diff options
Diffstat (limited to 'tests/headers/layout_mbuf_1_0.h')
| -rw-r--r-- | tests/headers/layout_mbuf_1_0.h | 189 |
1 files changed, 189 insertions, 0 deletions
diff --git a/tests/headers/layout_mbuf_1_0.h b/tests/headers/layout_mbuf_1_0.h new file mode 100644 index 00000000..18ca60c1 --- /dev/null +++ b/tests/headers/layout_mbuf_1_0.h @@ -0,0 +1,189 @@ +// bindgen-flags: --rust-target 1.0 --with-derive-hash + + +#define RTE_CACHE_LINE_MIN_SIZE 64 /**< Minimum Cache line size. */ + +#define RTE_CACHE_LINE_SIZE 64 + +typedef char int8_t; +typedef short int16_t; +typedef int int32_t; +typedef long long int64_t; + +typedef unsigned char uint8_t; +typedef unsigned short uint16_t; +typedef unsigned int uint32_t; +typedef unsigned long long uint64_t; + +typedef uint64_t phys_addr_t; + +/** + * Force alignment + */ +#define __rte_aligned(a) __attribute__((__aligned__(a))) + +/** + * Force alignment to cache line. + */ +#define __rte_cache_aligned __rte_aligned(RTE_CACHE_LINE_SIZE) + +/** + * Force minimum cache line alignment. + */ +#define __rte_cache_min_aligned __rte_aligned(RTE_CACHE_LINE_MIN_SIZE) + +/* define a set of marker types that can be used to refer to set points in the + * mbuf */ +__extension__ +typedef void *MARKER[0]; /**< generic marker for a point in a structure */ +__extension__ +typedef uint8_t MARKER8[0]; /**< generic marker with 1B alignment */ +__extension__ +typedef uint64_t MARKER64[0]; /**< marker that allows us to overwrite 8 bytes + * with a single assignment */ + +/** C extension macro for environments lacking C11 features. */ +#if !defined(__STDC_VERSION__) || __STDC_VERSION__ < 201112L +#define RTE_STD_C11 __extension__ +#else +#define RTE_STD_C11 +#endif + +/** + * The atomic counter structure. + */ +typedef struct { + volatile int16_t cnt; /**< An internal counter value. */ +} rte_atomic16_t; + +/** + * The generic rte_mbuf, containing a packet mbuf. + */ +struct rte_mbuf { + MARKER cacheline0; + + void *buf_addr; /**< Virtual address of segment buffer. */ + phys_addr_t buf_physaddr; /**< Physical address of segment buffer. */ + + uint16_t buf_len; /**< Length of segment buffer. */ + + /* next 6 bytes are initialised on RX descriptor rearm */ + MARKER8 rearm_data; + uint16_t data_off; + + /** + * 16-bit Reference counter. + * It should only be accessed using the following functions: + * rte_mbuf_refcnt_update(), rte_mbuf_refcnt_read(), and + * rte_mbuf_refcnt_set(). The functionality of these functions (atomic, + * or non-atomic) is controlled by the CONFIG_RTE_MBUF_REFCNT_ATOMIC + * config option. + */ + RTE_STD_C11 + union { + rte_atomic16_t refcnt_atomic; /**< Atomically accessed refcnt */ + uint16_t refcnt; /**< Non-atomically accessed refcnt */ + }; + uint8_t nb_segs; /**< Number of segments. */ + uint8_t port; /**< Input port. */ + + uint64_t ol_flags; /**< Offload features. */ + + /* remaining bytes are set on RX when pulling packet from descriptor */ + MARKER rx_descriptor_fields1; + + /* + * The packet type, which is the combination of outer/inner L2, L3, L4 + * and tunnel types. The packet_type is about data really present in the + * mbuf. Example: if vlan stripping is enabled, a received vlan packet + * would have RTE_PTYPE_L2_ETHER and not RTE_PTYPE_L2_VLAN because the + * vlan is stripped from the data. + */ + RTE_STD_C11 + union { + uint32_t packet_type; /**< L2/L3/L4 and tunnel information. */ + struct { + uint32_t l2_type:4; /**< (Outer) L2 type. */ + uint32_t l3_type:4; /**< (Outer) L3 type. */ + uint32_t l4_type:4; /**< (Outer) L4 type. */ + uint32_t tun_type:4; /**< Tunnel type. */ + uint32_t inner_l2_type:4; /**< Inner L2 type. */ + uint32_t inner_l3_type:4; /**< Inner L3 type. */ + uint32_t inner_l4_type:4; /**< Inner L4 type. */ + }; + }; + + uint32_t pkt_len; /**< Total pkt len: sum of all segments. */ + uint16_t data_len; /**< Amount of data in segment buffer. */ + /** VLAN TCI (CPU order), valid if PKT_RX_VLAN_STRIPPED is set. */ + uint16_t vlan_tci; + + union { + uint32_t rss; /**< RSS hash result if RSS enabled */ + struct { + RTE_STD_C11 + union { + struct { + uint16_t hash; + uint16_t id; + }; + uint32_t lo; + /**< Second 4 flexible bytes */ + }; + uint32_t hi; + /**< First 4 flexible bytes or FD ID, dependent on + PKT_RX_FDIR_* flag in ol_flags. */ + } fdir; /**< Filter identifier if FDIR enabled */ + struct { + uint32_t lo; + uint32_t hi; + } sched; /**< Hierarchical scheduler */ + uint32_t usr; /**< User defined tags. See rte_distributor_process() */ + } hash; /**< hash information */ + + uint32_t seqn; /**< Sequence number. See also rte_reorder_insert() */ + + /** Outer VLAN TCI (CPU order), valid if PKT_RX_QINQ_STRIPPED is set. */ + uint16_t vlan_tci_outer; + + /* second cache line - fields only used in slow path or on TX */ + MARKER cacheline1 __rte_cache_min_aligned; + + RTE_STD_C11 + union { + void *userdata; /**< Can be used for external metadata */ + uint64_t udata64; /**< Allow 8-byte userdata on 32-bit */ + }; + + struct rte_mempool *pool; /**< Pool from which mbuf was allocated. */ + struct rte_mbuf *next; /**< Next segment of scattered packet. */ + + /* fields to support TX offloads */ + RTE_STD_C11 + union { + uint64_t tx_offload; /**< combined for easy fetch */ + __extension__ + struct { + uint64_t l2_len:7; + /**< L2 (MAC) Header Length for non-tunneling pkt. + * Outer_L4_len + ... + Inner_L2_len for tunneling pkt. + */ + uint64_t l3_len:9; /**< L3 (IP) Header Length. */ + uint64_t l4_len:8; /**< L4 (TCP/UDP) Header Length. */ + uint64_t tso_segsz:16; /**< TCP TSO segment size */ + + /* fields for TX offloading of tunnels */ + uint64_t outer_l3_len:9; /**< Outer L3 (IP) Hdr Length. */ + uint64_t outer_l2_len:7; /**< Outer L2 (MAC) Hdr Length. */ + + /* uint64_t unused:8; */ + }; + }; + + /** Size of the application private data. In case of an indirect + * mbuf, it stores the direct mbuf private data size. */ + uint16_t priv_size; + + /** Timesync flags for use with IEEE1588. */ + uint16_t timesync; +} __rte_cache_aligned; |