summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/ethernet/intel/Kconfig13
-rw-r--r--drivers/net/ethernet/intel/e1000e/82571.c2
-rw-r--r--drivers/net/ethernet/intel/e1000e/defines.h44
-rw-r--r--drivers/net/ethernet/intel/e1000e/e1000.h47
-rw-r--r--drivers/net/ethernet/intel/e1000e/ethtool.c159
-rw-r--r--drivers/net/ethernet/intel/e1000e/hw.h11
-rw-r--r--drivers/net/ethernet/intel/e1000e/ich8lan.c26
-rw-r--r--drivers/net/ethernet/intel/e1000e/netdev.c382
-rw-r--r--drivers/net/ethernet/intel/igb/Makefile2
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_82575.c140
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_82575.h17
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_defines.h13
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_hw.h20
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_regs.h16
-rw-r--r--drivers/net/ethernet/intel/igb/igb.h46
-rw-r--r--drivers/net/ethernet/intel/igb/igb_ethtool.c11
-rw-r--r--drivers/net/ethernet/intel/igb/igb_hwmon.c242
-rw-r--r--drivers/net/ethernet/intel/igb/igb_main.c632
-rw-r--r--drivers/net/ethernet/intel/igb/igb_ptp.c65
19 files changed, 1747 insertions, 141 deletions
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index bde4f3db328f..21353f0fef63 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -94,6 +94,8 @@ config IGB
tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
depends on PCI
select PTP_1588_CLOCK
+ select I2C
+ select I2C_ALGOBIT
---help---
This driver supports Intel(R) 82575/82576 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
@@ -112,6 +114,17 @@ config IGB
To compile this driver as a module, choose M here. The module
will be called igb.
+config IGB_HWMON
+ bool "Intel(R) PCI-Express Gigabit adapters HWMON support"
+ default y
+ depends on IGB && HWMON && !(IGB=y && HWMON=m)
+ ---help---
+ Say Y if you want to expose thermal sensor data on Intel devices.
+
+ Some of our devices contain thermal sensors, both external and internal.
+ This data is available via the hwmon sysfs interface and exposes
+ the onboard sensors.
+
config IGB_DCA
bool "Direct Cache Access (DCA) Support"
default y
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index c77d010d5c59..587890d2d55e 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -2044,6 +2044,7 @@ const struct e1000_info e1000_82574_info = {
| FLAG_HAS_MSIX
| FLAG_HAS_JUMBO_FRAMES
| FLAG_HAS_WOL
+ | FLAG_HAS_HW_TIMESTAMP
| FLAG_APME_IN_CTRL3
| FLAG_HAS_SMART_POWER_DOWN
| FLAG_HAS_AMT
@@ -2065,6 +2066,7 @@ const struct e1000_info e1000_82583_info = {
.mac = e1000_82583,
.flags = FLAG_HAS_HW_VLAN_FILTER
| FLAG_HAS_WOL
+ | FLAG_HAS_HW_TIMESTAMP
| FLAG_APME_IN_CTRL3
| FLAG_HAS_SMART_POWER_DOWN
| FLAG_HAS_AMT
diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index 7326ea2fef8f..36f9fad19a76 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -107,6 +107,7 @@
#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
+#define E1000_RXDEXT_STATERR_TST 0x00000100 /* Time Stamp taken */
#define E1000_RXDEXT_STATERR_CE 0x01000000
#define E1000_RXDEXT_STATERR_SE 0x02000000
#define E1000_RXDEXT_STATERR_SEQ 0x04000000
@@ -318,6 +319,7 @@
#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
+#define E1000_TXD_EXTCMD_TSTAMP 0x00000010 /* IEEE1588 Timestamp packet */
/* Transmit Control */
#define E1000_TCTL_EN 0x00000002 /* enable Tx */
@@ -383,6 +385,9 @@
#define E1000_KABGTXD_BGSQLBIAS 0x00050000
+/* Low Power IDLE Control */
+#define E1000_LPIC_LPIET_SHIFT 24 /* Low Power Idle Entry Time */
+
/* PBA constants */
#define E1000_PBA_8K 0x0008 /* 8KB */
#define E1000_PBA_16K 0x0010 /* 16KB */
@@ -533,6 +538,18 @@
#define E1000_RXCW_C 0x20000000 /* Receive config */
#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */
+#define E1000_TSYNCTXCTL_VALID 0x00000001 /* Tx timestamp valid */
+#define E1000_TSYNCRXCTL_TYPE_ALL 0x08
+#define E1000_TSYNCTXCTL_ENABLED 0x00000010 /* enable Tx timestamping */
+
+#define E1000_TSYNCRXCTL_VALID 0x00000001 /* Rx timestamp valid */
+#define E1000_TSYNCRXCTL_TYPE_MASK 0x0000000E /* Rx type mask */
+#define E1000_TSYNCRXCTL_ENABLED 0x00000010 /* enable Rx timestamping */
+#define E1000_TSYNCRXCTL_SYSCFI 0x00000020 /* Sys clock frequency */
+
+#define E1000_TIMINCA_INCPERIOD_SHIFT 24
+#define E1000_TIMINCA_INCVALUE_MASK 0x00FFFFFF
+
/* PCI Express Control */
#define E1000_GCR_RXD_NO_SNOOP 0x00000001
#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
@@ -799,6 +816,33 @@
/* BME1000 PHY Specific Control Register */
#define BME1000_PSCR_ENABLE_DOWNSHIFT 0x0800 /* 1 = enable downshift */
+/* PHY Low Power Idle Control */
+#define I82579_LPI_CTRL PHY_REG(772, 20)
+#define I82579_LPI_CTRL_100_ENABLE 0x2000
+#define I82579_LPI_CTRL_1000_ENABLE 0x4000
+#define I82579_LPI_CTRL_ENABLE_MASK 0x6000
+#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80
+
+/* Extended Management Interface (EMI) Registers */
+#define I82579_EMI_ADDR 0x10
+#define I82579_EMI_DATA 0x11
+#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */
+#define I82579_MSE_THRESHOLD 0x084F /* 82579 Mean Square Error Threshold */
+#define I82577_MSE_THRESHOLD 0x0887 /* 82577 Mean Square Error Threshold */
+#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */
+#define I82579_EEE_PCS_STATUS 0x182D /* IEEE MMD Register 3.1 >> 8 */
+#define I82579_EEE_CAPABILITY 0x0410 /* IEEE MMD Register 3.20 */
+#define I82579_EEE_ADVERTISEMENT 0x040E /* IEEE MMD Register 7.60 */
+#define I82579_EEE_LP_ABILITY 0x040F /* IEEE MMD Register 7.61 */
+#define I82579_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE supported */
+#define I82579_EEE_1000_SUPPORTED (1 << 2) /* 1000BaseTx EEE supported */
+#define I217_EEE_PCS_STATUS 0x9401 /* IEEE MMD Register 3.1 */
+#define I217_EEE_CAPABILITY 0x8000 /* IEEE MMD Register 3.20 */
+#define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */
+#define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */
+
+#define E1000_EEE_RX_LPI_RCVD 0x0400 /* Tx LP idle received */
+#define E1000_EEE_TX_LPI_RCVD 0x0800 /* Rx LP idle received */
#define PHY_PAGE_SHIFT 5
#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index 3f8bbc31795c..dea9e5552966 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -41,6 +41,8 @@
#include <linux/pci-aspm.h>
#include <linux/crc32.h>
#include <linux/if_vlan.h>
+#include <linux/clocksource.h>
+#include <linux/net_tstamp.h>
#include "hw.h"
@@ -353,6 +355,7 @@ struct e1000_adapter {
u64 gorc_old;
u32 alloc_rx_buff_failed;
u32 rx_dma_failed;
+ u32 rx_hwtstamp_cleared;
unsigned int rx_ps_pages;
u16 rx_ps_bsize0;
@@ -402,6 +405,14 @@ struct e1000_adapter {
u16 tx_ring_count;
u16 rx_ring_count;
+
+ struct hwtstamp_config hwtstamp_config;
+ struct delayed_work systim_overflow_work;
+ struct sk_buff *tx_hwtstamp_skb;
+ struct work_struct tx_hwtstamp_work;
+ spinlock_t systim_lock; /* protects SYSTIML/H regsters */
+ struct cyclecounter cc;
+ struct timecounter tc;
};
struct e1000_info {
@@ -416,6 +427,38 @@ struct e1000_info {
const struct e1000_nvm_operations *nvm_ops;
};
+/* The system time is maintained by a 64-bit counter comprised of the 32-bit
+ * SYSTIMH and SYSTIML registers. How the counter increments (and therefore
+ * its resolution) is based on the contents of the TIMINCA register - it
+ * increments every incperiod (bits 31:24) clock ticks by incvalue (bits 23:0).
+ * For the best accuracy, the incperiod should be as small as possible. The
+ * incvalue is scaled by a factor as large as possible (while still fitting
+ * in bits 23:0) so that relatively small clock corrections can be made.
+ *
+ * As a result, a shift of INCVALUE_SHIFT_n is used to fit a value of
+ * INCVALUE_n into the TIMINCA register allowing 32+8+(24-INCVALUE_SHIFT_n)
+ * bits to count nanoseconds leaving the rest for fractional nonseconds.
+ */
+#define INCVALUE_96MHz 125
+#define INCVALUE_SHIFT_96MHz 17
+#define INCPERIOD_SHIFT_96MHz 2
+#define INCPERIOD_96MHz (12 >> INCPERIOD_SHIFT_96MHz)
+
+#define INCVALUE_25MHz 40
+#define INCVALUE_SHIFT_25MHz 18
+#define INCPERIOD_25MHz 1
+
+/* Another drawback of scaling the incvalue by a large factor is the
+ * 64-bit SYSTIM register overflows more quickly. This is dealt with
+ * by simply reading the clock before it overflows.
+ *
+ * Clock ns bits Overflows after
+ * ~~~~~~ ~~~~~~~ ~~~~~~~~~~~~~~~
+ * 96MHz 47-bit 2^(47-INCPERIOD_SHIFT_96MHz) / 10^9 / 3600 = 9.77 hrs
+ * 25MHz 46-bit 2^46 / 10^9 / 3600 = 19.55 hours
+ */
+#define E1000_SYSTIM_OVERFLOW_PERIOD (HZ * 60 * 60 * 4)
+
/* hardware capability, feature, and workaround flags */
#define FLAG_HAS_AMT (1 << 0)
#define FLAG_HAS_FLASH (1 << 1)
@@ -431,7 +474,7 @@ struct e1000_info {
#define FLAG_HAS_SMART_POWER_DOWN (1 << 11)
#define FLAG_IS_QUAD_PORT_A (1 << 12)
#define FLAG_IS_QUAD_PORT (1 << 13)
-/* reserved bit14 */
+#define FLAG_HAS_HW_TIMESTAMP (1 << 14)
#define FLAG_APME_IN_WUC (1 << 15)
#define FLAG_APME_IN_CTRL3 (1 << 16)
#define FLAG_APME_CHECK_PORT_B (1 << 17)
@@ -463,6 +506,7 @@ struct e1000_info {
#define FLAG2_NO_DISABLE_RX (1 << 10)
#define FLAG2_PCIM2PCI_ARBITER_WA (1 << 11)
#define FLAG2_DFLT_CRC_STRIPPING (1 << 12)
+#define FLAG2_CHECK_RX_HWTSTAMP (1 << 13)
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
@@ -659,6 +703,7 @@ extern s32 e1000_check_polarity_ife(struct e1000_hw *hw);
extern s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw);
extern s32 e1000_check_polarity_igp(struct e1000_hw *hw);
extern bool e1000_check_phy_82574(struct e1000_hw *hw);
+extern s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data);
static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw)
{
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 2225603a8a28..f268cbcb751d 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -35,6 +35,7 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/vmalloc.h>
+#include <linux/mdio.h>
#include "e1000.h"
@@ -107,6 +108,7 @@ static const struct e1000_stats e1000_gstrings_stats[] = {
E1000_STAT("dropped_smbus", stats.mgpdc),
E1000_STAT("rx_dma_failed", rx_dma_failed),
E1000_STAT("tx_dma_failed", tx_dma_failed),
+ E1000_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared),
};
#define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats)
@@ -2050,6 +2052,159 @@ static int e1000_get_rxnfc(struct net_device *netdev,
}
}
+static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 cap_addr, adv_addr, lpa_addr, pcs_stat_addr, phy_data, lpi_ctrl;
+ u32 status, ret_val;
+
+ if (!(adapter->flags & FLAG_IS_ICH) ||
+ !(adapter->flags2 & FLAG2_HAS_EEE))
+ return -EOPNOTSUPP;
+
+ switch (hw->phy.type) {
+ case e1000_phy_82579:
+ cap_addr = I82579_EEE_CAPABILITY;
+ adv_addr = I82579_EEE_ADVERTISEMENT;
+ lpa_addr = I82579_EEE_LP_ABILITY;
+ pcs_stat_addr = I82579_EEE_PCS_STATUS;
+ break;
+ case e1000_phy_i217:
+ cap_addr = I217_EEE_CAPABILITY;
+ adv_addr = I217_EEE_ADVERTISEMENT;
+ lpa_addr = I217_EEE_LP_ABILITY;
+ pcs_stat_addr = I217_EEE_PCS_STATUS;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return -EBUSY;
+
+ /* EEE Capability */
+ ret_val = e1000_read_emi_reg_locked(hw, cap_addr, &phy_data);
+ if (ret_val)
+ goto release;
+ edata->supported = mmd_eee_cap_to_ethtool_sup_t(phy_data);
+
+ /* EEE Advertised */
+ ret_val = e1000_read_emi_reg_locked(hw, adv_addr, &phy_data);
+ if (ret_val)
+ goto release;
+ edata->advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data);
+
+ /* EEE Link Partner Advertised */
+ ret_val = e1000_read_emi_reg_locked(hw, lpa_addr, &phy_data);
+ if (ret_val)
+ goto release;
+ edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data);
+
+ /* EEE PCS Status */
+ ret_val = e1000_read_emi_reg_locked(hw, pcs_stat_addr, &phy_data);
+ if (hw->phy.type == e1000_phy_82579)
+ phy_data <<= 8;
+
+release:
+ hw->phy.ops.release(hw);
+ if (ret_val)
+ return -ENODATA;
+
+ e1e_rphy(hw, I82579_LPI_CTRL, &lpi_ctrl);
+ status = er32(STATUS);
+
+ /* Result of the EEE auto negotiation - there is no register that
+ * has the status of the EEE negotiation so do a best-guess based
+ * on whether both Tx and Rx LPI indications have been received or
+ * base it on the link speed, the EEE advertised speeds on both ends
+ * and the speeds on which EEE is enabled locally.
+ */
+ if (((phy_data & E1000_EEE_TX_LPI_RCVD) &&
+ (phy_data & E1000_EEE_RX_LPI_RCVD)) ||
+ ((status & E1000_STATUS_SPEED_100) &&
+ (edata->advertised & ADVERTISED_100baseT_Full) &&
+ (edata->lp_advertised & ADVERTISED_100baseT_Full) &&
+ (lpi_ctrl & I82579_LPI_CTRL_100_ENABLE)) ||
+ ((status & E1000_STATUS_SPEED_1000) &&
+ (edata->advertised & ADVERTISED_1000baseT_Full) &&
+ (edata->lp_advertised & ADVERTISED_1000baseT_Full) &&
+ (lpi_ctrl & I82579_LPI_CTRL_1000_ENABLE)))
+ edata->eee_active = true;
+
+ edata->eee_enabled = !hw->dev_spec.ich8lan.eee_disable;
+ edata->tx_lpi_enabled = true;
+ edata->tx_lpi_timer = er32(LPIC) >> E1000_LPIC_LPIET_SHIFT;
+
+ return 0;
+}
+
+static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct ethtool_eee eee_curr;
+ s32 ret_val;
+
+ if (!(adapter->flags & FLAG_IS_ICH) ||
+ !(adapter->flags2 & FLAG2_HAS_EEE))
+ return -EOPNOTSUPP;
+
+ ret_val = e1000e_get_eee(netdev, &eee_curr);
+ if (ret_val)
+ return ret_val;
+
+ if (eee_curr.advertised != edata->advertised) {
+ e_err("Setting EEE advertisement is not supported\n");
+ return -EINVAL;
+ }
+
+ if (eee_curr.tx_lpi_enabled != edata->tx_lpi_enabled) {
+ e_err("Setting EEE tx-lpi is not supported\n");
+ return -EINVAL;
+ }
+
+ if (eee_curr.tx_lpi_timer != edata->tx_lpi_timer) {
+ e_err("Setting EEE Tx LPI timer is not supported\n");
+ return -EINVAL;
+ }
+
+ if (hw->dev_spec.ich8lan.eee_disable != !edata->eee_enabled) {
+ hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled;
+
+ /* reset the link */
+ if (netif_running(netdev))
+ e1000e_reinit_locked(adapter);
+ else
+ e1000e_reset(adapter);
+ }
+
+ return 0;
+}
+
+static int e1000e_get_ts_info(struct net_device *netdev,
+ struct ethtool_ts_info *info)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ ethtool_op_get_ts_info(netdev, info);
+
+ if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP))
+ return 0;
+
+ info->so_timestamping |= (SOF_TIMESTAMPING_TX_HARDWARE |
+ SOF_TIMESTAMPING_RX_HARDWARE |
+ SOF_TIMESTAMPING_RAW_HARDWARE);
+
+ info->tx_types = (1 << HWTSTAMP_TX_OFF) | (1 << HWTSTAMP_TX_ON);
+
+ info->rx_filters = ((1 << HWTSTAMP_FILTER_NONE) |
+ (1 << HWTSTAMP_FILTER_ALL));
+
+ return 0;
+}
+
static const struct ethtool_ops e1000_ethtool_ops = {
.get_settings = e1000_get_settings,
.set_settings = e1000_set_settings,
@@ -2077,7 +2232,9 @@ static const struct ethtool_ops e1000_ethtool_ops = {
.get_coalesce = e1000_get_coalesce,
.set_coalesce = e1000_set_coalesce,
.get_rxnfc = e1000_get_rxnfc,
- .get_ts_info = ethtool_op_get_ts_info,
+ .get_ts_info = e1000e_get_ts_info,
+ .get_eee = e1000e_get_eee,
+ .set_eee = e1000e_set_eee,
};
void e1000e_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h
index 06239fe47db1..8e7e80345a60 100644
--- a/drivers/net/ethernet/intel/e1000e/hw.h
+++ b/drivers/net/ethernet/intel/e1000e/hw.h
@@ -60,8 +60,10 @@ enum e1e_registers {
E1000_EIAC_82574 = 0x000DC, /* Ext. Interrupt Auto Clear - RW */
E1000_IAM = 0x000E0, /* Interrupt Acknowledge Auto Mask */
E1000_IVAR = 0x000E4, /* Interrupt Vector Allocation - RW */
+ E1000_FEXTNVM7 = 0x000E4, /* Future Extended NVM 7 - RW */
E1000_EITR_82574_BASE = 0x000E8, /* Interrupt Throttling - RW */
#define E1000_EITR_82574(_n) (E1000_EITR_82574_BASE + (_n << 2))
+ E1000_LPIC = 0x000FC, /* Low Power Idle Control - RW */
E1000_RCTL = 0x00100, /* Rx Control - RW */
E1000_FCTTV = 0x00170, /* Flow Control Transmit Timer Value - RW */
E1000_TXCW = 0x00178, /* Tx Configuration Word - RW */
@@ -240,6 +242,15 @@ enum e1e_registers {
#define E1000_PCH_RAICC(_n) (E1000_PCH_RAICC_BASE + ((_n) * 4))
#define E1000_CRC_OFFSET E1000_PCH_RAICC_BASE
E1000_HICR = 0x08F00, /* Host Interface Control */
+ E1000_SYSTIML = 0x0B600, /* System time register Low - RO */
+ E1000_SYSTIMH = 0x0B604, /* System time register High - RO */
+ E1000_TIMINCA = 0x0B608, /* Increment attributes register - RW */
+ E1000_TSYNCTXCTL = 0x0B614, /* Tx Time Sync Control register - RW */
+ E1000_TXSTMPL = 0x0B618, /* Tx timestamp value Low - RO */
+ E1000_TXSTMPH = 0x0B61C, /* Tx timestamp value High - RO */
+ E1000_TSYNCRXCTL = 0x0B620, /* Rx Time Sync Control register - RW */
+ E1000_RXSTMPL = 0x0B624, /* Rx timestamp Low - RO */
+ E1000_RXSTMPH = 0x0B628, /* Rx timestamp High - RO */
};
#define E1000_MAX_PHY_ADDR 4
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 051dfda75fc0..50935ef48171 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -148,28 +148,6 @@
#define HV_PM_CTRL PHY_REG(770, 17)
#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA 0x100
-/* PHY Low Power Idle Control */
-#define I82579_LPI_CTRL PHY_REG(772, 20)
-#define I82579_LPI_CTRL_100_ENABLE 0x2000
-#define I82579_LPI_CTRL_1000_ENABLE 0x4000
-#define I82579_LPI_CTRL_ENABLE_MASK 0x6000
-#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80
-
-/* Extended Management Interface (EMI) Registers */
-#define I82579_EMI_ADDR 0x10
-#define I82579_EMI_DATA 0x11
-#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */
-#define I82579_MSE_THRESHOLD 0x084F /* 82579 Mean Square Error Threshold */
-#define I82577_MSE_THRESHOLD 0x0887 /* 82577 Mean Square Error Threshold */
-#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */
-#define I82579_EEE_PCS_STATUS 0x182D /* IEEE MMD Register 3.1 >> 8 */
-#define I82579_EEE_LP_ABILITY 0x040F /* IEEE MMD Register 7.61 */
-#define I82579_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE supported */
-#define I82579_EEE_1000_SUPPORTED (1 << 2) /* 1000BaseTx EEE supported */
-#define I217_EEE_PCS_STATUS 0x9401 /* IEEE MMD Register 3.1 */
-#define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */
-#define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */
-
/* Intel Rapid Start Technology Support */
#define I217_PROXY_CTRL BM_PHY_REG(BM_WUC_PAGE, 70)
#define I217_PROXY_CTRL_AUTO_DISABLE 0x0080
@@ -829,7 +807,7 @@ static s32 __e1000_access_emi_reg_locked(struct e1000_hw *hw, u16 address,
*
* Assumes the SW/FW/HW Semaphore is already acquired.
**/
-static s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data)
+s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data)
{
return __e1000_access_emi_reg_locked(hw, addr, data, true);
}
@@ -4623,6 +4601,7 @@ const struct e1000_info e1000_pch2_info = {
.mac = e1000_pch2lan,
.flags = FLAG_IS_ICH
| FLAG_HAS_WOL
+ | FLAG_HAS_HW_TIMESTAMP
| FLAG_HAS_CTRLEXT_ON_LOAD
| FLAG_HAS_AMT
| FLAG_HAS_FLASH
@@ -4642,6 +4621,7 @@ const struct e1000_info e1000_pch_lpt_info = {
.mac = e1000_pch_lpt,
.flags = FLAG_IS_ICH
| FLAG_HAS_WOL
+ | FLAG_HAS_HW_TIMESTAMP
| FLAG_HAS_CTRLEXT_ON_LOAD
| FLAG_HAS_AMT
| FLAG_HAS_FLASH
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 05538e66c809..c15b7e438a44 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -488,20 +488,87 @@ static int e1000_desc_unused(struct e1000_ring *ring)
}
/**
+ * e1000e_systim_to_hwtstamp - convert system time value to hw time stamp
+ * @adapter: board private structure
+ * @hwtstamps: time stamp structure to update
+ * @systim: unsigned 64bit system time value.
+ *
+ * Convert the system time value stored in the RX/TXSTMP registers into a
+ * hwtstamp which can be used by the upper level time stamping functions.
+ *
+ * The 'systim_lock' spinlock is used to protect the consistency of the
+ * system time value. This is needed because reading the 64 bit time
+ * value involves reading two 32 bit registers. The first read latches the
+ * value.
+ **/
+static void e1000e_systim_to_hwtstamp(struct e1000_adapter *adapter,
+ struct skb_shared_hwtstamps *hwtstamps,
+ u64 systim)
+{
+ u64 ns;
+ unsigned long flags;
+
+ spin_lock_irqsave(&adapter->systim_lock, flags);
+ ns = timecounter_cyc2time(&adapter->tc, systim);
+ spin_unlock_irqrestore(&adapter->systim_lock, flags);
+
+ memset(hwtstamps, 0, sizeof(*hwtstamps));
+ hwtstamps->hwtstamp = ns_to_ktime(ns);
+}
+
+/**
+ * e1000e_rx_hwtstamp - utility function which checks for Rx time stamp
+ * @adapter: board private structure
+ * @status: descriptor extended error and status field
+ * @skb: particular skb to include time stamp
+ *
+ * If the time stamp is valid, convert it into the timecounter ns value
+ * and store that result into the shhwtstamps structure which is passed
+ * up the network stack.
+ **/
+static void e1000e_rx_hwtstamp(struct e1000_adapter *adapter, u32 status,
+ struct sk_buff *skb)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u64 rxstmp;
+
+ if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP) ||
+ !(status & E1000_RXDEXT_STATERR_TST) ||
+ !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID))
+ return;
+
+ /* The Rx time stamp registers contain the time stamp. No other
+ * received packet will be time stamped until the Rx time stamp
+ * registers are read. Because only one packet can be time stamped
+ * at a time, the register values must belong to this packet and
+ * therefore none of the other additional attributes need to be
+ * compared.
+ */
+ rxstmp = (u64)er32(RXSTMPL);
+ rxstmp |= (u64)er32(RXSTMPH) << 32;
+ e1000e_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), rxstmp);
+
+ adapter->flags2 &= ~FLAG2_CHECK_RX_HWTSTAMP;
+}
+
+/**
* e1000_receive_skb - helper function to handle Rx indications
* @adapter: board private structure
- * @status: descriptor status field as written by hardware
+ * @staterr: descriptor extended error and status field as written by hardware
* @vlan: descriptor vlan field as written by hardware (no le/be conversion)
* @skb: pointer to sk_buff to be indicated to stack
**/
static void e1000_receive_skb(struct e1000_adapter *adapter,
struct net_device *netdev, struct sk_buff *skb,
- u8 status, __le16 vlan)
+ u32 staterr, __le16 vlan)
{
u16 tag = le16_to_cpu(vlan);
+
+ e1000e_rx_hwtstamp(adapter, staterr, skb);
+
skb->protocol = eth_type_trans(skb, netdev);
- if (status & E1000_RXD_STAT_VP)
+ if (staterr & E1000_RXD_STAT_VP)
__vlan_hwaccel_put_tag(skb, tag);
napi_gro_receive(&adapter->napi, skb);
@@ -1092,6 +1159,41 @@ static void e1000_print_hw_hang(struct work_struct *work)
}
/**
+ * e1000e_tx_hwtstamp_work - check for Tx time stamp
+ * @work: pointer to work struct
+ *
+ * This work function polls the TSYNCTXCTL valid bit to determine when a
+ * timestamp has been taken for the current stored skb. The timestamp must
+ * be for this skb because only one such packet is allowed in the queue.
+ */
+static void e1000e_tx_hwtstamp_work(struct work_struct *work)
+{
+ struct e1000_adapter *adapter = container_of(work, struct e1000_adapter,
+ tx_hwtstamp_work);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (!adapter->tx_hwtstamp_skb)
+ return;
+
+ if (er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID) {
+ struct skb_shared_hwtstamps shhwtstamps;
+ u64 txstmp;
+
+ txstmp = er32(TXSTMPL);
+ txstmp |= (u64)er32(TXSTMPH) << 32;
+
+ e1000e_systim_to_hwtstamp(adapter, &shhwtstamps, txstmp);
+
+ skb_tstamp_tx(adapter->tx_hwtstamp_skb, &shhwtstamps);
+ dev_kfree_skb_any(adapter->tx_hwtstamp_skb);
+ adapter->tx_hwtstamp_skb = NULL;
+ } else {
+ /* reschedule to check later */
+ schedule_work(&adapter->tx_hwtstamp_work);
+ }
+}
+
+/**
* e1000_clean_tx_irq - Reclaim resources after transmit completes
* @tx_ring: Tx descriptor ring
*
@@ -1345,8 +1447,8 @@ copydone:
cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
adapter->rx_hdr_split++;
- e1000_receive_skb(adapter, netdev, skb,
- staterr, rx_desc->wb.middle.vlan);
+ e1000_receive_skb(adapter, netdev, skb, staterr,
+ rx_desc->wb.middle.vlan);
next_desc:
rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
@@ -3304,6 +3406,159 @@ static void e1000e_setup_rss_hash(struct e1000_adapter *adapter)
}
/**
+ * e1000e_get_base_timinca - get default SYSTIM time increment attributes
+ * @adapter: board private structure
+ * @timinca: pointer to returned time increment attributes
+ *
+ * Get attributes for incrementing the System Time Register SYSTIML/H at
+ * the default base frequency, and set the cyclecounter shift value.
+ **/
+static s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 incvalue, incperiod, shift;
+
+ /* Make sure clock is enabled on I217 before checking the frequency */
+ if ((hw->mac.type == e1000_pch_lpt) &&
+ !(er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) &&
+ !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_ENABLED)) {
+ u32 fextnvm7 = er32(FEXTNVM7);
+
+ if (!(fextnvm7 & (1 << 0))) {
+ ew32(FEXTNVM7, fextnvm7 | (1 << 0));
+ e1e_flush();
+ }
+ }
+
+ switch (hw->mac.type) {
+ case e1000_pch2lan:
+ case e1000_pch_lpt:
+ /* On I217, the clock frequency is 25MHz or 96MHz as
+ * indicated by the System Clock Frequency Indication
+ */
+ if ((hw->mac.type != e1000_pch_lpt) ||
+ (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) {
+ /* Stable 96MHz frequency */
+ incperiod = INCPERIOD_96MHz;
+ incvalue = INCVALUE_96MHz;
+ shift = INCVALUE_SHIFT_96MHz;
+ adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHz;
+ break;
+ }
+ /* fall-through */
+ case e1000_82574:
+ case e1000_82583:
+ /* Stable 25MHz frequency */
+ incperiod = INCPERIOD_25MHz;
+ incvalue = INCVALUE_25MHz;
+ shift = INCVALUE_SHIFT_25MHz;
+ adapter->cc.shift = shift;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ *timinca = ((incperiod << E1000_TIMINCA_INCPERIOD_SHIFT) |
+ ((incvalue << shift) & E1000_TIMINCA_INCVALUE_MASK));
+
+ return 0;
+}
+
+/**
+ * e1000e_config_hwtstamp - configure the hwtstamp registers and enable/disable
+ * @adapter: board private structure
+ *
+ * Outgoing time stamping can be enabled and disabled. Play nice and
+ * disable it when requested, although it shouldn't cause any overhead
+ * when no packet needs it. At most one packet in the queue may be
+ * marked for time stamping, otherwise it would be impossible to tell
+ * for sure to which packet the hardware time stamp belongs.
+ *
+ * Incoming time stamping has to be configured via the hardware filters.
+ * Not all combinations are supported, in particular event type has to be
+ * specified. Matching the kind of event packet is not supported, with the
+ * exception of "all V2 events regardless of level 2 or 4".
+ **/
+static int e1000e_config_hwtstamp(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct hwtstamp_config *config = &adapter->hwtstamp_config;
+ u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED;
+ u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
+ u32 regval;
+ s32 ret_val;
+
+ if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP))
+ return -EINVAL;
+
+ /* flags reserved for future extensions - must be zero */
+ if (config->flags)
+ return -EINVAL;
+
+ switch (config->tx_type) {
+ case HWTSTAMP_TX_OFF:
+ tsync_tx_ctl = 0;
+ break;
+ case HWTSTAMP_TX_ON:
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ switch (config->rx_filter) {
+ case HWTSTAMP_FILTER_NONE:
+ tsync_rx_ctl = 0;
+ break;
+ case HWTSTAMP_FILTER_ALL:
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
+ config->rx_filter = HWTSTAMP_FILTER_ALL;
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ /* enable/disable Tx h/w time stamping */
+ regval = er32(TSYNCTXCTL);
+ regval &= ~E1000_TSYNCTXCTL_ENABLED;
+ regval |= tsync_tx_ctl;
+ ew32(TSYNCTXCTL, regval);
+ if ((er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) !=
+ (regval & E1000_TSYNCTXCTL_ENABLED)) {
+ e_err("Timesync Tx Control register not set as expected\n");
+ return -EAGAIN;
+ }
+
+ /* enable/disable Rx h/w time stamping */
+ regval = er32(TSYNCRXCTL);
+ regval &= ~(E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK);
+ regval |= tsync_rx_ctl;
+ ew32(TSYNCRXCTL, regval);
+ if ((er32(TSYNCRXCTL) & (E1000_TSYNCRXCTL_ENABLED |
+ E1000_TSYNCRXCTL_TYPE_MASK)) !=
+ (regval & (E1000_TSYNCRXCTL_ENABLED |
+ E1000_TSYNCRXCTL_TYPE_MASK))) {
+ e_err("Timesync Rx Control register not set as expected\n");
+ return -EAGAIN;
+ }
+
+ /* Clear TSYNCRXCTL_VALID & TSYNCTXCTL_VALID bit */
+ regval = er32(RXSTMPH);
+ regval = er32(TXSTMPH);
+
+ /* Get and set the System Time Register SYSTIM base frequency */
+ ret_val = e1000e_get_base_timinca(adapter, &regval);
+ if (ret_val)
+ return ret_val;
+ ew32(TIMINCA, regval);
+
+ /* reset the ns time counter */
+ timecounter_init(&adapter->tc, &adapter->cc,
+ ktime_to_ns(ktime_get_real()));
+
+ return 0;
+}
+
+/**
* e1000_configure - configure the hardware for Rx and Tx
* @adapter: private board structure
**/
@@ -3529,6 +3784,9 @@ void e1000e_reset(struct e1000_adapter *adapter)
e1000e_reset_adaptive(hw);
+ /* initialize systim and reset the ns time counter */
+ e1000e_config_hwtstamp(adapter);
+
if (!netif_running(adapter->netdev) &&
!test_bit(__E1000_TESTING, &adapter->state)) {
e1000_power_down_phy(adapter);
@@ -3665,6 +3923,24 @@ void e1000e_reinit_locked(struct e1000_adapter *adapter)
}
/**
+ * e1000e_cyclecounter_read - read raw cycle counter (used by time counter)
+ * @cc: cyclecounter structure
+ **/
+static cycle_t e1000e_cyclecounter_read(const struct cyclecounter *cc)
+{
+ struct e1000_adapter *adapter = container_of(cc, struct e1000_adapter,
+ cc);
+ struct e1000_hw *hw = &adapter->hw;
+ cycle_t systim;
+
+ /* latch SYSTIMH on read of SYSTIML */
+ systim = (cycle_t)er32(SYSTIML);
+ systim |= (cycle_t)er32(SYSTIMH) << 32;
+
+ return systim;
+}
+
+/**
* e1000_sw_init - Initialize general software structures (struct e1000_adapter)
* @adapter: board private structure to initialize
*
@@ -3690,6 +3966,17 @@ static int e1000_sw_init(struct e1000_adapter *adapter)
if (e1000_alloc_queues(adapter))
return -ENOMEM;
+ /* Setup hardware time stamping cyclecounter */
+ if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) {
+ adapter->cc.read = e1000e_cyclecounter_read;
+ adapter->cc.mask = CLOCKSOURCE_MASK(64);
+ adapter->cc.mult = 1;
+ /* cc.shift set in e1000e_get_base_tininca() */
+
+ spin_lock_init(&adapter->systim_lock);
+ INIT_WORK(&adapter->tx_hwtstamp_work, e1000e_tx_hwtstamp_work);
+ }
+
/* Explicitly disable IRQ since the NIC can be in any state. */
e1000_irq_disable(adapter);
@@ -4597,6 +4884,17 @@ link_up:
if (adapter->flags2 & FLAG2_CHECK_PHY_HANG)
e1000e_check_82574_phy_workaround(adapter);
+ /* Clear valid timestamp stuck in RXSTMPL/H due to a Rx error */
+ if (adapter->hwtstamp_config.rx_filter != HWTSTAMP_FILTER_NONE) {
+ if ((adapter->flags2 & FLAG2_CHECK_RX_HWTSTAMP) &&
+ (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID)) {
+ er32(RXSTMPH);
+ adapter->rx_hwtstamp_cleared++;
+ } else {
+ adapter->flags2 |= FLAG2_CHECK_RX_HWTSTAMP;
+ }
+ }
+
/* Reset the timer */
if (!test_bit(__E1000_DOWN, &adapter->state))
mod_timer(&adapter->watchdog_timer,
@@ -4608,6 +4906,7 @@ link_up:
#define E1000_TX_FLAGS_TSO 0x00000004
#define E1000_TX_FLAGS_IPV4 0x00000008
#define E1000_TX_FLAGS_NO_FCS 0x00000010
+#define E1000_TX_FLAGS_HWTSTAMP 0x00000020
#define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
#define E1000_TX_FLAGS_VLAN_SHIFT 16
@@ -4866,6 +5165,11 @@ static void e1000_tx_queue(struct e1000_ring *tx_ring, int tx_flags, int count)
if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS))
txd_lower &= ~(E1000_TXD_CMD_IFCS);
+ if (unlikely(tx_flags & E1000_TX_FLAGS_HWTSTAMP)) {
+ txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
+ txd_upper |= E1000_TXD_EXTCMD_TSTAMP;
+ }
+
i = tx_ring->next_to_use;
do {
@@ -5089,7 +5393,15 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
count = e1000_tx_map(tx_ring, skb, first, adapter->tx_fifo_limit,
nr_frags);
if (count) {
- skb_tx_timestamp(skb);
+ if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+ !adapter->tx_hwtstamp_skb)) {
+ skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+ tx_flags |= E1000_TX_FLAGS_HWTSTAMP;
+ adapter->tx_hwtstamp_skb = skb_get(skb);
+ schedule_work(&adapter->tx_hwtstamp_work);
+ } else {
+ skb_tx_timestamp(skb);
+ }
netdev_sent_queue(netdev, skb->len);
e1000_tx_queue(tx_ring, tx_flags, count);
@@ -5317,6 +5629,43 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
return 0;
}
+/**
+ * e1000e_hwtstamp_ioctl - control hardware time stamping
+ * @netdev: network interface device structure
+ * @ifreq: interface request
+ *
+ * Outgoing time stamping can be enabled and disabled. Play nice and
+ * disable it when requested, although it shouldn't cause any overhead
+ * when no packet needs it. At most one packet in the queue may be
+ * marked for time stamping, otherwise it would be impossible to tell
+ * for sure to which packet the hardware time stamp belongs.
+ *
+ * Incoming time stamping has to be configured via the hardware filters.
+ * Not all combinations are supported, in particular event type has to be
+ * specified. Matching the kind of event packet is not supported, with the
+ * exception of "all V2 events regardless of level 2 or 4".
+ **/
+static int e1000e_hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct hwtstamp_config config;
+ int ret_val;
+
+ if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
+ return -EFAULT;
+
+ adapter->hwtstamp_config = config;
+
+ ret_val = e1000e_config_hwtstamp(adapter);
+ if (ret_val)
+ return ret_val;
+
+ config = adapter->hwtstamp_config;
+
+ return copy_to_user(ifr->ifr_data, &config,
+ sizeof(config)) ? -EFAULT : 0;
+}
+
static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
{
switch (cmd) {
@@ -5324,6 +5673,8 @@ static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
case SIOCGMIIREG:
case SIOCSMIIREG:
return e1000_mii_ioctl(netdev, ifr, cmd);
+ case SIOCSHWTSTAMP:
+ return e1000e_hwtstamp_ioctl(netdev, ifr);
default:
return -EOPNOTSUPP;
}
@@ -5548,14 +5899,21 @@ static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
#else
static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
{
+ u16 aspm_ctl = 0;
+
+ if (state & PCIE_LINK_STATE_L0S)
+ aspm_ctl |= PCI_EXP_LNKCTL_ASPM_L0S;
+ if (state & PCIE_LINK_STATE_L1)
+ aspm_ctl |= PCI_EXP_LNKCTL_ASPM_L1;
+
/* Both device and parent should have the same ASPM setting.
* Disable ASPM in downstream component first and then upstream.
*/
- pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, state);
+ pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, aspm_ctl);
if (pdev->bus->self)
pcie_capability_clear_word(pdev->bus->self, PCI_EXP_LNKCTL,
- state);
+ aspm_ctl);
}
#endif
static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
@@ -6373,6 +6731,14 @@ static void e1000_remove(struct pci_dev *pdev)
cancel_work_sync(&adapter->update_phy_task);
cancel_work_sync(&adapter->print_hang_task);
+ if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) {
+ cancel_work_sync(&adapter->tx_hwtstamp_work);
+ if (adapter->tx_hwtstamp_skb) {
+ dev_kfree_skb_any(adapter->tx_hwtstamp_skb);
+ adapter->tx_hwtstamp_skb = NULL;
+ }
+ }
+
if (!(netdev->flags & IFF_UP))
e1000_power_down_phy(adapter);
diff --git a/drivers/net/ethernet/intel/igb/Makefile b/drivers/net/ethernet/intel/igb/Makefile
index 624476cfa727..f9d37c809885 100644
--- a/drivers/net/ethernet/intel/igb/Makefile
+++ b/drivers/net/ethernet/intel/igb/Makefile
@@ -34,4 +34,4 @@ obj-$(CONFIG_IGB) += igb.o
igb-objs := igb_main.o igb_ethtool.o e1000_82575.o \
e1000_mac.o e1000_nvm.o e1000_phy.o e1000_mbx.o \
- e1000_i210.o igb_ptp.o
+ e1000_i210.o igb_ptp.o igb_hwmon.o
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index fdaaf2709d0a..b6ec782156bb 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -33,6 +33,7 @@
#include <linux/types.h>
#include <linux/if_ether.h>
+#include <linux/i2c.h>
#include "e1000_mac.h"
#include "e1000_82575.h"
@@ -2302,18 +2303,157 @@ out:
return ret_val;
}
+static const u8 e1000_emc_temp_data[4] = {
+ E1000_EMC_INTERNAL_DATA,
+ E1000_EMC_DIODE1_DATA,
+ E1000_EMC_DIODE2_DATA,
+ E1000_EMC_DIODE3_DATA
+};
+static const u8 e1000_emc_therm_limit[4] = {
+ E1000_EMC_INTERNAL_THERM_LIMIT,
+ E1000_EMC_DIODE1_THERM_LIMIT,
+ E1000_EMC_DIODE2_THERM_LIMIT,
+ E1000_EMC_DIODE3_THERM_LIMIT
+};
+
+/* igb_get_thermal_sensor_data_generic - Gathers thermal sensor data
+ * @hw: pointer to hardware structure
+ *
+ * Updates the temperatures in mac.thermal_sensor_data
+ */
+s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw)
+{
+ s32 status = E1000_SUCCESS;
+ u16 ets_offset;
+ u16 ets_cfg;
+ u16 ets_sensor;
+ u8 num_sensors;
+ u8 sensor_index;
+ u8 sensor_location;
+ u8 i;
+ struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+ if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0))
+ return E1000_NOT_IMPLEMENTED;
+
+ data->sensor[0].temp = (rd32(E1000_THMJT) & 0xFF);
+
+ /* Return the internal sensor only if ETS is unsupported */
+ hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset);
+ if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF))
+ return status;
+
+ hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg);
+ if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT)
+ != NVM_ETS_TYPE_EMC)
+ return E1000_NOT_IMPLEMENTED;
+
+ num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK);
+ if (num_sensors > E1000_MAX_SENSORS)
+ num_sensors = E1000_MAX_SENSORS;
+
+ for (i = 1; i < num_sensors; i++) {
+ hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor);
+ sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >>
+ NVM_ETS_DATA_INDEX_SHIFT);
+ sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >>
+ NVM_ETS_DATA_LOC_SHIFT);
+
+ if (sensor_location != 0)
+ hw->phy.ops.read_i2c_byte(hw,
+ e1000_emc_temp_data[sensor_index],
+ E1000_I2C_THERMAL_SENSOR_ADDR,
+ &data->sensor[i].temp);
+ }
+ return status;
+}
+
+/* igb_init_thermal_sensor_thresh_generic - Sets thermal sensor thresholds
+ * @hw: pointer to hardware structure
+ *
+ * Sets the thermal sensor thresholds according to the NVM map
+ * and save off the threshold and location values into mac.thermal_sensor_data
+ */
+s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *hw)
+{
+ s32 status = E1000_SUCCESS;
+ u16 ets_offset;
+ u16 ets_cfg;
+ u16 ets_sensor;
+ u8 low_thresh_delta;
+ u8 num_sensors;
+ u8 sensor_index;
+ u8 sensor_location;
+ u8 therm_limit;
+ u8 i;
+ struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+ if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0))
+ return E1000_NOT_IMPLEMENTED;
+
+ memset(data, 0, sizeof(struct e1000_thermal_sensor_data));
+
+ data->sensor[0].location = 0x1;
+ data->sensor[0].caution_thresh =
+ (rd32(E1000_THHIGHTC) & 0xFF);
+ data->sensor[0].max_op_thresh =
+ (rd32(E1000_THLOWTC) & 0xFF);
+
+ /* Return the internal sensor only if ETS is unsupported */
+ hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset);
+ if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF))
+ return status;
+
+ hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg);
+ if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT)
+ != NVM_ETS_TYPE_EMC)
+ return E1000_NOT_IMPLEMENTED;
+
+ low_thresh_delta = ((ets_cfg & NVM_ETS_LTHRES_DELTA_MASK) >>
+ NVM_ETS_LTHRES_DELTA_SHIFT);
+ num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK);
+
+ for (i = 1; i <= num_sensors; i++) {
+ hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor);
+ sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >>
+ NVM_ETS_DATA_INDEX_SHIFT);
+ sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >>
+ NVM_ETS_DATA_LOC_SHIFT);
+ therm_limit = ets_sensor & NVM_ETS_DATA_HTHRESH_MASK;
+
+ hw->phy.ops.write_i2c_byte(hw,
+ e1000_emc_therm_limit[sensor_index],
+ E1000_I2C_THERMAL_SENSOR_ADDR,
+ therm_limit);
+
+ if ((i < E1000_MAX_SENSORS) && (sensor_location != 0)) {
+ data->sensor[i].location = sensor_location;
+ data->sensor[i].caution_thresh = therm_limit;
+ data->sensor[i].max_op_thresh = therm_limit -
+ low_thresh_delta;
+ }
+ }
+ return status;
+}
+
static struct e1000_mac_operations e1000_mac_ops_82575 = {
.init_hw = igb_init_hw_82575,
.check_for_link = igb_check_for_link_82575,
.rar_set = igb_rar_set,
.read_mac_addr = igb_read_mac_addr_82575,
.get_speed_and_duplex = igb_get_speed_and_duplex_copper,
+#ifdef CONFIG_IGB_HWMON
+ .get_thermal_sensor_data = igb_get_thermal_sensor_data_generic,
+ .init_thermal_sensor_thresh = igb_init_thermal_sensor_thresh_generic,
+#endif
};
static struct e1000_phy_operations e1000_phy_ops_82575 = {
.acquire = igb_acquire_phy_82575,
.get_cfg_done = igb_get_cfg_done_82575,
.release = igb_release_phy_82575,
+ .write_i2c_byte = igb_write_i2c_byte,
+ .read_i2c_byte = igb_read_i2c_byte,
};
static struct e1000_nvm_operations e1000_nvm_ops_82575 = {
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h
index 44b76b3b6816..444f6f521da7 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.h
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.h
@@ -32,6 +32,10 @@ extern void igb_shutdown_serdes_link_82575(struct e1000_hw *hw);
extern void igb_power_up_serdes_link_82575(struct e1000_hw *hw);
extern void igb_power_down_phy_copper_82575(struct e1000_hw *hw);
extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw);
+extern s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data);
+extern s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data);
#define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \
(ID_LED_DEF1_DEF2 << 8) | \
@@ -260,5 +264,16 @@ void igb_vmdq_set_loopback_pf(struct e1000_hw *, bool);
void igb_vmdq_set_replication_pf(struct e1000_hw *, bool);
u16 igb_rxpbs_adjust_82580(u32 data);
s32 igb_set_eee_i350(struct e1000_hw *);
-
+s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *);
+s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw);
+
+#define E1000_I2C_THERMAL_SENSOR_ADDR 0xF8
+#define E1000_EMC_INTERNAL_DATA 0x00
+#define E1000_EMC_INTERNAL_THERM_LIMIT 0x20
+#define E1000_EMC_DIODE1_DATA 0x01
+#define E1000_EMC_DIODE1_THERM_LIMIT 0x19
+#define E1000_EMC_DIODE2_DATA 0x23
+#define E1000_EMC_DIODE2_THERM_LIMIT 0x1A
+#define E1000_EMC_DIODE3_DATA 0x2A
+#define E1000_EMC_DIODE3_THERM_LIMIT 0x30
#endif
diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index 45dce06eff26..9b7ef93efd79 100644
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -470,6 +470,7 @@
#define E1000_ERR_NO_SPACE 17
#define E1000_ERR_NVM_PBA_SECTION 18
#define E1000_ERR_INVM_VALUE_NOT_FOUND 19
+#define E1000_ERR_I2C 20
/* Loop limit on how long we wait for auto-negotiation to complete */
#define COPPER_LINK_UP_LIMIT 10
@@ -674,6 +675,18 @@
#define NVM_COMB_VER_SHFT 8
#define NVM_VER_INVALID 0xFFFF
#define NVM_ETRACK_SHIFT 16
+#define NVM_ETS_CFG 0x003E
+#define NVM_ETS_LTHRES_DELTA_MASK 0x07C0
+#define NVM_ETS_LTHRES_DELTA_SHIFT 6
+#define NVM_ETS_TYPE_MASK 0x0038
+#define NVM_ETS_TYPE_SHIFT 3
+#define NVM_ETS_TYPE_EMC 0x000
+#define NVM_ETS_NUM_SENSORS_MASK 0x0007
+#define NVM_ETS_DATA_LOC_MASK 0x3C00
+#define NVM_ETS_DATA_LOC_SHIFT 10
+#define NVM_ETS_DATA_INDEX_MASK 0x0300
+#define NVM_ETS_DATA_INDEX_SHIFT 8
+#define NVM_ETS_DATA_HTHRESH_MASK 0x00FF
#define E1000_NVM_CFG_DONE_PORT_0 0x040000 /* MNG config cycle done */
#define E1000_NVM_CFG_DONE_PORT_1 0x080000 /* ...for second port */
diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h
index c2a51dcda550..2c9b6f40e21c 100644
--- a/drivers/net/ethernet/intel/igb/e1000_hw.h
+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
@@ -325,6 +325,10 @@ struct e1000_mac_operations {
s32 (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *);
s32 (*acquire_swfw_sync)(struct e1000_hw *, u16);
void (*release_swfw_sync)(struct e1000_hw *, u16);
+#ifdef CONFIG_IGB_HWMON
+ s32 (*get_thermal_sensor_data)(struct e1000_hw *);
+ s32 (*init_thermal_sensor_thresh)(struct e1000_hw *);
+#endif
};
@@ -342,6 +346,8 @@ struct e1000_phy_operations {
s32 (*set_d0_lplu_state)(struct e1000_hw *, bool);
s32 (*set_d3_lplu_state)(struct e1000_hw *, bool);
s32 (*write_reg)(struct e1000_hw *, u32, u16);
+ s32 (*read_i2c_byte)(struct e1000_hw *, u8, u8, u8 *);
+ s32 (*write_i2c_byte)(struct e1000_hw *, u8, u8, u8);
};
struct e1000_nvm_operations {
@@ -354,6 +360,19 @@ struct e1000_nvm_operations {
s32 (*valid_led_default)(struct e1000_hw *, u16 *);
};
+#define E1000_MAX_SENSORS 3
+
+struct e1000_thermal_diode_data {
+ u8 location;
+ u8 temp;
+ u8 caution_thresh;
+ u8 max_op_thresh;
+};
+
+struct e1000_thermal_sensor_data {
+ struct e1000_thermal_diode_data sensor[E1000_MAX_SENSORS];
+};
+
struct e1000_info {
s32 (*get_invariants)(struct e1000_hw *);
struct e1000_mac_operations *mac_ops;
@@ -399,6 +418,7 @@ struct e1000_mac_info {
bool report_tx_early;
bool serdes_has_link;
bool tx_pkt_filtering;
+ struct e1000_thermal_sensor_data thermal_sensor_data;
};
struct e1000_phy_info {
diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h
index e5db48594e8a..889de261844d 100644
--- a/drivers/net/ethernet/intel/igb/e1000_regs.h
+++ b/drivers/net/ethernet/intel/igb/e1000_regs.h
@@ -75,6 +75,14 @@
#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
#define E1000_FCRTV 0x02460 /* Flow Control Refresh Timer Value - RW */
+#define E1000_I2CPARAMS 0x0102C /* SFPI2C Parameters Register - RW */
+#define E1000_I2CBB_EN 0x00000100 /* I2C - Bit Bang Enable */
+#define E1000_I2C_CLK_OUT 0x00000200 /* I2C- Clock */
+#define E1000_I2C_DATA_OUT 0x00000400 /* I2C- Data Out */
+#define E1000_I2C_DATA_OE_N 0x00000800 /* I2C- Data Output Enable */
+#define E1000_I2C_DATA_IN 0x00001000 /* I2C- Data In */
+#define E1000_I2C_CLK_OE_N 0x00002000 /* I2C- Clock Output Enable */
+#define E1000_I2C_CLK_IN 0x00004000 /* I2C- Clock In */
/* IEEE 1588 TIMESYNCH */
#define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */
@@ -124,6 +132,14 @@
/* Split and Replication RX Control - RW */
#define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */
+
+/* Thermal sensor configuration and status registers */
+#define E1000_THMJT 0x08100 /* Junction Temperature */
+#define E1000_THLOWTC 0x08104 /* Low Threshold Control */
+#define E1000_THMIDTC 0x08108 /* Mid Threshold Control */
+#define E1000_THHIGHTC 0x0810C /* High Threshold Control */
+#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */
+
/*
* Convenience macros
*
diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index 17f1686ee411..ad317ab3a34c 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -39,6 +39,8 @@
#include <linux/ptp_clock_kernel.h>
#include <linux/bitops.h>
#include <linux/if_vlan.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
struct igb_adapter;
@@ -219,6 +221,7 @@ struct igb_ring {
struct igb_tx_buffer *tx_buffer_info;
struct igb_rx_buffer *rx_buffer_info;
};
+ unsigned long last_rx_timestamp;
void *desc; /* descriptor ring memory */
unsigned long flags; /* ring specific flags */
void __iomem *tail; /* pointer to ring tail register */
@@ -301,6 +304,32 @@ static inline int igb_desc_unused(struct igb_ring *ring)
return ring->count + ring->next_to_clean - ring->next_to_use - 1;
}
+struct igb_i2c_client_list {
+ struct i2c_client *client;
+ struct igb_i2c_client_list *next;
+};
+
+#ifdef CONFIG_IGB_HWMON
+
+#define IGB_HWMON_TYPE_LOC 0
+#define IGB_HWMON_TYPE_TEMP 1
+#define IGB_HWMON_TYPE_CAUTION 2
+#define IGB_HWMON_TYPE_MAX 3
+
+struct hwmon_attr {
+ struct device_attribute dev_attr;
+ struct e1000_hw *hw;
+ struct e1000_thermal_diode_data *sensor;
+ char name[12];
+ };
+
+struct hwmon_buff {
+ struct device *device;
+ struct hwmon_attr *hwmon_list;
+ unsigned int n_hwmon;
+ };
+#endif
+
/* board specific private data structure */
struct igb_adapter {
unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
@@ -386,11 +415,22 @@ struct igb_adapter {
struct delayed_work ptp_overflow_work;
struct work_struct ptp_tx_work;
struct sk_buff *ptp_tx_skb;
+ unsigned long ptp_tx_start;
+ unsigned long last_rx_ptp_check;
spinlock_t tmreg_lock;
struct cyclecounter cc;
struct timecounter tc;
+ u32 tx_hwtstamp_timeouts;
+ u32 rx_hwtstamp_cleared;
char fw_version[32];
+#ifdef CONFIG_IGB_HWMON
+ struct hwmon_buff igb_hwmon_buff;
+ bool ets;
+#endif
+ struct i2c_algo_bit_data i2c_algo;
+ struct i2c_adapter i2c_adap;
+ struct igb_i2c_client_list *i2c_clients;
};
#define IGB_FLAG_HAS_MSI (1 << 0)
@@ -449,6 +489,7 @@ extern void igb_ptp_init(struct igb_adapter *adapter);
extern void igb_ptp_stop(struct igb_adapter *adapter);
extern void igb_ptp_reset(struct igb_adapter *adapter);
extern void igb_ptp_tx_work(struct work_struct *work);
+extern void igb_ptp_rx_hang(struct igb_adapter *adapter);
extern void igb_ptp_tx_hwtstamp(struct igb_adapter *adapter);
extern void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector,
struct sk_buff *skb);
@@ -466,7 +507,10 @@ static inline void igb_ptp_rx_hwtstamp(struct igb_q_vector *q_vector,
extern int igb_ptp_hwtstamp_ioctl(struct net_device *netdev,
struct ifreq *ifr, int cmd);
-
+#ifdef CONFIG_IGB_HWMON
+extern void igb_sysfs_exit(struct igb_adapter *adapter);
+extern int igb_sysfs_init(struct igb_adapter *adapter);
+#endif
static inline s32 igb_reset_phy(struct e1000_hw *hw)
{
if (hw->phy.ops.reset)
diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index bfe9208c4b18..3ff37946f899 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -92,6 +92,8 @@ static const struct igb_stats igb_gstrings_stats[] = {
IGB_STAT("os2bmc_tx_by_bmc", stats.b2ospc),
IGB_STAT("os2bmc_tx_by_host", stats.o2bspc),
IGB_STAT("os2bmc_rx_by_host", stats.b2ogprc),
+ IGB_STAT("tx_hwtstamp_timeouts", tx_hwtstamp_timeouts),
+ IGB_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared),
};
#define IGB_NETDEV_STAT(_net_stat) { \
@@ -2272,12 +2274,21 @@ static int igb_get_ts_info(struct net_device *dev,
struct igb_adapter *adapter = netdev_priv(dev);
switch (adapter->hw.mac.type) {
+ case e1000_82575:
+ info->so_timestamping =
+ SOF_TIMESTAMPING_TX_SOFTWARE |
+ SOF_TIMESTAMPING_RX_SOFTWARE |
+ SOF_TIMESTAMPING_SOFTWARE;
+ return 0;
case e1000_82576:
case e1000_82580:
case e1000_i350:
case e1000_i210:
case e1000_i211:
info->so_timestamping =
+ SOF_TIMESTAMPING_TX_SOFTWARE |
+ SOF_TIMESTAMPING_RX_SOFTWARE |
+ SOF_TIMESTAMPING_SOFTWARE |
SOF_TIMESTAMPING_TX_HARDWARE |
SOF_TIMESTAMPING_RX_HARDWARE |
SOF_TIMESTAMPING_RAW_HARDWARE;
diff --git a/drivers/net/ethernet/intel/igb/igb_hwmon.c b/drivers/net/ethernet/intel/igb/igb_hwmon.c
new file mode 100644
index 000000000000..106bd7c29bc9
--- /dev/null
+++ b/drivers/net/ethernet/intel/igb/igb_hwmon.c
@@ -0,0 +1,242 @@
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007-2012 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "igb.h"
+#include "e1000_82575.h"
+#include "e1000_hw.h"
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/hwmon.h>
+#include <linux/pci.h>
+
+#ifdef CONFIG_IGB_HWMON
+/* hwmon callback functions */
+static ssize_t igb_hwmon_show_location(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr,
+ dev_attr);
+ return sprintf(buf, "loc%u\n",
+ igb_attr->sensor->location);
+}
+
+static ssize_t igb_hwmon_show_temp(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr,
+ dev_attr);
+ unsigned int value;
+
+ /* reset the temp field */
+ igb_attr->hw->mac.ops.get_thermal_sensor_data(igb_attr->hw);
+
+ value = igb_attr->sensor->temp;
+
+ /* display millidegree */
+ value *= 1000;
+
+ return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t igb_hwmon_show_cautionthresh(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr,
+ dev_attr);
+ unsigned int value = igb_attr->sensor->caution_thresh;
+
+ /* display millidegree */
+ value *= 1000;
+
+ return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t igb_hwmon_show_maxopthresh(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr,
+ dev_attr);
+ unsigned int value = igb_attr->sensor->max_op_thresh;
+
+ /* display millidegree */
+ value *= 1000;
+
+ return sprintf(buf, "%u\n", value);
+}
+
+/* igb_add_hwmon_attr - Create hwmon attr table for a hwmon sysfs file.
+ * @ adapter: pointer to the adapter structure
+ * @ offset: offset in the eeprom sensor data table
+ * @ type: type of sensor data to display
+ *
+ * For each file we want in hwmon's sysfs interface we need a device_attribute
+ * This is included in our hwmon_attr struct that contains the references to
+ * the data structures we need to get the data to display.
+ */
+static int igb_add_hwmon_attr(struct igb_adapter *adapter,
+ unsigned int offset, int type) {
+ int rc;
+ unsigned int n_attr;
+ struct hwmon_attr *igb_attr;
+
+ n_attr = adapter->igb_hwmon_buff.n_hwmon;
+ igb_attr = &adapter->igb_hwmon_buff.hwmon_list[n_attr];
+
+ switch (type) {
+ case IGB_HWMON_TYPE_LOC:
+ igb_attr->dev_attr.show = igb_hwmon_show_location;
+ snprintf(igb_attr->name, sizeof(igb_attr->name),
+ "temp%u_label", offset);
+ break;
+ case IGB_HWMON_TYPE_TEMP:
+ igb_attr->dev_attr.show = igb_hwmon_show_temp;
+ snprintf(igb_attr->name, sizeof(igb_attr->name),
+ "temp%u_input", offset);
+ break;
+ case IGB_HWMON_TYPE_CAUTION:
+ igb_attr->dev_attr.show = igb_hwmon_show_cautionthresh;
+ snprintf(igb_attr->name, sizeof(igb_attr->name),
+ "temp%u_max", offset);
+ break;
+ case IGB_HWMON_TYPE_MAX:
+ igb_attr->dev_attr.show = igb_hwmon_show_maxopthresh;
+ snprintf(igb_attr->name, sizeof(igb_attr->name),
+ "temp%u_crit", offset);
+ break;
+ default:
+ rc = -EPERM;
+ return rc;
+ }
+
+ /* These always the same regardless of type */
+ igb_attr->sensor =
+ &adapter->hw.mac.thermal_sensor_data.sensor[offset];
+ igb_attr->hw = &adapter->hw;
+ igb_attr->dev_attr.store = NULL;
+ igb_attr->dev_attr.attr.mode = S_IRUGO;
+ igb_attr->dev_attr.attr.name = igb_attr->name;
+ sysfs_attr_init(&igb_attr->dev_attr.attr);
+ rc = device_create_file(&adapter->pdev->dev,
+ &igb_attr->dev_attr);
+ if (rc == 0)
+ ++adapter->igb_hwmon_buff.n_hwmon;
+
+ return rc;
+}
+
+static void igb_sysfs_del_adapter(struct igb_adapter *adapter)
+{
+ int i;
+
+ if (adapter == NULL)
+ return;
+
+ for (i = 0; i < adapter->igb_hwmon_buff.n_hwmon; i++) {
+ device_remove_file(&adapter->pdev->dev,
+ &adapter->igb_hwmon_buff.hwmon_list[i].dev_attr);
+ }
+
+ kfree(adapter->igb_hwmon_buff.hwmon_list);
+
+ if (adapter->igb_hwmon_buff.device)
+ hwmon_device_unregister(adapter->igb_hwmon_buff.device);
+}
+
+/* called from igb_main.c */
+void igb_sysfs_exit(struct igb_adapter *adapter)
+{
+ igb_sysfs_del_adapter(adapter);
+}
+
+/* called from igb_main.c */
+int igb_sysfs_init(struct igb_adapter *adapter)
+{
+ struct hwmon_buff *igb_hwmon = &adapter->igb_hwmon_buff;
+ unsigned int i;
+ int n_attrs;
+ int rc = 0;
+
+ /* If this method isn't defined we don't support thermals */
+ if (adapter->hw.mac.ops.init_thermal_sensor_thresh == NULL)
+ goto exit;
+
+ /* Don't create thermal hwmon interface if no sensors present */
+ rc = (adapter->hw.mac.ops.init_thermal_sensor_thresh(&adapter->hw));
+ if (rc)
+ goto exit;
+
+ /* Allocation space for max attributes
+ * max num sensors * values (loc, temp, max, caution)
+ */
+ n_attrs = E1000_MAX_SENSORS * 4;
+ igb_hwmon->hwmon_list = kcalloc(n_attrs, sizeof(struct hwmon_attr),
+ GFP_KERNEL);
+ if (!igb_hwmon->hwmon_list) {
+ rc = -ENOMEM;
+ goto err;
+ }
+
+ igb_hwmon->device = hwmon_device_register(&adapter->pdev->dev);
+ if (IS_ERR(igb_hwmon->device)) {
+ rc = PTR_ERR(igb_hwmon->device);
+ goto err;
+ }
+
+ for (i = 0; i < E1000_MAX_SENSORS; i++) {
+
+ /* Only create hwmon sysfs entries for sensors that have
+ * meaningful data.
+ */
+ if (adapter->hw.mac.thermal_sensor_data.sensor[i].location == 0)
+ continue;
+
+ /* Bail if any hwmon attr struct fails to initialize */
+ rc = igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_CAUTION);
+ rc |= igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_LOC);
+ rc |= igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_TEMP);
+ rc |= igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_MAX);
+ if (rc)
+ goto err;
+ }
+
+ goto exit;
+
+err:
+ igb_sysfs_del_adapter(adapter);
+exit:
+ return rc;
+}
+#endif
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index a0a31b55a073..c9e438ba1ec2 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -57,6 +57,7 @@
#ifdef CONFIG_IGB_DCA
#include <linux/dca.h>
#endif
+#include <linux/i2c.h>
#include "igb.h"
#define MAJ 4
@@ -193,6 +194,7 @@ static const struct dev_pm_ops igb_pm_ops = {
};
#endif
static void igb_shutdown(struct pci_dev *);
+static int igb_pci_sriov_configure(struct pci_dev *dev, int num_vfs);
#ifdef CONFIG_IGB_DCA
static int igb_notify_dca(struct notifier_block *, unsigned long, void *);
static struct notifier_block dca_notifier = {
@@ -234,6 +236,7 @@ static struct pci_driver igb_driver = {
.driver.pm = &igb_pm_ops,
#endif
.shutdown = igb_shutdown,
+ .sriov_configure = igb_pci_sriov_configure,
.err_handler = &igb_err_handler
};
@@ -565,6 +568,91 @@ exit:
return;
}
+/* igb_get_i2c_data - Reads the I2C SDA data bit
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ *
+ * Returns the I2C data bit value
+ */
+static int igb_get_i2c_data(void *data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+ return ((i2cctl & E1000_I2C_DATA_IN) != 0);
+}
+
+/* igb_set_i2c_data - Sets the I2C data bit
+ * @data: pointer to hardware structure
+ * @state: I2C data value (0 or 1) to set
+ *
+ * Sets the I2C data bit
+ */
+static void igb_set_i2c_data(void *data, int state)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+ if (state)
+ i2cctl |= E1000_I2C_DATA_OUT;
+ else
+ i2cctl &= ~E1000_I2C_DATA_OUT;
+
+ i2cctl &= ~E1000_I2C_DATA_OE_N;
+ i2cctl |= E1000_I2C_CLK_OE_N;
+ wr32(E1000_I2CPARAMS, i2cctl);
+ wrfl();
+
+}
+
+/* igb_set_i2c_clk - Sets the I2C SCL clock
+ * @data: pointer to hardware structure
+ * @state: state to set clock
+ *
+ * Sets the I2C clock line to state
+ */
+static void igb_set_i2c_clk(void *data, int state)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+ if (state) {
+ i2cctl |= E1000_I2C_CLK_OUT;
+ i2cctl &= ~E1000_I2C_CLK_OE_N;
+ } else {
+ i2cctl &= ~E1000_I2C_CLK_OUT;
+ i2cctl &= ~E1000_I2C_CLK_OE_N;
+ }
+ wr32(E1000_I2CPARAMS, i2cctl);
+ wrfl();
+}
+
+/* igb_get_i2c_clk - Gets the I2C SCL clock state
+ * @data: pointer to hardware structure
+ *
+ * Gets the I2C clock state
+ */
+static int igb_get_i2c_clk(void *data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+ return ((i2cctl & E1000_I2C_CLK_IN) != 0);
+}
+
+static const struct i2c_algo_bit_data igb_i2c_algo = {
+ .setsda = igb_set_i2c_data,
+ .setscl = igb_set_i2c_clk,
+ .getsda = igb_get_i2c_data,
+ .getscl = igb_get_i2c_clk,
+ .udelay = 5,
+ .timeout = 20,
+};
+
/**
* igb_get_hw_dev - return device
* used by hardware layer to print debugging information
@@ -1708,6 +1796,18 @@ void igb_reset(struct igb_adapter *adapter)
igb_force_mac_fc(hw);
igb_init_dmac(adapter, pba);
+#ifdef CONFIG_IGB_HWMON
+ /* Re-initialize the thermal sensor on i350 devices. */
+ if (!test_bit(__IGB_DOWN, &adapter->state)) {
+ if (mac->type == e1000_i350 && hw->bus.func == 0) {
+ /* If present, re-initialize the external thermal sensor
+ * interface.
+ */
+ if (adapter->ets)
+ mac->ops.init_thermal_sensor_thresh(hw);
+ }
+ }
+#endif
if (!netif_running(adapter->netdev))
igb_power_down_link(adapter);
@@ -1822,6 +1922,37 @@ void igb_set_fw_version(struct igb_adapter *adapter)
return;
}
+static const struct i2c_board_info i350_sensor_info = {
+ I2C_BOARD_INFO("i350bb", 0Xf8),
+};
+
+/* igb_init_i2c - Init I2C interface
+ * @adapter: pointer to adapter structure
+ *
+ */
+static s32 igb_init_i2c(struct igb_adapter *adapter)
+{
+ s32 status = E1000_SUCCESS;
+
+ /* I2C interface supported on i350 devices */
+ if (adapter->hw.mac.type != e1000_i350)
+ return E1000_SUCCESS;
+
+ /* Initialize the i2c bus which is controlled by the registers.
+ * This bus will use the i2c_algo_bit structue that implements
+ * the protocol through toggling of the 4 bits in the register.
+ */
+ adapter->i2c_adap.owner = THIS_MODULE;
+ adapter->i2c_algo = igb_i2c_algo;
+ adapter->i2c_algo.data = adapter;
+ adapter->i2c_adap.algo_data = &adapter->i2c_algo;
+ adapter->i2c_adap.dev.parent = &adapter->pdev->dev;
+ strlcpy(adapter->i2c_adap.name, "igb BB",
+ sizeof(adapter->i2c_adap.name));
+ status = i2c_bit_add_bus(&adapter->i2c_adap);
+ return status;
+}
+
/**
* igb_probe - Device Initialization Routine
* @pdev: PCI device information struct
@@ -2114,6 +2245,13 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* reset the hardware with the new settings */
igb_reset(adapter);
+ /* Init the I2C interface */
+ err = igb_init_i2c(adapter);
+ if (err) {
+ dev_err(&pdev->dev, "failed to init i2c interface\n");
+ goto err_eeprom;
+ }
+
/* let the f/w know that the h/w is now under the control of the
* driver. */
igb_get_hw_control(adapter);
@@ -2134,7 +2272,27 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
#endif
+#ifdef CONFIG_IGB_HWMON
+ /* Initialize the thermal sensor on i350 devices. */
+ if (hw->mac.type == e1000_i350 && hw->bus.func == 0) {
+ u16 ets_word;
+ /*
+ * Read the NVM to determine if this i350 device supports an
+ * external thermal sensor.
+ */
+ hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_word);
+ if (ets_word != 0x0000 && ets_word != 0xFFFF)
+ adapter->ets = true;
+ else
+ adapter->ets = false;
+ if (igb_sysfs_init(adapter))
+ dev_err(&pdev->dev,
+ "failed to allocate sysfs resources\n");
+ } else {
+ adapter->ets = false;
+ }
+#endif
/* do hw tstamp init after resetting */
igb_ptp_init(adapter);
@@ -2175,6 +2333,7 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
err_register:
igb_release_hw_control(adapter);
+ memset(&adapter->i2c_adap, 0, sizeof(adapter->i2c_adap));
err_eeprom:
if (!igb_check_reset_block(hw))
igb_reset_phy(hw);
@@ -2195,6 +2354,111 @@ err_dma:
return err;
}
+#ifdef CONFIG_PCI_IOV
+static int igb_disable_sriov(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* reclaim resources allocated to VFs */
+ if (adapter->vf_data) {
+ /* disable iov and allow time for transactions to clear */
+ if (igb_vfs_are_assigned(adapter)) {
+ dev_warn(&pdev->dev,
+ "Cannot deallocate SR-IOV virtual functions while they are assigned - VFs will not be deallocated\n");
+ return -EPERM;
+ } else {
+ pci_disable_sriov(pdev);
+ msleep(500);
+ }
+
+ kfree(adapter->vf_data);
+ adapter->vf_data = NULL;
+ adapter->vfs_allocated_count = 0;
+ wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
+ wrfl();
+ msleep(100);
+ dev_info(&pdev->dev, "IOV Disabled\n");
+
+ /* Re-enable DMA Coalescing flag since IOV is turned off */
+ adapter->flags |= IGB_FLAG_DMAC;
+ }
+
+ return 0;
+}
+
+static int igb_enable_sriov(struct pci_dev *pdev, int num_vfs)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ int old_vfs = pci_num_vf(pdev);
+ int err = 0;
+ int i;
+
+ if (!num_vfs)
+ goto out;
+ else if (old_vfs && old_vfs == num_vfs)
+ goto out;
+ else if (old_vfs && old_vfs != num_vfs)
+ err = igb_disable_sriov(pdev);
+
+ if (err)
+ goto out;
+
+ if (num_vfs > 7) {
+ err = -EPERM;
+ goto out;
+ }
+
+ adapter->vfs_allocated_count = num_vfs;
+
+ adapter->vf_data = kcalloc(adapter->vfs_allocated_count,
+ sizeof(struct vf_data_storage), GFP_KERNEL);
+
+ /* if allocation failed then we do not support SR-IOV */
+ if (!adapter->vf_data) {
+ adapter->vfs_allocated_count = 0;
+ dev_err(&pdev->dev,
+ "Unable to allocate memory for VF Data Storage\n");
+ err = -ENOMEM;
+ goto out;
+ }
+
+ err = pci_enable_sriov(pdev, adapter->vfs_allocated_count);
+ if (err)
+ goto err_out;
+
+ dev_info(&pdev->dev, "%d VFs allocated\n",
+ adapter->vfs_allocated_count);
+ for (i = 0; i < adapter->vfs_allocated_count; i++)
+ igb_vf_configure(adapter, i);
+
+ /* DMA Coalescing is not supported in IOV mode. */
+ adapter->flags &= ~IGB_FLAG_DMAC;
+ goto out;
+
+err_out:
+ kfree(adapter->vf_data);
+ adapter->vf_data = NULL;
+ adapter->vfs_allocated_count = 0;
+out:
+ return err;
+}
+
+#endif
+/*
+ * igb_remove_i2c - Cleanup I2C interface
+ * @adapter: pointer to adapter structure
+ *
+ */
+static void igb_remove_i2c(struct igb_adapter *adapter)
+{
+
+ /* free the adapter bus structure */
+ i2c_del_adapter(&adapter->i2c_adap);
+}
+
/**
* igb_remove - Device Removal Routine
* @pdev: PCI device information struct
@@ -2211,8 +2475,11 @@ static void igb_remove(struct pci_dev *pdev)
struct e1000_hw *hw = &adapter->hw;
pm_runtime_get_noresume(&pdev->dev);
+#ifdef CONFIG_IGB_HWMON
+ igb_sysfs_exit(adapter);
+#endif
+ igb_remove_i2c(adapter);
igb_ptp_stop(adapter);
-
/*
* The watchdog timer may be rescheduled, so explicitly
* disable watchdog from being rescheduled.
@@ -2242,23 +2509,7 @@ static void igb_remove(struct pci_dev *pdev)
igb_clear_interrupt_scheme(adapter);
#ifdef CONFIG_PCI_IOV
- /* reclaim resources allocated to VFs */
- if (adapter->vf_data) {
- /* disable iov and allow time for transactions to clear */
- if (igb_vfs_are_assigned(adapter)) {
- dev_info(&pdev->dev, "Unloading driver while VFs are assigned - VFs will not be deallocated\n");
- } else {
- pci_disable_sriov(pdev);
- msleep(500);
- }
-
- kfree(adapter->vf_data);
- adapter->vf_data = NULL;
- wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
- wrfl();
- msleep(100);
- dev_info(&pdev->dev, "IOV Disabled\n");
- }
+ igb_disable_sriov(pdev);
#endif
iounmap(hw->hw_addr);
@@ -2289,103 +2540,22 @@ static void igb_probe_vfs(struct igb_adapter *adapter)
#ifdef CONFIG_PCI_IOV
struct pci_dev *pdev = adapter->pdev;
struct e1000_hw *hw = &adapter->hw;
- int old_vfs = pci_num_vf(adapter->pdev);
- int i;
/* Virtualization features not supported on i210 family. */
if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211))
return;
- if (old_vfs) {
- dev_info(&pdev->dev, "%d pre-allocated VFs found - override "
- "max_vfs setting of %d\n", old_vfs, max_vfs);
- adapter->vfs_allocated_count = old_vfs;
- }
-
- if (!adapter->vfs_allocated_count)
- return;
-
- adapter->vf_data = kcalloc(adapter->vfs_allocated_count,
- sizeof(struct vf_data_storage), GFP_KERNEL);
+ igb_enable_sriov(pdev, max_vfs);
+ pci_sriov_set_totalvfs(pdev, 7);
- /* if allocation failed then we do not support SR-IOV */
- if (!adapter->vf_data) {
- adapter->vfs_allocated_count = 0;
- dev_err(&pdev->dev, "Unable to allocate memory for VF "
- "Data Storage\n");
- goto out;
- }
-
- if (!old_vfs) {
- if (pci_enable_sriov(pdev, adapter->vfs_allocated_count))
- goto err_out;
- }
- dev_info(&pdev->dev, "%d VFs allocated\n",
- adapter->vfs_allocated_count);
- for (i = 0; i < adapter->vfs_allocated_count; i++)
- igb_vf_configure(adapter, i);
-
- /* DMA Coalescing is not supported in IOV mode. */
- adapter->flags &= ~IGB_FLAG_DMAC;
- goto out;
-err_out:
- kfree(adapter->vf_data);
- adapter->vf_data = NULL;
- adapter->vfs_allocated_count = 0;
-out:
- return;
#endif /* CONFIG_PCI_IOV */
}
-/**
- * igb_sw_init - Initialize general software structures (struct igb_adapter)
- * @adapter: board private structure to initialize
- *
- * igb_sw_init initializes the Adapter private data structure.
- * Fields are initialized based on PCI device information and
- * OS network device settings (MTU size).
- **/
-static int igb_sw_init(struct igb_adapter *adapter)
+static void igb_init_queue_configuration(struct igb_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
u32 max_rss_queues;
- pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word);
-
- /* set default ring sizes */
- adapter->tx_ring_count = IGB_DEFAULT_TXD;
- adapter->rx_ring_count = IGB_DEFAULT_RXD;
-
- /* set default ITR values */
- adapter->rx_itr_setting = IGB_DEFAULT_ITR;
- adapter->tx_itr_setting = IGB_DEFAULT_ITR;
-
- /* set default work limits */
- adapter->tx_work_limit = IGB_DEFAULT_TX_WORK;
-
- adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN +
- VLAN_HLEN;
- adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
-
- spin_lock_init(&adapter->stats64_lock);
-#ifdef CONFIG_PCI_IOV
- switch (hw->mac.type) {
- case e1000_82576:
- case e1000_i350:
- if (max_vfs > 7) {
- dev_warn(&pdev->dev,
- "Maximum of 7 VFs per PF, using max\n");
- adapter->vfs_allocated_count = 7;
- } else
- adapter->vfs_allocated_count = max_vfs;
- break;
- default:
- break;
- }
-#endif /* CONFIG_PCI_IOV */
-
/* Determine the maximum number of RSS queues supported. */
switch (hw->mac.type) {
case e1000_i211:
@@ -2444,6 +2614,60 @@ static int igb_sw_init(struct igb_adapter *adapter)
adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
break;
}
+}
+
+/**
+ * igb_sw_init - Initialize general software structures (struct igb_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * igb_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+static int igb_sw_init(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word);
+
+ /* set default ring sizes */
+ adapter->tx_ring_count = IGB_DEFAULT_TXD;
+ adapter->rx_ring_count = IGB_DEFAULT_RXD;
+
+ /* set default ITR values */
+ adapter->rx_itr_setting = IGB_DEFAULT_ITR;
+ adapter->tx_itr_setting = IGB_DEFAULT_ITR;
+
+ /* set default work limits */
+ adapter->tx_work_limit = IGB_DEFAULT_TX_WORK;
+
+ adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN +
+ VLAN_HLEN;
+ adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+
+ spin_lock_init(&adapter->stats64_lock);
+#ifdef CONFIG_PCI_IOV
+ switch (hw->mac.type) {
+ case e1000_82576:
+ case e1000_i350:
+ if (max_vfs > 7) {
+ dev_warn(&pdev->dev,
+ "Maximum of 7 VFs per PF, using max\n");
+ adapter->vfs_allocated_count = 7;
+ } else
+ adapter->vfs_allocated_count = max_vfs;
+ if (adapter->vfs_allocated_count)
+ dev_warn(&pdev->dev,
+ "Enabling SR-IOV VFs using the module parameter is deprecated - please use the pci sysfs interface.\n");
+ break;
+ default:
+ break;
+ }
+#endif /* CONFIG_PCI_IOV */
+
+ igb_init_queue_configuration(adapter);
/* Setup and initialize a copy of the hw vlan table array */
adapter->shadow_vfta = kzalloc(sizeof(u32) *
@@ -3767,6 +3991,7 @@ static void igb_watchdog_task(struct work_struct *work)
}
igb_spoof_check(adapter);
+ igb_ptp_rx_hang(adapter);
/* Reset the timer */
if (!test_bit(__IGB_DOWN, &adapter->state))
@@ -4386,12 +4611,15 @@ netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb,
first->bytecount = skb->len;
first->gso_segs = 1;
+ skb_tx_timestamp(skb);
+
if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
!(adapter->ptp_tx_skb))) {
skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
tx_flags |= IGB_TX_FLAGS_TSTAMP;
adapter->ptp_tx_skb = skb_get(skb);
+ adapter->ptp_tx_start = jiffies;
if (adapter->hw.mac.type == e1000_82576)
schedule_work(&adapter->ptp_tx_work);
}
@@ -6902,6 +7130,72 @@ static void igb_shutdown(struct pci_dev *pdev)
}
}
+#ifdef CONFIG_PCI_IOV
+static int igb_sriov_reinit(struct pci_dev *dev)
+{
+ struct net_device *netdev = pci_get_drvdata(dev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
+
+ rtnl_lock();
+
+ if (netif_running(netdev))
+ igb_close(netdev);
+
+ igb_clear_interrupt_scheme(adapter);
+
+ igb_init_queue_configuration(adapter);
+
+ if (igb_init_interrupt_scheme(adapter, true)) {
+ dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ if (netif_running(netdev))
+ igb_open(netdev);
+
+ rtnl_unlock();
+
+ return 0;
+}
+
+static int igb_pci_disable_sriov(struct pci_dev *dev)
+{
+ int err = igb_disable_sriov(dev);
+
+ if (!err)
+ err = igb_sriov_reinit(dev);
+
+ return err;
+}
+
+static int igb_pci_enable_sriov(struct pci_dev *dev, int num_vfs)
+{
+ int err = igb_enable_sriov(dev, num_vfs);
+
+ if (err)
+ goto out;
+
+ err = igb_sriov_reinit(dev);
+ if (!err)
+ return num_vfs;
+
+out:
+ return err;
+}
+
+#endif
+static int igb_pci_sriov_configure(struct pci_dev *dev, int num_vfs)
+{
+#ifdef CONFIG_PCI_IOV
+ if (num_vfs == 0)
+ return igb_pci_disable_sriov(dev);
+ else
+ return igb_pci_enable_sriov(dev, num_vfs);
+#endif
+ return 0;
+}
+
#ifdef CONFIG_NET_POLL_CONTROLLER
/*
* Polling 'interrupt' - used by things like netconsole to send skbs
@@ -7307,4 +7601,138 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba)
}
}
+static DEFINE_SPINLOCK(i2c_clients_lock);
+
+/* igb_get_i2c_client - returns matching client
+ * in adapters's client list.
+ * @adapter: adapter struct
+ * @dev_addr: device address of i2c needed.
+ */
+struct i2c_client *
+igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr)
+{
+ ulong flags;
+ struct igb_i2c_client_list *client_list;
+ struct i2c_client *client = NULL;
+ struct i2c_board_info client_info = {
+ I2C_BOARD_INFO("igb", 0x00),
+ };
+
+ spin_lock_irqsave(&i2c_clients_lock, flags);
+ client_list = adapter->i2c_clients;
+
+ /* See if we already have an i2c_client */
+ while (client_list) {
+ if (client_list->client->addr == (dev_addr >> 1)) {
+ client = client_list->client;
+ goto exit;
+ } else {
+ client_list = client_list->next;
+ }
+ }
+
+ /* no client_list found, create a new one as long as
+ * irqs are not disabled
+ */
+ if (unlikely(irqs_disabled()))
+ goto exit;
+
+ client_list = kzalloc(sizeof(*client_list), GFP_KERNEL);
+ if (client_list == NULL)
+ goto exit;
+
+ /* dev_addr passed to us is left-shifted by 1 bit
+ * i2c_new_device call expects it to be flush to the right.
+ */
+ client_info.addr = dev_addr >> 1;
+ client_info.platform_data = adapter;
+ client_list->client = i2c_new_device(&adapter->i2c_adap, &client_info);
+ if (client_list->client == NULL) {
+ dev_info(&adapter->pdev->dev,
+ "Failed to create new i2c device..\n");
+ goto err_no_client;
+ }
+
+ /* insert new client at head of list */
+ client_list->next = adapter->i2c_clients;
+ adapter->i2c_clients = client_list;
+
+ client = client_list->client;
+ goto exit;
+
+err_no_client:
+ kfree(client_list);
+exit:
+ spin_unlock_irqrestore(&i2c_clients_lock, flags);
+ return client;
+}
+
+/* igb_read_i2c_byte - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @dev_addr: device address
+ * @data: value read
+ *
+ * Performs byte read operation over I2C interface at
+ * a specified device address.
+ */
+s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data)
+{
+ struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
+ struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr);
+ s32 status;
+ u16 swfw_mask = 0;
+
+ if (!this_client)
+ return E1000_ERR_I2C;
+
+ swfw_mask = E1000_SWFW_PHY0_SM;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)
+ != E1000_SUCCESS)
+ return E1000_ERR_SWFW_SYNC;
+
+ status = i2c_smbus_read_byte_data(this_client, byte_offset);
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+ if (status < 0)
+ return E1000_ERR_I2C;
+ else {
+ *data = status;
+ return E1000_SUCCESS;
+ }
+}
+
+/* igb_write_i2c_byte - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @dev_addr: device address
+ * @data: value to write
+ *
+ * Performs byte write operation over I2C interface at
+ * a specified device address.
+ */
+s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data)
+{
+ struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
+ struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr);
+ s32 status;
+ u16 swfw_mask = E1000_SWFW_PHY0_SM;
+
+ if (!this_client)
+ return E1000_ERR_I2C;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != E1000_SUCCESS)
+ return E1000_ERR_SWFW_SYNC;
+ status = i2c_smbus_write_byte_data(this_client, byte_offset, data);
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+ if (status)
+ return E1000_ERR_I2C;
+ else
+ return E1000_SUCCESS;
+
+}
/* igb_main.c */
diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index ab3429729bde..0987822359f0 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -20,6 +20,7 @@
#include <linux/module.h>
#include <linux/device.h>
#include <linux/pci.h>
+#include <linux/ptp_classify.h>
#include "igb.h"
@@ -70,6 +71,7 @@
*/
#define IGB_SYSTIM_OVERFLOW_PERIOD (HZ * 60 * 9)
+#define IGB_PTP_TX_TIMEOUT (HZ * 15)
#define INCPERIOD_82576 (1 << E1000_TIMINCA_16NS_SHIFT)
#define INCVALUE_82576_MASK ((1 << E1000_TIMINCA_16NS_SHIFT) - 1)
#define INCVALUE_82576 (16 << IGB_82576_TSYNC_SHIFT)
@@ -396,6 +398,15 @@ void igb_ptp_tx_work(struct work_struct *work)
if (!adapter->ptp_tx_skb)
return;
+ if (time_is_before_jiffies(adapter->ptp_tx_start +
+ IGB_PTP_TX_TIMEOUT)) {
+ dev_kfree_skb_any(adapter->ptp_tx_skb);
+ adapter->ptp_tx_skb = NULL;
+ adapter->tx_hwtstamp_timeouts++;
+ dev_warn(&adapter->pdev->dev, "clearing Tx timestamp hang");
+ return;
+ }
+
tsynctxctl = rd32(E1000_TSYNCTXCTL);
if (tsynctxctl & E1000_TSYNCTXCTL_VALID)
igb_ptp_tx_hwtstamp(adapter);
@@ -419,6 +430,51 @@ static void igb_ptp_overflow_check(struct work_struct *work)
}
/**
+ * igb_ptp_rx_hang - detect error case when Rx timestamp registers latched
+ * @adapter: private network adapter structure
+ *
+ * This watchdog task is scheduled to detect error case where hardware has
+ * dropped an Rx packet that was timestamped when the ring is full. The
+ * particular error is rare but leaves the device in a state unable to timestamp
+ * any future packets.
+ */
+void igb_ptp_rx_hang(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct igb_ring *rx_ring;
+ u32 tsyncrxctl = rd32(E1000_TSYNCRXCTL);
+ unsigned long rx_event;
+ int n;
+
+ if (hw->mac.type != e1000_82576)
+ return;
+
+ /* If we don't have a valid timestamp in the registers, just update the
+ * timeout counter and exit
+ */
+ if (!(tsyncrxctl & E1000_TSYNCRXCTL_VALID)) {
+ adapter->last_rx_ptp_check = jiffies;
+ return;
+ }
+
+ /* Determine the most recent watchdog or rx_timestamp event */
+ rx_event = adapter->last_rx_ptp_check;
+ for (n = 0; n < adapter->num_rx_queues; n++) {
+ rx_ring = adapter->rx_ring[n];
+ if (time_after(rx_ring->last_rx_timestamp, rx_event))
+ rx_event = rx_ring->last_rx_timestamp;
+ }
+
+ /* Only need to read the high RXSTMP register to clear the lock */
+ if (time_is_before_jiffies(rx_event + 5 * HZ)) {
+ rd32(E1000_RXSTMPH);
+ adapter->last_rx_ptp_check = jiffies;
+ adapter->rx_hwtstamp_cleared++;
+ dev_warn(&adapter->pdev->dev, "clearing Rx timestamp hang");
+ }
+}
+
+/**
* igb_ptp_tx_hwtstamp - utility function which checks for TX time stamp
* @adapter: Board private structure.
*
@@ -643,7 +699,6 @@ int igb_ptp_hwtstamp_ioctl(struct net_device *netdev,
else
wr32(E1000_ETQF(3), 0);
-#define PTP_PORT 319
/* L4 Queue Filter[3]: filter by destination port and protocol */
if (is_l4) {
u32 ftqf = (IPPROTO_UDP /* UDP */
@@ -652,12 +707,12 @@ int igb_ptp_hwtstamp_ioctl(struct net_device *netdev,
| E1000_FTQF_MASK); /* mask all inputs */
ftqf &= ~E1000_FTQF_MASK_PROTO_BP; /* enable protocol check */
- wr32(E1000_IMIR(3), htons(PTP_PORT));
+ wr32(E1000_IMIR(3), htons(PTP_EV_PORT));
wr32(E1000_IMIREXT(3),
(E1000_IMIREXT_SIZE_BP | E1000_IMIREXT_CTRL_BP));
if (hw->mac.type == e1000_82576) {
/* enable source port check */
- wr32(E1000_SPQF(3), htons(PTP_PORT));
+ wr32(E1000_SPQF(3), htons(PTP_EV_PORT));
ftqf &= ~E1000_FTQF_MASK_SOURCE_PORT_BP;
}
wr32(E1000_FTQF(3), ftqf);
@@ -801,6 +856,10 @@ void igb_ptp_stop(struct igb_adapter *adapter)
}
cancel_work_sync(&adapter->ptp_tx_work);
+ if (adapter->ptp_tx_skb) {
+ dev_kfree_skb_any(adapter->ptp_tx_skb);
+ adapter->ptp_tx_skb = NULL;
+ }
if (adapter->ptp_clock) {
ptp_clock_unregister(adapter->ptp_clock);