit f072181e6403b0fe2e2aa800a005497b748fd284 ("kconfig: drop the
""trying to assign nonexistent symbol" warning") simply dropped the
warnings, but it does a little more than that, it also marks the current
.config as needed saving, so add this back.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/kconfig/confdata.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c
index df6a188b9930..b91cf241a539 100644
--- a/scripts/kconfig/confdata.c
+++ b/scripts/kconfig/confdata.c
@@ -222,8 +222,10 @@ load:
 				continue;
 			if (def == S_DEF_USER) {
 				sym = sym_find(line + 9);
-				if (!sym)
+				if (!sym) {
+					sym_add_change_count(1);
 					break;
+				}
 			} else {
 				sym = sym_lookup(line + 9, 0);
 				if (sym->type == S_UNKNOWN)
@@ -259,8 +261,10 @@ load:
 			}
 			if (def == S_DEF_USER) {
 				sym = sym_find(line + 7);
-				if (!sym)
+				if (!sym) {
+					sym_add_change_count(1);
 					break;
+				}
 			} else {
 				sym = sym_lookup(line + 7, 0);
 				if (sym->type == S_UNKNOWN)
-- 
cgit v1.2.3


From 7659e349672bb0d378ef8d7d62bae4c53d2bdd18 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Mon, 29 Sep 2008 14:06:45 +0200
Subject: hrtimer: migrate pending list on cpu offline

Impact: hrtimers which are on the pending list are not migrated at cpu
	offline and can be stale forever

Add the pending list migration when CONFIG_HIGH_RES_TIMERS is enabled

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 kernel/hrtimer.c | 34 +++++++++++++++++++++++++++++++++-
 1 file changed, 33 insertions(+), 1 deletion(-)

diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index b8e4dce80a74..580bc66ae136 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -1610,10 +1610,36 @@ static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
 	}
 }
 
+#ifdef CONFIG_HIGH_RES_TIMERS
+static int migrate_hrtimer_pending(struct hrtimer_cpu_base *old_base,
+				   struct hrtimer_cpu_base *new_base)
+{
+	struct hrtimer *timer;
+	int raise = 0;
+
+	while (!list_empty(&old_base->cb_pending)) {
+		timer = list_entry(old_base->cb_pending.next,
+				   struct hrtimer, cb_entry);
+
+		__remove_hrtimer(timer, timer->base, HRTIMER_STATE_PENDING, 0);
+		timer->base = &new_base->clock_base[timer->base->index];
+		list_add_tail(&timer->cb_entry, &new_base->cb_pending);
+		raise = 1;
+	}
+	return raise;
+}
+#else
+static int migrate_hrtimer_pending(struct hrtimer_cpu_base *old_base,
+				   struct hrtimer_cpu_base *new_base)
+{
+	return 0;
+}
+#endif
+
 static void migrate_hrtimers(int cpu)
 {
 	struct hrtimer_cpu_base *old_base, *new_base;
-	int i;
+	int i, raise = 0;
 
 	BUG_ON(cpu_online(cpu));
 	old_base = &per_cpu(hrtimer_bases, cpu);
@@ -1630,10 +1656,16 @@ static void migrate_hrtimers(int cpu)
 				     &new_base->clock_base[i]);
 	}
 
+	if (migrate_hrtimer_pending(old_base, new_base))
+		raise = 1;
+
 	spin_unlock(&old_base->lock);
 	spin_unlock(&new_base->lock);
 	local_irq_enable();
 	put_cpu_var(hrtimer_bases);
+
+	if (raise)
+		hrtimer_raise_softirq();
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
-- 
cgit v1.2.3


From 41e1022eae71707f1ce6801a746f70b1e57b7567 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Mon, 29 Sep 2008 14:09:39 +0200
Subject: hrtimer: fix migration of CB_IRQSAFE_NO_SOFTIRQ hrtimers

Impact: Stale timers after a CPU went offline.

commit 37bb6cb4097e29ffee970065b74499cbf10603a3
       hrtimer: unlock hrtimer_wakeup

changed the hrtimer sleeper callback mode to CB_IRQSAFE_NO_SOFTIRQ due
to locking problems. A result of this change is that when enqueue is
called for an already expired hrtimer the callback function is not
longer called directly from the enqueue code. The normal callers have
been fixed in the code, but the migration code which moves hrtimers
from a dead CPU to a live CPU was not made aware of this.

This can be fixed by checking the timer state after the call to
enqueue in the migration code.


Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 kernel/hrtimer.c | 28 +++++++++++++++++++++++++---
 1 file changed, 25 insertions(+), 3 deletions(-)

diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 580bc66ae136..ac2f6d6d4868 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -1591,11 +1591,12 @@ static void __cpuinit init_hrtimers_cpu(int cpu)
 
 #ifdef CONFIG_HOTPLUG_CPU
 
-static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
+static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
 				struct hrtimer_clock_base *new_base)
 {
 	struct hrtimer *timer;
 	struct rb_node *node;
+	int raise = 0;
 
 	while ((node = rb_first(&old_base->active))) {
 		timer = rb_entry(node, struct hrtimer, node);
@@ -1607,7 +1608,27 @@ static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
 		 * Enqueue the timer. Allow reprogramming of the event device
 		 */
 		enqueue_hrtimer(timer, new_base, 1);
+
+#ifdef CONFIG_HIGH_RES_TIMERS
+		/*
+		 * Happens with high res enabled when the timer was
+		 * already expired and the callback mode is
+		 * HRTIMER_CB_IRQSAFE_NO_SOFTIRQ
+		 * (hrtimer_sleeper). The enqueue code does not move
+		 * them to the soft irq pending list for
+		 * performance/latency reasons, but in the migration
+		 * state, we need to do that otherwise we end up with
+		 * a stale timer.
+		 */
+		if (timer->state == HRTIMER_STATE_INACTIVE) {
+			timer->state = HRTIMER_STATE_PENDING;
+			list_add_tail(&timer->cb_entry,
+				      &new_base->cpu_base->cb_pending);
+			raise = 1;
+		}
+#endif
 	}
+	return raise;
 }
 
 #ifdef CONFIG_HIGH_RES_TIMERS
@@ -1652,8 +1673,9 @@ static void migrate_hrtimers(int cpu)
 	spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING);
 
 	for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
-		migrate_hrtimer_list(&old_base->clock_base[i],
-				     &new_base->clock_base[i]);
+		if (migrate_hrtimer_list(&old_base->clock_base[i],
+					 &new_base->clock_base[i]))
+			raise = 1;
 	}
 
 	if (migrate_hrtimer_pending(old_base, new_base))
-- 
cgit v1.2.3


From b00c1a99e7758f794923c61e5cd55268d61c9469 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Mon, 29 Sep 2008 15:44:46 +0200
Subject: hrtimer: mark migration state

Impact: during migration active hrtimers can be seen as inactive

The migration code removes the hrtimers from the queues of the dead
CPU and sets the state temporary to INACTIVE. The enqueue code sets it
to ACTIVE/PENDING again.

Prevent that the wrong state can be seen by using a separate migration
state bit.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 include/linux/hrtimer.h |  4 +++-
 kernel/hrtimer.c        | 12 ++++++++++--
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 6d93dce61cbb..bdd88df1b4e5 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -67,9 +67,10 @@ enum hrtimer_cb_mode {
  * 0x02		callback function running
  * 0x04		callback pending (high resolution mode)
  *
- * Special case:
+ * Special cases:
  * 0x03		callback function running and enqueued
  *		(was requeued on another CPU)
+ * 0x09		timer was migrated on CPU hotunplug
  * The "callback function running and enqueued" status is only possible on
  * SMP. It happens for example when a posix timer expired and the callback
  * queued a signal. Between dropping the lock which protects the posix timer
@@ -87,6 +88,7 @@ enum hrtimer_cb_mode {
 #define HRTIMER_STATE_ENQUEUED	0x01
 #define HRTIMER_STATE_CALLBACK	0x02
 #define HRTIMER_STATE_PENDING	0x04
+#define HRTIMER_STATE_MIGRATE	0x08
 
 /**
  * struct hrtimer - the basic hrtimer structure
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index ac2f6d6d4868..ace723dd1e52 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -1602,7 +1602,13 @@ static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
 		timer = rb_entry(node, struct hrtimer, node);
 		BUG_ON(hrtimer_callback_running(timer));
 		debug_hrtimer_deactivate(timer);
-		__remove_hrtimer(timer, old_base, HRTIMER_STATE_INACTIVE, 0);
+
+		/*
+		 * Mark it as STATE_MIGRATE not INACTIVE otherwise the
+		 * timer could be seen as !active and just vanish away
+		 * under us on another CPU
+		 */
+		__remove_hrtimer(timer, old_base, HRTIMER_STATE_MIGRATE, 0);
 		timer->base = new_base;
 		/*
 		 * Enqueue the timer. Allow reprogramming of the event device
@@ -1620,13 +1626,15 @@ static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
 		 * state, we need to do that otherwise we end up with
 		 * a stale timer.
 		 */
-		if (timer->state == HRTIMER_STATE_INACTIVE) {
+		if (timer->state == HRTIMER_STATE_MIGRATE) {
 			timer->state = HRTIMER_STATE_PENDING;
 			list_add_tail(&timer->cb_entry,
 				      &new_base->cpu_base->cb_pending);
 			raise = 1;
 		}
 #endif
+		/* Clear the migration state bit */
+		timer->state &= ~HRTIMER_STATE_MIGRATE;
 	}
 	return raise;
 }
-- 
cgit v1.2.3


From ccc7dadf736639da86f3e0c86832c11a66fc8221 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Mon, 29 Sep 2008 15:47:42 +0200
Subject: hrtimer: prevent migration of per CPU hrtimers

Impact: per CPU hrtimers can be migrated from a dead CPU

The hrtimer code has no knowledge about per CPU timers, but we need to
prevent the migration of such timers and warn when such a timer is
active at migration time.

Explicitely mark the timers as per CPU and use a more understandable
mode descriptor for the interrupts safe unlocked callback mode, which
is used by hrtimer_sleeper and the scheduler code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 include/linux/hrtimer.h      | 14 +++++++++++---
 kernel/hrtimer.c             | 37 +++++++++++++++++++++++++------------
 kernel/sched.c               |  4 ++--
 kernel/time/tick-sched.c     |  2 +-
 kernel/trace/trace_sysprof.c |  2 +-
 5 files changed, 40 insertions(+), 19 deletions(-)

diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index bdd88df1b4e5..2f245fe63bda 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -47,14 +47,22 @@ enum hrtimer_restart {
  *	HRTIMER_CB_IRQSAFE:		Callback may run in hardirq context
  *	HRTIMER_CB_IRQSAFE_NO_RESTART:	Callback may run in hardirq context and
  *					does not restart the timer
- *	HRTIMER_CB_IRQSAFE_NO_SOFTIRQ:	Callback must run in hardirq context
- *					Special mode for tick emultation
+ *	HRTIMER_CB_IRQSAFE_PERCPU:	Callback must run in hardirq context
+ *					Special mode for tick emulation and
+ *					scheduler timer. Such timers are per
+ *					cpu and not allowed to be migrated on
+ *					cpu unplug.
+ *	HRTIMER_CB_IRQSAFE_UNLOCKED:	Callback should run in hardirq context
+ *					with timer->base lock unlocked
+ *					used for timers which call wakeup to
+ *					avoid lock order problems with rq->lock
  */
 enum hrtimer_cb_mode {
 	HRTIMER_CB_SOFTIRQ,
 	HRTIMER_CB_IRQSAFE,
 	HRTIMER_CB_IRQSAFE_NO_RESTART,
-	HRTIMER_CB_IRQSAFE_NO_SOFTIRQ,
+	HRTIMER_CB_IRQSAFE_PERCPU,
+	HRTIMER_CB_IRQSAFE_UNLOCKED,
 };
 
 /*
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index ace723dd1e52..cdec83e722fa 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -672,13 +672,14 @@ static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
 			 */
 			BUG_ON(timer->function(timer) != HRTIMER_NORESTART);
 			return 1;
-		case HRTIMER_CB_IRQSAFE_NO_SOFTIRQ:
+		case HRTIMER_CB_IRQSAFE_PERCPU:
+		case HRTIMER_CB_IRQSAFE_UNLOCKED:
 			/*
 			 * This is solely for the sched tick emulation with
 			 * dynamic tick support to ensure that we do not
 			 * restart the tick right on the edge and end up with
 			 * the tick timer in the softirq ! The calling site
-			 * takes care of this.
+			 * takes care of this. Also used for hrtimer sleeper !
 			 */
 			debug_hrtimer_deactivate(timer);
 			return 1;
@@ -1245,7 +1246,8 @@ static void __run_hrtimer(struct hrtimer *timer)
 	timer_stats_account_hrtimer(timer);
 
 	fn = timer->function;
-	if (timer->cb_mode == HRTIMER_CB_IRQSAFE_NO_SOFTIRQ) {
+	if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU ||
+	    timer->cb_mode == HRTIMER_CB_IRQSAFE_UNLOCKED) {
 		/*
 		 * Used for scheduler timers, avoid lock inversion with
 		 * rq->lock and tasklist_lock.
@@ -1452,7 +1454,7 @@ void hrtimer_init_sleeper(struct hrtimer_sleeper *sl, struct task_struct *task)
 	sl->timer.function = hrtimer_wakeup;
 	sl->task = task;
 #ifdef CONFIG_HIGH_RES_TIMERS
-	sl->timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ;
+	sl->timer.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED;
 #endif
 }
 
@@ -1592,7 +1594,7 @@ static void __cpuinit init_hrtimers_cpu(int cpu)
 #ifdef CONFIG_HOTPLUG_CPU
 
 static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
-				struct hrtimer_clock_base *new_base)
+				struct hrtimer_clock_base *new_base, int dcpu)
 {
 	struct hrtimer *timer;
 	struct rb_node *node;
@@ -1603,6 +1605,18 @@ static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
 		BUG_ON(hrtimer_callback_running(timer));
 		debug_hrtimer_deactivate(timer);
 
+		/*
+		 * Should not happen. Per CPU timers should be
+		 * canceled _before_ the migration code is called
+		 */
+		if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU) {
+			__remove_hrtimer(timer, old_base,
+					 HRTIMER_STATE_INACTIVE, 0);
+			WARN(1, "hrtimer (%p %p)active but cpu %d dead\n",
+			     timer, timer->function, dcpu);
+			continue;
+		}
+
 		/*
 		 * Mark it as STATE_MIGRATE not INACTIVE otherwise the
 		 * timer could be seen as !active and just vanish away
@@ -1619,12 +1633,11 @@ static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
 		/*
 		 * Happens with high res enabled when the timer was
 		 * already expired and the callback mode is
-		 * HRTIMER_CB_IRQSAFE_NO_SOFTIRQ
-		 * (hrtimer_sleeper). The enqueue code does not move
-		 * them to the soft irq pending list for
-		 * performance/latency reasons, but in the migration
-		 * state, we need to do that otherwise we end up with
-		 * a stale timer.
+		 * HRTIMER_CB_IRQSAFE_UNLOCKED (hrtimer_sleeper). The
+		 * enqueue code does not move them to the soft irq
+		 * pending list for performance/latency reasons, but
+		 * in the migration state, we need to do that
+		 * otherwise we end up with a stale timer.
 		 */
 		if (timer->state == HRTIMER_STATE_MIGRATE) {
 			timer->state = HRTIMER_STATE_PENDING;
@@ -1682,7 +1695,7 @@ static void migrate_hrtimers(int cpu)
 
 	for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
 		if (migrate_hrtimer_list(&old_base->clock_base[i],
-					 &new_base->clock_base[i]))
+					 &new_base->clock_base[i], cpu))
 			raise = 1;
 	}
 
diff --git a/kernel/sched.c b/kernel/sched.c
index 13dd2db9fb2d..ad1962dc0aa2 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -201,7 +201,7 @@ void init_rt_bandwidth(struct rt_bandwidth *rt_b, u64 period, u64 runtime)
 	hrtimer_init(&rt_b->rt_period_timer,
 			CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	rt_b->rt_period_timer.function = sched_rt_period_timer;
-	rt_b->rt_period_timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ;
+	rt_b->rt_period_timer.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED;
 }
 
 static void start_rt_bandwidth(struct rt_bandwidth *rt_b)
@@ -1119,7 +1119,7 @@ static void init_rq_hrtick(struct rq *rq)
 
 	hrtimer_init(&rq->hrtick_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	rq->hrtick_timer.function = hrtick;
-	rq->hrtick_timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ;
+	rq->hrtick_timer.cb_mode = HRTIMER_CB_IRQSAFE_PERCPU;
 }
 #else
 static inline void hrtick_clear(struct rq *rq)
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 39019b3f7621..cb02324bdb88 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -625,7 +625,7 @@ void tick_setup_sched_timer(void)
 	 */
 	hrtimer_init(&ts->sched_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
 	ts->sched_timer.function = tick_sched_timer;
-	ts->sched_timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ;
+	ts->sched_timer.cb_mode = HRTIMER_CB_IRQSAFE_PERCPU;
 
 	/* Get the next period (per cpu) */
 	ts->sched_timer.expires = tick_init_jiffy_update();
diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c
index bb948e52ce20..db58fb66a135 100644
--- a/kernel/trace/trace_sysprof.c
+++ b/kernel/trace/trace_sysprof.c
@@ -202,7 +202,7 @@ static void start_stack_timer(int cpu)
 
 	hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	hrtimer->function = stack_trace_timer_fn;
-	hrtimer->cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ;
+	hrtimer->cb_mode = HRTIMER_CB_IRQSAFE_PERCPU;
 
 	hrtimer_start(hrtimer, ns_to_ktime(sample_period), HRTIMER_MODE_REL);
 }
-- 
cgit v1.2.3


From 31a78f23bac0069004e69f98808b6988baccb6b6 Mon Sep 17 00:00:00 2001
From: Balbir Singh <balbir@linux.vnet.ibm.com>
Date: Sun, 28 Sep 2008 23:09:31 +0100
Subject: mm owner: fix race between swapoff and exit

There's a race between mm->owner assignment and swapoff, more easily
seen when task slab poisoning is turned on.  The condition occurs when
try_to_unuse() runs in parallel with an exiting task.  A similar race
can occur with callers of get_task_mm(), such as /proc/<pid>/<mmstats>
or ptrace or page migration.

CPU0                                    CPU1
                                        try_to_unuse
                                        looks at mm = task0->mm
                                        increments mm->mm_users
task 0 exits
mm->owner needs to be updated, but no
new owner is found (mm_users > 1, but
no other task has task->mm = task0->mm)
mm_update_next_owner() leaves
                                        mmput(mm) decrements mm->mm_users
task0 freed
                                        dereferencing mm->owner fails

The fix is to notify the subsystem via mm_owner_changed callback(),
if no new owner is found, by specifying the new task as NULL.

Jiri Slaby:
mm->owner was set to NULL prior to calling cgroup_mm_owner_callbacks(), but
must be set after that, so as not to pass NULL as old owner causing oops.

Daisuke Nishimura:
mm_update_next_owner() may set mm->owner to NULL, but mem_cgroup_from_task()
and its callers need to take account of this situation to avoid oops.

Hugh Dickins:
Lockdep warning and hang below exec_mmap() when testing these patches.
exit_mm() up_reads mmap_sem before calling mm_update_next_owner(),
so exec_mmap() now needs to do the same.  And with that repositioning,
there's now no point in mm_need_new_owner() allowing for NULL mm.

Reported-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/exec.c       |  2 +-
 kernel/cgroup.c |  5 +++--
 kernel/exit.c   | 12 ++++++++++--
 mm/memcontrol.c | 17 +++++++++++++++++
 4 files changed, 31 insertions(+), 5 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index 32993beecbe9..cecee501ce78 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -752,11 +752,11 @@ static int exec_mmap(struct mm_struct *mm)
 	tsk->active_mm = mm;
 	activate_mm(active_mm, mm);
 	task_unlock(tsk);
-	mm_update_next_owner(old_mm);
 	arch_pick_mmap_layout(mm);
 	if (old_mm) {
 		up_read(&old_mm->mmap_sem);
 		BUG_ON(active_mm != old_mm);
+		mm_update_next_owner(old_mm);
 		mmput(old_mm);
 		return 0;
 	}
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 13932abde159..a0123d75ec9a 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -2738,14 +2738,15 @@ void cgroup_fork_callbacks(struct task_struct *child)
  */
 void cgroup_mm_owner_callbacks(struct task_struct *old, struct task_struct *new)
 {
-	struct cgroup *oldcgrp, *newcgrp;
+	struct cgroup *oldcgrp, *newcgrp = NULL;
 
 	if (need_mm_owner_callback) {
 		int i;
 		for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
 			struct cgroup_subsys *ss = subsys[i];
 			oldcgrp = task_cgroup(old, ss->subsys_id);
-			newcgrp = task_cgroup(new, ss->subsys_id);
+			if (new)
+				newcgrp = task_cgroup(new, ss->subsys_id);
 			if (oldcgrp == newcgrp)
 				continue;
 			if (ss->mm_owner_changed)
diff --git a/kernel/exit.c b/kernel/exit.c
index 16395644a98f..85a83c831856 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -583,8 +583,6 @@ mm_need_new_owner(struct mm_struct *mm, struct task_struct *p)
 	 * If there are other users of the mm and the owner (us) is exiting
 	 * we need to find a new owner to take on the responsibility.
 	 */
-	if (!mm)
-		return 0;
 	if (atomic_read(&mm->mm_users) <= 1)
 		return 0;
 	if (mm->owner != p)
@@ -627,6 +625,16 @@ retry:
 	} while_each_thread(g, c);
 
 	read_unlock(&tasklist_lock);
+	/*
+	 * We found no owner yet mm_users > 1: this implies that we are
+	 * most likely racing with swapoff (try_to_unuse()) or /proc or
+	 * ptrace or page migration (get_task_mm()).  Mark owner as NULL,
+	 * so that subsystems can understand the callback and take action.
+	 */
+	down_write(&mm->mmap_sem);
+	cgroup_mm_owner_callbacks(mm->owner, NULL);
+	mm->owner = NULL;
+	up_write(&mm->mmap_sem);
 	return;
 
 assign_new_owner:
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index c0500e4d3a2f..36896f3eb7f5 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -250,6 +250,14 @@ static struct mem_cgroup *mem_cgroup_from_cont(struct cgroup *cont)
 
 struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p)
 {
+	/*
+	 * mm_update_next_owner() may clear mm->owner to NULL
+	 * if it races with swapoff, page migration, etc.
+	 * So this can be called with p == NULL.
+	 */
+	if (unlikely(!p))
+		return NULL;
+
 	return container_of(task_subsys_state(p, mem_cgroup_subsys_id),
 				struct mem_cgroup, css);
 }
@@ -549,6 +557,11 @@ static int mem_cgroup_charge_common(struct page *page, struct mm_struct *mm,
 	if (likely(!memcg)) {
 		rcu_read_lock();
 		mem = mem_cgroup_from_task(rcu_dereference(mm->owner));
+		if (unlikely(!mem)) {
+			rcu_read_unlock();
+			kmem_cache_free(page_cgroup_cache, pc);
+			return 0;
+		}
 		/*
 		 * For every charge from the cgroup, increment reference count
 		 */
@@ -801,6 +814,10 @@ int mem_cgroup_shrink_usage(struct mm_struct *mm, gfp_t gfp_mask)
 
 	rcu_read_lock();
 	mem = mem_cgroup_from_task(rcu_dereference(mm->owner));
+	if (unlikely(!mem)) {
+		rcu_read_unlock();
+		return 0;
+	}
 	css_get(&mem->css);
 	rcu_read_unlock();
 
-- 
cgit v1.2.3


From 94aca1dac6f6d21f4b07e4864baf7768cabcc6e7 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon, 29 Sep 2008 15:24:02 -0700
Subject: Linux 2.6.27-rc8

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index cab896a97296..1d03c1644ddb 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 27
-EXTRAVERSION = -rc7
+EXTRAVERSION = -rc8
 NAME = Rotary Wombat
 
 # *DOCUMENTATION*
-- 
cgit v1.2.3


From c459ce8b5a7d933a3bcf6915ab17ac1e036e2ac4 Mon Sep 17 00:00:00 2001
From: Tony Luck <tony.luck@intel.com>
Date: Mon, 29 Sep 2008 16:39:19 -0700
Subject: [IA64] Put the space for cpu0 per-cpu area into .data section

Initial fix for making sure that we can access percpu variables
in all C code (commit: 10617bbe84628eb18ab5f723d3ba35005adde143)
inadvertantly allocated the memory in the "percpu" section of
the vmlinux ELF executable.  This confused kexec/dump.

Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/include/asm/sections.h | 3 +++
 arch/ia64/kernel/head.S          | 9 +++++----
 arch/ia64/kernel/vmlinux.lds.S   | 8 +++++---
 arch/ia64/mm/contig.c            | 2 +-
 arch/ia64/mm/discontig.c         | 2 +-
 5 files changed, 15 insertions(+), 9 deletions(-)

diff --git a/arch/ia64/include/asm/sections.h b/arch/ia64/include/asm/sections.h
index f66799891036..1a873b36a4a1 100644
--- a/arch/ia64/include/asm/sections.h
+++ b/arch/ia64/include/asm/sections.h
@@ -11,6 +11,9 @@
 #include <asm-generic/sections.h>
 
 extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
+#ifdef	CONFIG_SMP
+extern char __cpu0_per_cpu[];
+#endif
 extern char __start___vtop_patchlist[], __end___vtop_patchlist[];
 extern char __start___rse_patchlist[], __end___rse_patchlist[];
 extern char __start___mckinley_e9_bundles[], __end___mckinley_e9_bundles[];
diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index 8bdea8eb62e3..66e491d8baac 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -367,16 +367,17 @@ start_ap:
 	;;
 #else
 (isAP)	br.few 2f
-	mov r20=r19
-	sub r19=r19,r18
+	movl r20=__cpu0_per_cpu
 	;;
 	shr.u r18=r18,3
 1:
-	ld8 r21=[r20],8;;
-	st8[r19]=r21,8
+	ld8 r21=[r19],8;;
+	st8[r20]=r21,8
 	adds r18=-1,r18;;
 	cmp4.lt p7,p6=0,r18
 (p7)	br.cond.dptk.few 1b
+	mov r19=r20
+	;;
 2:
 #endif
 	tpa r19=r19
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index de71da811cd6..10a7d47e8510 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -215,9 +215,6 @@ SECTIONS
   /* Per-cpu data: */
   percpu : { } :percpu
   . = ALIGN(PERCPU_PAGE_SIZE);
-#ifdef	CONFIG_SMP
-  . = . + PERCPU_PAGE_SIZE;	/* cpu0 per-cpu space */
-#endif
   __phys_per_cpu_start = .;
   .data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - LOAD_OFFSET)
 	{
@@ -233,6 +230,11 @@ SECTIONS
   data : { } :data
   .data : AT(ADDR(.data) - LOAD_OFFSET)
 	{
+#ifdef	CONFIG_SMP
+  . = ALIGN(PERCPU_PAGE_SIZE);
+		__cpu0_per_cpu = .;
+  . = . + PERCPU_PAGE_SIZE;	/* cpu0 per-cpu space */
+#endif
 		DATA_DATA
 		*(.data1)
 		*(.gnu.linkonce.d*)
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index e566ff43884a..0ee085efbe29 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -163,7 +163,7 @@ per_cpu_init (void)
 	 * get_zeroed_page().
 	 */
 	if (first_time) {
-		void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE;
+		void *cpu0_data = __cpu0_per_cpu;
 
 		first_time=0;
 
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index 78026aabaa7f..d8c5fcd89e5b 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -144,7 +144,7 @@ static void *per_cpu_node_setup(void *cpu_data, int node)
 
 	for_each_possible_early_cpu(cpu) {
 		if (cpu == 0) {
-			void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE;
+			void *cpu0_data = __cpu0_per_cpu;
 			__per_cpu_offset[cpu] = (char*)cpu0_data -
 				__per_cpu_start;
 		} else if (node == node_cpuid[cpu].nid) {
-- 
cgit v1.2.3


From ad611045ce5d059af84a9855b22ca3f7a99d47be Mon Sep 17 00:00:00 2001
From: David Gibson <david@gibson.dropbear.id.au>
Date: Wed, 24 Sep 2008 16:39:04 +0000
Subject: powerpc: Fix PCI in Holly device tree

The PCI bridge on the Holly board is incorrectly represented in the
device tree.  The current device tree node for the PCI bridge sits
under the tsi-bridge node.  That's not obviously wrong, but the PCI
bridge translates some PCI spaces into CPU address ranges which were
not translated by the "ranges" property in tsi-bridge node.

We used to get away with this problem because the PCI bridge discovery
code was also buggy, assuming incorrectly that PCI host bridge nodes
were always directly under the root bus and treating the translated
addresses as raw CPU addresses, rather than parent bus addresses.
This has since been fixed, thus breaking Holly.

This could be fixed by adding extra translations to the tsi-bridge
node, but this patch instead moves the Holly PCI bridge out of the
tsi-bridge node to the root bus.  This makes the tsi-bridge node
represent only the built-in IO devices in the bridge, with a
more-or-less contiguous address range.  This is the same convention
used on Freescale SoC chips, where the "soc" node represents only the
IMMR region, and the PCI and other bus bridges are separate nodes
under the root bus.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/holly.dts | 106 ++++++++++++++++++++--------------------
 1 file changed, 53 insertions(+), 53 deletions(-)

diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts
index f87fe7b9ced9..c6e11ebecebb 100644
--- a/arch/powerpc/boot/dts/holly.dts
+++ b/arch/powerpc/boot/dts/holly.dts
@@ -133,61 +133,61 @@
 			reg = <0x00007400 0x00000400>;
 			big-endian;
 		};
+	};
 
-		pci@1000 {
-			device_type = "pci";
-			compatible = "tsi109-pci", "tsi108-pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			reg = <0x00001000 0x00001000>;
-			bus-range = <0x0 0x0>;
-			/*----------------------------------------------------+
-			| PCI memory range.
-			| 01 denotes I/O space
-			| 02 denotes 32-bit memory space
-			+----------------------------------------------------*/
-			ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000
-				  0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>;
-			clock-frequency = <133333332>;
-			interrupt-parent = <&MPIC>;
+	pci@c0001000 {
+		device_type = "pci";
+		compatible = "tsi109-pci", "tsi108-pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xc0001000 0x00001000>;
+		bus-range = <0x0 0x0>;
+		/*----------------------------------------------------+
+		| PCI memory range.
+		| 01 denotes I/O space
+		| 02 denotes 32-bit memory space
+		+----------------------------------------------------*/
+		ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000
+			  0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>;
+		clock-frequency = <133333332>;
+		interrupt-parent = <&MPIC>;
+		interrupts = <0x17 0x2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		/*----------------------------------------------------+
+		| The INTA, INTB, INTC, INTD are shared.
+		+----------------------------------------------------*/
+		interrupt-map = <
+			0x800 0x0 0x0 0x1 &RT0 0x24 0x0
+			0x800 0x0 0x0 0x2 &RT0 0x25 0x0
+			0x800 0x0 0x0 0x3 &RT0 0x26 0x0
+			0x800 0x0 0x0 0x4 &RT0 0x27 0x0
+
+			0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
+			0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
+			0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
+			0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
+
+			0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
+			0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
+			0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
+			0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
+
+			0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
+			0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
+			0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
+			0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
+			>;
+
+		RT0: router@1180 {
+			device_type = "pic-router";
+			interrupt-controller;
+			big-endian;
+			clock-frequency = <0>;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
 			interrupts = <0x17 0x2>;
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			/*----------------------------------------------------+
-			| The INTA, INTB, INTC, INTD are shared.
-			+----------------------------------------------------*/
-			interrupt-map = <
-				0x800 0x0 0x0 0x1 &RT0 0x24 0x0
-				0x800 0x0 0x0 0x2 &RT0 0x25 0x0
-				0x800 0x0 0x0 0x3 &RT0 0x26 0x0
-				0x800 0x0 0x0 0x4 &RT0 0x27 0x0
-
-				0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
-				0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
-				0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
-				0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
-
-				0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
-				0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
-				0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
-				0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
-
-				0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
-				0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
-				0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
-				0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
-				>;
-
-			RT0: router@1180 {
- 				device_type = "pic-router";
- 				interrupt-controller;
- 				big-endian;
- 				clock-frequency = <0>;
- 				#address-cells = <0>;
- 				#interrupt-cells = <2>;
- 				interrupts = <0x17 0x2>;
-				interrupt-parent = <&MPIC>;
-			};
+			interrupt-parent = <&MPIC>;
 		};
 	};
 
-- 
cgit v1.2.3


From 61e9916eba35dfb76d38013a5aae9a59cc50877a Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Wed, 24 Sep 2008 22:56:25 +0000
Subject: powerpc: Fix failure to shutdown with CPU hotplug

I tracked down the shutdown regression to CPUs not dying
when being shut down during power-off. This turns out to
be due to the system_state being SYSTEM_POWER_OFF, which
this code doesn't take as a valid state for shutting off
CPUs in.

This has never made sense to me, but when I added hotplug
code to implement hibernate I only "made it work" and did
not question the need to check the system_state. Thomas
Gleixner helped me dig, but the only thing we found is
that it was added with the original commit that added CPU
hotplug support.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/idle.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index d308a9f70f1b..31982d05d81a 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -34,11 +34,7 @@
 #include <asm/smp.h>
 
 #ifdef CONFIG_HOTPLUG_CPU
-/* this is used for software suspend, and that shuts down
- * CPUs even while the system is still booting... */
-#define cpu_should_die()	(cpu_is_offline(smp_processor_id()) && \
-				   (system_state == SYSTEM_RUNNING     \
-				 || system_state == SYSTEM_BOOTING))
+#define cpu_should_die()	cpu_is_offline(smp_processor_id())
 #else
 #define cpu_should_die()	0
 #endif
-- 
cgit v1.2.3


From 2eedd6047b050f82f4e596a50704686ec989c1c8 Mon Sep 17 00:00:00 2001
From: Samuel Ortiz <sameo@openedhand.com>
Date: Thu, 25 Sep 2008 00:39:05 +0200
Subject: mfd: Fix Kconfig accroding to the new gpiolib symbols

HAVE_GPIO_LIB has basically been replaced by GPIOLIB

Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
---
 drivers/mfd/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 10c44d3fe01a..68dc8d9eb24e 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -21,7 +21,7 @@ config MFD_SM501
 
 config MFD_SM501_GPIO
 	bool "Export GPIO via GPIO layer"
-	depends on MFD_SM501 && HAVE_GPIO_LIB
+	depends on MFD_SM501 && GPIOLIB
 	 ---help---
 	 This option uses the gpio library layer to export the 64 GPIO
 	 lines on the SM501. The platform data is used to supply the
@@ -29,7 +29,7 @@ config MFD_SM501_GPIO
 
 config MFD_ASIC3
 	bool "Support for Compaq ASIC3"
-	depends on GENERIC_HARDIRQS && HAVE_GPIO_LIB && ARM
+	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
 	 ---help---
 	  This driver supports the ASIC3 multifunction chip found on many
 	  PDAs (mainly iPAQ and HTC based ones)
-- 
cgit v1.2.3


From 6cac6e8489af6c419cb6af6911535a280e6b6c2e Mon Sep 17 00:00:00 2001
From: Samuel Ortiz <sameo@openedhand.com>
Date: Thu, 25 Sep 2008 00:43:59 +0200
Subject: mfd: Fix asic3 compilation

map_size was declared from the wrong place.

Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
---
 drivers/mfd/asic3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index bc2a807f210d..ba5aa2008273 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -312,7 +312,6 @@ static int __init asic3_irq_probe(struct platform_device *pdev)
 	struct asic3 *asic = platform_get_drvdata(pdev);
 	unsigned long clksel = 0;
 	unsigned int irq, irq_base;
-	int map_size;
 	int ret;
 
 	ret = platform_get_irq(pdev, 0);
@@ -534,6 +533,7 @@ static int __init asic3_probe(struct platform_device *pdev)
 	struct asic3 *asic;
 	struct resource *mem;
 	unsigned long clksel;
+	int map_size;
 	int ret = 0;
 
 	asic = kzalloc(sizeof(struct asic3), GFP_KERNEL);
-- 
cgit v1.2.3


From 3dcd7e269d2223126f6ee9bc893f5a6166e1770d Mon Sep 17 00:00:00 2001
From: "J.A. Magallón" <jamagallon@ono.com>
Date: Tue, 30 Sep 2008 10:02:52 +0200
Subject: x86: fix typo in enable_mtrr_cleanup early parameter

Correct typo for 'enable_mtrr_cleanup' early boot param name.

Signed-off-by: J.A. Magallon <jamagallon@ono.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index b117d7f8a564..885c8265e6b5 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -834,7 +834,7 @@ static int __init enable_mtrr_cleanup_setup(char *str)
 		enable_mtrr_cleanup = 1;
 	return 0;
 }
-early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup);
+early_param("enable_mtrr_cleanup", enable_mtrr_cleanup_setup);
 
 struct var_mtrr_state {
 	unsigned long	range_startk;
-- 
cgit v1.2.3


From d01dbeb6af7a0848063033f73c3d146fec7451f3 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Tue, 30 Sep 2008 02:03:19 -0700
Subject: ipsec: Fix pskb_expand_head corruption in xfrm_state_check_space

We're never supposed to shrink the headroom or tailroom.  In fact,
shrinking the headroom is a fatal action.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/xfrm/xfrm_output.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index ac25b4c0e982..dc50f1e71f76 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -27,10 +27,14 @@ static int xfrm_state_check_space(struct xfrm_state *x, struct sk_buff *skb)
 		- skb_headroom(skb);
 	int ntail = dst->dev->needed_tailroom - skb_tailroom(skb);
 
-	if (nhead > 0 || ntail > 0)
-		return pskb_expand_head(skb, nhead, ntail, GFP_ATOMIC);
-
-	return 0;
+	if (nhead <= 0) {
+		if (ntail <= 0)
+			return 0;
+		nhead = 0;
+	} else if (ntail < 0)
+		ntail = 0;
+
+	return pskb_expand_head(skb, nhead, ntail, GFP_ATOMIC);
 }
 
 static int xfrm_output_one(struct sk_buff *skb, int err)
-- 
cgit v1.2.3


From 8b122efd13a227d35d5ca242561770db1b5e3658 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Tue, 30 Sep 2008 03:03:35 -0700
Subject: iucv: Fix mismerge again.

fb65a7c091529bfffb1262515252c0d0f6241c5c ("iucv: Fix bad merging.") fixed
a merge error, but in a wrong way. We now end up with the bug below.
This patch corrects the mismerge like it was intended.

BUG: scheduling while atomic: swapper/1/0x00000000
Modules linked in:
CPU: 1 Not tainted 2.6.27-rc7-00094-gc0f4d6d #9
Process swapper (pid: 1, task: 000000003fe7d988, ksp: 000000003fe838c0)
0000000000000000 000000003fe839b8 0000000000000002 0000000000000000
       000000003fe83a58 000000003fe839d0 000000003fe839d0 0000000000390de6
       000000000058acd8 00000000000000d0 000000003fe7dcd8 0000000000000000
       000000000000000c 000000000000000d 0000000000000000 000000003fe83a28
       000000000039c5b8 0000000000015e5e 000000003fe839b8 000000003fe83a00
Call Trace:
([<0000000000015d6a>] show_trace+0xe6/0x134)
 [<0000000000039656>] __schedule_bug+0xa2/0xa8
 [<0000000000391744>] schedule+0x49c/0x910
 [<0000000000391f64>] schedule_timeout+0xc4/0x114
 [<00000000003910d4>] wait_for_common+0xe8/0x1b4
 [<00000000000549ae>] call_usermodehelper_exec+0xa6/0xec
 [<00000000001af7b8>] kobject_uevent_env+0x418/0x438
 [<00000000001d08fc>] bus_add_driver+0x1e4/0x298
 [<00000000001d1ee4>] driver_register+0x90/0x18c
 [<0000000000566848>] netiucv_init+0x168/0x2c8
 [<00000000000120be>] do_one_initcall+0x3e/0x17c
 [<000000000054a31a>] kernel_init+0x1ce/0x248
 [<000000000001a97a>] kernel_thread_starter+0x6/0xc
 [<000000000001a974>] kernel_thread_starter+0x0/0xc
 iucv: NETIUCV driver initialized
initcall netiucv_init+0x0/0x2c8 returned with preemption imbalance

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/iucv/iucv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c
index 705959b31e24..d7b54b5bfa69 100644
--- a/net/iucv/iucv.c
+++ b/net/iucv/iucv.c
@@ -524,7 +524,6 @@ static int iucv_enable(void)
 	get_online_cpus();
 	for_each_online_cpu(cpu)
 		smp_call_function_single(cpu, iucv_declare_cpu, NULL, 1);
-	preempt_enable();
 	if (cpus_empty(iucv_buffer_cpumask))
 		/* No cpu could declare an iucv buffer. */
 		goto out_path;
@@ -547,7 +546,9 @@ out:
  */
 static void iucv_disable(void)
 {
+	get_online_cpus();
 	on_each_cpu(iucv_retrieve_cpu, NULL, 1);
+	put_online_cpus();
 	kfree(iucv_path_table);
 }
 
-- 
cgit v1.2.3


From e3145dfb7b4262fa55907006b75da799de8c1be3 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Tue, 30 Sep 2008 11:40:37 +0200
Subject: ALSA: ASoC: Fix cs4270 error path

The error path in cs4270_probe/cs4270_remove is pretty broken:
* If cs4270_probe fails, codec is leaked.
* If snd_soc_register_card fails, cs4270_i2c_driver stays registered.
* If I2C support is enabled but no I2C device is found, i2c_del_driver
  is never called (neither in cs4270_probe nor in cs4270_remove.

Fix all 3 problems by implementing a clean error path in cs4270_probe
and jumping to its labels as needed.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/soc/codecs/cs4270.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index d68650de39bc..0bbd94501d7e 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -681,7 +681,7 @@ static int cs4270_probe(struct platform_device *pdev)
 	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
 	if (ret < 0) {
 		printk(KERN_ERR "cs4270: failed to create PCMs\n");
-		return ret;
+		goto error_free_codec;
 	}
 
 #ifdef USE_I2C
@@ -690,8 +690,7 @@ static int cs4270_probe(struct platform_device *pdev)
 	ret = i2c_add_driver(&cs4270_i2c_driver);
 	if (ret) {
 		printk(KERN_ERR "cs4270: failed to attach driver");
-		snd_soc_free_pcms(socdev);
-		return ret;
+		goto error_free_pcms;
 	}
 
 	/* Did we find a CS4270 on the I2C bus? */
@@ -713,10 +712,23 @@ static int cs4270_probe(struct platform_device *pdev)
 	ret = snd_soc_register_card(socdev);
 	if (ret < 0) {
 		printk(KERN_ERR "cs4270: failed to register card\n");
-		snd_soc_free_pcms(socdev);
-		return ret;
+		goto error_del_driver;
 	}
 
+	return 0;
+
+error_del_driver:
+#ifdef USE_I2C
+	i2c_del_driver(&cs4270_i2c_driver);
+
+error_free_pcms:
+#endif
+	snd_soc_free_pcms(socdev);
+
+error_free_codec:
+	kfree(socdev->codec);
+	socdev->codec = NULL;
+
 	return ret;
 }
 
@@ -727,8 +739,7 @@ static int cs4270_remove(struct platform_device *pdev)
 	snd_soc_free_pcms(socdev);
 
 #ifdef USE_I2C
-	if (socdev->codec->control_data)
-		i2c_del_driver(&cs4270_i2c_driver);
+	i2c_del_driver(&cs4270_i2c_driver);
 #endif
 
 	kfree(socdev->codec);
-- 
cgit v1.2.3


From 24918b61b55c21e09a3e07cd82e1b3a8154782dc Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Tue, 30 Sep 2008 12:58:54 +0200
Subject: ALSA: hda - Fix model for Dell Inspiron 1525

Dell Inspiron 1525 seems to have a buggy BIOS setup and screws up
the recent codec parser, as reported by Oleksandr Natalenko:
    http://lkml.org/lkml/2008/9/12/203

This patch adds the working model, dell-3stack, statically.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>
---
 sound/pci/hda/patch_sigmatel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index ad994fcab725..f3da621f25c5 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1683,8 +1683,8 @@ static struct snd_pci_quirk stac927x_cfg_tbl[] = {
 	/* Dell 3 stack systems with verb table in BIOS */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x01f3, "Dell Inspiron 1420", STAC_DELL_BIOS),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x0227, "Dell Vostro 1400  ", STAC_DELL_BIOS),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x022f, "Dell     ", STAC_DELL_BIOS),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x022e, "Dell     ", STAC_DELL_BIOS),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x022f, "Dell Inspiron 1525", STAC_DELL_3ST),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x0242, "Dell     ", STAC_DELL_BIOS),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x0243, "Dell     ", STAC_DELL_BIOS),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x02ff, "Dell     ", STAC_DELL_BIOS),
-- 
cgit v1.2.3


From ba0166708ef4da7eeb61dd92bbba4d5a749d6561 Mon Sep 17 00:00:00 2001
From: Wei Yongjun <yjwei@cn.fujitsu.com>
Date: Tue, 30 Sep 2008 05:32:24 -0700
Subject: sctp: Fix kernel panic while process protocol violation parameter

Since call to function sctp_sf_abort_violation() need paramter 'arg' with
'struct sctp_chunk' type, it will read the chunk type and chunk length from
the chunk_hdr member of chunk. But call to sctp_sf_violation_paramlen()
always with 'struct sctp_paramhdr' type's parameter, it will be passed to
sctp_sf_abort_violation(). This may cause kernel panic.

   sctp_sf_violation_paramlen()
     |-- sctp_sf_abort_violation()
        |-- sctp_make_abort_violation()

This patch fixed this problem. This patch also fix two place which called
sctp_sf_violation_paramlen() with wrong paramter type.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/sctp/sm.h    |  3 +++
 net/sctp/sm_make_chunk.c | 37 ++++++++++++++++++++++++-------------
 net/sctp/sm_statefuns.c  | 48 +++++++++++++++++++++++++++++++++++++-----------
 3 files changed, 64 insertions(+), 24 deletions(-)

diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h
index 24811732bdb2..029a54a02396 100644
--- a/include/net/sctp/sm.h
+++ b/include/net/sctp/sm.h
@@ -227,6 +227,9 @@ struct sctp_chunk *sctp_make_abort_violation(const struct sctp_association *,
 				   const struct sctp_chunk *,
 				   const __u8 *,
 				   const size_t );
+struct sctp_chunk *sctp_make_violation_paramlen(const struct sctp_association *,
+				   const struct sctp_chunk *,
+				   struct sctp_paramhdr *);
 struct sctp_chunk *sctp_make_heartbeat(const struct sctp_association *,
 				  const struct sctp_transport *,
 				  const void *payload,
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index b599cbba4fbe..d68869f966c3 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -1012,6 +1012,29 @@ end:
 	return retval;
 }
 
+struct sctp_chunk *sctp_make_violation_paramlen(
+	const struct sctp_association *asoc,
+	const struct sctp_chunk *chunk,
+	struct sctp_paramhdr *param)
+{
+	struct sctp_chunk *retval;
+	static const char error[] = "The following parameter had invalid length:";
+	size_t payload_len = sizeof(error) + sizeof(sctp_errhdr_t) +
+				sizeof(sctp_paramhdr_t);
+
+	retval = sctp_make_abort(asoc, chunk, payload_len);
+	if (!retval)
+		goto nodata;
+
+	sctp_init_cause(retval, SCTP_ERROR_PROTO_VIOLATION,
+			sizeof(error) + sizeof(sctp_paramhdr_t));
+	sctp_addto_chunk(retval, sizeof(error), error);
+	sctp_addto_param(retval, sizeof(sctp_paramhdr_t), param);
+
+nodata:
+	return retval;
+}
+
 /* Make a HEARTBEAT chunk.  */
 struct sctp_chunk *sctp_make_heartbeat(const struct sctp_association *asoc,
 				  const struct sctp_transport *transport,
@@ -1782,11 +1805,6 @@ static int sctp_process_inv_paramlength(const struct sctp_association *asoc,
 					const struct sctp_chunk *chunk,
 					struct sctp_chunk **errp)
 {
-	static const char error[] = "The following parameter had invalid length:";
-	size_t		payload_len = WORD_ROUND(sizeof(error)) +
-						sizeof(sctp_paramhdr_t);
-
-
 	/* This is a fatal error.  Any accumulated non-fatal errors are
 	 * not reported.
 	 */
@@ -1794,14 +1812,7 @@ static int sctp_process_inv_paramlength(const struct sctp_association *asoc,
 		sctp_chunk_free(*errp);
 
 	/* Create an error chunk and fill it in with our payload. */
-	*errp = sctp_make_op_error_space(asoc, chunk, payload_len);
-
-	if (*errp) {
-		sctp_init_cause(*errp, SCTP_ERROR_PROTO_VIOLATION,
-				sizeof(error) + sizeof(sctp_paramhdr_t));
-		sctp_addto_chunk(*errp, sizeof(error), error);
-		sctp_addto_param(*errp, sizeof(sctp_paramhdr_t), param);
-	}
+	*errp = sctp_make_violation_paramlen(asoc, chunk, param);
 
 	return 0;
 }
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 8848d329aa2c..7c622af2ce55 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -119,7 +119,7 @@ static sctp_disposition_t sctp_sf_violation_paramlen(
 				     const struct sctp_endpoint *ep,
 				     const struct sctp_association *asoc,
 				     const sctp_subtype_t type,
-				     void *arg,
+				     void *arg, void *ext,
 				     sctp_cmd_seq_t *commands);
 
 static sctp_disposition_t sctp_sf_violation_ctsn(
@@ -3425,7 +3425,7 @@ sctp_disposition_t sctp_sf_do_asconf(const struct sctp_endpoint *ep,
 	addr_param = (union sctp_addr_param *)hdr->params;
 	length = ntohs(addr_param->p.length);
 	if (length < sizeof(sctp_paramhdr_t))
-		return sctp_sf_violation_paramlen(ep, asoc, type,
+		return sctp_sf_violation_paramlen(ep, asoc, type, arg,
 			   (void *)addr_param, commands);
 
 	/* Verify the ASCONF chunk before processing it. */
@@ -3433,8 +3433,8 @@ sctp_disposition_t sctp_sf_do_asconf(const struct sctp_endpoint *ep,
 			    (sctp_paramhdr_t *)((void *)addr_param + length),
 			    (void *)chunk->chunk_end,
 			    &err_param))
-		return sctp_sf_violation_paramlen(ep, asoc, type,
-						  (void *)&err_param, commands);
+		return sctp_sf_violation_paramlen(ep, asoc, type, arg,
+						  (void *)err_param, commands);
 
 	/* ADDIP 5.2 E1) Compare the value of the serial number to the value
 	 * the endpoint stored in a new association variable
@@ -3542,8 +3542,8 @@ sctp_disposition_t sctp_sf_do_asconf_ack(const struct sctp_endpoint *ep,
 	    (sctp_paramhdr_t *)addip_hdr->params,
 	    (void *)asconf_ack->chunk_end,
 	    &err_param))
-		return sctp_sf_violation_paramlen(ep, asoc, type,
-			   (void *)&err_param, commands);
+		return sctp_sf_violation_paramlen(ep, asoc, type, arg,
+			   (void *)err_param, commands);
 
 	if (last_asconf) {
 		addip_hdr = (sctp_addiphdr_t *)last_asconf->subh.addip_hdr;
@@ -4240,12 +4240,38 @@ static sctp_disposition_t sctp_sf_violation_paramlen(
 				     const struct sctp_endpoint *ep,
 				     const struct sctp_association *asoc,
 				     const sctp_subtype_t type,
-				     void *arg,
-				     sctp_cmd_seq_t *commands) {
-	static const char err_str[] = "The following parameter had invalid length:";
+				     void *arg, void *ext,
+				     sctp_cmd_seq_t *commands)
+{
+	struct sctp_chunk *chunk =  arg;
+	struct sctp_paramhdr *param = ext;
+	struct sctp_chunk *abort = NULL;
 
-	return sctp_sf_abort_violation(ep, asoc, arg, commands, err_str,
-					sizeof(err_str));
+	if (sctp_auth_recv_cid(SCTP_CID_ABORT, asoc))
+		goto discard;
+
+	/* Make the abort chunk. */
+	abort = sctp_make_violation_paramlen(asoc, chunk, param);
+	if (!abort)
+		goto nomem;
+
+	sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort));
+	SCTP_INC_STATS(SCTP_MIB_OUTCTRLCHUNKS);
+
+	sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+			SCTP_ERROR(ECONNABORTED));
+	sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
+			SCTP_PERR(SCTP_ERROR_PROTO_VIOLATION));
+	SCTP_DEC_STATS(SCTP_MIB_CURRESTAB);
+
+discard:
+	sctp_sf_pdiscard(ep, asoc, SCTP_ST_CHUNK(0), arg, commands);
+
+	SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
+
+	return SCTP_DISPOSITION_ABORT;
+nomem:
+	return SCTP_DISPOSITION_NOMEM;
 }
 
 /* Handle a protocol violation when the peer trying to advance the
-- 
cgit v1.2.3


From de59985e3a623d4d5d6207f1777398ca0606ab1c Mon Sep 17 00:00:00 2001
From: Zachary Amsden <zach@vmware.com>
Date: Tue, 30 Sep 2008 11:02:12 -0700
Subject: x86: Fix broken LDT access in VMI

After investigating a JRE failure, I found this bug was introduced a
long time ago, and had already managed to survive another bugfix which
occurred on the same line.  The result is a total failure of the JRE due
to LDT selectors not working properly.

This one took a long time to rear up because LDT usage is not very
common, but the bug is quite serious.  It got introduced along with
another bug, already fixed, by 75b8bb3e56ca09a467fbbe5229bc68627f7445be

Signed-off-by: Zachary Amsden <zach@vmware.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Glauber de Oliveira Costa <gcosta@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/vmi_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index 6ca515d6db54..edfb09f30479 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -235,7 +235,7 @@ static void vmi_write_ldt_entry(struct desc_struct *dt, int entry,
 				const void *desc)
 {
 	u32 *ldt_entry = (u32 *)desc;
-	vmi_ops.write_idt_entry(dt, entry, ldt_entry[0], ldt_entry[1]);
+	vmi_ops.write_ldt_entry(dt, entry, ldt_entry[0], ldt_entry[1]);
 }
 
 static void vmi_load_sp0(struct tss_struct *tss,
-- 
cgit v1.2.3


From dc63b52673d71f9d49b9d72d263a9f32df18c3ee Mon Sep 17 00:00:00 2001
From: Zachary Amsden <zach@vmware.com>
Date: Tue, 30 Sep 2008 11:02:12 -0700
Subject: x86, vmi: fix broken LDT access

This one took a long time to rear up because LDT usage is not very
common, but the bug is quite serious.  It got introduced along with
another bug, already fixed, by 75b8bb3e56ca09a467fbbe5229bc68627f7445be

After investigating a JRE failure, I found this bug was introduced a long time
ago, and had already managed to survive another bugfix which occurred on the
same line.  The result is a total failure of the JRE due to LDT selectors not
working properly.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Cc: Glauber de Oliveira Costa <gcosta@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/vmi_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index 6ca515d6db54..edfb09f30479 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -235,7 +235,7 @@ static void vmi_write_ldt_entry(struct desc_struct *dt, int entry,
 				const void *desc)
 {
 	u32 *ldt_entry = (u32 *)desc;
-	vmi_ops.write_idt_entry(dt, entry, ldt_entry[0], ldt_entry[1]);
+	vmi_ops.write_ldt_entry(dt, entry, ldt_entry[0], ldt_entry[1]);
 }
 
 static void vmi_load_sp0(struct tss_struct *tss,
-- 
cgit v1.2.3


From 4dd7972d1204c3851a4092cecd2207e05eb29b09 Mon Sep 17 00:00:00 2001
From: Vitaliy Gusev <vgusev@openvz.org>
Date: Wed, 1 Oct 2008 01:51:39 -0700
Subject: tcp: Fix NULL dereference in tcp_4_send_ack()

Fix NULL dereference in tcp_4_send_ack().

As skb->dev is reset to NULL in tcp_v4_rcv() thus OOPS occurs:

BUG: unable to handle kernel NULL pointer dereference at 00000000000004d0
IP: [<ffffffff80498503>] tcp_v4_send_ack+0x203/0x250

Stack:  ffff810005dbb000 ffff810015c8acc0 e77b2c6e5f861600 a01610802e90cb6d
 0a08010100000000 88afffff88afffff 0000000080762be8 0000000115c872e8
 0004122000000000 0000000000000001 ffffffff80762b88 0000000000000020
Call Trace:
 <IRQ>  [<ffffffff80499c33>] tcp_v4_reqsk_send_ack+0x20/0x22
 [<ffffffff8049bce5>] tcp_check_req+0x108/0x14c
 [<ffffffff8047aaf7>] ? rt_intern_hash+0x322/0x33c
 [<ffffffff80499846>] tcp_v4_do_rcv+0x399/0x4ec
 [<ffffffff8045ce4b>] ? skb_checksum+0x4f/0x272
 [<ffffffff80485b74>] ? __inet_lookup_listener+0x14a/0x15c
 [<ffffffff8049babc>] tcp_v4_rcv+0x6a1/0x701
 [<ffffffff8047e739>] ip_local_deliver_finish+0x157/0x24a
 [<ffffffff8047ec9a>] ip_local_deliver+0x72/0x7c
 [<ffffffff8047e5bd>] ip_rcv_finish+0x38d/0x3b2
 [<ffffffff803d3548>] ? scsi_io_completion+0x19d/0x39e
 [<ffffffff8047ebe5>] ip_rcv+0x2a2/0x2e5
 [<ffffffff80462faa>] netif_receive_skb+0x293/0x303
 [<ffffffff80465a9b>] process_backlog+0x80/0xd0
 [<ffffffff802630b4>] ? __rcu_process_callbacks+0x125/0x1b4
 [<ffffffff8046560e>] net_rx_action+0xb9/0x17f
 [<ffffffff80234cc5>] __do_softirq+0xa3/0x164
 [<ffffffff8020c52c>] call_softirq+0x1c/0x28
 <EOI>  [<ffffffff8020de1c>] do_softirq+0x34/0x72
 [<ffffffff80234b8e>] local_bh_enable_ip+0x3f/0x50
 [<ffffffff804d43ca>] _spin_unlock_bh+0x12/0x14
 [<ffffffff804599cd>] release_sock+0xb8/0xc1
 [<ffffffff804a6f9a>] inet_stream_connect+0x146/0x25c
 [<ffffffff80243078>] ? autoremove_wake_function+0x0/0x38
 [<ffffffff8045751f>] sys_connect+0x68/0x8e
 [<ffffffff80291818>] ? fd_install+0x5f/0x68
 [<ffffffff80457784>] ? sock_map_fd+0x55/0x62
 [<ffffffff8020b39b>] system_call_after_swapgs+0x7b/0x80

Code: 41 10 11 d0 83 d0 00 4d 85 ed 89 45 c0 c7 45 c4 08 00 00 00 74 07 41 8b 45 04 89 45 c8 48 8b 43 20 8b 4d b8 48 8d 55 b0 48 89 de <48> 8b 80 d0 04 00 00 48 8b b8 60 01 00 00 e8 20 ae fe ff 65 48
RIP  [<ffffffff80498503>] tcp_v4_send_ack+0x203/0x250
 RSP <ffffffff80762b78>
CR2: 00000000000004d0

Signed-off-by: Vitaliy Gusev <vgusev@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/tcp_ipv4.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 1b4fee20fc93..011478e46c40 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -618,7 +618,7 @@ static void tcp_v4_send_ack(struct sk_buff *skb, u32 seq, u32 ack,
 			];
 	} rep;
 	struct ip_reply_arg arg;
-	struct net *net = dev_net(skb->dev);
+	struct net *net = dev_net(skb->dst->dev);
 
 	memset(&rep.th, 0, sizeof(struct tcphdr));
 	memset(&arg, 0, sizeof(arg));
-- 
cgit v1.2.3


From 2a5b82751f73a0bf6f604ce56d34adba6da1b246 Mon Sep 17 00:00:00 2001
From: "Denis V. Lunev" <den@openvz.org>
Date: Wed, 1 Oct 2008 02:13:16 -0700
Subject: ipv6: NULL pointer dereferrence in tcp_v6_send_ack

The following actions are possible:
tcp_v6_rcv
  skb->dev = NULL;
  tcp_v6_do_rcv
    tcp_v6_hnd_req
      tcp_check_req
        req->rsk_ops->send_ack == tcp_v6_send_ack

So, skb->dev can be NULL in tcp_v6_send_ack. We must obtain namespace
from dst entry.

Thanks to Vitaliy Gusev <vgusev@openvz.org> for initial problem finding
in IPv4 code.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/tcp_ipv6.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index b585c850a89a..10e22fd48222 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -1050,7 +1050,7 @@ static void tcp_v6_send_ack(struct sk_buff *skb, u32 seq, u32 ack, u32 win, u32
 	struct tcphdr *th = tcp_hdr(skb), *t1;
 	struct sk_buff *buff;
 	struct flowi fl;
-	struct net *net = dev_net(skb->dev);
+	struct net *net = dev_net(skb->dst->dev);
 	struct sock *ctl_sk = net->ipv6.tcp_sk;
 	unsigned int tot_len = sizeof(struct tcphdr);
 	__be32 *topt;
-- 
cgit v1.2.3


From 5dc121e9a7a8a3721cefeb07f3559f50fbedc67e Mon Sep 17 00:00:00 2001
From: Arnaud Ebalard <arno@natisbad.org>
Date: Wed, 1 Oct 2008 02:37:56 -0700
Subject: XFRM,IPv6: initialize ip6_dst_blackhole_ops.kmem_cachep

ip6_dst_blackhole_ops.kmem_cachep is not expected to be NULL (i.e. to
be initialized) when dst_alloc() is called from ip6_dst_blackhole().
Otherwise, it results in the following (xfrm_larval_drop is now set to
1 by default):

[   78.697642] Unable to handle kernel paging request for data at address 0x0000004c
[   78.703449] Faulting instruction address: 0xc0097f54
[   78.786896] Oops: Kernel access of bad area, sig: 11 [#1]
[   78.792791] PowerMac
[   78.798383] Modules linked in: btusb usbhid bluetooth b43 mac80211 cfg80211 ehci_hcd ohci_hcd sungem sungem_phy usbcore ssb
[   78.804263] NIP: c0097f54 LR: c0334a28 CTR: c002d430
[   78.809997] REGS: eef19ad0 TRAP: 0300   Not tainted  (2.6.27-rc5)
[   78.815743] MSR: 00001032 <ME,IR,DR>  CR: 22242482  XER: 20000000
[   78.821550] DAR: 0000004c, DSISR: 40000000
[   78.827278] TASK = eef0df40[3035] 'mip6d' THREAD: eef18000
[   78.827408] GPR00: 00001032 eef19b80 eef0df40 00000000 00008020 eef19c30 00000001 00000000
[   78.833249] GPR08: eee5101c c05a5c10 ef9ad500 00000000 24242422 1005787c 00000000 1004f960
[   78.839151] GPR16: 00000000 10024e90 10050040 48030018 0fe44150 00000000 00000000 eef19c30
[   78.845046] GPR24: eef19e44 00000000 eef19bf8 efb37c14 eef19bf8 00008020 00009032 c0596064
[   78.856671] NIP [c0097f54] kmem_cache_alloc+0x20/0x94
[   78.862581] LR [c0334a28] dst_alloc+0x40/0xc4
[   78.868451] Call Trace:
[   78.874252] [eef19b80] [c03c1810] ip6_dst_lookup_tail+0x1c8/0x1dc (unreliable)
[   78.880222] [eef19ba0] [c0334a28] dst_alloc+0x40/0xc4
[   78.886164] [eef19bb0] [c03cd698] ip6_dst_blackhole+0x28/0x1cc
[   78.892090] [eef19be0] [c03d9be8] rawv6_sendmsg+0x75c/0xc88
[   78.897999] [eef19cb0] [c038bca4] inet_sendmsg+0x4c/0x78
[   78.903907] [eef19cd0] [c03207c8] sock_sendmsg+0xac/0xe4
[   78.909734] [eef19db0] [c03209e4] sys_sendmsg+0x1e4/0x2a0
[   78.915540] [eef19f00] [c03220a8] sys_socketcall+0xfc/0x210
[   78.921406] [eef19f40] [c0014b3c] ret_from_syscall+0x0/0x38
[   78.927295] --- Exception: c01 at 0xfe2d730
[   78.927297]     LR = 0xfe2d71c
[   78.939019] Instruction dump:
[   78.944835] 91640018 9144001c 900a0000 4bffff44 9421ffe0 7c0802a6 bf810010 7c9d2378
[   78.950694] 90010024 7fc000a6 57c0045e 7c000124 <83e3004c> 8383005c 2f9f0000 419e0050
[   78.956464] ---[ end trace 05fa1ed7972487a1 ]---

As commented by Benjamin Thery, the bug was introduced by
f2fc6a54585a1be6669613a31fbaba2ecbadcd36, while adding network
namespaces support to ipv6 routes.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Acked-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/route.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 9af6115f0f50..63442a1e741c 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -2688,6 +2688,8 @@ int __init ip6_route_init(void)
 	if (ret)
 		goto out_kmem_cache;
 
+	ip6_dst_blackhole_ops.kmem_cachep = ip6_dst_ops_template.kmem_cachep;
+
 	/* Registering of the loopback is done before this portion of code,
 	 * the loopback reference in rt6_info will not be taken, do it
 	 * manually for init_net */
-- 
cgit v1.2.3


From 0523820482dcb42784572ffd2296c2f08c275a2b Mon Sep 17 00:00:00 2001
From: Timo Teras <timo.teras@iki.fi>
Date: Wed, 1 Oct 2008 05:17:54 -0700
Subject: af_key: Free dumping state on socket close

Fix a xfrm_{state,policy}_walk leak if pfkey socket is closed while
dumping is on-going.

Signed-off-by: Timo Teras <timo.teras@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/key/af_key.c | 30 +++++++++++++++++++-----------
 1 file changed, 19 insertions(+), 11 deletions(-)

diff --git a/net/key/af_key.c b/net/key/af_key.c
index d628df97e02e..b7f5a1c353ee 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -73,22 +73,18 @@ static int pfkey_can_dump(struct sock *sk)
 	return 0;
 }
 
-static int pfkey_do_dump(struct pfkey_sock *pfk)
+static void pfkey_terminate_dump(struct pfkey_sock *pfk)
 {
-	int rc;
-
-	rc = pfk->dump.dump(pfk);
-	if (rc == -ENOBUFS)
-		return 0;
-
-	pfk->dump.done(pfk);
-	pfk->dump.dump = NULL;
-	pfk->dump.done = NULL;
-	return rc;
+	if (pfk->dump.dump) {
+		pfk->dump.done(pfk);
+		pfk->dump.dump = NULL;
+		pfk->dump.done = NULL;
+	}
 }
 
 static void pfkey_sock_destruct(struct sock *sk)
 {
+	pfkey_terminate_dump(pfkey_sk(sk));
 	skb_queue_purge(&sk->sk_receive_queue);
 
 	if (!sock_flag(sk, SOCK_DEAD)) {
@@ -310,6 +306,18 @@ static int pfkey_broadcast(struct sk_buff *skb, gfp_t allocation,
 	return err;
 }
 
+static int pfkey_do_dump(struct pfkey_sock *pfk)
+{
+	int rc;
+
+	rc = pfk->dump.dump(pfk);
+	if (rc == -ENOBUFS)
+		return 0;
+
+	pfkey_terminate_dump(pfk);
+	return rc;
+}
+
 static inline void pfkey_hdr_dup(struct sadb_msg *new, struct sadb_msg *orig)
 {
 	*new = *orig;
-- 
cgit v1.2.3


From 5037108acd4dc40c210321cc83b0bf8352eda95a Mon Sep 17 00:00:00 2001
From: Mikulas Patocka <mpatocka@redhat.com>
Date: Wed, 1 Oct 2008 14:39:17 +0100
Subject: dm: always allow one page in dm_merge_bvec

Some callers assume they can always add at least one page to an empty bio,
so dm_merge_bvec should not return 0 in this case: we'll reject the I/O
later after the bio is submitted.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
---
 drivers/md/dm.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index bca448e11878..469cec54f371 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -837,10 +837,10 @@ static int dm_merge_bvec(struct request_queue *q,
 	struct dm_table *map = dm_get_table(md);
 	struct dm_target *ti;
 	sector_t max_sectors;
-	int max_size;
+	int max_size = 0;
 
 	if (unlikely(!map))
-		return 0;
+		goto out;
 
 	ti = dm_table_find_target(map, bvm->bi_sector);
 
@@ -861,14 +861,15 @@ static int dm_merge_bvec(struct request_queue *q,
 	if (max_size && ti->type->merge)
 		max_size = ti->type->merge(ti, bvm, biovec, max_size);
 
+	dm_table_put(map);
+
+out:
 	/*
 	 * Always allow an entire first page
 	 */
 	if (max_size <= biovec->bv_len && !(bvm->bi_size >> SECTOR_SHIFT))
 		max_size = biovec->bv_len;
 
-	dm_table_put(map);
-
 	return max_size;
 }
 
-- 
cgit v1.2.3


From b01cd5ac43b00c49759c126c21e7d22c7e80b245 Mon Sep 17 00:00:00 2001
From: Mikulas Patocka <mpatocka@redhat.com>
Date: Wed, 1 Oct 2008 14:39:24 +0100
Subject: dm: cope with access beyond end of device in dm_merge_bvec

If for any reason dm_merge_bvec() is given an offset beyond the end of the
device, avoid an oops and always allow one page to be added to an empty bio.
We'll reject the I/O later after the bio is submitted.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
---
 drivers/md/dm.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 469cec54f371..ace998ce59f6 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -843,6 +843,8 @@ static int dm_merge_bvec(struct request_queue *q,
 		goto out;
 
 	ti = dm_table_find_target(map, bvm->bi_sector);
+	if (!dm_target_is_valid(ti))
+		goto out_table;
 
 	/*
 	 * Find maximum amount of I/O that won't need splitting
@@ -861,6 +863,7 @@ static int dm_merge_bvec(struct request_queue *q,
 	if (max_size && ti->type->merge)
 		max_size = ti->type->merge(ti, bvm, biovec, max_size);
 
+out_table:
 	dm_table_put(map);
 
 out:
-- 
cgit v1.2.3


From 7253a33434245ee8243897559188186df65f3611 Mon Sep 17 00:00:00 2001
From: Chandra Seetharaman <sekharan@us.ibm.com>
Date: Wed, 1 Oct 2008 14:39:27 +0100
Subject: dm mpath: add missing path switching locking

Moving the path activation to workqueue along with scsi_dh patches introduced
a race. It is due to the fact that the current_pgpath (in the multipath data
structure) can be modified if changes happen in any of the paths leading to
the lun. If the changes lead to current_pgpath being set to NULL, then it
leads to the invalid access which results in the panic below.

This patch fixes that by storing the pgpath to activate in the multipath data
structure and properly protecting it.

Note that if activate_path is called twice in succession with different pgpath,
with the second one being called before the first one is done, then activate
path will be called twice for the second pgpath, which is fine.

Unable to handle kernel paging request for data at address 0x00000020
Faulting instruction address: 0xd000000000aa1844
cpu 0x1: Vector: 300 (Data Access) at [c00000006b987a80]
    pc: d000000000aa1844: .activate_path+0x30/0x218 [dm_multipath]
    lr: c000000000087a2c: .run_workqueue+0x114/0x204
    sp: c00000006b987d00
   msr: 8000000000009032
   dar: 20
 dsisr: 40000000
  current = 0xc0000000676bb3f0
  paca    = 0xc0000000006f3680
    pid   = 2528, comm = kmpath_handlerd
enter ? for help
[c00000006b987da0] c000000000087a2c .run_workqueue+0x114/0x204
[c00000006b987e40] c000000000088b58 .worker_thread+0x120/0x144
[c00000006b987f00] c00000000008ca70 .kthread+0x78/0xc4
[c00000006b987f90] c000000000027cc8 .kernel_thread+0x4c/0x68

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
---
 drivers/md/dm-mpath.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index 71dd65aa31b6..c2fcf28b4c70 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -63,6 +63,7 @@ struct multipath {
 
 	const char *hw_handler_name;
 	struct work_struct activate_path;
+	struct pgpath *pgpath_to_activate;
 	unsigned nr_priority_groups;
 	struct list_head priority_groups;
 	unsigned pg_init_required;	/* pg_init needs calling? */
@@ -146,6 +147,7 @@ static struct priority_group *alloc_priority_group(void)
 
 static void free_pgpaths(struct list_head *pgpaths, struct dm_target *ti)
 {
+	unsigned long flags;
 	struct pgpath *pgpath, *tmp;
 	struct multipath *m = ti->private;
 
@@ -154,6 +156,10 @@ static void free_pgpaths(struct list_head *pgpaths, struct dm_target *ti)
 		if (m->hw_handler_name)
 			scsi_dh_detach(bdev_get_queue(pgpath->path.dev->bdev));
 		dm_put_device(ti, pgpath->path.dev);
+		spin_lock_irqsave(&m->lock, flags);
+		if (m->pgpath_to_activate == pgpath)
+			m->pgpath_to_activate = NULL;
+		spin_unlock_irqrestore(&m->lock, flags);
 		free_pgpath(pgpath);
 	}
 }
@@ -421,6 +427,7 @@ static void process_queued_ios(struct work_struct *work)
 		__choose_pgpath(m);
 
 	pgpath = m->current_pgpath;
+	m->pgpath_to_activate = m->current_pgpath;
 
 	if ((pgpath && !m->queue_io) ||
 	    (!pgpath && !m->queue_if_no_path))
@@ -1093,8 +1100,15 @@ static void activate_path(struct work_struct *work)
 	int ret;
 	struct multipath *m =
 		container_of(work, struct multipath, activate_path);
-	struct dm_path *path = &m->current_pgpath->path;
+	struct dm_path *path;
+	unsigned long flags;
 
+	spin_lock_irqsave(&m->lock, flags);
+	path = &m->pgpath_to_activate->path;
+	m->pgpath_to_activate = NULL;
+	spin_unlock_irqrestore(&m->lock, flags);
+	if (!path)
+		return;
 	ret = scsi_dh_activate(bdev_get_queue(path->dev->bdev));
 	pg_init_done(path, ret);
 }
-- 
cgit v1.2.3


From d6478fad430e37148b56f642c87301ba72476675 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 1 Oct 2008 13:47:06 +0100
Subject: MN10300: Fix IRQ handling

Fix the IRQ handling on the MN10300 arch.

This patch makes a number of significant changes:

 (1) It separates the irq_chip definition for edge-triggered interrupts from
     the one for level-triggered interrupts.

     This is necessary because the MN10300 PIC latches the IRQ channel's
     interrupt request bit (GxICR_REQUEST), even after the device has ceased to
     assert its interrupt line and the interrupt channel has been disabled in
     the PIC.  So for level-triggered interrupts we need to clear this bit when
     we re-enable - which is achieved by setting GxICR_DETECT but not
     GxICR_REQUEST when writing to the register.

     Not doing this results in spurious interrupts occurring because calling
     mask_ack() at the start of handle_level_irq() is insufficient - it fails
     to clear the REQUEST latch because the device that caused the interrupt is
     still asserting its interrupt line at this point.

 (2) IRQ disablement [irq_chip::disable_irq()] shouldn't clear the interrupt
     request flag for edge-triggered interrupts lest it lose an interrupt.

 (3) IRQ unmasking [irq_chip::unmask_irq()] also shouldn't clear the interrupt
     request flag for edge-triggered interrupts lest it lose an interrupt.

 (4) The end() operation is now left to the default (no-operation) as
     __do_IRQ() is compiled out.  This may affect misrouted_irq(), but
     according to Thomas Gleixner it's the correct thing to do.

 (5) handle_level_irq() is used for edge-triggered interrupts rather than
     handle_edge_irq() as the MN10300 PIC latches interrupt events even on
     masked IRQ channels, thus rendering IRQ_PENDING unnecessary.  It is
     sufficient to call mask_ack() at the start and unmask() at the end.

 (6) For level-triggered interrupts, ack() is now NULL as it's not used, and
     there is no effective ACK function on the PIC.  mask_ack() is now the
     same as mask() as the latch continues to latch, even when the channel is
     masked.

Further, the patch discards the disable() op implementation as its now the same
as the mask() op implementation, which is used instead.

It also discards the enable() op implementations as they're now the same as
the unmask() op implementations, which are used instead.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/kernel/irq.c             | 71 ++++++++++++++++++++++-------------
 arch/mn10300/unit-asb2303/unit-init.c |  2 +-
 arch/mn10300/unit-asb2305/unit-init.c |  2 +-
 3 files changed, 47 insertions(+), 28 deletions(-)

diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c
index 761c434a2488..56c64ccc9c21 100644
--- a/arch/mn10300/kernel/irq.c
+++ b/arch/mn10300/kernel/irq.c
@@ -20,22 +20,8 @@ EXPORT_SYMBOL(__mn10300_irq_enabled_epsw);
 atomic_t irq_err_count;
 
 /*
- * MN10300 INTC controller operations
+ * MN10300 interrupt controller operations
  */
-static void mn10300_cpupic_disable(unsigned int irq)
-{
-	u16 tmp = GxICR(irq);
-	GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT;
-	tmp = GxICR(irq);
-}
-
-static void mn10300_cpupic_enable(unsigned int irq)
-{
-	u16 tmp = GxICR(irq);
-	GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
-	tmp = GxICR(irq);
-}
-
 static void mn10300_cpupic_ack(unsigned int irq)
 {
 	u16 tmp;
@@ -60,26 +46,54 @@ static void mn10300_cpupic_mask_ack(unsigned int irq)
 static void mn10300_cpupic_unmask(unsigned int irq)
 {
 	u16 tmp = GxICR(irq);
-	GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT;
+	GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
 	tmp = GxICR(irq);
 }
 
-static void mn10300_cpupic_end(unsigned int irq)
+static void mn10300_cpupic_unmask_clear(unsigned int irq)
 {
+	/* the MN10300 PIC latches its interrupt request bit, even after the
+	 * device has ceased to assert its interrupt line and the interrupt
+	 * channel has been disabled in the PIC, so for level-triggered
+	 * interrupts we need to clear the request bit when we re-enable */
 	u16 tmp = GxICR(irq);
-	GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
+	GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT;
 	tmp = GxICR(irq);
 }
 
-static struct irq_chip mn10300_cpu_pic = {
-	.name		= "cpu",
-	.disable	= mn10300_cpupic_disable,
-	.enable		= mn10300_cpupic_enable,
+/*
+ * MN10300 PIC level-triggered IRQ handling.
+ *
+ * The PIC has no 'ACK' function per se.  It is possible to clear individual
+ * channel latches, but each latch relatches whether or not the channel is
+ * masked, so we need to clear the latch when we unmask the channel.
+ *
+ * Also for this reason, we don't supply an ack() op (it's unused anyway if
+ * mask_ack() is provided), and mask_ack() just masks.
+ */
+static struct irq_chip mn10300_cpu_pic_level = {
+	.name		= "cpu_l",
+	.disable	= mn10300_cpupic_mask,
+	.enable		= mn10300_cpupic_unmask_clear,
+	.ack		= NULL,
+	.mask		= mn10300_cpupic_mask,
+	.mask_ack	= mn10300_cpupic_mask,
+	.unmask		= mn10300_cpupic_unmask_clear,
+};
+
+/*
+ * MN10300 PIC edge-triggered IRQ handling.
+ *
+ * We use the latch clearing function of the PIC as the 'ACK' function.
+ */
+static struct irq_chip mn10300_cpu_pic_edge = {
+	.name		= "cpu_e",
+	.disable	= mn10300_cpupic_mask,
+	.enable		= mn10300_cpupic_unmask,
 	.ack		= mn10300_cpupic_ack,
 	.mask		= mn10300_cpupic_mask,
 	.mask_ack	= mn10300_cpupic_mask_ack,
 	.unmask		= mn10300_cpupic_unmask,
-	.end		= mn10300_cpupic_end,
 };
 
 /*
@@ -114,7 +128,8 @@ void set_intr_level(int irq, u16 level)
  */
 void set_intr_postackable(int irq)
 {
-	set_irq_handler(irq, handle_level_irq);
+	set_irq_chip_and_handler(irq, &mn10300_cpu_pic_level,
+				 handle_level_irq);
 }
 
 /*
@@ -126,8 +141,12 @@ void __init init_IRQ(void)
 
 	for (irq = 0; irq < NR_IRQS; irq++)
 		if (irq_desc[irq].chip == &no_irq_type)
-			set_irq_chip_and_handler(irq, &mn10300_cpu_pic,
-						 handle_edge_irq);
+			/* due to the PIC latching interrupt requests, even
+			 * when the IRQ is disabled, IRQ_PENDING is superfluous
+			 * and we can use handle_level_irq() for edge-triggered
+			 * interrupts */
+			set_irq_chip_and_handler(irq, &mn10300_cpu_pic_edge,
+						 handle_level_irq);
 	unit_init_IRQ();
 }
 
diff --git a/arch/mn10300/unit-asb2303/unit-init.c b/arch/mn10300/unit-asb2303/unit-init.c
index 14b2c817cff8..70e8cb4ea266 100644
--- a/arch/mn10300/unit-asb2303/unit-init.c
+++ b/arch/mn10300/unit-asb2303/unit-init.c
@@ -51,7 +51,7 @@ void __init unit_init_IRQ(void)
 		switch (GET_XIRQ_TRIGGER(extnum)) {
 		case XIRQ_TRIGGER_HILEVEL:
 		case XIRQ_TRIGGER_LOWLEVEL:
-			set_irq_handler(XIRQ2IRQ(extnum), handle_level_irq);
+			set_intr_postackable(XIRQ2IRQ(extnum));
 			break;
 		default:
 			break;
diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c
index 6a352414a358..72812a9439ac 100644
--- a/arch/mn10300/unit-asb2305/unit-init.c
+++ b/arch/mn10300/unit-asb2305/unit-init.c
@@ -52,7 +52,7 @@ void __init unit_init_IRQ(void)
 		switch (GET_XIRQ_TRIGGER(extnum)) {
 		case XIRQ_TRIGGER_HILEVEL:
 		case XIRQ_TRIGGER_LOWLEVEL:
-			set_irq_handler(XIRQ2IRQ(extnum), handle_level_irq);
+			set_intr_postackable(XIRQ2IRQ(extnum));
 			break;
 		default:
 			break;
-- 
cgit v1.2.3


From 20b918dc77b383e9779dafceee3f2198a6f7b0e5 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Wed, 1 Oct 2008 10:39:24 -0700
Subject: pxa2xx_spi: fix build breakage

This patch fixes a build error in the pxa2xx-spi driver,
introduced by commit 7e96445533ac3f4f7964646a202ff3620602fab4
("pxa2xx_spi: dma bugfixes")

  CC      drivers/spi/pxa2xx_spi.o
drivers/spi/pxa2xx_spi.c: In function 'map_dma_buffers':
drivers/spi/pxa2xx_spi.c:331: error: invalid operands to binary &
drivers/spi/pxa2xx_spi.c:331: error: invalid operands to binary &
drivers/spi/pxa2xx_spi.c: In function 'pump_transfers':
drivers/spi/pxa2xx_spi.c:897: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int'

[dbrownell@users.sourceforge.net: fix warning too ]

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/spi/pxa2xx_spi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 0e53354c1cfe..d47d3636227f 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -49,7 +49,7 @@ MODULE_ALIAS("platform:pxa2xx-spi");
 
 #define DMA_INT_MASK		(DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
 #define RESET_DMA_CHANNEL	(DCSR_NODESC | DMA_INT_MASK)
-#define IS_DMA_ALIGNED(x)	(((x) & 0x07) == 0)
+#define IS_DMA_ALIGNED(x)	((((u32)(x)) & 0x07) == 0)
 #define MAX_DMA_LEN		8191
 
 /*
@@ -896,7 +896,7 @@ static void pump_transfers(unsigned long data)
 				|| transfer->rx_dma || transfer->tx_dma) {
 			dev_err(&drv_data->pdev->dev,
 				"pump_transfers: mapped transfer length "
-				"of %lu is greater than %d\n",
+				"of %u is greater than %d\n",
 				transfer->len, MAX_DMA_LEN);
 			message->status = -EINVAL;
 			giveback(drv_data);
-- 
cgit v1.2.3


From 4a7703582836f55a1cbad0e2c1c6ebbee3f9b3a7 Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Wed, 1 Oct 2008 17:18:35 -0700
Subject: e1000e: write protect ICHx NVM to prevent malicious write/erase

Set the hardware to ignore all write/erase cycles to the GbE region in
the ICHx NVM.  This feature can be disabled by the WriteProtectNVM module
parameter (enabled by default) only after a hardware reset, but
the machine must be power cycled before trying to enable writes.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: arjan@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/net/e1000e/e1000.h   |  2 ++
 drivers/net/e1000e/ethtool.c |  3 +++
 drivers/net/e1000e/ich8lan.c | 58 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/e1000e/netdev.c  | 10 +++++---
 drivers/net/e1000e/param.c   | 30 +++++++++++++++++++++++
 5 files changed, 100 insertions(+), 3 deletions(-)

diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index ac4e506b4f88..f0c48a2a6799 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -305,6 +305,7 @@ struct e1000_info {
 #define FLAG_HAS_CTRLEXT_ON_LOAD          (1 << 5)
 #define FLAG_HAS_SWSM_ON_LOAD             (1 << 6)
 #define FLAG_HAS_JUMBO_FRAMES             (1 << 7)
+#define FLAG_READ_ONLY_NVM                (1 << 8)
 #define FLAG_IS_ICH                       (1 << 9)
 #define FLAG_HAS_SMART_POWER_DOWN         (1 << 11)
 #define FLAG_IS_QUAD_PORT_A               (1 << 12)
@@ -385,6 +386,7 @@ extern bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw);
 extern bool e1000e_get_laa_state_82571(struct e1000_hw *hw);
 extern void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state);
 
+extern void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw);
 extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
 						 bool state);
 extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index e21c9e0f3738..5ed8e13d5fed 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -529,6 +529,9 @@ static int e1000_set_eeprom(struct net_device *netdev,
 	if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16)))
 		return -EFAULT;
 
+	if (adapter->flags & FLAG_READ_ONLY_NVM)
+		return -EINVAL;
+
 	max_len = hw->nvm.word_size * 2;
 
 	first_word = eeprom->offset >> 1;
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 9e38452a738c..d8efba884134 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -58,6 +58,7 @@
 #define ICH_FLASH_HSFCTL		0x0006
 #define ICH_FLASH_FADDR			0x0008
 #define ICH_FLASH_FDATA0		0x0010
+#define ICH_FLASH_PR0			0x0074
 
 #define ICH_FLASH_READ_COMMAND_TIMEOUT	500
 #define ICH_FLASH_WRITE_COMMAND_TIMEOUT	500
@@ -150,6 +151,19 @@ union ich8_hws_flash_regacc {
 	u16 regval;
 };
 
+/* ICH Flash Protected Region */
+union ich8_flash_protected_range {
+	struct ich8_pr {
+		u32 base:13;     /* 0:12 Protected Range Base */
+		u32 reserved1:2; /* 13:14 Reserved */
+		u32 rpe:1;       /* 15 Read Protection Enable */
+		u32 limit:13;    /* 16:28 Protected Range Limit */
+		u32 reserved2:2; /* 29:30 Reserved */
+		u32 wpe:1;       /* 31 Write Protection Enable */
+	} range;
+	u32 regval;
+};
+
 static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw);
 static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw);
 static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw);
@@ -1284,6 +1298,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	 * programming failed.
 	 */
 	if (ret_val) {
+		/* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */
 		hw_dbg(hw, "Flash commit failed.\n");
 		e1000_release_swflag_ich8lan(hw);
 		return ret_val;
@@ -1373,6 +1388,49 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	return e1000e_validate_nvm_checksum_generic(hw);
 }
 
+/**
+ *  e1000e_write_protect_nvm_ich8lan - Make the NVM read-only
+ *  @hw: pointer to the HW structure
+ *
+ *  To prevent malicious write/erase of the NVM, set it to be read-only
+ *  so that the hardware ignores all write/erase cycles of the NVM via
+ *  the flash control registers.  The shadow-ram copy of the NVM will
+ *  still be updated, however any updates to this copy will not stick
+ *  across driver reloads.
+ **/
+void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw)
+{
+	union ich8_flash_protected_range pr0;
+	union ich8_hws_flash_status hsfsts;
+	u32 gfpreg;
+	s32 ret_val;
+
+	ret_val = e1000_acquire_swflag_ich8lan(hw);
+	if (ret_val)
+		return;
+
+	gfpreg = er32flash(ICH_FLASH_GFPREG);
+
+	/* Write-protect GbE Sector of NVM */
+	pr0.regval = er32flash(ICH_FLASH_PR0);
+	pr0.range.base = gfpreg & FLASH_GFPREG_BASE_MASK;
+	pr0.range.limit = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK);
+	pr0.range.wpe = true;
+	ew32flash(ICH_FLASH_PR0, pr0.regval);
+
+	/*
+	 * Lock down a subset of GbE Flash Control Registers, e.g.
+	 * PR0 to prevent the write-protection from being lifted.
+	 * Once FLOCKDN is set, the registers protected by it cannot
+	 * be written until FLOCKDN is cleared by a hardware reset.
+	 */
+	hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+	hsfsts.hsf_status.flockdn = true;
+	ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval);
+
+	e1000_release_swflag_ich8lan(hw);
+}
+
 /**
  *  e1000_write_flash_data_ich8lan - Writes bytes to the NVM
  *  @hw: pointer to the HW structure
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index d266510c8a94..1f767feda9a7 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -47,7 +47,7 @@
 
 #include "e1000.h"
 
-#define DRV_VERSION "0.3.3.3-k2"
+#define DRV_VERSION "0.3.3.3-k4"
 char e1000e_driver_name[] = "e1000e";
 const char e1000e_driver_version[] = DRV_VERSION;
 
@@ -4467,6 +4467,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 
 	adapter->bd_number = cards_found++;
 
+	e1000e_check_options(adapter);
+
 	/* setup adapter struct */
 	err = e1000_sw_init(adapter);
 	if (err)
@@ -4482,6 +4484,10 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	if (err)
 		goto err_hw_init;
 
+	if ((adapter->flags & FLAG_IS_ICH) &&
+	    (adapter->flags & FLAG_READ_ONLY_NVM))
+		e1000e_write_protect_nvm_ich8lan(&adapter->hw);
+
 	hw->mac.ops.get_bus_info(&adapter->hw);
 
 	adapter->hw.phy.autoneg_wait_to_complete = 0;
@@ -4573,8 +4579,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	INIT_WORK(&adapter->reset_task, e1000_reset_task);
 	INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
 
-	e1000e_check_options(adapter);
-
 	/* Initialize link parameters. User can change them with ethtool */
 	adapter->hw.mac.autoneg = 1;
 	adapter->fc_autoneg = 1;
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index ed912e023a72..d91dbf7ba434 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -133,6 +133,15 @@ E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
  */
 E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
 
+/*
+ * Write Protect NVM
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");
+
 struct e1000_option {
 	enum { enable_option, range_option, list_option } type;
 	const char *name;
@@ -388,4 +397,25 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
 								       opt.def);
 		}
 	}
+	{ /* Write-protect NVM */
+		const struct e1000_option opt = {
+			.type = enable_option,
+			.name = "Write-protect NVM",
+			.err  = "defaulting to Enabled",
+			.def  = OPTION_ENABLED
+		};
+
+		if (adapter->flags & FLAG_IS_ICH) {
+			if (num_WriteProtectNVM > bd) {
+				unsigned int write_protect_nvm = WriteProtectNVM[bd];
+				e1000_validate_option(&write_protect_nvm, &opt,
+						      adapter);
+				if (write_protect_nvm)
+					adapter->flags |= FLAG_READ_ONLY_NVM;
+			} else {
+				if (opt.def)
+					adapter->flags |= FLAG_READ_ONLY_NVM;
+			}
+		}
+	}
 }
-- 
cgit v1.2.3


From 1fce2d01dff65a76cd08c1b145acd9d3c20021d2 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Thu, 2 Oct 2008 00:58:49 -0500
Subject: powerpc: Fix boot hang regression on MPC8544DS

Commit 00c5372d37a78990c1530184a9c792ee60a30067 caused the MPC8544DS
board to hang at boot.  The MPC8544DS is unique in that it doesn't use
the PCI slots on the ULI (unlike the MPC8572DS or MPC8610HPCD).  So
the dummy read at the end of the address space causes us to hang.

We can detect the situation by comparing the bridge's BARs versus
the root complex.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/fsl_uli1575.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index ef74a0763ec1..8c619963becc 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -219,11 +219,21 @@ static void __devinit quirk_final_uli5249(struct pci_dev *dev)
 	int i;
 	u8 *dummy;
 	struct pci_bus *bus = dev->bus;
+	resource_size_t end = 0;
+
+	for (i = PCI_BRIDGE_RESOURCES; i < PCI_BRIDGE_RESOURCES+3; i++) {
+		unsigned long flags = pci_resource_flags(dev, i);
+		if ((flags & (IORESOURCE_MEM|IORESOURCE_PREFETCH)) == IORESOURCE_MEM)
+			end = pci_resource_end(dev, i);
+	}
 
 	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
 		if ((bus->resource[i]) &&
 			(bus->resource[i]->flags & IORESOURCE_MEM)) {
-			dummy = ioremap(bus->resource[i]->end - 3, 0x4);
+			if (bus->resource[i]->end == end)
+				dummy = ioremap(bus->resource[i]->start, 0x4);
+			else
+				dummy = ioremap(bus->resource[i]->end - 3, 0x4);
 			if (dummy) {
 				in_8(dummy);
 				iounmap(dummy);
-- 
cgit v1.2.3


From 4037314afc6eea3eab7e0447884c12b57a081f63 Mon Sep 17 00:00:00 2001
From: Rob Sims <openmoko-z@robsims.com>
Date: Wed, 1 Oct 2008 21:47:31 +0200
Subject: ASoC: Set correct name for WM8753 rec mixer output

Rob Sims wrote:

"I can't seem to turn on register 0x17, bit 3 in the sound chip, except
by codec_reg_write; the mixer lacks direct or indirect control.  It
seems there are two names for the output of the rec mixer:
Capture ST Mixer
Playback Mixer

Would the following do the trick?"

I confirm that this solves the audio problems I was having.

Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/soc/codecs/wm8753.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index 5761164fe16d..e873414840c8 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -583,7 +583,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
 
 	/* out 4 */
 	{"Out4 Mux", "VREF", "VREF"},
-	{"Out4 Mux", "Capture ST", "Capture ST Mixer"},
+	{"Out4 Mux", "Capture ST", "Playback Mixer"},
 	{"Out4 Mux", "LOUT2", "LOUT2"},
 	{"Out 4", NULL, "Out4 Mux"},
 	{"OUT4", NULL, "Out 4"},
@@ -607,7 +607,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
 	/* Capture Right Mux */
 	{"Capture Right Mux", "PGA", "Right Capture Volume"},
 	{"Capture Right Mux", "Line or RXP-RXN", "Line Right Mux"},
-	{"Capture Right Mux", "Sidetone", "Capture ST Mixer"},
+	{"Capture Right Mux", "Sidetone", "Playback Mixer"},
 
 	/* Mono Capture mixer-mux */
 	{"Capture Right Mixer", "Stereo", "Capture Right Mux"},
-- 
cgit v1.2.3


From 4dbf95ba6c344186ec6d38ff514dc675da464bec Mon Sep 17 00:00:00 2001
From: Risto Suominen <Risto.Suominen@gmail.com>
Date: Mon, 25 Aug 2008 08:02:12 +0200
Subject: ALSA: snd-powermac: mixers for PowerMac G4 AGP

Add mixer controls for PowerMac G4 AGP (Screamer).

This patch fixes the regression in the recent snd-powermac which
doesn't support some G3/G4 PowerMacs:
    http://lkml.org/lkml/2008/10/1/220

Signed-off-by: Risto Suominen <Risto.Suominen@gmail.com>
Tested-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/ppc/awacs.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/sound/ppc/awacs.c b/sound/ppc/awacs.c
index 566a6d0daf4a..543d4f1784a5 100644
--- a/sound/ppc/awacs.c
+++ b/sound/ppc/awacs.c
@@ -621,6 +621,13 @@ static struct snd_kcontrol_new snd_pmac_screamer_mixers_imac[] __initdata = {
 	AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0),
 };
 
+static struct snd_kcontrol_new snd_pmac_screamer_mixers_g4agp[] __initdata = {
+	AWACS_VOLUME("Line out Playback Volume", 2, 6, 1),
+	AWACS_VOLUME("Master Playback Volume", 5, 6, 1),
+	AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0),
+	AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0),
+};
+
 static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac7500[] __initdata = {
 	AWACS_VOLUME("Line out Playback Volume", 2, 6, 1),
 	AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0),
@@ -768,6 +775,7 @@ static void snd_pmac_awacs_resume(struct snd_pmac *chip)
 #define IS_IMAC (machine_is_compatible("PowerMac2,1") \
 		|| machine_is_compatible("PowerMac2,2") \
 		|| machine_is_compatible("PowerMac4,1"))
+#define IS_G4AGP (machine_is_compatible("PowerMac3,1"))
 
 static int imac;
 
@@ -850,6 +858,7 @@ snd_pmac_awacs_init(struct snd_pmac *chip)
 {
 	int pm7500 = IS_PM7500;
 	int beige = IS_BEIGE;
+	int g4agp = IS_G4AGP;
 	int err, vol;
 
 	imac = IS_IMAC;
@@ -939,7 +948,7 @@ snd_pmac_awacs_init(struct snd_pmac *chip)
 				snd_pmac_awacs_mixers);
 	if (err < 0)
 		return err;
-	if (beige)
+	if (beige || g4agp)
 		;
 	else if (chip->model == PMAC_SCREAMER)
 		err = build_mixers(chip, ARRAY_SIZE(snd_pmac_screamer_mixers2),
@@ -961,13 +970,17 @@ snd_pmac_awacs_init(struct snd_pmac *chip)
 		err = build_mixers(chip,
 				   ARRAY_SIZE(snd_pmac_screamer_mixers_imac),
 				   snd_pmac_screamer_mixers_imac);
+	else if (g4agp)
+		err = build_mixers(chip,
+				   ARRAY_SIZE(snd_pmac_screamer_mixers_g4agp),
+				   snd_pmac_screamer_mixers_g4agp);
 	else
 		err = build_mixers(chip,
 				   ARRAY_SIZE(snd_pmac_awacs_mixers_pmac),
 				   snd_pmac_awacs_mixers_pmac);
 	if (err < 0)
 		return err;
-	chip->master_sw_ctl = snd_ctl_new1((pm7500 || imac)
+	chip->master_sw_ctl = snd_ctl_new1((pm7500 || imac || g4agp)
 			? &snd_pmac_awacs_master_sw_imac
 			: &snd_pmac_awacs_master_sw, chip);
 	err = snd_ctl_add(chip->card, chip->master_sw_ctl);
@@ -1012,7 +1025,7 @@ snd_pmac_awacs_init(struct snd_pmac *chip)
 			return err;
 	}
 
-	if (beige)
+	if (beige || g4agp)
 		err = build_mixers(chip,
 				ARRAY_SIZE(snd_pmac_screamer_mic_boost_beige),
 				snd_pmac_screamer_mic_boost_beige);
-- 
cgit v1.2.3


From 030b655b062fe5190fc490e0091ea50307d7a86f Mon Sep 17 00:00:00 2001
From: Risto Suominen <Risto.Suominen@gmail.com>
Date: Mon, 25 Aug 2008 08:04:23 +0200
Subject: ALSA: snd-powermac: HP detection for 1st iMac G3 SL

Correct headphone detection for 1st generation iMac G3 Slot-loading (Screamer).

This patch fixes the regression in the recent snd-powermac which
doesn't support some G3/G4 PowerMacs:
    http://lkml.org/lkml/2008/10/1/220

Signed-off-by: Risto Suominen <Risto.Suominen@gmail.com>
Tested-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/ppc/awacs.c | 31 ++++++++++++++++++++++---------
 1 file changed, 22 insertions(+), 9 deletions(-)

diff --git a/sound/ppc/awacs.c b/sound/ppc/awacs.c
index 543d4f1784a5..106c48225bba 100644
--- a/sound/ppc/awacs.c
+++ b/sound/ppc/awacs.c
@@ -695,7 +695,10 @@ static struct snd_kcontrol_new snd_pmac_awacs_speaker_vol[] __initdata = {
 static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw __initdata =
 AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_SPKMUTE, 1);
 
-static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac1 __initdata =
+AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_PAROUT1, 1);
+
+static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac2 __initdata =
 AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_PAROUT1, 0);
 
 
@@ -772,12 +775,12 @@ static void snd_pmac_awacs_resume(struct snd_pmac *chip)
 
 #define IS_PM7500 (machine_is_compatible("AAPL,7500"))
 #define IS_BEIGE (machine_is_compatible("AAPL,Gossamer"))
-#define IS_IMAC (machine_is_compatible("PowerMac2,1") \
-		|| machine_is_compatible("PowerMac2,2") \
+#define IS_IMAC1 (machine_is_compatible("PowerMac2,1"))
+#define IS_IMAC2 (machine_is_compatible("PowerMac2,2") \
 		|| machine_is_compatible("PowerMac4,1"))
 #define IS_G4AGP (machine_is_compatible("PowerMac3,1"))
 
-static int imac;
+static int imac1, imac2;
 
 #ifdef PMAC_SUPPORT_AUTOMUTE
 /*
@@ -823,13 +826,18 @@ static void snd_pmac_awacs_update_automute(struct snd_pmac *chip, int do_notify)
 		{
 			int reg = chip->awacs_reg[1]
 				| (MASK_HDMUTE | MASK_SPKMUTE);
-			if (imac) {
+			if (imac1) {
+				reg &= ~MASK_SPKMUTE;
+				reg |= MASK_PAROUT1;
+			} else if (imac2) {
 				reg &= ~MASK_SPKMUTE;
 				reg &= ~MASK_PAROUT1;
 			}
 			if (snd_pmac_awacs_detect_headphone(chip))
 				reg &= ~MASK_HDMUTE;
-			else if (imac)
+			else if (imac1)
+				reg &= ~MASK_PAROUT1;
+			else if (imac2)
 				reg |= MASK_PAROUT1;
 			else
 				reg &= ~MASK_SPKMUTE;
@@ -859,9 +867,12 @@ snd_pmac_awacs_init(struct snd_pmac *chip)
 	int pm7500 = IS_PM7500;
 	int beige = IS_BEIGE;
 	int g4agp = IS_G4AGP;
+	int imac;
 	int err, vol;
 
-	imac = IS_IMAC;
+	imac1 = IS_IMAC1;
+	imac2 = IS_IMAC2;
+	imac = imac1 || imac2;
 	/* looks like MASK_GAINLINE triggers something, so we set here
 	 * as start-up
 	 */
@@ -1017,8 +1028,10 @@ snd_pmac_awacs_init(struct snd_pmac *chip)
 					snd_pmac_awacs_speaker_vol);
 		if (err < 0)
 			return err;
-		chip->speaker_sw_ctl = snd_ctl_new1(imac
-				? &snd_pmac_awacs_speaker_sw_imac
+		chip->speaker_sw_ctl = snd_ctl_new1(imac1
+				? &snd_pmac_awacs_speaker_sw_imac1
+				: imac2
+				? &snd_pmac_awacs_speaker_sw_imac2
 				: &snd_pmac_awacs_speaker_sw, chip);
 		err = snd_ctl_add(chip->card, chip->speaker_sw_ctl);
 		if (err < 0)
-- 
cgit v1.2.3


From 08650869e0ec581f8d88cfdb563d37f5383abfe2 Mon Sep 17 00:00:00 2001
From: David Winn <q-newsgroup@qypea.com>
Date: Thu, 2 Oct 2008 14:50:11 -0700
Subject: fbcon: fix monochrome color value calculation

Commit 22af89aa0c0b4012a7431114a340efd3665a7617 ("fbcon: replace mono_col
macro with static inline") changed the order of operations for computing
monochrome color values.  This generates 0xffff000f instead of 0x0000000f
for a 4 bit monochrome color, leading to image corruption if it is passed
to cfb_imageblit or other similar functions.  Fix it up.

Cc: Harvey Harrison <harvey.harrison@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: <stable@kernel.org>		[2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/console/fbcon.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/console/fbcon.h b/drivers/video/console/fbcon.h
index a6e38e9ea73f..89a346880ec0 100644
--- a/drivers/video/console/fbcon.h
+++ b/drivers/video/console/fbcon.h
@@ -110,7 +110,7 @@ static inline int mono_col(const struct fb_info *info)
 	__u32 max_len;
 	max_len = max(info->var.green.length, info->var.red.length);
 	max_len = max(info->var.blue.length, max_len);
-	return ~(0xfff << (max_len & 0xff));
+	return (~(0xfff << max_len)) & 0xff;
 }
 
 static inline int attr_col_ec(int shift, struct vc_data *vc,
-- 
cgit v1.2.3


From 16dbc6c9616363fe53811abcbd935336dc0a0f01 Mon Sep 17 00:00:00 2001
From: Nick Piggin <nickpiggin@yahoo.com.au>
Date: Thu, 2 Oct 2008 14:50:12 -0700
Subject: inotify: fix lock ordering wrt do_page_fault's mmap_sem

Fix inotify lock order reversal with mmap_sem due to holding locks over
copy_to_user.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Reported-by: "Daniel J Blueman" <daniel.blueman@gmail.com>
Tested-by: "Daniel J Blueman" <daniel.blueman@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/inotify_user.c            | 27 ++++++++++++++++++++-------
 include/asm-x86/uaccess_64.h |  1 +
 2 files changed, 21 insertions(+), 7 deletions(-)

diff --git a/fs/inotify_user.c b/fs/inotify_user.c
index 60249429a253..d85c7d931cdf 100644
--- a/fs/inotify_user.c
+++ b/fs/inotify_user.c
@@ -323,7 +323,7 @@ out:
 }
 
 /*
- * remove_kevent - cleans up and ultimately frees the given kevent
+ * remove_kevent - cleans up the given kevent
  *
  * Caller must hold dev->ev_mutex.
  */
@@ -334,7 +334,13 @@ static void remove_kevent(struct inotify_device *dev,
 
 	dev->event_count--;
 	dev->queue_size -= sizeof(struct inotify_event) + kevent->event.len;
+}
 
+/*
+ * free_kevent - frees the given kevent.
+ */
+static void free_kevent(struct inotify_kernel_event *kevent)
+{
 	kfree(kevent->name);
 	kmem_cache_free(event_cachep, kevent);
 }
@@ -350,6 +356,7 @@ static void inotify_dev_event_dequeue(struct inotify_device *dev)
 		struct inotify_kernel_event *kevent;
 		kevent = inotify_dev_get_event(dev);
 		remove_kevent(dev, kevent);
+		free_kevent(kevent);
 	}
 }
 
@@ -433,17 +440,15 @@ static ssize_t inotify_read(struct file *file, char __user *buf,
 	dev = file->private_data;
 
 	while (1) {
-		int events;
 
 		prepare_to_wait(&dev->wq, &wait, TASK_INTERRUPTIBLE);
 
 		mutex_lock(&dev->ev_mutex);
-		events = !list_empty(&dev->events);
-		mutex_unlock(&dev->ev_mutex);
-		if (events) {
+		if (!list_empty(&dev->events)) {
 			ret = 0;
 			break;
 		}
+		mutex_unlock(&dev->ev_mutex);
 
 		if (file->f_flags & O_NONBLOCK) {
 			ret = -EAGAIN;
@@ -462,7 +467,6 @@ static ssize_t inotify_read(struct file *file, char __user *buf,
 	if (ret)
 		return ret;
 
-	mutex_lock(&dev->ev_mutex);
 	while (1) {
 		struct inotify_kernel_event *kevent;
 
@@ -481,6 +485,13 @@ static ssize_t inotify_read(struct file *file, char __user *buf,
 			}
 			break;
 		}
+		remove_kevent(dev, kevent);
+
+		/*
+		 * Must perform the copy_to_user outside the mutex in order
+		 * to avoid a lock order reversal with mmap_sem.
+		 */
+		mutex_unlock(&dev->ev_mutex);
 
 		if (copy_to_user(buf, &kevent->event, event_size)) {
 			ret = -EFAULT;
@@ -498,7 +509,9 @@ static ssize_t inotify_read(struct file *file, char __user *buf,
 			count -= kevent->event.len;
 		}
 
-		remove_kevent(dev, kevent);
+		free_kevent(kevent);
+
+		mutex_lock(&dev->ev_mutex);
 	}
 	mutex_unlock(&dev->ev_mutex);
 
diff --git a/include/asm-x86/uaccess_64.h b/include/asm-x86/uaccess_64.h
index 515d4dce96b5..45806d60bcbe 100644
--- a/include/asm-x86/uaccess_64.h
+++ b/include/asm-x86/uaccess_64.h
@@ -7,6 +7,7 @@
 #include <linux/compiler.h>
 #include <linux/errno.h>
 #include <linux/prefetch.h>
+#include <linux/lockdep.h>
 #include <asm/page.h>
 
 /*
-- 
cgit v1.2.3


From c0c9209ddd96bc4f1d70a8b9958710671e076080 Mon Sep 17 00:00:00 2001
From: Pascal Terjan <pterjan@mandriva.com>
Date: Thu, 2 Oct 2008 14:50:13 -0700
Subject: braille_console: only register notifiers when the braille console is
 used

Only register the braille driver VT and keyboard notifiers when the
braille console is used.  Avoids eating insert or backspace keys.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11242

Signed-off-by: Pascal Terjan <pterjan@mandriva.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/accessibility/braille/braille_console.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/accessibility/braille/braille_console.c b/drivers/accessibility/braille/braille_console.c
index 0a5f6b2114c5..d672cfe7ca59 100644
--- a/drivers/accessibility/braille/braille_console.c
+++ b/drivers/accessibility/braille/braille_console.c
@@ -376,6 +376,8 @@ int braille_register_console(struct console *console, int index,
 	console->flags |= CON_ENABLED;
 	console->index = index;
 	braille_co = console;
+	register_keyboard_notifier(&keyboard_notifier_block);
+	register_vt_notifier(&vt_notifier_block);
 	return 0;
 }
 
@@ -383,15 +385,8 @@ int braille_unregister_console(struct console *console)
 {
 	if (braille_co != console)
 		return -EINVAL;
+	unregister_keyboard_notifier(&keyboard_notifier_block);
+	unregister_vt_notifier(&vt_notifier_block);
 	braille_co = NULL;
 	return 0;
 }
-
-static int __init braille_init(void)
-{
-	register_keyboard_notifier(&keyboard_notifier_block);
-	register_vt_notifier(&vt_notifier_block);
-	return 0;
-}
-
-console_initcall(braille_init);
-- 
cgit v1.2.3


From aa94fbd5ccd840c8ab26d02439ec799b03a72547 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Thu, 2 Oct 2008 14:50:14 -0700
Subject: fix error-path NULL deref in alloc_posix_timer()

Found by static checker (http://repo.or.cz/w/smatch.git).

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/posix-timers.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index e36d5798cbff..5131e5471169 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -441,7 +441,7 @@ static struct k_itimer * alloc_posix_timer(void)
 		return tmr;
 	if (unlikely(!(tmr->sigq = sigqueue_alloc()))) {
 		kmem_cache_free(posix_timers_cache, tmr);
-		tmr = NULL;
+		return NULL;
 	}
 	memset(&tmr->sigq->info, 0, sizeof(siginfo_t));
 	return tmr;
-- 
cgit v1.2.3


From 6c1b7f680dd4f550fa6f91f148cc6fa2c4bd0737 Mon Sep 17 00:00:00 2001
From: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Date: Thu, 2 Oct 2008 14:50:16 -0700
Subject: memory hotplug: missing zone->lock in test_pages_isolated()

__test_page_isolated_in_pageblock() in mm/page_isolation.c has a comment
saying that the caller must hold zone->lock. But the only caller of that
function, test_pages_isolated(), does not hold zone->lock and the lock is
also not acquired anywhere before. This patch adds the missing zone->lock
to test_pages_isolated().

We reproducibly run into BUG_ON(!PageBuddy(page)) in __offline_isolated_pages()
during memory hotplug stress test, see trace below. This patch fixes that
problem, it would be good if we could have it in 2.6.27.

kernel BUG at /home/autobuild/BUILD/linux-2.6.26-20080909/mm/page_alloc.c:4561!
illegal operation: 0001 [#1] PREEMPT SMP
Modules linked in: dm_multipath sunrpc bonding qeth_l3 dm_mod qeth ccwgroup vmur
CPU: 1 Not tainted 2.6.26-29.x.20080909-s390default #1
Process memory_loop_all (pid: 10025, task: 2f444028, ksp: 2b10dd28)
Krnl PSW : 040c0000 801727ea (__offline_isolated_pages+0x18e/0x1c4)
 R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:0 PM:0
Krnl GPRS: 00000000 7e27fc00 00000000 7e27fc00
 00000000 00000400 00014000 7e27fc01
 00606f00 7e27fc00 00013fe0 2b10dd28
 00000005 80172662 801727b2 2b10dd28
Krnl Code: 801727de: 5810900c l %r1,12(%r9)
 801727e2: a7f4ffb3 brc 15,80172748
 801727e6: a7f40001 brc 15,801727e8
 >801727ea: a7f4ffbc brc 15,80172762
 801727ee: a7f40001 brc 15,801727f0
 801727f2: a7f4ffaf brc 15,80172750
 801727f6: 0707 bcr 0,%r7
 801727f8: 0017 unknown
Call Trace:
([<0000000000172772>] __offline_isolated_pages+0x116/0x1c4)
 [<00000000001953a2>] offline_isolated_pages_cb+0x22/0x34
 [<000000000013164c>] walk_memory_resource+0xcc/0x11c
 [<000000000019520e>] offline_pages+0x36a/0x498
 [<00000000001004d6>] remove_memory+0x36/0x44
 [<000000000028fb06>] memory_block_change_state+0x112/0x150
 [<000000000028ffb8>] store_mem_state+0x90/0xe4
 [<0000000000289c00>] sysdev_store+0x34/0x40
 [<00000000001ee048>] sysfs_write_file+0xd0/0x178
 [<000000000019b1a8>] vfs_write+0x74/0x118
 [<000000000019b9ae>] sys_write+0x46/0x7c
 [<000000000011160e>] sysc_do_restart+0x12/0x16
 [<0000000077f3e8ca>] 0x77f3e8ca

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/page_isolation.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/mm/page_isolation.c b/mm/page_isolation.c
index c69f84fe038d..b70a7fec1ff6 100644
--- a/mm/page_isolation.c
+++ b/mm/page_isolation.c
@@ -114,8 +114,10 @@ __test_page_isolated_in_pageblock(unsigned long pfn, unsigned long end_pfn)
 
 int test_pages_isolated(unsigned long start_pfn, unsigned long end_pfn)
 {
-	unsigned long pfn;
+	unsigned long pfn, flags;
 	struct page *page;
+	struct zone *zone;
+	int ret;
 
 	pfn = start_pfn;
 	/*
@@ -131,7 +133,9 @@ int test_pages_isolated(unsigned long start_pfn, unsigned long end_pfn)
 	if (pfn < end_pfn)
 		return -EBUSY;
 	/* Check all pages are free or Marked as ISOLATED */
-	if (__test_page_isolated_in_pageblock(start_pfn, end_pfn))
-		return 0;
-	return -EBUSY;
+	zone = page_zone(pfn_to_page(pfn));
+	spin_lock_irqsave(&zone->lock, flags);
+	ret = __test_page_isolated_in_pageblock(start_pfn, end_pfn);
+	spin_unlock_irqrestore(&zone->lock, flags);
+	return ret ? 0 : -EBUSY;
 }
-- 
cgit v1.2.3


From 4b19de6d1cb07c8bcb6778e771f9cfd5bcfdfd3e Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Thu, 2 Oct 2008 14:50:16 -0700
Subject: mm: tiny-shmem nommu fix

The previous patch db203d53d474aa068984e409d807628f5841da1b ("mm:
tiny-shmem fix lock ordering: mmap_sem vs i_mutex") to fix the lock
ordering in tiny-shmem breaks shared anonymous and IPC memory on NOMMU
architectures because it was using the expanding truncate to signal ramfs
to allocate a physically contiguous RAM backing the inode (otherwise it is
unusable for "memory mapping" it to userspace).

However do_truncate is what caused the lock ordering error, due to it
taking i_mutex.  In this case, we can actually just call ramfs directly to
allocate memory for the mapping, rather than go via truncate.

Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ramfs/file-nommu.c | 2 +-
 include/linux/ramfs.h | 1 +
 mm/tiny-shmem.c       | 6 ++++++
 3 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c
index 52312ec93ff4..5145cb9125af 100644
--- a/fs/ramfs/file-nommu.c
+++ b/fs/ramfs/file-nommu.c
@@ -58,7 +58,7 @@ const struct inode_operations ramfs_file_inode_operations = {
  * size 0 on the assumption that it's going to be used for an mmap of shared
  * memory
  */
-static int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize)
+int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize)
 {
 	struct pagevec lru_pvec;
 	unsigned long npages, xpages, loop, limit;
diff --git a/include/linux/ramfs.h b/include/linux/ramfs.h
index b160fb18e8d6..37aaf2b39863 100644
--- a/include/linux/ramfs.h
+++ b/include/linux/ramfs.h
@@ -6,6 +6,7 @@ extern int ramfs_get_sb(struct file_system_type *fs_type,
 	 int flags, const char *dev_name, void *data, struct vfsmount *mnt);
 
 #ifndef CONFIG_MMU
+extern int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize);
 extern unsigned long ramfs_nommu_get_unmapped_area(struct file *file,
 						   unsigned long addr,
 						   unsigned long len,
diff --git a/mm/tiny-shmem.c b/mm/tiny-shmem.c
index d17cb6f6ab10..8d7a27a6335c 100644
--- a/mm/tiny-shmem.c
+++ b/mm/tiny-shmem.c
@@ -80,6 +80,12 @@ struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags)
 	inode->i_nlink = 0;	/* It is unlinked */
 	init_file(file, shm_mnt, dentry, FMODE_WRITE | FMODE_READ,
 			&ramfs_file_operations);
+
+#ifndef CONFIG_MMU
+	error = ramfs_nommu_expand_for_mapping(inode, size);
+	if (error)
+		goto close_file;
+#endif
 	return file;
 
 close_file:
-- 
cgit v1.2.3


From 6babc32c41e3642d875372cb6afbd9ade7a9f311 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Thu, 2 Oct 2008 14:50:18 -0700
Subject: mm: handle initialising compound pages at orders greater than
 MAX_ORDER

When we initialise a compound page we initialise the page flags and head
page pointer for all base pages spanned by that page.  When we initialise
a gigantic page (a page of order greater than or equal to MAX_ORDER) we
have to initialise more than MAX_ORDER_NR_PAGES pages.  Currently we
assume that all elements of the mem_map in this page are contigious in
memory.  However this is only guarenteed out to MAX_ORDER_NR_PAGES pages,
and with SPARSEMEM enabled they will not be contigious.  This leads us to
walk off the end of the first section and scribble on everything which
follows, BAD.

When we reach a MAX_ORDER_NR_PAGES boundary we much locate the next
section of the mem_map.  As gigantic pages can only be maximally aligned
we know this will occur at exact multiple of MAX_ORDER_NR_PAGES pages from
the start of the page.

This is a bug fix for the gigantic page support in hugetlbfs.

Credit to Mel Gorman for spotting the issue.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/page_alloc.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index e293c58bea58..27b8681139fd 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -268,13 +268,14 @@ void prep_compound_page(struct page *page, unsigned long order)
 {
 	int i;
 	int nr_pages = 1 << order;
+	struct page *p = page + 1;
 
 	set_compound_page_dtor(page, free_compound_page);
 	set_compound_order(page, order);
 	__SetPageHead(page);
-	for (i = 1; i < nr_pages; i++) {
-		struct page *p = page + i;
-
+	for (i = 1; i < nr_pages; i++, p++) {
+		if (unlikely((i & (MAX_ORDER_NR_PAGES - 1)) == 0))
+			p = pfn_to_page(page_to_pfn(page) + i);
 		__SetPageTail(p);
 		p->first_page = page;
 	}
@@ -284,6 +285,7 @@ static void destroy_compound_page(struct page *page, unsigned long order)
 {
 	int i;
 	int nr_pages = 1 << order;
+	struct page *p = page + 1;
 
 	if (unlikely(compound_order(page) != order))
 		bad_page(page);
@@ -291,8 +293,9 @@ static void destroy_compound_page(struct page *page, unsigned long order)
 	if (unlikely(!PageHead(page)))
 			bad_page(page);
 	__ClearPageHead(page);
-	for (i = 1; i < nr_pages; i++) {
-		struct page *p = page + i;
+	for (i = 1; i < nr_pages; i++, p++) {
+		if (unlikely((i & (MAX_ORDER_NR_PAGES - 1)) == 0))
+			p = pfn_to_page(page_to_pfn(page) + i);
 
 		if (unlikely(!PageTail(p) |
 				(p->first_page != page)))
-- 
cgit v1.2.3


From 37f40239f49fbc0b489d0327a700fee5b3898ac2 Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Thu, 2 Oct 2008 16:33:20 -0700
Subject: e1000e: reset swflag after resetting hardware

in the process of debugging things, noticed that the swflag is not reset
by the driver after reset, and the swflag is probably not reset unless
management firmware clears it after 100ms.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/net/e1000e/ich8lan.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index d8efba884134..f4b6744d71df 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1778,6 +1778,9 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	ew32(CTRL, (ctrl | E1000_CTRL_RST));
 	msleep(20);
 
+	/* release the swflag because it is not reset by hardware reset */
+	e1000_release_swflag_ich8lan(hw);
+
 	ret_val = e1000e_get_auto_rd_done(hw);
 	if (ret_val) {
 		/*
-- 
cgit v1.2.3


From a8f88ff5a5abc2ce9f7d7d2694178b2c617d713a Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Thu, 2 Oct 2008 16:33:25 -0700
Subject: e1000e: do not ever sleep in interrupt context

e1000e was apparently calling two functions that attempted to reserve
the SWFLAG bit for exclusive (to hardware and firmware) access to
the PHY and NVM (aka eeprom).  These accesses could possibly call
msleep to wait for the resource which is not allowed from interrupt
context.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/net/e1000e/e1000.h  |  2 ++
 drivers/net/e1000e/netdev.c | 31 ++++++++++++++++++++++++++++---
 2 files changed, 30 insertions(+), 3 deletions(-)

diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index f0c48a2a6799..8087bda97218 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -284,6 +284,8 @@ struct e1000_adapter {
 	unsigned long led_status;
 
 	unsigned int flags;
+	struct work_struct downshift_task;
+	struct work_struct update_phy_task;
 };
 
 struct e1000_info {
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 1f767feda9a7..803545b2fc8c 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1115,6 +1115,14 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
 	writel(0, adapter->hw.hw_addr + rx_ring->tail);
 }
 
+static void e1000e_downshift_workaround(struct work_struct *work)
+{
+	struct e1000_adapter *adapter = container_of(work,
+					struct e1000_adapter, downshift_task);
+
+	e1000e_gig_downshift_workaround_ich8lan(&adapter->hw);
+}
+
 /**
  * e1000_intr_msi - Interrupt Handler
  * @irq: interrupt number
@@ -1139,7 +1147,7 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
 		 */
 		if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
 		    (!(er32(STATUS) & E1000_STATUS_LU)))
-			e1000e_gig_downshift_workaround_ich8lan(hw);
+			schedule_work(&adapter->downshift_task);
 
 		/*
 		 * 80003ES2LAN workaround-- For packet buffer work-around on
@@ -1205,7 +1213,7 @@ static irqreturn_t e1000_intr(int irq, void *data)
 		 */
 		if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
 		    (!(er32(STATUS) & E1000_STATUS_LU)))
-			e1000e_gig_downshift_workaround_ich8lan(hw);
+			schedule_work(&adapter->downshift_task);
 
 		/*
 		 * 80003ES2LAN workaround--
@@ -2912,6 +2920,21 @@ static int e1000_set_mac(struct net_device *netdev, void *p)
 	return 0;
 }
 
+/**
+ * e1000e_update_phy_task - work thread to update phy
+ * @work: pointer to our work struct
+ *
+ * this worker thread exists because we must acquire a
+ * semaphore to read the phy, which we could msleep while
+ * waiting for it, and we can't msleep in a timer.
+ **/
+static void e1000e_update_phy_task(struct work_struct *work)
+{
+	struct e1000_adapter *adapter = container_of(work,
+					struct e1000_adapter, update_phy_task);
+	e1000_get_phy_info(&adapter->hw);
+}
+
 /*
  * Need to wait a few seconds after link up to get diagnostic information from
  * the phy
@@ -2919,7 +2942,7 @@ static int e1000_set_mac(struct net_device *netdev, void *p)
 static void e1000_update_phy_info(unsigned long data)
 {
 	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
-	e1000_get_phy_info(&adapter->hw);
+	schedule_work(&adapter->update_phy_task);
 }
 
 /**
@@ -4578,6 +4601,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 
 	INIT_WORK(&adapter->reset_task, e1000_reset_task);
 	INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
+	INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround);
+	INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task);
 
 	/* Initialize link parameters. User can change them with ethtool */
 	adapter->hw.mac.autoneg = 1;
-- 
cgit v1.2.3


From 23033fad5be0a2c7838cb9e1579919b64af713f6 Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Thu, 2 Oct 2008 16:33:30 -0700
Subject: e1000e: remove phy read from inside spinlock

thanks to tglx, we're finding some interesting reentrancy issues.
this patch removes the phy read from inside a spinlock, paving
the way for removing the spinlock completely.  The phy read was
only feeding a statistic that wasn't used.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/net/e1000e/ethtool.c |  6 +++++-
 drivers/net/e1000e/netdev.c  | 13 -------------
 2 files changed, 5 insertions(+), 14 deletions(-)

diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 5ed8e13d5fed..33a3ff17b5d0 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -432,6 +432,10 @@ static void e1000_get_regs(struct net_device *netdev,
 	regs_buff[11] = er32(TIDV);
 
 	regs_buff[12] = adapter->hw.phy.type;  /* PHY type (IGP=1, M88=0) */
+
+	/* ethtool doesn't use anything past this point, so all this
+	 * code is likely legacy junk for apps that may or may not
+	 * exist */
 	if (hw->phy.type == e1000_phy_m88) {
 		e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
 		regs_buff[13] = (u32)phy_data; /* cable length */
@@ -447,7 +451,7 @@ static void e1000_get_regs(struct net_device *netdev,
 		regs_buff[22] = adapter->phy_stats.receive_errors;
 		regs_buff[23] = regs_buff[13]; /* mdix mode */
 	}
-	regs_buff[21] = adapter->phy_stats.idle_errors;  /* phy idle errors */
+	regs_buff[21] = 0; /* was idle_errors */
 	e1e_rphy(hw, PHY_1000T_STATUS, &phy_data);
 	regs_buff[24] = (u32)phy_data;  /* phy local receiver status */
 	regs_buff[25] = regs_buff[24];  /* phy remote receiver status */
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 803545b2fc8c..835b692e4fe3 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -2954,9 +2954,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
 	struct e1000_hw *hw = &adapter->hw;
 	struct pci_dev *pdev = adapter->pdev;
 	unsigned long irq_flags;
-	u16 phy_tmp;
-
-#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
 
 	/*
 	 * Prevent stats update while adapter is being reset, or if the pci
@@ -3045,15 +3042,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
 
 	/* Tx Dropped needs to be maintained elsewhere */
 
-	/* Phy Stats */
-	if (hw->phy.media_type == e1000_media_type_copper) {
-		if ((adapter->link_speed == SPEED_1000) &&
-		   (!e1e_rphy(hw, PHY_1000T_STATUS, &phy_tmp))) {
-			phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
-			adapter->phy_stats.idle_errors += phy_tmp;
-		}
-	}
-
 	/* Management Stats */
 	adapter->stats.mgptc += er32(MGTPTC);
 	adapter->stats.mgprc += er32(MGTPRC);
@@ -3073,7 +3061,6 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
 	int ret_val;
 	unsigned long irq_flags;
 
-
 	spin_lock_irqsave(&adapter->stats_lock, irq_flags);
 
 	if ((er32(STATUS) & E1000_STATUS_LU) &&
-- 
cgit v1.2.3


From 4fa7553a075918e1e02a6039f9e826c8872b7049 Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Thu, 2 Oct 2008 16:33:35 -0700
Subject: e1000e: drop stats lock

the stats lock is left over from e1000, e1000e no longer
has the adjust tbi stats function that required the addition
of the stats lock to begin with.

adding a mutex to acquire_swflag helped catch this one too.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/net/e1000e/e1000.h  |  1 -
 drivers/net/e1000e/netdev.c | 18 ------------------
 2 files changed, 19 deletions(-)

diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 8087bda97218..5ea6b60fa377 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -257,7 +257,6 @@ struct e1000_adapter {
 	struct net_device *netdev;
 	struct pci_dev *pdev;
 	struct net_device_stats net_stats;
-	spinlock_t stats_lock;      /* prevent concurrent stats updates */
 
 	/* structs defined in e1000_hw.h */
 	struct e1000_hw hw;
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 835b692e4fe3..01e95580d4ae 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -2600,8 +2600,6 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
 	/* Explicitly disable IRQ since the NIC can be in any state. */
 	e1000_irq_disable(adapter);
 
-	spin_lock_init(&adapter->stats_lock);
-
 	set_bit(__E1000_DOWN, &adapter->state);
 	return 0;
 
@@ -2953,7 +2951,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	struct pci_dev *pdev = adapter->pdev;
-	unsigned long irq_flags;
 
 	/*
 	 * Prevent stats update while adapter is being reset, or if the pci
@@ -2964,14 +2961,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
 	if (pci_channel_offline(pdev))
 		return;
 
-	spin_lock_irqsave(&adapter->stats_lock, irq_flags);
-
-	/*
-	 * these counters are modified from e1000_adjust_tbi_stats,
-	 * called from the interrupt context, so they must only
-	 * be written while holding adapter->stats_lock
-	 */
-
 	adapter->stats.crcerrs += er32(CRCERRS);
 	adapter->stats.gprc += er32(GPRC);
 	adapter->stats.gorc += er32(GORCL);
@@ -3046,8 +3035,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
 	adapter->stats.mgptc += er32(MGTPTC);
 	adapter->stats.mgprc += er32(MGTPRC);
 	adapter->stats.mgpdc += er32(MGTPDC);
-
-	spin_unlock_irqrestore(&adapter->stats_lock, irq_flags);
 }
 
 /**
@@ -3059,9 +3046,6 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
 	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_phy_regs *phy = &adapter->phy_regs;
 	int ret_val;
-	unsigned long irq_flags;
-
-	spin_lock_irqsave(&adapter->stats_lock, irq_flags);
 
 	if ((er32(STATUS) & E1000_STATUS_LU) &&
 	    (adapter->hw.phy.media_type == e1000_media_type_copper)) {
@@ -3092,8 +3076,6 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
 		phy->stat1000 = 0;
 		phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF);
 	}
-
-	spin_unlock_irqrestore(&adapter->stats_lock, irq_flags);
 }
 
 static void e1000_print_link_info(struct e1000_adapter *adapter)
-- 
cgit v1.2.3


From 717d438d1fde94decef874b9808379d1f4523453 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 2 Oct 2008 16:33:40 -0700
Subject: e1000e: debug contention on NVM SWFLAG

This patch adds a mutex to the e1000e driver that would help
catch any collisions of two e1000e threads accessing hardware
at the same time.

description and patch updated by Jesse

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/net/e1000e/ich8lan.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index f4b6744d71df..0b6095ba3ce9 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -380,6 +380,9 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
 	return 0;
 }
 
+static DEFINE_MUTEX(nvm_mutex);
+static pid_t nvm_owner = -1;
+
 /**
  *  e1000_acquire_swflag_ich8lan - Acquire software control flag
  *  @hw: pointer to the HW structure
@@ -393,6 +396,15 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 	u32 extcnf_ctrl;
 	u32 timeout = PHY_CFG_TIMEOUT;
 
+	WARN_ON(preempt_count());
+
+	if (!mutex_trylock(&nvm_mutex)) {
+		WARN(1, KERN_ERR "e1000e mutex contention. Owned by pid %d\n",
+		     nvm_owner);
+		mutex_lock(&nvm_mutex);
+	}
+	nvm_owner = current->pid;
+
 	while (timeout) {
 		extcnf_ctrl = er32(EXTCNF_CTRL);
 		extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
@@ -407,6 +419,8 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 
 	if (!timeout) {
 		hw_dbg(hw, "FW or HW has locked the resource for too long.\n");
+		nvm_owner = -1;
+		mutex_unlock(&nvm_mutex);
 		return -E1000_ERR_CONFIG;
 	}
 
@@ -428,6 +442,9 @@ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw)
 	extcnf_ctrl = er32(EXTCNF_CTRL);
 	extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
 	ew32(EXTCNF_CTRL, extcnf_ctrl);
+
+	nvm_owner = -1;
+	mutex_unlock(&nvm_mutex);
 }
 
 /**
-- 
cgit v1.2.3


From 6f92a6a7ddba5ae7ca0f0255d46410465dcf2ba6 Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Thu, 2 Oct 2008 16:33:45 -0700
Subject: e1000e: update version from k4 to k6

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/net/e1000e/netdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 01e95580d4ae..b81c4237b5d3 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -47,7 +47,7 @@
 
 #include "e1000.h"
 
-#define DRV_VERSION "0.3.3.3-k4"
+#define DRV_VERSION "0.3.3.3-k6"
 char e1000e_driver_name[] = "e1000e";
 const char e1000e_driver_version[] = DRV_VERSION;
 
-- 
cgit v1.2.3


From b5ff7df3df9efab511244d5a299fce706c71af48 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Thu, 2 Oct 2008 18:52:51 -0700
Subject: Check mapped ranges on sysfs resource files

This is loosely based on a patch by Jesse Barnes to check the user-space
PCI mappings though the sysfs interfaces.  Quoting Jesse's original
explanation:

  It's fairly common for applications to map PCI resources through sysfs.
  However, with the current implementation, it's possible for an application
  to map far more than the range corresponding to the resourceN file it
  opened.  This patch plugs that hole by checking the range at mmap time,
  similar to what is done on platforms like sparc64 in their lower level
  PCI remapping routines.

  It was initially put together to help debug the e1000e NVRAM corruption
  problem, since we initially thought an X driver might be walking past the
  end of one of its mappings and clobbering the NVRAM.  It now looks like
  that's not the case, but doing the check is still important for obvious
  reasons.

and this version of the patch differs in that it uses a helper function
to clarify the code, and does all the checks in pages (instead of bytes)
in order to avoid overflows when doing "<< PAGE_SHIFT" etc.

Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/pci/pci-sysfs.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 9c718583a237..77baff022f71 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -16,6 +16,7 @@
 
 
 #include <linux/kernel.h>
+#include <linux/sched.h>
 #include <linux/pci.h>
 #include <linux/stat.h>
 #include <linux/topology.h>
@@ -484,6 +485,21 @@ pci_mmap_legacy_mem(struct kobject *kobj, struct bin_attribute *attr,
 #endif /* HAVE_PCI_LEGACY */
 
 #ifdef HAVE_PCI_MMAP
+
+static int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma)
+{
+	unsigned long nr, start, size;
+
+	nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
+	start = vma->vm_pgoff;
+	size = pci_resource_len(pdev, resno) >> PAGE_SHIFT;
+	if (start < size && size - start >= nr)
+		return 1;
+	WARN(1, "process \"%s\" tried to map 0x%08lx-0x%08lx on %s BAR %d (size 0x%08lx)\n",
+		current->comm, start, start+nr, pci_name(pdev), resno, size);
+	return 0;
+}
+
 /**
  * pci_mmap_resource - map a PCI resource into user memory space
  * @kobj: kobject for mapping
@@ -510,6 +526,9 @@ pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
 	if (i >= PCI_ROM_RESOURCE)
 		return -ENODEV;
 
+	if (!pci_mmap_fits(pdev, i, vma))
+		return -EINVAL;
+
 	/* pci_mmap_page_range() expects the same kind of entry as coming
 	 * from /proc/bus/pci/ which is a "user visible" value. If this is
 	 * different from the resource itself, arch will do necessary fixup.
-- 
cgit v1.2.3


From 95b866d5afcafee00fc9ad70665e48c86d8c4e0f Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 3 Oct 2008 09:18:17 -0700
Subject: e1000e: Fix incorrect debug warning

Doing 'WARN_ON(preempt_count())' was horribly horribly wrong, and would
cause tons of warnings at bootup if PREEMPT was enabled because the
initcalls currently run with the kernel lock, which increments the
preempt count.

At the same time, the warning was also insufficient, since it didn't
check that interrupts were enabled.

The proper debug function to use for something that can sleep and wants
a warning if it's called in the wrong context is 'might_sleep()'.

Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/net/e1000e/ich8lan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 0b6095ba3ce9..bcd2bc477af2 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -396,7 +396,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 	u32 extcnf_ctrl;
 	u32 timeout = PHY_CFG_TIMEOUT;
 
-	WARN_ON(preempt_count());
+	might_sleep();
 
 	if (!mutex_trylock(&nvm_mutex)) {
 		WARN(1, KERN_ERR "e1000e mutex contention. Owned by pid %d\n",
-- 
cgit v1.2.3


From b7e4226e4f427b59dc8e9c45a2a1a1ed1353a140 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Wed, 1 Oct 2008 21:52:41 +0100
Subject: [MIPS] Build fix: Fix irq flags type

Though from a hardware perspective it would be sensible to use only a
32-bit unsigned int type Linux defines interrupt flags to be stored in
an unsigned long and nothing else.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/ptrace.c   | 2 +-
 arch/mips/kernel/smtc.c     | 6 +++---
 include/asm-mips/mipsregs.h | 6 +++---
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 35234b92b9a5..96ffc9c6d194 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -238,7 +238,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		case FPC_EIR: {	/* implementation / version register */
 			unsigned int flags;
 #ifdef CONFIG_MIPS_MT_SMTC
-			unsigned int irqflags;
+			unsigned long irqflags;
 			unsigned int mtflags;
 #endif /* CONFIG_MIPS_MT_SMTC */
 
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index a516286532ab..05f2708a9029 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -556,7 +556,7 @@ void mipsmt_prepare_cpus(void)
 void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle)
 {
 	extern u32 kernelsp[NR_CPUS];
-	long flags;
+	unsigned long flags;
 	int mtflags;
 
 	LOCK_MT_PRA();
@@ -753,7 +753,7 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
 {
 	int tcstatus;
 	struct smtc_ipi *pipi;
-	long flags;
+	unsigned long flags;
 	int mtflags;
 
 	if (cpu == smp_processor_id()) {
@@ -975,7 +975,7 @@ static irqreturn_t ipi_interrupt(int irq, void *dev_idm)
 	struct smtc_ipi *pipi;
 	unsigned long tcstatus;
 	int sent;
-	long flags;
+	unsigned long flags;
 	unsigned int mtflags;
 	unsigned int vpflags;
 
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
index a46f8e258e6b..979866000da4 100644
--- a/include/asm-mips/mipsregs.h
+++ b/include/asm-mips/mipsregs.h
@@ -1462,7 +1462,7 @@ set_c0_##name(unsigned int set)					\
 {								\
 	unsigned int res;					\
 	unsigned int omt;					\
-	unsigned int flags;					\
+	unsigned long flags;					\
 								\
 	local_irq_save(flags);					\
 	omt = __dmt();						\
@@ -1480,7 +1480,7 @@ clear_c0_##name(unsigned int clear)				\
 {								\
 	unsigned int res;					\
 	unsigned int omt;					\
-	unsigned int flags;					\
+	unsigned long flags;					\
 								\
 	local_irq_save(flags);					\
 	omt = __dmt();						\
@@ -1498,7 +1498,7 @@ change_c0_##name(unsigned int change, unsigned int new)		\
 {								\
 	unsigned int res;					\
 	unsigned int omt;					\
-	unsigned int flags;					\
+	unsigned long flags;					\
 								\
 	local_irq_save(flags);					\
 								\
-- 
cgit v1.2.3


From 498a863fdfb3e60d2e0e964cd202c2030bda1005 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Wed, 1 Oct 2008 22:23:52 +0100
Subject: [MIPS] SMTC: Build fix: Fix filename in Makefile

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mti-malta/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
index 3b7dd722c32a..cef2db8d2225 100644
--- a/arch/mips/mti-malta/Makefile
+++ b/arch/mips/mti-malta/Makefile
@@ -15,6 +15,6 @@ obj-$(CONFIG_EARLY_PRINTK)	+= malta-console.o
 obj-$(CONFIG_PCI)		+= malta-pci.o
 
 # FIXME FIXME FIXME
-obj-$(CONFIG_MIPS_MT_SMTC)	+= malta_smtc.o
+obj-$(CONFIG_MIPS_MT_SMTC)	+= malta-smtc.o
 
 EXTRA_CFLAGS += -Werror
-- 
cgit v1.2.3


From 9cc123631b6630948eb5059d218f44424888daa7 Mon Sep 17 00:00:00 2001
From: "Kevin D. Kissell" <kevink@paralogos.com>
Date: Tue, 9 Sep 2008 21:33:36 +0200
Subject: [MIPS] SMTC: Fix holes in SMTC and FPU affinity support.

Signed-off-by: Kevin D. Kissell <kevink@paralogos.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/mips-mt-fpaff.c |  2 +-
 arch/mips/kernel/process.c       | 19 +++++++++----------
 arch/mips/kernel/traps.c         |  6 ++++--
 3 files changed, 14 insertions(+), 13 deletions(-)

diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c
index df4d3f2f740c..dc9eb72ed9de 100644
--- a/arch/mips/kernel/mips-mt-fpaff.c
+++ b/arch/mips/kernel/mips-mt-fpaff.c
@@ -159,7 +159,7 @@ __setup("fpaff=", fpaff_thresh);
 /*
  * FPU Use Factor empirically derived from experiments on 34K
  */
-#define FPUSEFACTOR 333
+#define FPUSEFACTOR 2000
 
 static __init int mt_fp_affinity_init(void)
 {
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index ce7684335a41..22fc19bbe87f 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -55,7 +55,7 @@ void __noreturn cpu_idle(void)
 	while (1) {
 		tick_nohz_stop_sched_tick(1);
 		while (!need_resched()) {
-#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
+#ifdef CONFIG_MIPS_MT_SMTC
 			extern void smtc_idle_loop_hook(void);
 
 			smtc_idle_loop_hook();
@@ -145,19 +145,18 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	 */
 	p->thread.cp0_status = read_c0_status() & ~(ST0_CU2|ST0_CU1);
 	childregs->cp0_status &= ~(ST0_CU2|ST0_CU1);
+
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC restores TCStatus after Status, and the CU bits
+	 * are aliased there.
+	 */
+	childregs->cp0_tcstatus &= ~(ST0_CU2|ST0_CU1);
+#endif
 	clear_tsk_thread_flag(p, TIF_USEDFPU);
 
 #ifdef CONFIG_MIPS_MT_FPAFF
 	clear_tsk_thread_flag(p, TIF_FPUBOUND);
-
-	/*
-	 * FPU affinity support is cleaner if we track the
-	 * user-visible CPU affinity from the very beginning.
-	 * The generic cpus_allowed mask will already have
-	 * been copied from the parent before copy_thread
-	 * is invoked.
-	 */
-	p->thread.user_cpus_allowed = p->cpus_allowed;
 #endif /* CONFIG_MIPS_MT_FPAFF */
 
 	if (clone_flags & CLONE_SETTLS)
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 5fd0cd020af5..b602ac6eb47d 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -825,8 +825,10 @@ static void mt_ase_fp_affinity(void)
 		if (cpus_intersects(current->cpus_allowed, mt_fpu_cpumask)) {
 			cpumask_t tmask;
 
-			cpus_and(tmask, current->thread.user_cpus_allowed,
-			         mt_fpu_cpumask);
+			current->thread.user_cpus_allowed
+				= current->cpus_allowed;
+			cpus_and(tmask, current->cpus_allowed,
+				mt_fpu_cpumask);
 			set_cpus_allowed(current, tmask);
 			set_thread_flag(TIF_FPUBOUND);
 		}
-- 
cgit v1.2.3


From d2bb01b042a38219fbddaafc214c5beb96248d2f Mon Sep 17 00:00:00 2001
From: "Kevin D. Kissell" <kevink@paralogos.com>
Date: Tue, 9 Sep 2008 21:35:01 +0200
Subject: [MIPS] SMTC: Close tiny holes in the SMTC IPI replay system.

Signed-off-by: Kevin D. Kissell <kevink@paralogos.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/entry.S      | 10 +++---
 arch/mips/kernel/smtc.c       |  2 +-
 include/asm-mips/stackframe.h | 72 ++++++++++++++++++++++++++++++++++++-------
 3 files changed, 67 insertions(+), 17 deletions(-)

diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
index e29598ae939d..ffa331029e08 100644
--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@@ -79,11 +79,6 @@ FEXPORT(syscall_exit)
 
 FEXPORT(restore_all)			# restore full frame
 #ifdef CONFIG_MIPS_MT_SMTC
-/* Detect and execute deferred IPI "interrupts" */
-	LONG_L	s0, TI_REGS($28)
-	LONG_S	sp, TI_REGS($28)
-	jal	deferred_smtc_ipi
-	LONG_S	s0, TI_REGS($28)
 #ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
 /* Re-arm any temporarily masked interrupts not explicitly "acked" */
 	mfc0	v0, CP0_TCSTATUS
@@ -112,6 +107,11 @@ FEXPORT(restore_all)			# restore full frame
 	xor	t0, t0, t3
 	mtc0	t0, CP0_TCCONTEXT
 #endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */
+/* Detect and execute deferred IPI "interrupts" */
+	LONG_L	s0, TI_REGS($28)
+	LONG_S	sp, TI_REGS($28)
+	jal	deferred_smtc_ipi
+	LONG_S	s0, TI_REGS($28)
 #endif /* CONFIG_MIPS_MT_SMTC */
 	.set	noat
 	RESTORE_TEMP
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 05f2708a9029..39b491b9ad87 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -70,7 +70,7 @@ static atomic_t ipi_timer_latch[NR_CPUS];
 
 #define IPIBUF_PER_CPU 4
 
-static struct smtc_ipi_q IPIQ[NR_CPUS];
+struct smtc_ipi_q IPIQ[NR_CPUS];
 static struct smtc_ipi_q freeIPIq;
 
 
diff --git a/include/asm-mips/stackframe.h b/include/asm-mips/stackframe.h
index 051e1af0bb95..4c37c4e5f72e 100644
--- a/include/asm-mips/stackframe.h
+++ b/include/asm-mips/stackframe.h
@@ -297,14 +297,31 @@
 #ifdef CONFIG_MIPS_MT_SMTC
 		.set	mips32r2
 		/*
-		 * This may not really be necessary if ints are already
-		 * inhibited here.
+		 * We need to make sure the read-modify-write
+		 * of Status below isn't perturbed by an interrupt
+		 * or cross-TC access, so we need to do at least a DMT,
+		 * protected by an interrupt-inhibit. But setting IXMT
+		 * also creates a few-cycle window where an IPI could
+		 * be queued and not be detected before potentially
+		 * returning to a WAIT or user-mode loop. It must be
+		 * replayed.
+		 *
+		 * We're in the middle of a context switch, and
+		 * we can't dispatch it directly without trashing
+		 * some registers, so we'll try to detect this unlikely
+		 * case and program a software interrupt in the VPE,
+		 * as would be done for a cross-VPE IPI.  To accomodate
+		 * the handling of that case, we're doing a DVPE instead
+		 * of just a DMT here to protect against other threads.
+		 * This is a lot of cruft to cover a tiny window.
+		 * If you can find a better design, implement it!
+		 *
 		 */
 		mfc0	v0, CP0_TCSTATUS
 		ori	v0, TCSTATUS_IXMT
 		mtc0	v0, CP0_TCSTATUS
 		_ehb
-		DMT	5				# dmt a1
+		DVPE	5				# dvpe a1
 		jal	mips_ihb
 #endif /* CONFIG_MIPS_MT_SMTC */
 		mfc0	a0, CP0_STATUS
@@ -325,17 +342,50 @@
  */
 		LONG_L	v1, PT_TCSTATUS(sp)
 		_ehb
-		mfc0	v0, CP0_TCSTATUS
+		mfc0	a0, CP0_TCSTATUS
 		andi	v1, TCSTATUS_IXMT
-		/* We know that TCStatua.IXMT should be set from above */
-		xori	v0, v0, TCSTATUS_IXMT
-		or	v0, v0, v1
-		mtc0	v0, CP0_TCSTATUS
-		_ehb
-		andi	a1, a1, VPECONTROL_TE
+		bnez	v1, 0f
+
+/*
+ * We'd like to detect any IPIs queued in the tiny window
+ * above and request an software interrupt to service them
+ * when we ERET.
+ *
+ * Computing the offset into the IPIQ array of the executing
+ * TC's IPI queue in-line would be tedious.  We use part of
+ * the TCContext register to hold 16 bits of offset that we
+ * can add in-line to find the queue head.
+ */
+		mfc0	v0, CP0_TCCONTEXT
+		la	a2, IPIQ
+		srl	v0, v0, 16
+		addu	a2, a2, v0
+		LONG_L	v0, 0(a2)
+		beqz	v0, 0f
+/*
+ * If we have a queue, provoke dispatch within the VPE by setting C_SW1
+ */
+		mfc0	v0, CP0_CAUSE
+		ori	v0, v0, C_SW1
+		mtc0	v0, CP0_CAUSE
+0:
+		/*
+		 * This test should really never branch but
+		 * let's be prudent here.  Having atomized
+		 * the shared register modifications, we can
+		 * now EVPE, and must do so before interrupts
+		 * are potentially re-enabled.
+		 */
+		andi	a1, a1, MVPCONTROL_EVP
 		beqz	a1, 1f
-		emt
+		evpe
 1:
+		/* We know that TCStatua.IXMT should be set from above */
+		xori	a0, a0, TCSTATUS_IXMT
+		or	a0, a0, v1
+		mtc0	a0, CP0_TCSTATUS
+		_ehb
+
 		.set	mips0
 #endif /* CONFIG_MIPS_MT_SMTC */
 		LONG_L	v1, PT_EPC(sp)
-- 
cgit v1.2.3


From 8531a35e5e275b17c57c39b7911bc2b37025f28c Mon Sep 17 00:00:00 2001
From: "Kevin D. Kissell" <kevink@paralogos.com>
Date: Tue, 9 Sep 2008 21:48:52 +0200
Subject: [MIPS] SMTC: Fix SMTC dyntick support.

Rework of SMTC support to make it work with the new clock event system,
allowing "tickless" operation, and to make it compatible with the use of
the "wait_irqoff" idle loop.  The new clocking scheme means that the
previously optional IPI instant replay mechanism is now required, and has
been made more robust.

Signed-off-by: Kevin D. Kissell <kevink@paralogos.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig                |  26 +---
 arch/mips/kernel/Makefile        |   1 +
 arch/mips/kernel/cevt-r4k.c      | 173 ++++++---------------
 arch/mips/kernel/cevt-smtc.c     | 321 +++++++++++++++++++++++++++++++++++++++
 arch/mips/kernel/cpu-probe.c     |  10 +-
 arch/mips/kernel/genex.S         |   4 +-
 arch/mips/kernel/smtc.c          | 252 +++++++++++++++---------------
 arch/mips/mti-malta/malta-smtc.c |   9 +-
 include/asm-mips/cevt-r4k.h      |  46 ++++++
 include/asm-mips/irqflags.h      |  26 +++-
 include/asm-mips/smtc.h          |   8 +-
 11 files changed, 597 insertions(+), 279 deletions(-)
 create mode 100644 arch/mips/kernel/cevt-smtc.c
 create mode 100644 include/asm-mips/cevt-r4k.h

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 49896a2a1d72..c930b8ceb418 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1403,7 +1403,6 @@ config MIPS_MT_SMTC
 	depends on CPU_MIPS32_R2
 	#depends on CPU_MIPS64_R2		# once there is hardware ...
 	depends on SYS_SUPPORTS_MULTITHREADING
-	select GENERIC_CLOCKEVENTS_BROADCAST
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
 	select MIPS_MT
@@ -1451,32 +1450,17 @@ config MIPS_VPE_LOADER
 	  Includes a loader for loading an elf relocatable object
 	  onto another VPE and running it.
 
-config MIPS_MT_SMTC_INSTANT_REPLAY
-	bool "Low-latency Dispatch of Deferred SMTC IPIs"
-	depends on MIPS_MT_SMTC && !PREEMPT
-	default y
-	help
-	  SMTC pseudo-interrupts between TCs are deferred and queued
-	  if the target TC is interrupt-inhibited (IXMT). In the first
-	  SMTC prototypes, these queued IPIs were serviced on return
-	  to user mode, or on entry into the kernel idle loop. The
-	  INSTANT_REPLAY option dispatches them as part of local_irq_restore()
-	  processing, which adds runtime overhead (hence the option to turn
-	  it off), but ensures that IPIs are handled promptly even under
-	  heavy I/O interrupt load.
-
 config MIPS_MT_SMTC_IM_BACKSTOP
 	bool "Use per-TC register bits as backstop for inhibited IM bits"
 	depends on MIPS_MT_SMTC
-	default y
+	default n
 	help
 	  To support multiple TC microthreads acting as "CPUs" within
 	  a VPE, VPE-wide interrupt mask bits must be specially manipulated
 	  during interrupt handling. To support legacy drivers and interrupt
 	  controller management code, SMTC has a "backstop" to track and
 	  if necessary restore the interrupt mask. This has some performance
-	  impact on interrupt service overhead. Disable it only if you know
-	  what you are doing.
+	  impact on interrupt service overhead.
 
 config MIPS_MT_SMTC_IRQAFF
 	bool "Support IRQ affinity API"
@@ -1486,10 +1470,8 @@ config MIPS_MT_SMTC_IRQAFF
 	  Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.)
 	  for SMTC Linux kernel. Requires platform support, of which
 	  an example can be found in the MIPS kernel i8259 and Malta
-	  platform code.  It is recommended that MIPS_MT_SMTC_INSTANT_REPLAY
-	  be enabled if MIPS_MT_SMTC_IRQAFF is used. Adds overhead to
-	  interrupt dispatch, and should be used only if you know what
-	  you are doing.
+	  platform code.  Adds some overhead to interrupt dispatch, and
+	  should be used only if you know what you are doing.
 
 config MIPS_VPE_LOADER_TOM
 	bool "Load VPE program into memory hidden from linux"
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 706f93974797..25775cb54000 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -10,6 +10,7 @@ obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \
 
 obj-$(CONFIG_CEVT_BCM1480)	+= cevt-bcm1480.o
 obj-$(CONFIG_CEVT_R4K)		+= cevt-r4k.o
+obj-$(CONFIG_MIPS_MT_SMTC)	+= cevt-smtc.o
 obj-$(CONFIG_CEVT_DS1287)	+= cevt-ds1287.o
 obj-$(CONFIG_CEVT_GT641XX)	+= cevt-gt641xx.o
 obj-$(CONFIG_CEVT_SB1250)	+= cevt-sb1250.o
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index 24a2d907aa0d..4a4c59f2737a 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -12,6 +12,14 @@
 
 #include <asm/smtc_ipi.h>
 #include <asm/time.h>
+#include <asm/cevt-r4k.h>
+
+/*
+ * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
+ * of these routines with SMTC-specific variants.
+ */
+
+#ifndef CONFIG_MIPS_MT_SMTC
 
 static int mips_next_event(unsigned long delta,
                            struct clock_event_device *evt)
@@ -19,60 +27,27 @@ static int mips_next_event(unsigned long delta,
 	unsigned int cnt;
 	int res;
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	{
-	unsigned long flags, vpflags;
-	local_irq_save(flags);
-	vpflags = dvpe();
-#endif
 	cnt = read_c0_count();
 	cnt += delta;
 	write_c0_compare(cnt);
 	res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
-#ifdef CONFIG_MIPS_MT_SMTC
-	evpe(vpflags);
-	local_irq_restore(flags);
-	}
-#endif
 	return res;
 }
 
-static void mips_set_mode(enum clock_event_mode mode,
-                          struct clock_event_device *evt)
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+void mips_set_clock_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
 {
 	/* Nothing to do ...  */
 }
 
-static DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
-static int cp0_timer_irq_installed;
+DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
+int cp0_timer_irq_installed;
 
-/*
- * Timer ack for an R4k-compatible timer of a known frequency.
- */
-static void c0_timer_ack(void)
-{
-	write_c0_compare(read_c0_compare());
-}
+#ifndef CONFIG_MIPS_MT_SMTC
 
-/*
- * Possibly handle a performance counter interrupt.
- * Return true if the timer interrupt should not be checked
- */
-static inline int handle_perf_irq(int r2)
-{
-	/*
-	 * The performance counter overflow interrupt may be shared with the
-	 * timer interrupt (cp0_perfcount_irq < 0). If it is and a
-	 * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
-	 * and we can't reliably determine if a counter interrupt has also
-	 * happened (!r2) then don't check for a timer interrupt.
-	 */
-	return (cp0_perfcount_irq < 0) &&
-		perf_irq() == IRQ_HANDLED &&
-		!r2;
-}
-
-static irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
+irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
 {
 	const int r2 = cpu_has_mips_r2;
 	struct clock_event_device *cd;
@@ -93,12 +68,8 @@ static irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
 	 * interrupt.  Being the paranoiacs we are we check anyway.
 	 */
 	if (!r2 || (read_c0_cause() & (1 << 30))) {
-		c0_timer_ack();
-#ifdef CONFIG_MIPS_MT_SMTC
-		if (cpu_data[cpu].vpe_id)
-			goto out;
-		cpu = 0;
-#endif
+		/* Clear Count/Compare Interrupt */
+		write_c0_compare(read_c0_compare());
 		cd = &per_cpu(mips_clockevent_device, cpu);
 		cd->event_handler(cd);
 	}
@@ -107,65 +78,16 @@ out:
 	return IRQ_HANDLED;
 }
 
-static struct irqaction c0_compare_irqaction = {
+#endif /* Not CONFIG_MIPS_MT_SMTC */
+
+struct irqaction c0_compare_irqaction = {
 	.handler = c0_compare_interrupt,
-#ifdef CONFIG_MIPS_MT_SMTC
-	.flags = IRQF_DISABLED,
-#else
 	.flags = IRQF_DISABLED | IRQF_PERCPU,
-#endif
 	.name = "timer",
 };
 
-#ifdef CONFIG_MIPS_MT_SMTC
-DEFINE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device);
-
-static void smtc_set_mode(enum clock_event_mode mode,
-                          struct clock_event_device *evt)
-{
-}
-
-static void mips_broadcast(cpumask_t mask)
-{
-	unsigned int cpu;
-
-	for_each_cpu_mask(cpu, mask)
-		smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0);
-}
-
-static void setup_smtc_dummy_clockevent_device(void)
-{
-	//uint64_t mips_freq = mips_hpt_^frequency;
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *cd;
 
-	cd = &per_cpu(smtc_dummy_clockevent_device, cpu);
-
-	cd->name		= "SMTC";
-	cd->features		= CLOCK_EVT_FEAT_DUMMY;
-
-	/* Calculate the min / max delta */
-	cd->mult	= 0; //div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
-	cd->shift		= 0; //32;
-	cd->max_delta_ns	= 0; //clockevent_delta2ns(0x7fffffff, cd);
-	cd->min_delta_ns	= 0; //clockevent_delta2ns(0x30, cd);
-
-	cd->rating		= 200;
-	cd->irq			= 17; //-1;
-//	if (cpu)
-//		cd->cpumask	= CPU_MASK_ALL; // cpumask_of_cpu(cpu);
-//	else
-		cd->cpumask	= cpumask_of_cpu(cpu);
-
-	cd->set_mode		= smtc_set_mode;
-
-	cd->broadcast		= mips_broadcast;
-
-	clockevents_register_device(cd);
-}
-#endif
-
-static void mips_event_handler(struct clock_event_device *dev)
+void mips_event_handler(struct clock_event_device *dev)
 {
 }
 
@@ -177,7 +99,23 @@ static int c0_compare_int_pending(void)
 	return (read_c0_cause() >> cp0_compare_irq) & 0x100;
 }
 
-static int c0_compare_int_usable(void)
+/*
+ * Compare interrupt can be routed and latched outside the core,
+ * so a single execution hazard barrier may not be enough to give
+ * it time to clear as seen in the Cause register.  4 time the
+ * pipeline depth seems reasonably conservative, and empirically
+ * works better in configurations with high CPU/bus clock ratios.
+ */
+
+#define compare_change_hazard() \
+	do { \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+	} while (0)
+
+int c0_compare_int_usable(void)
 {
 	unsigned int delta;
 	unsigned int cnt;
@@ -187,7 +125,7 @@ static int c0_compare_int_usable(void)
 	 */
 	if (c0_compare_int_pending()) {
 		write_c0_compare(read_c0_count());
-		irq_disable_hazard();
+		compare_change_hazard();
 		if (c0_compare_int_pending())
 			return 0;
 	}
@@ -196,7 +134,7 @@ static int c0_compare_int_usable(void)
 		cnt = read_c0_count();
 		cnt += delta;
 		write_c0_compare(cnt);
-		irq_disable_hazard();
+		compare_change_hazard();
 		if ((int)(read_c0_count() - cnt) < 0)
 		    break;
 		/* increase delta if the timer was already expired */
@@ -205,11 +143,12 @@ static int c0_compare_int_usable(void)
 	while ((int)(read_c0_count() - cnt) <= 0)
 		;	/* Wait for expiry  */
 
+	compare_change_hazard();
 	if (!c0_compare_int_pending())
 		return 0;
 
 	write_c0_compare(read_c0_count());
-	irq_disable_hazard();
+	compare_change_hazard();
 	if (c0_compare_int_pending())
 		return 0;
 
@@ -219,6 +158,8 @@ static int c0_compare_int_usable(void)
 	return 1;
 }
 
+#ifndef CONFIG_MIPS_MT_SMTC
+
 int __cpuinit mips_clockevent_init(void)
 {
 	uint64_t mips_freq = mips_hpt_frequency;
@@ -229,17 +170,6 @@ int __cpuinit mips_clockevent_init(void)
 	if (!cpu_has_counter || !mips_hpt_frequency)
 		return -ENXIO;
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	setup_smtc_dummy_clockevent_device();
-
-	/*
-	 * On SMTC we only register VPE0's compare interrupt as clockevent
-	 * device.
-	 */
-	if (cpu)
-		return 0;
-#endif
-
 	if (!c0_compare_int_usable())
 		return -ENXIO;
 
@@ -265,13 +195,9 @@ int __cpuinit mips_clockevent_init(void)
 
 	cd->rating		= 300;
 	cd->irq			= irq;
-#ifdef CONFIG_MIPS_MT_SMTC
-	cd->cpumask		= CPU_MASK_ALL;
-#else
 	cd->cpumask		= cpumask_of_cpu(cpu);
-#endif
 	cd->set_next_event	= mips_next_event;
-	cd->set_mode		= mips_set_mode;
+	cd->set_mode		= mips_set_clock_mode;
 	cd->event_handler	= mips_event_handler;
 
 	clockevents_register_device(cd);
@@ -281,12 +207,9 @@ int __cpuinit mips_clockevent_init(void)
 
 	cp0_timer_irq_installed = 1;
 
-#ifdef CONFIG_MIPS_MT_SMTC
-#define CPUCTR_IMASKBIT (0x100 << cp0_compare_irq)
-	setup_irq_smtc(irq, &c0_compare_irqaction, CPUCTR_IMASKBIT);
-#else
 	setup_irq(irq, &c0_compare_irqaction);
-#endif
 
 	return 0;
 }
+
+#endif /* Not CONFIG_MIPS_MT_SMTC */
diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c
new file mode 100644
index 000000000000..5162fe4b5952
--- /dev/null
+++ b/arch/mips/kernel/cevt-smtc.c
@@ -0,0 +1,321 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2008 Kevin D. Kissell, Paralogos sarl
+ */
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+
+#include <asm/smtc_ipi.h>
+#include <asm/time.h>
+#include <asm/cevt-r4k.h>
+
+/*
+ * Variant clock event timer support for SMTC on MIPS 34K, 1004K
+ * or other MIPS MT cores.
+ *
+ * Notes on SMTC Support:
+ *
+ * SMTC has multiple microthread TCs pretending to be Linux CPUs.
+ * But there's only one Count/Compare pair per VPE, and Compare
+ * interrupts are taken opportunisitically by available TCs
+ * bound to the VPE with the Count register.  The new timer
+ * framework provides for global broadcasts, but we really
+ * want VPE-level multicasts for best behavior. So instead
+ * of invoking the high-level clock-event broadcast code,
+ * this version of SMTC support uses the historical SMTC
+ * multicast mechanisms "under the hood", appearing to the
+ * generic clock layer as if the interrupts are per-CPU.
+ *
+ * The approach taken here is to maintain a set of NR_CPUS
+ * virtual timers, and track which "CPU" needs to be alerted
+ * at each event.
+ *
+ * It's unlikely that we'll see a MIPS MT core with more than
+ * 2 VPEs, but we *know* that we won't need to handle more
+ * VPEs than we have "CPUs".  So NCPUs arrays of NCPUs elements
+ * is always going to be overkill, but always going to be enough.
+ */
+
+unsigned long smtc_nexttime[NR_CPUS][NR_CPUS];
+static int smtc_nextinvpe[NR_CPUS];
+
+/*
+ * Timestamps stored are absolute values to be programmed
+ * into Count register.  Valid timestamps will never be zero.
+ * If a Zero Count value is actually calculated, it is converted
+ * to be a 1, which will introduce 1 or two CPU cycles of error
+ * roughly once every four billion events, which at 1000 HZ means
+ * about once every 50 days.  If that's actually a problem, one
+ * could alternate squashing 0 to 1 and to -1.
+ */
+
+#define MAKEVALID(x) (((x) == 0L) ? 1L : (x))
+#define ISVALID(x) ((x) != 0L)
+
+/*
+ * Time comparison is subtle, as it's really truncated
+ * modular arithmetic.
+ */
+
+#define IS_SOONER(a, b, reference) \
+    (((a) - (unsigned long)(reference)) < ((b) - (unsigned long)(reference)))
+
+/*
+ * CATCHUP_INCREMENT, used when the function falls behind the counter.
+ * Could be an increasing function instead of a constant;
+ */
+
+#define CATCHUP_INCREMENT 64
+
+static int mips_next_event(unsigned long delta,
+				struct clock_event_device *evt)
+{
+	unsigned long flags;
+	unsigned int mtflags;
+	unsigned long timestamp, reference, previous;
+	unsigned long nextcomp = 0L;
+	int vpe = current_cpu_data.vpe_id;
+	int cpu = smp_processor_id();
+	local_irq_save(flags);
+	mtflags = dmt();
+
+	/*
+	 * Maintain the per-TC virtual timer
+	 * and program the per-VPE shared Count register
+	 * as appropriate here...
+	 */
+	reference = (unsigned long)read_c0_count();
+	timestamp = MAKEVALID(reference + delta);
+	/*
+	 * To really model the clock, we have to catch the case
+	 * where the current next-in-VPE timestamp is the old
+	 * timestamp for the calling CPE, but the new value is
+	 * in fact later.  In that case, we have to do a full
+	 * scan and discover the new next-in-VPE CPU id and
+	 * timestamp.
+	 */
+	previous = smtc_nexttime[vpe][cpu];
+	if (cpu == smtc_nextinvpe[vpe] && ISVALID(previous)
+	    && IS_SOONER(previous, timestamp, reference)) {
+		int i;
+		int soonest = cpu;
+
+		/*
+		 * Update timestamp array here, so that new
+		 * value gets considered along with those of
+		 * other virtual CPUs on the VPE.
+		 */
+		smtc_nexttime[vpe][cpu] = timestamp;
+		for_each_online_cpu(i) {
+			if (ISVALID(smtc_nexttime[vpe][i])
+			    && IS_SOONER(smtc_nexttime[vpe][i],
+				smtc_nexttime[vpe][soonest], reference)) {
+				    soonest = i;
+			}
+		}
+		smtc_nextinvpe[vpe] = soonest;
+		nextcomp = smtc_nexttime[vpe][soonest];
+	/*
+	 * Otherwise, we don't have to process the whole array rank,
+	 * we just have to see if the event horizon has gotten closer.
+	 */
+	} else {
+		if (!ISVALID(smtc_nexttime[vpe][smtc_nextinvpe[vpe]]) ||
+		    IS_SOONER(timestamp,
+			smtc_nexttime[vpe][smtc_nextinvpe[vpe]], reference)) {
+			    smtc_nextinvpe[vpe] = cpu;
+			    nextcomp = timestamp;
+		}
+		/*
+		 * Since next-in-VPE may me the same as the executing
+		 * virtual CPU, we update the array *after* checking
+		 * its value.
+		 */
+		smtc_nexttime[vpe][cpu] = timestamp;
+	}
+
+	/*
+	 * It may be that, in fact, we don't need to update Compare,
+	 * but if we do, we want to make sure we didn't fall into
+	 * a crack just behind Count.
+	 */
+	if (ISVALID(nextcomp)) {
+		write_c0_compare(nextcomp);
+		ehb();
+		/*
+		 * We never return an error, we just make sure
+		 * that we trigger the handlers as quickly as
+		 * we can if we fell behind.
+		 */
+		while ((nextcomp - (unsigned long)read_c0_count())
+			> (unsigned long)LONG_MAX) {
+			nextcomp += CATCHUP_INCREMENT;
+			write_c0_compare(nextcomp);
+			ehb();
+		}
+	}
+	emt(mtflags);
+	local_irq_restore(flags);
+	return 0;
+}
+
+
+void smtc_distribute_timer(int vpe)
+{
+	unsigned long flags;
+	unsigned int mtflags;
+	int cpu;
+	struct clock_event_device *cd;
+	unsigned long nextstamp = 0L;
+	unsigned long reference;
+
+
+repeat:
+	for_each_online_cpu(cpu) {
+	    /*
+	     * Find virtual CPUs within the current VPE who have
+	     * unserviced timer requests whose time is now past.
+	     */
+	    local_irq_save(flags);
+	    mtflags = dmt();
+	    if (cpu_data[cpu].vpe_id == vpe &&
+		ISVALID(smtc_nexttime[vpe][cpu])) {
+		reference = (unsigned long)read_c0_count();
+		if ((smtc_nexttime[vpe][cpu] - reference)
+			 > (unsigned long)LONG_MAX) {
+			    smtc_nexttime[vpe][cpu] = 0L;
+			    emt(mtflags);
+			    local_irq_restore(flags);
+			    /*
+			     * We don't send IPIs to ourself.
+			     */
+			    if (cpu != smp_processor_id()) {
+				smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0);
+			    } else {
+				cd = &per_cpu(mips_clockevent_device, cpu);
+				cd->event_handler(cd);
+			    }
+		} else {
+			/* Local to VPE but Valid Time not yet reached. */
+			if (!ISVALID(nextstamp) ||
+			    IS_SOONER(smtc_nexttime[vpe][cpu], nextstamp,
+			    reference)) {
+				smtc_nextinvpe[vpe] = cpu;
+				nextstamp = smtc_nexttime[vpe][cpu];
+			}
+			emt(mtflags);
+			local_irq_restore(flags);
+		}
+	    } else {
+		emt(mtflags);
+		local_irq_restore(flags);
+
+	    }
+	}
+	/* Reprogram for interrupt at next soonest timestamp for VPE */
+	if (ISVALID(nextstamp)) {
+		write_c0_compare(nextstamp);
+		ehb();
+		if ((nextstamp - (unsigned long)read_c0_count())
+			> (unsigned long)LONG_MAX)
+				goto repeat;
+	}
+}
+
+
+irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
+{
+	int cpu = smp_processor_id();
+
+	/* If we're running SMTC, we've got MIPS MT and therefore MIPS32R2 */
+	handle_perf_irq(1);
+
+	if (read_c0_cause() & (1 << 30)) {
+		/* Clear Count/Compare Interrupt */
+		write_c0_compare(read_c0_compare());
+		smtc_distribute_timer(cpu_data[cpu].vpe_id);
+	}
+	return IRQ_HANDLED;
+}
+
+
+int __cpuinit mips_clockevent_init(void)
+{
+	uint64_t mips_freq = mips_hpt_frequency;
+	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *cd;
+	unsigned int irq;
+	int i;
+	int j;
+
+	if (!cpu_has_counter || !mips_hpt_frequency)
+		return -ENXIO;
+	if (cpu == 0) {
+		for (i = 0; i < num_possible_cpus(); i++) {
+			smtc_nextinvpe[i] = 0;
+			for (j = 0; j < num_possible_cpus(); j++)
+				smtc_nexttime[i][j] = 0L;
+		}
+		/*
+		 * SMTC also can't have the usablility test
+		 * run by secondary TCs once Compare is in use.
+		 */
+		if (!c0_compare_int_usable())
+			return -ENXIO;
+	}
+
+	/*
+	 * With vectored interrupts things are getting platform specific.
+	 * get_c0_compare_int is a hook to allow a platform to return the
+	 * interrupt number of it's liking.
+	 */
+	irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+	if (get_c0_compare_int)
+		irq = get_c0_compare_int();
+
+	cd = &per_cpu(mips_clockevent_device, cpu);
+
+	cd->name		= "MIPS";
+	cd->features		= CLOCK_EVT_FEAT_ONESHOT;
+
+	/* Calculate the min / max delta */
+	cd->mult	= div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
+	cd->shift		= 32;
+	cd->max_delta_ns	= clockevent_delta2ns(0x7fffffff, cd);
+	cd->min_delta_ns	= clockevent_delta2ns(0x300, cd);
+
+	cd->rating		= 300;
+	cd->irq			= irq;
+	cd->cpumask		= cpumask_of_cpu(cpu);
+	cd->set_next_event	= mips_next_event;
+	cd->set_mode		= mips_set_clock_mode;
+	cd->event_handler	= mips_event_handler;
+
+	clockevents_register_device(cd);
+
+	/*
+	 * On SMTC we only want to do the data structure
+	 * initialization and IRQ setup once.
+	 */
+	if (cpu)
+		return 0;
+	/*
+	 * And we need the hwmask associated with the c0_compare
+	 * vector to be initialized.
+	 */
+	irq_hwmask[irq] = (0x100 << cp0_compare_irq);
+	if (cp0_timer_irq_installed)
+		return 0;
+
+	cp0_timer_irq_installed = 1;
+
+	setup_irq(irq, &c0_compare_irqaction);
+
+	return 0;
+}
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 11c92dc53791..e621fda8ab37 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -54,14 +54,18 @@ extern void r4k_wait(void);
  * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
  * using this version a gamble.
  */
-static void r4k_wait_irqoff(void)
+void r4k_wait_irqoff(void)
 {
 	local_irq_disable();
 	if (!need_resched())
-		__asm__("	.set	mips3		\n"
+		__asm__("	.set	push		\n"
+			"	.set	mips3		\n"
 			"	wait			\n"
-			"	.set	mips0		\n");
+			"	.set	pop		\n");
 	local_irq_enable();
+	__asm__(" 	.globl __pastwait	\n"
+		"__pastwait:			\n");
+	return;
 }
 
 /*
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index f886dd7f708e..01dcbe38fa01 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -282,8 +282,8 @@ NESTED(except_vec_vi_handler, 0, sp)
 	and	t0, a0, t1
 #ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
 	mfc0	t2, CP0_TCCONTEXT
-	or	t0, t0, t2
-	mtc0	t0, CP0_TCCONTEXT
+	or	t2, t0, t2
+	mtc0	t2, CP0_TCCONTEXT
 #endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */
 	xor	t1, t1, t0
 	mtc0	t1, CP0_STATUS
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 39b491b9ad87..897fb2b4751c 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -1,4 +1,21 @@
-/* Copyright (C) 2004 Mips Technologies, Inc */
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * Copyright (C) 2004 Mips Technologies, Inc
+ * Copyright (C) 2008 Kevin D. Kissell
+ */
 
 #include <linux/clockchips.h>
 #include <linux/kernel.h>
@@ -21,7 +38,6 @@
 #include <asm/time.h>
 #include <asm/addrspace.h>
 #include <asm/smtc.h>
-#include <asm/smtc_ipi.h>
 #include <asm/smtc_proc.h>
 
 /*
@@ -58,11 +74,6 @@ unsigned long irq_hwmask[NR_IRQS];
 
 asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
 
-/*
- * Clock interrupt "latch" buffers, per "CPU"
- */
-
-static atomic_t ipi_timer_latch[NR_CPUS];
 
 /*
  * Number of InterProcessor Interrupt (IPI) message buffers to allocate
@@ -282,7 +293,7 @@ static void smtc_configure_tlb(void)
  * phys_cpu_present_map and the logical/physical mappings.
  */
 
-int __init mipsmt_build_cpu_map(int start_cpu_slot)
+int __init smtc_build_cpu_map(int start_cpu_slot)
 {
 	int i, ntcs;
 
@@ -325,7 +336,12 @@ static void smtc_tc_setup(int vpe, int tc, int cpu)
 	write_tc_c0_tcstatus((read_tc_c0_tcstatus()
 			& ~(TCSTATUS_TKSU | TCSTATUS_DA | TCSTATUS_IXMT))
 			| TCSTATUS_A);
-	write_tc_c0_tccontext(0);
+	/*
+	 * TCContext gets an offset from the base of the IPIQ array
+	 * to be used in low-level code to detect the presence of
+	 * an active IPI queue
+	 */
+	write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16);
 	/* Bind tc to vpe */
 	write_tc_c0_tcbind(vpe);
 	/* In general, all TCs should have the same cpu_data indications */
@@ -336,10 +352,18 @@ static void smtc_tc_setup(int vpe, int tc, int cpu)
 		cpu_data[cpu].options &= ~MIPS_CPU_FPU;
 	cpu_data[cpu].vpe_id = vpe;
 	cpu_data[cpu].tc_id = tc;
+	/* Multi-core SMTC hasn't been tested, but be prepared */
+	cpu_data[cpu].core = (read_vpe_c0_ebase() >> 1) & 0xff;
 }
 
+/*
+ * Tweak to get Count registes in as close a sync as possible.
+ * Value seems good for 34K-class cores.
+ */
+
+#define CP0_SKEW 8
 
-void mipsmt_prepare_cpus(void)
+void smtc_prepare_cpus(int cpus)
 {
 	int i, vpe, tc, ntc, nvpe, tcpervpe[NR_CPUS], slop, cpu;
 	unsigned long flags;
@@ -363,13 +387,13 @@ void mipsmt_prepare_cpus(void)
 		IPIQ[i].head = IPIQ[i].tail = NULL;
 		spin_lock_init(&IPIQ[i].lock);
 		IPIQ[i].depth = 0;
-		atomic_set(&ipi_timer_latch[i], 0);
 	}
 
 	/* cpu_data index starts at zero */
 	cpu = 0;
 	cpu_data[cpu].vpe_id = 0;
 	cpu_data[cpu].tc_id = 0;
+	cpu_data[cpu].core = (read_c0_ebase() >> 1) & 0xff;
 	cpu++;
 
 	/* Report on boot-time options */
@@ -484,7 +508,8 @@ void mipsmt_prepare_cpus(void)
 			write_vpe_c0_compare(0);
 			/* Propagate Config7 */
 			write_vpe_c0_config7(read_c0_config7());
-			write_vpe_c0_count(read_c0_count());
+			write_vpe_c0_count(read_c0_count() + CP0_SKEW);
+			ehb();
 		}
 		/* enable multi-threading within VPE */
 		write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() | VPECONTROL_TE);
@@ -585,24 +610,22 @@ void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle)
 
 void smtc_init_secondary(void)
 {
-	/*
-	 * Start timer on secondary VPEs if necessary.
-	 * plat_timer_setup has already have been invoked by init/main
-	 * on "boot" TC.  Like per_cpu_trap_init() hack, this assumes that
-	 * SMTC init code assigns TCs consdecutively and in ascending order
-	 * to across available VPEs.
-	 */
-	if (((read_c0_tcbind() & TCBIND_CURTC) != 0) &&
-	    ((read_c0_tcbind() & TCBIND_CURVPE)
-	    != cpu_data[smp_processor_id() - 1].vpe_id)){
-		write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
-	}
-
 	local_irq_enable();
 }
 
 void smtc_smp_finish(void)
 {
+	int cpu = smp_processor_id();
+
+	/*
+	 * Lowest-numbered CPU per VPE starts a clock tick.
+	 * Like per_cpu_trap_init() hack, this assumes that
+	 * SMTC init code assigns TCs consdecutively and
+	 * in ascending order across available VPEs.
+	 */
+	if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id))
+		write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
+
 	printk("TC %d going on-line as CPU %d\n",
 		cpu_data[smp_processor_id()].tc_id, smp_processor_id());
 }
@@ -755,6 +778,8 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
 	struct smtc_ipi *pipi;
 	unsigned long flags;
 	int mtflags;
+	unsigned long tcrestart;
+	extern void r4k_wait_irqoff(void), __pastwait(void);
 
 	if (cpu == smp_processor_id()) {
 		printk("Cannot Send IPI to self!\n");
@@ -771,8 +796,6 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
 	pipi->arg = (void *)action;
 	pipi->dest = cpu;
 	if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
-		if (type == SMTC_CLOCK_TICK)
-			atomic_inc(&ipi_timer_latch[cpu]);
 		/* If not on same VPE, enqueue and send cross-VPE interrupt */
 		smtc_ipi_nq(&IPIQ[cpu], pipi);
 		LOCK_CORE_PRA();
@@ -800,22 +823,29 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
 
 		if ((tcstatus & TCSTATUS_IXMT) != 0) {
 			/*
-			 * Spin-waiting here can deadlock,
-			 * so we queue the message for the target TC.
+			 * If we're in the the irq-off version of the wait
+			 * loop, we need to force exit from the wait and
+			 * do a direct post of the IPI.
+			 */
+			if (cpu_wait == r4k_wait_irqoff) {
+				tcrestart = read_tc_c0_tcrestart();
+				if (tcrestart >= (unsigned long)r4k_wait_irqoff
+				    && tcrestart < (unsigned long)__pastwait) {
+					write_tc_c0_tcrestart(__pastwait);
+					tcstatus &= ~TCSTATUS_IXMT;
+					write_tc_c0_tcstatus(tcstatus);
+					goto postdirect;
+				}
+			}
+			/*
+			 * Otherwise we queue the message for the target TC
+			 * to pick up when he does a local_irq_restore()
 			 */
 			write_tc_c0_tchalt(0);
 			UNLOCK_CORE_PRA();
-			/* Try to reduce redundant timer interrupt messages */
-			if (type == SMTC_CLOCK_TICK) {
-			    if (atomic_postincrement(&ipi_timer_latch[cpu])!=0){
-				smtc_ipi_nq(&freeIPIq, pipi);
-				return;
-			    }
-			}
 			smtc_ipi_nq(&IPIQ[cpu], pipi);
 		} else {
-			if (type == SMTC_CLOCK_TICK)
-				atomic_inc(&ipi_timer_latch[cpu]);
+postdirect:
 			post_direct_ipi(cpu, pipi);
 			write_tc_c0_tchalt(0);
 			UNLOCK_CORE_PRA();
@@ -883,7 +913,7 @@ static void ipi_call_interrupt(void)
 	smp_call_function_interrupt();
 }
 
-DECLARE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device);
+DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device);
 
 void ipi_decode(struct smtc_ipi *pipi)
 {
@@ -891,20 +921,13 @@ void ipi_decode(struct smtc_ipi *pipi)
 	struct clock_event_device *cd;
 	void *arg_copy = pipi->arg;
 	int type_copy = pipi->type;
-	int ticks;
-
 	smtc_ipi_nq(&freeIPIq, pipi);
 	switch (type_copy) {
 	case SMTC_CLOCK_TICK:
 		irq_enter();
 		kstat_this_cpu.irqs[MIPS_CPU_IRQ_BASE + 1]++;
-		cd = &per_cpu(smtc_dummy_clockevent_device, cpu);
-		ticks = atomic_read(&ipi_timer_latch[cpu]);
-		atomic_sub(ticks, &ipi_timer_latch[cpu]);
-		while (ticks) {
-			cd->event_handler(cd);
-			ticks--;
-		}
+		cd = &per_cpu(mips_clockevent_device, cpu);
+		cd->event_handler(cd);
 		irq_exit();
 		break;
 
@@ -937,24 +960,48 @@ void ipi_decode(struct smtc_ipi *pipi)
 	}
 }
 
+/*
+ * Similar to smtc_ipi_replay(), but invoked from context restore,
+ * so it reuses the current exception frame rather than set up a
+ * new one with self_ipi.
+ */
+
 void deferred_smtc_ipi(void)
 {
-	struct smtc_ipi *pipi;
-	unsigned long flags;
-/* DEBUG */
-	int q = smp_processor_id();
+	int cpu = smp_processor_id();
 
 	/*
 	 * Test is not atomic, but much faster than a dequeue,
 	 * and the vast majority of invocations will have a null queue.
+	 * If irq_disabled when this was called, then any IPIs queued
+	 * after we test last will be taken on the next irq_enable/restore.
+	 * If interrupts were enabled, then any IPIs added after the
+	 * last test will be taken directly.
 	 */
-	if (IPIQ[q].head != NULL) {
-		while((pipi = smtc_ipi_dq(&IPIQ[q])) != NULL) {
-			/* ipi_decode() should be called with interrupts off */
-			local_irq_save(flags);
+
+	while (IPIQ[cpu].head != NULL) {
+		struct smtc_ipi_q *q = &IPIQ[cpu];
+		struct smtc_ipi *pipi;
+		unsigned long flags;
+
+		/*
+		 * It may be possible we'll come in with interrupts
+		 * already enabled.
+		 */
+		local_irq_save(flags);
+
+		spin_lock(&q->lock);
+		pipi = __smtc_ipi_dq(q);
+		spin_unlock(&q->lock);
+		if (pipi != NULL)
 			ipi_decode(pipi);
-			local_irq_restore(flags);
-		}
+		/*
+		 * The use of the __raw_local restore isn't
+		 * as obviously necessary here as in smtc_ipi_replay(),
+		 * but it's more efficient, given that we're already
+		 * running down the IPI queue.
+		 */
+		__raw_local_irq_restore(flags);
 	}
 }
 
@@ -1066,55 +1113,53 @@ static void setup_cross_vpe_interrupts(unsigned int nvpe)
 
 /*
  * SMTC-specific hacks invoked from elsewhere in the kernel.
- *
- * smtc_ipi_replay is called from raw_local_irq_restore which is only ever
- * called with interrupts disabled.  We do rely on interrupts being disabled
- * here because using spin_lock_irqsave()/spin_unlock_irqrestore() would
- * result in a recursive call to raw_local_irq_restore().
  */
 
-static void __smtc_ipi_replay(void)
+ /*
+  * smtc_ipi_replay is called from raw_local_irq_restore
+  */
+
+void smtc_ipi_replay(void)
 {
 	unsigned int cpu = smp_processor_id();
 
 	/*
 	 * To the extent that we've ever turned interrupts off,
 	 * we may have accumulated deferred IPIs.  This is subtle.
-	 * If we use the smtc_ipi_qdepth() macro, we'll get an
-	 * exact number - but we'll also disable interrupts
-	 * and create a window of failure where a new IPI gets
-	 * queued after we test the depth but before we re-enable
-	 * interrupts. So long as IXMT never gets set, however,
 	 * we should be OK:  If we pick up something and dispatch
 	 * it here, that's great. If we see nothing, but concurrent
 	 * with this operation, another TC sends us an IPI, IXMT
 	 * is clear, and we'll handle it as a real pseudo-interrupt
-	 * and not a pseudo-pseudo interrupt.
+	 * and not a pseudo-pseudo interrupt.  The important thing
+	 * is to do the last check for queued message *after* the
+	 * re-enabling of interrupts.
 	 */
-	if (IPIQ[cpu].depth > 0) {
-		while (1) {
-			struct smtc_ipi_q *q = &IPIQ[cpu];
-			struct smtc_ipi *pipi;
-			extern void self_ipi(struct smtc_ipi *);
-
-			spin_lock(&q->lock);
-			pipi = __smtc_ipi_dq(q);
-			spin_unlock(&q->lock);
-			if (!pipi)
-				break;
+	while (IPIQ[cpu].head != NULL) {
+		struct smtc_ipi_q *q = &IPIQ[cpu];
+		struct smtc_ipi *pipi;
+		unsigned long flags;
 
+		/*
+		 * It's just possible we'll come in with interrupts
+		 * already enabled.
+		 */
+		local_irq_save(flags);
+
+		spin_lock(&q->lock);
+		pipi = __smtc_ipi_dq(q);
+		spin_unlock(&q->lock);
+		/*
+		 ** But use a raw restore here to avoid recursion.
+		 */
+		__raw_local_irq_restore(flags);
+
+		if (pipi) {
 			self_ipi(pipi);
 			smtc_cpu_stats[cpu].selfipis++;
 		}
 	}
 }
 
-void smtc_ipi_replay(void)
-{
-	raw_local_irq_disable();
-	__smtc_ipi_replay();
-}
-
 EXPORT_SYMBOL(smtc_ipi_replay);
 
 void smtc_idle_loop_hook(void)
@@ -1193,40 +1238,13 @@ void smtc_idle_loop_hook(void)
 		}
 	}
 
-	/*
-	 * Now that we limit outstanding timer IPIs, check for hung TC
-	 */
-	for (tc = 0; tc < NR_CPUS; tc++) {
-		/* Don't check ourself - we'll dequeue IPIs just below */
-		if ((tc != smp_processor_id()) &&
-		    atomic_read(&ipi_timer_latch[tc]) > timerq_limit) {
-		    if (clock_hang_reported[tc] == 0) {
-			pdb_msg += sprintf(pdb_msg,
-				"TC %d looks hung with timer latch at %d\n",
-				tc, atomic_read(&ipi_timer_latch[tc]));
-			clock_hang_reported[tc]++;
-			}
-		}
-	}
 	emt(mtflags);
 	local_irq_restore(flags);
 	if (pdb_msg != &id_ho_db_msg[0])
 		printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg);
 #endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
 
-	/*
-	 * Replay any accumulated deferred IPIs. If "Instant Replay"
-	 * is in use, there should never be any.
-	 */
-#ifndef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY
-	{
-		unsigned long flags;
-
-		local_irq_save(flags);
-		__smtc_ipi_replay();
-		local_irq_restore(flags);
-	}
-#endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */
+	smtc_ipi_replay();
 }
 
 void smtc_soft_dump(void)
@@ -1242,10 +1260,6 @@ void smtc_soft_dump(void)
 		printk("%d: %ld\n", i, smtc_cpu_stats[i].selfipis);
 	}
 	smtc_ipi_qdump();
-	printk("Timer IPI Backlogs:\n");
-	for (i=0; i < NR_CPUS; i++) {
-		printk("%d: %d\n", i, atomic_read(&ipi_timer_latch[i]));
-	}
 	printk("%d Recoveries of \"stolen\" FPU\n",
 	       atomic_read(&smtc_fpu_recoveries));
 }
diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c
index 5ea705e49454..f84a46a8ae6e 100644
--- a/arch/mips/mti-malta/malta-smtc.c
+++ b/arch/mips/mti-malta/malta-smtc.c
@@ -84,12 +84,17 @@ static void msmtc_cpus_done(void)
 
 static void __init msmtc_smp_setup(void)
 {
-	mipsmt_build_cpu_map(0);
+	/*
+	 * we won't get the definitive value until
+	 * we've run smtc_prepare_cpus later, but
+	 * we would appear to need an upper bound now.
+	 */
+	smp_num_siblings = smtc_build_cpu_map(0);
 }
 
 static void __init msmtc_prepare_cpus(unsigned int max_cpus)
 {
-	mipsmt_prepare_cpus();
+	smtc_prepare_cpus(max_cpus);
 }
 
 struct plat_smp_ops msmtc_smp_ops = {
diff --git a/include/asm-mips/cevt-r4k.h b/include/asm-mips/cevt-r4k.h
new file mode 100644
index 000000000000..fa4328f9124f
--- /dev/null
+++ b/include/asm-mips/cevt-r4k.h
@@ -0,0 +1,46 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Kevin D. Kissell
+ */
+
+/*
+ * Definitions used for common event timer implementation
+ * for MIPS 4K-type processors and their MIPS MT variants.
+ * Avoids unsightly extern declarations in C files.
+ */
+#ifndef __ASM_CEVT_R4K_H
+#define __ASM_CEVT_R4K_H
+
+DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device);
+
+void mips_event_handler(struct clock_event_device *dev);
+int c0_compare_int_usable(void);
+void mips_set_clock_mode(enum clock_event_mode, struct clock_event_device *);
+irqreturn_t c0_compare_interrupt(int, void *);
+
+extern struct irqaction c0_compare_irqaction;
+extern int cp0_timer_irq_installed;
+
+/*
+ * Possibly handle a performance counter interrupt.
+ * Return true if the timer interrupt should not be checked
+ */
+
+static inline int handle_perf_irq(int r2)
+{
+	/*
+	 * The performance counter overflow interrupt may be shared with the
+	 * timer interrupt (cp0_perfcount_irq < 0). If it is and a
+	 * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
+	 * and we can't reliably determine if a counter interrupt has also
+	 * happened (!r2) then don't check for a timer interrupt.
+	 */
+	return (cp0_perfcount_irq < 0) &&
+		perf_irq() == IRQ_HANDLED &&
+		!r2;
+}
+
+#endif /* __ASM_CEVT_R4K_H */
diff --git a/include/asm-mips/irqflags.h b/include/asm-mips/irqflags.h
index 881e8866501d..701ec0ba8fa9 100644
--- a/include/asm-mips/irqflags.h
+++ b/include/asm-mips/irqflags.h
@@ -38,8 +38,17 @@ __asm__(
 	"	.set	pop						\n"
 	"	.endm");
 
+extern void smtc_ipi_replay(void);
+
 static inline void raw_local_irq_enable(void)
 {
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC kernel needs to do a software replay of queued
+	 * IPIs, at the cost of call overhead on each local_irq_enable()
+	 */
+	smtc_ipi_replay();
+#endif
 	__asm__ __volatile__(
 		"raw_local_irq_enable"
 		: /* no outputs */
@@ -47,6 +56,7 @@ static inline void raw_local_irq_enable(void)
 		: "memory");
 }
 
+
 /*
  * For cli() we have to insert nops to make sure that the new value
  * has actually arrived in the status register before the end of this
@@ -185,15 +195,14 @@ __asm__(
 	"	.set	pop						\n"
 	"	.endm							\n");
 
-extern void smtc_ipi_replay(void);
 
 static inline void raw_local_irq_restore(unsigned long flags)
 {
 	unsigned long __tmp1;
 
-#ifdef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY
+#ifdef CONFIG_MIPS_MT_SMTC
 	/*
-	 * CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY does prompt replay of deferred
+	 * SMTC kernel needs to do a software replay of queued
 	 * IPIs, at the cost of branch and call overhead on each
 	 * local_irq_restore()
 	 */
@@ -208,6 +217,17 @@ static inline void raw_local_irq_restore(unsigned long flags)
 		: "memory");
 }
 
+static inline void __raw_local_irq_restore(unsigned long flags)
+{
+	unsigned long __tmp1;
+
+	__asm__ __volatile__(
+		"raw_local_irq_restore\t%0"
+		: "=r" (__tmp1)
+		: "0" (flags)
+		: "memory");
+}
+
 static inline int raw_irqs_disabled_flags(unsigned long flags)
 {
 #ifdef CONFIG_MIPS_MT_SMTC
diff --git a/include/asm-mips/smtc.h b/include/asm-mips/smtc.h
index 3639b28f80db..ea60bf08dcb0 100644
--- a/include/asm-mips/smtc.h
+++ b/include/asm-mips/smtc.h
@@ -6,6 +6,7 @@
  */
 
 #include <asm/mips_mt.h>
+#include <asm/smtc_ipi.h>
 
 /*
  * System-wide SMTC status information
@@ -38,14 +39,15 @@ struct mm_struct;
 struct task_struct;
 
 void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu);
-
+void self_ipi(struct smtc_ipi *);
 void smtc_flush_tlb_asid(unsigned long asid);
-extern int mipsmt_build_cpu_map(int startslot);
-extern void mipsmt_prepare_cpus(void);
+extern int smtc_build_cpu_map(int startslot);
+extern void smtc_prepare_cpus(int cpus);
 extern void smtc_smp_finish(void);
 extern void smtc_boot_secondary(int cpu, struct task_struct *t);
 extern void smtc_cpus_done(void);
 
+
 /*
  * Sharing the TLB between multiple VPEs means that the
  * "random" index selection function is not allowed to
-- 
cgit v1.2.3


From d3d238c7744d08c36a114a59cb537d4c0c6c9a86 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 3 Oct 2008 21:54:59 +0200
Subject: [S390] nohz: Fix __udelay.

This fixes a regression that came with 934b2857cc576ae53c92a66e63fce7ddcfa74691
("[S390] nohz/sclp: disable timer on synchronous waits.").
If udelay() gets called from a disabled context it sets the clock comparator
to a value where it expects the next interrupt. When the interrupt happens
the clock comparator gets not reset and therefore the interrupt condition
doesn't get cleared. The result is an endless timer interrupt loop.

In addition this patch fixes also the following:

rcutorture reveals that our __udelay implementation is still buggy,
since it might schedule tasklets, but prevents their execution:

NOHZ: local_softirq_pending 42
NOHZ: local_softirq_pending 02
NOHZ: local_softirq_pending 142
NOHZ: local_softirq_pending 02

To fix this we make sure that only the clock comparator interrupt
is enabled when the enabled wait psw is loaded.
Also no code gets called anymore which might schedule tasklets.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/time.c |  2 ++
 arch/s390/lib/delay.c   | 88 ++++++++++++++++++++++++++++++-------------------
 2 files changed, 56 insertions(+), 34 deletions(-)

diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index ca114fe46ffb..06acb1a18bbc 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -169,6 +169,8 @@ void init_cpu_timer(void)
 
 static void clock_comparator_interrupt(__u16 code)
 {
+	if (S390_lowcore.clock_comparator == -1ULL)
+		set_clock_comparator(S390_lowcore.clock_comparator);
 }
 
 static void etr_timing_alert(struct etr_irq_parm *);
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index fc6ab6094df8..0953cee05efc 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -1,14 +1,9 @@
 /*
- *  arch/s390/lib/delay.c
  *    Precise Delay Loops for S390
  *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
- *
- *  Derived from "arch/i386/lib/delay.c"
- *    Copyright (C) 1993 Linus Torvalds
- *    Copyright (C) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ *    Copyright IBM Corp. 1999,2008
+ *    Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ *		 Heiko Carstens <heiko.carstens@de.ibm.com>,
  */
 
 #include <linux/sched.h>
@@ -29,30 +24,31 @@ void __delay(unsigned long loops)
 	asm volatile("0: brct %0,0b" : : "d" ((loops/2) + 1));
 }
 
-/*
- * Waits for 'usecs' microseconds using the TOD clock comparator.
- */
-void __udelay(unsigned long usecs)
+static void __udelay_disabled(unsigned long usecs)
 {
-	u64 end, time, old_cc = 0;
-	unsigned long flags, cr0, mask, dummy;
-	int irq_context;
+	unsigned long mask, cr0, cr0_saved;
+	u64 clock_saved;
 
-	irq_context = in_interrupt();
-	if (!irq_context)
-		local_bh_disable();
-	local_irq_save(flags);
-	if (raw_irqs_disabled_flags(flags)) {
-		old_cc = local_tick_disable();
-		S390_lowcore.clock_comparator = -1ULL;
-		__ctl_store(cr0, 0, 0);
-		dummy = (cr0 & 0xffff00e0) | 0x00000800;
-		__ctl_load(dummy , 0, 0);
-		mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
-	} else
-		mask = psw_kernel_bits | PSW_MASK_WAIT |
-			PSW_MASK_EXT | PSW_MASK_IO;
+	clock_saved = local_tick_disable();
+	set_clock_comparator(get_clock() + ((u64) usecs << 12));
+	__ctl_store(cr0_saved, 0, 0);
+	cr0 = (cr0_saved & 0xffff00e0) | 0x00000800;
+	__ctl_load(cr0 , 0, 0);
+	mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
+	trace_hardirqs_on();
+	__load_psw_mask(mask);
+	local_irq_disable();
+	__ctl_load(cr0_saved, 0, 0);
+	local_tick_enable(clock_saved);
+	set_clock_comparator(S390_lowcore.clock_comparator);
+}
 
+static void __udelay_enabled(unsigned long usecs)
+{
+	unsigned long mask;
+	u64 end, time;
+
+	mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT | PSW_MASK_IO;
 	end = get_clock() + ((u64) usecs << 12);
 	do {
 		time = end < S390_lowcore.clock_comparator ?
@@ -62,13 +58,37 @@ void __udelay(unsigned long usecs)
 		__load_psw_mask(mask);
 		local_irq_disable();
 	} while (get_clock() < end);
+	set_clock_comparator(S390_lowcore.clock_comparator);
+}
 
-	if (raw_irqs_disabled_flags(flags)) {
-		__ctl_load(cr0, 0, 0);
-		local_tick_enable(old_cc);
+/*
+ * Waits for 'usecs' microseconds using the TOD clock comparator.
+ */
+void __udelay(unsigned long usecs)
+{
+	unsigned long flags;
+
+	preempt_disable();
+	local_irq_save(flags);
+	if (in_irq()) {
+		__udelay_disabled(usecs);
+		goto out;
+	}
+	if (in_softirq()) {
+		if (raw_irqs_disabled_flags(flags))
+			__udelay_disabled(usecs);
+		else
+			__udelay_enabled(usecs);
+		goto out;
 	}
-	if (!irq_context)
+	if (raw_irqs_disabled_flags(flags)) {
+		local_bh_disable();
+		__udelay_disabled(usecs);
 		_local_bh_enable();
-	set_clock_comparator(S390_lowcore.clock_comparator);
+		goto out;
+	}
+	__udelay_enabled(usecs);
+out:
 	local_irq_restore(flags);
+	preempt_enable();
 }
-- 
cgit v1.2.3


From 75f6276187e5ce5a312a0619fba2fe56c9290b48 Mon Sep 17 00:00:00 2001
From: Jan Glauber <jang@linux.vnet.ibm.com>
Date: Fri, 3 Oct 2008 21:55:00 +0200
Subject: [S390] qdio: prevent stack clobber

Don't print more information than fits into the string on the
stack. Combine the informational output of qdio to fit into
one line.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/cio/qdio_setup.c | 55 ++++++++++++++++---------------------------
 1 file changed, 20 insertions(+), 35 deletions(-)

diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c
index 1679e2f91c94..a0b6b46e7466 100644
--- a/drivers/s390/cio/qdio_setup.c
+++ b/drivers/s390/cio/qdio_setup.c
@@ -447,51 +447,36 @@ void qdio_print_subchannel_info(struct qdio_irq *irq_ptr,
 {
 	char s[80];
 
-	sprintf(s, "%s sc:%x ", cdev->dev.bus_id, irq_ptr->schid.sch_no);
-
+	sprintf(s, "qdio: %s ", dev_name(&cdev->dev));
 	switch (irq_ptr->qib.qfmt) {
 	case QDIO_QETH_QFMT:
-		sprintf(s + strlen(s), "OSADE ");
+		sprintf(s + strlen(s), "OSA ");
 		break;
 	case QDIO_ZFCP_QFMT:
 		sprintf(s + strlen(s), "ZFCP ");
 		break;
 	case QDIO_IQDIO_QFMT:
-		sprintf(s + strlen(s), "HiperSockets ");
+		sprintf(s + strlen(s), "HS ");
 		break;
 	}
-	sprintf(s + strlen(s), "using: ");
-
-	if (!is_thinint_irq(irq_ptr))
-		sprintf(s + strlen(s), "no");
-	sprintf(s + strlen(s), "AdapterInterrupts ");
-	if (!(irq_ptr->sch_token != 0))
-		sprintf(s + strlen(s), "no");
-	sprintf(s + strlen(s), "QEBSM ");
-	if (!(irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED))
-		sprintf(s + strlen(s), "no");
-	sprintf(s + strlen(s), "OutboundPCI ");
-	if (!css_general_characteristics.aif_tdd)
-		sprintf(s + strlen(s), "no");
-	sprintf(s + strlen(s), "TDD\n");
-	printk(KERN_INFO "qdio: %s", s);
-
-	memset(s, 0, sizeof(s));
-	sprintf(s, "%s SIGA required: ", cdev->dev.bus_id);
-	if (irq_ptr->siga_flag.input)
-		sprintf(s + strlen(s), "Read ");
-	if (irq_ptr->siga_flag.output)
-		sprintf(s + strlen(s), "Write ");
-	if (irq_ptr->siga_flag.sync)
-		sprintf(s + strlen(s), "Sync ");
-	if (!irq_ptr->siga_flag.no_sync_ti)
-		sprintf(s + strlen(s), "SyncAI ");
-	if (!irq_ptr->siga_flag.no_sync_out_ti)
-		sprintf(s + strlen(s), "SyncOutAI ");
-	if (!irq_ptr->siga_flag.no_sync_out_pci)
-		sprintf(s + strlen(s), "SyncOutPCI");
+	sprintf(s + strlen(s), "on SC %x using ", irq_ptr->schid.sch_no);
+	sprintf(s + strlen(s), "AI:%d ", is_thinint_irq(irq_ptr));
+	sprintf(s + strlen(s), "QEBSM:%d ", (irq_ptr->sch_token) ? 1 : 0);
+	sprintf(s + strlen(s), "PCI:%d ",
+		(irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED) ? 1 : 0);
+	sprintf(s + strlen(s), "TDD:%d ", css_general_characteristics.aif_tdd);
+	sprintf(s + strlen(s), "SIGA:");
+	sprintf(s + strlen(s), "%s", (irq_ptr->siga_flag.input) ? "R" : " ");
+	sprintf(s + strlen(s), "%s", (irq_ptr->siga_flag.output) ? "W" : " ");
+	sprintf(s + strlen(s), "%s", (irq_ptr->siga_flag.sync) ? "S" : " ");
+	sprintf(s + strlen(s), "%s",
+		(!irq_ptr->siga_flag.no_sync_ti) ? "A" : " ");
+	sprintf(s + strlen(s), "%s",
+		(!irq_ptr->siga_flag.no_sync_out_ti) ? "O" : " ");
+	sprintf(s + strlen(s), "%s",
+		(!irq_ptr->siga_flag.no_sync_out_pci) ? "P" : " ");
 	sprintf(s + strlen(s), "\n");
-	printk(KERN_INFO "qdio: %s", s);
+	printk(KERN_INFO "%s", s);
 }
 
 int __init qdio_setup_init(void)
-- 
cgit v1.2.3


From 96d746c68fae9a1e3167caab04c22fd0f677f62d Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 3 Oct 2008 13:38:07 -0700
Subject: Fix init/main.c to use regular printk with '%pF' for initcall fn

.. small detail, but the silly e1000e initcall warning debugging caused
me to look at this code.  Rather than gouge my eyes out with a spoon, I
just fixed it.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 init/main.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/init/main.c b/init/main.c
index f6f7042331dc..3820323c4c84 100644
--- a/init/main.c
+++ b/init/main.c
@@ -708,7 +708,7 @@ int do_one_initcall(initcall_t fn)
 	int result;
 
 	if (initcall_debug) {
-		print_fn_descriptor_symbol("calling  %s\n", fn);
+		printk("calling  %pF\n", fn);
 		t0 = ktime_get();
 	}
 
@@ -718,8 +718,8 @@ int do_one_initcall(initcall_t fn)
 		t1 = ktime_get();
 		delta = ktime_sub(t1, t0);
 
-		print_fn_descriptor_symbol("initcall %s", fn);
-		printk(" returned %d after %Ld msecs\n", result,
+		printk("initcall %pF returned %d after %Ld msecs\n",
+			fn, result,
 			(unsigned long long) delta.tv64 >> 20);
 	}
 
@@ -737,8 +737,7 @@ int do_one_initcall(initcall_t fn)
 		local_irq_enable();
 	}
 	if (msgbuf[0]) {
-		print_fn_descriptor_symbol(KERN_WARNING "initcall %s", fn);
-		printk(" returned with %s\n", msgbuf);
+		printk("initcall %pF returned with %s\n", fn, msgbuf);
 	}
 
 	return result;
-- 
cgit v1.2.3


From cc65f1ec192dc54de57483194502e9fa00934c39 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Fri, 3 Oct 2008 13:00:56 -0700
Subject: x86 setup: correct segfault in generation of 32-bit reloc kernel

Impact: segfault on build of a 32-bit relocatable kernel

When converting arch/x86/boot/compressed/relocs.c to support unlimited
sections, the computation of sym_strtab in walk_relocs() was done
incorrectly.  This causes a segfault for some people when building the
relocatable 32-bit kernel.

Pointed out by Anonymous <pageexec@freemail.hu>.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/boot/compressed/relocs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/boot/compressed/relocs.c b/arch/x86/boot/compressed/relocs.c
index a1310c52fc0c..857e492c571e 100644
--- a/arch/x86/boot/compressed/relocs.c
+++ b/arch/x86/boot/compressed/relocs.c
@@ -492,7 +492,7 @@ static void walk_relocs(void (*visit)(Elf32_Rel *rel, Elf32_Sym *sym))
 			continue;
 		}
 		sh_symtab = sec_symtab->symtab;
-		sym_strtab = sec->link->strtab;
+		sym_strtab = sec_symtab->link->strtab;
 		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) {
 			Elf32_Rel *rel;
 			Elf32_Sym *sym;
-- 
cgit v1.2.3


From 3040a6d5a2655c7967bd42b5fb4903d48daa747f Mon Sep 17 00:00:00 2001
From: Paul Moore <paul.moore@hp.com>
Date: Fri, 3 Oct 2008 10:51:15 -0400
Subject: selinux: Fix an uninitialized variable BUG/panic in
 selinux_secattr_to_sid()

At some point during the 2.6.27 development cycle two new fields were added
to the SELinux context structure, a string pointer and a length field.  The
code in selinux_secattr_to_sid() was not modified and as a result these two
fields were left uninitialized which could result in erratic behavior,
including kernel panics, when NetLabel is used.  This patch fixes the
problem by fully initializing the context in selinux_secattr_to_sid() before
use and reducing the level of direct context manipulation done to help
prevent future problems.

Please apply this to the 2.6.27-rcX release stream.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
---
 security/selinux/ss/services.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index d11a8154500f..8551952ef329 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -2737,6 +2737,7 @@ int security_netlbl_secattr_to_sid(struct netlbl_lsm_secattr *secattr,
 		if (ctx == NULL)
 			goto netlbl_secattr_to_sid_return;
 
+		context_init(&ctx_new);
 		ctx_new.user = ctx->user;
 		ctx_new.role = ctx->role;
 		ctx_new.type = ctx->type;
@@ -2745,13 +2746,9 @@ int security_netlbl_secattr_to_sid(struct netlbl_lsm_secattr *secattr,
 			if (ebitmap_netlbl_import(&ctx_new.range.level[0].cat,
 						  secattr->attr.mls.cat) != 0)
 				goto netlbl_secattr_to_sid_return;
-			ctx_new.range.level[1].cat.highbit =
-				ctx_new.range.level[0].cat.highbit;
-			ctx_new.range.level[1].cat.node =
-				ctx_new.range.level[0].cat.node;
-		} else {
-			ebitmap_init(&ctx_new.range.level[0].cat);
-			ebitmap_init(&ctx_new.range.level[1].cat);
+			memcpy(&ctx_new.range.level[1].cat,
+			       &ctx_new.range.level[0].cat,
+			       sizeof(ctx_new.range.level[0].cat));
 		}
 		if (mls_context_isvalid(&policydb, &ctx_new) != 1)
 			goto netlbl_secattr_to_sid_return_cleanup;
-- 
cgit v1.2.3


From 2e4a75cdcb89ff53bb182dda3a6dcdc14befe007 Mon Sep 17 00:00:00 2001
From: Marcin Slusarz <marcin.slusarz@gmail.com>
Date: Fri, 3 Oct 2008 15:23:36 -0700
Subject: rtc: fix kernel panic on second use of SIGIO nofitication

When userspace uses SIGIO notification and forgets to disable it before
closing file descriptor, rtc->async_queue contains stale pointer to struct
file.  When user space enables again SIGIO notification in different
process, kernel dereferences this (poisoned) pointer and crashes.

So disable SIGIO notification on close.

Kernel panic:
(second run of qemu (requires echo 1024 > /sys/class/rtc/rtc0/max_user_freq))

general protection fault: 0000 [1] PREEMPT
CPU 0
Modules linked in: af_packet snd_pcm_oss snd_mixer_oss snd_seq_oss snd_seq_midi_event snd_seq usbhid tuner tea5767 tda8290 tuner_xc2028 xc5000 tda9887 tuner_simple tuner_types mt20xx tea5761 tda9875 uhci_hcd ehci_hcd usbcore bttv snd_via82xx snd_ac97_codec ac97_bus snd_pcm snd_timer ir_common compat_ioctl32 snd_page_alloc videodev v4l1_compat snd_mpu401_uart snd_rawmidi v4l2_common videobuf_dma_sg videobuf_core snd_seq_device snd btcx_risc soundcore tveeprom i2c_viapro
Pid: 5781, comm: qemu-system-x86 Not tainted 2.6.27-rc6 #363
RIP: 0010:[<ffffffff8024f891>]  [<ffffffff8024f891>] __lock_acquire+0x3db/0x73f
RSP: 0000:ffffffff80674cb8  EFLAGS: 00010002
RAX: ffff8800224c62f0 RBX: 0000000000000046 RCX: 0000000000000002
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800224c62f0
RBP: ffffffff80674d08 R08: 0000000000000002 R09: 0000000000000001
R10: ffffffff80238941 R11: 0000000000000001 R12: 0000000000000000
R13: 6b6b6b6b6b6b6b6b R14: ffff88003a450080 R15: 0000000000000000
FS:  00007f98b69516f0(0000) GS:ffffffff80623200(0000) knlGS:00000000f7cc86d0
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000a87000 CR3: 0000000022598000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process qemu-system-x86 (pid: 5781, threadinfo ffff880028812000, task ffff88003a450080)
Stack:  ffffffff80674cf8 0000000180238440 0000000200000002 0000000000000000
 ffff8800224c62f0 0000000000000046 0000000000000000 0000000000000002
 0000000000000002 0000000000000000 ffffffff80674d68 ffffffff8024fc7a
Call Trace:
 <IRQ>  [<ffffffff8024fc7a>] lock_acquire+0x85/0xa9
 [<ffffffff8029cb62>] ? send_sigio+0x2a/0x184
 [<ffffffff80491d1f>] _read_lock+0x3e/0x4a
 [<ffffffff8029cb62>] ? send_sigio+0x2a/0x184
 [<ffffffff8029cb62>] send_sigio+0x2a/0x184
 [<ffffffff8024fb97>] ? __lock_acquire+0x6e1/0x73f
 [<ffffffff8029cd4d>] ? kill_fasync+0x2c/0x4e
 [<ffffffff8029cd10>] __kill_fasync+0x54/0x65
 [<ffffffff8029cd5b>] kill_fasync+0x3a/0x4e
 [<ffffffff80402896>] rtc_update_irq+0x9c/0xa5
 [<ffffffff80404640>] cmos_interrupt+0xae/0xc0
 [<ffffffff8025d1c1>] handle_IRQ_event+0x25/0x5a
 [<ffffffff8025e5e4>] handle_edge_irq+0xdd/0x123
 [<ffffffff8020da34>] do_IRQ+0xe4/0x144
 [<ffffffff8020bad6>] ret_from_intr+0x0/0xf
 <EOI>  [<ffffffff8026fdc2>] ? __alloc_pages_internal+0xe7/0x3ad
 [<ffffffff8033fe67>] ? clear_page_c+0x7/0x10
 [<ffffffff8026fc10>] ? get_page_from_freelist+0x385/0x450
 [<ffffffff8026fdc2>] ? __alloc_pages_internal+0xe7/0x3ad
 [<ffffffff80280aac>] ? anon_vma_prepare+0x2e/0xf6
 [<ffffffff80279400>] ? handle_mm_fault+0x227/0x6a5
 [<ffffffff80494716>] ? do_page_fault+0x494/0x83f
 [<ffffffff8049251d>] ? error_exit+0x0/0xa9

Code: cc 41 39 45 28 74 24 e8 5e 1d 0f 00 85 c0 0f 84 6a 03 00 00 83 3d 8f a9 aa 00 00 be 47 03 00 00 0f 84 6a 02 00 00 e9 53 03 00 00 <41> ff 85 38 01 00 00 45 8b be 90 06 00 00 41 83 ff 2f 76 24 e8
RIP  [<ffffffff8024f891>] __lock_acquire+0x3db/0x73f
 RSP <ffffffff80674cb8>
---[ end trace 431877d860448760 ]---
Kernel panic - not syncing: Aiee, killing interrupt handler!

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-dev.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index f118252f3a9f..52e2743b04ec 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -422,6 +422,12 @@ done:
 	return err;
 }
 
+static int rtc_dev_fasync(int fd, struct file *file, int on)
+{
+	struct rtc_device *rtc = file->private_data;
+	return fasync_helper(fd, file, on, &rtc->async_queue);
+}
+
 static int rtc_dev_release(struct inode *inode, struct file *file)
 {
 	struct rtc_device *rtc = file->private_data;
@@ -434,16 +440,13 @@ static int rtc_dev_release(struct inode *inode, struct file *file)
 	if (rtc->ops->release)
 		rtc->ops->release(rtc->dev.parent);
 
+	if (file->f_flags & FASYNC)
+		rtc_dev_fasync(-1, file, 0);
+
 	clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags);
 	return 0;
 }
 
-static int rtc_dev_fasync(int fd, struct file *file, int on)
-{
-	struct rtc_device *rtc = file->private_data;
-	return fasync_helper(fd, file, on, &rtc->async_queue);
-}
-
 static const struct file_operations rtc_dev_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
-- 
cgit v1.2.3


From aef7db4bd5a3b6068dfa05919a3d685199eed116 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Fri, 3 Oct 2008 15:23:38 -0700
Subject: fbdev: fix recursive notifier and locking when fbdev console is
 blanked

Fix infinite recursive notifier in the fbdev layer.  This causes recursive
locking.  Dmitry Baryshkov found the problem and confirmed that the patch
fixes the bug.

After doing
# echo 1 > /sys/class/graphics/fb0/blank
I got the following in my kernel log:

=============================================
[ INFO: possible recursive locking detected ]
2.6.27-rc6-00086-gda63874-dirty #97
---------------------------------------------
echo/1564 is trying to acquire lock:
 ((fb_notifier_list).rwsem){..--}, at: [<c005a384>] __blocking_notifier_call_chain+0x38/0x6c

but task is already holding lock:
 ((fb_notifier_list).rwsem){..--}, at: [<c005a384>] __blocking_notifier_call_chain+0x38/0x6c

other info that might help us debug this:
2 locks held by echo/1564:
 #0:  (&buffer->mutex){--..}, at: [<c00ddde0>] sysfs_write_file+0x30/0x80
 #1:  ((fb_notifier_list).rwsem){..--}, at: [<c005a384>] __blocking_notifier_call_chain+0x38/0x6c

stack backtrace:
[<c0029fe4>] (dump_stack+0x0/0x14) from [<c0060ce0>] (print_deadlock_bug+0xa4/0xd0)
[<c0060c3c>] (print_deadlock_bug+0x0/0xd0) from [<c0060e54>] (check_deadlock+0x148/0x17c)
 r6:c397a1e0 r5:c397a530 r4:c04fcf98
[<c0060d0c>] (check_deadlock+0x0/0x17c) from [<c00637e8>] (validate_chain+0x3c4/0x4f0)
[<c0063424>] (validate_chain+0x0/0x4f0) from [<c0063efc>] (__lock_acquire+0x5e8/0x6b4)
[<c0063914>] (__lock_acquire+0x0/0x6b4) from [<c006402c>] (lock_acquire+0x64/0x78)
[<c0063fc8>] (lock_acquire+0x0/0x78) from [<c0316ca8>] (down_read+0x4c/0x60)
 r7:00000009 r6:ffffffff r5:c0427a40 r4:c005a384
[<c0316c5c>] (down_read+0x0/0x60) from [<c005a384>] (__blocking_notifier_call_chain+0x38/0x6c)
 r5:c0427a40 r4:c0427a74
[<c005a34c>] (__blocking_notifier_call_chain+0x0/0x6c) from [<c005a3d8>] (blocking_notifier_call_chain+0x20/0x28)
 r8:00000009 r7:c086d640 r6:c3967940 r5:00000000 r4:c38984b8
[<c005a3b8>] (blocking_notifier_call_chain+0x0/0x28) from [<c014baa0>] (fb_notifier_call_chain+0x1c/0x24)
[<c014ba84>] (fb_notifier_call_chain+0x0/0x24) from [<c014c18c>] (fb_blank+0x64/0x70)
[<c014c128>] (fb_blank+0x0/0x70) from [<c0155978>] (fbcon_blank+0x114/0x1bc)
 r5:00000001 r4:c38984b8
[<c0155864>] (fbcon_blank+0x0/0x1bc) from [<c0170ea8>] (do_blank_screen+0x1e0/0x2a0)
[<c0170cc8>] (do_blank_screen+0x0/0x2a0) from [<c0154024>] (fbcon_fb_blanked+0x74/0x94)
 r5:c3967940 r4:00000001
[<c0153fb0>] (fbcon_fb_blanked+0x0/0x94) from [<c0154228>] (fbcon_event_notify+0x100/0x12c)
 r5:fffffffe r4:c39bc194
[<c0154128>] (fbcon_event_notify+0x0/0x12c) from [<c005a0d4>] (notifier_call_chain+0x38/0x7c)
[<c005a09c>] (notifier_call_chain+0x0/0x7c) from [<c005a3a0>] (__blocking_notifier_call_chain+0x54/0x6c)
 r8:c3b51ea0 r7:00000009 r6:ffffffff r5:c0427a40 r4:c0427a74
[<c005a34c>] (__blocking_notifier_call_chain+0x0/0x6c) from [<c005a3d8>] (blocking_notifier_call_chain+0x20/0x28)
 r8:00000001 r7:c3a7e000 r6:00000000 r5:00000000 r4:c38984b8
[<c005a3b8>] (blocking_notifier_call_chain+0x0/0x28) from [<c014baa0>] (fb_notifier_call_chain+0x1c/0x24)
[<c014ba84>] (fb_notifier_call_chain+0x0/0x24) from [<c014c18c>] (fb_blank+0x64/0x70)
[<c014c128>] (fb_blank+0x0/0x70) from [<c014e450>] (store_blank+0x54/0x7c)
 r5:c38984b8 r4:c3b51ec4
[<c014e3fc>] (store_blank+0x0/0x7c) from [<c017981c>] (dev_attr_store+0x28/0x2c)
 r8:00000001 r7:c042bf80 r6:c39eba10 r5:c3967c30 r4:c38e0140
[<c01797f4>] (dev_attr_store+0x0/0x2c) from [<c00ddaac>] (flush_write_buffer+0x54/0x68)
[<c00dda58>] (flush_write_buffer+0x0/0x68) from [<c00dde08>] (sysfs_write_file+0x58/0x80)
 r8:c3b51f78 r7:c3bcb070 r6:c39eba10 r5:00000001 r4:00000001
[<c00dddb0>] (sysfs_write_file+0x0/0x80) from [<c009de04>] (vfs_write+0xb8/0x148)
[<c009dd4c>] (vfs_write+0x0/0x148) from [<c009e384>] (sys_write+0x44/0x70)
 r7:00000004 r6:c3bcb070 r5:00000000 r4:00000000
[<c009e340>] (sys_write+0x0/0x70) from [<c0025d00>] (ret_fast_syscall+0x0/0x2c)
 r6:4001b000 r5:00000001 r4:401dc658

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reported-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Testted-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/console/fbcon.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index c6299e8a041d..9cbff84b787d 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -2400,11 +2400,15 @@ static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch)
 
  	if (!fbcon_is_inactive(vc, info)) {
 		if (ops->blank_state != blank) {
+			int ret = 1;
+
 			ops->blank_state = blank;
 			fbcon_cursor(vc, blank ? CM_ERASE : CM_DRAW);
 			ops->cursor_flash = (!blank);
 
-			if (fb_blank(info, blank))
+			if (info->fbops->fb_blank)
+				ret = info->fbops->fb_blank(blank, info);
+			if (ret)
 				fbcon_generic_blank(vc, info, blank);
 		}
 
-- 
cgit v1.2.3


From f2fe1638f624467ae583b1a41a01804405f29eee Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Fri, 3 Oct 2008 15:23:39 -0700
Subject: orion_spi: fix handling of default transfer speed

Accept zero (the default!) as a per-transfer clock speed override.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/spi/orion_spi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/orion_spi.c b/drivers/spi/orion_spi.c
index c4eaacd6e553..b872bfaf4bd2 100644
--- a/drivers/spi/orion_spi.c
+++ b/drivers/spi/orion_spi.c
@@ -427,7 +427,7 @@ static int orion_spi_transfer(struct spi_device *spi, struct spi_message *m)
 			goto msg_rejected;
 		}
 
-		if (t->speed_hz < orion_spi->min_speed) {
+		if (t->speed_hz && t->speed_hz < orion_spi->min_speed) {
 			dev_err(&spi->dev,
 				"message rejected : "
 				"device min speed (%d Hz) exceeds "
-- 
cgit v1.2.3


From 897312bd240357c88ce906633703c324c6f0a5cd Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Fri, 3 Oct 2008 15:23:41 -0700
Subject: include/linux/stacktrace.h: declare struct task_struct

include/linux/stacktrace.h:13: warning:
 'struct task_struct' declared inside parameter list

(This might be a hard error on sparc64, which uses this header and has
-Werror)

Reported-by: "Randy.Dunlap" <rdunlap@xenotime.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/stacktrace.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/stacktrace.h b/include/linux/stacktrace.h
index 5da9794b2d78..b106fd8e0d5c 100644
--- a/include/linux/stacktrace.h
+++ b/include/linux/stacktrace.h
@@ -1,6 +1,8 @@
 #ifndef __LINUX_STACKTRACE_H
 #define __LINUX_STACKTRACE_H
 
+struct task_struct;
+
 #ifdef CONFIG_STACKTRACE
 struct stack_trace {
 	unsigned int nr_entries, max_entries;
-- 
cgit v1.2.3


From c222817f6add85197790e0071f6e511eff14ba25 Mon Sep 17 00:00:00 2001
From: Paul Jackson <pj@sgi.com>
Date: Fri, 3 Oct 2008 15:23:42 -0700
Subject: cpusets: remove pj from cpuset maintainers

Remove myself from the kernel MAINTAINERS file for cpusets.  I am leaving
SGI and probably will not be active in Linux kernel work.  I can be
reached at <pj@usa.net>.  Contact Derek Fults <dfults@sgi.com> for future
SGI+cpuset related issues.  I'm off to the next chapter of this good life.

Signed-off-by: Paul Jackson <pj@sgi.com>
Cc: Paul Menage <menage@google.com>
Cc: Derek Fults <dfults@sgi.com>
Cc: John Hesterberg <jh@sgi.com>
Cc: Paul Jackson <pj@usa.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 2 --
 1 file changed, 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 3596d1782264..f3d9cdb2816d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1198,9 +1198,7 @@ M:	hpa@zytor.com
 S:	Maintained
 
 CPUSETS
-P:	Paul Jackson
 P:	Paul Menage
-M:	pj@sgi.com
 M:	menage@google.com
 L:	linux-kernel@vger.kernel.org
 W:	http://www.bullopensource.org/cpuset/
-- 
cgit v1.2.3


From bd7ebec64d65ccf72a955a50fec27caf0f2458f1 Mon Sep 17 00:00:00 2001
From: Michael Kerrisk <mtk.manpages@googlemail.com>
Date: Fri, 3 Oct 2008 15:23:44 -0700
Subject: MAINTAINERS: add mailing list for man-pages

Nowadays, man-pages has an associated mailing list.  Mention that list
in MAINTAINERS.

Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 1 +
 1 file changed, 1 insertion(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index f3d9cdb2816d..8dae4555f10e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2704,6 +2704,7 @@ MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
 P:	Michael Kerrisk
 M:	mtk.manpages@gmail.com
 W:	http://www.kernel.org/doc/man-pages
+L:	linux-man@vger.kernel.org
 S:	Supported
 
 MARVELL LIBERTAS WIRELESS DRIVER
-- 
cgit v1.2.3


From 1d992ce905c838c2ca26fff8f2417cd31f667fd5 Mon Sep 17 00:00:00 2001
From: Michael Kerrisk <mtk.manpages@googlemail.com>
Date: Fri, 3 Oct 2008 15:23:44 -0700
Subject: SubmitChecklist: interfaces changes should CC linux-api@

Mention that patches that change the kernel-userland interface should
be CCed to the new list linux-api@vger.kernel.org.

Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/SubmitChecklist | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist
index da10e0714241..21f0795af20f 100644
--- a/Documentation/SubmitChecklist
+++ b/Documentation/SubmitChecklist
@@ -67,6 +67,8 @@ kernel patches.
 
 19: All new userspace interfaces are documented in Documentation/ABI/.
     See Documentation/ABI/README for more information.
+    Patches that change userspace interfaces should be CCed to
+    linux-api@vger.kernel.org.
 
 20: Check that it all passes `make headers_check'.
 
-- 
cgit v1.2.3


From 09b05f5ee04cd2e2af3384d50646f53c76712f10 Mon Sep 17 00:00:00 2001
From: Michael Kerrisk <mtk.manpages@googlemail.com>
Date: Fri, 3 Oct 2008 15:23:45 -0700
Subject: Documentation/HOWTO: info about interface changes should CC
 linux-api@vger

The "Documentation" section of this file mentions that when an interface
change is made, I should be CCed with info about the change (so that
man-pages can document it).  Additionally request that this info be CCed
to the new linux-api@vger.kernel.org list.

Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/HOWTO | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index c2371c5a98f9..48a3955f05fc 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -77,7 +77,8 @@ documentation files are also added which explain how to use the feature.
 When a kernel change causes the interface that the kernel exposes to
 userspace to change, it is recommended that you send the information or
 a patch to the manual pages explaining the change to the manual pages
-maintainer at mtk.manpages@gmail.com.
+maintainer at mtk.manpages@gmail.com, and CC the list
+linux-api@vger.kernel.org.
 
 Here is a list of files that are in the kernel source tree that are
 required reading:
-- 
cgit v1.2.3


From 7fe7b2f4ec14d6517078c5bc32b04301b468041c Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Fri, 3 Oct 2008 15:23:46 -0700
Subject: dw_dmac: fix copy/paste bug in tasklet

The tasklet checks RAW.BLOCK twice, and does not check RAW.XFER. This is
obviously wrong, and could theoretically cause the driver to hang.

Reported-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/dma/dw_dmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
index 94df91771243..0778d99aea7c 100644
--- a/drivers/dma/dw_dmac.c
+++ b/drivers/dma/dw_dmac.c
@@ -364,7 +364,7 @@ static void dw_dma_tasklet(unsigned long data)
 	int i;
 
 	status_block = dma_readl(dw, RAW.BLOCK);
-	status_xfer = dma_readl(dw, RAW.BLOCK);
+	status_xfer = dma_readl(dw, RAW.XFER);
 	status_err = dma_readl(dw, RAW.ERROR);
 
 	dev_vdbg(dw->dma.dev, "tasklet: status_block=%x status_err=%x\n",
-- 
cgit v1.2.3


From 07f696c7772fb3501e9531de38333c49143a8d52 Mon Sep 17 00:00:00 2001
From: Sven Wegener <sven.wegener@stealer.net>
Date: Fri, 3 Oct 2008 15:23:47 -0700
Subject: leds-fsg: change order of initialization and deinitialization

On initialization, we first do the ioremap and then register the led devices.
On deinitialization, we do it in reverse order. This prevents someone calling
into the brightness_set functions with an invalid latch_address.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Acked-by: Rod Whitby <rod@whitby.id.au>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/leds/leds-fsg.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/leds/leds-fsg.c b/drivers/leds/leds-fsg.c
index be0e12144b8b..34935155c1c0 100644
--- a/drivers/leds/leds-fsg.c
+++ b/drivers/leds/leds-fsg.c
@@ -161,6 +161,16 @@ static int fsg_led_probe(struct platform_device *pdev)
 {
 	int ret;
 
+	/* Map the LED chip select address space */
+	latch_address = (unsigned short *) ioremap(IXP4XX_EXP_BUS_BASE(2), 512);
+	if (!latch_address) {
+		ret = -ENOMEM;
+		goto failremap;
+	}
+
+	latch_value = 0xffff;
+	*latch_address = latch_value;
+
 	ret = led_classdev_register(&pdev->dev, &fsg_wlan_led);
 	if (ret < 0)
 		goto failwlan;
@@ -185,20 +195,8 @@ static int fsg_led_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto failring;
 
-	/* Map the LED chip select address space */
-	latch_address = (unsigned short *) ioremap(IXP4XX_EXP_BUS_BASE(2), 512);
-	if (!latch_address) {
-		ret = -ENOMEM;
-		goto failremap;
-	}
-
-	latch_value = 0xffff;
-	*latch_address = latch_value;
-
 	return ret;
 
- failremap:
-	led_classdev_unregister(&fsg_ring_led);
  failring:
 	led_classdev_unregister(&fsg_sync_led);
  failsync:
@@ -210,14 +208,14 @@ static int fsg_led_probe(struct platform_device *pdev)
  failwan:
 	led_classdev_unregister(&fsg_wlan_led);
  failwlan:
+	iounmap(latch_address);
+ failremap:
 
 	return ret;
 }
 
 static int fsg_led_remove(struct platform_device *pdev)
 {
-	iounmap(latch_address);
-
 	led_classdev_unregister(&fsg_wlan_led);
 	led_classdev_unregister(&fsg_wan_led);
 	led_classdev_unregister(&fsg_sata_led);
@@ -225,6 +223,8 @@ static int fsg_led_remove(struct platform_device *pdev)
 	led_classdev_unregister(&fsg_sync_led);
 	led_classdev_unregister(&fsg_ring_led);
 
+	iounmap(latch_address);
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From 95bf14bff58fd200f0c2147c84582cc2488367d0 Mon Sep 17 00:00:00 2001
From: Sven Wegener <sven.wegener@stealer.net>
Date: Fri, 3 Oct 2008 15:23:48 -0700
Subject: leds-pca955x: add proper error handling and fix bogus memory handling

Check the return value of led_classdev_register and unregister all
registered devices, if registering one device fails.  Also the dynamic
memory handling is totally bogus.  You can't allocate multiple chunks via
kzalloc() and expect them to be in order later.  I wonder how this ever
worked.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Acked-by: Nate Case <ncase@xes-inc.com>
Tested-by: Nate Case <ncase@xes-inc.com>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/leds/leds-pca955x.c | 70 ++++++++++++++++++++++++---------------------
 1 file changed, 38 insertions(+), 32 deletions(-)

diff --git a/drivers/leds/leds-pca955x.c b/drivers/leds/leds-pca955x.c
index 146c06972863..f508729123b5 100644
--- a/drivers/leds/leds-pca955x.c
+++ b/drivers/leds/leds-pca955x.c
@@ -248,11 +248,10 @@ static int __devinit pca955x_probe(struct i2c_client *client,
 					const struct i2c_device_id *id)
 {
 	struct pca955x_led *pca955x;
-	int i;
-	int err = -ENODEV;
 	struct pca955x_chipdef *chip;
 	struct i2c_adapter *adapter;
 	struct led_platform_data *pdata;
+	int i, err;
 
 	chip = &pca955x_chipdefs[id->driver_data];
 	adapter = to_i2c_adapter(client->dev.parent);
@@ -282,43 +281,41 @@ static int __devinit pca955x_probe(struct i2c_client *client,
 		}
 	}
 
+	pca955x = kzalloc(sizeof(*pca955x) * chip->bits, GFP_KERNEL);
+	if (!pca955x)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, pca955x);
+
 	for (i = 0; i < chip->bits; i++) {
-		pca955x = kzalloc(sizeof(struct pca955x_led), GFP_KERNEL);
-		if (!pca955x) {
-			err = -ENOMEM;
-			goto exit;
-		}
+		pca955x[i].chipdef = chip;
+		pca955x[i].client = client;
+		pca955x[i].led_num = i;
 
-		pca955x->chipdef = chip;
-		pca955x->client = client;
-		pca955x->led_num = i;
 		/* Platform data can specify LED names and default triggers */
 		if (pdata) {
 			if (pdata->leds[i].name)
-				snprintf(pca955x->name, 32, "pca955x:%s",
-							pdata->leds[i].name);
+				snprintf(pca955x[i].name,
+					 sizeof(pca955x[i].name), "pca955x:%s",
+					 pdata->leds[i].name);
 			if (pdata->leds[i].default_trigger)
-				pca955x->led_cdev.default_trigger =
+				pca955x[i].led_cdev.default_trigger =
 					pdata->leds[i].default_trigger;
 		} else {
-			snprintf(pca955x->name, 32, "pca955x:%d", i);
+			snprintf(pca955x[i].name, sizeof(pca955x[i].name),
+				 "pca955x:%d", i);
 		}
-		spin_lock_init(&pca955x->lock);
 
-		pca955x->led_cdev.name = pca955x->name;
-		pca955x->led_cdev.brightness_set =
-				pca955x_led_set;
+		spin_lock_init(&pca955x[i].lock);
 
-		/*
-		 * Client data is a pointer to the _first_ pca955x_led
-		 * struct
-		 */
-		if (i == 0)
-			i2c_set_clientdata(client, pca955x);
+		pca955x[i].led_cdev.name = pca955x[i].name;
+		pca955x[i].led_cdev.brightness_set = pca955x_led_set;
 
-		INIT_WORK(&(pca955x->work), pca955x_led_work);
+		INIT_WORK(&pca955x[i].work, pca955x_led_work);
 
-		led_classdev_register(&client->dev, &(pca955x->led_cdev));
+		err = led_classdev_register(&client->dev, &pca955x[i].led_cdev);
+		if (err < 0)
+			goto exit;
 	}
 
 	/* Turn off LEDs */
@@ -336,23 +333,32 @@ static int __devinit pca955x_probe(struct i2c_client *client,
 	pca955x_write_psc(client, 1, 0);
 
 	return 0;
+
 exit:
+	while (i--) {
+		led_classdev_unregister(&pca955x[i].led_cdev);
+		cancel_work_sync(&pca955x[i].work);
+	}
+
+	kfree(pca955x);
+	i2c_set_clientdata(client, NULL);
+
 	return err;
 }
 
 static int __devexit pca955x_remove(struct i2c_client *client)
 {
 	struct pca955x_led *pca955x = i2c_get_clientdata(client);
-	int leds = pca955x->chipdef->bits;
 	int i;
 
-	for (i = 0; i < leds; i++) {
-		led_classdev_unregister(&(pca955x->led_cdev));
-		cancel_work_sync(&(pca955x->work));
-		kfree(pca955x);
-		pca955x = pca955x + 1;
+	for (i = 0; i < pca955x->chipdef->bits; i++) {
+		led_classdev_unregister(&pca955x[i].led_cdev);
+		cancel_work_sync(&pca955x[i].work);
 	}
 
+	kfree(pca955x);
+	i2c_set_clientdata(client, NULL);
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From 76acae04c892287949e1191e99600f3e952e43f7 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Fri, 3 Oct 2008 15:23:49 -0700
Subject: ACPI: Make /proc/acpi/wakeup interface handle PCI devices (again)

Make the ACPI /proc/acpi/wakeup interface set the appropriate wake-up bits
of physical devices corresponding to the ACPI devices and make those bits
be set initially for devices that are enabled to wake up by default.  This
is needed to restore the 2.6.26 and earlier behavior for the PCI devices
that were previously handled correctly with the help of the
/proc/acpi/wakeup interface.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/acpi/glue.c       |  5 ++++-
 drivers/acpi/sleep/proc.c | 10 ++++++++++
 2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 084109507c9f..8dd3336efd7e 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -165,8 +165,11 @@ static int acpi_bind_one(struct device *dev, acpi_handle handle)
 				"firmware_node");
 		ret = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj,
 				"physical_node");
-		if (acpi_dev->wakeup.flags.valid)
+		if (acpi_dev->wakeup.flags.valid) {
 			device_set_wakeup_capable(dev, true);
+			device_set_wakeup_enable(dev,
+						acpi_dev->wakeup.state.enabled);
+		}
 	}
 
 	return 0;
diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c
index 4ebbba2b6b19..bf5b04de02d1 100644
--- a/drivers/acpi/sleep/proc.c
+++ b/drivers/acpi/sleep/proc.c
@@ -377,6 +377,14 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset)
 	return 0;
 }
 
+static void physical_device_enable_wakeup(struct acpi_device *adev)
+{
+	struct device *dev = acpi_get_physical_device(adev->handle);
+
+	if (dev && device_can_wakeup(dev))
+		device_set_wakeup_enable(dev, adev->wakeup.state.enabled);
+}
+
 static ssize_t
 acpi_system_write_wakeup_device(struct file *file,
 				const char __user * buffer,
@@ -411,6 +419,7 @@ acpi_system_write_wakeup_device(struct file *file,
 		}
 	}
 	if (found_dev) {
+		physical_device_enable_wakeup(found_dev);
 		list_for_each_safe(node, next, &acpi_wakeup_device_list) {
 			struct acpi_device *dev = container_of(node,
 							       struct
@@ -428,6 +437,7 @@ acpi_system_write_wakeup_device(struct file *file,
 				       dev->pnp.bus_id, found_dev->pnp.bus_id);
 				dev->wakeup.state.enabled =
 				    found_dev->wakeup.state.enabled;
+				physical_device_enable_wakeup(dev);
 			}
 		}
 	}
-- 
cgit v1.2.3


From 07454bfff151d2465ada809bbaddf3548cc1097c Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Sat, 4 Oct 2008 10:51:07 +0200
Subject: clockevents: check broadcast tick device not the clock events device

Impact: jiffies increment too fast.

Hugh Dickins noted that with NOHZ=n and HIGHRES=n jiffies get
incremented too fast. The reason is a wrong check in the broadcast
enter/exit code, which keeps the local apic timer in periodic mode
when the switch happens.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 kernel/time/tick-broadcast.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index bd7034542399..cb01cd8f919b 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -235,7 +235,8 @@ static void tick_do_broadcast_on_off(void *why)
 	case CLOCK_EVT_NOTIFY_BROADCAST_FORCE:
 		if (!cpu_isset(cpu, tick_broadcast_mask)) {
 			cpu_set(cpu, tick_broadcast_mask);
-			if (bc->mode == TICKDEV_MODE_PERIODIC)
+			if (tick_broadcast_device.mode ==
+			    TICKDEV_MODE_PERIODIC)
 				clockevents_shutdown(dev);
 		}
 		if (*reason == CLOCK_EVT_NOTIFY_BROADCAST_FORCE)
@@ -245,7 +246,8 @@ static void tick_do_broadcast_on_off(void *why)
 		if (!tick_broadcast_force &&
 		    cpu_isset(cpu, tick_broadcast_mask)) {
 			cpu_clear(cpu, tick_broadcast_mask);
-			if (bc->mode == TICKDEV_MODE_PERIODIC)
+			if (tick_broadcast_device.mode ==
+			    TICKDEV_MODE_PERIODIC)
 				tick_setup_periodic(dev, 0);
 		}
 		break;
-- 
cgit v1.2.3


From 1167b2e495e42d757f9bb879c60bc0cf3391eaae Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sat, 6 Sep 2008 07:22:13 -0300
Subject: V4L/DVB (8919): cx18: Fix tuner audio input for Compro H900 cards

Earlier fixes to get the tuner audio working correctly broke the audio
on the Compro VideoMate H900 cards. This is now fixed.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx18/cx18-cards.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index 8fe5f38c4d7c..3cb9734ec07b 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -163,7 +163,7 @@ static const struct cx18_card cx18_card_h900 = {
 	},
 	.audio_inputs = {
 		{ CX18_CARD_INPUT_AUD_TUNER,
-		  CX18_AV_AUDIO8, 0 },
+		  CX18_AV_AUDIO5, 0 },
 		{ CX18_CARD_INPUT_LINE_IN1,
 		  CX18_AV_AUDIO_SERIAL1, 0 },
 	},
-- 
cgit v1.2.3


From 0d0548e67f0184704b7ecdf3c3ebf0e23c5af8c8 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Fri, 5 Sep 2008 12:49:54 -0300
Subject: V4L/DVB (8926): gspca: Bad fix of leak memory (changeset
 43d2ead315b1).

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/gspca.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index ed8935da58e0..ac95c55887df 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -459,8 +459,7 @@ static int create_urbs(struct gspca_dev *gspca_dev,
 		urb = usb_alloc_urb(npkt, GFP_KERNEL);
 		if (!urb) {
 			err("usb_alloc_urb failed");
-			for (i = 0; i < n; i++)
-				usb_free_urb(gspca_dev->urb[i]);
+			destroy_urbs(gspca_dev);
 			return -ENOMEM;
 		}
 		urb->transfer_buffer = usb_buffer_alloc(gspca_dev->dev,
@@ -470,8 +469,8 @@ static int create_urbs(struct gspca_dev *gspca_dev,
 
 		if (urb->transfer_buffer == NULL) {
 			usb_free_urb(urb);
-			destroy_urbs(gspca_dev);
 			err("usb_buffer_urb failed");
+			destroy_urbs(gspca_dev);
 			return -ENOMEM;
 		}
 		gspca_dev->urb[n] = urb;
-- 
cgit v1.2.3


From 5be8b73e121c8d293d7cfc698bbb084574fd8de2 Mon Sep 17 00:00:00 2001
From: Costantino Leandro <le_costantino@pixartargentina.com.ar>
Date: Tue, 9 Sep 2008 04:32:46 -0300
Subject: V4L/DVB (8933): gspca: Disable light frquency for zc3xx cs2102 Kokom.

CS2102K stop streaming on setlightfreq (50Hz & 60Hz).
Disable it for now until a correct solution is found.

Signed-off-by: Costantino Leandro <le_costantino@pixartargentina.com.ar>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/zc3xx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 8d7c27e6ac77..d61ef727e0c2 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -6576,8 +6576,8 @@ static int setlightfreq(struct gspca_dev *gspca_dev)
 		 cs2102_60HZ, cs2102_60HZScale},
 /* SENSOR_CS2102K 1 */
 		{cs2102_NoFliker, cs2102_NoFlikerScale,
-		 cs2102_50HZ, cs2102_50HZScale,
-		 cs2102_60HZ, cs2102_60HZScale},
+		 NULL, NULL, /* currently disabled */
+		 NULL, NULL},
 /* SENSOR_GC0305 2 */
 		{gc0305_NoFliker, gc0305_NoFliker,
 		 gc0305_50HZ, gc0305_50HZ,
-- 
cgit v1.2.3


From c737684b51e1edee16fbdf22e9a65ddad261e907 Mon Sep 17 00:00:00 2001
From: Douglas Schilling Landgraf <dougsland@linuxtv.org>
Date: Mon, 8 Sep 2008 03:22:55 -0300
Subject: V4L/DVB (8935): em28xx-cards: Remove duplicate entry
 (EM2800_BOARD_KWORLD_USB2800)

Removed duplicated entry for EM2800_BOARD_KWORLD_USB2800

Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/em28xx-cards.c | 22 ----------------------
 1 file changed, 22 deletions(-)

diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 452da70e719f..4d20cda7a1fa 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -93,28 +93,6 @@ struct em28xx_board em28xx_boards[] = {
 			.amux     = 0,
 		} },
 	},
-	[EM2800_BOARD_KWORLD_USB2800] = {
-		.name         = "Kworld USB2800",
-		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.is_em2800    = 1,
-		.vchannels    = 3,
-		.tuner_type   = TUNER_PHILIPS_FCV1236D,
-		.tda9887_conf = TDA9887_PRESENT,
-		.decoder      = EM28XX_SAA7113,
-		.input          = { {
-			.type     = EM28XX_VMUX_TELEVISION,
-			.vmux     = SAA7115_COMPOSITE2,
-			.amux     = 0,
-		}, {
-			.type     = EM28XX_VMUX_COMPOSITE1,
-			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = 1,
-		}, {
-			.type     = EM28XX_VMUX_SVIDEO,
-			.vmux     = SAA7115_SVIDEO3,
-			.amux     = 1,
-		} },
-	},
 	[EM2820_BOARD_KWORLD_PVRTV2800RF] = {
 		.name         = "Kworld PVR TV 2800 RF",
 		.is_em2800    = 0,
-- 
cgit v1.2.3


From c37396c19403e249f12626187d51e92c915f2bc9 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Sun, 7 Sep 2008 13:47:03 -0300
Subject: V4L/DVB (8955): bttv: Prevent NULL pointer dereference in radio_open

Fix the following crash in the bttv driver:

BUG: unable to handle kernel NULL pointer dereference at 000000000000036c
IP: [<ffffffffa037860a>] radio_open+0x3a/0x170 [bttv]

This happens because radio_open assumes that all present bttv devices
have a radio function. If a bttv device without radio and one with
radio are installed on the same system, and the one without radio is
registered first, then radio_open checks for the radio device number
of a bttv device that has no radio function, and this breaks. All we
have to do to fix it is to skip bttv devices without a radio function.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/bt8xx/bttv-driver.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 6ae4cc860efe..933eaef41ead 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -3431,7 +3431,7 @@ static int radio_open(struct inode *inode, struct file *file)
 	dprintk("bttv: open minor=%d\n",minor);
 
 	for (i = 0; i < bttv_num; i++) {
-		if (bttvs[i].radio_dev->minor == minor) {
+		if (bttvs[i].radio_dev && bttvs[i].radio_dev->minor == minor) {
 			btv = &bttvs[i];
 			break;
 		}
-- 
cgit v1.2.3


From c014ec90bc1b951e3fff89bc6ba826b8ef0f444b Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Sun, 7 Sep 2008 05:21:34 -0300
Subject: V4L/DVB (8957): zr36067: Restore the default pixel format

Restore the default pixel format to YUYV as it used to be before
kernel 2.6.23. It was accidentally changed to BGR3 by commit
603d6f2c8f9f3604f9c6c1f8903efc2df30a000f.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/zoran_card.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c
index d842a7cb99d2..3282be730298 100644
--- a/drivers/media/video/zoran_card.c
+++ b/drivers/media/video/zoran_card.c
@@ -988,7 +988,7 @@ zoran_open_init_params (struct zoran *zr)
 	zr->v4l_grab_seq = 0;
 	zr->v4l_settings.width = 192;
 	zr->v4l_settings.height = 144;
-	zr->v4l_settings.format = &zoran_formats[4];	/* YUY2 - YUV-4:2:2 packed */
+	zr->v4l_settings.format = &zoran_formats[7];	/* YUY2 - YUV-4:2:2 packed */
 	zr->v4l_settings.bytesperline =
 	    zr->v4l_settings.width *
 	    ((zr->v4l_settings.format->depth + 7) / 8);
-- 
cgit v1.2.3


From bba4449c637660d5a8b2aee5ad0206df9fd6f334 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Sun, 7 Sep 2008 05:56:55 -0300
Subject: V4L/DVB (8958): zr36067: Return proper bytes-per-line value

The zr36067 driver should return the actual bytes-per-line value when
queried with ioctl VIDIOC_G_FMT, instead of 0. Otherwise user-space
applications can get confused.

Likewise, with ioctl VIDIOC_S_FMT, we are supposed to fill the
bytes-per-line value. And we shouldn't fail if the caller sets the
initial value to something different from 0. This is perfectly valid
for applications to pre-fill this field with the value they expect.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/zoran_driver.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c
index ec6f59674b10..ca21bd22a02e 100644
--- a/drivers/media/video/zoran_driver.c
+++ b/drivers/media/video/zoran_driver.c
@@ -2737,7 +2737,8 @@ zoran_do_ioctl (struct inode *inode,
 				    fh->v4l_settings.format->fourcc;
 				fmt->fmt.pix.colorspace =
 				    fh->v4l_settings.format->colorspace;
-				fmt->fmt.pix.bytesperline = 0;
+				fmt->fmt.pix.bytesperline =
+				    fh->v4l_settings.bytesperline;
 				if (BUZ_MAX_HEIGHT <
 				    (fh->v4l_settings.height * 2))
 					fmt->fmt.pix.field =
@@ -2833,13 +2834,6 @@ zoran_do_ioctl (struct inode *inode,
 				fmt->fmt.pix.pixelformat,
 				(char *) &printformat);
 
-			if (fmt->fmt.pix.bytesperline > 0) {
-				dprintk(5,
-					KERN_ERR "%s: bpl not supported\n",
-					ZR_DEVNAME(zr));
-				return -EINVAL;
-			}
-
 			/* we can be requested to do JPEG/raw playback/capture */
 			if (!
 			    (fmt->type == V4L2_BUF_TYPE_VIDEO_CAPTURE ||
@@ -2923,6 +2917,7 @@ zoran_do_ioctl (struct inode *inode,
 				fh->jpg_buffers.buffer_size =
 				    zoran_v4l2_calc_bufsize(&fh->
 							    jpg_settings);
+				fmt->fmt.pix.bytesperline = 0;
 				fmt->fmt.pix.sizeimage =
 				    fh->jpg_buffers.buffer_size;
 
@@ -2979,6 +2974,8 @@ zoran_do_ioctl (struct inode *inode,
 
 				/* tell the user the
 				 * results/missing stuff */
+				fmt->fmt.pix.bytesperline =
+					fh->v4l_settings.bytesperline;
 				fmt->fmt.pix.sizeimage =
 					fh->v4l_settings.height *
 					fh->v4l_settings.bytesperline;
-- 
cgit v1.2.3


From ec16d020836fd0a753312374a3277668ac4f8ee2 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Wed, 3 Sep 2008 02:15:39 -0300
Subject: V4L/DVB (8960): drivers/media/video/cafe_ccic.c needs mm.h

sparc32 allmodconfig:

drivers/media/video/cafe_ccic.c: In function 'cafe_setup_siobuf':
drivers/media/video/cafe_ccic.c:1192: error: implicit declaration of function 'PAGE_ALIGN'
drivers/media/video/cafe_ccic.c: At top level:
drivers/media/video/cafe_ccic.c:1430: error: variable 'cafe_v4l_vm_ops' has initializer but incomplete type
drivers/media/video/cafe_ccic.c:1431: error: unknown field 'open' specified in initializer
drivers/media/video/cafe_ccic.c:1431: warning: excess elements in struct initializer
drivers/media/video/cafe_ccic.c:1431: warning: (near initialization for 'cafe_v4l_vm_ops')
drivers/media/video/cafe_ccic.c:1432: error: unknown field 'close' specified in initializer
drivers/media/video/cafe_ccic.c:1433: warning: excess elements in struct initializer
drivers/media/video/cafe_ccic.c:1433: warning: (near initialization for 'cafe_v4l_vm_ops')
drivers/media/video/cafe_ccic.c: In function 'cafe_v4l_mmap':
drivers/media/video/cafe_ccic.c:1444: error: 'VM_WRITE' undeclared (first use in this function)
drivers/media/video/cafe_ccic.c:1444: error: (Each undeclared identifier is reported only once
drivers/media/video/cafe_ccic.c:1444: error: for each function it appears in.)
drivers/media/video/cafe_ccic.c:1444: error: 'VM_SHARED' undeclared (first use in this function)
drivers/media/video/cafe_ccic.c:1461: error: 'VM_DONTEXPAND' undeclared (first use in this function)

This build breakage is caused by some header file shuffle in linux-next.  But
I suggest that this patch be merged ahead of linux-next to avoid bisection
breakage.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cafe_ccic.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index c149b7d712e5..5405c30dbb04 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -19,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/fs.h>
+#include <linux/mm.h>
 #include <linux/pci.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
-- 
cgit v1.2.3


From a30ee3c747728f9151664118ffcbdeefd202c332 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Fri, 5 Sep 2008 10:39:27 -0300
Subject: V4L/DVB (8961): zr36067: Fix RGBR pixel format

The zr36067 driver is improperly declaring pixel format RGBP twice,
once as "16-bit RGB LE" and once as "16-bit RGB BE". The latter is
actually RGBR. Fix the code to properly map both pixel formats.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/zoran_driver.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c
index ca21bd22a02e..2dab9eea4def 100644
--- a/drivers/media/video/zoran_driver.c
+++ b/drivers/media/video/zoran_driver.c
@@ -134,7 +134,7 @@ const struct zoran_format zoran_formats[] = {
 	}, {
 		.name = "16-bit RGB BE",
 		ZFMT(-1,
-		     V4L2_PIX_FMT_RGB565, V4L2_COLORSPACE_SRGB),
+		     V4L2_PIX_FMT_RGB565X, V4L2_COLORSPACE_SRGB),
 		.depth = 16,
 		.flags = ZORAN_FORMAT_CAPTURE |
 			 ZORAN_FORMAT_OVERLAY,
-- 
cgit v1.2.3


From a1c4530e4e5b73e60ed96c413902c6a46e812494 Mon Sep 17 00:00:00 2001
From: Dean Anderson <dean@sensoray.com>
Date: Tue, 9 Sep 2008 12:29:56 -0300
Subject: V4L/DVB (8963): s2255drv field count fix

Fixes videobuf field_count

Signed-off-by: Dean Anderson <dean@sensoray.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/s2255drv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index b1d09d8e2b85..92b83feae366 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -669,7 +669,7 @@ static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf,
 		(unsigned long)vbuf, pos);
 	/* tell v4l buffer was filled */
 
-	buf->vb.field_count++;
+	buf->vb.field_count = dev->frame_count[chn] * 2;
 	do_gettimeofday(&ts);
 	buf->vb.ts = ts;
 	buf->vb.state = VIDEOBUF_DONE;
@@ -1268,6 +1268,7 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
 	dev->last_frame[chn] = -1;
 	dev->bad_payload[chn] = 0;
 	dev->cur_frame[chn] = 0;
+	dev->frame_count[chn] = 0;
 	for (j = 0; j < SYS_FRAMES; j++) {
 		dev->buffer[chn].frame[j].ulState = 0;
 		dev->buffer[chn].frame[j].cur_size = 0;
-- 
cgit v1.2.3


From 5ea7fe48a95084897786b0f20109d0611bdababc Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <devin.heitmueller@gmail.com>
Date: Tue, 16 Sep 2008 02:02:12 -0300
Subject: V4L/DVB (8967): Use correct XC3028L firmware for AMD ATI TV Wonder
 600

The AMD ATI TV Wonder 600 has an XC3028L and *not* an XC3028, so we need to
load the proper firmware to prevent the device from overheating.

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/common/tuners/tuner-xc2028.h | 1 +
 drivers/media/video/em28xx/em28xx-cards.c  | 5 ++++-
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/media/common/tuners/tuner-xc2028.h b/drivers/media/common/tuners/tuner-xc2028.h
index 216025cf5d4b..2c5b6282b569 100644
--- a/drivers/media/common/tuners/tuner-xc2028.h
+++ b/drivers/media/common/tuners/tuner-xc2028.h
@@ -10,6 +10,7 @@
 #include "dvb_frontend.h"
 
 #define XC2028_DEFAULT_FIRMWARE "xc3028-v27.fw"
+#define XC3028L_DEFAULT_FIRMWARE "xc3028L-v36.fw"
 
 /*      Dmoduler		IF (kHz) */
 #define	XC3028_FE_DEFAULT	0		/* Don't load SCODE */
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 4d20cda7a1fa..c7456e976655 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -1530,9 +1530,12 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
 		/* djh - Not sure which demod we need here */
 		ctl->demod = XC3028_FE_DEFAULT;
 		break;
+	case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
+		ctl->demod = XC3028_FE_DEFAULT;
+		ctl->fname = XC3028L_DEFAULT_FIRMWARE;
+		break;
 	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
 	case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
-	case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
 		/* FIXME: Better to specify the needed IF */
 		ctl->demod = XC3028_FE_DEFAULT;
 		break;
-- 
cgit v1.2.3


From 7a9b5fc5fd9e30b58be767722e270f3df651f27c Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Thu, 11 Sep 2008 23:02:12 -0300
Subject: V4L/DVB (8978): sms1xxx: fix product name for Hauppauge WinTV
 MiniStick

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/siano/sms-cards.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c
index cc5efb643f33..06297665c9f9 100644
--- a/drivers/media/dvb/siano/sms-cards.c
+++ b/drivers/media/dvb/siano/sms-cards.c
@@ -87,7 +87,7 @@ static struct sms_board sms_boards[] = {
 		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-nova-b-dvbt-01.fw",
 	},
 	[SMS1XXX_BOARD_HAUPPAUGE_WINDHAM] = {
-		.name	= "Hauppauge WinTV-Nova-T-MiniStick",
+		.name	= "Hauppauge WinTV MiniStick",
 		.type	= SMS_NOVA_B0,
 		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-01.fw",
 	},
-- 
cgit v1.2.3


From 3d843c92da5a1f1ab2cbc2b2e04f84d5ecedf5aa Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Tue, 16 Sep 2008 16:46:42 -0300
Subject: V4L/DVB (8979): sms1xxx: Add new USB product ID for Hauppauge WinTV
 MiniStick

2040:5510 is the same hardware as 2040:5500

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/siano/sms-cards.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c
index 06297665c9f9..9da260fe3fd1 100644
--- a/drivers/media/dvb/siano/sms-cards.c
+++ b/drivers/media/dvb/siano/sms-cards.c
@@ -40,6 +40,8 @@ struct usb_device_id smsusb_id_table[] = {
 		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B },
 	{ USB_DEVICE(0x2040, 0x5500),
 		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
+	{ USB_DEVICE(0x2040, 0x5510),
+		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
 	{ USB_DEVICE(0x2040, 0x5580),
 		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
 	{ USB_DEVICE(0x2040, 0x5590),
-- 
cgit v1.2.3


From dda06a8e4610757def753ee3a541a0b1a1feb36b Mon Sep 17 00:00:00 2001
From: Andreas Oberritter <obi@linuxtv.org>
Date: Wed, 24 Sep 2008 05:00:37 -0300
Subject: V4L/DVB (9029): Fix deadlock in demux code

The functions dvb_dmxdev_section_callback, dvb_dmxdev_ts_callback,
dvb_dmx_swfilter_packet, dvb_dmx_swfilter_packets, dvb_dmx_swfilter and
dvb_dmx_swfilter_204 may be called from both interrupt and process
context. Therefore they need to be protected by spin_lock_irqsave()
instead of spin_lock().

This fixes a deadlock discovered by lockdep.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-core/dmxdev.c    | 16 +++++++++-------
 drivers/media/dvb/dvb-core/dvb_demux.c | 16 ++++++++++------
 2 files changed, 19 insertions(+), 13 deletions(-)

diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
index 069d847ba887..0c733c66a441 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -364,15 +364,16 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len,
 				       enum dmx_success success)
 {
 	struct dmxdev_filter *dmxdevfilter = filter->priv;
+	unsigned long flags;
 	int ret;
 
 	if (dmxdevfilter->buffer.error) {
 		wake_up(&dmxdevfilter->buffer.queue);
 		return 0;
 	}
-	spin_lock(&dmxdevfilter->dev->lock);
+	spin_lock_irqsave(&dmxdevfilter->dev->lock, flags);
 	if (dmxdevfilter->state != DMXDEV_STATE_GO) {
-		spin_unlock(&dmxdevfilter->dev->lock);
+		spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
 		return 0;
 	}
 	del_timer(&dmxdevfilter->timer);
@@ -391,7 +392,7 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len,
 	}
 	if (dmxdevfilter->params.sec.flags & DMX_ONESHOT)
 		dmxdevfilter->state = DMXDEV_STATE_DONE;
-	spin_unlock(&dmxdevfilter->dev->lock);
+	spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
 	wake_up(&dmxdevfilter->buffer.queue);
 	return 0;
 }
@@ -403,11 +404,12 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len,
 {
 	struct dmxdev_filter *dmxdevfilter = feed->priv;
 	struct dvb_ringbuffer *buffer;
+	unsigned long flags;
 	int ret;
 
-	spin_lock(&dmxdevfilter->dev->lock);
+	spin_lock_irqsave(&dmxdevfilter->dev->lock, flags);
 	if (dmxdevfilter->params.pes.output == DMX_OUT_DECODER) {
-		spin_unlock(&dmxdevfilter->dev->lock);
+		spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
 		return 0;
 	}
 
@@ -417,7 +419,7 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len,
 	else
 		buffer = &dmxdevfilter->dev->dvr_buffer;
 	if (buffer->error) {
-		spin_unlock(&dmxdevfilter->dev->lock);
+		spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
 		wake_up(&buffer->queue);
 		return 0;
 	}
@@ -428,7 +430,7 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len,
 		dvb_ringbuffer_flush(buffer);
 		buffer->error = ret;
 	}
-	spin_unlock(&dmxdevfilter->dev->lock);
+	spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
 	wake_up(&buffer->queue);
 	return 0;
 }
diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c
index e2eca0b1fe7c..a2c1fd5d2f67 100644
--- a/drivers/media/dvb/dvb-core/dvb_demux.c
+++ b/drivers/media/dvb/dvb-core/dvb_demux.c
@@ -399,7 +399,9 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf)
 void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf,
 			      size_t count)
 {
-	spin_lock(&demux->lock);
+	unsigned long flags;
+
+	spin_lock_irqsave(&demux->lock, flags);
 
 	while (count--) {
 		if (buf[0] == 0x47)
@@ -407,16 +409,17 @@ void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf,
 		buf += 188;
 	}
 
-	spin_unlock(&demux->lock);
+	spin_unlock_irqrestore(&demux->lock, flags);
 }
 
 EXPORT_SYMBOL(dvb_dmx_swfilter_packets);
 
 void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count)
 {
+	unsigned long flags;
 	int p = 0, i, j;
 
-	spin_lock(&demux->lock);
+	spin_lock_irqsave(&demux->lock, flags);
 
 	if (demux->tsbufp) {
 		i = demux->tsbufp;
@@ -449,17 +452,18 @@ void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count)
 	}
 
 bailout:
-	spin_unlock(&demux->lock);
+	spin_unlock_irqrestore(&demux->lock, flags);
 }
 
 EXPORT_SYMBOL(dvb_dmx_swfilter);
 
 void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count)
 {
+	unsigned long flags;
 	int p = 0, i, j;
 	u8 tmppack[188];
 
-	spin_lock(&demux->lock);
+	spin_lock_irqsave(&demux->lock, flags);
 
 	if (demux->tsbufp) {
 		i = demux->tsbufp;
@@ -500,7 +504,7 @@ void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count)
 	}
 
 bailout:
-	spin_unlock(&demux->lock);
+	spin_unlock_irqrestore(&demux->lock, flags);
 }
 
 EXPORT_SYMBOL(dvb_dmx_swfilter_204);
-- 
cgit v1.2.3


From c18c5ffe13e553cf670da521fe09150c36edeb61 Mon Sep 17 00:00:00 2001
From: Patrick Boettcher <pb@linuxtv.org>
Date: Sat, 6 Sep 2008 13:31:58 -0300
Subject: V4L/DVB (9037): Fix support for Hauppauge Nova-S SE

Different backends have different input busses (saa7146, flexcop).
To reflect that a config-option to the s5h1420-driver was added which makes
the output mode selectable.

Furthermore the s5h1420-driver is now doing the same i2c-method as it was done
before adding support for other i2c-users.

This patch needs to go into the current release of the kernel, as this driver
is currently broken.

(Thanks to Eberhard Kaltenhaeuser for helping out to debug this issue.)

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 1 +
 drivers/media/dvb/frontends/s5h1420.c     | 9 ++++++---
 drivers/media/dvb/frontends/s5h1420.h     | 8 +++++---
 3 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index 4eed783f4bce..a127a4175c40 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -491,6 +491,7 @@ static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
 	.demod_address = 0x53,
 	.invert = 1,
 	.repeated_start_workaround = 1,
+	.serial_mpeg = 1,
 };
 
 static struct itd1000_config skystar2_rev2_7_itd1000_config = {
diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c
index 747d3fa2e5e5..7d6cb39da1d9 100644
--- a/drivers/media/dvb/frontends/s5h1420.c
+++ b/drivers/media/dvb/frontends/s5h1420.c
@@ -94,8 +94,11 @@ static u8 s5h1420_readreg(struct s5h1420_state *state, u8 reg)
 		if (ret != 3)
 			return ret;
 	} else {
-		ret = i2c_transfer(state->i2c, &msg[1], 2);
-		if (ret != 2)
+		ret = i2c_transfer(state->i2c, &msg[1], 1);
+		if (ret != 1)
+			return ret;
+		ret = i2c_transfer(state->i2c, &msg[2], 1);
+		if (ret != 1)
 			return ret;
 	}
 
@@ -823,7 +826,7 @@ static int s5h1420_init (struct dvb_frontend* fe)
 	struct s5h1420_state* state = fe->demodulator_priv;
 
 	/* disable power down and do reset */
-	state->CON_1_val = 0x10;
+	state->CON_1_val = state->config->serial_mpeg << 4;
 	s5h1420_writereg(state, 0x02, state->CON_1_val);
 	msleep(10);
 	s5h1420_reset(state);
diff --git a/drivers/media/dvb/frontends/s5h1420.h b/drivers/media/dvb/frontends/s5h1420.h
index 4c913f142bc4..ff308136d865 100644
--- a/drivers/media/dvb/frontends/s5h1420.h
+++ b/drivers/media/dvb/frontends/s5h1420.h
@@ -32,10 +32,12 @@ struct s5h1420_config
 	u8 demod_address;
 
 	/* does the inversion require inversion? */
-	u8 invert : 1;
+	u8 invert:1;
 
-	u8 repeated_start_workaround : 1;
-	u8 cdclk_polarity : 1; /* 1 == falling edge, 0 == raising edge */
+	u8 repeated_start_workaround:1;
+	u8 cdclk_polarity:1; /* 1 == falling edge, 0 == raising edge */
+
+	u8 serial_mpeg:1;
 };
 
 #if defined(CONFIG_DVB_S5H1420) || (defined(CONFIG_DVB_S5H1420_MODULE) && defined(MODULE))
-- 
cgit v1.2.3


From bda1cda54b7e1654e9416fec76e6342847b25216 Mon Sep 17 00:00:00 2001
From: Patrick Boettcher <pb@linuxtv.org>
Date: Sun, 7 Sep 2008 16:04:38 -0300
Subject: V4L/DVB (9043): S5H1420: Fix size of shadow-array to avoid overflow

The array size of 'shadow' still needs to be fixed in order to not overflow when reading register 0x00.

Thanks to Oliver Endriss for pointing that out.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/s5h1420.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c
index 7d6cb39da1d9..2e9fd2893ede 100644
--- a/drivers/media/dvb/frontends/s5h1420.c
+++ b/drivers/media/dvb/frontends/s5h1420.c
@@ -59,7 +59,7 @@ struct s5h1420_state {
 	 * it does not support repeated-start, workaround: write addr-1
 	 * and then read
 	 */
-	u8 shadow[255];
+	u8 shadow[256];
 };
 
 static u32 s5h1420_getsymbolrate(struct s5h1420_state* state);
-- 
cgit v1.2.3


From fe6c700ff34e68e1eb7991e9c5d18986d0005ac1 Mon Sep 17 00:00:00 2001
From: Ralph Loader <suckfish@ihug.co.nz>
Date: Mon, 22 Sep 2008 21:06:48 -0300
Subject: V4L/DVB (9053): fix buffer overflow in uvc-video

There is a buffer overflow in drivers/media/video/uvc/uvc_ctrl.c:

INFO: 0xf2c5ce08-0xf2c5ce0b. First byte 0xa1 instead of 0xcc
INFO: Allocated in uvc_query_v4l2_ctrl+0x3c/0x239 [uvcvideo] age=13 cpu=1 pid=4975
...

A fixed size 8-byte buffer is allocated, and a variable size field is read
into it; there is no particular bound on the size of the field (it is
dependent on hardware and configuration) and it can overflow [also
verified by inserting printk's.]

The patch attempts to size the buffer to the correctly.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/uvc/uvc_ctrl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index 6ef3e5297de8..feab12aa2c7b 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -592,7 +592,7 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video,
 	if (ctrl == NULL)
 		return -EINVAL;
 
-	data = kmalloc(8, GFP_KERNEL);
+	data = kmalloc(ctrl->info->size, GFP_KERNEL);
 	if (data == NULL)
 		return -ENOMEM;
 
-- 
cgit v1.2.3


From 05d3c1e2fb95d3233f6ec0f1d4b9bb07655636b2 Mon Sep 17 00:00:00 2001
From: Shane <gnome42@gmail.com>
Date: Sun, 14 Sep 2008 04:17:46 -0300
Subject: V4L/DVB (9075): gspca: Bad check of returned status in i2c_read()
 spca561.

This makes auto gain functional on 04fc:0561.

Signed-off-by: Shane <gnome42@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/spca561.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index cfbc9ebc5c5d..95fcfcb9e31b 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -225,7 +225,7 @@ static int i2c_read(struct gspca_dev *gspca_dev, __u16 reg, __u8 mode)
 	reg_w_val(gspca_dev->dev, 0x8802, (mode | 0x01));
 	do {
 		reg_r(gspca_dev, 0x8803, 1);
-		if (!gspca_dev->usb_buf)
+		if (!gspca_dev->usb_buf[0])
 			break;
 	} while (--retry);
 	if (retry == 0)
-- 
cgit v1.2.3


From 8d768e14fc57160b35ac13e797a81163baab34d2 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Sun, 21 Sep 2008 03:28:55 -0300
Subject: V4L/DVB (9080): gspca: Add a delay after writing to the sonixj
 sensors.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixj.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index d75b1d20b318..44f86e1f80f0 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -707,6 +707,7 @@ static void i2c_w8(struct gspca_dev *gspca_dev,
 			0x08, 0,		/* value, index */
 			gspca_dev->usb_buf, 8,
 			500);
+	msleep(2);
 }
 
 /* read 5 bytes in gspca_dev->usb_buf */
-- 
cgit v1.2.3


From 674cbc691c5439134bb2ea064c0ee1311fc92384 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Thu, 2 Oct 2008 08:06:59 -0300
Subject: V4L/DVB (9092): gspca: Bad init values for sonixj ov7660.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixj.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 44f86e1f80f0..572b0f363b64 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -977,13 +977,13 @@ static int sd_init(struct gspca_dev *gspca_dev)
 	case BRIDGE_SN9C105:
 		if (regF1 != 0x11)
 			return -ENODEV;
-		reg_w(gspca_dev, 0x02, regGpio, 2);
+		reg_w(gspca_dev, 0x01, regGpio, 2);
 		break;
 	case BRIDGE_SN9C120:
 		if (regF1 != 0x12)
 			return -ENODEV;
 		regGpio[1] = 0x70;
-		reg_w(gspca_dev, 0x02, regGpio, 2);
+		reg_w(gspca_dev, 0x01, regGpio, 2);
 		break;
 	default:
 /*	case BRIDGE_SN9C110: */
@@ -1184,7 +1184,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	static const __u8 CA[] = { 0x28, 0xd8, 0x14, 0xec };
 	static const __u8 CE[] = { 0x32, 0xdd, 0x2d, 0xdd };	/* MI0360 */
 	static const __u8 CE_ov76xx[] =
-			{ 0x32, 0xdd, 0x32, 0xdd };	/* OV7630/48 */
+				{ 0x32, 0xdd, 0x32, 0xdd };
 
 	sn9c1xx = sn_tb[(int) sd->sensor];
 	configure_gpio(gspca_dev, sn9c1xx);
@@ -1224,8 +1224,15 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	reg_w(gspca_dev, 0x20, gamma_def, sizeof gamma_def);
 	for (i = 0; i < 8; i++)
 		reg_w(gspca_dev, 0x84, reg84, sizeof reg84);
+	switch (sd->sensor) {
+	case SENSOR_OV7660:
+		reg_w1(gspca_dev, 0x9a, 0x05);
+		break;
+	default:
 		reg_w1(gspca_dev, 0x9a, 0x08);
 		reg_w1(gspca_dev, 0x99, 0x59);
+		break;
+	}
 
 	mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
 	if (mode)
@@ -1276,8 +1283,8 @@ static void sd_start(struct gspca_dev *gspca_dev)
 /*			reg1 = 0x44; */
 /*			reg1 = 0x46;	(done) */
 		} else {
-			reg17 = 0x22;	/* 640 MCKSIZE */
-			reg1 = 0x06;
+			reg17 = 0xa2;	/* 640 */
+			reg1 = 0x44;
 		}
 		break;
 	}
@@ -1286,6 +1293,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	switch (sd->sensor) {
 	case SENSOR_OV7630:
 	case SENSOR_OV7648:
+	case SENSOR_OV7660:
 		reg_w(gspca_dev, 0xce, CE_ov76xx, 4);
 		break;
 	default:
-- 
cgit v1.2.3


From da3808e10faca68b064ac897753fa4e1707d29a4 Mon Sep 17 00:00:00 2001
From: Darron Broad <darron@kewl.org>
Date: Tue, 30 Sep 2008 02:46:41 -0300
Subject: V4L/DVB (9099): em28xx: Add detection for K-WORLD DVB-T 310U

Correct firmware type to MTS
Correct audio routing for composite/s-video
Add DVB-T detection.

This patch uses the eeprom hash method for detection as the vendor/product
ids are also used for the DIGIVOX_AD. This may be a clone of the same
product. Explanatory text has been added prior to the hask look-up in
anticipation that it may help others.

The following has been tested to work:
Analogue TV (PAL-I)
Composite In
DVB-T (UK Crystal Palace)
USB AUDIO

The following has not been tested but probably works:
S-Video In

Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 Documentation/video4linux/CARDLIST.em28xx |  2 +-
 drivers/media/video/em28xx/em28xx-cards.c | 26 +++++++++++++++++++++-----
 drivers/media/video/em28xx/em28xx-dvb.c   |  9 +++++++++
 3 files changed, 31 insertions(+), 6 deletions(-)

diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 89c7f32abf9f..53449cb99b17 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -46,7 +46,7 @@
  45 -> Pinnacle PCTV DVB-T                      (em2870)
  46 -> Compro, VideoMate U3                     (em2870)        [185b:2870]
  47 -> KWorld DVB-T 305U                        (em2880)        [eb1a:e305]
- 48 -> KWorld DVB-T 310U                        (em2880)
+ 48 -> KWorld DVB-T 310U                        (em2880)        [eb1a:e310]
  49 -> MSI DigiVox A/D                          (em2880)        [eb1a:e310]
  50 -> MSI DigiVox A/D II                       (em2880)        [eb1a:e320]
  51 -> Terratec Hybrid XS Secam                 (em2880)        [0ccd:004c]
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index c7456e976655..279307cc3adb 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -930,22 +930,23 @@ struct em28xx_board em28xx_boards[] = {
 	},
 	[EM2880_BOARD_KWORLD_DVB_310U] = {
 		.name	      = "KWorld DVB-T 310U",
-		.valid        = EM28XX_BOARD_NOT_VALIDATED,
 		.vchannels    = 3,
 		.tuner_type   = TUNER_XC2028,
+		.has_dvb      = 1,
+		.mts_firmware = 1,
 		.decoder      = EM28XX_TVP5150,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
-			.amux     = 0,
+			.amux     = EM28XX_AMUX_VIDEO,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
-		}, {
+			.amux     = EM28XX_AMUX_AC97_LINE_IN,
+		}, {	/* S-video has not been tested yet */
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-			.amux     = 1,
+			.amux     = EM28XX_AMUX_AC97_LINE_IN,
 		} },
 	},
 	[EM2881_BOARD_DNT_DA2_HYBRID] = {
@@ -1260,6 +1261,7 @@ static struct em28xx_reg_seq em2882_terratec_hybrid_xs_digital[] = {
 static struct em28xx_hash_table em28xx_eeprom_hash [] = {
 	/* P/N: SA 60002070465 Tuner: TVF7533-MF */
 	{0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
+	{0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
 };
 
 /* I2C devicelist hash table for devices with generic USB IDs */
@@ -1745,6 +1747,20 @@ void em28xx_card_setup(struct em28xx *dev)
 		break;
 	case EM2820_BOARD_UNKNOWN:
 	case EM2800_BOARD_UNKNOWN:
+		/*
+		 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
+		 *
+		 * This occurs because they share identical USB vendor and
+		 * product IDs.
+		 *
+		 * What we do here is look up the EEPROM hash of the K-WORLD
+		 * and if it is found then we decide that we do not have
+		 * a DIGIVOX and reset the device to the K-WORLD instead.
+		 *
+		 * This solution is only valid if they do not share eeprom
+		 * hash identities which has not been determined as yet.
+		 */
+	case EM2880_BOARD_MSI_DIGIVOX_AD:
 		if (!em28xx_hint_board(dev))
 			em28xx_set_model(dev);
 		break;
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index 4b992bc0083c..d2b1a1a52689 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -452,6 +452,15 @@ static int dvb_init(struct em28xx *dev)
 			goto out_free;
 		}
 		break;
+	case EM2880_BOARD_KWORLD_DVB_310U:
+		dvb->frontend = dvb_attach(zl10353_attach,
+						&em28xx_zl10353_with_xc3028,
+						&dev->i2c_adap);
+		if (attach_xc3028(0x61, dev) < 0) {
+			result = -EINVAL;
+			goto out_free;
+		}
+		break;
 	default:
 		printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card"
 				" isn't supported yet\n",
-- 
cgit v1.2.3


From db98fb8b5b9210ba3b14fb984a26060e4afdb9f5 Mon Sep 17 00:00:00 2001
From: Wiktor Grebla <greblus@gmail.com>
Date: Sun, 28 Sep 2008 01:37:48 -0300
Subject: V4L/DVB (9103): em28xx: HVR-900 B3C0 - fix audio clicking issue

Fixed audio clicking problem which could be heard when using analog tv or composite input

Signed-off-by: Wiktor Grebla <greblus@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/em28xx-audio.c | 4 ++--
 drivers/media/video/em28xx/em28xx-cards.c | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c
index 08cb4e7711a5..ac3292d7646c 100644
--- a/drivers/media/video/em28xx/em28xx-audio.c
+++ b/drivers/media/video/em28xx/em28xx-audio.c
@@ -117,10 +117,10 @@ static void em28xx_audio_isocirq(struct urb *urb)
 
 			if (oldptr + length >= runtime->buffer_size) {
 				unsigned int cnt =
-				    runtime->buffer_size - oldptr - 1;
+				    runtime->buffer_size - oldptr;
 				memcpy(runtime->dma_area + oldptr * stride, cp,
 				       cnt * stride);
-				memcpy(runtime->dma_area, cp + cnt,
+				memcpy(runtime->dma_area, cp + cnt * stride,
 				       length * stride - cnt * stride);
 			} else {
 				memcpy(runtime->dma_area + oldptr * stride, cp,
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 279307cc3adb..de943cf6c169 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -577,7 +577,7 @@ struct em28xx_board em28xx_boards[] = {
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
-			.amux     = 1,
+			.amux     = 3,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
-- 
cgit v1.2.3


From d99e90164e6cf2eb85fa94d547d6336f8127a107 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yhlu.kernel@gmail.com>
Date: Sat, 4 Oct 2008 15:55:12 -0700
Subject: x86: gart iommu have direct mapping when agp is present too

move init_memory_mapping() out of init_k8_gatt.

for: http://bugzilla.kernel.org/show_bug.cgi?id=11676
    2.6.27-rc2 to rc8, apgart fails, iommu=soft works, regression

This is needed because we need to map the GART aperture even
if the GATT is not initialized.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/pci-gart_64.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index 49285f8fd4d5..be33a5442d82 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -626,7 +626,6 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 	struct pci_dev *dev;
 	void *gatt;
 	int i, error;
-	unsigned long start_pfn, end_pfn;
 
 	printk(KERN_INFO "PCI-DMA: Disabling AGP.\n");
 	aper_size = aper_base = info->aper_size = 0;
@@ -672,12 +671,6 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 	printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n",
 	       aper_base, aper_size>>10);
 
-	/* need to map that range */
-	end_pfn = (aper_base>>PAGE_SHIFT) + (aper_size>>PAGE_SHIFT);
-	if (end_pfn > max_low_pfn_mapped) {
-		start_pfn = (aper_base>>PAGE_SHIFT);
-		init_memory_mapping(start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT);
-	}
 	return 0;
 
  nommu:
@@ -727,7 +720,8 @@ void __init gart_iommu_init(void)
 {
 	struct agp_kern_info info;
 	unsigned long iommu_start;
-	unsigned long aper_size;
+	unsigned long aper_base, aper_size;
+	unsigned long start_pfn, end_pfn;
 	unsigned long scratch;
 	long i;
 
@@ -765,8 +759,16 @@ void __init gart_iommu_init(void)
 		return;
 	}
 
+	/* need to map that range */
+	aper_size = info.aper_size << 20;
+	aper_base = info.aper_base;
+	end_pfn = (aper_base>>PAGE_SHIFT) + (aper_size>>PAGE_SHIFT);
+	if (end_pfn > max_low_pfn_mapped) {
+		start_pfn = (aper_base>>PAGE_SHIFT);
+		init_memory_mapping(start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT);
+	}
+
 	printk(KERN_INFO "PCI-DMA: using GART IOMMU.\n");
-	aper_size = info.aper_size * 1024 * 1024;
 	iommu_size = check_iommu_size(info.aper_base, aper_size);
 	iommu_pages = iommu_size >> PAGE_SHIFT;
 
-- 
cgit v1.2.3


From f20f258603ebc5da91e76884cf0c0d7ac9804b1c Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Sun, 5 Oct 2008 18:23:27 +0200
Subject: ide-cd: temporary tray close fix

This one fixes http://bugzilla.kernel.org/show_bug.cgi?id=11602.

A more generic fix for drives which cannot autoclose tray will follow.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
[bart: add an extra parentheses for consistency with the rest of kernel code]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-cd.c | 5 ++++-
 include/linux/ide.h  | 4 +++-
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 49a8c589e346..e1cd7d520fc0 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1661,7 +1661,9 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
 		cdi->mask &= ~CDC_PLAY_AUDIO;
 
 	mechtype = buf[8 + 6] >> 5;
-	if (mechtype == mechtype_caddy || mechtype == mechtype_popup)
+	if (mechtype == mechtype_caddy ||
+	    mechtype == mechtype_popup ||
+	    (drive->atapi_flags & IDE_AFLAG_NO_AUTOCLOSE))
 		cdi->mask |= CDC_CLOSE_TRAY;
 
 	if (cdi->sanyo_slot > 0) {
@@ -1859,6 +1861,7 @@ static const struct cd_list_entry ide_cd_quirks_list[] = {
 	{ "MATSHITADVD-ROM SR-8176", NULL,   IDE_AFLAG_PLAY_AUDIO_OK	     },
 	{ "MATSHITADVD-ROM SR-8174", NULL,   IDE_AFLAG_PLAY_AUDIO_OK	     },
 	{ "Optiarc DVD RW AD-5200A", NULL,   IDE_AFLAG_PLAY_AUDIO_OK	     },
+	{ "Optiarc DVD RW AD-7543A", NULL,   IDE_AFLAG_NO_AUTOCLOSE	     },
 	{ NULL, NULL, 0 }
 };
 
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 1524829f73f2..6514db8fd2e4 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -366,7 +366,9 @@ enum {
 	/* Currently on a filemark */
 	IDE_AFLAG_FILEMARK		= (1 << 25),
 	/* 0 = no tape is loaded, so we don't rewind after ejecting */
-	IDE_AFLAG_MEDIUM_PRESENT	= (1 << 26)
+	IDE_AFLAG_MEDIUM_PRESENT	= (1 << 26),
+
+	IDE_AFLAG_NO_AUTOCLOSE		= (1 << 27),
 };
 
 struct ide_drive_s {
-- 
cgit v1.2.3


From 22e05b4549bf2405d6aca128540b20cd2dd33f1f Mon Sep 17 00:00:00 2001
From: Sergei Shtylylov <sshtylyov@ru.mvista.com>
Date: Sun, 5 Oct 2008 18:23:27 +0200
Subject: ide-dma: fix ide_build_dmatable() for TRM290

Apparently, 'xcount' being 0 does not mean 0 bytes for TRM290; it means 4 bytes,
judging from the code immediately preceding this check.  So, we must never try
to "split" the PRD for TRM290.

This is probably never hit anyway -- with the DMA buffers aligned to at least
512 bytes and ATAPI DMA not being used for non block I/O commands...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index adc682755857..3fa07c0aeaa4 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -211,7 +211,7 @@ int ide_build_dmatable (ide_drive_t *drive, struct request *rq)
 				xcount = bcount & 0xffff;
 				if (is_trm290)
 					xcount = ((xcount >> 2) - 1) << 16;
-				if (xcount == 0x0000) {
+				else if (xcount == 0x0000) {
 	/* 
 	 * Most chipsets correctly interpret a length of 0x0000 as 64KB,
 	 * but at least one (e.g. CS5530) misinterprets it as zero (!).
-- 
cgit v1.2.3


From 2fef357cf391b56b8b6952a412f7324e50427a77 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Sun, 5 Oct 2008 18:23:28 +0200
Subject: IDE: Fix platform device registration in Swarm IDE driver (v2)

The Swarm IDE driver uses a release method which is defined in the driver
itself thus potentially oopsable.  The simple fix would be to just leak
the device but this patch goes the full length and moves the entire
handling of the platform device in the platform code and retains only
the platform driver code in drivers/ide/mips/swarm.c.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
[bart: remove no longer needed BLK_DEV_IDE_SWARM from ide/Kconfig]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 arch/mips/sibyte/swarm/Makefile   |   3 +-
 arch/mips/sibyte/swarm/platform.c |  81 ++++++++++++++++
 drivers/ide/Kconfig               |   4 -
 drivers/ide/mips/Makefile         |   1 -
 drivers/ide/mips/swarm.c          | 197 --------------------------------------
 5 files changed, 83 insertions(+), 203 deletions(-)
 create mode 100644 arch/mips/sibyte/swarm/platform.c
 delete mode 100644 drivers/ide/mips/swarm.c

diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile
index f18ba9201bbc..7b45f199d92a 100644
--- a/arch/mips/sibyte/swarm/Makefile
+++ b/arch/mips/sibyte/swarm/Makefile
@@ -1,3 +1,4 @@
-obj-y				:= setup.o rtc_xicor1241.o rtc_m41t81.o
+obj-y				:= platform.o setup.o rtc_xicor1241.o \
+				   rtc_m41t81.o
 
 obj-$(CONFIG_I2C_BOARDINFO)	+= swarm-i2c.o
diff --git a/arch/mips/sibyte/swarm/platform.c b/arch/mips/sibyte/swarm/platform.c
new file mode 100644
index 000000000000..dd0e5b9b64e8
--- /dev/null
+++ b/arch/mips/sibyte/swarm/platform.c
@@ -0,0 +1,81 @@
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+
+#include <asm/sibyte/board.h>
+#include <asm/sibyte/sb1250_genbus.h>
+#include <asm/sibyte/sb1250_regs.h>
+
+#define DRV_NAME	"pata-swarm"
+
+#define SWARM_IDE_SHIFT	5
+#define SWARM_IDE_BASE	0x1f0
+#define SWARM_IDE_CTRL	0x3f6
+
+static struct resource swarm_pata_resource[] = {
+	{
+		.name	= "Swarm GenBus IDE",
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "Swarm GenBus IDE",
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "Swarm GenBus IDE",
+		.flags	= IORESOURCE_IRQ,
+		.start	= K_INT_GB_IDE,
+		.end	= K_INT_GB_IDE,
+	},
+};
+
+static struct pata_platform_info pata_platform_data = {
+	.ioport_shift	= SWARM_IDE_SHIFT,
+};
+
+static struct platform_device swarm_pata_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.resource	= swarm_pata_resource,
+	.num_resources	= ARRAY_SIZE(swarm_pata_resource),
+	.dev  = {
+		.platform_data		= &pata_platform_data,
+		.coherent_dma_mask	= ~0,	/* grumble */
+	},
+};
+
+static int __init swarm_pata_init(void)
+{
+	u8 __iomem *base;
+	phys_t offset, size;
+	struct resource *r;
+
+	if (!SIBYTE_HAVE_IDE)
+		return -ENODEV;
+
+	base = ioremap(A_IO_EXT_BASE, 0x800);
+	offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS));
+	size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS));
+	iounmap(base);
+
+	offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE;
+	size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE;
+	if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) {
+		pr_info(DRV_NAME ": PATA interface at GenBus disabled\n");
+
+		return -EBUSY;
+	}
+
+	pr_info(DRV_NAME ": PATA interface at GenBus slot %i\n", IDE_CS);
+
+	r = swarm_pata_resource;
+	r[0].start = offset + (SWARM_IDE_BASE << SWARM_IDE_SHIFT);
+	r[0].end   = offset + ((SWARM_IDE_BASE + 8) << SWARM_IDE_SHIFT) - 1;
+	r[1].start = offset + (SWARM_IDE_CTRL << SWARM_IDE_SHIFT);
+	r[1].end   = offset + ((SWARM_IDE_CTRL + 1) << SWARM_IDE_SHIFT) - 1;
+
+	return platform_device_register(&swarm_pata_device);
+}
+
+device_initcall(swarm_pata_init);
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 8e93a797c93d..052879a6f853 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -780,10 +780,6 @@ config BLK_DEV_IDEDMA_PMAC
 	  to transfer data to and from memory.  Saying Y is safe and improves
 	  performance.
 
-config BLK_DEV_IDE_SWARM
-	tristate "IDE for Sibyte evaluation boards"
-	depends on SIBYTE_SB1xxx_SOC
-
 config BLK_DEV_IDE_AU1XXX
        bool "IDE for AMD Alchemy Au1200"
        depends on SOC_AU1200
diff --git a/drivers/ide/mips/Makefile b/drivers/ide/mips/Makefile
index 677c7b2bac92..5873fa0b8769 100644
--- a/drivers/ide/mips/Makefile
+++ b/drivers/ide/mips/Makefile
@@ -1,4 +1,3 @@
-obj-$(CONFIG_BLK_DEV_IDE_SWARM)		+= swarm.o
 obj-$(CONFIG_BLK_DEV_IDE_AU1XXX)	+= au1xxx-ide.o
 
 EXTRA_CFLAGS    := -Idrivers/ide
diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c
deleted file mode 100644
index 39c9ee995857..000000000000
--- a/drivers/ide/mips/swarm.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * Copyright (C) 2001, 2002, 2003 Broadcom Corporation
- * Copyright (C) 2004 MontaVista Software Inc.
- *	Author:	Manish Lachwani, mlachwani@mvista.com
- * Copyright (C) 2004  MIPS Technologies, Inc.  All rights reserved.
- *	Author: Maciej W. Rozycki <macro@mips.com>
- * Copyright (c) 2006, 2008  Maciej W. Rozycki
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-/*
- *  Derived loosely from ide-pmac.c, so:
- *  Copyright (C) 1998 Paul Mackerras.
- *  Copyright (C) 1995-1998 Mark Lord
- */
-
-/*
- * Boards with SiByte processors so far have supported IDE devices via
- * the Generic Bus, PCI bus, and built-in PCMCIA interface.  In all
- * cases, byte-swapping must be avoided for these devices (whereas
- * other PCI devices, for example, will require swapping).  Any
- * SiByte-targetted kernel including IDE support will include this
- * file.  Probing of a Generic Bus for an IDE device is controlled by
- * the definition of "SIBYTE_HAVE_IDE", which is provided by
- * <asm/sibyte/board.h> for Broadcom boards.
- */
-
-#include <linux/ide.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-
-#include <asm/io.h>
-
-#include <asm/sibyte/board.h>
-#include <asm/sibyte/sb1250_genbus.h>
-#include <asm/sibyte/sb1250_regs.h>
-
-#define DRV_NAME "ide-swarm"
-
-static char swarm_ide_string[] = DRV_NAME;
-
-static struct resource swarm_ide_resource = {
-	.name	= "SWARM GenBus IDE",
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device *swarm_ide_dev;
-
-static const struct ide_port_info swarm_port_info = {
-	.name			= DRV_NAME,
-	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
-};
-
-/*
- * swarm_ide_probe - if the board header indicates the existence of
- * Generic Bus IDE, allocate a HWIF for it.
- */
-static int __devinit swarm_ide_probe(struct device *dev)
-{
-	u8 __iomem *base;
-	struct ide_host *host;
-	phys_t offset, size;
-	int i, rc;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-
-	if (!SIBYTE_HAVE_IDE)
-		return -ENODEV;
-
-	base = ioremap(A_IO_EXT_BASE, 0x800);
-	offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS));
-	size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS));
-	iounmap(base);
-
-	offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE;
-	size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE;
-	if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) {
-		printk(KERN_INFO DRV_NAME
-		       ": IDE interface at GenBus disabled\n");
-		return -EBUSY;
-	}
-
-	printk(KERN_INFO DRV_NAME ": IDE interface at GenBus slot %i\n",
-	       IDE_CS);
-
-	swarm_ide_resource.start = offset;
-	swarm_ide_resource.end = offset + size - 1;
-	if (request_resource(&iomem_resource, &swarm_ide_resource)) {
-		printk(KERN_ERR DRV_NAME
-		       ": can't request I/O memory resource\n");
-		return -EBUSY;
-	}
-
-	base = ioremap(offset, size);
-
-	memset(&hw, 0, sizeof(hw));
-	for (i = 0; i <= 7; i++)
-		hw.io_ports_array[i] =
-				(unsigned long)(base + ((0x1f0 + i) << 5));
-	hw.io_ports.ctl_addr =
-				(unsigned long)(base + (0x3f6 << 5));
-	hw.irq = K_INT_GB_IDE;
-	hw.chipset = ide_generic;
-
-	rc = ide_host_add(&swarm_port_info, hws, &host);
-	if (rc)
-		goto err;
-
-	dev_set_drvdata(dev, host);
-
-	return 0;
-err:
-	release_resource(&swarm_ide_resource);
-	iounmap(base);
-	return rc;
-}
-
-static struct device_driver swarm_ide_driver = {
-	.name	= swarm_ide_string,
-	.bus	= &platform_bus_type,
-	.probe	= swarm_ide_probe,
-};
-
-static void swarm_ide_platform_release(struct device *device)
-{
-	struct platform_device *pldev;
-
-	/* free device */
-	pldev = to_platform_device(device);
-	kfree(pldev);
-}
-
-static int __devinit swarm_ide_init_module(void)
-{
-	struct platform_device *pldev;
-	int err;
-
-	printk(KERN_INFO "SWARM IDE driver\n");
-
-	if (driver_register(&swarm_ide_driver)) {
-		printk(KERN_ERR "Driver registration failed\n");
-		err = -ENODEV;
-		goto out;
-	}
-
-        if (!(pldev = kzalloc(sizeof (*pldev), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto out_unregister_driver;
-	}
-
-	pldev->name		= swarm_ide_string;
-	pldev->id		= 0;
-	pldev->dev.release	= swarm_ide_platform_release;
-
-	if (platform_device_register(pldev)) {
-		err = -ENODEV;
-		goto out_free_pldev;
-	}
-
-        if (!pldev->dev.driver) {
-		/*
-		 * The driver was not bound to this device, there was
-                 * no hardware at this address. Unregister it, as the
-		 * release fuction will take care of freeing the
-		 * allocated structure
-		 */
-		platform_device_unregister (pldev);
-	}
-
-	swarm_ide_dev = pldev;
-
-	return 0;
-
-out_free_pldev:
-	kfree(pldev);
-
-out_unregister_driver:
-	driver_unregister(&swarm_ide_driver);
-out:
-	return err;
-}
-
-module_init(swarm_ide_init_module);
-- 
cgit v1.2.3


From f3e85ee70a8dd18e6ffa933ae4065a7031837cf3 Mon Sep 17 00:00:00 2001
From: Bodo Eggert <7eggert@gmx.de>
Date: Sun, 5 Oct 2008 18:23:28 +0200
Subject: ide-cd: Optiarc DVD RW AD-7200A does play audio

The Optiarc DVD RW AD-7200A can play audio, but tells it could not.

Signed-off-by: Bodo Eggert <7eggert@gmx.de>
Tested-by: Nick Warne <nick@ukfsn.org>
Received-from: Borislav Petkov <petkovbb@googlemail.com>
[bart: keep "audio" quirks together]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-cd.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index e1cd7d520fc0..f16bb4667238 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1861,6 +1861,7 @@ static const struct cd_list_entry ide_cd_quirks_list[] = {
 	{ "MATSHITADVD-ROM SR-8176", NULL,   IDE_AFLAG_PLAY_AUDIO_OK	     },
 	{ "MATSHITADVD-ROM SR-8174", NULL,   IDE_AFLAG_PLAY_AUDIO_OK	     },
 	{ "Optiarc DVD RW AD-5200A", NULL,   IDE_AFLAG_PLAY_AUDIO_OK	     },
+	{ "Optiarc DVD RW AD-7200A", NULL,   IDE_AFLAG_PLAY_AUDIO_OK	     },
 	{ "Optiarc DVD RW AD-7543A", NULL,   IDE_AFLAG_NO_AUTOCLOSE	     },
 	{ NULL, NULL, 0 }
 };
-- 
cgit v1.2.3


From ca09a237b8c6b053e101a4a83bc30d2c48435bd5 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Sun, 5 Oct 2008 18:23:28 +0200
Subject: ide: workaround for bogus gcc warning in ide_sysfs_register_port()

Reported-by: "Steven Noonan" <steven@uplinklabs.net>
Suggested-by: "Elias Oltmanns" <eo@nebensachen.de>
Cc: mingo@elte.hu
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-probe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 994e41099b42..a51a30e9eab3 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1492,7 +1492,7 @@ static struct device_attribute *ide_port_attrs[] = {
 
 static int ide_sysfs_register_port(ide_hwif_t *hwif)
 {
-	int i, rc;
+	int i, uninitialized_var(rc);
 
 	for (i = 0; ide_port_attrs[i]; i++) {
 		rc = device_create_file(hwif->portdev, ide_port_attrs[i]);
-- 
cgit v1.2.3


From 4a16ff4c692d49f0caeabe08e6d3ae28a0ad4d04 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Sat, 4 Oct 2008 00:06:29 +0100
Subject: [MIPS] Fix CMP Kconfig configuration and mark as broken.

Because sync-r4k.c doesn't build.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig | 27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index c930b8ceb418..1e06d233fa83 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -211,6 +211,7 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_MIPS_CMP if BROKEN	# because SYNC_R4K is broken
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_SMARTMIPS
 	help
@@ -1499,6 +1500,18 @@ config MIPS_APSP_KSPD
 	  "exit" syscall notifying other kernel modules the SP program is
 	  exiting.  You probably want to say yes here.
 
+config MIPS_CMP
+	bool "MIPS CMP framework support"
+	depends on SYS_SUPPORTS_MIPS_CMP
+	select SYNC_R4K if BROKEN
+	select SYS_SUPPORTS_SMP
+	select SYS_SUPPORTS_SCHED_SMT if SMP
+	select WEAK_ORDERING
+	default n
+	help
+	  This is a placeholder option for the GCMP work. It will need to
+	  be handled differently...
+
 config SB1_PASS_1_WORKAROUNDS
 	bool
 	depends on CPU_SB1_PASS_1
@@ -1675,6 +1688,9 @@ config SMP
 config SMP_UP
 	bool
 
+config SYS_SUPPORTS_MIPS_CMP
+	bool
+
 config SYS_SUPPORTS_SMP
 	bool
 
@@ -1722,17 +1738,6 @@ config NR_CPUS
 	  performance should round up your number of processors to the next
 	  power of two.
 
-config MIPS_CMP
-	bool "MIPS CMP framework support"
-	depends on SMP
-	select SYNC_R4K
-	select SYS_SUPPORTS_SCHED_SMT
-	select WEAK_ORDERING
-	default n
-	help
-	  This is a placeholder option for the GCMP work. It will need to
-	  be handled differently...
-
 source "kernel/time/Kconfig"
 
 #
-- 
cgit v1.2.3


From fd3d2764ee5aad862e51c21b8239561acdea8c2f Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Fri, 3 Oct 2008 22:43:38 +0100
Subject: [MIPS] IP27: Fix build errors if CONFIG_MAPPED_KERNEL=y

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/head.S             | 1 +
 include/asm-mips/sn/mapped_kernel.h | 8 ++++----
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index 361364501d34..492a0a8d70fb 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -22,6 +22,7 @@
 #include <asm/irqflags.h>
 #include <asm/regdef.h>
 #include <asm/page.h>
+#include <asm/pgtable-bits.h>
 #include <asm/mipsregs.h>
 #include <asm/stackframe.h>
 
diff --git a/include/asm-mips/sn/mapped_kernel.h b/include/asm-mips/sn/mapped_kernel.h
index c3dd5d0d525f..721496a0bb92 100644
--- a/include/asm-mips/sn/mapped_kernel.h
+++ b/include/asm-mips/sn/mapped_kernel.h
@@ -5,6 +5,8 @@
 #ifndef __ASM_SN_MAPPED_KERNEL_H
 #define __ASM_SN_MAPPED_KERNEL_H
 
+#include <linux/mmzone.h>
+
 /*
  * Note on how mapped kernels work: the text and data section is
  * compiled at cksseg segment (LOADADDR = 0xc001c000), and the
@@ -29,10 +31,8 @@
 #define MAPPED_ADDR_RO_TO_PHYS(x)	(x - REP_BASE)
 #define MAPPED_ADDR_RW_TO_PHYS(x)	(x - REP_BASE - 16777216)
 
-#define MAPPED_KERN_RO_PHYSBASE(n) \
-			(PLAT_NODE_DATA(n)->kern_vars.kv_ro_baseaddr)
-#define MAPPED_KERN_RW_PHYSBASE(n) \
-			(PLAT_NODE_DATA(n)->kern_vars.kv_rw_baseaddr)
+#define MAPPED_KERN_RO_PHYSBASE(n) (hub_data(n)->kern_vars.kv_ro_baseaddr)
+#define MAPPED_KERN_RW_PHYSBASE(n) (hub_data(n)->kern_vars.kv_rw_baseaddr)
 
 #define MAPPED_KERN_RO_TO_PHYS(x) \
 				((unsigned long)MAPPED_ADDR_RO_TO_PHYS(x) | \
-- 
cgit v1.2.3


From 36010ff6788a058147ae15a1aebf97fd30fa51a9 Mon Sep 17 00:00:00 2001
From: Marcel Holtmann <marcel@holtmann.org>
Date: Mon, 6 Oct 2008 12:22:51 +0200
Subject: [Bluetooth] Fix double frees on error paths of btusb and bpa10x
 drivers

The transfer buffer of an URB will be automatically freed when using
the URB_FREE_BUFFER transfer_flag. So the extra calls to kfree() will
cause a double free.

Reported-by: Justin Mattock <justinmattock@gmail.com>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/bpa10x.c | 2 --
 drivers/bluetooth/btusb.c  | 3 ---
 2 files changed, 5 deletions(-)

diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c
index 1e55a658e6ce..32f3a8ed8d3d 100644
--- a/drivers/bluetooth/bpa10x.c
+++ b/drivers/bluetooth/bpa10x.c
@@ -256,7 +256,6 @@ static inline int bpa10x_submit_intr_urb(struct hci_dev *hdev)
 		BT_ERR("%s urb %p submission failed (%d)",
 						hdev->name, urb, -err);
 		usb_unanchor_urb(urb);
-		kfree(buf);
 	}
 
 	usb_free_urb(urb);
@@ -298,7 +297,6 @@ static inline int bpa10x_submit_bulk_urb(struct hci_dev *hdev)
 		BT_ERR("%s urb %p submission failed (%d)",
 						hdev->name, urb, -err);
 		usb_unanchor_urb(urb);
-		kfree(buf);
 	}
 
 	usb_free_urb(urb);
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 29ae99817c60..262e9bebebc9 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -271,7 +271,6 @@ static int btusb_submit_intr_urb(struct hci_dev *hdev)
 		BT_ERR("%s urb %p submission failed (%d)",
 						hdev->name, urb, -err);
 		usb_unanchor_urb(urb);
-		kfree(buf);
 	}
 
 	usb_free_urb(urb);
@@ -354,7 +353,6 @@ static int btusb_submit_bulk_urb(struct hci_dev *hdev)
 		BT_ERR("%s urb %p submission failed (%d)",
 						hdev->name, urb, -err);
 		usb_unanchor_urb(urb);
-		kfree(buf);
 	}
 
 	usb_free_urb(urb);
@@ -475,7 +473,6 @@ static int btusb_submit_isoc_urb(struct hci_dev *hdev)
 		BT_ERR("%s urb %p submission failed (%d)",
 						hdev->name, urb, -err);
 		usb_unanchor_urb(urb);
-		kfree(buf);
 	}
 
 	usb_free_urb(urb);
-- 
cgit v1.2.3


From 4f62f6cb93a58f77056daed73a7700fe467f7eb3 Mon Sep 17 00:00:00 2001
From: Marcel Holtmann <marcel@holtmann.org>
Date: Mon, 6 Oct 2008 12:22:51 +0200
Subject: [Bluetooth] Add reset quirk for new Targus and Belkin dongles

Targus and Belkin have come out with new Bluetooth 2.1 capable dongles
using the latest BCM2046 chip from Broadcom. Both of them are so called
HID proxy dongles and they need to send HCI_Reset before they become
fully operational.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/btusb.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 262e9bebebc9..3f94af7b8461 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -113,6 +113,7 @@ static struct usb_device_id blacklist_table[] = {
 
 	/* Targus ACB10US */
 	{ USB_DEVICE(0x0a5c, 0x2100), .driver_info = BTUSB_RESET },
+	{ USB_DEVICE(0x0a5c, 0x2154), .driver_info = BTUSB_RESET },
 
 	/* ANYCOM Bluetooth USB-200 and USB-250 */
 	{ USB_DEVICE(0x0a5c, 0x2111), .driver_info = BTUSB_RESET },
@@ -150,6 +151,9 @@ static struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
 	{ USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
 
+	/* Belkin F8T016 device */
+	{ USB_DEVICE(0x050d, 0x016a), .driver_info = BTUSB_RESET },
+
 	/* Digianswer devices */
 	{ USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER },
 	{ USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE },
-- 
cgit v1.2.3


From 1305e9e7991d6c6b6aaa6e45f3f87363e6a66604 Mon Sep 17 00:00:00 2001
From: Marcel Holtmann <marcel@holtmann.org>
Date: Mon, 6 Oct 2008 12:22:52 +0200
Subject: [Bluetooth] Add reset quirk for A-Link BlueUSB21 dongle

The new A-Link Bluetooth dongle is another one based on the BCM2046 chip
from Broadcom and it also needs to send HCI_Reset before it becomes fully
operational. Without the quirk it will show a lot of I/O errors.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/btusb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 3f94af7b8461..af472e052732 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -102,6 +102,7 @@ static struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
 
 	/* Broadcom BCM2046 */
+	{ USB_DEVICE(0x0a5c, 0x2146), .driver_info = BTUSB_RESET },
 	{ USB_DEVICE(0x0a5c, 0x2151), .driver_info = BTUSB_RESET },
 
 	/* Apple MacBook Pro with Broadcom chip */
-- 
cgit v1.2.3


From e84956f92a846246b09b34f2a728329c386d250f Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Mon, 6 Oct 2008 11:59:29 +0200
Subject: x86 ACPI: Blacklist two HP machines with buggy BIOSes

There is a bug in the BIOSes of some HP boxes with AMD Turions which
connects IO-APIC pins with ACPI thermal trip points in such a way that
if the state of the IO-APIC is not as expected by the (buggy) BIOS, the
thermal trip points are set to insanely low values (usually all of them
become 16 degrees Celsius).  As a result, thermal throttling kicks in
and knock the system down to its shoes.

Unfortunately some of the recent IO-APIC changes made the bug show up.
To prevent this from happening, blacklist machines that are known to be
affected (nx6115 and 6715b in this particular case).

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=11516 listed as
a regression from 2.6.26.

On my box it was caused by:

commit 691874fa96d6349a8b60f8ea9c2bae52ece79941
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date:   Tue May 27 21:19:51 2008 +0100

    x86: I/O APIC: timer through 8259A second-chance

    Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
    Signed-off-by: Ingo Molnar <mingo@elte.hu>

and the whole story is described in this (huge) thread:

    http://marc.info/?l=linux-kernel&m=121358440508410&w=4

Matthew Garrett told us about that happening on the nx6125:

    http://marc.info/?l=linux-kernel&m=121396307411930&w=4

and then Maciej analysed the breakage on the basis of a DSDT from the
nx6325:

    http://marc.info/?l=linux-kernel&m=121401068718826&w=4

As far as the Dmitry's and Jason's boxes are concerned, I recognized the
symptoms and asked them to verify that the blacklisting helped.

It appears that the buggy BIOS code has been copy-pasted to the entire
range of machines, for no good reason.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Jason Vas Dias <jason.vas.dias@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/acpi/boot.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index bfd10fd211cd..c102af85df9c 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1603,6 +1603,14 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 	 * is not connected at all.  Force ignoring BIOS IRQ0 pin2
 	 * override in that cases.
 	 */
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "HP nx6115 laptop",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6115"),
+		     },
+	 },
 	{
 	 .callback = dmi_ignore_irq0_timer_override,
 	 .ident = "HP NX6125 laptop",
@@ -1619,6 +1627,14 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"),
 		     },
 	 },
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "HP 6715b laptop",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"),
+		     },
+	 },
 	{}
 };
 
-- 
cgit v1.2.3


From e85ceae9102f6e3c1d707e7ac88fa48d252e9cfa Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@siemens.com>
Date: Mon, 6 Oct 2008 13:50:59 -0500
Subject: kgdb, x86: Avoid invoking kgdb_nmicallback twice per NMI

Stress-testing KVM's latest NMI support with kgdbts inside an SMP guest,
I came across spurious unhandled NMIs while running the singlestep test.
Looking closer at the code path each NMI takes when KGDB is enabled, I
noticed that kgdb_nmicallback is called twice per event: One time via
DIE_NMI_IPI notification, the second time on DIE_NMI. Removing the first
invocation cures the unhandled NMIs here.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
 arch/x86/kernel/kgdb.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index 8282a2139681..10435a120d22 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -455,12 +455,7 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd)
 		return NOTIFY_DONE;
 
 	case DIE_NMI_IPI:
-		if (atomic_read(&kgdb_active) != -1) {
-			/* KGDB CPU roundup */
-			kgdb_nmicallback(raw_smp_processor_id(), regs);
-			was_in_debug_nmi[raw_smp_processor_id()] = 1;
-			touch_nmi_watchdog();
-		}
+		/* Just ignore, we will handle the roundup on DIE_NMI. */
 		return NOTIFY_DONE;
 
 	case DIE_NMIUNKNOWN:
-- 
cgit v1.2.3


From cc1e0f4f7ad95a9eb81e1904cb16068af226180d Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Mon, 6 Oct 2008 13:50:59 -0500
Subject: kgdb: call touch_softlockup_watchdog on resume

The softlockup watchdog needs to be touched when resuming the from the
kgdb stopped state to avoid the printk that a CPU is stuck if the
debugger was active for longer than the softlockup threshold.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
 kernel/kgdb.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/kernel/kgdb.c b/kernel/kgdb.c
index 25d955dbb989..e4dcfb2272a4 100644
--- a/kernel/kgdb.c
+++ b/kernel/kgdb.c
@@ -590,6 +590,7 @@ static void kgdb_wait(struct pt_regs *regs)
 
 	/* Signal the primary CPU that we are done: */
 	atomic_set(&cpu_in_kgdb[cpu], 0);
+	touch_softlockup_watchdog();
 	clocksource_touch_watchdog();
 	local_irq_restore(flags);
 }
@@ -1432,6 +1433,7 @@ acquirelock:
 	    atomic_read(&kgdb_cpu_doing_single_step) != cpu) {
 
 		atomic_set(&kgdb_active, -1);
+		touch_softlockup_watchdog();
 		clocksource_touch_watchdog();
 		local_irq_restore(flags);
 
@@ -1524,6 +1526,7 @@ acquirelock:
 kgdb_restore:
 	/* Free kgdb_active */
 	atomic_set(&kgdb_active, -1);
+	touch_softlockup_watchdog();
 	clocksource_touch_watchdog();
 	local_irq_restore(flags);
 
-- 
cgit v1.2.3


From 88a944eef8a4f9a2ca647eb16202a2b63f8ba7cd Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Mon, 6 Oct 2008 12:48:29 -0700
Subject: Revert "ax25: Fix std timer socket destroy handling."

This reverts commit 30902dc3cb0ea1cfc7ac2b17bcf478ff98420d74.

It causes all kinds of problems, based upon a report by
Bernard (f6bvp) and analysis by Jarek Poplawski.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ax25/ax25_std_timer.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/net/ax25/ax25_std_timer.c b/net/ax25/ax25_std_timer.c
index cdc7e751ef36..96e4b9273250 100644
--- a/net/ax25/ax25_std_timer.c
+++ b/net/ax25/ax25_std_timer.c
@@ -39,9 +39,11 @@ void ax25_std_heartbeat_expiry(ax25_cb *ax25)
 
 	switch (ax25->state) {
 	case AX25_STATE_0:
-		if (!sk ||
-		    sock_flag(sk, SOCK_DESTROY) ||
-		    sock_flag(sk, SOCK_DEAD)) {
+		/* Magic here: If we listen() and a new link dies before it
+		   is accepted() it isn't 'dead' so doesn't get removed. */
+		if (!sk || sock_flag(sk, SOCK_DESTROY) ||
+		    (sk->sk_state == TCP_LISTEN &&
+		     sock_flag(sk, SOCK_DEAD))) {
 			if (sk) {
 				sock_hold(sk);
 				ax25_destroy_socket(ax25);
-- 
cgit v1.2.3


From 33d1d2c52c3befa6c4df33b4ba58137d1c48894b Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Mon, 6 Oct 2008 12:53:50 -0700
Subject: ax25: Quick fix for making sure unaccepted sockets get destroyed.

Since we reverted 30902dc3cb0ea1cfc7ac2b17bcf478ff98420d74 ("ax25: Fix
std timer socket destroy handling.") we have to put some kind of fix
in to cure the issue whereby unaccepted connections do not get destroyed.

The approach used here is from Tihomir Heidelberg - 9a4gl

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ax25/af_ax25.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index 01c83e2a4c19..28c71574a781 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -317,6 +317,9 @@ void ax25_destroy_socket(ax25_cb *ax25)
 				/* Queue the unaccepted socket for death */
 				sock_orphan(skb->sk);
 
+				/* 9A4GL: hack to release unaccepted sockets */
+				skb->sk->sk_state = TCP_LISTEN;
+
 				ax25_start_heartbeat(sax25);
 				sax25->state = AX25_STATE_0;
 			}
-- 
cgit v1.2.3


From 859f4c74d8de4dc344b3a115367d5e22a79bddaf Mon Sep 17 00:00:00 2001
From: Jarek Poplawski <jarkao2@gmail.com>
Date: Mon, 6 Oct 2008 12:54:57 -0700
Subject: netrom: Fix sock_orphan() use in nr_release

While debugging another bug it was found that NetRom socks
are sometimes seen unorphaned in sk_free(). This patch moves
sock_orphan() in nr_release() to the beginning (like in ax25,
or rose).

Reported-and-tested-by: Bernard Pidoux f6bvp <f6bvp@free.fr>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/netrom/af_netrom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c
index 532e4faa29f7..9f1ea4a27b35 100644
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -525,6 +525,7 @@ static int nr_release(struct socket *sock)
 	if (sk == NULL) return 0;
 
 	sock_hold(sk);
+	sock_orphan(sk);
 	lock_sock(sk);
 	nr = nr_sk(sk);
 
@@ -548,7 +549,6 @@ static int nr_release(struct socket *sock)
 		sk->sk_state    = TCP_CLOSE;
 		sk->sk_shutdown |= SEND_SHUTDOWN;
 		sk->sk_state_change(sk);
-		sock_orphan(sk);
 		sock_set_flag(sk, SOCK_DESTROY);
 		break;
 
-- 
cgit v1.2.3


From e683b423007b9befec30c672c695d0e6abf87493 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Mon, 6 Oct 2008 20:09:53 +0200
Subject: atmel-mci: Initialize BLKR before sending data transfer command

The atmel-mci driver sometimes fails data transfers like this:

   mmcblk0: error -5 transferring data
   end_request: I/O error, dev mmcblk0, sector 2749769
   end_request: I/O error, dev mmcblk0, sector 2749777

It turns out that this might be caused by the BLKR register (which
contains the block size and the number of blocks being transfered) being
initialized too late. This patch moves the initialization of BLKR so
that it contains the correct value before the block transfer command is
sent.

This error is difficult to reproduce, but if you insert a long delay
(mdelay(10) or thereabouts) between the calls to atmci_start_command()
and atmci_submit_data(), all transfers seem to fail without this patch,
while I haven't seen any failures with this patch.

Reported-by: Hein_Tibosch <hein_tibosch@yahoo.es>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mmc/host/atmel-mci.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 917035e16da4..00008967ef7a 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -426,8 +426,6 @@ static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data)
 	host->sg = NULL;
 	host->data = data;
 
-	mci_writel(host, BLKR, MCI_BCNT(data->blocks)
-			| MCI_BLKLEN(data->blksz));
 	dev_vdbg(&mmc->class_dev, "BLKR=0x%08x\n",
 			MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz));
 
@@ -483,6 +481,10 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 		if (data->blocks > 1 && data->blksz & 3)
 			goto fail;
 		atmci_set_timeout(host, data);
+
+		/* Must set block count/size before sending command */
+		mci_writel(host, BLKR, MCI_BCNT(data->blocks)
+				| MCI_BLKLEN(data->blksz));
 	}
 
 	iflags = MCI_CMDRDY;
-- 
cgit v1.2.3


From 87f3b6b6fbcbfa715f0d0db3e7a63e65716a6d4e Mon Sep 17 00:00:00 2001
From: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Date: Mon, 6 Oct 2008 09:30:12 -0400
Subject: Marker depmod fix core kernel list

* Theodore Ts'o (tytso@mit.edu) wrote:
>
> I've been playing with adding some markers into ext4 to see if they
> could be useful in solving some problems along with Systemtap.  It
> appears, though, that as of 2.6.27-rc8, markers defined in code which is
> compiled directly into the kernel (i.e., not as modules) don't show up
> in Module.markers:
>
> kvm_trace_entryexit arch/x86/kvm/kvm-intel  %u %p %u %u %u %u %u %u
> kvm_trace_handler arch/x86/kvm/kvm-intel  %u %p %u %u %u %u %u %u
> kvm_trace_entryexit arch/x86/kvm/kvm-amd  %u %p %u %u %u %u %u %u
> kvm_trace_handler arch/x86/kvm/kvm-amd  %u %p %u %u %u %u %u %u
>
> (Note the lack of any of the kernel_sched_* markers, and the markers I
> added for ext4_* and jbd2_* are missing as wel.)
>
> Systemtap apparently depends on in-kernel trace_mark being recorded in
> Module.markers, and apparently it's been claimed that it used to be
> there.  Is this a bug in systemtap, or in how Module.markers is getting
> built?   And is there a file that contains the equivalent information
> for markers located in non-modules code?

I think the problem comes from "markers: fix duplicate modpost entry"
(commit d35cb360c29956510b2fe1a953bd4968536f7216)

Especially :

  -   add_marker(mod, marker, fmt);
  +   if (!mod->skip)
  +     add_marker(mod, marker, fmt);
    }
    return;
   fail:

Here is a fix that should take care if this problem.

Thanks for the bug report!

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Tested-by: "Theodore Ts'o" <tytso@mit.edu>
CC: Greg KH <greg@kroah.com>
CC: David Smith <dsmith@redhat.com>
CC: Roland McGrath <roland@redhat.com>
CC: Sam Ravnborg <sam@ravnborg.org>
CC: Wenji Huang <wenji.huang@oracle.com>
CC: Takashi Nishiie <t-nishiie@np.css.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/mod/modpost.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 418cd7dbbc93..8e0de6a5e18a 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1986,11 +1986,13 @@ static void read_markers(const char *fname)
 
 		mod = find_module(modname);
 		if (!mod) {
-			if (is_vmlinux(modname))
-				have_vmlinux = 1;
 			mod = new_module(NOFAIL(strdup(modname)));
 			mod->skip = 1;
 		}
+		if (is_vmlinux(modname)) {
+			have_vmlinux = 1;
+			mod->skip = 0;
+		}
 
 		if (!mod->skip)
 			add_marker(mod, marker, fmt);
-- 
cgit v1.2.3


From 4330ed8ed4da360ac1ca14b0fddff4c05b10de16 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon, 6 Oct 2008 16:39:58 -0700
Subject: Linux 2.6.27-rc9

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index 1d03c1644ddb..ce9eceb2538e 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 27
-EXTRAVERSION = -rc8
+EXTRAVERSION = -rc9
 NAME = Rotary Wombat
 
 # *DOCUMENTATION*
-- 
cgit v1.2.3


From e09e6e2b6a5daf653794926ab50a784b14b6de53 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue, 7 Oct 2008 07:54:34 -0700
Subject: Revert "V4L/DVB (8904): cx88: add missing unlock_kernel"

This reverts commit 135aedc38e812b922aa56096f36a3d72ffbcf2fb, as
requested by Hans Verkuil.

It was a patch for 2.6.28 where the BKL was pushed down from v4l core to
the drivers, not for 2.6.27!

Requested-by: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/media/video/cx88/cx88-blackbird.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index 6b922066a660..9a1374a38ec7 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -1070,7 +1070,6 @@ static int mpeg_open(struct inode *inode, struct file *file)
 		err = drv->request_acquire(drv);
 		if(err != 0) {
 			dprintk(1,"%s: Unable to acquire hardware, %d\n", __func__, err);
-			unlock_kernel();
 			return err;
 		}
 	}
-- 
cgit v1.2.3


From 85ba94ba0592296053f7f2846812173424afe1cb Mon Sep 17 00:00:00 2001
From: Matt Mackall <mpm@selenic.com>
Date: Tue, 7 Oct 2008 11:37:35 -0500
Subject: SLOB: fix bogus ksize calculation

SLOB's ksize calculation was braindamaged and generally harmlessly
underreported the allocation size. But for very small buffers, it could
in fact overreport them, leading code depending on krealloc to overrun
the allocation and trample other data.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Tested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/slob.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/slob.c b/mm/slob.c
index 4c82dd41f32e..62b679dc660f 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -515,7 +515,7 @@ size_t ksize(const void *block)
 
 	sp = (struct slob_page *)virt_to_page(block);
 	if (slob_page(sp))
-		return ((slob_t *)block - 1)->units + SLOB_UNIT;
+		return (((slob_t *)block - 1)->units - 1) * SLOB_UNIT;
 	else
 		return sp->page.private;
 }
-- 
cgit v1.2.3


From b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 Mon Sep 17 00:00:00 2001
From: Patrick McHardy <kaber@trash.net>
Date: Tue, 7 Oct 2008 15:26:48 -0700
Subject: net: only invoke dev->change_rx_flags when device is UP

Jesper Dangaard Brouer <hawk@comx.dk> reported a bug when setting a VLAN
device down that is in promiscous mode:

When the VLAN device is set down, the promiscous count on the real
device is decremented by one by vlan_dev_stop(). When removing the
promiscous flag from the VLAN device afterwards, the promiscous
count on the real device is decremented a second time by the
vlan_change_rx_flags() callback.

The root cause for this is that the ->change_rx_flags() callback is
invoked while the device is down. The synchronization is meant to mirror
the behaviour of the ->set_rx_mode callbacks, meaning the ->open function
is responsible for doing a full sync on open, the ->close() function is
responsible for doing full cleanup on ->stop() and ->change_rx_flags()
is meant to do incremental changes while the device is UP.

Only invoke ->change_rx_flags() while the device is UP to provide the
intended behaviour.

Tested-by: Jesper Dangaard Brouer <jdb@comx.dk>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/dev.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index e8eb2b478344..fd992c0f2717 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2918,6 +2918,12 @@ int netdev_set_master(struct net_device *slave, struct net_device *master)
 	return 0;
 }
 
+static void dev_change_rx_flags(struct net_device *dev, int flags)
+{
+	if (dev->flags & IFF_UP && dev->change_rx_flags)
+		dev->change_rx_flags(dev, flags);
+}
+
 static int __dev_set_promiscuity(struct net_device *dev, int inc)
 {
 	unsigned short old_flags = dev->flags;
@@ -2955,8 +2961,7 @@ static int __dev_set_promiscuity(struct net_device *dev, int inc)
 				current->uid, current->gid,
 				audit_get_sessionid(current));
 
-		if (dev->change_rx_flags)
-			dev->change_rx_flags(dev, IFF_PROMISC);
+		dev_change_rx_flags(dev, IFF_PROMISC);
 	}
 	return 0;
 }
@@ -3022,8 +3027,7 @@ int dev_set_allmulti(struct net_device *dev, int inc)
 		}
 	}
 	if (dev->flags ^ old_flags) {
-		if (dev->change_rx_flags)
-			dev->change_rx_flags(dev, IFF_ALLMULTI);
+		dev_change_rx_flags(dev, IFF_ALLMULTI);
 		dev_set_rx_mode(dev);
 	}
 	return 0;
@@ -3347,8 +3351,8 @@ int dev_change_flags(struct net_device *dev, unsigned flags)
 	 *	Load in the correct multicast list now the flags have changed.
 	 */
 
-	if (dev->change_rx_flags && (old_flags ^ flags) & IFF_MULTICAST)
-		dev->change_rx_flags(dev, IFF_MULTICAST);
+	if ((old_flags ^ flags) & IFF_MULTICAST)
+		dev_change_rx_flags(dev, IFF_MULTICAST);
 
 	dev_set_rx_mode(dev);
 
-- 
cgit v1.2.3


From 53240c208776d557dba9d7afedbcdbf512774c16 Mon Sep 17 00:00:00 2001
From: Ali Saidi <saidi@engin.umich.edu>
Date: Tue, 7 Oct 2008 15:31:19 -0700
Subject: tcp: Fix possible double-ack w/ user dma

From: Ali Saidi <saidi@engin.umich.edu>

When TCP receive copy offload is enabled it's possible that
tcp_rcv_established() will cause two acks to be sent for a single
packet. In the case that a tcp_dma_early_copy() is successful,
copied_early is set to true which causes tcp_cleanup_rbuf() to be
called early which can send an ack. Further along in
tcp_rcv_established(), __tcp_ack_snd_check() is called and will
schedule a delayed ACK. If no packets are processed before the delayed
ack timer expires the packet will be acked twice.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/tcp_input.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 67ccce2a96bd..7abc6b80d47d 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -4879,7 +4879,8 @@ int tcp_rcv_established(struct sock *sk, struct sk_buff *skb,
 					goto no_ack;
 			}
 
-			__tcp_ack_snd_check(sk, 0);
+			if (!copied_early || tp->rcv_nxt != tp->rcv_wup)
+				__tcp_ack_snd_check(sk, 0);
 no_ack:
 #ifdef CONFIG_NET_DMA
 			if (copied_early)
-- 
cgit v1.2.3


From 58ec3b4db9eb5a28e3aec5f407a54e28f7039c19 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Tue, 7 Oct 2008 15:50:03 -0700
Subject: net: Fix netdev_run_todo dead-lock

Benjamin Thery tracked down a bug that explains many instances
of the error

unregister_netdevice: waiting for %s to become free. Usage count = %d

It turns out that netdev_run_todo can dead-lock with itself if
a second instance of it is run in a thread that will then free
a reference to the device waited on by the first instance.

The problem is really quite silly.  We were trying to create
parallelism where none was required.  As netdev_run_todo always
follows a RTNL section, and that todo tasks can only be added
with the RTNL held, by definition you should only need to wait
for the very ones that you've added and be done with it.

There is no need for a second mutex or spinlock.

This is exactly what the following patch does.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/dev.c       | 27 ++++++---------------------
 net/core/rtnetlink.c |  2 +-
 2 files changed, 7 insertions(+), 22 deletions(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index fd992c0f2717..0ae08d3f57e7 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3812,14 +3812,11 @@ static int dev_new_index(struct net *net)
 }
 
 /* Delayed registration/unregisteration */
-static DEFINE_SPINLOCK(net_todo_list_lock);
 static LIST_HEAD(net_todo_list);
 
 static void net_set_todo(struct net_device *dev)
 {
-	spin_lock(&net_todo_list_lock);
 	list_add_tail(&dev->todo_list, &net_todo_list);
-	spin_unlock(&net_todo_list_lock);
 }
 
 static void rollback_registered(struct net_device *dev)
@@ -4146,33 +4143,24 @@ static void netdev_wait_allrefs(struct net_device *dev)
  *	free_netdev(y1);
  *	free_netdev(y2);
  *
- * We are invoked by rtnl_unlock() after it drops the semaphore.
+ * We are invoked by rtnl_unlock().
  * This allows us to deal with problems:
  * 1) We can delete sysfs objects which invoke hotplug
  *    without deadlocking with linkwatch via keventd.
  * 2) Since we run with the RTNL semaphore not held, we can sleep
  *    safely in order to wait for the netdev refcnt to drop to zero.
+ *
+ * We must not return until all unregister events added during
+ * the interval the lock was held have been completed.
  */
-static DEFINE_MUTEX(net_todo_run_mutex);
 void netdev_run_todo(void)
 {
 	struct list_head list;
 
-	/* Need to guard against multiple cpu's getting out of order. */
-	mutex_lock(&net_todo_run_mutex);
-
-	/* Not safe to do outside the semaphore.  We must not return
-	 * until all unregister events invoked by the local processor
-	 * have been completed (either by this todo run, or one on
-	 * another cpu).
-	 */
-	if (list_empty(&net_todo_list))
-		goto out;
-
 	/* Snapshot list, allow later requests */
-	spin_lock(&net_todo_list_lock);
 	list_replace_init(&net_todo_list, &list);
-	spin_unlock(&net_todo_list_lock);
+
+	__rtnl_unlock();
 
 	while (!list_empty(&list)) {
 		struct net_device *dev
@@ -4204,9 +4192,6 @@ void netdev_run_todo(void)
 		/* Free network device */
 		kobject_put(&dev->dev.kobj);
 	}
-
-out:
-	mutex_unlock(&net_todo_run_mutex);
 }
 
 static struct net_device_stats *internal_stats(struct net_device *dev)
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 71edb8b36341..d6381c2a4693 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -73,7 +73,7 @@ void __rtnl_unlock(void)
 
 void rtnl_unlock(void)
 {
-	mutex_unlock(&rtnl_mutex);
+	/* This fellow will unlock it for us. */
 	netdev_run_todo();
 }
 
-- 
cgit v1.2.3


From 9d2c27e17b7574023b5adb5c6a50d7aaeb915543 Mon Sep 17 00:00:00 2001
From: Daniele Lacamera <root@danielinux.net>
Date: Tue, 7 Oct 2008 15:58:17 -0700
Subject: tcp: Fix tcp_hybla zero congestion window growth with small rho and
 large cwnd.

Because of rounding, in certain conditions, i.e. when in congestion
avoidance state rho is smaller than 1/128 of the current cwnd, TCP
Hybla congestion control starves and the cwnd is kept constant
forever.

This patch forces an increment by one segment after #send_cwnd calls
without increments(newreno behavior).

Signed-off-by: Daniele Lacamera <root@danielinux.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/tcp_hybla.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_hybla.c b/net/ipv4/tcp_hybla.c
index bfcbd148a89d..c209e054a634 100644
--- a/net/ipv4/tcp_hybla.c
+++ b/net/ipv4/tcp_hybla.c
@@ -150,7 +150,11 @@ static void hybla_cong_avoid(struct sock *sk, u32 ack, u32 in_flight)
 		ca->snd_cwnd_cents -= 128;
 		tp->snd_cwnd_cnt = 0;
 	}
-
+	/* check when cwnd has not been incremented for a while */
+	if (increment == 0 && odd == 0 && tp->snd_cwnd_cnt >= tp->snd_cwnd) {
+		tp->snd_cwnd++;
+		tp->snd_cwnd_cnt = 0;
+	}
 	/* clamp down slowstart cwnd to ssthresh value. */
 	if (is_slowstart)
 		tp->snd_cwnd = min(tp->snd_cwnd, tp->snd_ssthresh);
-- 
cgit v1.2.3


From 8806048878fce541afe1d72cd2320f092519f90a Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Wed, 8 Oct 2008 19:14:33 +0100
Subject: [MIPS] Sibyte: Register PIO PATA device only for Swarm and Litte Sur

Symbol name spaghetti which is too complicated to cleanup on this stage
of the release cycle breaks the build on BCM1480 platforms.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/sibyte/swarm/platform.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/mips/sibyte/swarm/platform.c b/arch/mips/sibyte/swarm/platform.c
index dd0e5b9b64e8..54847fe1e564 100644
--- a/arch/mips/sibyte/swarm/platform.c
+++ b/arch/mips/sibyte/swarm/platform.c
@@ -9,6 +9,8 @@
 #include <asm/sibyte/sb1250_genbus.h>
 #include <asm/sibyte/sb1250_regs.h>
 
+#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_LITTLESUR)
+
 #define DRV_NAME	"pata-swarm"
 
 #define SWARM_IDE_SHIFT	5
@@ -79,3 +81,5 @@ static int __init swarm_pata_init(void)
 }
 
 device_initcall(swarm_pata_init);
+
+#endif /* defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_LITTLESUR) */
-- 
cgit v1.2.3


From 04dcd84bc79d9f756bf5b9fc16c7df3344823ca8 Mon Sep 17 00:00:00 2001
From: Corentin Chary <corentincj@iksaif.net>
Date: Thu, 9 Oct 2008 15:33:57 +0200
Subject: eeepc-laptop: Fix hwmon interface

Creates a name file in the sysfs directory, that
is needed for the libsensors library to work.
Also rename fan1_pwm to pwm1 and scale its value as needed.

This fixes bug #11520:
http://bugzilla.kernel.org/show_bug.cgi?id=11520

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/misc/eeepc-laptop.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/misc/eeepc-laptop.c b/drivers/misc/eeepc-laptop.c
index facdb9893c84..1ee8501e90f1 100644
--- a/drivers/misc/eeepc-laptop.c
+++ b/drivers/misc/eeepc-laptop.c
@@ -450,12 +450,14 @@ static int eeepc_get_fan_pwm(void)
 	int value = 0;
 
 	read_acpi_int(NULL, EEEPC_EC_FAN_PWM, &value);
+	value = value * 255 / 100;
 	return (value);
 }
 
 static void eeepc_set_fan_pwm(int value)
 {
-	value = SENSORS_LIMIT(value, 0, 100);
+	value = SENSORS_LIMIT(value, 0, 255);
+	value = value * 100 / 255;
 	ec_write(EEEPC_EC_SC02, value);
 }
 
@@ -520,15 +522,23 @@ static ssize_t show_sys_hwmon(int (*get)(void), char *buf)
 	static SENSOR_DEVICE_ATTR(_name, _mode, show_##_name, store_##_name, 0);
 
 EEEPC_CREATE_SENSOR_ATTR(fan1_input, S_IRUGO, eeepc_get_fan_rpm, NULL);
-EEEPC_CREATE_SENSOR_ATTR(fan1_pwm, S_IRUGO | S_IWUSR,
+EEEPC_CREATE_SENSOR_ATTR(pwm1, S_IRUGO | S_IWUSR,
 			 eeepc_get_fan_pwm, eeepc_set_fan_pwm);
 EEEPC_CREATE_SENSOR_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
 			 eeepc_get_fan_ctrl, eeepc_set_fan_ctrl);
 
+static ssize_t
+show_name(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "eeepc\n");
+}
+static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0);
+
 static struct attribute *hwmon_attributes[] = {
-	&sensor_dev_attr_fan1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1.dev_attr.attr,
 	&sensor_dev_attr_fan1_input.dev_attr.attr,
 	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_name.dev_attr.attr,
 	NULL
 };
 
-- 
cgit v1.2.3


From 98dd22c3e086d76058083432d4d8fb85f04bab90 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Thu, 9 Oct 2008 15:33:58 +0200
Subject: hwmon: (it87) Prevent power-off on Shuttle SN68PT

On the Shuttle SN68PT, FAN_CTL2 is apparently not connected to a fan,
but to something else. One user has reported instant system power-off
when changing the PWM2 duty cycle, so we disable it.

I use the board name string as the trigger in case the same board is
ever used in other systems.

This closes lm-sensors ticket #2349:
pwmconfig causes a hard poweroff
http://www.lm-sensors.org/ticket/2349

Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/it87.c | 70 ++++++++++++++++++++++++++++++++++++++--------------
 1 file changed, 51 insertions(+), 19 deletions(-)

diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index f1133081cc42..d793cc011990 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -46,6 +46,8 @@
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/sysfs.h>
+#include <linux/string.h>
+#include <linux/dmi.h>
 #include <asm/io.h>
 
 #define DRVNAME "it87"
@@ -236,6 +238,8 @@ struct it87_sio_data {
 	/* Values read from Super-I/O config space */
 	u8 revision;
 	u8 vid_value;
+	/* Values set based on DMI strings */
+	u8 skip_pwm;
 };
 
 /* For each registered chip, we need to keep some data in memory.
@@ -964,6 +968,7 @@ static int __init it87_find(unsigned short *address,
 {
 	int err = -ENODEV;
 	u16 chip_type;
+	const char *board_vendor, *board_name;
 
 	superio_enter();
 	chip_type = force_id ? force_id : superio_inw(DEVID);
@@ -1022,6 +1027,24 @@ static int __init it87_find(unsigned short *address,
 			pr_info("it87: in7 is VCCH (+5V Stand-By)\n");
 	}
 
+	/* Disable specific features based on DMI strings */
+	board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+	board_name = dmi_get_system_info(DMI_BOARD_NAME);
+	if (board_vendor && board_name) {
+		if (strcmp(board_vendor, "nVIDIA") == 0
+		 && strcmp(board_name, "FN68PT") == 0) {
+			/* On the Shuttle SN68PT, FAN_CTL2 is apparently not
+			   connected to a fan, but to something else. One user
+			   has reported instant system power-off when changing
+			   the PWM2 duty cycle, so we disable it.
+			   I use the board name string as the trigger in case
+			   the same board is ever used in other systems. */
+			pr_info("it87: Disabling pwm2 due to "
+				"hardware constraints\n");
+			sio_data->skip_pwm = (1 << 1);
+		}
+	}
+
 exit:
 	superio_exit();
 	return err;
@@ -1168,25 +1191,33 @@ static int __devinit it87_probe(struct platform_device *pdev)
 	}
 
 	if (enable_pwm_interface) {
-		if ((err = device_create_file(dev,
-		     &sensor_dev_attr_pwm1_enable.dev_attr))
-		 || (err = device_create_file(dev,
-		     &sensor_dev_attr_pwm2_enable.dev_attr))
-		 || (err = device_create_file(dev,
-		     &sensor_dev_attr_pwm3_enable.dev_attr))
-		 || (err = device_create_file(dev,
-		     &sensor_dev_attr_pwm1.dev_attr))
-		 || (err = device_create_file(dev,
-		     &sensor_dev_attr_pwm2.dev_attr))
-		 || (err = device_create_file(dev,
-		     &sensor_dev_attr_pwm3.dev_attr))
-		 || (err = device_create_file(dev,
-		     &dev_attr_pwm1_freq))
-		 || (err = device_create_file(dev,
-		     &dev_attr_pwm2_freq))
-		 || (err = device_create_file(dev,
-		     &dev_attr_pwm3_freq)))
-			goto ERROR4;
+		if (!(sio_data->skip_pwm & (1 << 0))) {
+			if ((err = device_create_file(dev,
+			     &sensor_dev_attr_pwm1_enable.dev_attr))
+			 || (err = device_create_file(dev,
+			     &sensor_dev_attr_pwm1.dev_attr))
+			 || (err = device_create_file(dev,
+			     &dev_attr_pwm1_freq)))
+				goto ERROR4;
+		}
+		if (!(sio_data->skip_pwm & (1 << 1))) {
+			if ((err = device_create_file(dev,
+			     &sensor_dev_attr_pwm2_enable.dev_attr))
+			 || (err = device_create_file(dev,
+			     &sensor_dev_attr_pwm2.dev_attr))
+			 || (err = device_create_file(dev,
+			     &dev_attr_pwm2_freq)))
+				goto ERROR4;
+		}
+		if (!(sio_data->skip_pwm & (1 << 2))) {
+			if ((err = device_create_file(dev,
+			     &sensor_dev_attr_pwm3_enable.dev_attr))
+			 || (err = device_create_file(dev,
+			     &sensor_dev_attr_pwm3.dev_attr))
+			 || (err = device_create_file(dev,
+			     &dev_attr_pwm3_freq)))
+				goto ERROR4;
+		}
 	}
 
 	if (data->type == it8712 || data->type == it8716
@@ -1546,6 +1577,7 @@ static int __init sm_it87_init(void)
 	unsigned short isa_address=0;
 	struct it87_sio_data sio_data;
 
+	memset(&sio_data, 0, sizeof(struct it87_sio_data));
 	err = it87_find(&isa_address, &sio_data);
 	if (err)
 		return err;
-- 
cgit v1.2.3


From ddedc658fc56bb5b9b200d7f4df6e93e1d0d8048 Mon Sep 17 00:00:00 2001
From: "Darrick J. Wong" <djwong@us.ibm.com>
Date: Thu, 9 Oct 2008 15:33:58 +0200
Subject: hwmon: Define sysfs interface for energy consumption register

Describe the sysfs files that were introduced in the ibmaem driver.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 Documentation/hwmon/sysfs-interface | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 2d845730d4e0..6dbfd5efd991 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -329,6 +329,10 @@ power[1-*]_average		Average power use
 				Unit: microWatt
 				RO
 
+power[1-*]_average_interval	Power use averaging interval
+				Unit: milliseconds
+				RW
+
 power[1-*]_average_highest	Historical average maximum power use
 				Unit: microWatt
 				RO
@@ -353,6 +357,14 @@ power[1-*]_reset_history	Reset input_highest, input_lowest,
 				average_highest and average_lowest.
 				WO
 
+**********
+* Energy *
+**********
+
+energy[1-*]_input		Cumulative energy use
+				Unit: microJoule
+				RO
+
 **********
 * Alarms *
 **********
-- 
cgit v1.2.3


From c73c556c1ae3619d8a7c55254b0ddcf10034a914 Mon Sep 17 00:00:00 2001
From: "Darrick J. Wong" <djwong@us.ibm.com>
Date: Thu, 9 Oct 2008 15:33:58 +0200
Subject: hwmon: (adt7473) Fix some bogosity in documentation file

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 Documentation/hwmon/adt7473 | 18 +++++-------------
 1 file changed, 5 insertions(+), 13 deletions(-)

diff --git a/Documentation/hwmon/adt7473 b/Documentation/hwmon/adt7473
index 2126de34c711..1cbf671822e2 100644
--- a/Documentation/hwmon/adt7473
+++ b/Documentation/hwmon/adt7473
@@ -14,14 +14,14 @@ Description
 
 This driver implements support for the Analog Devices ADT7473 chip family.
 
-The LM85 uses the 2-wire interface compatible with the SMBUS 2.0
+The ADT7473 uses the 2-wire interface compatible with the SMBUS 2.0
 specification. Using an analog to digital converter it measures three (3)
-temperatures and two (2) voltages. It has three (3) 16-bit counters for
+temperatures and two (2) voltages. It has four (4) 16-bit counters for
 measuring fan speed. There are three (3) PWM outputs that can be used
 to control fan speed.
 
 A sophisticated control system for the PWM outputs is designed into the
-LM85 that allows fan speed to be adjusted automatically based on any of the
+ADT7473 that allows fan speed to be adjusted automatically based on any of the
 three temperature sensors. Each PWM output is individually adjustable and
 programmable. Once configured, the ADT7473 will adjust the PWM outputs in
 response to the measured temperatures without further host intervention.
@@ -46,14 +46,6 @@ from the raw value to get the temperature value.
 The Analog Devices datasheet is very detailed and describes a procedure for
 determining an optimal configuration for the automatic PWM control.
 
-Hardware Configurations
------------------------
-
-The ADT7473 chips have an optional SMBALERT output that can be used to
-signal the chipset in case a limit is exceeded or the temperature sensors
-fail. Individual sensor interrupts can be masked so they won't trigger
-SMBALERT. The SMBALERT output if configured replaces the PWM2 function.
-
 Configuration Notes
 -------------------
 
@@ -61,8 +53,8 @@ Besides standard interfaces driver adds the following:
 
 * PWM Control
 
-* pwm#_auto_point1_pwm and pwm#_auto_point1_temp and
-* pwm#_auto_point2_pwm and pwm#_auto_point2_temp -
+* pwm#_auto_point1_pwm and temp#_auto_point1_temp and
+* pwm#_auto_point2_pwm and temp#_auto_point2_temp -
 
 point1: Set the pwm speed at a lower temperature bound.
 point2: Set the pwm speed at a higher temperature bound.
-- 
cgit v1.2.3


From 8748a71e8c2d1310b66c2feed1632de8620cd2f1 Mon Sep 17 00:00:00 2001
From: Alistair John Strachan <alistair@devzero.co.uk>
Date: Thu, 9 Oct 2008 15:33:59 +0200
Subject: hwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32X

The table for the Abit AT8 32X was incorrectly missing an entry
for the sixth ("AUX3") fan. Add this entry, exporting the fan
reading to userspace.

Closes lm-sensors.org ticket #2339.

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Tested-by: Daniel Exner <dex@dragonslave.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/abituguru3.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index d568c65c1370..4545194a0044 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -303,6 +303,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "SYS Fan",		34, 2, 60, 1, 0 },
 		{ "AUX1 Fan",		35, 2, 60, 1, 0 },
 		{ "AUX2 Fan",		36, 2, 60, 1, 0 },
+		{ "AUX3 Fan",		37, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
 	{ 0x0012, NULL /* Abit AN8 32X, need DMI string */, {
-- 
cgit v1.2.3


From 5e5cddbc3f2936c9fefbae64633c522e242c350d Mon Sep 17 00:00:00 2001
From: Alistair John Strachan <alistair@devzero.co.uk>
Date: Thu, 9 Oct 2008 15:33:59 +0200
Subject: hwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32X

Enable driver checking of the DMI product name (when enabled) on
an Abit AT8 32X, instead of falling back to a manual probe. This
eliminates false negatives and eventually will help avoid
unnecessary bus probes on unsupported mainboards.

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Tested-by: Daniel Exner <dex@dragonslave.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/abituguru3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index 4545194a0044..d9e7a49d6cbf 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -279,7 +279,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "OTES1 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0011, NULL /* Abit AT8 32X, need DMI string */, {
+	{ 0x0011, "AT8 32X(ATI RD580-ULI M1575)", {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 20, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
-- 
cgit v1.2.3


From 8d5922572038bae9f7b16fcb974eee806727b44c Mon Sep 17 00:00:00 2001
From: Németh Márton <nm127@freemail.hu>
Date: Thu, 9 Oct 2008 14:59:17 +0200
Subject: [CPUFREQ] correct broken links and email addresses
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Replace the no longer working links and email address in the
documentation and in source code.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Dave Jones <davej@redhat.com>
---
 Documentation/cpu-freq/index.txt                 | 10 ++++------
 arch/x86/kernel/cpu/cpufreq/p4-clockmod.c        |  2 +-
 arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c |  2 +-
 3 files changed, 6 insertions(+), 8 deletions(-)

diff --git a/Documentation/cpu-freq/index.txt b/Documentation/cpu-freq/index.txt
index ffdb5323df37..3d0b915035b9 100644
--- a/Documentation/cpu-freq/index.txt
+++ b/Documentation/cpu-freq/index.txt
@@ -35,11 +35,9 @@ Mailing List
 ------------
 There is a CPU frequency changing CVS commit and general list where
 you can report bugs, problems or submit patches. To post a message,
-send an email to cpufreq@lists.linux.org.uk, to subscribe go to
-http://lists.linux.org.uk/mailman/listinfo/cpufreq. Previous post to the
-mailing list are available to subscribers at
-http://lists.linux.org.uk/mailman/private/cpufreq/.
-
+send an email to cpufreq@vger.kernel.org, to subscribe go to
+http://vger.kernel.org/vger-lists.html#cpufreq and follow the
+instructions there.
 
 Links
 -----
@@ -50,7 +48,7 @@ how to access the CVS repository:
 * http://cvs.arm.linux.org.uk/
 
 the CPUFreq Mailing list:
-* http://lists.linux.org.uk/mailman/listinfo/cpufreq
+* http://vger.kernel.org/vger-lists.html#cpufreq
 
 Clock and voltage scaling for the SA-1100:
 * http://www.lartmaker.nl/projects/scaling
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index f1685fb91fbd..b8e05ee4f736 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
@@ -171,7 +171,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
 	}
 
 	if (c->x86 != 0xF) {
-		printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@lists.linux.org.uk>\n");
+		printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@vger.kernel.org>\n");
 		return 0;
 	}
 
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
index 15e13c01cc36..3b5f06423e77 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -26,7 +26,7 @@
 #include <asm/cpufeature.h>
 
 #define PFX		"speedstep-centrino: "
-#define MAINTAINER	"cpufreq@lists.linux.org.uk"
+#define MAINTAINER	"cpufreq@vger.kernel.org"
 
 #define dprintk(msg...) \
 	cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
-- 
cgit v1.2.3


From 70096a561d1e09120bae1f293f3632cedbfd5c68 Mon Sep 17 00:00:00 2001
From: Matt Mackall <mpm@selenic.com>
Date: Wed, 8 Oct 2008 14:51:57 -0500
Subject: SLOB: fix bogus ksize calculation fix

This fixes the previous fix, which was completely wrong on closer
inspection. This version has been manually tested with a user-space
test harness and generates sane values. A nearly identical patch has
been boot-tested.

The problem arose from changing how kmalloc/kfree handled alignment
padding without updating ksize to match. This brings it in sync.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/slob.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/mm/slob.c b/mm/slob.c
index 62b679dc660f..cb675d126791 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -514,9 +514,11 @@ size_t ksize(const void *block)
 		return 0;
 
 	sp = (struct slob_page *)virt_to_page(block);
-	if (slob_page(sp))
-		return (((slob_t *)block - 1)->units - 1) * SLOB_UNIT;
-	else
+	if (slob_page(sp)) {
+		int align = max(ARCH_KMALLOC_MINALIGN, ARCH_SLAB_MINALIGN);
+		unsigned int *m = (unsigned int *)(block - align);
+		return SLOB_UNITS(*m) * SLOB_UNIT;
+	} else
 		return sp->page.private;
 }
 
-- 
cgit v1.2.3


From efc968d450e013049a662d22727cf132618dcb2f Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Thu, 9 Oct 2008 14:04:54 -0700
Subject: Don't allow splice() to files opened with O_APPEND

This is debatable, but while we're debating it, let's disallow the
combination of splice and an O_APPEND destination.

It's not entirely clear what the semantics of O_APPEND should be, and
POSIX apparently expects pwrite() to ignore O_APPEND, for example.  So
we could make up any semantics we want, including the old ones.

But Miklos convinced me that we should at least give it some thought,
and that accepting writes at arbitrary offsets is wrong at least for
IS_APPEND() files (which always have O_APPEND set, even if the reverse
isn't true: you can obviously have O_APPEND set on a regular file).

So disallow O_APPEND entirely for now.  I doubt anybody cares, and this
way we have one less gray area to worry about.

Reported-and-argued-for-by: Miklos Szeredi <miklos@szeredi.hu>
Acked-by: Jens Axboe <ens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/splice.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/splice.c b/fs/splice.c
index 1bbc6f4bb09c..a1e701c27156 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -898,6 +898,9 @@ static long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
 	if (unlikely(!(out->f_mode & FMODE_WRITE)))
 		return -EBADF;
 
+	if (unlikely(out->f_flags & O_APPEND))
+		return -EINVAL;
+
 	ret = rw_verify_area(WRITE, out, ppos, len);
 	if (unlikely(ret < 0))
 		return ret;
-- 
cgit v1.2.3


From 3fa8749e584b55f1180411ab1b51117190bac1e5 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Thu, 9 Oct 2008 15:13:53 -0700
Subject: Linux 2.6.27

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index ce9eceb2538e..16e3fbb968a8 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 27
-EXTRAVERSION = -rc9
+EXTRAVERSION =
 NAME = Rotary Wombat
 
 # *DOCUMENTATION*
-- 
cgit v1.2.3