Merge tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds

Pull LED updates from Lee Jones:
 "New Drivers:
   - Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs
   - Add support for Awinic AW20036/AW20054/AW20072 LEDs

  New Device Support:
   - Add support for PMI632 LPG to QCom LPG
   - Add support for PMI8998 to QCom Flash
   - Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC

  New Functionality:
   - Implement the LP55xx Charge Pump
   - Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC
   - Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC
   - Enable per-pin resolution Pinctrl in LEDs GPIO

  Fix-ups:
   - Allow thread to sleep by switching from spinlock to mutex
   - Add lots of Device Tree bindings / support
   - Adapt relationships / dependencies driven by Kconfig
   - Switch I2C drivers from .probe_new() to .probe()
   - Remove superfluous / duplicate code
   - Replace strlcpy() with strscpy() for efficiency and overflow prevention
   - Staticify various functions
   - Trivial: Fixing coding style
   - Simplify / reduce code

  Bug Fixes:
   - Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename
   - Repair race between led_set_brightness(LED_{OFF,FULL})
   - Fix Oops relating to sleeping in critical sections
   - Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger
   - Do not leak resources in error handling paths
   - Fix unsigned comparison which can never be negative
   - Provide missing NULL terminating entries in tables
   - Fix misnaming issues"

* tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (53 commits)
  leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks
  leds: sgm3140: Add richtek,rt5033-led compatible
  dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
  dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks"
  dt-bindings: leds: Drop unneeded quotes
  leds: Fix config reference for AW200xx driver
  leds: leds-mt6323: Add support for WLEDs and MT6332
  leds: leds-mt6323: Add support for MT6331 leds
  leds: leds-mt6323: Open code and drop MT6323_CAL_HW_DUTY macro
  leds: leds-mt6323: Drop MT6323_ prefix from macros and defines
  leds: leds-mt6323: Specify registers and specs in platform data
  dt-bindings: leds: leds-mt6323: Document mt6332 compatible
  dt-bindings: leds: leds-mt6323: Document mt6331 compatible
  leds: simatic-ipc-leds-gpio: Introduce more Kconfig switches
  leds: simatic-ipc-leds-gpio: Split up into multiple drivers
  leds: simatic-ipc-leds-gpio: Move two extra gpio pins into another table
  leds: simatic-ipc-leds-gpio: Add terminating entries to gpio tables
  leds: flash: leds-qcom-flash: Fix an unsigned comparison which can never be negative
  leds: cht-wcove: Remove unneeded semicolon
  leds: cht-wcove: Fix an unsigned comparison which can never be negative
  ...

1 files changed, 13 insertions, 4 deletions

diff --git a/drivers/leds/flash/leds-qcom-flash.c b/drivers/leds/flash/leds-qcom-flash.c
index 90a24fa25a49..b089ca1a1901 100644
--- a/drivers/leds/flash/leds-qcom-flash.c
+++ b/drivers/leds/flash/leds-qcom-flash.c
@@ -18,7 +18,8 @@
 #define FLASH_TYPE_VAL			0x18
 
 #define FLASH_SUBTYPE_REG		0x05
-#define FLASH_SUBTYPE_3CH_VAL		0x04
+#define FLASH_SUBTYPE_3CH_PM8150_VAL	0x04
+#define FLASH_SUBTYPE_3CH_PMI8998_VAL	0x03
 #define FLASH_SUBTYPE_4CH_VAL		0x07
 
 #define FLASH_STS_3CH_OTST1		BIT(0)
@@ -416,6 +417,14 @@ static int qcom_flash_led_brightness_set(struct led_classdev *led_cdev,
 	bool enable = !!brightness;
 	int rc;
 
+	rc = set_flash_strobe(led, SW_STROBE, false);
+	if (rc)
+		return rc;
+
+	rc = set_flash_module_en(led, false);
+	if (rc)
+		return rc;
+
 	rc = set_flash_current(led, current_ma, TORCH_MODE);
 	if (rc)
 		return rc;
@@ -529,9 +538,9 @@ static int qcom_flash_register_led_device(struct device *dev,
 	struct led_init_data init_data;
 	struct led_classdev_flash *flash = &led->flash;
 	struct led_flash_setting *brightness, *timeout;
-	u32 count, current_ua, timeout_us;
+	u32 current_ua, timeout_us;
 	u32 channels[4];
-	int i, rc;
+	int i, rc, count;
 
 	count = fwnode_property_count_u32(node, "led-sources");
 	if (count <= 0) {
@@ -682,7 +691,7 @@ static int qcom_flash_led_probe(struct platform_device *pdev)
 		return rc;
 	}
 
-	if (val == FLASH_SUBTYPE_3CH_VAL) {
+	if (val == FLASH_SUBTYPE_3CH_PM8150_VAL || val == FLASH_SUBTYPE_3CH_PMI8998_VAL) {
 		flash_data->hw_type = QCOM_MVFLASH_3CH;
 		flash_data->max_channels = 3;
 		regs = mvflash_3ch_regs;