From 7e381ec6a36aa44f15fc1a76e6efb9e2cd942e61 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 25 Sep 2015 16:02:03 +0300 Subject: ARM: dts: am57xx-beagle-x15: set VDD_SD to always-on LDO1 regulator (VDD_SD) is connected to SoC's vddshv8. vddshv8 needs to be kept always powered (see commit 5a0f93c6576a ("ARM: dts: Add am57xx-beagle-x15"), but at the moment VDD_SD is enabled/disabled depending on whether an SD card is inserted or not. This patch sets LDO1 regulator to always-on. This patch has a side effect of fixing another issue, HDMI DDC not working when SD card is not inserted: Why this happens is that the tpd12s015 (HDMI level shifter/ESD protection chip) has LS_OE GPIO input, which needs to be enabled for the HDMI DDC to work. LS_OE comes from gpio6_28. The pin that provides gpio6_28 is powered by vddshv8, and vddshv8 comes from VDD_SD. So when SD card is not inserted, VDD_SD is disabled, and LS_OE stays off. The proper fix for the HDMI DDC issue would be to maybe have the pinctrl framework manage the pin specific power. Apparently this fixes also a third issue (copy paste from Kishon's patch): ldo1_reg in addition to being connected to the io lines is also connected to the card detect line. On card removal, omap_hsmmc driver does a regulator_disable causing card detect line to be pulled down. This raises a card insertion interrupt and once the MMC core detects there is no card inserted, it does a regulator disable which again raises a card insertion interrupt. This happens in a loop causing infinite MMC interrupts. Fixes: 5a0f93c6576a ("ARM: dts: Add am57xx-beagle-x15") Cc: Kishon Vijay Abraham I Signed-off-by: Tomi Valkeinen Reported-by: Louis McCarthy Acked-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-beagle-x15.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 568adf5efde0..d55e3ea89fda 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -402,11 +402,12 @@ /* SMPS9 unused */ ldo1_reg: ldo1 { - /* VDD_SD */ + /* VDD_SD / VDDSHV8 */ regulator-name = "ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; + regulator-always-on; }; ldo2_reg: ldo2 { -- cgit v1.2.3 From be59b6192f43a9792f5f636b51358196ba11bbf6 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 12 Oct 2015 16:19:54 -0700 Subject: memory: omap-gpmc: Fix unselectable debug option for GPMC MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 63aa945b1013 ("memory: omap-gpmc: Add Kconfig option for debug") added a debug option for GPMC, but somehow managed to keep it unselectable. This probably happened because I had some uncommitted changes and the GPMC option is selected in the platform specific Kconfig. Let's also update the description a bit, it does not mention that enabling the debug option also disables the reset of GPMC controller during the init as pointed out by Uwe Kleine-König and Roger Quadros . Fixes: 63aa945b1013 ("memory: omap-gpmc: Add Kconfig option for debug") Reported-by: Uwe Kleine-König Acked-by: Roger Quadros Signed-off-by: Tony Lindgren --- drivers/memory/Kconfig | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig index c6a644b22af4..6f3154613dc7 100644 --- a/drivers/memory/Kconfig +++ b/drivers/memory/Kconfig @@ -58,12 +58,18 @@ config OMAP_GPMC memory drives like NOR, NAND, OneNAND, SRAM. config OMAP_GPMC_DEBUG - bool + bool "Enable GPMC debug output and skip reset of GPMC during init" depends on OMAP_GPMC help Enables verbose debugging mostly to decode the bootloader provided - timings. Enable this during development to configure devices - connected to the GPMC bus. + timings. To preserve the bootloader provided timings, the reset + of GPMC is skipped during init. Enable this during development to + configure devices connected to the GPMC bus. + + NOTE: In addition to matching the register setup with the bootloader + you also need to match the GPMC FCLK frequency used by the + bootloader or else the GPMC timings won't be identical with the + bootloader timings. config MVEBU_DEVBUS bool "Marvell EBU Device Bus Controller" -- cgit v1.2.3 From fd820a1ec758bc25b0eb10ab5e88e6c61fbcc8aa Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Tue, 6 Oct 2015 22:07:49 +0200 Subject: memory: omap-gpmc: dump "before" state before first modification MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When gpmc_cs_show_timings is called in gpmc_cs_set_timings() gpmc_cs_program_settings() was already run which modifies the CONFIG1 register. So to be more useful do the "before" dump earlier. Signed-off-by: Uwe Kleine-König Acked-by: Roger Quadros Signed-off-by: Tony Lindgren --- drivers/memory/omap-gpmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c index 32ac049f2bc4..6515dfc2b805 100644 --- a/drivers/memory/omap-gpmc.c +++ b/drivers/memory/omap-gpmc.c @@ -696,7 +696,6 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t, int div; u32 l; - gpmc_cs_show_timings(cs, "before gpmc_cs_set_timings"); div = gpmc_calc_divider(t->sync_clk); if (div < 0) return div; @@ -1988,6 +1987,7 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, if (ret < 0) goto err; + gpmc_cs_show_timings(cs, "before gpmc_cs_program_settings"); ret = gpmc_cs_program_settings(cs, &gpmc_s); if (ret < 0) goto err; -- cgit v1.2.3 From d8e1f5ed11a39a68da00f05000466c4f6db4456e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 12 Oct 2015 16:19:54 -0700 Subject: Documentation: ARM: List new omap MMC requirements Earlier the PBIAS regulator was optional, not so with recent omap_hsmmc changes. To make things easier for people with custom .config files, let's add minimal documentation for it as suggested by Russell King . Signed-off-by: Tony Lindgren --- Documentation/arm/OMAP/README | 7 +++++++ 1 file changed, 7 insertions(+) create mode 100644 Documentation/arm/OMAP/README diff --git a/Documentation/arm/OMAP/README b/Documentation/arm/OMAP/README new file mode 100644 index 000000000000..75645c45d14a --- /dev/null +++ b/Documentation/arm/OMAP/README @@ -0,0 +1,7 @@ +This file contains documentation for running mainline +kernel on omaps. + +KERNEL NEW DEPENDENCIES +v4.3+ Update is needed for custom .config files to make sure + CONFIG_REGULATOR_PBIAS is enabled for MMC1 to work + properly. -- cgit v1.2.3