Merge Linus master into drm-next

The merge is clean, but the arm build fails afterwards,
due to API changes in the regulator tree.

I've included the patch into the merge to fix the build.

Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 43 insertions, 4 deletions

diff --git a/drivers/gpio/gpio-f7188x.c b/drivers/gpio/gpio-f7188x.c
index 1be291ac6319..dbda8433c4f7 100644
--- a/drivers/gpio/gpio-f7188x.c
+++ b/drivers/gpio/gpio-f7188x.c
@@ -1,5 +1,5 @@
 /*
- * GPIO driver for Fintek Super-I/O F71882 and F71889
+ * GPIO driver for Fintek Super-I/O F71869, F71869A, F71882 and F71889
  *
  * Copyright (C) 2010-2013 LaCie
  *
@@ -32,12 +32,16 @@
 #define SIO_LOCK_KEY		0xAA	/* Key to disable Super-I/O */
 
 #define SIO_FINTEK_ID		0x1934	/* Manufacturer ID */
+#define SIO_F71869_ID		0x0814	/* F71869 chipset ID */
+#define SIO_F71869A_ID		0x1007	/* F71869A chipset ID */
 #define SIO_F71882_ID		0x0541	/* F71882 chipset ID */
 #define SIO_F71889_ID		0x0909	/* F71889 chipset ID */
 
-enum chips { f71882fg, f71889f };
+enum chips { f71869, f71869a, f71882fg, f71889f };
 
 static const char * const f7188x_names[] = {
+	"f71869",
+	"f71869a",
 	"f71882fg",
 	"f71889f",
 };
@@ -146,6 +150,27 @@ static void f7188x_gpio_set(struct gpio_chip *chip, unsigned offset, int value);
 /* Output mode register (0:open drain 1:push-pull). */
 #define gpio_out_mode(base) (base + 3)
 
+static struct f7188x_gpio_bank f71869_gpio_bank[] = {
+	F7188X_GPIO_BANK(0, 6, 0xF0),
+	F7188X_GPIO_BANK(10, 8, 0xE0),
+	F7188X_GPIO_BANK(20, 8, 0xD0),
+	F7188X_GPIO_BANK(30, 8, 0xC0),
+	F7188X_GPIO_BANK(40, 8, 0xB0),
+	F7188X_GPIO_BANK(50, 5, 0xA0),
+	F7188X_GPIO_BANK(60, 6, 0x90),
+};
+
+static struct f7188x_gpio_bank f71869a_gpio_bank[] = {
+	F7188X_GPIO_BANK(0, 6, 0xF0),
+	F7188X_GPIO_BANK(10, 8, 0xE0),
+	F7188X_GPIO_BANK(20, 8, 0xD0),
+	F7188X_GPIO_BANK(30, 8, 0xC0),
+	F7188X_GPIO_BANK(40, 8, 0xB0),
+	F7188X_GPIO_BANK(50, 5, 0xA0),
+	F7188X_GPIO_BANK(60, 8, 0x90),
+	F7188X_GPIO_BANK(70, 8, 0x80),
+};
+
 static struct f7188x_gpio_bank f71882_gpio_bank[] = {
 	F7188X_GPIO_BANK(0 , 8, 0xF0),
 	F7188X_GPIO_BANK(10, 8, 0xE0),
@@ -281,6 +306,14 @@ static int f7188x_gpio_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	switch (sio->type) {
+	case f71869:
+		data->nr_bank = ARRAY_SIZE(f71869_gpio_bank);
+		data->bank = f71869_gpio_bank;
+		break;
+	case f71869a:
+		data->nr_bank = ARRAY_SIZE(f71869a_gpio_bank);
+		data->bank = f71869a_gpio_bank;
+		break;
 	case f71882fg:
 		data->nr_bank = ARRAY_SIZE(f71882_gpio_bank);
 		data->bank = f71882_gpio_bank;
@@ -354,6 +387,12 @@ static int __init f7188x_find(int addr, struct f7188x_sio *sio)
 
 	devid = superio_inw(addr, SIO_DEVID);
 	switch (devid) {
+	case SIO_F71869_ID:
+		sio->type = f71869;
+		break;
+	case SIO_F71869A_ID:
+		sio->type = f71869a;
+		break;
 	case SIO_F71882_ID:
 		sio->type = f71882fg;
 		break;
@@ -410,7 +449,7 @@ err:
 }
 
 /*
- * Try to match a supported Fintech device by reading the (hard-wired)
+ * Try to match a supported Fintek device by reading the (hard-wired)
  * configuration I/O ports. If available, then register both the platform
  * device and driver to support the GPIOs.
  */
@@ -450,6 +489,6 @@ static void __exit f7188x_gpio_exit(void)
 }
 module_exit(f7188x_gpio_exit);
 
-MODULE_DESCRIPTION("GPIO driver for Super-I/O chips F71882FG and F71889F");
+MODULE_DESCRIPTION("GPIO driver for Super-I/O chips F71869, F71869A, F71882FG and F71889F");
 MODULE_AUTHOR("Simon Guinot <simon.guinot@sequanux.org>");
 MODULE_LICENSE("GPL");