| Age | Commit message (Collapse) | Author |
|---|
|
v4l_bound_align_image() aligns to a multiple of 2 to the power of
walign, not to walign. Depending on the pixel format, this causes the
image width to be aligned to 16 or 256 pixels instead of 4 or 8 as
required by the hardware. Fix it by rounding and clamping the width and
height manually.
Closes: https://lore.kernel.org/linux-media/CAJ+vNU0BOVLTL17ofgHwtexbpuMYwH_aGUC==EXABUtHHiv_ag@mail.gmail.com
Reported-by: Tim Harvey <tharvey@gateworks.com>
Fixes: 6f482c4729d9 ("media: imx: imx7-media-csi: Get rid of superfluous call to imx7_csi_mbus_fmt_to_pix_fmt")
Co-developed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Use the __imx7_csi_video_try_fmt() helper function to initialize the
default format at probe time. This improves consistency by using the
same code path for both default initialization and validation at
runtime, and allows dropping the now unused imx7_csi_find_pixel_format()
function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The driver unconditionally aligns the image width to multiples of 8
pixels. The real alignment constraint is 8 bytes, as indicated by the
CSI_IMAG_PARA.IMAGE_WIDTH documentation that calls for 8 pixel alignment
for 8bpp formats and 4 pixel alignment for other formats.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The driver doesn't currently support interlacing, but due to legacy
leftovers, it accepts values for the pixel format "field" field other
than V4L2_FIELD_NONE. Fix it by hardcoding V4L2_FIELD_NONE. Proper
interlacing support can be implemented later if desired.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
imx7_csi_mbus_fmt_to_pix_fmt
There is no need to convert input pixformat to mbus_framefmt and back
again. Instead apply pixformat width constrains directly.
Assign compose values before adjusting pixformat height/width.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This device only supports video capture, so bail out if invalid
selection type is passed.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
'field' is zero-initialized to V4L2_FIELD_ANY, which is an invalid value
to return to userspace. Instead default to non-interleaving.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The CSI requires a connected source subdev to operate. If
fwnode_graph_get_endpoint_by_id() fails and returns NULL, there is no
point in going on. Print an error message and abort instead.
Also we don't need to check for an existing asd. Any failure of
v4l2_async_nf_add_fwnode_remote() should abort the probe.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Use the V4L2 subdev active state API to store the active format. This
simplifies the driver not only by dropping the state stored in the
imx7_csi structure, but also by replacing the manual lock with the state
lock.
The is_streaming field is now protected by the active state lock, either
explicitly in .s_stream(), where the active state is locked manually, or
implicitly in .set_fmt(), which is called with the state locked.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon-kit
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The v4l2_subdev_format structure passed to the .get_fmt() subdev
operation in imx7_csi_video_validate_fmt() isn't zeroed, which can cause
undefined behaviour. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon-kit
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
It's good practice for functions to perform error cleanup internally
when they fail, in order to not leave the device in a half-initialized
state. Move the async notifier cleanup from the probe error path to the
imx7_csi_async_register(), and drop the v4l2_async_nf_unregister() call
as there is no error path after the async notifier gets registered.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon-kit
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The subdev core guarantees that the .set_fmt() operation is always
called with a valid pad. Drop the unneeded pad checks.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon-kit
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The .s_stream() and .link_validate() operations can't be called with a
NULL src_sd, as subdev nodes are not registered before the async
notifier completes. Remove the unneeded checks.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon-kit
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The .s_stream() operation is guaranteed not to be called to start/stop
an already started/stopped subdev. Remove the unneeded check.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon-kit
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The imx7_csi_video_init_format() function instantiates a
v4l2_subdev_format on the stack, to only use the .format field of that
structure. Replace it with a v4l2_mbus_framefmt instance.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon-kit
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The imx7_csi.cc field is set but never used. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon-kit
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
imx7_csi_init()
Add missing clk_disable_unprepare(), if imx7_csi_dma_setup() fails
in imx7_csi_init().
Fixes: ff43ca911978 ("media: imx: imx7-media-csi: Move CSI configuration before source start")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The imx7-media-csi driver, currently in staging, is ready for
prime-time. The staging TODO file lists a few items specific to that
driver, that are already addressed (the "all of the above" part) or can
be addressed later:
- The frame interval monitoring support is a software mechanism to
monitor the device for unexpected stalls, and should be part of the
V4L2 core if desired.
- Restricting the support media bus formats based on the SoC integration
only aims at reducing userspace confusion by not enumerating options
that are known not to be possible, it won't cause regressions if
handled later.
Move the description of the media bus format restriction TODO item to
the driver, drop the other TODO items, and move the driver out of
staging.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
