summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/hwmon/index.rst1
-rw-r--r--Documentation/hwmon/kfan.rst39
-rw-r--r--drivers/hwmon/Kconfig10
-rw-r--r--drivers/hwmon/Makefile1
-rw-r--r--drivers/hwmon/kfan.c246
5 files changed, 297 insertions, 0 deletions
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 946b8a266d89..983aa0233e4a 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -107,6 +107,7 @@ Hardware Monitoring Kernel Drivers
k10temp
k8temp
kbatt
+ kfan
lan966x
lineage-pem
lm25066
diff --git a/Documentation/hwmon/kfan.rst b/Documentation/hwmon/kfan.rst
new file mode 100644
index 000000000000..ce02dddfb4b8
--- /dev/null
+++ b/Documentation/hwmon/kfan.rst
@@ -0,0 +1,39 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver kfan
+==================
+
+Supported chips:
+
+ * KEBA fan controller (IP core in FPGA)
+
+ Prefix: 'kfan'
+
+Authors:
+
+ Gerhard Engleder <eg@keba.com>
+ Petar Bojanic <boja@keba.com>
+
+Description
+-----------
+
+The KEBA fan controller is an IP core for FPGAs, which monitors the health
+and controls the speed of a fan. The fan is typically used to cool the CPU
+and the whole device. E.g., the CP500 FPGA includes this IP core to monitor
+and control the fan of PLCs and the corresponding cp500 driver creates an
+auxiliary device for the kfan driver.
+
+This driver provides information about the fan health to user space.
+The user space shall be informed if the fan is removed or blocked.
+Additionally, the speed in RPM is reported for fans with tacho signal.
+
+For fan control PWM is supported. For PWM 255 equals 100%. None-regulable
+fans can be turned on with PWM 255 and turned off with PWM 0.
+
+====================== ==== ===================================================
+Attribute R/W Contents
+====================== ==== ===================================================
+fan1_fault R Fan fault
+fan1_input R Fan tachometer input (in RPM)
+pwm1 RW Fan target duty cycle (0..255)
+====================== ==== ===================================================
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 80e277448c71..01b21fe55ccd 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -345,6 +345,16 @@ config SENSORS_KBATT
This driver can also be built as a module. If so, the module
will be called kbatt.
+config SENSORS_KFAN
+ tristate "KEBA fan controller support"
+ depends on KEBA_CP500
+ help
+ This driver supports the fan controller found in KEBA system
+ FPGA devices.
+
+ This driver can also be built as a module. If so, the module
+ will be called kfan.
+
config SENSORS_FAM15H_POWER
tristate "AMD Family 15h processor power"
depends on X86 && PCI && CPU_SUP_AMD
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 50df221f67c2..c34a0ae658e0 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -111,6 +111,7 @@ obj-$(CONFIG_SENSORS_JC42) += jc42.o
obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
obj-$(CONFIG_SENSORS_K10TEMP) += k10temp.o
obj-$(CONFIG_SENSORS_KBATT) += kbatt.o
+obj-$(CONFIG_SENSORS_KFAN) += kfan.o
obj-$(CONFIG_SENSORS_LAN966X) += lan966x-hwmon.o
obj-$(CONFIG_SENSORS_LENOVO_EC) += lenovo-ec-sensors.o
obj-$(CONFIG_SENSORS_LINEAGE) += lineage-pem.o
diff --git a/drivers/hwmon/kfan.c b/drivers/hwmon/kfan.c
new file mode 100644
index 000000000000..f353acb66749
--- /dev/null
+++ b/drivers/hwmon/kfan.c
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 KEBA Industrial Automation GmbH
+ *
+ * Driver for KEBA fan controller FPGA IP core
+ *
+ */
+
+#include <linux/hwmon.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/auxiliary_bus.h>
+#include <linux/misc/keba.h>
+
+#define KFAN "kfan"
+
+#define KFAN_CONTROL_REG 0x04
+
+#define KFAN_STATUS_REG 0x08
+#define KFAN_STATUS_PRESENT 0x01
+#define KFAN_STATUS_REGULABLE 0x02
+#define KFAN_STATUS_TACHO 0x04
+#define KFAN_STATUS_BLOCKED 0x08
+
+#define KFAN_TACHO_REG 0x0c
+
+#define KFAN_DEFAULT_DIV 2
+
+struct kfan {
+ void __iomem *base;
+ bool tacho;
+ bool regulable;
+
+ /* hwmon API configuration */
+ u32 fan_channel_config[2];
+ struct hwmon_channel_info fan_info;
+ u32 pwm_channel_config[2];
+ struct hwmon_channel_info pwm_info;
+ const struct hwmon_channel_info *info[3];
+ struct hwmon_chip_info chip;
+};
+
+static bool kfan_get_fault(struct kfan *kfan)
+{
+ u8 status = ioread8(kfan->base + KFAN_STATUS_REG);
+
+ if (!(status & KFAN_STATUS_PRESENT))
+ return true;
+
+ if (!kfan->tacho && (status & KFAN_STATUS_BLOCKED))
+ return true;
+
+ return false;
+}
+
+static unsigned int kfan_count_to_rpm(u16 count)
+{
+ if (count == 0 || count == 0xffff)
+ return 0;
+
+ return 5000000UL / (KFAN_DEFAULT_DIV * count);
+}
+
+static unsigned int kfan_get_rpm(struct kfan *kfan)
+{
+ unsigned int rpm;
+ u16 count;
+
+ count = ioread16(kfan->base + KFAN_TACHO_REG);
+ rpm = kfan_count_to_rpm(count);
+
+ return rpm;
+}
+
+static unsigned int kfan_get_pwm(struct kfan *kfan)
+{
+ return ioread8(kfan->base + KFAN_CONTROL_REG);
+}
+
+static int kfan_set_pwm(struct kfan *kfan, long val)
+{
+ if (val < 0 || val > 0xff)
+ return -EINVAL;
+
+ /* if none-regulable, then only 0 or 0xff can be written */
+ if (!kfan->regulable && val > 0)
+ val = 0xff;
+
+ iowrite8(val, kfan->base + KFAN_CONTROL_REG);
+
+ return 0;
+}
+
+static int kfan_write(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long val)
+{
+ struct kfan *kfan = dev_get_drvdata(dev);
+
+ switch (type) {
+ case hwmon_pwm:
+ switch (attr) {
+ case hwmon_pwm_input:
+ return kfan_set_pwm(kfan, val);
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int kfan_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct kfan *kfan = dev_get_drvdata(dev);
+
+ switch (type) {
+ case hwmon_fan:
+ switch (attr) {
+ case hwmon_fan_fault:
+ *val = kfan_get_fault(kfan);
+ return 0;
+ case hwmon_fan_input:
+ *val = kfan_get_rpm(kfan);
+ return 0;
+ default:
+ break;
+ }
+ break;
+ case hwmon_pwm:
+ switch (attr) {
+ case hwmon_pwm_input:
+ *val = kfan_get_pwm(kfan);
+ return 0;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static umode_t kfan_is_visible(const void *data, enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ switch (type) {
+ case hwmon_fan:
+ switch (attr) {
+ case hwmon_fan_input:
+ return 0444;
+ case hwmon_fan_fault:
+ return 0444;
+ default:
+ break;
+ }
+ break;
+ case hwmon_pwm:
+ switch (attr) {
+ case hwmon_pwm_input:
+ return 0644;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static const struct hwmon_ops kfan_hwmon_ops = {
+ .is_visible = kfan_is_visible,
+ .read = kfan_read,
+ .write = kfan_write,
+};
+
+static int kfan_probe(struct auxiliary_device *auxdev,
+ const struct auxiliary_device_id *id)
+{
+ struct keba_fan_auxdev *kfan_auxdev =
+ container_of(auxdev, struct keba_fan_auxdev, auxdev);
+ struct device *dev = &auxdev->dev;
+ struct device *hwmon_dev;
+ struct kfan *kfan;
+ u8 status;
+
+ kfan = devm_kzalloc(dev, sizeof(*kfan), GFP_KERNEL);
+ if (!kfan)
+ return -ENOMEM;
+
+ kfan->base = devm_ioremap_resource(dev, &kfan_auxdev->io);
+ if (IS_ERR(kfan->base))
+ return PTR_ERR(kfan->base);
+
+ status = ioread8(kfan->base + KFAN_STATUS_REG);
+ if (status & KFAN_STATUS_REGULABLE)
+ kfan->regulable = true;
+ if (status & KFAN_STATUS_TACHO)
+ kfan->tacho = true;
+
+ /* fan */
+ kfan->fan_channel_config[0] = HWMON_F_FAULT;
+ if (kfan->tacho)
+ kfan->fan_channel_config[0] |= HWMON_F_INPUT;
+ kfan->fan_info.type = hwmon_fan;
+ kfan->fan_info.config = kfan->fan_channel_config;
+ kfan->info[0] = &kfan->fan_info;
+
+ /* PWM */
+ kfan->pwm_channel_config[0] = HWMON_PWM_INPUT;
+ kfan->pwm_info.type = hwmon_pwm;
+ kfan->pwm_info.config = kfan->pwm_channel_config;
+ kfan->info[1] = &kfan->pwm_info;
+
+ kfan->chip.ops = &kfan_hwmon_ops;
+ kfan->chip.info = kfan->info;
+ hwmon_dev = devm_hwmon_device_register_with_info(dev, KFAN, kfan,
+ &kfan->chip, NULL);
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct auxiliary_device_id kfan_devtype_aux[] = {
+ { .name = "keba.fan" },
+ {}
+};
+MODULE_DEVICE_TABLE(auxiliary, kfan_devtype_aux);
+
+static struct auxiliary_driver kfan_driver_aux = {
+ .name = KFAN,
+ .id_table = kfan_devtype_aux,
+ .probe = kfan_probe,
+};
+module_auxiliary_driver(kfan_driver_aux);
+
+MODULE_AUTHOR("Petar Bojanic <boja@keba.com>");
+MODULE_AUTHOR("Gerhard Engleder <eg@keba.com>");
+MODULE_DESCRIPTION("KEBA fan controller driver");
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-25 14:54:31 +0000