UBUNTU: Ubuntu-2.6.35-980.1release1ti-ubuntu-2.6.35-980.1release1

Signed-off-by: Sebastien Jan <s-jan@ti.com>

2 files changed, 142 insertions, 10 deletions

diff --git a/debian.ti-omap4/abi/2.6.35-980.0/armel/omap4 b/debian.ti-omap4/abi/2.6.35-980.0/armel/omap4
index 4d68f5826c77..011eac1bd072 100644
--- a/debian.ti-omap4/abi/2.6.35-980.0/armel/omap4
+++ b/debian.ti-omap4/abi/2.6.35-980.0/armel/omap4
@@ -1431,16 +1431,14 @@ EXPORT_SYMBOL vmlinux 0x00000000	abe_remote_debugger_interface
 EXPORT_SYMBOL vmlinux 0x00000000	abe_reset_hal
 EXPORT_SYMBOL vmlinux 0x00000000	abe_reset_port
 EXPORT_SYMBOL vmlinux 0x00000000	abe_select_data_source
-EXPORT_SYMBOL vmlinux 0x00000000	abe_select_main_port
 EXPORT_SYMBOL vmlinux 0x00000000	abe_set_debug_trace
-EXPORT_SYMBOL vmlinux 0x00000000	abe_set_dmic_filter
 EXPORT_SYMBOL vmlinux 0x00000000	abe_set_opp_processing
 EXPORT_SYMBOL vmlinux 0x00000000	abe_set_ping_pong_buffer
 EXPORT_SYMBOL vmlinux 0x00000000	abe_set_router_configuration
 EXPORT_SYMBOL vmlinux 0x00000000	abe_set_sequence_time_accuracy
 EXPORT_SYMBOL vmlinux 0x00000000	abe_stop_event_generator
 EXPORT_SYMBOL vmlinux 0x00000000	abe_unmute_gain
-EXPORT_SYMBOL vmlinux 0x00000000	abe_update_gain
+EXPORT_SYMBOL vmlinux 0x00000000	abe_use_compensated_gain
 EXPORT_SYMBOL vmlinux 0x00000000	abe_write_aps
 EXPORT_SYMBOL vmlinux 0x00000000	abe_write_asrc
 EXPORT_SYMBOL vmlinux 0x00000000	abe_write_equalizer
@@ -2489,9 +2487,6 @@ EXPORT_SYMBOL vmlinux 0x00000000	groups_free
 EXPORT_SYMBOL vmlinux 0x00000000	half_md4_transform
 EXPORT_SYMBOL vmlinux 0x00000000	handle_sysrq
 EXPORT_SYMBOL vmlinux 0x00000000	have_submounts
-EXPORT_SYMBOL vmlinux 0x00000000	hdmi_get_audio_format
-EXPORT_SYMBOL vmlinux 0x00000000	hdmi_get_audio_video_latency
-EXPORT_SYMBOL vmlinux 0x00000000	hdmi_get_image_format
 EXPORT_SYMBOL vmlinux 0x00000000	hdmi_get_pixel_append_position
 EXPORT_SYMBOL vmlinux 0x00000000	heapbufmp_alloc
 EXPORT_SYMBOL vmlinux 0x00000000	heapbufmp_close
@@ -2770,6 +2765,7 @@ EXPORT_SYMBOL vmlinux 0x00000000	ipu_pm_detach
 EXPORT_SYMBOL vmlinux 0x00000000	ipu_pm_get_config
 EXPORT_SYMBOL vmlinux 0x00000000	ipu_pm_get_handle
 EXPORT_SYMBOL vmlinux 0x00000000	ipu_pm_mem_req
+EXPORT_SYMBOL vmlinux 0x00000000	ipu_pm_module_set_bandwidth
 EXPORT_SYMBOL vmlinux 0x00000000	ipu_pm_module_set_latency
 EXPORT_SYMBOL vmlinux 0x00000000	ipu_pm_module_set_rate
 EXPORT_SYMBOL vmlinux 0x00000000	ipu_pm_module_start
@@ -7726,6 +7722,7 @@ EXPORT_SYMBOL_GPL vmlinux 0x00000000	usb_anchor_urb
 EXPORT_SYMBOL_GPL vmlinux 0x00000000	usb_bulk_msg
 EXPORT_SYMBOL_GPL vmlinux 0x00000000	usb_bus_list
 EXPORT_SYMBOL_GPL vmlinux 0x00000000	usb_bus_list_lock
+EXPORT_SYMBOL_GPL vmlinux 0x00000000	usb_bus_start_enum
 EXPORT_SYMBOL_GPL vmlinux 0x00000000	usb_calc_bus_time
 EXPORT_SYMBOL_GPL vmlinux 0x00000000	usb_clear_halt
 EXPORT_SYMBOL_GPL vmlinux 0x00000000	usb_control_msg
diff --git a/debian.ti-omap4/changelog b/debian.ti-omap4/changelog
index 023553263a01..f1cc720597b5 100644
--- a/debian.ti-omap4/changelog
+++ b/debian.ti-omap4/changelog
@@ -1,8 +1,143 @@
-linux-ti-omap4 (2.6.35-980.1) UNRELEASED; urgency=low
+linux-ti-omap4 (2.6.35-980.1release1) maverick; urgency=low
 
-  CHANGELOG: Do not edit directly. Autogenerated at release.
-  CHANGELOG: Use the printchanges target to see the curent changes.
-  CHANGELOG: Use the insertchanges target to create the final log.
+  [ Sebastien Jan ]
+
+  * Revert "auto-generate uImage file"
+  * [Config] Align with L24.11-p2 LDC kernel config
+
+  [ Upstream Kernel Changes ]
+
+  * OMAP4: Enable ondemand governor in the defconfig
+  * ASoC: twl6040: Increase timeout for power up
+  * ASoC: TWL6040: Use correct offset for LineInAmp Right
+  * ARM: OMAP4: Add GPLv2 header to twl6040-codec.h
+  * OMAP4: TWL6040: Use twl6040-codec MFD header
+  * ASoC: core - make BE ref counting per stream
+  * ASoC: ABE DAI - do BE stream ref count
+  * ASoC: ABE DSP: Update to HAL release 08.50
+  * ASoC: ABE DSP: Update driver code according to ABE HAL 08.50 API update
+  * ASoC: ABE DSP: Remove warnings
+  * omap:iodmm-make dma call for flushing configurable
+  * syslink: rproc - add support for START and STOP events
+  * omap: 4430sdp: Minimize existing defconfig
+  * omap: 4430sdp: Update for USB and TIWLAN_SDIO
+  * I2C: runtime: Fix checks which make legacy suspend to never get called
+  * omap4: debug: L3 interconnect error handling
+  * mmc: fix compilation warning
+  * RCCR and XCCR register values are modified to enable transfer and
+  * mfd: twl6030 gpadc calibration
+  * usb: omap: Runtime pm for EHCI and OHCI
+  * usb: ehci-omap: Move Kconfig option to proper location
+  * omap4: kill compile warning
+  * mmc: failure of block read wait for long time
+  * OMAP4: V4L2/DSS - Fix wrong configuration for YUV422
+  * DSS2: Fix crash seen when debugging is enabled
+  * OMAP4: DSS WB - Fix wrong size configuration
+  * OMAP: DSS2: Fixed device resolution change notification handler
+  * DSS: Set channel output in _dispc_setup_plane.
+  * OMAP4:DSS:HDMI: Patch to add seperate edid.c
+  * OMAP4:DSS:HDMI:Patch to incorporate edid.c changes in hdmi files.
+  * OMAP4:DSS:HDMI:Patch to read the Audio Video and VSDB YUV information
+  * OMAP4:DSS:HDMI:Patch to read AVI Infoframe in HDMI
+  * OMAP4:DSS:HDMI:Patch to add RGB->YUV conversion support in AVI
+    inforframe
+  * OMAP4: DSS: HDMI: Use Display's kobject for uevent
+  * DSS2: Add a state variable for dss_mainclk
+  * DSS2: Return from omap_dss_mgr_apply if main clock is disabled
+  * DSS2/V4L2: Fail to register DSS isr if mainclk is diabled
+  * ASoC: twl6040 - Fix TLV dB step values for gains.
+  * ASoC: OMAP4: Align max number of channels for UL
+  * ASoC: ABE DSP: Update driver for ABE PM management
+  * ASoC: ABE DSP: Add API to stop the event generator
+  * ASoC: ABE DAI: Align-mcbsp-configuration
+  * ASoC: ABE-DSP: Add support for sidetone equalizer
+  * ASoC: ABE-DSP: Add support for DMIC equalizer
+  * ASoC: ABE-DSP: Correct typo in control name
+  * ASoC: ABE-DSP: Update DL1 & DL2 equalizers coeffs
+  * POWER: TWL6030 BCI sysfs and Fuel Gauge
+  * OMAP4: PM: Enable Device RET support
+  * ASoC: ABE DSP: Update transition mode between OPP50/OPP100 mode
+  * SYSLINK:IPU-PM-move iommu handles to attach and detach
+  * omap:iommu-event notification shouldn't be blocking call
+  * syslink: devh - call rproc_stop if IOMMUCLOSE is received
+  * rproc: add protection to rproc_eventdf_ntfy
+  * rproc: fix missing common proc args to match userspace
+  * Changes made to remove warnings during compilation
+  * OMAP4: PM: Disable SR in idle and enable AUTO RET
+  * OMAP: Suppress spurious info prints in the voltage layer
+  * To enable CONFIG_WIFI_CONTROL_FUNC in the sdp4430 and panda defconfig
+  * Adding a WVGA timings in OMAPFB mode database
+  * OMAPFB: TILER 16bpp support
+  * OMAP4:DSS:HDMI:Patch to fix SYNC_LOST_DIGIT error when switching the
+    timings with custom_edid_timing
+  * OMAP: PM: In resume only increment the device usecount
+  * OMAP: DSS: WB: Cleanup for WB
+  * OMAP4:DSS:HDMI:Patch to get the prints with custom_edid_timing
+  * OMAP4:DSS:HDMI:This fixes the HDMI Hot-plug detect inconsistency issue
+    in OMAP4
+  * usb: musb: Enable the usbphy clocks only for OMAP4
+  * TWL6030 : USBOTG VBUS event generation on charger VBUS events.
+  * TWL6030: usb: Twl6030-usb tranciever support.
+  * TWL6030: usb: enabling twl6030-usb tranciever in Kconfig.
+  * usb: musb: Enable cable based otg support.
+  * usb: musb: Fix for non pm build break
+  * DSS2/V4L2: Fix: Do not check omap_dispc_register_isr for errors
+  * Adding set_timings and check_timings in TAAL
+  * omap:omap-pm: fix warning in omap_pm_set_min_bus_tput()
+  * OMAPFB: Adding support for dynamically changing bpp in case of TILER
+    buffers
+  * V4L2: Assign YUYV to 2 bytes per pixel in omap_vout_try_format
+  * DSS2: Fix debugfs feature for DSI
+  * DSS2: Fix debugfs dispc clocks
+  * OMAP4: RLS_NOTES: Adding release notes for L24.11
+  * syslink:ipu_pm: add L3 bw and fdif cstr
+  * Context save and restore of McBSP SYSCONFIG register
+  * OMAP4: PM: Dynamically calculate vsel values for diff PMIC
+  * ASoC: ABE DSP: Fix main port algorithm
+  * omap4: l2x0: Set share override bit of Pl310
+  * usb: musb:Fix for core retention with usb disabled
+  * OMAP: musb: Remove the omap_hwmod_lookup call in the interrupt disabled
+    context.
+  * usb: musb: fix for unloading the musb driver
+  * OMAP4:DSS2: Fix clk debugfs support when DSS clocks are off
+  * OMAP: DSS2: Improved interlaced mode support
+  * V4L2/DSS2: Add support for bottom/top interlaced formats.
+  * DSS2: Simplify TILER orientation logic.
+  * DSS2: Simplify rotation_type handling in _disp_setup_plane
+  * DSS2: OMAP4: Added pre-decimation support for overlays
+  * OMAP4:DSS2: Refined predecimation 3/5-tap decision logic.
+  * OMAP4:DSS2: Fix WB patch YUYV handling similarly to normal YUYV
+    handling
+  * OMAP/DSS2: Do not set channel out in overlay's set_manager if OFF
+  * OMAP/DSS2: Add error status to mainclk and opt_clock enable methods.
+  * OMAP/DSS2: Disable devices that failed to resume.
+  * OMAP4:DSS:HDMI:Patch to add 1280 800 @ 60Hz timing.
+  * OMAP4:DSS:HDMI:Patch to add correct Vsync and Hsync polarity for all
+    the timing values
+  * OMAP4:DSS:HDMI:Patch to fix the pixel clock value for 1280 * 768 VESA
+    timing
+  * DSS2: Fix precednece for dispc irq masks
+  * DSS2: Revert back to original way of calculating tiler orientation
+    parameters
+  * DSS2: Add NV12 color format for bpp calculation in configure_overlay
+  * Correcting base address for WB FIR2
+  * OMAP: DSS2: WB settings cleanup
+  * adding register dumps for WB
+  * WB GO bit should not be used in memory mode
+  * OMAP: V4L2/WB: Use 4 byte TILER container for YUYV
+  * DSS2: Fix Clarity issues seen in YUYV rotation
+  * DSS2: Fix: Take positive values of pm_runtime_get_sync as a successful
+    return value
+  * syslink:ipu_pm: send pid_death just to appm3
+  * syslink: notifier - add a mutext per notify_object
+  * SYSLINK : Disable devh notification for tiler events.
+  * omap: remoteproc - fix sparse warnings in remote proc about static
+  * omap:iodmm-cleanup and fixes
+  * omap:iodmm-send notification on close only when resources not free
+  * omap:remoteproc: enable gpt3&4 for ipu hibernation
+  * syslink:ipu_pm: allow IPU hibernation
+  * omap:iommu: restore just the prsvd tlb entries
+  * pandaboard: Enable device RET support
 
  -- Sebastien JAN <s-jan@ti.com>  Wed, 03 Nov 2010 18:05:03 +0100