From 673e7bbdb3920b62cfc6c710bea626b0a9b0f43a Mon Sep 17 00:00:00 2001 From: "U. Artie Eoff" Date: Mon, 29 Sep 2014 15:49:32 -0700 Subject: drm/i915: intel_backlight scale() math WA Improper truncated integer division in the scale() function causes actual_brightness != brightness. This (partial) work-around should be sufficient for a majority of use-cases, but it is by no means a complete solution. TODO: Determine how best to scale "user" values to "hw" values, and vice-versa, when the ranges are of different sizes. That would be a buggy scenario even with this work-around. The issue was introduced in the following (v3.17-rc1) commit: 6dda730 drm/i915: respect the VBT minimum backlight brightness Note that for easier backporting this commit adds a duplicated macro. A follow-up cleanup patch rectifies this for 3.18+ v2: (thanks to Chris Wilson) clarify commit message, use rounded division macro v3: -DIV_ROUND_CLOSEST() fails to build with CONFIG_X86_32=y. (Jani) -Use DIV_ROUND_CLOSEST_ULL() instead. (Damien) -v1 and v2 originally authored by Joe Konno. Signed-off-by: U. Artie Eoff Cc: stable@vger.kernel.org Reviewed-By: Joe Konno [danvet: Add backporting note.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_panel.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 18784470a760..97ff71f40dd3 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -398,6 +398,9 @@ intel_panel_detect(struct drm_device *dev) } } +#define DIV_ROUND_CLOSEST_ULL(ll, d) \ +({ unsigned long long _tmp = (ll)+(d)/2; do_div(_tmp, d); _tmp; }) + /** * scale - scale values from one range to another * @@ -419,9 +422,8 @@ static uint32_t scale(uint32_t source_val, source_val = clamp(source_val, source_min, source_max); /* avoid overflows */ - target_val = (uint64_t)(source_val - source_min) * - (target_max - target_min); - do_div(target_val, source_max - source_min); + target_val = DIV_ROUND_CLOSEST_ULL((uint64_t)(source_val - source_min) * + (target_max - target_min), source_max - source_min); target_val += target_min; return target_val; -- cgit v1.2.3 From 2e5416252af5239ddcd92bc858a494c1ca842778 Mon Sep 17 00:00:00 2001 From: "U. Artie Eoff" Date: Mon, 29 Sep 2014 15:49:33 -0700 Subject: drm/i915: Move DIV_ROUND_CLOSEST_ULL macro to header Move the duplicated DIV_ROUND_CLOSEST_ULL macro into the intel_drv.h header file so that it can be shared between intel_display.c and intel_panel.c. Signed-off-by: U. Artie Eoff Reviewed-By: Joe Konno Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 3 --- drivers/gpu/drm/i915/intel_drv.h | 3 +++ drivers/gpu/drm/i915/intel_panel.c | 3 --- 3 files changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 507370513f3d..6a0cc367934d 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -73,9 +73,6 @@ static const uint32_t intel_cursor_formats[] = { DRM_FORMAT_ARGB8888, }; -#define DIV_ROUND_CLOSEST_ULL(ll, d) \ -({ unsigned long long _tmp = (ll)+(d)/2; do_div(_tmp, d); _tmp; }) - static void intel_increase_pllclock(struct drm_device *dev, enum pipe pipe); static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 07ce04683c30..ba715229a540 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -35,6 +35,9 @@ #include #include +#define DIV_ROUND_CLOSEST_ULL(ll, d) \ +({ unsigned long long _tmp = (ll)+(d)/2; do_div(_tmp, d); _tmp; }) + /** * _wait_for - magic (register) wait macro * diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 97ff71f40dd3..0e018cb49147 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -398,9 +398,6 @@ intel_panel_detect(struct drm_device *dev) } } -#define DIV_ROUND_CLOSEST_ULL(ll, d) \ -({ unsigned long long _tmp = (ll)+(d)/2; do_div(_tmp, d); _tmp; }) - /** * scale - scale values from one range to another * -- cgit v1.2.3 From 1180e20606fd7c5d76dc5b2a1594fa51ba5a0f31 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 7 Oct 2014 18:02:52 -0300 Subject: drm/i915: properly reenable gen8 pipe IRQs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We were missing the pipe B/C vblank bits! Take a look at gen8_de_irq_postinstall for a comparison. This should fix a bunch of IGT tests. There are a few more things we could improve on this code, but this should be the minimal fix to unblock us. v2: s/extra_iir/extra_ier/ because IIR doesn't make sense (Ville) Bugzilla:https://bugs.freedesktop.org/show_bug.cgi?id=83640 Testcase: igt/* Cc: stable@vger.kernel.org Signed-off-by: Paulo Zanoni Reviewed-by: Ville Syrjälä Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_irq.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 3201986bf25e..54bf54706d1d 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -3458,12 +3458,13 @@ static void gen8_irq_reset(struct drm_device *dev) void gen8_irq_power_well_post_enable(struct drm_i915_private *dev_priv) { unsigned long irqflags; + uint32_t extra_ier = GEN8_PIPE_VBLANK | GEN8_PIPE_FIFO_UNDERRUN; spin_lock_irqsave(&dev_priv->irq_lock, irqflags); GEN8_IRQ_INIT_NDX(DE_PIPE, PIPE_B, dev_priv->de_irq_mask[PIPE_B], - ~dev_priv->de_irq_mask[PIPE_B]); + ~dev_priv->de_irq_mask[PIPE_B] | extra_ier); GEN8_IRQ_INIT_NDX(DE_PIPE, PIPE_C, dev_priv->de_irq_mask[PIPE_C], - ~dev_priv->de_irq_mask[PIPE_C]); + ~dev_priv->de_irq_mask[PIPE_C] | extra_ier); spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); } -- cgit v1.2.3 From e17ac6db2ef99388b750b2141c11974dc5742913 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Thu, 9 Oct 2014 19:37:15 +0300 Subject: drm/i915: Don't trust the DP_DETECT bit for eDP ports on CHV MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On CHV the display DDC pins may be muxed to an alternate function if there's no need for DDC on a specific port, which is the case for eDP ports since there's no way to plug in a DP++ HDMI dongle. This causes problems when trying to determine if the port is present since the the DP_DETECTED bit is the latched state of the DDC SDA pin at boot. If the DDC pins are muxed to an alternate function the bit may indicate that the port isn't present. To work around this look at the VBT as well as the DP_DETECTED bit to determine if we should attempt registering an eDP port. Do this only for ports B and C since port D doesn't support eDP (no PPS/BLC). In theory someone could also wire up a normal DP port w/o DDC lines. That would just mean that simple DP++ HDMI dongles wouldn't work on such a port. With this change we would still fail to register such DP ports. But let's hope no one wires their board in such a way, and if they do we can extend the VBT checks to cover normal DP ports as well. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84265 Signed-off-by: Ville Syrjälä Reviewed-by: Damien Lespiau Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 33 +++++++++++++++++++++------------ 1 file changed, 21 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 6a0cc367934d..c9e220963a78 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -12354,27 +12354,36 @@ static void intel_setup_outputs(struct drm_device *dev) if (I915_READ(PCH_DP_D) & DP_DETECTED) intel_dp_init(dev, PCH_DP_D, PORT_D); } else if (IS_VALLEYVIEW(dev)) { - if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIB) & SDVO_DETECTED) { + /* + * The DP_DETECTED bit is the latched state of the DDC + * SDA pin at boot. However since eDP doesn't require DDC + * (no way to plug in a DP->HDMI dongle) the DDC pins for + * eDP ports may have been muxed to an alternate function. + * Thus we can't rely on the DP_DETECTED bit alone to detect + * eDP ports. Consult the VBT as well as DP_DETECTED to + * detect eDP ports. + */ + if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIB) & SDVO_DETECTED) intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIB, PORT_B); - if (I915_READ(VLV_DISPLAY_BASE + DP_B) & DP_DETECTED) - intel_dp_init(dev, VLV_DISPLAY_BASE + DP_B, PORT_B); - } + if (I915_READ(VLV_DISPLAY_BASE + DP_B) & DP_DETECTED || + intel_dp_is_edp(dev, PORT_B)) + intel_dp_init(dev, VLV_DISPLAY_BASE + DP_B, PORT_B); - if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIC) & SDVO_DETECTED) { + if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIC) & SDVO_DETECTED) intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIC, PORT_C); - if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED) - intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C); - } + if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED || + intel_dp_is_edp(dev, PORT_C)) + intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C); if (IS_CHERRYVIEW(dev)) { - if (I915_READ(VLV_DISPLAY_BASE + CHV_HDMID) & SDVO_DETECTED) { + if (I915_READ(VLV_DISPLAY_BASE + CHV_HDMID) & SDVO_DETECTED) intel_hdmi_init(dev, VLV_DISPLAY_BASE + CHV_HDMID, PORT_D); - if (I915_READ(VLV_DISPLAY_BASE + DP_D) & DP_DETECTED) - intel_dp_init(dev, VLV_DISPLAY_BASE + DP_D, PORT_D); - } + /* eDP not supported on port D, so don't check VBT */ + if (I915_READ(VLV_DISPLAY_BASE + DP_D) & DP_DETECTED) + intel_dp_init(dev, VLV_DISPLAY_BASE + DP_D, PORT_D); } intel_dsi_init(dev); -- cgit v1.2.3 From 07c338ce98263a5af631b991dd8f96cff6ca2548 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 2 Oct 2014 11:16:32 +0300 Subject: drm/i915: fix short vs. long hpd detection MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix short vs. long hpd detection for non-g4x and non-pch split platforms. Broken since introduction in commit 13cf550448b58abf8f44f5d6a560f2d20871c965 Author: Dave Airlie Date: Wed Jun 18 11:29:35 2014 +1000 drm/i915: rework digital port IRQ handling (v2) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83175 Reviewed-by: Ville Syrjälä Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_irq.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 54bf54706d1d..f66392b6e287 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1711,7 +1711,7 @@ static irqreturn_t gen8_gt_irq_handler(struct drm_device *dev, #define HPD_STORM_DETECT_PERIOD 1000 #define HPD_STORM_THRESHOLD 5 -static int ilk_port_to_hotplug_shift(enum port port) +static int pch_port_to_hotplug_shift(enum port port) { switch (port) { case PORT_A: @@ -1727,7 +1727,7 @@ static int ilk_port_to_hotplug_shift(enum port port) } } -static int g4x_port_to_hotplug_shift(enum port port) +static int i915_port_to_hotplug_shift(enum port port) { switch (port) { case PORT_A: @@ -1785,12 +1785,12 @@ static inline void intel_hpd_irq_handler(struct drm_device *dev, if (port && dev_priv->hpd_irq_port[port]) { bool long_hpd; - if (IS_G4X(dev)) { - dig_shift = g4x_port_to_hotplug_shift(port); - long_hpd = (hotplug_trigger >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT; - } else { - dig_shift = ilk_port_to_hotplug_shift(port); + if (HAS_PCH_SPLIT(dev)) { + dig_shift = pch_port_to_hotplug_shift(port); long_hpd = (dig_hotplug_reg >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT; + } else { + dig_shift = i915_port_to_hotplug_shift(port); + long_hpd = (hotplug_trigger >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT; } DRM_DEBUG_DRIVER("digital hpd port %c - %s\n", -- cgit v1.2.3