| Age | Commit message (Collapse) | Author |
|---|
|
Fix the error_reads mode - it's incompatible with corrupt_bio_byte, but
that's only enabled if corrupt_bio_byte is nonzero.
Cc: Benjamin Marzinski <bmarzins@redhat.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: dm-devel@lists.linux.dev
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Fixes for a few clk drivers and bindings:
- Add a missing property to the Mediatek MT8188 clk binding to
keep binding checks happy
- Avoid an OOB by setting the correct number of parents in
dispmix_csr_clk_dev_data
- Allocate clk_hw structs early in probe to avoid an ordering
issue where clk_parent_data points to an unallocated clk_hw
when the child clk is registered before the parent clk in the
SCMI clk driver
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
dt-bindings: clock: mediatek: Add #reset-cells property for MT8188
clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data
clk: scmi: Handle case where child clocks are initialized before their parents
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a case of recursive locking in the MSI code
- Fix a randconfig build failure in armada-370-xp irqchip
* tag 'irq_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-msi-lib: Fix build with PCI disabled
PCI/MSI: Prevent recursive locking in pci_msix_write_tph_tag()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Track apple Root Ports explicitly and look up the driver data from
the struct device instead of using dev->driver_data, which is used by
pci_host_common_init() for the generic host bridge pointer (Marc
Zyngier)
- Set dev->driver_data before pci_host_common_init() calls
gen_pci_init() because some drivers need it to set up ECAM mappings;
this fixes a regression on MicroChip MPFS Icicle (Geert Uytterhoeven)
- Revert the now-unnecessary use of ECAM pci_config_window.priv to
store a copy of dev->driver_data (Marc Zyngier)
* tag 'pci-v6.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
Revert "PCI: ecam: Allow cfg->priv to be pre-populated from the root port device"
PCI: host-generic: Set driver_data before calling gen_pci_init()
PCI: apple: Add tracking of probed root ports
|
|
Pull drm fixes from Simona Vetter:
"Cross-subsystem Changes:
- agp/amd64 binding dmesg noise regression fix
Core Changes:
- fix race in gem_handle_create_tail
- fixup handle_count fb refcount regression from -rc5, popular with
reports ...
- call rust dtor for drm_device release
Driver Changes:
- nouveau: magic 50ms suspend fix, acpi leak fix
- tegra: dma api error in nvdec
- pvr: fix device reset
- habanalbs maintainer update
- intel display: fix some dsi mipi sequences
- xe fixes: SRIOV fixes, small GuC fixes, disable indirect ring due
to issues, compression fix for fragmented BO, doc update
* tag 'drm-fixes-2025-07-12' of https://gitlab.freedesktop.org/drm/kernel: (22 commits)
drm/xe/guc: Default log level to non-verbose
drm/xe/bmg: Don't use WA 16023588340 and 22019338487 on VF
drm/xe/guc: Recommend GuC v70.46.2 for BMG, LNL, DG2
drm/xe/pm: Correct comment of xe_pm_set_vram_threshold()
drm/xe: Release runtime pm for error path of xe_devcoredump_read()
drm/xe/pm: Restore display pm if there is error after display suspend
drm/i915/bios: Apply vlv_fixup_mipi_sequences() to v2 mipi-sequences too
drm/gem: Fix race in drm_gem_handle_create_tail()
drm/framebuffer: Acquire internal references on GEM handles
agp/amd64: Check AGP Capability before binding to unsupported devices
drm/xe/bmg: fix compressed VRAM handling
Revert "drm/xe/xe2: Enable Indirect Ring State support for Xe2"
drm/xe: Allocate PF queue size on pow2 boundary
drm/xe/pf: Clear all LMTT pages on alloc
drm/nouveau/gsp: fix potential leak of memory used during acpi init
rust: drm: remove unnecessary imports
MAINTAINERS: Change habanalabs maintainer
drm/imagination: Fix kernel crash when hard resetting the GPU
drm/tegra: nvdec: Fix dma_alloc_coherent error check
rust: drm: device: drop_in_place() the drm::Device in release()
...
|
|
Pull block fixes from Jens Axboe:
- MD changes via Yu:
- fix UAF due to stack memory used for bio mempool (Jinchao)
- fix raid10/raid1 nowait IO error path (Nigel and Qixing)
- fix kernel crash from reading bitmap sysfs entry (Håkon)
- Fix for a UAF in the nbd connect error path
- Fix for blocksize being bigger than pagesize, if THP isn't enabled
* tag 'block-6.16-20250710' of git://git.kernel.dk/linux:
block: reject bs > ps block devices when THP is disabled
nbd: fix uaf in nbd_genl_connect() error path
md/md-bitmap: fix GPF in bitmap_get_stats()
md/raid1,raid10: strip REQ_NOWAIT from member bios
raid10: cleanup memleak at raid10_make_request
md/raid1: Fix stack memory use after return in raid1_reshape
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull more networking fixes from Jakub Kicinski
"Big chunk of fixes for WiFi, Johannes says probably the last for the
release.
The Netlink fixes (on top of the tree) restore operation of iw (WiFi
CLI) which uses sillily small recv buffer, and is the reason for this
'emergency PR'.
The GRE multicast fix also stands out among the user-visible
regressions.
Current release - fix to a fix:
- netlink: make sure we always allow at least one skb to be queued,
even if the recvbuf is (mis)configured to be tiny
Previous releases - regressions:
- gre: fix IPv6 multicast route creation
Previous releases - always broken:
- wifi: prevent A-MSDU attacks in mesh networks
- wifi: cfg80211: fix S1G beacon head validation and detection
- wifi: mac80211:
- always clear frame buffer to prevent stack leak in cases which
hit a WARN()
- fix monitor interface in device restart
- wifi: mwifiex: discard erroneous disassoc frames on STA interface
- wifi: mt76:
- prevent null-deref in mt7925_sta_set_decap_offload()
- add missing RCU annotations, and fix sleep in atomic
- fix decapsulation offload
- fixes for scanning
- phy: microchip: improve link establishment and reset handling
- eth: mlx5e: fix race between DIM disable and net_dim()
- bnxt_en: correct DMA unmap len for XDP_REDIRECT"
* tag 'net-6.16-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
netlink: make sure we allow at least one dump skb
netlink: Fix rmem check in netlink_broadcast_deliver().
bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT
bnxt_en: Flush FW trace before copying to the coredump
bnxt_en: Fix DCB ETS validation
net: ll_temac: Fix missing tx_pending check in ethtools_set_ringparam()
net/mlx5e: Add new prio for promiscuous mode
net/mlx5e: Fix race between DIM disable and net_dim()
net/mlx5: Reset bw_share field when changing a node's parent
can: m_can: m_can_handle_lost_msg(): downgrade msg lost in rx message to debug level
selftests: net: lib: fix shift count out of range
selftests: Add IPv6 multicast route generation tests for GRE devices.
gre: Fix IPv6 multicast route creation.
net: phy: microchip: limit 100M workaround to link-down events on LAN88xx
net: phy: microchip: Use genphy_soft_reset() to purge stale LPA bits
ibmvnic: Fix hardcoded NUM_RX_STATS/NUM_TX_STATS with dynamic sizeof
net: appletalk: Fix device refcount leak in atrtr_create()
netfilter: flowtable: account for Ethernet header in nf_flow_pppoe_proto()
wifi: mac80211: add the virtual monitor after reconfig complete
wifi: mac80211: always initialize sdata::key_list
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix performance regression when setting values of multiple GPIO lines
at once
- make sure the GPIO OF xlate code doesn't end up passing an
uninitialized local variable to GPIO core
- update MAINTAINERS
* tag 'gpio-fixes-for-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: remove bouncing address for Nandor Han
gpio: of: initialize local variable passed to the .of_xlate() callback
gpiolib: fix performance regression when using gpio_chip_get_multiple()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a coding mistake in a previous fix related to system suspend and
hibernation merged recently"
* tag 'pm-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Call pm_restore_gfp_mask() after dpm_resume()
|
|
When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set()
with the proper length instead of 0. This bug triggers this warning
on a system with IOMMU enabled:
WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170
RIP: 0010:__iommu_dma_unmap+0x159/0x170
Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45
b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00
RSP: 0018:ff22d31181150c88 EFLAGS: 00010206
RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000
R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000
R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00
FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0
PKRU: 55555554
Call Trace:
<IRQ>
? show_regs+0x6d/0x80
? __warn+0x89/0x160
? __iommu_dma_unmap+0x159/0x170
? report_bug+0x17e/0x1b0
? handle_bug+0x46/0x90
? exc_invalid_op+0x18/0x80
? asm_exc_invalid_op+0x1b/0x20
? __iommu_dma_unmap+0x159/0x170
? __iommu_dma_unmap+0xb3/0x170
iommu_dma_unmap_page+0x4f/0x100
dma_unmap_page_attrs+0x52/0x220
? srso_alias_return_thunk+0x5/0xfbef5
? xdp_return_frame+0x2e/0xd0
bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en]
__bnxt_poll_work_done+0x81/0x1e0 [bnxt_en]
bnxt_poll+0xd3/0x1e0 [bnxt_en]
Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250710213938.1959625-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnxt_fill_drv_seg_record() calls bnxt_dbg_hwrm_log_buffer_flush()
to flush the FW trace buffer. This needs to be done before we
call bnxt_copy_ctx_mem() to copy the trace data.
Without this fix, the coredump may not contain all the FW
traces.
Fixes: 3c2179e66355 ("bnxt_en: Add FW trace coredump segments to the coredump")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250710213938.1959625-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In bnxt_ets_validate(), the code incorrectly loops over all possible
traffic classes to check and add the ETS settings. Fix it to loop
over the configured traffic classes only.
The unconfigured traffic classes will default to TSA_ETS with 0
bandwidth. Looping over these unconfigured traffic classes may
cause the validation to fail and trigger this error message:
"rejecting ETS config starving a TC\n"
The .ieee_setets() will then fail.
Fixes: 7df4ae9fe855 ("bnxt_en: Implement DCBNL to support host-based DCBX.")
Reviewed-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250710213938.1959625-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function ll_temac_ethtools_set_ringparam() incorrectly checked
rx_pending twice, once correctly for RX and once mistakenly in place
of tx_pending. This caused tx_pending to be left unchecked against
TX_BD_NUM_MAX.
As a result, invalid TX ring sizes may have been accepted or valid
ones wrongly rejected based on the RX limit, leading to potential
misconfiguration or unexpected results.
This patch corrects the condition to properly validate tx_pending.
Fixes: f7b261bfc35e ("net: ll_temac: Make RX/TX ring sizes configurable")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250710180621.2383000-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
An optimization for promiscuous mode adds a high-priority steering
table with a single catch-all rule to steer all traffic directly to
the TTC table.
However, a gap exists between the creation of this table and the
insertion of the catch-all rule. Packets arriving in this brief window
would miss as no rule was inserted yet, unnecessarily incrementing the
'rx_steer_missed_packets' counter and dropped.
This patch resolves the issue by introducing a new prio for this
table, placing it between MLX5E_TC_PRIO and MLX5E_NIC_PRIO. By doing
so, packets arriving during the window now fall through to the next
prio (at MLX5E_NIC_PRIO) instead of being dropped.
Fixes: 1c46d7409f30 ("net/mlx5e: Optimize promiscuous mode")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1752155624-24095-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There's a race between disabling DIM and NAPI callbacks using the dim
pointer on the RQ or SQ.
If NAPI checks the DIM state bit and sees it still set, it assumes
`rq->dim` or `sq->dim` is valid. But if DIM gets disabled right after
that check, the pointer might already be set to NULL, leading to a NULL
pointer dereference in net_dim().
Fix this by calling `synchronize_net()` before freeing the DIM context.
This ensures all in-progress NAPI callbacks are finished before the
pointer is cleared.
Kernel log:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:net_dim+0x23/0x190
...
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x150/0x3e0
? common_interrupt+0xf/0xa0
? sysvec_call_function_single+0xb/0x90
? exc_page_fault+0x74/0x130
? asm_exc_page_fault+0x22/0x30
? net_dim+0x23/0x190
? mlx5e_poll_ico_cq+0x41/0x6f0 [mlx5_core]
? sysvec_apic_timer_interrupt+0xb/0x90
mlx5e_handle_rx_dim+0x92/0xd0 [mlx5_core]
mlx5e_napi_poll+0x2cd/0xac0 [mlx5_core]
? mlx5e_poll_ico_cq+0xe5/0x6f0 [mlx5_core]
busy_poll_stop+0xa2/0x200
? mlx5e_napi_poll+0x1d9/0xac0 [mlx5_core]
? mlx5e_trigger_irq+0x130/0x130 [mlx5_core]
__napi_busy_loop+0x345/0x3b0
? sysvec_call_function_single+0xb/0x90
? asm_sysvec_call_function_single+0x16/0x20
? sysvec_apic_timer_interrupt+0xb/0x90
? pcpu_free_area+0x1e4/0x2e0
napi_busy_loop+0x11/0x20
xsk_recvmsg+0x10c/0x130
sock_recvmsg+0x44/0x70
__sys_recvfrom+0xbc/0x130
? __schedule+0x398/0x890
__x64_sys_recvfrom+0x20/0x30
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
...
---[ end trace 0000000000000000 ]---
...
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Fixes: 445a25f6e1a2 ("net/mlx5e: Support updating coalescing configuration without resetting channels")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1752155624-24095-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When changing a node's parent, its scheduling element is destroyed and
re-created with bw_share 0. However, the node's bw_share field was not
updated accordingly.
Set the node's bw_share to 0 after re-creation to keep the software
state in sync with the firmware configuration.
Fixes: 9c7bbf4c3304 ("net/mlx5: Add support for setting parent of nodes")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1752155624-24095-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.16-rc6 or final:
- Fix nouveau fail on debugfs errors.
- Magic 50 ms to fix nouveau suspend.
- Call rust destructor on drm device release.
- Fix DMA api error handling in tegra/nvdec.
- Fix PVR device reset.
- Habanalabs maintainer update.
- Small memory leak fix when nouveau acpi init fails.
- Do not attempt to bind to any PCI device with AGP capability.
- Make FB's acquire handles on backing object, same as i915/xe already does.
- Fix race in drm_gem_handle_create_tail.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e522cdc7-1787-48f2-97e5-0f94783970ab@linux.intel.com
|
|
debug level
Downgrade the "msg lost in rx" message to debug level, to prevent
flooding the kernel log with error messages.
Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support")
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250711-mcan_ratelimit-v3-1-7413e8e21b84@geanix.com
[mkl: enhance commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Clear LMTT page to avoid leaking data from one VF to another
- Align PF queue size to power of 2
- Disable Indirect Ring State to avoid intermittent issues on context
switch: feature is not currently needed, so can be disabled for now.
- Fix compression handling when the BO pages are very fragmented
- Restore display pm on error path
- Fix runtime pm handling in xe devcoredump
- Fix xe_pm_set_vram_threshold() doc
- Recommend new minor versions of GuC firmware
- Drop some workarounds on VF
- Do not use verbose GuC logging by default: it should be only for
debugging
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/s6jyd24mimbzb4vxtgc5vupvbyqplfep2c6eupue7znnlbhuxy@lmvzexfzhrnn
|
|
Currently xe sets the guc log level to a verbose level since it's useful
to debug hangs and general development. However the verbose level may
already be too much and affect performance.
Michal Mrozek did some tests with the L0 compute stack for submission
latency with ULLS disabled. Below are the normalized numbers with log
level 3 (the current default) as baseline for each test:
Test \ Log Level 3 0 1 2
----------------------------------------------------------- ------ ------ ------ ------
BestWalkerNthCommandListSubmission(CmdListCount=2) 1.00 0.63 0.63 0.96
BestWalkerNthSubmission(KernelCount=2) 1.00 0.62 0.63 0.96
BestWalkerNthSubmissionImmediate(KernelCount=2) 1.00 0.58 0.58 0.85
BestWalkerSubmission 1.00 0.62 0.62 0.96
BestWalkerSubmissionImmediate 1.00 0.63 0.62 0.96
BestWalkerSubmissionImmediateMultiCmdlists(cmdlistCount=2) 1.00 0.58 0.58 0.86
BestWalkerSubmissionImmediateMultiCmdlists(cmdlistCount=4) 1.00 0.70 0.70 0.83
BestWalkerSubmissionImmediateMultiCmdlists(cmdlistCount=8) 1.00 0.53 0.52 0.78
Log level 2 is the first "verbose level" for GuC, where the biggest
difference happens. Keep log level 3 for CONFIG_DRM_XE_DEBUG, but switch
to 1, i.e. GUC_LOG_LEVEL_NON_VERBOSE, for "normal" builds.
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250613-guc-log-level-v2-1-cb84a63e49fe@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit a37128ba613ad6a5f81f382fa3cfe5c4a6527310)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
These workarounds are not applicable for use by the VFs.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Tested-by: Jakub Kolakowski <jakub1.kolakowski@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Signed-off-by: Jakub Kolakowski <jakub1.kolakowski@intel.com>
Link: https://lore.kernel.org/r/20250710103040.375610-2-jakub1.kolakowski@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 1d2e2503e506ddc499cbb7afdc8b70bcf6fe241f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
UAPI compatibility version 1.22.2
Resolves various bugs. Recommend newer version.
Signed-off-by: Julia Filipchuk <julia.filipchuk@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250626182805.1701096-13-daniele.ceraolospurio@intel.com
(cherry picked from commit 0b64addcae7f04745bc5f62d41e27268052f812e)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The parameter threshold is with size in MiB, not in bits.
Correct it to avoid any confusion.
v2: s/mb/MiB, s/vram/VRAM, fix return section. (Michal)
Fixes: 30c399529f4c ("drm/xe: Document Xe PM component")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20250708021450.3602087-2-shuicheng.lin@intel.com
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 0efec0500117947f924e5ac83be40f96378af85a)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
xe_pm_runtime_put() is missed to be called for the error path in
xe_devcoredump_read().
Add function description comments for xe_devcoredump_read() to help
understand it.
v2: more detail function comments and refine goto logic (Matt)
Fixes: c4a2e5f865b7 ("drm/xe: Add devcoredump chunking")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250707004911.3502904-6-shuicheng.lin@intel.com
(cherry picked from commit 017ef1228d735965419ff118fe1b89089e772c42)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
xe_bo_evict_all() is called after xe_display_pm_suspend(). So if there
is error with xe_bo_evict_all(), display pm should be restored.
Fixes: 51462211f4a9 ("drm/xe/pxp: add PXP PM support")
Fixes: cb8f81c17531 ("drm/xe/display: Make display suspend/resume work on discrete")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://lore.kernel.org/r/20250708035424.3608190-2-shuicheng.lin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 83dcee17855c4e5af037ae3262809036de127903)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Restrict the 100Mbit forced-mode workaround to link-down transitions
only, to prevent repeated link reset cycles in certain configurations.
The workaround was originally introduced to improve signal reliability
when switching cables between long and short distances. It temporarily
forces the PHY into 10 Mbps before returning to 100 Mbps.
However, when used with autonegotiating link partners (e.g., Intel i350),
executing this workaround on every link change can confuse the partner
and cause constant renegotiation loops. This results in repeated link
down/up transitions and the PHY never reaching a stable state.
Limit the workaround to only run during the PHY_NOLINK state. This ensures
it is triggered only once per link drop, avoiding disruptive toggling
while still preserving its intended effect.
Note: I am not able to reproduce the original issue that this workaround
addresses. I can only confirm that 100 Mbit mode works correctly in my
test setup. Based on code inspection, I assume the workaround aims to
reset some internal state machine or signal block by toggling speeds.
However, a PHY reset is already performed earlier in the function via
phy_init_hw(), which may achieve a similar effect. Without a reproducer,
I conservatively keep the workaround but restrict its conditions.
Fixes: e57cf3639c32 ("net: lan78xx: fix accessing the LAN7800's internal phy specific registers from the MAC driver")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250709130753.3994461-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable .soft_reset for the LAN88xx PHY driver by assigning
genphy_soft_reset() to ensure that the phylib core performs a proper
soft reset during reconfiguration.
Previously, the driver left .soft_reset unimplemented, so calls to
phy_init_hw() (e.g., from lan88xx_link_change_notify()) did not fully
reset the PHY. As a result, stale contents in the Link Partner Ability
(LPA) register could persist, causing the PHY to incorrectly report
that the link partner advertised autonegotiation even when it did not.
Using genphy_soft_reset() guarantees a clean reset of the PHY and
corrects the false autoneg reporting in these scenarios.
Fixes: ccb989e4d1ef ("net: phy: microchip: Reset LAN88xx PHY to ensure clean link state on LAN7800/7850")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250709130753.3994461-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The previous hardcoded definitions of NUM_RX_STATS and
NUM_TX_STATS were not updated when new fields were added
to the ibmvnic_{rx,tx}_queue_stats structures. Specifically,
commit 2ee73c54a615 ("ibmvnic: Add stat for tx direct vs tx
batched") added a fourth TX stat, but NUM_TX_STATS remained 3,
leading to a mismatch.
This patch replaces the static defines with dynamic sizeof-based
calculations to ensure the stat arrays are correctly sized.
This fixes incorrect indexing and prevents incomplete stat
reporting in tools like ethtool.
Fixes: 2ee73c54a615 ("ibmvnic: Add stat for tx direct vs tx batched")
Signed-off-by: Mingming Cao <mmc@linux.ibm.com>
Reviewed-by: Dave Marquardt <davemarq@linux.ibm.com>
Reviewed-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250709153332.73892-1-mmc@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Quite a number of fixes still:
- mt76 (hadn't sent any fixes so far)
- RCU
- scanning
- decapsulation offload
- interface combinations
- rt2x00: build fix (bad function pointer prototype)
- cfg80211: prevent A-MSDU flipping attacks in mesh
- zd1211rw: prevent race ending with NULL ptr deref
- cfg80211/mac80211: more S1G fixes
- mwifiex: avoid WARN on certain RX frames
- mac80211:
- avoid stack data leak in WARN cases
- fix non-transmitted BSSID search
(on certain multi-BSSID APs)
- always initialize key list so driver
iteration won't crash
- fix monitor interface in device restart
- fix __free() annotation usage
* tag 'wireless-2025-07-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (26 commits)
wifi: mac80211: add the virtual monitor after reconfig complete
wifi: mac80211: always initialize sdata::key_list
wifi: mac80211: Fix uninitialized variable with __free() in ieee80211_ml_epcs()
wifi: mt76: mt792x: Limit the concurrent STA and SoftAP to operate on the same channel
wifi: mt76: mt7925: Fix null-ptr-deref in mt7925_thermal_init()
wifi: mt76: fix queue assignment for deauth packets
wifi: mt76: add a wrapper for wcid access with validation
wifi: mt76: mt7921: prevent decap offload config before STA initialization
wifi: mt76: mt7925: prevent NULL pointer dereference in mt7925_sta_set_decap_offload()
wifi: mt76: mt7925: fix incorrect scan probe IE handling for hw_scan
wifi: mt76: mt7925: fix invalid array index in ssid assignment during hw scan
wifi: mt76: mt7925: fix the wrong config for tx interrupt
wifi: mt76: Remove RCU section in mt7996_mac_sta_rc_work()
wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl()
wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl_fixed()
wifi: mt76: Move RCU section in mt7996_mcu_set_fixed_field()
wifi: mt76: Assume __mt76_connac_mcu_alloc_sta_req runs in atomic context
wifi: prevent A-MSDU attacks in mesh networks
wifi: rt2x00: fix remove callback type mismatch
wifi: mac80211: reject VHT opmode for unsupported channel widths
...
====================
Link: https://patch.msgid.link/20250710122212.24272-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pci_msix_write_tph_tag() takes the per device MSI descriptor mutex and then
invokes msi_domain_get_virq(), which takes the same mutex again. That
obviously results in a system hang which is exposed by a softlockup or
lockdep warning.
Move the lock guard after the invocation of msi_domain_get_virq() to fix
this.
[ tglx: Massage changelog by adding a proper explanation and removing the
not really useful stacktrace ]
Fixes: d5124a9957b2 ("PCI/MSI: Provide a sane mechanism for TPH")
Reported-by: Jorge Lopez <jorge.jo.lopez@oracle.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jorge Lopez <jorge.jo.lopez@oracle.com>
Link: https://lore.kernel.org/all/20250708222530.1041477-1-himanshu.madhani@oracle.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth.
Current release - regressions:
- tcp: refine sk_rcvbuf increase for ooo packets
- bluetooth: fix attempting to send HCI_Disconnect to BIS handle
- rxrpc: fix over large frame size warning
- eth: bcmgenet: initialize u64 stats seq counter
Previous releases - regressions:
- tcp: correct signedness in skb remaining space calculation
- sched: abort __tc_modify_qdisc if parent class does not exist
- vsock: fix transport_{g2h,h2g} TOCTOU
- rxrpc: fix bug due to prealloc collision
- tipc: fix use-after-free in tipc_conn_close().
- bluetooth: fix not marking Broadcast Sink BIS as connected
- phy: qca808x: fix WoL issue by utilizing at8031_set_wol()
- eth: am65-cpsw-nuss: fix skb size by accounting for skb_shared_info
Previous releases - always broken:
- netlink: fix wraparounds of sk->sk_rmem_alloc.
- atm: fix infinite recursive call of clip_push().
- eth:
- stmmac: fix interrupt handling for level-triggered mode in DWC_XGMAC2
- rtsn: fix a null pointer dereference in rtsn_probe()"
* tag 'net-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
net/sched: sch_qfq: Fix null-deref in agg_dequeue
rxrpc: Fix oops due to non-existence of prealloc backlog struct
rxrpc: Fix bug due to prealloc collision
MAINTAINERS: remove myself as netronome maintainer
selftests/net: packetdrill: add tcp_ooo-before-and-after-accept.pkt
tcp: refine sk_rcvbuf increase for ooo packets
net/sched: Abort __tc_modify_qdisc if parent class does not exist
net: ethernet: ti: am65-cpsw-nuss: Fix skb size by accounting for skb_shared_info
net: thunderx: avoid direct MTU assignment after WRITE_ONCE()
selftests/tc-testing: Create test case for UAF scenario with DRR/NETEM/BLACKHOLE chain
atm: clip: Fix NULL pointer dereference in vcc_sendmsg()
atm: clip: Fix infinite recursive call of clip_push().
atm: clip: Fix memory leak of struct clip_vcc.
atm: clip: Fix potential null-ptr-deref in to_atmarpd().
net: phy: smsc: Fix link failure in forced mode with Auto-MDIX
net: phy: smsc: Force predictable MDI-X state on LAN87xx
net: phy: smsc: Fix Auto-MDIX configuration when disabled by strap
net: stmmac: Fix interrupt handling for level-triggered mode in DWC_XGMAC2
rxrpc: Fix over large frame size warning
net: airoha: Fix an error handling path in airoha_probe()
...
|
|
It turns out that the fixup from vlv_fixup_mipi_sequences() is necessary
for some DSI panel's with version 2 mipi-sequences too.
Specifically the Acer Iconia One 8 A1-840 (not to be confused with the
A1-840FHD which is different) has the following sequences:
BDB block 53 (1284 bytes) - MIPI sequence block:
Sequence block version v2
Panel 0 *
Sequence 2 - MIPI_SEQ_INIT_OTP
GPIO index 9, source 0, set 0 (0x00)
Delay: 50000 us
GPIO index 9, source 0, set 1 (0x01)
Delay: 6000 us
GPIO index 9, source 0, set 0 (0x00)
Delay: 6000 us
GPIO index 9, source 0, set 1 (0x01)
Delay: 25000 us
Send DCS: Port A, VC 0, LP, Type 39, Length 5, Data ff aa 55 a5 80
Send DCS: Port A, VC 0, LP, Type 39, Length 3, Data 6f 11 00
...
Send DCS: Port A, VC 0, LP, Type 05, Length 1, Data 29
Delay: 120000 us
Sequence 4 - MIPI_SEQ_DISPLAY_OFF
Send DCS: Port A, VC 0, LP, Type 05, Length 1, Data 28
Delay: 105000 us
Send DCS: Port A, VC 0, LP, Type 05, Length 2, Data 10 00
Delay: 10000 us
Sequence 5 - MIPI_SEQ_ASSERT_RESET
Delay: 10000 us
GPIO index 9, source 0, set 0 (0x00)
Notice how there is no MIPI_SEQ_DEASSERT_RESET, instead the deassert
is done at the beginning of MIPI_SEQ_INIT_OTP, which is exactly what
the fixup from vlv_fixup_mipi_sequences() fixes up.
Extend it to also apply to v2 sequences, this fixes the panel not working
on the Acer Iconia One 8 A1-840.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14605
Signed-off-by: Hans de Goede <hansg@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250703143824.7121-1-hansg@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 11895f375939d60efe7ed5dddc1cffe2e79f976c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
skb_shared_info
While transitioning from netdev_alloc_ip_align() to build_skb(), memory
for the "skb_shared_info" member of an "skb" was not allocated. Fix this
by allocating "PAGE_SIZE" as the skb length, accounting for the packet
length, headroom and tailroom, thereby including the required memory space
for skb_shared_info.
Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Link: https://patch.msgid.link/20250707085201.1898818-1-c-vankar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current logic in nicvf_change_mtu() writes the new MTU to
netdev->mtu using WRITE_ONCE() before verifying if the hardware
update succeeds. However on hardware update failure, it attempts
to revert to the original MTU using a direct assignment
(netdev->mtu = orig_mtu)
which violates the intended of WRITE_ONCE protection introduced in
commit 1eb2cded45b3 ("net: annotate writes on dev->mtu from
ndo_change_mtu()")
Additionally, WRITE_ONCE(netdev->mtu, new_mtu) is unnecessarily
performed even when the device is not running.
Fix this by:
Only writing netdev->mtu after successfully updating the hardware.
Skipping hardware update when the device is down, and setting MTU
directly. Remove unused variable orig_mtu.
This ensures that all writes to netdev->mtu are consistent with
WRITE_ONCE expectations and avoids unintended state corruption
on failure paths.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250706194327.1369390-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 12ffc3b1513e ("PM: Restrict swap use to later in the suspend
sequence") changed two pm_restore_gfp_mask() calls in enter_state()
and hibernation_restore() into one pm_restore_gfp_mask() call in
dpm_resume_end(), but it put that call before the dpm_resume()
invocation which is too early (some swap-backing devices may not be
ready at that point).
Moreover, this code ordering change was not even mentioned in the
changelog of the commit mentioned above.
Address this by moving that call after the dpm_resume() one.
Fixes: 12ffc3b1513e ("PM: Restrict swap use to later in the suspend sequence")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/2797018.mvXUDI8C0e@rjwysocki.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Mark som pins as invalid for IRQ use in the Qualcomm driver
- Fix up the use of device properties on the MA35DX Nuvoton, apparently
something went sidewise
- Clear the GPIO debounce settings when going down for suspend in the
AMD driver. Very good for some AMD laptops that now wake up from
suspend again!
- Add the compulsory .can_sleep bool flag in the AW9523 driver, should
have been there from the beginning, now there are users finding the
bug
- Drop some bouncing email address from MAINTAINERS
* tag 'pinctrl-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: aw9523: fix can_sleep flag for GPIO chip
pinctrl: amd: Clear GPIO debounce for suspend
pinctrl: nuvoton: Fix boot on ma35dx platforms
MAINTAINERS: drop bouncing Lakshmi Sowjanya D
pinctrl: qcom: msm: mark certain pins as invalid for interrupts
|
|
of_flags is passed down to GPIO chip's xlate function, so ensure this one
is properly initialized as - if the xlate callback does nothing with it
- we may end up with various configuration errors like:
gpio-720 (enable): multiple pull-up, pull-down or pull-disable enabled, invalid configuration
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20250708083829.658051-1-alexander.stein@ew.tq-group.com
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Object creation is a careful dance where we must guarantee that the
object is fully constructed before it is visible to other threads, and
GEM buffer objects are no difference.
Final publishing happens by calling drm_gem_handle_create(). After
that the only allowed thing to do is call drm_gem_object_put() because
a concurrent call to the GEM_CLOSE ioctl with a correctly guessed id
(which is trivial since we have a linear allocator) can already tear
down the object again.
Luckily most drivers get this right, the very few exceptions I've
pinged the relevant maintainers for. Unfortunately we also need
drm_gem_handle_create() when creating additional handles for an
already existing object (e.g. GETFB ioctl or the various bo import
ioctl), and hence we cannot have a drm_gem_handle_create_and_put() as
the only exported function to stop these issues from happening.
Now unfortunately the implementation of drm_gem_handle_create() isn't
living up to standards: It does correctly finishe object
initialization at the global level, and hence is safe against a
concurrent tear down. But it also sets up the file-private aspects of
the handle, and that part goes wrong: We fully register the object in
the drm_file.object_idr before calling drm_vma_node_allow() or
obj->funcs->open, which opens up races against concurrent removal of
that handle in drm_gem_handle_delete().
Fix this with the usual two-stage approach of first reserving the
handle id, and then only registering the object after we've completed
the file-private setup.
Jacek reported this with a testcase of concurrently calling GEM_CLOSE
on a freshly-created object (which also destroys the object), but it
should be possible to hit this with just additional handles created
through import or GETFB without completed destroying the underlying
object with the concurrent GEM_CLOSE ioctl calls.
Note that the close-side of this race was fixed in f6cd7daecff5 ("drm:
Release driver references to handle before making it available
again"), which means a cool 9 years have passed until someone noticed
that we need to make this symmetry or there's still gaps left :-/
Without the 2-stage close approach we'd still have a race, therefore
that's an integral part of this bugfix.
More importantly, this means we can have NULL pointers behind
allocated id in our drm_file.object_idr. We need to check for that
now:
- drm_gem_handle_delete() checks for ERR_OR_NULL already
- drm_gem.c:object_lookup() also chekcs for NULL
- drm_gem_release() should never be called if there's another thread
still existing that could call into an IOCTL that creates a new
handle, so cannot race. For paranoia I added a NULL check to
drm_gem_object_release_handle() though.
- most drivers (etnaviv, i915, msm) are find because they use
idr_find(), which maps both ENOENT and NULL to NULL.
- drivers using idr_for_each_entry() should also be fine, because
idr_get_next does filter out NULL entries and continues the
iteration.
- The same holds for drm_show_memory_stats().
v2: Use drm_WARN_ON (Thomas)
Reported-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Tested-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: stable@vger.kernel.org
Cc: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Signed-off-by: Simona Vetter <simona.vetter@intel.com>
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250707151814.603897-1-simona.vetter@ffwll.ch
|
|
Acquire GEM handles in drm_framebuffer_init() and release them in
the corresponding drm_framebuffer_cleanup(). Ties the handle's
lifetime to the framebuffer. Not all GEM buffer objects have GEM
handles. If not set, no refcounting takes place. This is the case
for some fbdev emulation. This is not a problem as these GEM objects
do not use dma-bufs and drivers will not release them while fbdev
emulation is running. Framebuffer flags keep a bit per color plane
of which the framebuffer holds a GEM handle reference.
As all drivers use drm_framebuffer_init(), they will now all hold
dma-buf references as fixed in commit 5307dce878d4 ("drm/gem: Acquire
references on GEM handles for framebuffers").
In the GEM framebuffer helpers, restore the original ref counting
on buffer objects. As the helpers for handle refcounting are now
no longer called from outside the DRM core, unexport the symbols.
v3:
- don't mix internal flags with mode flags (Christian)
v2:
- track framebuffer handle refs by flag
- drop gma500 cleanup (Christian)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 5307dce878d4 ("drm/gem: Acquire references on GEM handles for framebuffers")
Reported-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://lore.kernel.org/dri-devel/20250703115915.3096-1-spasswolf@web.de/
Tested-by: Bert Karwatzki <spasswolf@web.de>
Tested-by: Mario Limonciello <superm1@kernel.org>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Anusha Srivatsa <asrivats@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: <stable@vger.kernel.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250707131224.249496-1-tzimmermann@suse.de
|
|
Since commit 172efbb40333 ("AGP: Try unsupported AGP chipsets on x86-64
by default"), the AGP driver for AMD Opteron/Athlon64 CPUs has attempted
to bind to any PCI device possessing an AGP Capability.
Commit 6fd024893911 ("amd64-agp: Probe unknown AGP devices the right
way") subsequently reworked the driver to perform a bind attempt to
any PCI device (regardless of AGP Capability) and reject a device in
the driver's ->probe() hook if it lacks the AGP Capability.
On modern CPUs exposing an AMD IOMMU, this subtle change results in an
annoying message with KERN_CRIT severity:
pci 0000:00:00.2: Resources present before probing
The message is emitted by the driver core prior to invoking a driver's
->probe() hook. The check for an AGP Capability in the ->probe() hook
happens too late to prevent the message.
The message has appeared only recently with commit 3be5fa236649 (Revert
"iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices").
Prior to the commit, no driver could bind to AMD IOMMUs.
The reason for the message is that an MSI is requested early on for the
AMD IOMMU, which results in a call from msi_sysfs_create_group() to
devm_device_add_group(). A devres resource is thus attached to the
driver-less AMD IOMMU, which is normally not allowed, but presumably
cannot be avoided because requesting the MSI from a regular PCI driver
might be too late.
Avoid the message by once again checking for an AGP Capability *before*
binding to an unsupported device. Achieve that by way of the PCI core's
dynid functionality.
pci_add_dynid() can fail only with -ENOMEM (on allocation failure) or
-EINVAL (on bus_to_subsys() failure). It doesn't seem worth the extra
code to propagate those error codes out of the for_each_pci_dev() loop,
so simply error out with -ENODEV if there was no successful bind attempt.
In the -ENOMEM case, a splat is emitted anyway, and the -EINVAL case can
never happen because it requires failure of bus_register(&pci_bus_type),
in which case there's no driver probing of PCI devices.
Hans has voiced a preference to no longer probe unsupported devices by
default (i.e. set agp_try_unsupported = 0). In fact, the help text for
CONFIG_AGP_AMD64 pretends this to be the default. Alternatively, he
proposes probing only devices with PCI_CLASS_BRIDGE_HOST. However these
approaches risk regressing users who depend on the existing behavior.
Fixes: 3be5fa236649 (Revert "iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices")
Reported-by: Fedor Pchelkin <pchelkin@ispras.ru>
Closes: https://lore.kernel.org/r/wpoivftgshz5b5aovxbkxl6ivvquinukqfvb5z6yi4mv7d25ew@edtzr2p74ckg/
Reported-by: Hans de Goede <hansg@kernel.org>
Closes: https://lore.kernel.org/r/20250625112411.4123-1-hansg@kernel.org/
Tested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/b29e7fbfc6d146f947603d0ebaef44cbd2f0d754.1751468802.git.lukas@wunner.de
|
|
Force a fixed MDI-X mode when auto-negotiation is disabled to prevent
link instability.
When forcing the link speed and duplex on a LAN9500 PHY (e.g., with
`ethtool -s eth0 autoneg off ...`) while leaving MDI-X control in auto
mode, the PHY fails to establish a stable link. This occurs because the
PHY's Auto-MDIX algorithm is not designed to operate when
auto-negotiation is disabled. In this state, the PHY continuously
toggles the TX/RX signal pairs, which prevents the link partner from
synchronizing.
This patch resolves the issue by detecting when auto-negotiation is
disabled. If the MDI-X control mode is set to 'auto', the driver now
forces a specific, stable mode (ETH_TP_MDI) to prevent the pair
toggling. This choice of a fixed MDI mode mirrors the behavior the
hardware would exhibit if the AUTOMDIX_EN strap were configured for a
fixed MDI connection.
Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Andre Edich <andre.edich@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250703114941.3243890-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Override the hardware strap configuration for MDI-X mode to ensure a
predictable initial state for the driver. The initial mode of the LAN87xx
PHY is determined by the AUTOMDIX_EN strap pin, but the driver has no
documented way to read its latched status.
This unpredictability means the driver cannot know if the PHY has
initialized with Auto-MDIX enabled or disabled, preventing it from
providing a reliable interface to the user.
This patch introduces a `config_init` hook that forces the PHY into a
known state by explicitly enabling Auto-MDIX.
Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Andre Edich <andre.edich@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250703114941.3243890-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct the Auto-MDIX configuration to ensure userspace settings are
respected when the feature is disabled by the AUTOMDIX_EN hardware strap.
The LAN9500 PHY allows its default MDI-X mode to be configured via a
hardware strap. If this strap sets the default to "MDI-X off", the
driver was previously unable to enable Auto-MDIX from userspace.
When handling the ETH_TP_MDI_AUTO case, the driver would set the
SPECIAL_CTRL_STS_AMDIX_ENABLE_ bit but neglected to set the required
SPECIAL_CTRL_STS_OVRRD_AMDIX_ bit. Without the override flag, the PHY
falls back to its hardware strap default, ignoring the software request.
This patch corrects the behavior by also setting the override bit when
enabling Auto-MDIX. This ensures that the userspace configuration takes
precedence over the hardware strap, allowing Auto-MDIX to be enabled
correctly in all scenarios.
Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Andre Edich <andre.edich@microchip.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250703114941.3243890-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the Synopsys Controller IP XGMAC-10G Ethernet MAC Databook
v3.30a (section 2.7.2), when the INTM bit in the DMA_Mode register is set
to 2, the sbd_perch_tx_intr_o[] and sbd_perch_rx_intr_o[] signals operate
in level-triggered mode. However, in this configuration, the DMA does not
assert the XGMAC_NIS status bit for Rx or Tx interrupt events.
This creates a functional regression where the condition
if (likely(intr_status & XGMAC_NIS)) in dwxgmac2_dma_interrupt() will
never evaluate to true, preventing proper interrupt handling for
level-triggered mode. The hardware specification explicitly states that
"The DMA does not assert the NIS status bit for the Rx or Tx interrupt
events" (Synopsys DWC_XGMAC2 Databook v3.30a, sec. 2.7.2).
The fix ensures correct handling of both edge and level-triggered
interrupts while maintaining backward compatibility with existing
configurations. It has been tested on the hardware device (not publicly
available), and it can properly trigger the RX and TX interrupt handling
in both the INTM=0 and INTM=2 configurations.
Fixes: d6ddfacd95c7 ("net: stmmac: Add DMA related callbacks for XGMAC2")
Tested-by: EricChan <chenchuangyu@xiaomi.com>
Signed-off-by: EricChan <chenchuangyu@xiaomi.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250703020449.105730-1-chenchuangyu@xiaomi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"Two fixes for v6.16-rc6
The first patch fixes an embarrassing bug in the pwm core. I really
wonder this wasn't found earlier since it's introduction in v6.11-rc1
as it greatly disturbs driving a PWM via sysfs.
The second and last patch fixes a clock balance issue in an error path
of the Mediatek PWM driver"
* tag 'pwm/for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: mediatek: Ensure to disable clocks in error path
pwm: Fix invalid state detection
|
|
If an error occurs after a successful airoha_hw_init() call,
airoha_ppe_deinit() needs to be called as already done in the remove
function.
Fixes: 00a7678310fe ("net: airoha: Introduce flowtable offload support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/1c940851b4fa3c3ed2a142910c821493a136f121.1746715755.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add check for the return value of rcar_gen4_ptp_alloc()
to prevent potential null pointer dereference.
Fixes: b0d3969d2b4d ("net: ethernet: rtsn: Add support for Renesas Ethernet-TSN")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20250703100109.2541018-1-haoxiang_li2024@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There looks to be an issue in our compression handling when the BO pages
are very fragmented, where we choose to skip the identity map and
instead fall back to emitting the PTEs by hand when migrating memory,
such that we can hopefully do more work per blit operation. However in
such a case we need to ensure the src PTEs are correctly tagged with a
compression enabled PAT index on dgpu xe2+, otherwise the copy will
simply treat the src memory as uncompressed, leading to corruption if
the memory was compressed by the user.
To fix this pass along use_comp_pat into emit_pte() on the src side, to
indicate that compression should be considered.
v2 (Jonathan): tweak the commit message
Fixes: 523f191cc0c7 ("drm/xe/xe_migrate: Handle migration logic for xe2+ dgfx")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Akshata Jahagirdar <akshata.jahagirdar@intel.com>
Cc: <stable@vger.kernel.org> # v6.12+
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250701103949.83116-2-matthew.auld@intel.com
(cherry picked from commit f7a2fd776e57bd6468644bdecd91ab3aba57ba58)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
This reverts commit fe0154cf8222d9e38c60ccc124adb2f9b5272371.
Seeing some unexplained random failures during LRC context switches with
indirect ring state enabled. The failures were always there, but the
repro rate increased with the addition of WA BB as a separate BO.
Commit 3a1edef8f4b5 ("drm/xe: Make WA BB part of LRC BO") helped to
reduce the issues in the context switches, but didn't eliminate them
completely.
Indirect ring state is not required for any current features, so disable
for now until failures can be root caused.
Cc: stable@vger.kernel.org
Fixes: fe0154cf8222 ("drm/xe/xe2: Enable Indirect Ring State support for Xe2")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250702035846.3178344-1-matthew.brost@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 03d85ab36bcbcbe9dc962fccd3f8e54d7bb93b35)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
CIRC_SPACE does not work unless the size argument is a power of 2,
allocate PF queue size on power of 2 boundary.
Cc: stable@vger.kernel.org
Fixes: 3338e4f90c14 ("drm/xe: Use topology to determine page fault queue size")
Fixes: 29582e0ea75c ("drm/xe: Add page queue multiplier")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://lore.kernel.org/r/20250702213511.3226167-1-matthew.brost@intel.com
(cherry picked from commit 491b9783126303755717c0cbde0b08ee59b6abab)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
